drm/i915: Add support for non-power-of-2 FB plane alignment
Subsystems (3)
PATCH 1/3 drm/i915: Add support for non-power-of-2 FB plane alignment
At least one framebuffer plane on TGL - the UV plane of YUV semiplanar FBs - requires a non-power-of-2 alignment, so add support for this. This new alignment restriction applies only to an offset within an FB, so the GEM buffer itself containing the FB must still be power-of-2 aligned. Add a check for this (in practice plane 0, since the plane 0 offset must be 0).
--- drivers/gpu/drm/i915/display/intel_display.c | 22 +++++++++++++------- 1 file changed, 14 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +14 -8
@@ -2194,6 +2194,7 @@ intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb,return ERR_PTR (-EINVAL ); alignment =intel_surf_alignment (fb,0 ); +WARN_ON (!is_power_of_2 (alignment));/* Note that the w/a also requires 64 PTE of padding following the * bo. We currently fill all unused PTE with the shadow page and so
@@ -2432,9 +2433,6 @@ static u32 intel_compute_aligned_offset(struct drm_i915_private *dev_priv,unsigned int cpp = fb->format->cpp[color_plane];u32 offset, offset_aligned; -if (alignment) - alignment--; -if (!is_surface_linear (fb, color_plane)) {unsigned int tile_size, tile_width, tile_height;unsigned int tile_rows, tiles, pitch_tiles;
@@ -2456,17 +2454,24 @@ static u32 intel_compute_aligned_offset(struct drm_i915_private *dev_priv, *x %= tile_width; offset = (tile_rows * pitch_tiles + tiles) * tile_size; - offset_aligned = offset & ~alignment; + + offset_aligned = offset; +if (alignment) + offset_aligned =rounddown (offset_aligned, alignment);intel_adjust_tile_offset (x, y, tile_width, tile_height, tile_size, pitch_tiles, offset, offset_aligned); }else { offset = *y * pitch + *x * cpp; - offset_aligned = offset & ~alignment; - - *y = (offset & alignment) / pitch; - *x = ((offset & alignment) - *y * pitch) / cpp; + offset_aligned = offset; +if (alignment) { + offset_aligned =rounddown (offset_aligned, alignment); + *y = (offset % alignment) / pitch; + *x = ((offset % alignment) - *y * pitch) / cpp; + }else { + *y = *x =0 ; + } }return offset_aligned;
@@ -3738,6 +3743,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)intel_add_fb_offsets (&x, &y, plane_state,0 ); offset =intel_plane_compute_aligned_offset (&x, &y, plane_state,0 ); alignment =intel_surf_alignment (fb,0 ); +WARN_ON (!is_power_of_2 (alignment));/* * AUX surface offset is specified as the distance from the
Signature · 6 lines
2.23.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/3 drm/i915/tgl: Make sure a semiplanar UV plane is tile row size aligned
Currently the start address of a UV plane in a semiplanar YUV FB is tile size (4kB) aligned. I noticed, that enforcing only this alignment leads oddly to random memory corruptions on TGL while scanning out Y-tiled FBs. This issue can be easily reproduced with a UV plane that is not aligned to the plane's tile row size.
Some experiments showed the correct alignment to be tile row size indeed. This also makes sense, since the de-tiling fence created for the object - with its own stride and so "left" and "right" edge - applies to all the planes in the FB, so each tile row of all planes should be tile row aligned.
In fact BSpec requires this alignment since SKL. On SKL we may enforce this due to the AUX plane x,y coords check, but on ICL and TGL we don't. For now enforce this only on TGL; I can follow up with any necessary change for ICL after more tests.
BSpec requires a stricter alignment for linear UV planes too (kind of a tile row alignment), but it's unclear whether that's really needed (couldn't be explained with the de-tiling fence as above) and enforcing that could break existing user space; so avoid that too for now until more tests.
--- drivers/gpu/drm/i915/display/intel_display.c | 36 ++++++++++++++++++-- 1 file changed, 33 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +33 -3
@@ -1995,6 +1995,13 @@ intel_format_info_is_yuv_semiplanar(const struct drm_format_info *info, info->num_planes == (is_ccs_modifier (modifier) ?4 :2 ); } +static bool is_semiplanar_uv_plane (const struct drm_framebuffer *fb, +int color_plane) +{ +return intel_format_info_is_yuv_semiplanar (fb->format, fb->modifier) && + color_plane ==1 ; +} +static unsigned int intel_tile_width_bytes (const struct drm_framebuffer *fb,int color_plane) {
@@ -2069,6 +2076,16 @@ static void intel_tile_dims(const struct drm_framebuffer *fb, int color_plane, *tile_height =intel_tile_height (fb, color_plane); } +static unsigned int intel_tile_row_size (const struct drm_framebuffer *fb, +int color_plane) +{ +unsigned int tile_width, tile_height; + +intel_tile_dims (fb, color_plane, &tile_width, &tile_height); + +return fb->pitches[color_plane] * tile_height; +} +unsigned int intel_fb_align_height (const struct drm_framebuffer *fb,int color_plane,unsigned int height)
@@ -2143,7 +2160,8 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,struct drm_i915_private *dev_priv =to_i915 (fb->dev);/* AUX_DIST needs only 4K alignment */ -if (is_aux_plane (fb, color_plane)) +if ((INTEL_GEN (dev_priv) <12 &&is_aux_plane (fb, color_plane)) || +is_ccs_plane (fb, color_plane))return 4096 ;switch (fb->modifier) {
@@ -2158,6 +2176,10 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Yf_TILED_CCS:case I915_FORMAT_MOD_Y_TILED : +if (INTEL_GEN (dev_priv) >=12 && +is_semiplanar_uv_plane (fb, color_plane)) +return intel_tile_row_size (fb, color_plane); +/* Fall-through */ case I915_FORMAT_MOD_Yf_TILED:return 1 *1024 *1024 ;default :
@@ -2504,9 +2526,17 @@ static int intel_fb_offset_to_xy(int *x, int *y, {struct drm_i915_private *dev_priv =to_i915 (fb->dev);unsigned int height; +u32 alignment; + +if (INTEL_GEN (dev_priv) >=12 && +is_semiplanar_uv_plane (fb, color_plane)) + alignment =intel_tile_row_size (fb, color_plane); +else if (fb->modifier !=DRM_FORMAT_MOD_LINEAR ) + alignment =intel_tile_size (dev_priv); +else + alignment =0 ; -if (fb->modifier !=DRM_FORMAT_MOD_LINEAR && - fb->offsets[color_plane] %intel_tile_size (dev_priv)) { +if (alignment !=0 && fb->offsets[color_plane] % alignment) {DRM_DEBUG_KMS ("Misaligned offset 0x%08x for color plane %d\n" , fb->offsets[color_plane], color_plane);return -EINVAL ;
Signature · 6 lines
2.23.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH 2/3] drm/i915/tgl: Make sure a semiplanar UV plane is tile row size aligned
Quoting Imre Deak (2019-12-27 23:51:46)
Quoted 8 lines
Currently the start address of a UV plane in a semiplanar YUV FB is tile size (4kB) aligned. I noticed, that enforcing only this alignment leads oddly to random memory corruptions on TGL while scanning out Y-tiled FBs. This issue can be easily reproduced with a UV plane that is not aligned to the plane's tile row size.
