Add DU support
cover Add DU support
This patch series add DU support for iWave iwg20d platform based on RZ/G1N.
This patch series is based on linux-4.4.y-cip and all the patches in this series are cherry-picked from upstream.
Biju Das (3):
dt-bindings: display: renesas: du: Document the r8a7744 bindings
drm: rcar-du: Add R8A7744 support
ARM: dts: r8a7744: Add DU support
Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++ arch/arm/boot/dts/r8a7744.dtsi | 10 +++++++++- drivers/gpu/drm/rcar-du/rcar_du_drv.c | 3 ++- 3 files changed, 13 insertions(+), 2 deletions(-)
Signature · 1 line
2.7.4
PATCH 1/3 dt-bindings: display: renesas: du: Document the r8a7744 bindings
From: Biju Das <[email protected]>
commit 5eb08d995564c9f9d4818a84050f7716b73c86cc upstream.
Document the RZ/G1N (R8A7744) SoC in the R-Car DU bindings.
--- Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/display/renesas,du.txt +2 -0
@@ -4,6 +4,7 @@ Required Properties: - compatible: must be one of the following. - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU + - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
@@ -46,6 +47,7 @@ corresponding to each DU output. Port 0 Port1 Port2 ----------------------------------------------------------------------------- R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - + R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - R8A7779 (R-Car H1) DPAD 0 DPAD 1 - R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1
Signature · 1 line
2.7.4
PATCH 2/3 drm: rcar-du: Add R8A7744 support
In reply to Marian-Cristian RotariuFrom: Biju Das <[email protected]>
commit 5dc34af19c98171174f563a4b9f79a902bf665b4 upstream.
Add support for the R8A7744 DU (which is very similar to the R8A7743 DU); it has 1 DPAD (RGB) output and 1 LVDS output.
--- drivers/gpu/drm/rcar-du/rcar_du_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/rcar-du/rcar_du_drv.c +2 -1
@@ -41,7 +41,7 @@ static const struct rcar_du_device_info rzg1_du_r8a7743_info = { .num_crtcs = 2, .routes = {/* -* R8A7743 has one RGB output and one LVDS output +* R8A774[34] has one RGB output and one LVDS output */ [RCAR_DU_OUTPUT_DPAD0] = { .possible_crtcs = BIT(1) | BIT(0),
@@ -175,6 +175,7 @@ static const struct rcar_du_device_info rcar_du_r8a7794_info = {static const struct of_device_id rcar_du_of_table[] = { { .compatible ="renesas,du-r8a7743" , .data = &rzg1_du_r8a7743_info }, + { .compatible ="renesas,du-r8a7744" , .data = &rzg1_du_r8a7743_info }, { .compatible ="renesas,du-r8a7745" , .data = &rzg1_du_r8a7745_info }, { .compatible ="renesas,du-r8a7779" , .data = &rcar_du_r8a7779_info }, { .compatible ="renesas,du-r8a7790" , .data = &rcar_du_r8a7790_info },
Signature · 1 line
2.7.4
PATCH 3/3 ARM: dts: r8a7744: Add DU support
In reply to Marian-Cristian RotariuFrom: Biju Das <[email protected]>
commit 5f152018d340d90c185ced8ef6230b7044ea5540 upstream.
Add du node to r8a7744 SoC DT. Boards that want to enable the DU need to specify the output topology.
--- arch/arm/boot/dts/r8a7744.dtsi | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
arch/arm/boot/dts/r8a7744.dtsi +9 -1
@@ -1278,8 +1278,17 @@ }; du: display at feb00000 { + compatible = "renesas,du-r8a7744"; reg = <0 0xfeb00000 0 0x40000>, <0 0xfeb90000 0 0x1c>; + reg-names = "du", "lvds.0"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7744_CLK_DU0>, + <&mstp7_clks R8A7744_CLK_DU1>, + <&mstp7_clks R8A7744_CLK_LVDS0>; + clock-names = "du.0", "du.1", "lvds.0"; + status = "disabled"; ports { #address-cells = <1>;
@@ -1296,7 +1305,6 @@ }; }; }; - /* placeholder */ }; cmt0: timer at ffca0000 {
Signature · 1 line
2.7.4
cover Add DU support
In reply to Marian-Cristian RotariuHi Marian,
Quoted 22 lines
-----Original Message-----
From: Marian-Cristian Rotariu [mailto:marian-cristian.rotariu.rb at bp.renesas.com]
Sent: Friday, December 20, 2019 12:06 AM
To: cip-dev at lists.cip-project.org; iwamatsu nobuhiro(?? ?? ??? ?????) <[email protected]>; Pavel Machek <[email protected]>
Cc: Chris Paterson <[email protected]>; Biju Das <[email protected]>; Fabrizio Castro <[email protected]>
Subject: [PATCH 4.4.y-cip 0/3] Add DU supportThis patch series add DU support for iWave iwg20d platform based on RZ/G1N.
