Skip to contentSkip to conversation

iio: add driver for Bosch BMA400 accelerometer

PATCH In review Dan Robertson 5 participants 14 messages Dec 20, 2019 – Dec 29, 2019

Subsystems (3)
lore
Share & tools
lore

Dan Robertson

author maintainer
#0 lore raw

v8 cover iio: add driver for Bosch BMA400 accelerometer

I made basic improvements based on the previous code including removing the use of division when setting the scale and setting the sample frequency and using devm_regulator_bulk_get.

Cheers,

- Dan

Changes in v8:
* Fixup MAINTAINERS entry
* Remove the use od division when setting scale and sample frequency
* Use devm_regulator_bulk_get

Changes in v7:

* Added MAINTAINERS entry
* Added basic vddio and vdd regulator support
* Added vddio and vdd supply to devicetree bindings
* Added interrupts to devicetree bindings

Changes in v6:

* Improve readability Kconfig options

Changes in v5:

* Move to using a function instead of lookup tables for scale and frequency conversions.
* Rename DT bindings to bosch,bma400.yaml
* Fixed other errors and improvements found by reviewers

Changes in v4:

* Fix error in DT bindings
* Fix typo when setting the OSR
* Simplified the cached sample frequency
* Fix the MODULE_LICENSE

Changes in v3:

* Use yaml format for DT bindings
* Remove strict dependency on OF
* Tidy Kconfig dependencies
* Stylistic changes
* Do not soft-reset device on remove

Changes in v2:

* Implemented iio_info -> read_avail
* Stylistic changes
* Implemented devicetree bindings

Dan Robertson (3):
dt-bindings: iio: accel: bma400: add bindings
iio: (bma400) add driver for the BMA400
iio: (bma400) basic regulator support

 .../bindings/iio/accel/bosch,bma400.yaml      |  54 ++
 MAINTAINERS                                   |   7 +
 drivers/iio/accel/Kconfig                     |  17 +
 drivers/iio/accel/Makefile                    |   2 +
 drivers/iio/accel/bma400.h                    |  99 ++
 drivers/iio/accel/bma400_core.c               | 849 ++++++++++++++++++
 drivers/iio/accel/bma400_i2c.c                |  61 ++
 7 files changed, 1089 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
 create mode 100644 drivers/iio/accel/bma400.h
 create mode 100644 drivers/iio/accel/bma400_core.c
 create mode 100644 drivers/iio/accel/bma400_i2c.c
author maintainer
#1 lore raw

PATCH v8 1/3 dt-bindings: iio: accel: bma400: add bindings

Add devicetree binding for the Bosch BMA400 3-axes ultra-low power accelerometer sensor.

---
 .../bindings/iio/accel/bosch,bma400.yaml      | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml new file +54 -0
new file mode 100644
index 000000000000..e87cb636b3e2
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA400 triaxial acceleration sensor
+
+maintainers:
+  - Dan Robertson <[email protected]>
+
+description: |
+  Acceleration and temerature iio sensors with an i2c interface
+
+  Specifications about the sensor can be found at:
+    https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf
+
+properties:
+  compatible:
+    enum:
+      - bosch,bma400
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: phandle to the regulator that provides power to the accelerometer
+
+  vddio-supply:
+    description: phandle to the regulator that provides power to the sensor's IO
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      accelerometer@14 {
+        compatible = "bosch,bma400";
+        reg = <0x14>;
+        vdd-supply = <&vdd>;
+        vddio-supply = <&vddio>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
maintainer
#3 lore raw

Re: [PATCH v8 1/3] dt-bindings: iio: accel: bma400: add bindings

Quoted 8 lines · On Fri, 20 Dec 2019 17:34:52 +0100 Linus Walleij <[email protected]>…
Quoted 4 lines · Dan Robertson

Add devicetree binding for the Bosch BMA400 3-axes ultra-low power accelerometer sensor.

Applied to the togreg branch of iio.git and pushed out as testing.

This one seems straight forward, but if anyone else wants to comment, I won't be pushing out as non rebasing until next week so can add tags etc.

Thanks,

Jonathan

Quoted 3 lines

Yours,
Linus Walleij

maintainer Reviewed-by on v8 1/3
#4 lore raw

Re: [PATCH v8 1/3] dt-bindings: iio: accel: bma400: add bindings

In reply to Dan Robertson
Quoted 18 lines · Dan Robertson

Add devicetree binding for the Bosch BMA400 3-axes ultra-low power accelerometer sensor.

---
 .../bindings/iio/accel/bosch,bma400.yaml      | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml new file +3 -0
new file mode 100644
index 000000000000..e87cb636b3e2
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---

Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml line 13

Quoted 10 lines
Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml new file +10 -0
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA400 triaxial acceleration sensor
+
+maintainers:
+  - Dan Robertson <[email protected]>
+
+description: |
+  Acceleration and temerature iio sensors with an i2c interface

checkpatch reports a typo here.

Otherwise,

maintainer
#5 lore raw

Re: [PATCH v8 1/3] dt-bindings: iio: accel: bma400: add bindings

Quoted 32 lines · On Thu, 26 Dec 2019 16:03:59 -0700 Rob Herring <[email protected]> wrote:
Quoted 18 lines · Dan Robertson

Add devicetree binding for the Bosch BMA400 3-axes ultra-low power accelerometer sensor.

---
 .../bindings/iio/accel/bosch,bma400.yaml      | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml new file +3 -0
new file mode 100644
index 000000000000..e87cb636b3e2
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---

Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml line 13

Quoted 10 lines
Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml new file +10 -0
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA400 triaxial acceleration sensor
+
+maintainers:
+  - Dan Robertson <[email protected]>
+
+description: |
+  Acceleration and temerature iio sensors with an i2c interface  

checkpatch reports a typo here.

Quoted 3 lines

Otherwise,

Fixed up and tag added. Thanks,

Jonathan

author maintainer
#6 lore raw

Re: [PATCH v8 1/3] dt-bindings: iio: accel: bma400: add bindings

Quoted 35 lines · Jonathan Cameron
Quoted 32 lines · On Thu, 26 Dec 2019 16:03:59 -0700 Rob Herring <[email protected]> wrote:
Quoted 18 lines · Dan Robertson

Add devicetree binding for the Bosch BMA400 3-axes ultra-low power accelerometer sensor.

---
 .../bindings/iio/accel/bosch,bma400.yaml      | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml new file +3 -0
new file mode 100644
index 000000000000..e87cb636b3e2
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---

Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml line 13

Quoted 10 lines
Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml new file +10 -0
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA400 triaxial acceleration sensor
+
+maintainers:
+  - Dan Robertson <[email protected]>
+
+description: |
+  Acceleration and temerature iio sensors with an i2c interface  

checkpatch reports a typo here.

Quoted 4 lines
Quoted 3 lines

Otherwise,

Fixed up and tag added. Thanks,

Thanks for fixing this. Wasn't sure if this would necessitate another patchset version.

Cheers,

- Dan

author maintainer
#7 lore raw

PATCH v8 2/3 iio: (bma400) add driver for the BMA400

In reply to Dan Robertson

Add a IIO driver for the Bosch BMA400 3-axes ultra-low power accelerometer. The driver supports reading from the acceleration and temperature registers. The driver also supports reading and configuring the output data rate, oversampling ratio, and scale.

---
 MAINTAINERS                     |   7 +
 drivers/iio/accel/Kconfig       |  16 +
 drivers/iio/accel/Makefile      |   2 +
 drivers/iio/accel/bma400.h      |  95 ++++
 drivers/iio/accel/bma400_core.c | 820 ++++++++++++++++++++++++++++++++
 drivers/iio/accel/bma400_i2c.c  |  61 +++
 6 files changed, 1001 insertions(+)
 create mode 100644 drivers/iio/accel/bma400.h
 create mode 100644 drivers/iio/accel/bma400_core.c
 create mode 100644 drivers/iio/accel/bma400_i2c.c
MAINTAINERS +7 -0
index ec020dc504ca..a5f2cb0de34d 100644
@@ -3047,6 +3047,13 @@ S:	Supported
 F:	drivers/net/bonding/
 F:	include/uapi/linux/if_bonding.h
 
+BOSCH SENSORTEC BMA400 ACCELEROMETER IIO DRIVER
+M:	Dan Robertson <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/iio/accel/bma400*
+F:	Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
+
 BPF (Safe dynamic programs and tools)
 M:	Alexei Starovoitov <[email protected]>
 M:	Daniel Borkmann <[email protected]>
drivers/iio/accel/Kconfig +16 -0
index d4ef35aeb579..670e60568033 100644
@@ -112,6 +112,22 @@ config BMA220
 	  To compile this driver as a module, choose M here: the
 	  module will be called bma220_spi.
 
+config BMA400
+	tristate "Bosch BMA400 3-Axis Accelerometer Driver"
+	select REGMAP
+	select BMA400_I2C if I2C
+	help
+	  Say Y here if you want to build a driver for the Bosch BMA400
+	  triaxial acceleration sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bma400_core and you will also get
+	  bma400_i2c if I2C is enabled.
+
+config BMA400_I2C
+	tristate
+	depends on BMA400
+
 config BMC150_ACCEL
 	tristate "Bosch BMC150 Accelerometer Driver"
 	select IIO_BUFFER
drivers/iio/accel/Makefile +2 -0
index 56bd0215e0d4..3a051cf37f40 100644
@@ -14,6 +14,8 @@ obj-$(CONFIG_ADXL372_I2C) += adxl372_i2c.o
 obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o
 obj-$(CONFIG_BMA180) += bma180.o
 obj-$(CONFIG_BMA220) += bma220_spi.o
+obj-$(CONFIG_BMA400) += bma400_core.o
+obj-$(CONFIG_BMA400_I2C) += bma400_i2c.o
 obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
 obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
 obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
drivers/iio/accel/bma400.h new file +95 -0

95 lines not on this page · raw message

drivers/iio/accel/bma400_core.c new file +820 -0

820 lines not on this page · raw message

drivers/iio/accel/bma400_i2c.c new file +61 -0

61 lines not on this page · raw message

Reviewed-by on v8 2/3
#8 lore raw

Re: [PATCH v8 2/3] iio: (bma400) add driver for the BMA400

Quoted 6 lines · Dan Robertson

Add a IIO driver for the Bosch BMA400 3-axes ultra-low power accelerometer. The driver supports reading from the acceleration and temperature registers. The driver also supports reading and configuring the output data rate, oversampling ratio, and scale.

Yours,
Linus Walleij

Reviewed-by on v8 2/3
#9 lore raw

Re: [PATCH v8 2/3] iio: (bma400) add driver for the BMA400

In reply to Dan Robertson
Quoted 5 lines · Dan Robertson

Add a IIO driver for the Bosch BMA400 3-axes ultra-low power accelerometer. The driver supports reading from the acceleration and temperature registers. The driver also supports reading and configuring the output data rate, oversampling ratio, and scale.

One comment below.