Some experiments showed the correct alignment to be tile row size indeed. This also makes sense, since the de-tiling fence created for the
One would expect the implicit fence to follow the fence detiling HW logic, which does not require tile-row alignment, just 4096 alignment (since gen4). That suggests this logic is peculiar to the display engine.
Quoted 8 lines
object - with its own stride and so "left" and "right" edge - applies to all the planes in the FB, so each tile row of all planes should be tile row aligned.
In fact BSpec requires this alignment since SKL. On SKL we may enforce this due to the AUX plane x,y coords check, but on ICL and TGL we don't. For now enforce this only on TGL; I can follow up with any necessary change for ICL after more tests.
Considering the severity of the error, I strongly suggest we fix all suspected machines and Cc:stable.
Quoted 10 lines
BSpec requires a stricter alignment for linear UV planes too (kind of a tile row alignment), but it's unclear whether that's really needed (couldn't be explained with the de-tiling fence as above) and enforcing that could break existing user space; so avoid that too for now until more tests.
Cc Chris Wilson <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Imre Deak <[email protected]>---
drivers/gpu/drm/i915/display/intel_display.c static void intel_tile_dims(const struct drm_framebuffer *fb, int color_plane, · line 2086
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c +8
-0+static unsigned int intel_tile_row_size (const struct drm_framebuffer *fb, +int color_plane) +{ +unsigned int tile_width, tile_height; + +intel_tile_dims (fb, color_plane, &tile_width, &tile_height); + +return fb->pitches[color_plane] * tile_height;
Ok, that is tile_row_size.
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [Intel-gfx] [PATCH 2/3] drm/i915/tgl: Make sure a semiplanar UV plane is tile row size aligned
Quoted 7 lines · Chris Wilson
Quoting Imre Deak (2019-12-27 23:51:46)
Quoted 6 lines
Currently the start address of a UV plane in a semiplanar YUV FB is tile size (4kB) aligned. I noticed, that enforcing only this alignment leads oddly to random memory corruptions on TGL while scanning out Y-tiled FBs. This issue can be easily reproduced with a UV plane that is not aligned to the plane's tile row size.
Quoted 6 lines
Quoted 2 lines
Some experiments showed the correct alignment to be tile row size indeed. This also makes sense, since the de-tiling fence created for the
One would expect the implicit fence to follow the fence detiling HW logic, which does not require tile-row alignment, just 4096 alignment (since gen4). That suggests this logic is peculiar to the display engine.
Not sure what's an implicit fence, I only considered the fence we add (which is added at offset 0 for the whole object via the set_tiling IOCTL). But I suppose you mean the display would use its own fence even if we don't add one (since an explicit fence for display is not needed for a while now). Not sure what's the exact reason for the spec's tile-row alignment restriction for UV surface addresses, maybe it's required both by an implicit or explicit fence. Note that I haven't seen the memory corruption if I didn't add the explicit fence for the object, but I haven't checked if there are other problems even then, once I noticed the spec alignment requirement.
To me what's logical as a rule is to not wrap around the right edge of the fence (implicit or explicit) by programming a display surface base address and an x offset. That would also mean that the stride of FB surfaces (for planar YUV surfaces all surface stride's being the same) match the stride of an implicit or explicit fence. Not sure if we enforce all these.
Quoted 11 lines
Quoted 8 lines
object - with its own stride and so "left" and "right" edge - applies to all the planes in the FB, so each tile row of all planes should be tile row aligned.
In fact BSpec requires this alignment since SKL. On SKL we may enforce this due to the AUX plane x,y coords check, but on ICL and TGL we don't. For now enforce this only on TGL; I can follow up with any necessary change for ICL after more tests.
Considering the severity of the error, I strongly suggest we fix all suspected machines and Cc:stable.
Ok, will add Cc now to this one, but would follow up with other machines after more empirical proofs.
Quoted 6 lines
Quoted 6 lines
BSpec requires a stricter alignment for linear UV planes too (kind of a tile row alignment), but it's unclear whether that's really needed (couldn't be explained with the de-tiling fence as above) and enforcing that could break existing user space; so avoid that too for now until more tests.
Quoted 15 lines
drivers/gpu/drm/i915/display/intel_display.c static void intel_tile_dims(const struct drm_framebuffer *fb, int color_plane, · line 2086
Quoted 12 lines
Cc Chris Wilson <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Imre Deak <[email protected]>---
drivers/gpu/drm/i915/display/intel_display.c +8
-0+static unsigned int intel_tile_row_size (const struct drm_framebuffer *fb, +int color_plane) +{ +unsigned int tile_width, tile_height; + +intel_tile_dims (fb, color_plane, &tile_width, &tile_height); + +return fb->pitches[color_plane] * tile_height;Ok, that is
tile_row_size.
