Skip to contentSkip to conversation

firmware-imx: Fix the ahab-container name

PATCH New Fabio Estevam 3 participants 10 messages Dec 17, 2019 – Dec 26, 2019 Arm i.MX and Layerscape

lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/2 firmware-imx: Fix the ahab-container name

After the firmware-imx bump to version 8.1.1 the following error is observed when building freescale_imx8qxpmek_defconfig:

Quoted 1 line
Quoted 1 line

firmware-imx 8.1.1 Installing to images directory

# SECO firmware is needed when generating imx8-boot-sd.bin which

# is done in post-image script.
cp /home/fabio/buildroot/output/build/firmware-imx-8.1.1/firmware/seco/ahab-container.img
/home/fabio/buildroot/output/images/ahab-container.img
cp: cannot stat
'/home/fabio/buildroot/output/build/firmware-imx-8.1.1/firmware/seco/ahab-container.img':
No such file or directory

In the firmware-imx-8.1.1 (and newer) the i.MX8QXP container image was renamed to mx8qx-ahab-container.img, so fix it accordingly.

Fixes 3ec818769d51 ("package/freescale-imx/firmware-imx: bump version to 8.1.1")
---
 package/freescale-imx/firmware-imx/firmware-imx.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
package/freescale-imx/firmware-imx/firmware-imx.mk +1 -1
index 59af3f9b96..c9040e1853 100644
@@ -50,7 +50,7 @@ FIRMWARE_IMX_INSTALL_IMAGES = YES
 define FIRMWARE_IMX_INSTALL_IMAGES_CMDS
 	# SECO firmware is needed when generating imx8-boot-sd.bin which
 	# is done in post-image script.
-	cp $(@D)/firmware/seco/ahab-container.img \
+	cp $(@D)/firmware/seco/mx8qx-ahab-container.img \
 		$(BINARIES_DIR)/ahab-container.img
 endef
 else
Signature · 1 line
2.17.1
author reviewer
#1 lore raw

PATCH 2/2 configs/imx8qxpmek: Update to 4.14.98 components

Bump kernel, ATF and U-Boot to the versions found in the NXP BSP 4.14.98.

---
 configs/freescale_imx8qxpmek_defconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
configs/freescale_imx8qxpmek_defconfig +4 -4
index 33e2a50dd7..82f433f6cf 100644
@@ -8,7 +8,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="${UBOOT_DIR}/arch/arm/dts/fsl-imx8qxp-mek.dtb"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/linux-imx"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.14.78_1.0.0_ga"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.14.98_2.0.0_ga"
 BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-imx8qxp-mek"
@@ -22,14 +22,14 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/imx-atf"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="rel_imx_4.14.78_1.0.0_ga"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8qxp"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="rel_imx_4.14.98_2.0.0_ga"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8qx"
 BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/uboot-imx"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_4.14.78_1.0.0_ga"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_4.14.98_2.0.0_ga"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8qxp_mek"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
Signature · 1 line
2.17.1
author reviewer
#2 lore raw

PATCH 2/2 configs/imx8qxpmek: Update to 4.14.98 components

Quoted 4 lines · Fabio Estevam

Bump kernel, ATF and U-Boot to the versions found in the NXP BSP 4.14.98.

Please discard this patch, sorry.

I am getting a boot hang with this one applied.

#3 lore raw

PATCH 2/2 configs/imx8qxpmek: Update to 4.14.98 components

Hi Fabio,

Quoted 11 lines · Fabio Estevam
Quoted 5 lines · Fabio Estevam

Bump kernel, ATF and U-Boot to the versions found in the NXP BSP 4.14.98.

Please discard this patch, sorry.

I am getting a boot hang with this one applied.

Apparently, we experience here what I described earlier, in [1]. Updating U-Boot, Kernel and ATF will also need to realign imx-sc-firmware
to the same BSP version. When also applying patch [2] on top of yours, I was able to boot the board again.

Best regards,

Julien.