Quoted 479 lines
---
 MAINTAINERS                     |   7 +
 drivers/iio/accel/Kconfig       |  16 +
 drivers/iio/accel/Makefile      |   2 +
 drivers/iio/accel/bma400.h      |  95 ++++
 drivers/iio/accel/bma400_core.c | 820 ++++++++++++++++++++++++++++++++
 drivers/iio/accel/bma400_i2c.c  |  61 +++
 6 files changed, 1001 insertions(+)
 create mode 100644 drivers/iio/accel/bma400.h
 create mode 100644 drivers/iio/accel/bma400_core.c
 create mode 100644 drivers/iio/accel/bma400_i2c.c
MAINTAINERS +7 -0
index ec020dc504ca..a5f2cb0de34d 100644
@@ -3047,6 +3047,13 @@ S:       Supported
 F:     drivers/net/bonding/
 F:     include/uapi/linux/if_bonding.h
 
+BOSCH SENSORTEC BMA400 ACCELEROMETER IIO DRIVER
+M:     Dan Robertson <[email protected]>
+L:     [email protected]
+S:     Maintained
+F:     drivers/iio/accel/bma400*
+F:     Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
+
 BPF (Safe dynamic programs and tools)
 M:     Alexei Starovoitov <[email protected]>
 M:     Daniel Borkmann <[email protected]>
drivers/iio/accel/Kconfig +16 -0
index d4ef35aeb579..670e60568033 100644
@@ -112,6 +112,22 @@ config BMA220
          To compile this driver as a module, choose M here: the
          module will be called bma220_spi.
 
+config BMA400
+       tristate "Bosch BMA400 3-Axis Accelerometer Driver"
+       select REGMAP
+       select BMA400_I2C if I2C
+       help
+         Say Y here if you want to build a driver for the Bosch BMA400
+         triaxial acceleration sensor.
+
+         To compile this driver as a module, choose M here: the
+         module will be called bma400_core and you will also get
+         bma400_i2c if I2C is enabled.
+
+config BMA400_I2C
+       tristate
+       depends on BMA400
+
 config BMC150_ACCEL
        tristate "Bosch BMC150 Accelerometer Driver"
        select IIO_BUFFER
drivers/iio/accel/Makefile +2 -0
index 56bd0215e0d4..3a051cf37f40 100644
@@ -14,6 +14,8 @@ obj-$(CONFIG_ADXL372_I2C) += adxl372_i2c.o
 obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o
 obj-$(CONFIG_BMA180) += bma180.o
 obj-$(CONFIG_BMA220) += bma220_spi.o
+obj-$(CONFIG_BMA400) += bma400_core.o
+obj-$(CONFIG_BMA400_I2C) += bma400_i2c.o
 obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
 obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
 obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
drivers/iio/accel/bma400.h new file +95 -0
new file mode 100644
index 000000000000..15c0e307d2c4
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Register constants and other forward declarations needed by the bma400
+ * sources.
+ *
+ * Copyright 2019 Dan Robertson <[email protected]>
+ */
+
+#ifndef _BMA400_H_
+#define _BMA400_H_
+
+#include <linux/bits.h>
+#include <linux/regmap.h>
+
+/*
+ * Read-Only Registers
+ */
+
+/* Status and ID registers */
+#define BMA400_CHIP_ID_REG          0x00
+#define BMA400_ERR_REG              0x02
+#define BMA400_STATUS_REG           0x03
+
+/* Acceleration registers */
+#define BMA400_X_AXIS_LSB_REG       0x04
+#define BMA400_X_AXIS_MSB_REG       0x05
+#define BMA400_Y_AXIS_LSB_REG       0x06
+#define BMA400_Y_AXIS_MSB_REG       0x07
+#define BMA400_Z_AXIS_LSB_REG       0x08
+#define BMA400_Z_AXIS_MSB_REG       0x09
+
+/* Sensor time registers */
+#define BMA400_SENSOR_TIME0         0x0a
+#define BMA400_SENSOR_TIME1         0x0b
+#define BMA400_SENSOR_TIME2         0x0c
+
+/* Event and interrupt registers */
+#define BMA400_EVENT_REG            0x0d
+#define BMA400_INT_STAT0_REG        0x0e
+#define BMA400_INT_STAT1_REG        0x0f
+#define BMA400_INT_STAT2_REG        0x10
+
+/* Temperature register */
+#define BMA400_TEMP_DATA_REG        0x11
+
+/* FIFO length and data registers */
+#define BMA400_FIFO_LENGTH0_REG     0x12
+#define BMA400_FIFO_LENGTH1_REG     0x13
+#define BMA400_FIFO_DATA_REG        0x14
+
+/* Step count registers */
+#define BMA400_STEP_CNT0_REG        0x15
+#define BMA400_STEP_CNT1_REG        0x16
+#define BMA400_STEP_CNT3_REG        0x17
+#define BMA400_STEP_STAT_REG        0x18
+
+/*
+ * Read-write configuration registers
+ */
+#define BMA400_ACC_CONFIG0_REG      0x19
+#define BMA400_ACC_CONFIG1_REG      0x1a
+#define BMA400_ACC_CONFIG2_REG      0x1b
+#define BMA400_CMD_REG              0x7e
+
+/* Chip ID of BMA 400 devices found in the chip ID register. */
+#define BMA400_ID_REG_VAL           0x90
+
+#define BMA400_LP_OSR_SHIFT         5
+#define BMA400_NP_OSR_SHIFT         4
+#define BMA400_SCALE_SHIFT          6
+
+#define BMA400_TWO_BITS_MASK        GENMASK(1, 0)
+#define BMA400_LP_OSR_MASK          GENMASK(6, 5)
+#define BMA400_NP_OSR_MASK          GENMASK(5, 4)
+#define BMA400_ACC_ODR_MASK         GENMASK(3, 0)
+#define BMA400_ACC_SCALE_MASK       GENMASK(7, 6)
+
+#define BMA400_ACC_ODR_MIN_RAW      0x05
+#define BMA400_ACC_ODR_LP_RAW       0x06
+#define BMA400_ACC_ODR_MAX_RAW      0x0b
+
+#define BMA400_ACC_ODR_MAX_HZ       800
+#define BMA400_ACC_ODR_MIN_WHOLE_HZ 25
+#define BMA400_ACC_ODR_MIN_HZ       12
+
+#define BMA400_SCALE_MIN            38357
+#define BMA400_SCALE_MAX            306864
+
+extern const struct regmap_config bma400_regmap_config;
+
+int bma400_probe(struct device *dev, struct regmap *regmap, const char *name);
+
+int bma400_remove(struct device *dev);
+
+#endif
drivers/iio/accel/bma400_core.c new file +300 -0
new file mode 100644
index 000000000000..e7ba01e79d2c
@@ -0,0 +1,820 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Core IIO driver for Bosch BMA400 triaxial acceleration sensor.
+ *
+ * Copyright 2019 Dan Robertson <[email protected]>
+ *
+ * TODO:
+ *  - Support for power management
+ *  - Support events and interrupts
+ *  - Create channel for step count
+ *  - Create channel for sensor time
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+
+#include "bma400.h"
+
+/*
+ * The G-range selection may be one of 2g, 4g, 8, or 16g. The scale may
+ * be selected with the acc_range bits of the ACC_CONFIG1 register.
+ * NB: This buffer is populated in the device init.
+ */
+static int bma400_scales[8];
+
+/*
+ * See the ACC_CONFIG1 section of the datasheet.
+ * NB: This buffer is populated in the device init.
+ */
+static int bma400_sample_freqs[14];
+
+static const int bma400_osr_range[] = { 0, 1, 3 };
+
+/* See the ACC_CONFIG0 section of the datasheet */
+enum bma400_power_mode {
+       POWER_MODE_SLEEP   = 0x00,
+       POWER_MODE_LOW     = 0x01,
+       POWER_MODE_NORMAL  = 0x02,
+       POWER_MODE_INVALID = 0x03,
+};
+
+struct bma400_sample_freq {
+       int hz;
+       int uhz;
+};
+
+struct bma400_data {
+       struct device *dev;
+       struct regmap *regmap;
+       struct mutex mutex; /* data register lock */
+       struct iio_mount_matrix orientation;
+       enum bma400_power_mode power_mode;
+       struct bma400_sample_freq sample_freq;
+       int oversampling_ratio;
+       int scale;
+};
+
+static bool bma400_is_writable_reg(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case BMA400_CHIP_ID_REG:
+       case BMA400_ERR_REG:
+       case BMA400_STATUS_REG:
+       case BMA400_X_AXIS_LSB_REG:
+       case BMA400_X_AXIS_MSB_REG:
+       case BMA400_Y_AXIS_LSB_REG:
+       case BMA400_Y_AXIS_MSB_REG:
+       case BMA400_Z_AXIS_LSB_REG:
+       case BMA400_Z_AXIS_MSB_REG:
+       case BMA400_SENSOR_TIME0:
+       case BMA400_SENSOR_TIME1:
+       case BMA400_SENSOR_TIME2:
+       case BMA400_EVENT_REG:
+       case BMA400_INT_STAT0_REG:
+       case BMA400_INT_STAT1_REG:
+       case BMA400_INT_STAT2_REG:
+       case BMA400_TEMP_DATA_REG:
+       case BMA400_FIFO_LENGTH0_REG:
+       case BMA400_FIFO_LENGTH1_REG:
+       case BMA400_FIFO_DATA_REG:
+       case BMA400_STEP_CNT0_REG:
+       case BMA400_STEP_CNT1_REG:
+       case BMA400_STEP_CNT3_REG:
+       case BMA400_STEP_STAT_REG:
+               return false;
+       default:
+               return true;
+       }
+}
+
+static bool bma400_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case BMA400_ERR_REG:
+       case BMA400_STATUS_REG:
+       case BMA400_X_AXIS_LSB_REG:
+       case BMA400_X_AXIS_MSB_REG:
+       case BMA400_Y_AXIS_LSB_REG:
+       case BMA400_Y_AXIS_MSB_REG:
+       case BMA400_Z_AXIS_LSB_REG:
+       case BMA400_Z_AXIS_MSB_REG:
+       case BMA400_SENSOR_TIME0:
+       case BMA400_SENSOR_TIME1:
+       case BMA400_SENSOR_TIME2:
+       case BMA400_EVENT_REG:
+       case BMA400_INT_STAT0_REG:
+       case BMA400_INT_STAT1_REG:
+       case BMA400_INT_STAT2_REG:
+       case BMA400_TEMP_DATA_REG:
+       case BMA400_FIFO_LENGTH0_REG:
+       case BMA400_FIFO_LENGTH1_REG:
+       case BMA400_FIFO_DATA_REG:
+       case BMA400_STEP_CNT0_REG:
+       case BMA400_STEP_CNT1_REG:
+       case BMA400_STEP_CNT3_REG:
+       case BMA400_STEP_STAT_REG:
+               return true;
+       default:
+               return false;
+       }
+}
+
+const struct regmap_config bma400_regmap_config = {
+       .reg_bits = 8,
+       .val_bits = 8,
+       .max_register = BMA400_CMD_REG,
+       .cache_type = REGCACHE_RBTREE,
+       .writeable_reg = bma400_is_writable_reg,
+       .volatile_reg = bma400_is_volatile_reg,
+};
+EXPORT_SYMBOL(bma400_regmap_config);
+
+static const struct iio_mount_matrix *
+bma400_accel_get_mount_matrix(const struct iio_dev *indio_dev,
+                             const struct iio_chan_spec *chan)
+{
+       struct bma400_data *data = iio_priv(indio_dev);
+
+       return &data->orientation;
+}
+
+static const struct iio_chan_spec_ext_info bma400_ext_info[] = {
+       IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, bma400_accel_get_mount_matrix),
+       { }
+};
+
+#define BMA400_ACC_CHANNEL(_axis) { \
+       .type = IIO_ACCEL, \
+       .modified = 1, \
+       .channel2 = IIO_MOD_##_axis, \
+       .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+       .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+               BIT(IIO_CHAN_INFO_SCALE) | \
+               BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+       .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+               BIT(IIO_CHAN_INFO_SCALE) | \
+               BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+       .ext_info = bma400_ext_info, \
+}
+
+static const struct iio_chan_spec bma400_channels[] = {
+       BMA400_ACC_CHANNEL(X),
+       BMA400_ACC_CHANNEL(Y),
+       BMA400_ACC_CHANNEL(Z),
+       {
+               .type = IIO_TEMP,
+               .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+               .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+       },
+};
+
+static int bma400_get_temp_reg(struct bma400_data *data, int *val, int *val2)
+{
+       unsigned int raw_temp;
+       int host_temp;
+       int ret;
+
+       if (data->power_mode == POWER_MODE_SLEEP)
+               return -EBUSY;
+
+       ret = regmap_read(data->regmap, BMA400_TEMP_DATA_REG, &raw_temp);
+       if (ret)
+               return ret;
+
+       host_temp = sign_extend32(raw_temp, 7);
+       /*
+        * The formula for the TEMP_DATA register in the datasheet
+        * is: x * 0.5 + 23
+        */
+       *val = (host_temp >> 1) + 23;
+       *val2 = (host_temp & 0x1) * 500000;
+       return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int bma400_get_accel_reg(struct bma400_data *data,
+                               const struct iio_chan_spec *chan,
+                               int *val)
+{
+       __le16 raw_accel;
+       int lsb_reg;
+       int ret;
+
+       if (data->power_mode == POWER_MODE_SLEEP)
+               return -EBUSY;
+
+       switch (chan->channel2) {
+       case IIO_MOD_X:
+               lsb_reg = BMA400_X_AXIS_LSB_REG;
+               break;
+       case IIO_MOD_Y:
+               lsb_reg = BMA400_Y_AXIS_LSB_REG;
+               break;
+       case IIO_MOD_Z:
+               lsb_reg = BMA400_Z_AXIS_LSB_REG;
+               break;
+       default:
+               dev_err(data->dev, "invalid axis channel modifier\n");
+               return -EINVAL;
+       }
+
+       /* bulk read two registers, with the base being the LSB register */
+       ret = regmap_bulk_read(data->regmap, lsb_reg, &raw_accel,
+                              sizeof(raw_accel));
+       if (ret)
+               return ret;
+
+       *val = sign_extend32(le16_to_cpu(raw_accel), 11);
+       return IIO_VAL_INT;
+}
+
+static void bma400_output_data_rate_from_raw(int raw, unsigned int *val,
+                                            unsigned int *val2)
+{
+       *val = BMA400_ACC_ODR_MAX_HZ >> (BMA400_ACC_ODR_MAX_RAW - raw);
+       if (raw > BMA400_ACC_ODR_MIN_RAW)
+               *val2 = 0;
+       else
+               *val2 = 500000;
+}
+
+static int bma400_get_accel_output_data_rate(struct bma400_data *data)
+{
+       unsigned int val;
+       unsigned int odr;
+       int ret;
+
+       switch (data->power_mode) {
+       case POWER_MODE_LOW:
+               /*
+                * Runs at a fixed rate in low-power mode. See section 4.3
+                * in the datasheet.
+                */
+               bma400_output_data_rate_from_raw(BMA400_ACC_ODR_LP_RAW,
+                                                &data->sample_freq.hz,
+                                                &data->sample_freq.uhz);
+               return 0;
+       case POWER_MODE_NORMAL:
+               /*
+                * In normal mode the ODR can be found in the ACC_CONFIG1
+                * register.
+                */
+               ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val);
+               if (ret)
+                       goto error;
+
+               odr = val & BMA400_ACC_ODR_MASK;
+               if (odr < BMA400_ACC_ODR_MIN_RAW ||
+                   odr > BMA400_ACC_ODR_MAX_RAW) {
+                       ret = -EINVAL;
+                       goto error;
+               }
+
+               bma400_output_data_rate_from_raw(odr, &data->sample_freq.hz,
+                                                &data->sample_freq.uhz);
+               return 0;
+       case POWER_MODE_SLEEP:
+               data->sample_freq.hz = 0;
+               data->sample_freq.uhz = 0;
+               return 0;
+       default:
+               ret = 0;
+               goto error;
+       }
+error:
+       data->sample_freq.hz = -1;
+       data->sample_freq.uhz = -1;
+       return ret;
+}
+
+static int bma400_set_accel_output_data_rate(struct bma400_data *data,
+                                            int hz, int uhz)
+{
+       unsigned int idx;
+       unsigned int odr;