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Chris Wilson
Acked-byRe: [Intel-gfx] [PATCH 2/3] drm/i915/tgl: Make sure a semiplanar UV plane is tile row size aligned
Quoting Imre Deak (2019-12-30 19:20:36)
Quoted 42 lines · Chris Wilson
Quoted 7 lines
Quoting Imre Deak (2019-12-27 23:51:46)
Quoted 6 lines
Currently the start address of a UV plane in a semiplanar YUV FB is tile size (4kB) aligned. I noticed, that enforcing only this alignment leads oddly to random memory corruptions on TGL while scanning out Y-tiled FBs. This issue can be easily reproduced with a UV plane that is not aligned to the plane's tile row size.
Quoted 6 lines
Quoted 2 lines
Some experiments showed the correct alignment to be tile row size indeed. This also makes sense, since the de-tiling fence created for the
One would expect the implicit fence to follow the fence detiling HW logic, which does not require tile-row alignment, just 4096 alignment (since gen4). That suggests this logic is peculiar to the display engine.
Not sure what's an implicit fence, I only considered the fence we add (which is added at offset 0 for the whole object via the
set_tilingIOCTL). But I suppose you mean the display would use its own fence even if we don't add one (since an explicit fence for display is not needed for a while now). Not sure what's the exact reason for the spec's tile-row alignment restriction for UV surface addresses, maybe it's required both by an implicit or explicit fence. Note that I haven't seen the memory corruption if I didn't add the explicit fence for the object, but I haven't checked if there are other problems even then, once I noticed the spec alignment requirement.To me what's logical as a rule is to not wrap around the right edge of the fence (implicit or explicit) by programming a display surface base address and an x offset. That would also mean that the stride of FB surfaces (for planar YUV surfaces all surface stride's being the same) match the stride of an implicit or explicit fence. Not sure if we enforce all these.
Quoted 9 lines
Quoted 8 lines
object - with its own stride and so "left" and "right" edge - applies to all the planes in the FB, so each tile row of all planes should be tile row aligned.
In fact BSpec requires this alignment since SKL. On SKL we may enforce this due to the AUX plane x,y coords check, but on ICL and TGL we don't. For now enforce this only on TGL; I can follow up with any necessary change for ICL after more tests.
Quoted 5 lines
Quoted 2 lines
Considering the severity of the error, I strongly suggest we fix all suspected machines and Cc:stable.
Ok, will add Cc now to this one, but would follow up with other machines after more empirical proofs.
Personally, I would do it in one patch. The downside of imposing a stricter alignment is increased fragmentation (and perhaps the occasional bit of rebinding), which should be of little concern.
If you can figure out the meaning of the rule, please do add it to the changelog and comments,
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 3/3 drm/i915: Add debug message for FB plane[0].offset!=0 error
In reply to Imre DeakPrint a debug message if the FB plane[0] offset is not 0 as expected, to help understainding an add FB IOCTL fail.
--- drivers/gpu/drm/i915/display/intel_display.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display.c +4 -1
@@ -16723,8 +16723,11 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb, }/* FIXME need to adjust LINOFF/TILEOFF accordingly. */ -if (mode_cmd->offsets[0 ] !=0 ) +if (mode_cmd->offsets[0 ] !=0 ) { +DRM_DEBUG_KMS ("plane 0 offset (0x%08x) must be 0\n" , + mode_cmd->offsets[0 ]); goto err; + }drm_helper_mode_fill_fb_struct (&dev_priv->drm, fb, mode_cmd);
Signature · 6 lines
2.23.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✗ Fi.CI.BAT: failure for series starting with [1/3] drm/i915: Add support for non-power-of-2 FB plane alignment
In reply to Imre Deak== Series Details ==
== Series Details ==
Series: series starting with [1/3] drm/i915: Add support for non-power-of-2 FB plane alignment
URL : https://patchwork.freedesktop.org/series/71444/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_7644 -> Patchwork_15934
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_15934 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_15934, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_15934:
### IGT changes ###
#### Possible regressions ####
* igt@kms_busy@basic-flip-pipe-a:
- fi-ivb-3770: [PASS][1] -> [DMESG-WARN][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-ivb-3770/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-ivb-3770/igt@[email protected]
- fi-ilk-650: NOTRUN -> [DMESG-WARN][3]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-ilk-650/igt@[email protected]
- fi-snb-2600: NOTRUN -> [DMESG-WARN][4]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-snb-2600/igt@[email protected]
- fi-bsw-kefka: [PASS][5] -> [DMESG-WARN][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-bsw-kefka/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-bsw-kefka/igt@[email protected]
- fi-hsw-peppy: NOTRUN -> [DMESG-WARN][7]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-hsw-peppy/igt@[email protected]
- fi-bdw-5557u: [PASS][8] -> [DMESG-WARN][9]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-bdw-5557u/igt@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-bdw-5557u/igt@[email protected]
- fi-snb-2520m: [PASS][10] -> [DMESG-WARN][11]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-snb-2520m/igt@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-snb-2520m/igt@[email protected]
- fi-hsw-4770: [PASS][12] -> [DMESG-WARN][13]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-hsw-4770/igt@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-hsw-4770/igt@[email protected]
- fi-byt-n2820: [PASS][14] -> [DMESG-WARN][15]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-byt-n2820/igt@[email protected]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-byt-n2820/igt@[email protected]
- fi-elk-e7500: [PASS][16] -> [DMESG-WARN][17]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-elk-e7500/igt@[email protected]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-elk-e7500/igt@[email protected]
- fi-byt-j1900: NOTRUN -> [DMESG-WARN][18]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-byt-j1900/igt@[email protected]
* igt@kms_busy@basic-flip-pipe-c:
- fi-bsw-n3050: [PASS][19] -> [DMESG-WARN][20]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-bsw-n3050/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-bsw-n3050/igt@[email protected]
* igt@runner@aborted:
- fi-pnv-d510: NOTRUN -> [FAIL][21]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-pnv-d510/igt@[email protected]
- fi-hsw-peppy: NOTRUN -> [FAIL][22]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-hsw-peppy/igt@[email protected]
- fi-gdg-551: NOTRUN -> [FAIL][23]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-gdg-551/igt@[email protected]
- fi-snb-2520m: NOTRUN -> [FAIL][24]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-snb-2520m/igt@[email protected]
- fi-byt-n2820: NOTRUN -> [FAIL][25]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-byt-n2820/igt@[email protected]
- fi-hsw-4770: NOTRUN -> [FAIL][26]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-hsw-4770/igt@[email protected]