[1]
http://lists.busybox.net/pipermail/buildroot/2019-December/268824.html
[2]
http://lists.busybox.net/pipermail/buildroot/2019-December/269334.html

author reviewer
#4 lore raw

PATCH 2/2 configs/imx8qxpmek: Update to 4.14.98 components

Hi Julien,

Quoted 5 lines · Julien Olivain

Apparently, we experience here what I described earlier, in [1]. Updating U-Boot, Kernel and ATF will also need to realign imx-sc-firmware
to the same BSP version. When also applying patch [2] on top of yours, I was able to boot the board again.

Excellent! I don't have my imx8qxp mek board handy at the moment, but I suggest bumping to imx-sc-firmware-1.2.2.bin instead of 1.2.1, so that it matches the version stated in the NXP 4.14.98 Release Notes.

Thanks

#5 lore raw

PATCH 2/2 configs/imx8qxpmek: Update to 4.14.98 components

In reply to Fabio Estevam
Quoted 6 lines · On Tue, 17 Dec 2019 15:18:55 -0300 Fabio Estevam <[email protected]> wrote:

Bump kernel, ATF and U-Boot to the versions found in the NXP BSP 4.14.98.

---
 configs/freescale_imx8qxpmek_defconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

I've marked this patch as Changes Requested. Can you send a new iteration once the issues are resolved?

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
author reviewer
#6 lore raw

PATCH 2/2 configs/imx8qxpmek: Update to 4.14.98 components

Hi Thomas,

Quoted 6 lines · Thomas Petazzoni
Quoted 2 lines · On Tue, 17 Dec 2019 15:18:55 -0300 Fabio Estevam <[email protected]> wrote:

Bump kernel, ATF and U-Boot to the versions found in the NXP BSP 4.14.98.

Quoted 7 lines
Quoted 4 lines
---
 configs/freescale_imx8qxpmek_defconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

I've marked this patch as Changes Requested. Can you send a new iteration once the issues are resolved?

As you already applied Julien's patch:
package/freescale-imx/imx-sc-firmware: bump to version 1.2.1

It is safe to apply this one now as Julien's patch fixed the boot issue.

Thanks

#7 lore raw

PATCH 2/2 configs/imx8qxpmek: Update to 4.14.98 components

Quoted 7 lines · On Sun, 22 Dec 2019 11:27:57 -0300 Fabio Estevam <[email protected]> wrote:
Quoted 2 lines

I've marked this patch as Changes Requested. Can you send a new iteration once the issues are resolved?

As you already applied Julien's patch:
package/freescale-imx/imx-sc-firmware: bump to version 1.2.1

It is safe to apply this one now as Julien's patch fixed the boot issue.

Thanks for the confirmation, I've applied Julien's patch now.

Thanks,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#8 lore raw

PATCH 2/2 configs/imx8qxpmek: Update to 4.14.98 components

In reply to Fabio Estevam
Quoted 6 lines · On Tue, 17 Dec 2019 15:18:55 -0300 Fabio Estevam <[email protected]> wrote:

Bump kernel, ATF and U-Boot to the versions found in the NXP BSP 4.14.98.

---
 configs/freescale_imx8qxpmek_defconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Applied to master, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#9 lore raw

PATCH 1/2 firmware-imx: Fix the ahab-container name

In reply to Fabio Estevam
Quoted 12 lines · On Tue, 17 Dec 2019 15:18:54 -0300 Fabio Estevam <[email protected]> wrote:

After the firmware-imx bump to version 8.1.1 the following error is observed when building freescale_imx8qxpmek_defconfig:

Quoted 1 line
Quoted 1 line

firmware-imx 8.1.1 Installing to images directory

# SECO firmware is needed when generating imx8-boot-sd.bin which

# is done in post-image script.
cp /home/fabio/buildroot/output/build/firmware-imx-8.1.1/firmware/seco/ahab-container.img
/home/fabio/buildroot/output/images/ahab-container.img
cp: cannot stat
'/home/fabio/buildroot/output/build/firmware-imx-8.1.1/firmware/seco/ahab-container.img':
No such file or directory
Quoted 8 lines

In the firmware-imx-8.1.1 (and newer) the i.MX8QXP container image was renamed to mx8qx-ahab-container.img, so fix it accordingly.

Fixes 3ec818769d51 ("package/freescale-imx/firmware-imx: bump version to 8.1.1")
---
 package/freescale-imx/firmware-imx/firmware-imx.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Applied to master, thanks.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com