drivers/iio/accel/bma400_core.c line 310

Quoted 10 lines
drivers/iio/accel/bma400_core.c new file +10 -0
+       unsigned int val;
+       int ret;
+
+       if (hz >= BMA400_ACC_ODR_MIN_WHOLE_HZ) {
+               if (uhz || hz > BMA400_ACC_ODR_MAX_HZ)
+                       return -EINVAL;
+
+               idx = __ffs(hz);
+
+               if (hz >> idx != BMA400_ACC_ODR_MIN_WHOLE_HZ)

Yeah, as I said it works if and only if the MIN_WHOLE_HZ % 2 == 1, i.e. odd number.
Luckily the constant is 25.

Perhaps it needs a comment somewhere.

Quoted 121 lines
drivers/iio/accel/bma400_core.c new file +121 -0
+                       return -EINVAL;
+
+               idx += BMA400_ACC_ODR_MIN_RAW + 1;
+       } else if (hz == BMA400_ACC_ODR_MIN_HZ && uhz == 500000) {
+               idx = BMA400_ACC_ODR_MIN_RAW;
+       } else {
+               return -EINVAL;
+       }
+
+       ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val);
+       if (ret)
+               return ret;
+
+       /* preserve the range and normal mode osr */
+       odr = (~BMA400_ACC_ODR_MASK & val) | idx;
+
+       ret = regmap_write(data->regmap, BMA400_ACC_CONFIG1_REG, odr);
+       if (ret)
+               return ret;
+
+       bma400_output_data_rate_from_raw(idx, &data->sample_freq.hz,
+                                        &data->sample_freq.uhz);
+       return 0;
+}
+
+static int bma400_get_accel_oversampling_ratio(struct bma400_data *data)
+{
+       unsigned int val;
+       unsigned int osr;
+       int ret;
+
+       /*
+        * The oversampling ratio is stored in a different register
+        * based on the power-mode. In normal mode the OSR is stored
+        * in ACC_CONFIG1. In low-power mode it is stored in
+        * ACC_CONFIG0.
+        */
+       switch (data->power_mode) {
+       case POWER_MODE_LOW:
+               ret = regmap_read(data->regmap, BMA400_ACC_CONFIG0_REG, &val);
+               if (ret) {
+                       data->oversampling_ratio = -1;
+                       return ret;
+               }
+
+               osr = (val & BMA400_LP_OSR_MASK) >> BMA400_LP_OSR_SHIFT;
+
+               data->oversampling_ratio = osr;
+               return 0;
+       case POWER_MODE_NORMAL:
+               ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val);
+               if (ret) {
+                       data->oversampling_ratio = -1;
+                       return ret;
+               }
+
+               osr = (val & BMA400_NP_OSR_MASK) >> BMA400_NP_OSR_SHIFT;
+
+               data->oversampling_ratio = osr;
+               return 0;
+       case POWER_MODE_SLEEP:
+               data->oversampling_ratio = 0;
+               return 0;
+       default:
+               data->oversampling_ratio = -1;
+               return -EINVAL;
+       }
+}
+
+static int bma400_set_accel_oversampling_ratio(struct bma400_data *data,
+                                              int val)
+{
+       unsigned int acc_config;
+       int ret;
+
+       if (val & ~BMA400_TWO_BITS_MASK)
+               return -EINVAL;
+
+       /*
+        * The oversampling ratio is stored in a different register
+        * based on the power-mode.
+        */
+       switch (data->power_mode) {
+       case POWER_MODE_LOW:
+               ret = regmap_read(data->regmap, BMA400_ACC_CONFIG0_REG,
+                                 &acc_config);
+               if (ret)
+                       return ret;
+
+               ret = regmap_write(data->regmap, BMA400_ACC_CONFIG0_REG,
+                                  (acc_config & ~BMA400_LP_OSR_MASK) |
+                                  (val << BMA400_LP_OSR_SHIFT));
+               if (ret) {
+                       dev_err(data->dev, "Failed to write out OSR\n");
+                       return ret;
+               }
+
+               data->oversampling_ratio = val;
+               return 0;
+       case POWER_MODE_NORMAL:
+               ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG,
+                                 &acc_config);
+               if (ret)
+                       return ret;
+
+               ret = regmap_write(data->regmap, BMA400_ACC_CONFIG1_REG,
+                                  (acc_config & ~BMA400_NP_OSR_MASK) |
+                                  (val << BMA400_NP_OSR_SHIFT));
+               if (ret) {
+                       dev_err(data->dev, "Failed to write out OSR\n");
+                       return ret;
+               }
+
+               data->oversampling_ratio = val;
+               return 0;
+       default:
+               return -EINVAL;
+       }
+       return ret;
+}
+

drivers/iio/accel/bma400_core.c line 441

Quoted 10 lines
drivers/iio/accel/bma400_core.c new file +10 -0
+int bma400_accel_scale_to_raw(struct bma400_data *data, unsigned int val)
+{
+       int raw;
+
+       if (val == 0)
+               return -EINVAL;
+
+       raw = __ffs(val);
+
+       if (val >> raw != BMA400_SCALE_MIN)

Ditto.
Luckily it's 38357.