- fi-snb-2600: NOTRUN -> [FAIL][27]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-snb-2600/igt@[email protected]
- fi-ivb-3770: NOTRUN -> [FAIL][28]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-ivb-3770/igt@[email protected]
- fi-byt-j1900: NOTRUN -> [FAIL][29]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-byt-j1900/igt@[email protected]
- fi-blb-e6850: NOTRUN -> [FAIL][30]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-blb-e6850/igt@[email protected]
Known issues
------------
Here are the changes found in Patchwork_15934 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_module_load@reload-with-fault-injection:
- fi-skl-6700k2: [PASS][31] -> [INCOMPLETE][32] ([i915#671])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-skl-6700k2/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-skl-6700k2/igt@[email protected]
* igt@i915_pm_rpm@module-reload:
- fi-kbl-guc: [PASS][33] -> [SKIP][34] ([fdo#109271])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-kbl-guc/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-kbl-guc/igt@[email protected]
* igt@i915_selftest@live_blt:
- fi-bsw-nick: [PASS][35] -> [DMESG-FAIL][36] ([i915#723])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-bsw-nick/igt@i915_selftest@live_blt.html
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-bsw-nick/igt@i915_selftest@live_blt.html
* igt@i915_selftest@live_gem_contexts:
- fi-cfl-8700k: [PASS][37] -> [INCOMPLETE][38] ([i915#424])
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-cfl-8700k/igt@i915_selftest@live_gem_contexts.html
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-cfl-8700k/igt@i915_selftest@live_gem_contexts.html
- fi-cfl-guc: [PASS][39] -> [INCOMPLETE][40] ([fdo#106070] / [i915#424])
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-cfl-guc/igt@i915_selftest@live_gem_contexts.html
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-cfl-guc/igt@i915_selftest@live_gem_contexts.html
#### Possible fixes ####
* igt@i915_module_load@reload-with-fault-injection:
- fi-skl-6770hq: [INCOMPLETE][41] ([i915#671]) -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-skl-6770hq/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-skl-6770hq/igt@[email protected]
- fi-skl-lmem: [INCOMPLETE][43] ([i915#671]) -> [PASS][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-skl-lmem/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-skl-lmem/igt@[email protected]
* igt@i915_pm_rpm@module-reload:
- fi-skl-6600u: [DMESG-WARN][45] ([i915#889]) -> [PASS][46] +13 similar issues
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-skl-6600u/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-skl-6600u/igt@[email protected]
* igt@i915_selftest@live_client:
- fi-skl-6600u: [DMESG-WARN][47] -> [PASS][48] +9 similar issues
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-skl-6600u/igt@i915_selftest@live_client.html
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-skl-6600u/igt@i915_selftest@live_client.html
* igt@i915_selftest@live_gt_engines:
- fi-bxt-dsi: [DMESG-FAIL][49] ([i915#889]) -> [PASS][50] +3 similar issues
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-bxt-dsi/igt@i915_selftest@live_gt_engines.html
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-bxt-dsi/igt@i915_selftest@live_gt_engines.html
* igt@i915_selftest@live_gt_lrc:
- fi-skl-6600u: [DMESG-FAIL][51] ([i915#889]) -> [PASS][52] +3 similar issues
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-skl-6600u/igt@i915_selftest@live_gt_lrc.html
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-skl-6600u/igt@i915_selftest@live_gt_lrc.html
* igt@i915_selftest@live_hugepages:
- fi-bxt-dsi: [DMESG-WARN][53] -> [PASS][54] +9 similar issues
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-bxt-dsi/igt@i915_selftest@live_hugepages.html
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-bxt-dsi/igt@i915_selftest@live_hugepages.html
* igt@i915_selftest@live_mman:
- fi-bxt-dsi: [DMESG-WARN][55] ([i915#889]) -> [PASS][56] +13 similar issues
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-bxt-dsi/igt@i915_selftest@live_mman.html
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-bxt-dsi/igt@i915_selftest@live_mman.html
* igt@i915_selftest@live_reset:
- fi-skl-6600u: [DMESG-FAIL][57] -> [PASS][58] +3 similar issues
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-skl-6600u/igt@i915_selftest@live_reset.html
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-skl-6600u/igt@i915_selftest@live_reset.html
- fi-bxt-dsi: [DMESG-FAIL][59] -> [PASS][60] +3 similar issues
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-bxt-dsi/igt@i915_selftest@live_reset.html
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-bxt-dsi/igt@i915_selftest@live_reset.html
#### Warnings ####
* igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy:
- fi-kbl-x1275: [DMESG-WARN][61] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][62] ([i915#62] / [i915#92]) +3 similar issues
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-kbl-x1275/igt@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-kbl-x1275/igt@[email protected]
* igt@kms_force_connector_basic@force-edid:
- fi-kbl-x1275: [DMESG-WARN][63] ([i915#62] / [i915#92]) -> [DMESG-WARN][64] ([i915#62] / [i915#92] / [i915#95]) +4 similar issues
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-kbl-x1275/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/fi-kbl-x1275/igt@[email protected]
[fdo#106070]: https://bugs.freedesktop.org/show_bug.cgi?id=106070
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#424]: https://gitlab.freedesktop.org/drm/intel/issues/424
[i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62
[i915#671]: https://gitlab.freedesktop.org/drm/intel/issues/671
[i915#723]: https://gitlab.freedesktop.org/drm/intel/issues/723
[i915#889]: https://gitlab.freedesktop.org/drm/intel/issues/889
[i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (42 -> 42)
------------------------------
Additional (8): fi-byt-j1900 fi-hsw-peppy fi-ilk-650 fi-gdg-551 fi-kbl-8809g fi-blb-e6850 fi-kbl-r fi-snb-2600
Missing (8): fi-hsw-4770r fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-bwr-2160 fi-ctg-p8600 fi-byt-clapper fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_7644 -> Patchwork_15934
CI-20190529: 20190529
CI_DRM_7644: 103086964d18ac22a8e333b9ea7649f67c468f7b @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5352: 0586d205f651674e575351c2d5a7d0760716c9f1 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_15934: 80df0ef0833e4d109e47cbf329160cbcb2dd1645 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
80df0ef0833e drm/i915: Add debug message for FB plane[0].offset!=0 error 0f0022b981cb drm/i915/tgl: Make sure a semiplanar UV plane is tile row size aligned ed691a592743 drm/i915: Add support for non-power-of-2 FB plane alignment
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15934/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/3 drm/i915: Add support for non-power-of-2 FB plane alignment
In reply to Imre DeakAt least one framebuffer plane on TGL - the UV plane of YUV semiplanar FBs - requires a non-power-of-2 alignment, so add support for this. This new alignment restriction applies only to an offset within an FB, so the GEM buffer itself containing the FB must still be power-of-2 aligned. Add a check for this (in practice plane 0, since the plane 0 offset must be 0).
