net/sched: act_mirred: Ensure mac_len is pulled prior redirect to a non mac_header_xmit target device
Subsystems (3)
PATCH 1/1 net/sched: act_mirred: Ensure mac_len is pulled prior redirect to a non mac_header_xmit target device
From: Shmulik Ladkani <[email protected]>
There's no skb_pull performed when a mirred action is set at egress of a mac device, with a target device/action that expects skb->data to point at the network header.
As a result, either the target device is errornously given an skb with data pointing to the mac (egress case), or the net stack receives the skb with data pointing to the mac (ingress case).
E.g:
# tc qdisc add dev eth9 root handle 1: prio # tc filter add dev eth9 parent 1: prio 9 protocol ip handle 9 basic \ action mirred egress redirect dev tun0
(tun0 is a tun device. result: tun0 errornously gets the eth header
instead of the iph)
Revise the push/pull logic of tcf_mirred_act() to not rely on the skb_at_tc_ingress() vs tcf_mirred_act_wants_ingress() comparison, as it does not cover all "pull" cases.
Instead, calculate whether the required action on the target device requires the data to point at the network header, and compare this to whether skb->data points to network header - and make the push/pull adjustments as necessary.
--- net/sched/act_mirred.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)
net/sched/act_mirred.c +12 -10
@@ -219,8 +219,10 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,bool use_reinsert;bool want_ingress;bool is_redirect; +bool expects_nh;int m_eaction;int mac_len; +bool at_nh; rec_level =__this_cpu_inc_return (mirred_rec_level);if (unlikely (rec_level >MIRRED_RECURSION_LIMIT )) {
@@ -261,19 +263,19 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a, goto out; } -/* If action's target direction differs than filter's direction, -* and devices expect a mac header on xmit, then mac push/pull is -* needed. -*/ want_ingress =tcf_mirred_act_wants_ingress (m_eaction); -if (skb_at_tc_ingress (skb) != want_ingress && m_mac_header_xmit) { -if (!skb_at_tc_ingress (skb)) { -/* caught at egress, act ingress: pull mac */ - mac_len =skb_network_header (skb) -skb_mac_header (skb); + + expects_nh = want_ingress || !m_mac_header_xmit; + at_nh = skb->data ==skb_network_header (skb); +if (at_nh != expects_nh) { + mac_len =skb_at_tc_ingress (skb) ? skb->mac_len : +skb_network_header (skb) -skb_mac_header (skb); +if (expects_nh) { +/* target device/action expect data at nh */ skb_pull_rcsum (skb2, mac_len); }else { -/* caught at ingress, act egress: push mac */ -skb_push_rcsum (skb2, skb->mac_len); +/* target device/action expect data at mac */ +skb_push_rcsum (skb2, mac_len); } }
Signature · 1 line
2.24.1
Quoted 10 lines · On 2019-12-23 7:33 a.m., [email protected] wrote:
From: Shmulik Ladkani <[email protected]>
There's no
skb_pullperformed when a mirred action is set at egress of a mac device, with a target device/action that expectsskb->datato point at the network header.As a result, either the target device is errornously given an skb with data pointing to the mac (egress case), or the net stack receives the skb with data pointing to the mac (ingress case).
Quoted 8 lines
E.g:
# tc qdisc add dev eth9 root handle 1: prio # tc filter add dev eth9 parent 1: prio 9 protocol ip handle 9 basic \ action mirred egress redirect dev tun0(tun0 is a tun device. result: tun0 errornously gets the eth header
instead of the iph)
Shmulik - are you able to add a tdc testcase? It will be helpful to catch future regressions.
I did basic testing i.e have an app reading tun0 from user space then mirrored(not redirect) packets to tun0 for before and after patch.
Quoted 10 lines
Revise the push/pull logic of
tcf_mirred_act()to not rely on theskb_at_tc_ingress()vstcf_mirred_act_wants_ingress()comparison, as it does not cover all "pull" cases.Instead, calculate whether the required action on the target device requires the data to point at the network header, and compare this to whether
skb->datapoints to network header - and make the push/pull adjustments as necessary.Signed-off-by Shmulik Ladkani <[email protected]>
cheers,
jamal
Quoted 2 lines · On Tue, 24 Dec 2019 07:45:08 -0500 Jamal Hadi Salim <[email protected]> wrote:
Shmulik - are you able to add a tdc testcase? It will be helpful to catch future regressions.
Sure, I'll try to cook something, different submission.
Quoted 19 lines · On Mon, Dec 23, 2019 at 4:33 AM <[email protected]> wrote:
From: Shmulik Ladkani <[email protected]>
There's no
skb_pullperformed when a mirred action is set at egress of a mac device, with a target device/action that expectsskb->datato point at the network header.As a result, either the target device is errornously given an skb with data pointing to the mac (egress case), or the net stack receives the skb with data pointing to the mac (ingress case).
E.g:
# tc qdisc add dev eth9 root handle 1: prio # tc filter add dev eth9 parent 1: prio 9 protocol ip handle 9 basic \ action mirred egress redirect dev tun0(tun0 is a tun device. result: tun0 errornously gets the eth header
instead of the iph)
Quoted 8 lines
Revise the push/pull logic of
tcf_mirred_act()to not rely on theskb_at_tc_ingress()vstcf_mirred_act_wants_ingress()comparison, as it does not cover all "pull" cases.Instead, calculate whether the required action on the target device requires the data to point at the network header, and compare this to whether
skb->datapoints to network header - and make the push/pull adjustments as necessary.
This is a bug fix, please target it for -net and add a proper Fixes tag.
BTW, please make the subject shorter.
Thanks.
Quoted 3 lines · On Tue, 24 Dec 2019 12:43:32 -0800 Cong Wang <[email protected]> wrote:
This is a bug fix, please target it for -net and add a proper Fixes tag.
BTW, please make the subject shorter.
Thanks. Will resubmit to -net