Quoted 448 lines
drivers/iio/accel/bma400_core.c new file +379 -0
+               return -EINVAL;
+
+       return raw;
+}
+
+static int bma400_get_accel_scale(struct bma400_data *data)
+{
+       unsigned int raw_scale;
+       unsigned int val;
+       int ret;
+
+       ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val);
+       if (ret)
+               return ret;
+
+       raw_scale = (val & BMA400_ACC_SCALE_MASK) >> BMA400_SCALE_SHIFT;
+       if (raw_scale > BMA400_TWO_BITS_MASK)
+               return -EINVAL;
+
+       data->scale = BMA400_SCALE_MIN << raw_scale;
+
+       return 0;
+}
+
+static int bma400_set_accel_scale(struct bma400_data *data, unsigned int val)
+{
+       unsigned int acc_config;
+       int raw;
+       int ret;
+
+       ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &acc_config);
+       if (ret)
+               return ret;
+
+       raw = bma400_accel_scale_to_raw(data, val);
+       if (raw < 0)
+               return raw;
+
+       ret = regmap_write(data->regmap, BMA400_ACC_CONFIG1_REG,
+                          (acc_config & ~BMA400_ACC_SCALE_MASK) |
+                          (raw << BMA400_SCALE_SHIFT));
+       if (ret)
+               return ret;
+
+       data->scale = val;
+       return 0;
+}
+
+static int bma400_get_power_mode(struct bma400_data *data)
+{
+       unsigned int val;
+       int ret;
+
+       ret = regmap_read(data->regmap, BMA400_STATUS_REG, &val);
+       if (ret) {
+               dev_err(data->dev, "Failed to read status register\n");
+               return ret;
+       }
+
+       data->power_mode = (val >> 1) & BMA400_TWO_BITS_MASK;
+       return 0;
+}
+
+static int bma400_set_power_mode(struct bma400_data *data,
+                                enum bma400_power_mode mode)
+{
+       unsigned int val;
+       int ret;
+
+       ret = regmap_read(data->regmap, BMA400_ACC_CONFIG0_REG, &val);
+       if (ret)
+               return ret;
+
+       if (data->power_mode == mode)
+               return 0;
+
+       if (mode == POWER_MODE_INVALID)
+               return -EINVAL;
+
+       /* Preserve the low-power oversample ratio etc */
+       ret = regmap_write(data->regmap, BMA400_ACC_CONFIG0_REG,
+                          mode | (val & ~BMA400_TWO_BITS_MASK));
+       if (ret) {
+               dev_err(data->dev, "Failed to write to power-mode\n");
+               return ret;
+       }
+
+       data->power_mode = mode;
+
+       /*
+        * Update our cached osr and odr based on the new
+        * power-mode.
+        */
+       bma400_get_accel_output_data_rate(data);
+       bma400_get_accel_oversampling_ratio(data);
+       return 0;
+}
+
+static void bma400_init_tables(void)
+{
+       int raw;
+       int i;
+
+       for (i = 0; i + 1 < ARRAY_SIZE(bma400_sample_freqs); i += 2) {
+               raw = (i / 2) + 5;
+               bma400_output_data_rate_from_raw(raw, &bma400_sample_freqs[i],
+                                                &bma400_sample_freqs[i + 1]);
+       }
+
+       for (i = 0; i + 1 < ARRAY_SIZE(bma400_scales); i += 2) {
+               raw = i / 2;
+               bma400_scales[i] = 0;
+               bma400_scales[i + 1] = BMA400_SCALE_MIN << raw;
+       }
+}
+
+static int bma400_init(struct bma400_data *data)
+{
+       unsigned int val;
+       int ret;
+
+       /* Try to read chip_id register. It must return 0x90. */
+       ret = regmap_read(data->regmap, BMA400_CHIP_ID_REG, &val);
+       if (ret) {
+               dev_err(data->dev, "Failed to read chip id register\n");
+               goto out;
+       }
+
+       if (val != BMA400_ID_REG_VAL) {
+               dev_err(data->dev, "Chip ID mismatch\n");
+               ret = -ENODEV;
+               goto out;
+       }
+
+       ret = bma400_get_power_mode(data);
+       if (ret) {
+               dev_err(data->dev, "Failed to get the initial power-mode\n");
+               goto out;
+       }
+
+       if (data->power_mode != POWER_MODE_NORMAL) {
+               ret = bma400_set_power_mode(data, POWER_MODE_NORMAL);
+               if (ret) {
+                       dev_err(data->dev, "Failed to wake up the device\n");
+                       goto out;
+               }
+               /*
+                * TODO: The datasheet waits 1500us here in the example, but
+                * lists 2/ODR as the wakeup time.
+                */
+               usleep_range(1500, 2000);
+       }
+
+       bma400_init_tables();
+
+       ret = bma400_get_accel_output_data_rate(data);
+       if (ret)
+               goto out;
+
+       ret = bma400_get_accel_oversampling_ratio(data);
+       if (ret)
+               goto out;
+
+       ret = bma400_get_accel_scale(data);
+       if (ret)
+               goto out;
+
+       /*
+        * Once the interrupt engine is supported we might use the
+        * data_src_reg, but for now ensure this is set to the
+        * variable ODR filter selectable by the sample frequency
+        * channel.
+        */
+       return regmap_write(data->regmap, BMA400_ACC_CONFIG2_REG, 0x00);
+
+out:
+       return ret;
+}
+
+static int bma400_read_raw(struct iio_dev *indio_dev,
+                          struct iio_chan_spec const *chan, int *val,
+                          int *val2, long mask)
+{
+       struct bma400_data *data = iio_priv(indio_dev);
+       int ret;
+
+       switch (mask) {
+       case IIO_CHAN_INFO_PROCESSED:
+               mutex_lock(&data->mutex);
+               ret = bma400_get_temp_reg(data, val, val2);
+               mutex_unlock(&data->mutex);
+               return ret;
+       case IIO_CHAN_INFO_RAW:
+               mutex_lock(&data->mutex);
+               ret = bma400_get_accel_reg(data, chan, val);
+               mutex_unlock(&data->mutex);
+               return ret;
+       case IIO_CHAN_INFO_SAMP_FREQ:
+               switch (chan->type) {
+               case IIO_ACCEL:
+                       if (data->sample_freq.hz < 0)
+                               return -EINVAL;
+
+                       *val = data->sample_freq.hz;
+                       *val2 = data->sample_freq.uhz;
+                       return IIO_VAL_INT_PLUS_MICRO;
+               case IIO_TEMP:
+                       /*
+                        * Runs at a fixed sampling frequency. See Section 4.4
+                        * of the datasheet.
+                        */
+                       *val = 6;
+                       *val2 = 250000;
+                       return IIO_VAL_INT_PLUS_MICRO;
+               default:
+                       return -EINVAL;
+               }
+       case IIO_CHAN_INFO_SCALE:
+               *val = 0;
+               *val2 = data->scale;
+               return IIO_VAL_INT_PLUS_MICRO;
+       case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+               /*
+                * TODO: We could avoid this logic and returning -EINVAL here if
+                * we set both the low-power and normal mode OSR registers when
+                * we configure the device.
+                */
+               if (data->oversampling_ratio < 0)
+                       return -EINVAL;
+
+               *val = data->oversampling_ratio;
+               return IIO_VAL_INT;
+       default:
+               return -EINVAL;
+       }
+}
+
+static int bma400_read_avail(struct iio_dev *indio_dev,
+                            struct iio_chan_spec const *chan,
+                            const int **vals, int *type, int *length,
+                            long mask)
+{
+       switch (mask) {
+       case IIO_CHAN_INFO_SCALE:
+               *type = IIO_VAL_INT_PLUS_MICRO;
+               *vals = bma400_scales;
+               *length = ARRAY_SIZE(bma400_scales);
+               return IIO_AVAIL_LIST;
+       case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+               *type = IIO_VAL_INT;
+               *vals = bma400_osr_range;
+               *length = ARRAY_SIZE(bma400_osr_range);
+               return IIO_AVAIL_RANGE;
+       case IIO_CHAN_INFO_SAMP_FREQ:
+               *type = IIO_VAL_INT_PLUS_MICRO;
+               *vals = bma400_sample_freqs;
+               *length = ARRAY_SIZE(bma400_sample_freqs);
+               return IIO_AVAIL_LIST;
+       default:
+               return -EINVAL;
+       }
+}
+
+static int bma400_write_raw(struct iio_dev *indio_dev,
+                           struct iio_chan_spec const *chan, int val, int val2,
+                           long mask)
+{
+       struct bma400_data *data = iio_priv(indio_dev);
+       int ret;
+
+       switch (mask) {
+       case IIO_CHAN_INFO_SAMP_FREQ:
+               /*
+                * The sample frequency is readonly for the temperature
+                * register and a fixed value in low-power mode.
+                */
+               if (chan->type != IIO_ACCEL)
+                       return -EINVAL;
+
+               mutex_lock(&data->mutex);
+               ret = bma400_set_accel_output_data_rate(data, val, val2);
+               mutex_unlock(&data->mutex);
+               return ret;
+       case IIO_CHAN_INFO_SCALE:
+               if (val != 0 || val2 > BMA400_SCALE_MAX)
+                       return -EINVAL;
+
+               mutex_lock(&data->mutex);
+               ret = bma400_set_accel_scale(data, val2);
+               mutex_unlock(&data->mutex);
+               return ret;
+       case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+               mutex_lock(&data->mutex);
+               ret = bma400_set_accel_oversampling_ratio(data, val);
+               mutex_unlock(&data->mutex);
+               return ret;
+       default:
+               return -EINVAL;
+       }
+}
+
+static int bma400_write_raw_get_fmt(struct iio_dev *indio_dev,
+                                   struct iio_chan_spec const *chan,
+                                   long mask)
+{
+       switch (mask) {
+       case IIO_CHAN_INFO_SAMP_FREQ:
+               return IIO_VAL_INT_PLUS_MICRO;
+       case IIO_CHAN_INFO_SCALE:
+               return IIO_VAL_INT_PLUS_MICRO;
+       case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+               return IIO_VAL_INT;
+       default:
+               return -EINVAL;
+       }
+}
+
+static const struct iio_info bma400_info = {
+       .read_raw          = bma400_read_raw,
+       .read_avail        = bma400_read_avail,
+       .write_raw         = bma400_write_raw,
+       .write_raw_get_fmt = bma400_write_raw_get_fmt,
+};
+
+int bma400_probe(struct device *dev, struct regmap *regmap, const char *name)
+{
+       struct iio_dev *indio_dev;
+       struct bma400_data *data;
+       int ret;
+
+       indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+       if (!indio_dev)
+               return -ENOMEM;
+
+       data = iio_priv(indio_dev);
+       data->regmap = regmap;
+       data->dev = dev;
+
+       ret = bma400_init(data);
+       if (ret)
+               return ret;
+
+       ret = iio_read_mount_matrix(dev, "mount-matrix", &data->orientation);
+       if (ret)
+               return ret;
+
+       mutex_init(&data->mutex);
+       indio_dev->dev.parent = dev;
+       indio_dev->name = name;
+       indio_dev->info = &bma400_info;
+       indio_dev->channels = bma400_channels;
+       indio_dev->num_channels = ARRAY_SIZE(bma400_channels);
+       indio_dev->modes = INDIO_DIRECT_MODE;
+
+       dev_set_drvdata(dev, indio_dev);
+
+       return iio_device_register(indio_dev);
+}
+EXPORT_SYMBOL(bma400_probe);
+
+int bma400_remove(struct device *dev)
+{
+       struct iio_dev *indio_dev = dev_get_drvdata(dev);
+       struct bma400_data *data = iio_priv(indio_dev);
+       int ret;
+
+       mutex_lock(&data->mutex);
+       ret = bma400_set_power_mode(data, POWER_MODE_SLEEP);
+       mutex_unlock(&data->mutex);
+
+       iio_device_unregister(indio_dev);
+
+       return ret;
+}
+EXPORT_SYMBOL(bma400_remove);
+
+MODULE_AUTHOR("Dan Robertson <[email protected]>");
+MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor core");
+MODULE_LICENSE("GPL");
drivers/iio/accel/bma400_i2c.c new file +61 -0
new file mode 100644
index 000000000000..9dcb7cc9996e
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * I2C IIO driver for Bosch BMA400 triaxial acceleration sensor.
+ *
+ * Copyright 2019 Dan Robertson <[email protected]>
+ *
+ * I2C address is either 0x14 or 0x15 depending on SDO
+ */
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "bma400.h"
+
+static int bma400_i2c_probe(struct i2c_client *client,
+                           const struct i2c_device_id *id)
+{
+       struct regmap *regmap;
+
+       regmap = devm_regmap_init_i2c(client, &bma400_regmap_config);
+       if (IS_ERR(regmap)) {
+               dev_err(&client->dev, "failed to create regmap\n");
+               return PTR_ERR(regmap);
+       }
+
+       return bma400_probe(&client->dev, regmap, id->name);
+}
+
+static int bma400_i2c_remove(struct i2c_client *client)
+{
+       return bma400_remove(&client->dev);
+}
+
+static const struct i2c_device_id bma400_i2c_ids[] = {
+       { "bma400", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, bma400_i2c_ids);
+
+static const struct of_device_id bma400_of_i2c_match[] = {
+       { .compatible = "bosch,bma400" },
+       { }
+};
+MODULE_DEVICE_TABLE(of, bma400_of_i2c_match);
+
+static struct i2c_driver bma400_i2c_driver = {
+       .driver = {
+               .name = "bma400",
+               .of_match_table = bma400_of_i2c_match,
+       },
+       .probe    = bma400_i2c_probe,
+       .remove   = bma400_i2c_remove,
+       .id_table = bma400_i2c_ids,
+};
+
+module_i2c_driver(bma400_i2c_driver);
+
+MODULE_AUTHOR("Dan Robertson <[email protected]>");
+MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor (I2C)");
+MODULE_LICENSE("GPL");
Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer
#10 lore raw

Re: [PATCH v8 2/3] iio: (bma400) add driver for the BMA400

Quoted 9 lines · On Fri, 20 Dec 2019 18:43:24 +0200 Andy Shevchenko <[email protected]>…
Quoted 5 lines · Dan Robertson

Add a IIO driver for the Bosch BMA400 3-axes ultra-low power accelerometer. The driver supports reading from the acceleration and temperature registers. The driver also supports reading and configuring the output data rate, oversampling ratio, and scale.