v2:
- Fix WARN check for alignment=0.
--- drivers/gpu/drm/i915/display/intel_display.c | 22 +++++++++++++------- 1 file changed, 14 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +14 -8
@@ -2194,6 +2194,7 @@ intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb,return ERR_PTR (-EINVAL ); alignment =intel_surf_alignment (fb,0 ); +WARN_ON (alignment && !is_power_of_2 (alignment));/* Note that the w/a also requires 64 PTE of padding following the * bo. We currently fill all unused PTE with the shadow page and so
@@ -2432,9 +2433,6 @@ static u32 intel_compute_aligned_offset(struct drm_i915_private *dev_priv,unsigned int cpp = fb->format->cpp[color_plane];u32 offset, offset_aligned; -if (alignment) - alignment--; -if (!is_surface_linear (fb, color_plane)) {unsigned int tile_size, tile_width, tile_height;unsigned int tile_rows, tiles, pitch_tiles;
@@ -2456,17 +2454,24 @@ static u32 intel_compute_aligned_offset(struct drm_i915_private *dev_priv, *x %= tile_width; offset = (tile_rows * pitch_tiles + tiles) * tile_size; - offset_aligned = offset & ~alignment; + + offset_aligned = offset; +if (alignment) + offset_aligned =rounddown (offset_aligned, alignment);intel_adjust_tile_offset (x, y, tile_width, tile_height, tile_size, pitch_tiles, offset, offset_aligned); }else { offset = *y * pitch + *x * cpp; - offset_aligned = offset & ~alignment; - - *y = (offset & alignment) / pitch; - *x = ((offset & alignment) - *y * pitch) / cpp; + offset_aligned = offset; +if (alignment) { + offset_aligned =rounddown (offset_aligned, alignment); + *y = (offset % alignment) / pitch; + *x = ((offset % alignment) - *y * pitch) / cpp; + }else { + *y = *x =0 ; + } }return offset_aligned;
@@ -3738,6 +3743,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)intel_add_fb_offsets (&x, &y, plane_state,0 ); offset =intel_plane_compute_aligned_offset (&x, &y, plane_state,0 ); alignment =intel_surf_alignment (fb,0 ); +WARN_ON (alignment && !is_power_of_2 (alignment));/* * AUX surface offset is specified as the distance from the
Signature · 6 lines
2.23.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [v2,1/3] drm/i915: Add support for non-power-of-2 FB plane alignment (rev2)
In reply to Imre Deak== Series Details ==
== Series Details ==
Series: series starting with [v2,1/3] drm/i915: Add support for non-power-of-2 FB plane alignment (rev2)
URL : https://patchwork.freedesktop.org/series/71444/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_7644 -> Patchwork_15935
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/index.html
Known issues
------------
Here are the changes found in Patchwork_15935 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_tiled_blits@basic:
- fi-byt-n2820: [PASS][1] -> [FAIL][2] ([i915#832])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-byt-n2820/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/fi-byt-n2820/igt@[email protected]
* igt@i915_module_load@reload-with-fault-injection:
- fi-skl-6700k2: [PASS][3] -> [INCOMPLETE][4] ([i915#671])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-skl-6700k2/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/fi-skl-6700k2/igt@[email protected]
* igt@i915_selftest@live_blt:
- fi-ivb-3770: [PASS][5] -> [DMESG-FAIL][6] ([i915#725])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-ivb-3770/igt@i915_selftest@live_blt.html
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/fi-ivb-3770/igt@i915_selftest@live_blt.html
#### Possible fixes ####
* igt@i915_module_load@reload-with-fault-injection:
- fi-skl-lmem: [INCOMPLETE][7] ([i915#671]) -> [PASS][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-skl-lmem/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/fi-skl-lmem/igt@[email protected]
#### Warnings ####
* igt@i915_module_load@reload-with-fault-injection:
- fi-bxt-dsi: [DMESG-WARN][9] ([i915#889]) -> [INCOMPLETE][10] ([fdo#103927])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-bxt-dsi/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/fi-bxt-dsi/igt@[email protected]
* igt@kms_flip@basic-flip-vs-modeset:
- fi-kbl-x1275: [DMESG-WARN][11] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][12] ([i915#62] / [i915#92]) +3 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-kbl-x1275/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/fi-kbl-x1275/igt@[email protected]
* igt@kms_force_connector_basic@force-edid:
- fi-kbl-x1275: [DMESG-WARN][13] ([i915#62] / [i915#92]) -> [DMESG-WARN][14] ([i915#62] / [i915#92] / [i915#95]) +5 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/fi-kbl-x1275/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/fi-kbl-x1275/igt@[email protected]
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62
[i915#671]: https://gitlab.freedesktop.org/drm/intel/issues/671
[i915#725]: https://gitlab.freedesktop.org/drm/intel/issues/725
[i915#832]: https://gitlab.freedesktop.org/drm/intel/issues/832
[i915#889]: https://gitlab.freedesktop.org/drm/intel/issues/889
[i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (42 -> 43)
------------------------------
Additional (8): fi-byt-j1900 fi-hsw-peppy fi-ilk-650 fi-gdg-551 fi-kbl-8809g fi-blb-e6850 fi-kbl-r fi-snb-2600
Missing (7): fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-bdw-samus fi-byt-clapper fi-skl-6600u
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_7644 -> Patchwork_15935
CI-20190529: 20190529
CI_DRM_7644: 103086964d18ac22a8e333b9ea7649f67c468f7b @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5352: 0586d205f651674e575351c2d5a7d0760716c9f1 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_15935: 0da4bd71dd5acb05648abadf42113d8d9cbaaf38 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
0da4bd71dd5a drm/i915: Add debug message for FB plane[0].offset!=0 error 7a13dc270b8a drm/i915/tgl: Make sure a semiplanar UV plane is tile row size aligned 58f02cd86f46 drm/i915: Add support for non-power-of-2 FB plane alignment
