Skip to contentSkip to conversation

mx51evk: Fix U-Boot corruption after saving the environment

PATCH New Fabio Estevam 2 participants 2 messages Dec 19, 2019 – Dec 28, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mx51evk: Fix U-Boot corruption after saving the environment

U-Boot binary has grown in such a way that it goes beyond the reserved area for the environment variables.

Running "saveenv" followed by a "reset" causes U-Boot to hang because of this overlap.

Fix this problem by increasing the CONFIG_ENV_OFFSET size.

Also, in order to prevent this same problem to happen in the future, use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time.

CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare CONFIG_ENV_OFFSET with its direct value instead.

---
Tom,

I cannot use the thumb trick here because of the erratum.

 configs/mx51evk_defconfig |  2 +-
 include/configs/mx51evk.h | 13 +++++++++++++
 2 files changed, 14 insertions(+), 1 deletion(-)
configs/mx51evk_defconfig +1 -1
index 1505459259..a2af8ae7b2 100644
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX5=y
 CONFIG_SYS_TEXT_BASE=0x97800000
 CONFIG_TARGET_MX51EVK=y
 CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x60000
+CONFIG_ENV_OFFSET=0xC0000
 CONFIG_NR_DRAM_BANKS=1
 # CONFIG_CMD_BMODE is not set
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx51evk/imximage.cfg"
include/configs/mx51evk.h +13 -0
index 71ff789381..10aa1bcd87 100644
@@ -182,6 +182,19 @@
 /*-----------------------------------------------------------------------
  * environment organization
  */
+
+/*
+ * Environment starts at CONFIG_ENV_OFFSET=0xC0000 = 768k = 768 * 1024 = 786432
+ *
+ * Detect overlap between U-Boot image and environment area in build-time
+ *
+ * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset
+ * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
+ *
+ * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
+ * write the direct value here
+ */
+#define CONFIG_BOARD_SIZE_LIMIT		785408
 #define CONFIG_SYS_MMC_ENV_DEV 0
 
 #endif
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 mx51evk: Fix U-Boot corruption after saving the environment

Quoted 10 lines

U-Boot binary has grown in such a way that it goes beyond the reserved area for the environment variables.
Running "saveenv" followed by a "reset" causes U-Boot to hang because of this overlap.
Fix this problem by increasing the CONFIG_ENV_OFFSET size. Also, in order to prevent this same problem to happen in the future, use CONFIG_BOARD_SIZE_LIMIT, which will detect the overlap in build-time. CONFIG_BOARD_SIZE_LIMIT does not accept math expressions, so declare CONFIG_ENV_OFFSET with its direct value instead.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================