This patch series is based on linux-4.4.y-cip and all the patches in this series are cherry-picked from upstream.
Biju Das (3):
dt-bindings: display: renesas: du: Document the r8a7744 bindings
drm: rcar-du: Add R8A7744 support
ARM: dts: r8a7744: Add DU support
Quoted 5 lines
Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++ arch/arm/boot/dts/r8a7744.dtsi | 10 +++++++++- drivers/gpu/drm/rcar-du/rcar_du_drv.c | 3 ++- 3 files changed, 13 insertions(+), 2 deletions(-)
Looks good to me these patches.
If other reviewer have no opinion, I will apply this series.
Best regards,
Nobuhiro.
cover Add DU support
Hi!
Quoted 10 lines
Quoted 10 lines
This patch series add DU support for iWave iwg20d platform based on RZ/G1N.
This patch series is based on linux-4.4.y-cip and all the patches in this series are cherry-picked from upstream.
Biju Das (3):
dt-bindings: display: renesas: du: Document the r8a7744 bindings
drm: rcar-du: Add R8A7744 support
ARM: dts: r8a7744: Add DU support
Quoted 8 lines
Quoted 5 lines
Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++ arch/arm/boot/dts/r8a7744.dtsi | 10 +++++++++- drivers/gpu/drm/rcar-du/rcar_du_drv.c | 3 ++- 3 files changed, 13 insertions(+), 2 deletions(-)Looks good to me these patches.
If other reviewer have no opinion, I will apply this series.
Looks good to me, too. Go ahead :-).
Pavel
Signature · 9 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: Digital signature URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20191220/5ef2b6f3/attachment.sig>
cover Add DU support
Hi,
Quoted 29 lines
-----Original Message-----
From: Pavel Machek [mailto:pavel at denx.de]
Sent: Friday, December 20, 2019 5:16 PM
To: iwamatsu nobuhiro(?? ?? ????????) <[email protected]>
Cc: marian-cristian.rotariu.rb at bp.renesas.com; cip-dev at lists.cip-project.org; pavel at denx.de; chris.paterson2 at renesas.com; biju.das at bp.renesas.com; fabrizio.castro at bp.renesas.com
Subject: Re: [PATCH 4.4.y-cip 0/3] Add DU supportHi!
Quoted 1 line
Quoted 1 line
This patch series add DU support for iWave iwg20d platform based on
RZ/G1N.
Quoted 2 lines
Quoted 2 lines
This patch series is based on linux-4.4.y-cip and all the patches
in
Quoted 11 lines
Quoted 11 lines
this series are cherry-picked from upstream.
Biju Das (3):
dt-bindings: display: renesas: du: Document the r8a7744 bindings
drm: rcar-du: Add R8A7744 support
ARM: dts: r8a7744: Add DU supportDocumentation/devicetree/bindings/display/renesas,du.txt | 2 ++ arch/arm/boot/dts/r8a7744.dtsi | 10 +++++++++- drivers/gpu/drm/rcar-du/rcar_du_drv.c | 3
Quoted 7 lines
++-
Quoted 4 lines
Quoted 1 line
3 files changed, 13 insertions(+), 2 deletions(-)Looks good to me these patches.
If other reviewer have no opinion, I will apply this series.Looks good to me, too. Go ahead :-).
Thanks, Pavel.
Applied.
Best regards,
Nobuhiro