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI[Intel-gfx] ✓ Fi.CI.IGT: success for series starting with [v2,1/3] drm/i915: Add support for non-power-of-2 FB plane alignment (rev2)
In reply to Imre Deak== Series Details ==
== Series Details ==
Series: series starting with [v2,1/3] drm/i915: Add support for non-power-of-2 FB plane alignment (rev2)
URL : https://patchwork.freedesktop.org/series/71444/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_7644_full -> Patchwork_15935_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Known issues
------------
Here are the changes found in Patchwork_15935_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_ctx_isolation@vcs1-none:
- shard-iclb: [PASS][1] -> [SKIP][2] ([fdo#109276] / [fdo#112080]) +1 similar issue
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb4/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb5/igt@[email protected]
* igt@gem_ctx_persistence@vecs0-mixed-process:
- shard-apl: [PASS][3] -> [FAIL][4] ([i915#679])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-apl2/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-apl8/igt@[email protected]
* igt@gem_exec_balancer@smoke:
- shard-iclb: [PASS][5] -> [SKIP][6] ([fdo#110854])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb2/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb7/igt@[email protected]
* igt@gem_exec_schedule@preempt-queue-bsd1:
- shard-iclb: [PASS][7] -> [SKIP][8] ([fdo#109276]) +10 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb2/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb7/igt@[email protected]
* igt@gem_exec_schedule@reorder-wide-bsd:
- shard-iclb: [PASS][9] -> [SKIP][10] ([fdo#112146]) +8 similar issues
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb6/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb2/igt@[email protected]
* igt@i915_pm_dc@dc6-psr:
- shard-iclb: [PASS][11] -> [FAIL][12] ([i915#454])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb5/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb2/igt@[email protected]
* igt@i915_pm_rpm@system-suspend-modeset:
- shard-skl: [PASS][13] -> [INCOMPLETE][14] ([i915#151] / [i915#69])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-skl8/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-skl3/igt@[email protected]
* igt@kms_cursor_crc@pipe-a-cursor-64x64-onscreen:
- shard-skl: [PASS][15] -> [FAIL][16] ([i915#54]) +1 similar issue
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-skl1/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-skl4/igt@[email protected]
* igt@kms_cursor_crc@pipe-a-cursor-suspend:
- shard-apl: [PASS][17] -> [DMESG-WARN][18] ([i915#180])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-apl3/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-apl8/igt@[email protected]
* igt@kms_cursor_legacy@all-pipes-torture-move:
- shard-glk: [PASS][19] -> [DMESG-WARN][20] ([i915#128])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-glk2/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-glk6/igt@[email protected]
* igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions:
- shard-skl: [PASS][21] -> [FAIL][22] ([IGT#5])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-skl1/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-skl4/igt@[email protected]
* igt@kms_plane@pixel-format-pipe-c-planes:
- shard-skl: [PASS][23] -> [DMESG-WARN][24] ([i915#109])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-skl2/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-skl8/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min:
- shard-skl: [PASS][25] -> [FAIL][26] ([fdo#108145]) +1 similar issue
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-skl5/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-skl6/igt@[email protected]
* igt@kms_psr@psr2_sprite_mmap_gtt:
- shard-iclb: [PASS][27] -> [SKIP][28] ([fdo#109441]) +2 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb2/igt@kms_psr@psr2_sprite_mmap_gtt.html
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb3/igt@kms_psr@psr2_sprite_mmap_gtt.html
* igt@perf_pmu@init-busy-vcs1:
- shard-iclb: [PASS][29] -> [SKIP][30] ([fdo#112080]) +7 similar issues
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb2/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb5/igt@[email protected]
#### Possible fixes ####
* igt@gem_ctx_persistence@bcs0-mixed-process:
- shard-apl: [FAIL][31] ([i915#679]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-apl6/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-apl7/igt@[email protected]
* igt@gem_ctx_persistence@rcs0-mixed-process:
- shard-skl: [FAIL][33] ([i915#679]) -> [PASS][34] +1 similar issue
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-skl1/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-skl4/igt@[email protected]
* igt@gem_ctx_persistence@vcs1-mixed-process:
- shard-iclb: [SKIP][35] ([fdo#109276] / [fdo#112080]) -> [PASS][36] +3 similar issues
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb8/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb1/igt@[email protected]
* igt@gem_eio@kms:
- shard-glk: [INCOMPLETE][37] ([i915#58] / [k.org#198133]) -> [PASS][38]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-glk2/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-glk9/igt@[email protected]
* igt@gem_eio@reset-stress:
- shard-snb: [FAIL][39] ([i915#232]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-snb7/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-snb6/igt@[email protected]
* igt@gem_exec_schedule@in-order-bsd:
- shard-iclb: [SKIP][41] ([fdo#112146]) -> [PASS][42] +4 similar issues
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb4/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb8/igt@[email protected]
* igt@gem_persistent_relocs@forked-interruptible-faulting-reloc-thrash-inactive:
- shard-apl: [TIMEOUT][43] ([i915#530]) -> [PASS][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-apl3/igt@gem_persistent_relocs@forked-interruptible-faulting-reloc-thrash-inactive.html
