Skip to contentSkip to conversation

regulator: bd71828: remove get_voltage operation

PATCH In review Matti Vaittinen 2 participants 2 messages Dec 19, 2019 – Dec 20, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 regulator: bd71828: remove get_voltage operation

Simplify LDO6 voltage getting on BD71828 by removing the get_voltage call-back and providing the fixed voltage in regulator_desc instead

---
 drivers/regulator/bd71828-regulator.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)
drivers/regulator/bd71828-regulator.c +1 -6
index edba51da5661..b2fa17be4988 100644
@@ -197,15 +197,9 @@ static const struct regulator_ops bd71828_ldo_ops = {
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 };
 
-static int bd71828_ldo6_get_voltage(struct regulator_dev *rdev)
-{
-	return BD71828_LDO_6_VOLTAGE;
-}
-
 static const struct regulator_ops bd71828_ldo6_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
-	.get_voltage = bd71828_ldo6_get_voltage,
 	.is_enabled = regulator_is_enabled_regmap,
 };
 
@@ -697,6 +691,7 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
 			.id = BD71828_LDO6,
 			.ops = &bd71828_ldo6_ops,
 			.type = REGULATOR_VOLTAGE,
+			.fixed_uV = BD71828_LDO_6_VOLTAGE,
 			.n_voltages = 1,
 			.enable_reg = BD71828_REG_LDO6_EN,
 			.enable_mask = BD71828_MASK_RUN_EN,

base-commit: 522498f8cb8c547f415a9a39fb54fd1f7e1a1eda

Signature · 14 lines
2.21.0


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =] 
maintainer
#1 lore raw

Applied "regulator: bd71828: remove get_voltage operation" to the regulator tree

The patch

regulator: bd71828: remove get_voltage operation

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.6

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From a14a0b5fc17901cdbc2e9d412e7ed4fbd75e284c Mon Sep 17 00:00:00 2001
From: Matti Vaittinen <[email protected]>
Date: Thu, 19 Dec 2019 13:34:44 +0200
Subject: [PATCH] regulator: bd71828: remove get_voltage operation

Simplify LDO6 voltage getting on BD71828 by removing the get_voltage call-back and providing the fixed voltage in regulator_desc instead

---
 drivers/regulator/bd71828-regulator.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)
drivers/regulator/bd71828-regulator.c +1 -6
index edba51da5661..b2fa17be4988 100644
@@ -197,15 +197,9 @@ static const struct regulator_ops bd71828_ldo_ops = {
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 };
 
-static int bd71828_ldo6_get_voltage(struct regulator_dev *rdev)
-{
-	return BD71828_LDO_6_VOLTAGE;
-}
-
 static const struct regulator_ops bd71828_ldo6_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
-	.get_voltage = bd71828_ldo6_get_voltage,
 	.is_enabled = regulator_is_enabled_regmap,
 };
 
@@ -697,6 +691,7 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
 			.id = BD71828_LDO6,
 			.ops = &bd71828_ldo6_ops,
 			.type = REGULATOR_VOLTAGE,
+			.fixed_uV = BD71828_LDO_6_VOLTAGE,
 			.n_voltages = 1,
 			.enable_reg = BD71828_REG_LDO6_EN,
 			.enable_mask = BD71828_MASK_RUN_EN,
Signature · 1 line
2.20.1