One comment below.

Good points below. I've added comments where you suggested.

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.

Nice driver. Thanks!

Jonathan

Quoted 1,082 lines
Quoted 480 lines
---
 MAINTAINERS                     |   7 +
 drivers/iio/accel/Kconfig       |  16 +
 drivers/iio/accel/Makefile      |   2 +
 drivers/iio/accel/bma400.h      |  95 ++++
 drivers/iio/accel/bma400_core.c | 820 ++++++++++++++++++++++++++++++++
 drivers/iio/accel/bma400_i2c.c  |  61 +++
 6 files changed, 1001 insertions(+)
 create mode 100644 drivers/iio/accel/bma400.h
 create mode 100644 drivers/iio/accel/bma400_core.c
 create mode 100644 drivers/iio/accel/bma400_i2c.c
MAINTAINERS +7 -0
index ec020dc504ca..a5f2cb0de34d 100644
@@ -3047,6 +3047,13 @@ S:       Supported
 F:     drivers/net/bonding/
 F:     include/uapi/linux/if_bonding.h
 
+BOSCH SENSORTEC BMA400 ACCELEROMETER IIO DRIVER
+M:     Dan Robertson <[email protected]>
+L:     [email protected]
+S:     Maintained
+F:     drivers/iio/accel/bma400*
+F:     Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
+
 BPF (Safe dynamic programs and tools)
 M:     Alexei Starovoitov <[email protected]>
 M:     Daniel Borkmann <[email protected]>
drivers/iio/accel/Kconfig +16 -0
index d4ef35aeb579..670e60568033 100644
@@ -112,6 +112,22 @@ config BMA220
          To compile this driver as a module, choose M here: the
          module will be called bma220_spi.
 
+config BMA400
+       tristate "Bosch BMA400 3-Axis Accelerometer Driver"
+       select REGMAP
+       select BMA400_I2C if I2C
+       help
+         Say Y here if you want to build a driver for the Bosch BMA400
+         triaxial acceleration sensor.
+
+         To compile this driver as a module, choose M here: the
+         module will be called bma400_core and you will also get
+         bma400_i2c if I2C is enabled.
+
+config BMA400_I2C
+       tristate
+       depends on BMA400
+
 config BMC150_ACCEL
        tristate "Bosch BMC150 Accelerometer Driver"
        select IIO_BUFFER
drivers/iio/accel/Makefile +2 -0
index 56bd0215e0d4..3a051cf37f40 100644
@@ -14,6 +14,8 @@ obj-$(CONFIG_ADXL372_I2C) += adxl372_i2c.o
 obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o
 obj-$(CONFIG_BMA180) += bma180.o
 obj-$(CONFIG_BMA220) += bma220_spi.o
+obj-$(CONFIG_BMA400) += bma400_core.o
+obj-$(CONFIG_BMA400_I2C) += bma400_i2c.o
 obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
 obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
 obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
drivers/iio/accel/bma400.h new file +95 -0
new file mode 100644
index 000000000000..15c0e307d2c4
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Register constants and other forward declarations needed by the bma400
+ * sources.
+ *
+ * Copyright 2019 Dan Robertson <[email protected]>
+ */
+
+#ifndef _BMA400_H_
+#define _BMA400_H_
+
+#include <linux/bits.h>
+#include <linux/regmap.h>
+
+/*
+ * Read-Only Registers
+ */
+
+/* Status and ID registers */
+#define BMA400_CHIP_ID_REG          0x00
+#define BMA400_ERR_REG              0x02
+#define BMA400_STATUS_REG           0x03
+
+/* Acceleration registers */
+#define BMA400_X_AXIS_LSB_REG       0x04
+#define BMA400_X_AXIS_MSB_REG       0x05
+#define BMA400_Y_AXIS_LSB_REG       0x06
+#define BMA400_Y_AXIS_MSB_REG       0x07
+#define BMA400_Z_AXIS_LSB_REG       0x08
+#define BMA400_Z_AXIS_MSB_REG       0x09
+
+/* Sensor time registers */
+#define BMA400_SENSOR_TIME0         0x0a
+#define BMA400_SENSOR_TIME1         0x0b
+#define BMA400_SENSOR_TIME2         0x0c
+
+/* Event and interrupt registers */
+#define BMA400_EVENT_REG            0x0d
+#define BMA400_INT_STAT0_REG        0x0e
+#define BMA400_INT_STAT1_REG        0x0f
+#define BMA400_INT_STAT2_REG        0x10
+
+/* Temperature register */
+#define BMA400_TEMP_DATA_REG        0x11
+
+/* FIFO length and data registers */
+#define BMA400_FIFO_LENGTH0_REG     0x12
+#define BMA400_FIFO_LENGTH1_REG     0x13
+#define BMA400_FIFO_DATA_REG        0x14
+
+/* Step count registers */
+#define BMA400_STEP_CNT0_REG        0x15
+#define BMA400_STEP_CNT1_REG        0x16
+#define BMA400_STEP_CNT3_REG        0x17
+#define BMA400_STEP_STAT_REG        0x18
+
+/*
+ * Read-write configuration registers
+ */
+#define BMA400_ACC_CONFIG0_REG      0x19
+#define BMA400_ACC_CONFIG1_REG      0x1a
+#define BMA400_ACC_CONFIG2_REG      0x1b
+#define BMA400_CMD_REG              0x7e
+
+/* Chip ID of BMA 400 devices found in the chip ID register. */
+#define BMA400_ID_REG_VAL           0x90
+
+#define BMA400_LP_OSR_SHIFT         5
+#define BMA400_NP_OSR_SHIFT         4
+#define BMA400_SCALE_SHIFT          6
+
+#define BMA400_TWO_BITS_MASK        GENMASK(1, 0)
+#define BMA400_LP_OSR_MASK          GENMASK(6, 5)
+#define BMA400_NP_OSR_MASK          GENMASK(5, 4)
+#define BMA400_ACC_ODR_MASK         GENMASK(3, 0)
+#define BMA400_ACC_SCALE_MASK       GENMASK(7, 6)
+
+#define BMA400_ACC_ODR_MIN_RAW      0x05
+#define BMA400_ACC_ODR_LP_RAW       0x06
+#define BMA400_ACC_ODR_MAX_RAW      0x0b
+
+#define BMA400_ACC_ODR_MAX_HZ       800
+#define BMA400_ACC_ODR_MIN_WHOLE_HZ 25
+#define BMA400_ACC_ODR_MIN_HZ       12
+
+#define BMA400_SCALE_MIN            38357
+#define BMA400_SCALE_MAX            306864
+
+extern const struct regmap_config bma400_regmap_config;
+
+int bma400_probe(struct device *dev, struct regmap *regmap, const char *name);
+
+int bma400_remove(struct device *dev);
+
+#endif
drivers/iio/accel/bma400_core.c new file +300 -0
new file mode 100644
index 000000000000..e7ba01e79d2c
@@ -0,0 +1,820 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Core IIO driver for Bosch BMA400 triaxial acceleration sensor.
+ *
+ * Copyright 2019 Dan Robertson <[email protected]>
+ *
+ * TODO:
+ *  - Support for power management
+ *  - Support events and interrupts
+ *  - Create channel for step count
+ *  - Create channel for sensor time
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+
+#include "bma400.h"
+
+/*
+ * The G-range selection may be one of 2g, 4g, 8, or 16g. The scale may
+ * be selected with the acc_range bits of the ACC_CONFIG1 register.
+ * NB: This buffer is populated in the device init.
+ */
+static int bma400_scales[8];
+
+/*
+ * See the ACC_CONFIG1 section of the datasheet.
+ * NB: This buffer is populated in the device init.
+ */
+static int bma400_sample_freqs[14];
+
+static const int bma400_osr_range[] = { 0, 1, 3 };
+
+/* See the ACC_CONFIG0 section of the datasheet */
+enum bma400_power_mode {
+       POWER_MODE_SLEEP   = 0x00,
+       POWER_MODE_LOW     = 0x01,
+       POWER_MODE_NORMAL  = 0x02,
+       POWER_MODE_INVALID = 0x03,
+};
+
+struct bma400_sample_freq {
+       int hz;
+       int uhz;
+};
+
+struct bma400_data {
+       struct device *dev;
+       struct regmap *regmap;
+       struct mutex mutex; /* data register lock */
+       struct iio_mount_matrix orientation;
+       enum bma400_power_mode power_mode;
+       struct bma400_sample_freq sample_freq;
+       int oversampling_ratio;
+       int scale;
+};
+
+static bool bma400_is_writable_reg(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case BMA400_CHIP_ID_REG:
+       case BMA400_ERR_REG:
+       case BMA400_STATUS_REG:
+       case BMA400_X_AXIS_LSB_REG:
+       case BMA400_X_AXIS_MSB_REG:
+       case BMA400_Y_AXIS_LSB_REG:
+       case BMA400_Y_AXIS_MSB_REG:
+       case BMA400_Z_AXIS_LSB_REG:
+       case BMA400_Z_AXIS_MSB_REG:
+       case BMA400_SENSOR_TIME0:
+       case BMA400_SENSOR_TIME1:
+       case BMA400_SENSOR_TIME2:
+       case BMA400_EVENT_REG:
+       case BMA400_INT_STAT0_REG:
+       case BMA400_INT_STAT1_REG:
+       case BMA400_INT_STAT2_REG:
+       case BMA400_TEMP_DATA_REG:
+       case BMA400_FIFO_LENGTH0_REG:
+       case BMA400_FIFO_LENGTH1_REG:
+       case BMA400_FIFO_DATA_REG:
+       case BMA400_STEP_CNT0_REG:
+       case BMA400_STEP_CNT1_REG:
+       case BMA400_STEP_CNT3_REG:
+       case BMA400_STEP_STAT_REG:
+               return false;
+       default:
+               return true;
+       }
+}
+
+static bool bma400_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case BMA400_ERR_REG:
+       case BMA400_STATUS_REG:
+       case BMA400_X_AXIS_LSB_REG:
+       case BMA400_X_AXIS_MSB_REG:
+       case BMA400_Y_AXIS_LSB_REG:
+       case BMA400_Y_AXIS_MSB_REG:
+       case BMA400_Z_AXIS_LSB_REG:
+       case BMA400_Z_AXIS_MSB_REG:
+       case BMA400_SENSOR_TIME0:
+       case BMA400_SENSOR_TIME1:
+       case BMA400_SENSOR_TIME2:
+       case BMA400_EVENT_REG:
+       case BMA400_INT_STAT0_REG:
+       case BMA400_INT_STAT1_REG:
+       case BMA400_INT_STAT2_REG:
+       case BMA400_TEMP_DATA_REG:
+       case BMA400_FIFO_LENGTH0_REG:
+       case BMA400_FIFO_LENGTH1_REG:
+       case BMA400_FIFO_DATA_REG:
+       case BMA400_STEP_CNT0_REG:
+       case BMA400_STEP_CNT1_REG:
+       case BMA400_STEP_CNT3_REG:
+       case BMA400_STEP_STAT_REG:
+               return true;
+       default:
+               return false;
+       }
+}
+
+const struct regmap_config bma400_regmap_config = {
+       .reg_bits = 8,
+       .val_bits = 8,
+       .max_register = BMA400_CMD_REG,
+       .cache_type = REGCACHE_RBTREE,
+       .writeable_reg = bma400_is_writable_reg,
+       .volatile_reg = bma400_is_volatile_reg,
+};
+EXPORT_SYMBOL(bma400_regmap_config);
+
+static const struct iio_mount_matrix *
+bma400_accel_get_mount_matrix(const struct iio_dev *indio_dev,
+                             const struct iio_chan_spec *chan)
+{
+       struct bma400_data *data = iio_priv(indio_dev);
+
+       return &data->orientation;
+}
+
+static const struct iio_chan_spec_ext_info bma400_ext_info[] = {
+       IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, bma400_accel_get_mount_matrix),
+       { }
+};
+
+#define BMA400_ACC_CHANNEL(_axis) { \
+       .type = IIO_ACCEL, \
+       .modified = 1, \
+       .channel2 = IIO_MOD_##_axis, \
+       .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+       .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+               BIT(IIO_CHAN_INFO_SCALE) | \
+               BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+       .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+               BIT(IIO_CHAN_INFO_SCALE) | \
+               BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+       .ext_info = bma400_ext_info, \
+}
+
+static const struct iio_chan_spec bma400_channels[] = {
+       BMA400_ACC_CHANNEL(X),
+       BMA400_ACC_CHANNEL(Y),
+       BMA400_ACC_CHANNEL(Z),
+       {
+               .type = IIO_TEMP,
+               .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+               .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+       },
+};
+
+static int bma400_get_temp_reg(struct bma400_data *data, int *val, int *val2)
+{
+       unsigned int raw_temp;
+       int host_temp;
+       int ret;
+
+       if (data->power_mode == POWER_MODE_SLEEP)
+               return -EBUSY;
+
+       ret = regmap_read(data->regmap, BMA400_TEMP_DATA_REG, &raw_temp);
+       if (ret)
+               return ret;
+
+       host_temp = sign_extend32(raw_temp, 7);
+       /*
+        * The formula for the TEMP_DATA register in the datasheet
+        * is: x * 0.5 + 23
+        */
+       *val = (host_temp >> 1) + 23;
+       *val2 = (host_temp & 0x1) * 500000;
+       return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int bma400_get_accel_reg(struct bma400_data *data,
+                               const struct iio_chan_spec *chan,
+                               int *val)
+{
+       __le16 raw_accel;
+       int lsb_reg;
+       int ret;
+
+       if (data->power_mode == POWER_MODE_SLEEP)
+               return -EBUSY;
+
+       switch (chan->channel2) {
+       case IIO_MOD_X:
+               lsb_reg = BMA400_X_AXIS_LSB_REG;
+               break;
+       case IIO_MOD_Y:
+               lsb_reg = BMA400_Y_AXIS_LSB_REG;
+               break;
+       case IIO_MOD_Z:
+               lsb_reg = BMA400_Z_AXIS_LSB_REG;
+               break;
+       default:
+               dev_err(data->dev, "invalid axis channel modifier\n");
+               return -EINVAL;
+       }
+
+       /* bulk read two registers, with the base being the LSB register */
+       ret = regmap_bulk_read(data->regmap, lsb_reg, &raw_accel,
+                              sizeof(raw_accel));
+       if (ret)
+               return ret;
+
+       *val = sign_extend32(le16_to_cpu(raw_accel), 11);
+       return IIO_VAL_INT;
+}
+
+static void bma400_output_data_rate_from_raw(int raw, unsigned int *val,
+                                            unsigned int *val2)
+{
+       *val = BMA400_ACC_ODR_MAX_HZ >> (BMA400_ACC_ODR_MAX_RAW - raw);
+       if (raw > BMA400_ACC_ODR_MIN_RAW)
+               *val2 = 0;
+       else
+               *val2 = 500000;
+}
+
+static int bma400_get_accel_output_data_rate(struct bma400_data *data)
+{
+       unsigned int val;
+       unsigned int odr;
+       int ret;
+
+       switch (data->power_mode) {
+       case POWER_MODE_LOW:
+               /*
+                * Runs at a fixed rate in low-power mode. See section 4.3
+                * in the datasheet.
+                */
+               bma400_output_data_rate_from_raw(BMA400_ACC_ODR_LP_RAW,
+                                                &data->sample_freq.hz,
+                                                &data->sample_freq.uhz);
+               return 0;
+       case POWER_MODE_NORMAL:
+               /*
+                * In normal mode the ODR can be found in the ACC_CONFIG1
+                * register.
+                */
+               ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val);
+               if (ret)
+                       goto error;
+
+               odr = val & BMA400_ACC_ODR_MASK;
+               if (odr < BMA400_ACC_ODR_MIN_RAW ||
+                   odr > BMA400_ACC_ODR_MAX_RAW) {
+                       ret = -EINVAL;
+                       goto error;
+               }
+
+               bma400_output_data_rate_from_raw(odr, &data->sample_freq.hz,
+                                                &data->sample_freq.uhz);
+               return 0;
+       case POWER_MODE_SLEEP:
+               data->sample_freq.hz = 0;
+               data->sample_freq.uhz = 0;
+               return 0;
+       default:
+               ret = 0;
+               goto error;
+       }
+error:
+       data->sample_freq.hz = -1;
+       data->sample_freq.uhz = -1;
+       return ret;
+}
+
+static int bma400_set_accel_output_data_rate(struct bma400_data *data,
+                                            int hz, int uhz)
+{
+       unsigned int idx;
+       unsigned int odr;