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-apl6/igt@gem_persistent_relocs@forked-interruptible-faulting-reloc-thrash-inactive.html
* igt@kms_cursor_crc@pipe-b-cursor-256x85-sliding:
- shard-skl: [FAIL][45] ([i915#54]) -> [PASS][46] +2 similar issues
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-skl7/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-skl2/igt@[email protected]
* igt@kms_flip@2x-flip-vs-expired-vblank-interruptible:
- shard-glk: [FAIL][47] ([i915#79]) -> [PASS][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-glk1/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-glk2/igt@[email protected]
* igt@kms_flip@flip-vs-suspend-interruptible:
- shard-kbl: [DMESG-WARN][49] ([i915#180]) -> [PASS][50] +3 similar issues
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-kbl6/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-kbl2/igt@[email protected]
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-b-planes:
- shard-apl: [DMESG-WARN][51] ([i915#180]) -> [PASS][52] +3 similar issues
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-apl1/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-apl2/igt@[email protected]
* igt@kms_psr@psr2_cursor_plane_move:
- shard-iclb: [SKIP][53] ([fdo#109441]) -> [PASS][54] +2 similar issues
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb6/igt@kms_psr@psr2_cursor_plane_move.html
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb2/igt@kms_psr@psr2_cursor_plane_move.html
* igt@perf_pmu@busy-accuracy-2-vcs1:
- shard-iclb: [SKIP][55] ([fdo#112080]) -> [PASS][56] +13 similar issues
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb8/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb4/igt@[email protected]
* igt@prime_busy@hang-bsd2:
- shard-iclb: [SKIP][57] ([fdo#109276]) -> [PASS][58] +24 similar issues
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb6/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb4/igt@[email protected]
#### Warnings ####
* igt@gem_ctx_isolation@vcs1-nonpriv:
- shard-iclb: [FAIL][59] ([IGT#28]) -> [SKIP][60] ([fdo#109276] / [fdo#112080])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb2/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb3/igt@[email protected]
* igt@gem_ctx_isolation@vcs1-nonpriv-switch:
- shard-iclb: [SKIP][61] ([fdo#109276] / [fdo#112080]) -> [FAIL][62] ([IGT#28])
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-iclb6/igt@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-iclb4/igt@[email protected]
* igt@gem_tiled_blits@interruptible:
- shard-hsw: [FAIL][63] ([i915#832]) -> [FAIL][64] ([i915#818])
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7644/shard-hsw8/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/shard-hsw1/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[IGT#28]: https://gitlab.freedesktop.org/drm/igt-gpu-tools/issues/28
[IGT#5]: https://gitlab.freedesktop.org/drm/igt-gpu-tools/issues/5
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#110854]: https://bugs.freedesktop.org/show_bug.cgi?id=110854
[fdo#112080]: https://bugs.freedesktop.org/show_bug.cgi?id=112080
[fdo#112146]: https://bugs.freedesktop.org/show_bug.cgi?id=112146
[i915#109]: https://gitlab.freedesktop.org/drm/intel/issues/109
[i915#128]: https://gitlab.freedesktop.org/drm/intel/issues/128
[i915#151]: https://gitlab.freedesktop.org/drm/intel/issues/151
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#232]: https://gitlab.freedesktop.org/drm/intel/issues/232
[i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
[i915#530]: https://gitlab.freedesktop.org/drm/intel/issues/530
[i915#54]: https://gitlab.freedesktop.org/drm/intel/issues/54
[i915#58]: https://gitlab.freedesktop.org/drm/intel/issues/58
[i915#677]: https://gitlab.freedesktop.org/drm/intel/issues/677
[i915#679]: https://gitlab.freedesktop.org/drm/intel/issues/679
[i915#69]: https://gitlab.freedesktop.org/drm/intel/issues/69
[i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
[i915#818]: https://gitlab.freedesktop.org/drm/intel/issues/818
[i915#832]: https://gitlab.freedesktop.org/drm/intel/issues/832
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133
Participating hosts (10 -> 10)
------------------------------
No changes in participating hosts
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_7644 -> Patchwork_15935
CI-20190529: 20190529
CI_DRM_7644: 103086964d18ac22a8e333b9ea7649f67c468f7b @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5352: 0586d205f651674e575351c2d5a7d0760716c9f1 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_15935: 0da4bd71dd5acb05648abadf42113d8d9cbaaf38 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_15935/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoting Imre Deak (2019-12-27 23:51:45)
Quoted 4 lines
At least one framebuffer plane on TGL - the UV plane of YUV semiplanar FBs - requires a non-power-of-2 alignment, so add support for this. This new alignment restriction applies only to an offset within an FB, so the GEM buffer itself containing the FB must still be power-of-2 aligned.
It's worth talking about virtual memory alignment (in the GGTT) here and not the physical alignment of the backing store. The buffer itself plays no part here.
Quoted 15 lines
Add a check for this (in practice plane 0, since the plane 0 offset must be 0).
Cc Chris Wilson <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Imre Deak <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 22 +++++++++++++------- 1 file changed, 14 insertions(+), 8 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0
drivers/gpu/drm/i915/display/intel_display.c intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb, · line 2197
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-0@@ -2194,6 +2194,7 @@ intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb,return ERR_PTR (-EINVAL ); alignment =intel_surf_alignment (fb,0 ); +WARN_ON (!is_power_of_2 (alignment));
Handle the error, if you are going to the trouble to warn, add the return as well.
