Skip to contentSkip to conversation

net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S

PATCH In review Vladimir Oltean 2 participants 2 messages Dec 27, 2019 – Dec 31, 2019

Subsystems (4)
lore
Share & tools
lore

Vladimir Oltean

author maintainer
#0 lore raw

PATCH 1/1 net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S

For first-generation switches (SJA1105E and SJA1105T):
- TPID means C-Tag (typically 0x8100)
- TPID2 means S-Tag (typically 0x88A8)

While for the second generation switches (SJA1105P, SJA1105Q, SJA1105R, SJA1105S) it is the other way around:
- TPID means S-Tag (typically 0x88A8)
- TPID2 means C-Tag (typically 0x8100)

In other words, E/T tags untagged traffic with TPID, and P/Q/R/S with TPID2.

So the patch mentioned below fixed VLAN filtering for P/Q/R/S, but broke it for E/T.

We strive for a common code path for all switches in the family, so just lie in the static config packing functions that TPID and TPID2 are at swapped bit offsets than they actually are, for P/Q/R/S. This will make both switches understand TPID to be ETH_P_8021Q and TPID2 to be ETH_P_8021AD. The meaning from the original E/T was chosen over P/Q/R/S because E/T is actually the one with public documentation available (UM10944.pdf).

Fixes f9a1a7646c0d ("net: dsa: sja1105: Reverse TPID and TPID2")
---
 drivers/net/dsa/sja1105/sja1105_main.c          | 8 ++++----
 drivers/net/dsa/sja1105/sja1105_static_config.c | 7 +++++--
 2 files changed, 9 insertions(+), 6 deletions(-)
drivers/net/dsa/sja1105/sja1105_main.c +4 -4
index 2cf32c22e839..d5245e48345a 100644
@@ -1575,8 +1575,8 @@ static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
 
 	if (enabled) {
 		/* Enable VLAN filtering. */
-		tpid  = ETH_P_8021AD;
-		tpid2 = ETH_P_8021Q;
+		tpid  = ETH_P_8021Q;
+		tpid2 = ETH_P_8021AD;
 	} else {
 		/* Disable VLAN filtering. */
 		tpid  = ETH_P_SJA1105;
@@ -1585,9 +1585,9 @@ static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
 
 	table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS];
 	general_params = table->entries;
-	/* EtherType used to identify outer tagged (S-tag) VLAN traffic */
-	general_params->tpid = tpid;
 	/* EtherType used to identify inner tagged (C-tag) VLAN traffic */
+	general_params->tpid = tpid;
+	/* EtherType used to identify outer tagged (S-tag) VLAN traffic */
 	general_params->tpid2 = tpid2;
 	/* When VLAN filtering is on, we need to at least be able to
 	 * decode management traffic through the "backup plan".
drivers/net/dsa/sja1105/sja1105_static_config.c +5 -2
index eb143a6506eb..a65f2a437358 100644
@@ -158,6 +158,9 @@ static size_t sja1105et_general_params_entry_packing(void *buf, void *entry_ptr,
 	return size;
 }
 
+/* TPID and TPID2 are intentionally reversed so that semantic
+ * compatibility with E/T is kept.
+ */
 static size_t
 sja1105pqrs_general_params_entry_packing(void *buf, void *entry_ptr,
 					 enum packing_op op)
@@ -182,9 +185,9 @@ sja1105pqrs_general_params_entry_packing(void *buf, void *entry_ptr,
 	sja1105_packing(buf, &entry->mirr_port,   141, 139, size, op);
 	sja1105_packing(buf, &entry->vlmarker,    138, 107, size, op);
 	sja1105_packing(buf, &entry->vlmask,      106,  75, size, op);
-	sja1105_packing(buf, &entry->tpid,         74,  59, size, op);
+	sja1105_packing(buf, &entry->tpid2,        74,  59, size, op);
 	sja1105_packing(buf, &entry->ignore2stf,   58,  58, size, op);
-	sja1105_packing(buf, &entry->tpid2,        57,  42, size, op);
+	sja1105_packing(buf, &entry->tpid,         57,  42, size, op);
 	sja1105_packing(buf, &entry->queue_ts,     41,  41, size, op);
 	sja1105_packing(buf, &entry->egrmirrvid,   40,  29, size, op);
 	sja1105_packing(buf, &entry->egrmirrpcp,   28,  26, size, op);
Signature · 1 line
2.17.1
maintainer
#1 lore raw

From: Vladimir Oltean <[email protected]>
Date: Fri, 27 Dec 2019 03:11:13 +0200

Quoted 23 lines

For first-generation switches (SJA1105E and SJA1105T):
- TPID means C-Tag (typically 0x8100)
- TPID2 means S-Tag (typically 0x88A8)

While for the second generation switches (SJA1105P, SJA1105Q, SJA1105R, SJA1105S) it is the other way around:
- TPID means S-Tag (typically 0x88A8)
- TPID2 means C-Tag (typically 0x8100)

In other words, E/T tags untagged traffic with TPID, and P/Q/R/S with TPID2.

So the patch mentioned below fixed VLAN filtering for P/Q/R/S, but broke it for E/T.

We strive for a common code path for all switches in the family, so just lie in the static config packing functions that TPID and TPID2 are at swapped bit offsets than they actually are, for P/Q/R/S. This will make both switches understand TPID to be ETH_P_8021Q and TPID2 to be ETH_P_8021AD. The meaning from the original E/T was chosen over P/Q/R/S because E/T is actually the one with public documentation available (UM10944.pdf).

Quoted 2 lines
Fixes f9a1a7646c0d ("net: dsa: sja1105: Reverse TPID and TPID2")

Applied and queued up for -stable, thanks.