drivers/iio/accel/bma400_core.c line 310

Quoted 10 lines
drivers/iio/accel/bma400_core.c new file +10 -0
+       unsigned int val;
+       int ret;
+
+       if (hz >= BMA400_ACC_ODR_MIN_WHOLE_HZ) {
+               if (uhz || hz > BMA400_ACC_ODR_MAX_HZ)
+                       return -EINVAL;
+
+               idx = __ffs(hz);
+
+               if (hz >> idx != BMA400_ACC_ODR_MIN_WHOLE_HZ)  

Yeah, as I said it works if and only if the MIN_WHOLE_HZ % 2 == 1, i.e. odd number.
Luckily the constant is 25.

Perhaps it needs a comment somewhere.

Quoted 121 lines
drivers/iio/accel/bma400_core.c new file +121 -0
+                       return -EINVAL;
+
+               idx += BMA400_ACC_ODR_MIN_RAW + 1;
+       } else if (hz == BMA400_ACC_ODR_MIN_HZ && uhz == 500000) {
+               idx = BMA400_ACC_ODR_MIN_RAW;
+       } else {
+               return -EINVAL;
+       }
+
+       ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val);
+       if (ret)
+               return ret;
+
+       /* preserve the range and normal mode osr */
+       odr = (~BMA400_ACC_ODR_MASK & val) | idx;
+
+       ret = regmap_write(data->regmap, BMA400_ACC_CONFIG1_REG, odr);
+       if (ret)
+               return ret;
+
+       bma400_output_data_rate_from_raw(idx, &data->sample_freq.hz,
+                                        &data->sample_freq.uhz);
+       return 0;
+}
+
+static int bma400_get_accel_oversampling_ratio(struct bma400_data *data)
+{
+       unsigned int val;
+       unsigned int osr;
+       int ret;
+
+       /*
+        * The oversampling ratio is stored in a different register
+        * based on the power-mode. In normal mode the OSR is stored
+        * in ACC_CONFIG1. In low-power mode it is stored in
+        * ACC_CONFIG0.
+        */
+       switch (data->power_mode) {
+       case POWER_MODE_LOW:
+               ret = regmap_read(data->regmap, BMA400_ACC_CONFIG0_REG, &val);
+               if (ret) {
+                       data->oversampling_ratio = -1;
+                       return ret;
+               }
+
+               osr = (val & BMA400_LP_OSR_MASK) >> BMA400_LP_OSR_SHIFT;
+
+               data->oversampling_ratio = osr;
+               return 0;
+       case POWER_MODE_NORMAL:
+               ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val);
+               if (ret) {
+                       data->oversampling_ratio = -1;
+                       return ret;
+               }
+
+               osr = (val & BMA400_NP_OSR_MASK) >> BMA400_NP_OSR_SHIFT;
+
+               data->oversampling_ratio = osr;
+               return 0;
+       case POWER_MODE_SLEEP:
+               data->oversampling_ratio = 0;
+               return 0;
+       default:
+               data->oversampling_ratio = -1;
+               return -EINVAL;
+       }
+}
+
+static int bma400_set_accel_oversampling_ratio(struct bma400_data *data,
+                                              int val)
+{
+       unsigned int acc_config;
+       int ret;
+
+       if (val & ~BMA400_TWO_BITS_MASK)
+               return -EINVAL;
+
+       /*
+        * The oversampling ratio is stored in a different register
+        * based on the power-mode.
+        */
+       switch (data->power_mode) {
+       case POWER_MODE_LOW:
+               ret = regmap_read(data->regmap, BMA400_ACC_CONFIG0_REG,
+                                 &acc_config);
+               if (ret)
+                       return ret;
+
+               ret = regmap_write(data->regmap, BMA400_ACC_CONFIG0_REG,
+                                  (acc_config & ~BMA400_LP_OSR_MASK) |
+                                  (val << BMA400_LP_OSR_SHIFT));
+               if (ret) {
+                       dev_err(data->dev, "Failed to write out OSR\n");
+                       return ret;
+               }
+
+               data->oversampling_ratio = val;
+               return 0;
+       case POWER_MODE_NORMAL:
+               ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG,
+                                 &acc_config);
+               if (ret)
+                       return ret;
+
+               ret = regmap_write(data->regmap, BMA400_ACC_CONFIG1_REG,
+                                  (acc_config & ~BMA400_NP_OSR_MASK) |
+                                  (val << BMA400_NP_OSR_SHIFT));
+               if (ret) {
+                       dev_err(data->dev, "Failed to write out OSR\n");
+                       return ret;
+               }
+
+               data->oversampling_ratio = val;
+               return 0;
+       default:
+               return -EINVAL;
+       }
+       return ret;
+}
+

drivers/iio/accel/bma400_core.c line 441

Quoted 10 lines
drivers/iio/accel/bma400_core.c new file +10 -0
+int bma400_accel_scale_to_raw(struct bma400_data *data, unsigned int val)
+{
+       int raw;
+
+       if (val == 0)
+               return -EINVAL;
+
+       raw = __ffs(val);
+
+       if (val >> raw != BMA400_SCALE_MIN)  

Ditto.
Luckily it's 38357.

Quoted 448 lines
drivers/iio/accel/bma400_core.c new file +379 -0
+               return -EINVAL;
+
+       return raw;
+}
+
+static int bma400_get_accel_scale(struct bma400_data *data)
+{
+       unsigned int raw_scale;
+       unsigned int val;
+       int ret;
+
+       ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val);
+       if (ret)
+               return ret;
+
+       raw_scale = (val & BMA400_ACC_SCALE_MASK) >> BMA400_SCALE_SHIFT;
+       if (raw_scale > BMA400_TWO_BITS_MASK)
+               return -EINVAL;
+
+       data->scale = BMA400_SCALE_MIN << raw_scale;
+
+       return 0;
+}
+
+static int bma400_set_accel_scale(struct bma400_data *data, unsigned int val)
+{
+       unsigned int acc_config;
+       int raw;
+       int ret;
+
+       ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &acc_config);
+       if (ret)
+               return ret;
+
+       raw = bma400_accel_scale_to_raw(data, val);
+       if (raw < 0)
+               return raw;
+
+       ret = regmap_write(data->regmap, BMA400_ACC_CONFIG1_REG,
+                          (acc_config & ~BMA400_ACC_SCALE_MASK) |
+                          (raw << BMA400_SCALE_SHIFT));
+       if (ret)
+               return ret;
+
+       data->scale = val;
+       return 0;
+}
+
+static int bma400_get_power_mode(struct bma400_data *data)
+{
+       unsigned int val;
+       int ret;
+
+       ret = regmap_read(data->regmap, BMA400_STATUS_REG, &val);
+       if (ret) {
+               dev_err(data->dev, "Failed to read status register\n");
+               return ret;
+       }
+
+       data->power_mode = (val >> 1) & BMA400_TWO_BITS_MASK;
+       return 0;
+}
+
+static int bma400_set_power_mode(struct bma400_data *data,
+                                enum bma400_power_mode mode)
+{
+       unsigned int val;
+       int ret;
+
+       ret = regmap_read(data->regmap, BMA400_ACC_CONFIG0_REG, &val);
+       if (ret)
+               return ret;
+
+       if (data->power_mode == mode)
+               return 0;
+
+       if (mode == POWER_MODE_INVALID)
+               return -EINVAL;
+
+       /* Preserve the low-power oversample ratio etc */
+       ret = regmap_write(data->regmap, BMA400_ACC_CONFIG0_REG,
+                          mode | (val & ~BMA400_TWO_BITS_MASK));
+       if (ret) {
+               dev_err(data->dev, "Failed to write to power-mode\n");
+               return ret;
+       }
+
+       data->power_mode = mode;
+
+       /*
+        * Update our cached osr and odr based on the new
+        * power-mode.
+        */
+       bma400_get_accel_output_data_rate(data);
+       bma400_get_accel_oversampling_ratio(data);
+       return 0;
+}
+
+static void bma400_init_tables(void)
+{
+       int raw;
+       int i;
+
+       for (i = 0; i + 1 < ARRAY_SIZE(bma400_sample_freqs); i += 2) {
+               raw = (i / 2) + 5;
+               bma400_output_data_rate_from_raw(raw, &bma400_sample_freqs[i],
+                                                &bma400_sample_freqs[i + 1]);
+       }
+
+       for (i = 0; i + 1 < ARRAY_SIZE(bma400_scales); i += 2) {
+               raw = i / 2;
+               bma400_scales[i] = 0;
+               bma400_scales[i + 1] = BMA400_SCALE_MIN << raw;
+       }
+}
+
+static int bma400_init(struct bma400_data *data)
+{
+       unsigned int val;
+       int ret;
+
+       /* Try to read chip_id register. It must return 0x90. */
+       ret = regmap_read(data->regmap, BMA400_CHIP_ID_REG, &val);
+       if (ret) {
+               dev_err(data->dev, "Failed to read chip id register\n");
+               goto out;
+       }
+
+       if (val != BMA400_ID_REG_VAL) {
+               dev_err(data->dev, "Chip ID mismatch\n");
+               ret = -ENODEV;
+               goto out;
+       }
+
+       ret = bma400_get_power_mode(data);
+       if (ret) {
+               dev_err(data->dev, "Failed to get the initial power-mode\n");
+               goto out;
+       }
+
+       if (data->power_mode != POWER_MODE_NORMAL) {
+               ret = bma400_set_power_mode(data, POWER_MODE_NORMAL);
+               if (ret) {
+                       dev_err(data->dev, "Failed to wake up the device\n");
+                       goto out;
+               }
+               /*
+                * TODO: The datasheet waits 1500us here in the example, but
+                * lists 2/ODR as the wakeup time.
+                */
+               usleep_range(1500, 2000);
+       }
+
+       bma400_init_tables();
+
+       ret = bma400_get_accel_output_data_rate(data);
+       if (ret)
+               goto out;
+
+       ret = bma400_get_accel_oversampling_ratio(data);
+       if (ret)
+               goto out;
+
+       ret = bma400_get_accel_scale(data);
+       if (ret)
+               goto out;
+
+       /*
+        * Once the interrupt engine is supported we might use the
+        * data_src_reg, but for now ensure this is set to the
+        * variable ODR filter selectable by the sample frequency
+        * channel.
+        */
+       return regmap_write(data->regmap, BMA400_ACC_CONFIG2_REG, 0x00);
+
+out:
+       return ret;
+}
+
+static int bma400_read_raw(struct iio_dev *indio_dev,
+                          struct iio_chan_spec const *chan, int *val,
+                          int *val2, long mask)
+{
+       struct bma400_data *data = iio_priv(indio_dev);
+       int ret;
+
+       switch (mask) {
+       case IIO_CHAN_INFO_PROCESSED:
+               mutex_lock(&data->mutex);
+               ret = bma400_get_temp_reg(data, val, val2);
+               mutex_unlock(&data->mutex);
+               return ret;
+       case IIO_CHAN_INFO_RAW:
+               mutex_lock(&data->mutex);
+               ret = bma400_get_accel_reg(data, chan, val);
+               mutex_unlock(&data->mutex);
+               return ret;
+       case IIO_CHAN_INFO_SAMP_FREQ:
+               switch (chan->type) {
+               case IIO_ACCEL:
+                       if (data->sample_freq.hz < 0)
+                               return -EINVAL;
+
+                       *val = data->sample_freq.hz;
+                       *val2 = data->sample_freq.uhz;
+                       return IIO_VAL_INT_PLUS_MICRO;
+               case IIO_TEMP:
+                       /*
+                        * Runs at a fixed sampling frequency. See Section 4.4
+                        * of the datasheet.
+                        */
+                       *val = 6;
+                       *val2 = 250000;
+                       return IIO_VAL_INT_PLUS_MICRO;
+               default:
+                       return -EINVAL;
+               }
+       case IIO_CHAN_INFO_SCALE:
+               *val = 0;
+               *val2 = data->scale;
+               return IIO_VAL_INT_PLUS_MICRO;
+       case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+               /*
+                * TODO: We could avoid this logic and returning -EINVAL here if
+                * we set both the low-power and normal mode OSR registers when
+                * we configure the device.
+                */
+               if (data->oversampling_ratio < 0)
+                       return -EINVAL;
+
+               *val = data->oversampling_ratio;
+               return IIO_VAL_INT;
+       default:
+               return -EINVAL;
+       }
+}
+
+static int bma400_read_avail(struct iio_dev *indio_dev,
+                            struct iio_chan_spec const *chan,
+                            const int **vals, int *type, int *length,
+                            long mask)
+{
+       switch (mask) {
+       case IIO_CHAN_INFO_SCALE:
+               *type = IIO_VAL_INT_PLUS_MICRO;
+               *vals = bma400_scales;
+               *length = ARRAY_SIZE(bma400_scales);
+               return IIO_AVAIL_LIST;
+       case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+               *type = IIO_VAL_INT;
+               *vals = bma400_osr_range;
+               *length = ARRAY_SIZE(bma400_osr_range);
+               return IIO_AVAIL_RANGE;
+       case IIO_CHAN_INFO_SAMP_FREQ:
+               *type = IIO_VAL_INT_PLUS_MICRO;
+               *vals = bma400_sample_freqs;
+               *length = ARRAY_SIZE(bma400_sample_freqs);
+               return IIO_AVAIL_LIST;
+       default:
+               return -EINVAL;
+       }
+}
+
+static int bma400_write_raw(struct iio_dev *indio_dev,
+                           struct iio_chan_spec const *chan, int val, int val2,
+                           long mask)
+{
+       struct bma400_data *data = iio_priv(indio_dev);
+       int ret;
+
+       switch (mask) {
+       case IIO_CHAN_INFO_SAMP_FREQ:
+               /*
+                * The sample frequency is readonly for the temperature
+                * register and a fixed value in low-power mode.
+                */
+               if (chan->type != IIO_ACCEL)
+                       return -EINVAL;
+
+               mutex_lock(&data->mutex);
+               ret = bma400_set_accel_output_data_rate(data, val, val2);
+               mutex_unlock(&data->mutex);
+               return ret;
+       case IIO_CHAN_INFO_SCALE:
+               if (val != 0 || val2 > BMA400_SCALE_MAX)
+                       return -EINVAL;
+
+               mutex_lock(&data->mutex);
+               ret = bma400_set_accel_scale(data, val2);
+               mutex_unlock(&data->mutex);
+               return ret;
+       case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+               mutex_lock(&data->mutex);
+               ret = bma400_set_accel_oversampling_ratio(data, val);
+               mutex_unlock(&data->mutex);
+               return ret;
+       default:
+               return -EINVAL;
+       }
+}
+
+static int bma400_write_raw_get_fmt(struct iio_dev *indio_dev,
+                                   struct iio_chan_spec const *chan,
+                                   long mask)
+{
+       switch (mask) {
+       case IIO_CHAN_INFO_SAMP_FREQ:
+               return IIO_VAL_INT_PLUS_MICRO;
+       case IIO_CHAN_INFO_SCALE:
+               return IIO_VAL_INT_PLUS_MICRO;
+       case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+               return IIO_VAL_INT;
+       default:
+               return -EINVAL;
+       }
+}
+
+static const struct iio_info bma400_info = {
+       .read_raw          = bma400_read_raw,
+       .read_avail        = bma400_read_avail,
+       .write_raw         = bma400_write_raw,
+       .write_raw_get_fmt = bma400_write_raw_get_fmt,
+};
+
+int bma400_probe(struct device *dev, struct regmap *regmap, const char *name)
+{
+       struct iio_dev *indio_dev;
+       struct bma400_data *data;
+       int ret;
+
+       indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+       if (!indio_dev)
+               return -ENOMEM;
+
+       data = iio_priv(indio_dev);
+       data->regmap = regmap;
+       data->dev = dev;
+
+       ret = bma400_init(data);
+       if (ret)
+               return ret;
+
+       ret = iio_read_mount_matrix(dev, "mount-matrix", &data->orientation);
+       if (ret)
+               return ret;
+
+       mutex_init(&data->mutex);
+       indio_dev->dev.parent = dev;
+       indio_dev->name = name;
+       indio_dev->info = &bma400_info;
+       indio_dev->channels = bma400_channels;
+       indio_dev->num_channels = ARRAY_SIZE(bma400_channels);
+       indio_dev->modes = INDIO_DIRECT_MODE;
+
+       dev_set_drvdata(dev, indio_dev);
+
+       return iio_device_register(indio_dev);
+}
+EXPORT_SYMBOL(bma400_probe);
+
+int bma400_remove(struct device *dev)
+{
+       struct iio_dev *indio_dev = dev_get_drvdata(dev);
+       struct bma400_data *data = iio_priv(indio_dev);
+       int ret;
+
+       mutex_lock(&data->mutex);
+       ret = bma400_set_power_mode(data, POWER_MODE_SLEEP);
+       mutex_unlock(&data->mutex);
+
+       iio_device_unregister(indio_dev);
+
+       return ret;
+}
+EXPORT_SYMBOL(bma400_remove);
+
+MODULE_AUTHOR("Dan Robertson <[email protected]>");
+MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor core");
+MODULE_LICENSE("GPL");
drivers/iio/accel/bma400_i2c.c new file +61 -0
new file mode 100644
index 000000000000..9dcb7cc9996e
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * I2C IIO driver for Bosch BMA400 triaxial acceleration sensor.
+ *
+ * Copyright 2019 Dan Robertson <[email protected]>
+ *
+ * I2C address is either 0x14 or 0x15 depending on SDO
+ */
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "bma400.h"
+
+static int bma400_i2c_probe(struct i2c_client *client,
+                           const struct i2c_device_id *id)
+{
+       struct regmap *regmap;
+
+       regmap = devm_regmap_init_i2c(client, &bma400_regmap_config);
+       if (IS_ERR(regmap)) {
+               dev_err(&client->dev, "failed to create regmap\n");
+               return PTR_ERR(regmap);
+       }
+
+       return bma400_probe(&client->dev, regmap, id->name);
+}
+
+static int bma400_i2c_remove(struct i2c_client *client)
+{
+       return bma400_remove(&client->dev);
+}
+
+static const struct i2c_device_id bma400_i2c_ids[] = {
+       { "bma400", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, bma400_i2c_ids);
+
+static const struct of_device_id bma400_of_i2c_match[] = {
+       { .compatible = "bosch,bma400" },
+       { }
+};
+MODULE_DEVICE_TABLE(of, bma400_of_i2c_match);
+
+static struct i2c_driver bma400_i2c_driver = {
+       .driver = {
+               .name = "bma400",
+               .of_match_table = bma400_of_i2c_match,
+       },
+       .probe    = bma400_i2c_probe,
+       .remove   = bma400_i2c_remove,
+       .id_table = bma400_i2c_ids,
+};
+
+module_i2c_driver(bma400_i2c_driver);
+
+MODULE_AUTHOR("Dan Robertson <[email protected]>");
+MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor (I2C)");
+MODULE_LICENSE("GPL");
author maintainer
#11 lore raw

PATCH v8 3/3 iio: (bma400) basic regulator support

In reply to Dan Robertson

Add support for the VDD and VDDIO regulators using the regulator framework.

---
 drivers/iio/accel/Kconfig       |  1 +
 drivers/iio/accel/bma400.h      |  4 ++++
 drivers/iio/accel/bma400_core.c | 39 ++++++++++++++++++++++++++++-----
 3 files changed, 39 insertions(+), 5 deletions(-)
drivers/iio/accel/Kconfig +1 -0
index 670e60568033..9cfe9c790190 100644
@@ -116,6 +116,7 @@ config BMA400
 	tristate "Bosch BMA400 3-Axis Accelerometer Driver"
 	select REGMAP
 	select BMA400_I2C if I2C
+	select REGULATOR
 	help
 	  Say Y here if you want to build a driver for the Bosch BMA400
 	  triaxial acceleration sensor.
drivers/iio/accel/bma400.h +4 -0
index 15c0e307d2c4..5ad10db9819f 100644
@@ -86,6 +86,10 @@
 #define BMA400_SCALE_MIN            38357
 #define BMA400_SCALE_MAX            306864
 
+#define BMA400_NUM_REGULATORS       2
+#define BMA400_VDD_REGULATOR        0
+#define BMA400_VDDIO_REGULATOR      1
+
 extern const struct regmap_config bma400_regmap_config;
 
 int bma400_probe(struct device *dev, struct regmap *regmap, const char *name);
drivers/iio/accel/bma400_core.c +34 -5
index e7ba01e79d2c..61eb676e46be 100644
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #include "bma400.h"
 
@@ -53,6 +54,7 @@ struct bma400_sample_freq {
 struct bma400_data {
 	struct device *dev;
 	struct regmap *regmap;
+	struct regulator_bulk_data regulators[BMA400_NUM_REGULATORS];
 	struct mutex mutex; /* data register lock */
 	struct iio_mount_matrix orientation;
 	enum bma400_power_mode power_mode;
@@ -573,17 +575,38 @@ static int bma400_init(struct bma400_data *data)
 		goto out;
 	}
 
+	data->regulators[BMA400_VDD_REGULATOR].supply = "vdd";
+	data->regulators[BMA400_VDDIO_REGULATOR].supply = "vddio";
+	ret = devm_regulator_bulk_get(data->dev,
+				      ARRAY_SIZE(data->regulators),
+				      data->regulators);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(data->dev,
+				"Failed to get regulators: %d\n",
+				ret);
+
+		goto out;
+	}
+	ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
+				    data->regulators);
+	if (ret) {
+		dev_err(data->dev, "Failed to enable regulators: %d\n",
+			ret);
+		goto out;
+	}
+
 	ret = bma400_get_power_mode(data);
 	if (ret) {
 		dev_err(data->dev, "Failed to get the initial power-mode\n");
-		goto out;
+		goto err_reg_disable;
 	}
 
 	if (data->power_mode != POWER_MODE_NORMAL) {
 		ret = bma400_set_power_mode(data, POWER_MODE_NORMAL);
 		if (ret) {
 			dev_err(data->dev, "Failed to wake up the device\n");
-			goto out;
+			goto err_reg_disable;
 		}
 		/*
 		 * TODO: The datasheet waits 1500us here in the example, but
@@ -596,15 +619,15 @@ static int bma400_init(struct bma400_data *data)
 
 	ret = bma400_get_accel_output_data_rate(data);
 	if (ret)
-		goto out;
+		goto err_reg_disable;
 
 	ret = bma400_get_accel_oversampling_ratio(data);
 	if (ret)
-		goto out;
+		goto err_reg_disable;
 
 	ret = bma400_get_accel_scale(data);
 	if (ret)
-		goto out;
+		goto err_reg_disable;
 
 	/*
 	 * Once the interrupt engine is supported we might use the
@@ -614,6 +637,9 @@ static int bma400_init(struct bma400_data *data)
 	 */
 	return regmap_write(data->regmap, BMA400_ACC_CONFIG2_REG, 0x00);
 
+err_reg_disable:
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators),
+			       data->regulators);
 out:
 	return ret;
 }
@@ -809,6 +835,9 @@ int bma400_remove(struct device *dev)
 	ret = bma400_set_power_mode(data, POWER_MODE_SLEEP);
 	mutex_unlock(&data->mutex);
 
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators),
+			       data->regulators);
+
 	iio_device_unregister(indio_dev);
 
 	return ret;
maintainer
#13 lore raw

Re: [PATCH v8 3/3] iio: (bma400) basic regulator support

In reply to Dan Robertson
Quoted 4 lines · On Fri, 20 Dec 2019 16:00:51 +0000 Dan Robertson <[email protected]> wrote:

Add support for the VDD and VDDIO regulators using the regulator framework.

I tweaked a little bit below to drop the select for REGULATOR. That should be unnecessary.

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.

Thanks,

Jonathan

Quoted 11 lines
---
 drivers/iio/accel/Kconfig       |  1 +
 drivers/iio/accel/bma400.h      |  4 ++++
 drivers/iio/accel/bma400_core.c | 39 ++++++++++++++++++++++++++++-----
 3 files changed, 39 insertions(+), 5 deletions(-)
drivers/iio/accel/Kconfig +0 -0
index 670e60568033..9cfe9c790190 100644

drivers/iio/accel/Kconfig config BMA400 · line 119

Quoted 4 lines
drivers/iio/accel/Kconfig +1 -0
@@ -116,6 +116,7 @@ config BMA400
 	tristate "Bosch BMA400 3-Axis Accelerometer Driver"
 	select REGMAP
 	select BMA400_I2C if I2C
+	select REGULATOR

You shouldn't need to select REGULATOR. There are stub functions such that I believe this code should still work fine without it.

This assumes the regulators are always on, but that is valid for some platforms.

Quoted 120 lines
drivers/iio/accel/Kconfig +0 -0
 	help
 	  Say Y here if you want to build a driver for the Bosch BMA400
 	  triaxial acceleration sensor.
drivers/iio/accel/bma400.h +4 -0
index 15c0e307d2c4..5ad10db9819f 100644
@@ -86,6 +86,10 @@
 #define BMA400_SCALE_MIN            38357
 #define BMA400_SCALE_MAX            306864
 
+#define BMA400_NUM_REGULATORS       2
+#define BMA400_VDD_REGULATOR        0
+#define BMA400_VDDIO_REGULATOR      1
+
 extern const struct regmap_config bma400_regmap_config;
 
 int bma400_probe(struct device *dev, struct regmap *regmap, const char *name);
drivers/iio/accel/bma400_core.c +34 -5
index e7ba01e79d2c..61eb676e46be 100644
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 
 #include "bma400.h"
 
@@ -53,6 +54,7 @@ struct bma400_sample_freq {
 struct bma400_data {
 	struct device *dev;
 	struct regmap *regmap;
+	struct regulator_bulk_data regulators[BMA400_NUM_REGULATORS];
 	struct mutex mutex; /* data register lock */
 	struct iio_mount_matrix orientation;
 	enum bma400_power_mode power_mode;
@@ -573,17 +575,38 @@ static int bma400_init(struct bma400_data *data)
 		goto out;
 	}
 
+	data->regulators[BMA400_VDD_REGULATOR].supply = "vdd";
+	data->regulators[BMA400_VDDIO_REGULATOR].supply = "vddio";
+	ret = devm_regulator_bulk_get(data->dev,
+				      ARRAY_SIZE(data->regulators),
+				      data->regulators);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(data->dev,
+				"Failed to get regulators: %d\n",
+				ret);
+
+		goto out;
+	}
+	ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
+				    data->regulators);
+	if (ret) {
+		dev_err(data->dev, "Failed to enable regulators: %d\n",
+			ret);
+		goto out;
+	}
+
 	ret = bma400_get_power_mode(data);
 	if (ret) {
 		dev_err(data->dev, "Failed to get the initial power-mode\n");
-		goto out;
+		goto err_reg_disable;
 	}
 
 	if (data->power_mode != POWER_MODE_NORMAL) {
 		ret = bma400_set_power_mode(data, POWER_MODE_NORMAL);
 		if (ret) {
 			dev_err(data->dev, "Failed to wake up the device\n");
-			goto out;
+			goto err_reg_disable;
 		}
 		/*
 		 * TODO: The datasheet waits 1500us here in the example, but
@@ -596,15 +619,15 @@ static int bma400_init(struct bma400_data *data)
 
 	ret = bma400_get_accel_output_data_rate(data);
 	if (ret)
-		goto out;
+		goto err_reg_disable;
 
 	ret = bma400_get_accel_oversampling_ratio(data);
 	if (ret)
-		goto out;
+		goto err_reg_disable;
 
 	ret = bma400_get_accel_scale(data);
 	if (ret)
-		goto out;
+		goto err_reg_disable;
 
 	/*
 	 * Once the interrupt engine is supported we might use the
@@ -614,6 +637,9 @@ static int bma400_init(struct bma400_data *data)
 	 */
 	return regmap_write(data->regmap, BMA400_ACC_CONFIG2_REG, 0x00);
 
+err_reg_disable:
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators),
+			       data->regulators);
 out:
 	return ret;
 }
@@ -809,6 +835,9 @@ int bma400_remove(struct device *dev)
 	ret = bma400_set_power_mode(data, POWER_MODE_SLEEP);
 	mutex_unlock(&data->mutex);
 
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators),
+			       data->regulators);
+
 	iio_device_unregister(indio_dev);
 
 	return ret;