Quoted 44 lines
drivers/gpu/drm/i915/display/intel_display.c +12
-8/* Note that the w/a also requires 64 PTE of padding following the * bo. We currently fill all unused PTE with the shadow page and so @@ -2432,9 +2433,6 @@ static u32 intel_compute_aligned_offset(struct drm_i915_private *dev_priv,unsigned int cpp = fb->format->cpp[color_plane];u32 offset, offset_aligned; -if (alignment) - alignment--; -if (!is_surface_linear (fb, color_plane)) {unsigned int tile_size, tile_width, tile_height;unsigned int tile_rows, tiles, pitch_tiles;@@ -2456,17 +2454,24 @@ static u32 intel_compute_aligned_offset(struct drm_i915_private *dev_priv, *x %= tile_width; offset = (tile_rows * pitch_tiles + tiles) * tile_size; - offset_aligned = offset & ~alignment; + + offset_aligned = offset; +if (alignment) + offset_aligned =rounddown (offset_aligned, alignment);intel_adjust_tile_offset (x, y, tile_width, tile_height, tile_size, pitch_tiles, offset, offset_aligned); }else { offset = *y * pitch + *x * cpp; - offset_aligned = offset & ~alignment; - - *y = (offset & alignment) / pitch; - *x = ((offset & alignment) - *y * pitch) / cpp; + offset_aligned = offset; +if (alignment) { + offset_aligned =rounddown (offset_aligned, alignment); + *y = (offset % alignment) / pitch; + *x = ((offset % alignment) - *y * pitch) / cpp; + }else { + *y = *x =0 ; + } }return offset_aligned;
drivers/gpu/drm/i915/display/intel_display.c static int skl_check_main_surface(struct intel_plane_state *plane_state) · line 3746
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-0@@ -3738,6 +3743,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)intel_add_fb_offsets (&x, &y, plane_state,0 ); offset =intel_plane_compute_aligned_offset (&x, &y, plane_state,0 ); alignment =intel_surf_alignment (fb,0 ); +WARN_ON (!is_power_of_2 (alignment));
The other two are expected to handle !is_pot...
I would strongly suggest handling the WARNs, or else you may as well bug out for the programming error.
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 9 lines · Chris Wilson
Quoting Imre Deak (2019-12-27 23:51:45)
Quoted 4 lines
At least one framebuffer plane on TGL - the UV plane of YUV semiplanar FBs - requires a non-power-of-2 alignment, so add support for this. This new alignment restriction applies only to an offset within an FB, so the GEM buffer itself containing the FB must still be power-of-2 aligned.
It's worth talking about virtual memory alignment (in the GGTT) here and not the physical alignment of the backing store. The buffer itself plays no part here.
Yes, this new restriction is about the GGTT mapping and display specific. In fact other engines have other restrictions when reading/writing the same YUV surfaces - for instance via a PPGTT map. And yes, the page physical addresses can be anything.
Will improve the commit log.
Quoted 17 lines
Quoted 17 lines
Add a check for this (in practice plane 0, since the plane 0 offset must be 0).
Cc Chris Wilson <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Imre Deak <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 22 +++++++++++++------- 1 file changed, 14 insertions(+), 8 deletions(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0@@ -2194,6 +2194,7 @@ intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb,return ERR_PTR (-EINVAL );
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display.c intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb, · line 2197
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-0alignment =intel_surf_alignment (fb,0 ); +WARN_ON (!is_power_of_2 (alignment));Handle the error, if you are going to the trouble to warn, add the return as well.
Ok.
Quoted 42 lines
Quoted 42 lines
drivers/gpu/drm/i915/display/intel_display.c +12
-8/* Note that the w/a also requires 64 PTE of padding following the * bo. We currently fill all unused PTE with the shadow page and so @@ -2432,9 +2433,6 @@ static u32 intel_compute_aligned_offset(struct drm_i915_private *dev_priv,unsigned int cpp = fb->format->cpp[color_plane];u32 offset, offset_aligned; -if (alignment) - alignment--; -if (!is_surface_linear (fb, color_plane)) {unsigned int tile_size, tile_width, tile_height;unsigned int tile_rows, tiles, pitch_tiles;@@ -2456,17 +2454,24 @@ static u32 intel_compute_aligned_offset(struct drm_i915_private *dev_priv, *x %= tile_width; offset = (tile_rows * pitch_tiles + tiles) * tile_size; - offset_aligned = offset & ~alignment; + + offset_aligned = offset; +if (alignment) + offset_aligned =rounddown (offset_aligned, alignment);intel_adjust_tile_offset (x, y, tile_width, tile_height, tile_size, pitch_tiles, offset, offset_aligned); }else { offset = *y * pitch + *x * cpp; - offset_aligned = offset & ~alignment; - - *y = (offset & alignment) / pitch; - *x = ((offset & alignment) - *y * pitch) / cpp; + offset_aligned = offset; +if (alignment) { + offset_aligned =rounddown (offset_aligned, alignment); + *y = (offset % alignment) / pitch; + *x = ((offset % alignment) - *y * pitch) / cpp; + }else { + *y = *x =0 ; + } }
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c static int skl_check_main_surface(struct intel_plane_state *plane_state) · line 3746
Quoted 6 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-0return offset_aligned;@@ -3738,6 +3743,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)intel_add_fb_offsets (&x, &y, plane_state,0 ); offset =intel_plane_compute_aligned_offset (&x, &y, plane_state,0 ); alignment =intel_surf_alignment (fb,0 ); +WARN_ON (!is_power_of_2 (alignment));The other two are expected to handle !is_pot...
Not sure what the alignment of the address we write to the main surface address register should be, the spec doesn't say anything about that. I assume now that not wrapping around the right edge of the detiler fence we add is enough (which is also checked in intel_fill_fb_info()).
Quoted 2 lines
I would strongly suggest handling the WARNs, or else you may as well bug out for the programming error.
Ok, will change those.
Quoted 2 lines
Reviewed-by Chris Wilson <[email protected]>-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx