mach-imx: bootaux: print stack pointer and reset vector
Subsystems (3)
PATCH v2 1/3 mach-imx: bootaux: print stack pointer and reset vector
From: Igor Opaniuk <[email protected]>
1. Change information printed about loaded M4 binary, print the stack pointer and reset vector addressed.
2. Add sanity check for the address provided as param.
---
arch/arm/mach-imx/imx_bootaux.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
arch/arm/mach-imx/imx_bootaux.c +5 -1
@@ -20,6 +20,9 @@ int arch_auxiliary_core_up(u32 core_id, ulong boot_private_data) stack = *(u32 *)boot_private_data; pc = *(u32 *)(boot_private_data +4 ); +printf ("## Starting auxiliary core stack = 0x%08lX, pc = 0x%08lX...\n" , + stack, pc); +/* Set the stack and pc to M4 bootROM */ writel (stack,M4_BOOTROM_BASE_ADDR );writel (pc,M4_BOOTROM_BASE_ADDR +4 );
@@ -80,7 +83,8 @@ static int do_bootaux(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) addr =simple_strtoul (argv[1 ],NULL ,16 ); -printf ("## Starting auxiliary core at 0x%08lX ...\n" , addr); +if (!addr) +return CMD_RET_FAILURE ; ret =arch_auxiliary_core_up (0 , addr);if (ret)
Signature · 1 line
2.17.1
PATCH v2 2/3 mach-imx: bootaux: add dcache flushing before enabling M4
From: Igor Opaniuk <[email protected]>
This patch fixes the issue with broken bootaux command, when M4 binary is loaded and data cache isn't flushed before M4 core is enabled.
Reproducing:
Quoted 3 lines
tftpboot ${loadaddr} ${board_name}/hello_world.bin cp.b ${loadaddr}
0x7F8000$filesize bootaux0x7F8000
---
arch/arm/mach-imx/imx_bootaux.c | 2 ++ 1 file changed, 2 insertions(+)
arch/arm/mach-imx/imx_bootaux.c +2 -0
@@ -27,6 +27,8 @@ int arch_auxiliary_core_up(u32 core_id, ulong boot_private_data)writel (stack,M4_BOOTROM_BASE_ADDR );writel (pc,M4_BOOTROM_BASE_ADDR +4 ); +flush_dcache_all (); +/* Enable M4 */ #ifdef CONFIG_IMX8M call_imx_sip (IMX_SIP_SRC ,IMX_SIP_SRC_M4_START ,0 ,0 ,0 );
Signature · 1 line
2.17.1
PATCH v2 2/3 mach-imx: bootaux: add dcache flushing before enabling M4
Quoted 7 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
This patch fixes the issue with broken bootaux command, when M4 binary is loaded and data cache isn't flushed before M4 core is enabled.
Quoted 6 lines
Reproducing:
Quoted 3 lines
tftpboot ${loadaddr} ${board_name}/hello_world.bin cp.b ${loadaddr}
0x7F8000$filesize bootaux0x7F8000Signed-off-by Igor Opaniuk <[email protected]>
Quoted 25 lines
---
arch/arm/mach-imx/imx_bootaux.c | 2 ++ 1 file changed, 2 insertions(+)arch/arm/mach-imx/imx_bootaux.c +2
-1@@ -27,6 +27,8 @@ int arch_auxiliary_core_up(u32 core_id, ulong boot_private_data)writel (stack,M4_BOOTROM_BASE_ADDR );writel (pc,M4_BOOTROM_BASE_ADDR +4 ); +flush_dcache_all (); +/* Enable M4 */ #ifdef CONFIG_IMX8M call_imx_sip (IMX_SIP_SRC ,IMX_SIP_SRC_M4_START ,0 ,0 ,0 ); --2.17.1
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
Signature · 6 lines
Best regards Oleksandr Suvorov Toradex AG Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500 4800 (main line)
PATCH v2 2/3 mach-imx: bootaux: add dcache flushing before enabling M4
In reply to Igor OpaniukQuoted 10 lines
From: Igor Opaniuk <[email protected]> This patch fixes the issue with broken bootaux command, when M4 binary is loaded and data cache isn't flushed before M4 core is enabled.
Reproducing:Quoted 3 lines
tftpboot ${loadaddr} ${board_name}/hello_world.bin cp.b ${loadaddr}
0x7F8000$filesize bootaux0x7F8000Signed-off-by Igor Opaniuk <[email protected]>Reviewed-by Oleksandr Suvorov <[email protected]>
Applied to u-boot-imx, -next, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 3/3 mach-imx: bootaux: elf firmware support
In reply to Igor OpaniukFrom: Igor Opaniuk <[email protected]>
Currently imx-specific bootaux command doesn't support ELF format firmware for Cortex-M4 core.
This patches introduces a PoC implementation of handling elf firmware (load_elf_image_phdr() was copy-pasted from elf.c just for PoC).
This has the advantage that the user does not need to know to which address the binary has been linked to. However, in order to handle and load the elf sections to the right address, we need to translate the Cortex-M4 core memory addresses to primary/host CPU memory addresses (Cortex A7/A9 cores).
This allows to boot firmwares from any location with just using bootaux, e.g.:
Quoted 1 line
tftp ${loadaddr} hello_world.elf && bootaux ${loadaddr}
Similar translation table can be found in the Linux remoteproc driver [1].
[1] https://elixir.bootlin.com/linux/latest/source/drivers/remoteproc/imx_rproc.c
---
arch/arm/include/asm/mach-imx/sys_proto.h | 7 ++ arch/arm/mach-imx/imx_bootaux.c | 84 +++++++++++++++++++++-- arch/arm/mach-imx/mx7/soc.c | 28 ++++++++ 3 files changed, 115 insertions(+), 4 deletions(-)
arch/arm/include/asm/mach-imx/sys_proto.h +7 -0
@@ -104,6 +104,13 @@ void gpr_init(void);#endif /* CONFIG_MX6 */ +/* address translation table */ +struct rproc_att { +u32 da;/* device address (From Cortex M4 view) */ +u32 sa;/* system bus address */ +u32 size;/* size of reg range */ +}; +u32 get_nr_cpus (void );u32 get_cpu_rev (void );u32 get_cpu_speed_grade_hz (void );
arch/arm/mach-imx/imx_bootaux.c +80 -4
98 lines not on this page · raw message
arch/arm/mach-imx/mx7/soc.c +28 -0
@@ -193,6 +193,34 @@ static void init_cpu_basic(void)#endif } +#ifdef CONFIG_IMX_BOOTAUX +/* +* Table of mappings of physical mem regions in both +* Cortex-A7 and Cortex-M4 address spaces. +* +* For additional details check sections 2.1.2 and 2.1.3 in +* i.MX7Dual Applications Processor Reference Manual +* +*/ +const struct rproc_att hostmap[] = { +/* aux core , host core, size */ + {0x00000000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x00180000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x20180000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x1fff8000 ,0x007f8000 ,0x8000 },/* TCML */ + {0x20000000 ,0x00800000 ,0x8000 },/* TCMU */ + {0x00900000 ,0x00900000 ,0x20000 },/* OCRAM_128KB */ + {0x20200000 ,0x00900000 ,0x20000 },/* OCRAM_128KB */ + {0x00920000 ,0x00920000 ,0x20000 },/* OCRAM_EPDC */ + {0x20220000 ,0x00920000 ,0x20000 },/* OCRAM_EPDC */ + {0x00940000 ,0x00940000 ,0x20000 },/* OCRAM_PXP */ + {0x20240000 ,0x00940000 ,0x20000 },/* OCRAM_PXP */ + {0x10000000 ,0x80000000 ,0x0fff0000 },/* DDR Code alias */ + {0x80000000 ,0x80000000 ,0xe0000000 },/* DDRC */ + {/* sentinel */ } +}; +#endif +#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* enable all periherial can be accessed in nosec mode */ static void init_csu (void )
Signature · 1 line
2.17.1
PATCH v2 3/3 mach-imx: bootaux: elf firmware support
Quoted 19 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Currently imx-specific bootaux command doesn't support ELF format firmware for Cortex-M4 core.
This patches introduces a PoC implementation of handling elf firmware (
load_elf_image_phdr()was copy-pasted fromelf.cjust for PoC).This has the advantage that the user does not need to know to which address the binary has been linked to. However, in order to handle and load the elf sections to the right address, we need to translate the Cortex-M4 core memory addresses to primary/host CPU memory addresses (Cortex A7/A9 cores).
This allows to boot firmwares from any location with just using bootaux, e.g.:
Quoted 1 line
tftp ${loadaddr} hello_world.elf && bootaux ${loadaddr}
Quoted 7 lines
Similar translation table can be found in the Linux remoteproc driver [1].
[1] https://elixir.bootlin.com/linux/latest/source/drivers/remoteproc/imx_rproc.c
Signed-off-by Igor Opaniuk <[email protected]>Signed-off-by Stefan Agner <[email protected]>
Quoted 174 lines
---
arch/arm/include/asm/mach-imx/sys_proto.h | 7 ++ arch/arm/mach-imx/imx_bootaux.c | 84 +++++++++++++++++++++-- arch/arm/mach-imx/mx7/soc.c | 28 ++++++++ 3 files changed, 115 insertions(+), 4 deletions(-)arch/arm/include/asm/mach-imx/sys_proto.h +7
-0@@ -104,6 +104,13 @@ void gpr_init(void);#endif /* CONFIG_MX6 */ +/* address translation table */ +struct rproc_att { +u32 da;/* device address (From Cortex M4 view) */ +u32 sa;/* system bus address */ +u32 size;/* size of reg range */ +}; +u32 get_nr_cpus (void );u32 get_cpu_rev (void );u32 get_cpu_speed_grade_hz (void );arch/arm/mach-imx/imx_bootaux.c +80
-4@@ -7,18 +7,94 @@#include <asm/io.h> #include <asm/mach-imx/sys_proto.h> #include <command.h> +#include <elf.h> #include <imx_sip.h> #include <linux/compiler.h> -int arch_auxiliary_core_up (u32 core_id,ulong boot_private_data) +const __weak struct rproc_att hostmap[] = { }; + +static const struct rproc_att *get_host_mapping (unsigned long auxcore) +{ +const struct rproc_att *mmap = hostmap; + +while (mmap && mmap->size) { +if (mmap->da <= auxcore && + mmap->da + mmap->size > auxcore) +return mmap; + mmap++; + } + +return NULL ; +} + +/* +* A very simple elf loader, assumes the image is valid, returns the +* entry point address. +*/ +static unsigned long load_elf_image_phdr (unsigned long addr) +{ +Elf32_Ehdr *ehdr;/* ELF header structure pointer */ +Elf32_Phdr *phdr;/* Program header structure pointer */ +int i; + + ehdr = (Elf32_Ehdr *)addr; + phdr = (Elf32_Phdr *)(addr + ehdr->e_phoff); + +/* Load each program header */ +for (i =0 ; i < ehdr->e_phnum; ++i, ++phdr) { +const struct rproc_att *mmap =get_host_mapping (phdr->p_paddr); +void *dst, *src; + +if (phdr->p_type !=PT_LOAD ) +continue ; + +if (!mmap) { +printf ("Invalid aux core address: %08x" , + phdr->p_paddr); +return 0 ; + } + + dst = (void *)(phdr->p_paddr - mmap->da) + mmap->sa; + src = (void *)addr + phdr->p_offset; + +debug ("Loading phdr %i to 0x%p (%i bytes)\n" , + i, dst, phdr->p_filesz); + +if (phdr->p_filesz) +memcpy (dst, src, phdr->p_filesz); +if (phdr->p_filesz != phdr->p_memsz) +memset (dst + phdr->p_filesz,0x00 , + phdr->p_memsz - phdr->p_filesz); +flush_cache ((unsigned long )dst & + ~(CONFIG_SYS_CACHELINE_SIZE -1 ), +ALIGN (phdr->p_filesz,CONFIG_SYS_CACHELINE_SIZE )); + } + +return ehdr->e_entry; +} + +int arch_auxiliary_core_up (u32 core_id,ulong addr) {ulong stack, pc; -if (!boot_private_data) +if (!addr)return -EINVAL ; - stack = *(u32 *)boot_private_data; - pc = *(u32 *)(boot_private_data +4 ); +if (valid_elf_image (addr)) { + stack =0x0 ; + pc =load_elf_image_phdr (addr); +if (!pc) +return CMD_RET_FAILURE ; + + }else { +/* +* Assume binary file with vector table at the beginning. +* Cortex-M4 vector tables start with the stack pointer (SP) +* and reset vector (initial PC). +*/ + stack = *(u32 *)addr; + pc = *(u32 *)(addr +4 ); + }printf ("## Starting auxiliary core stack = 0x%08lX, pc = 0x%08lX...\n" , stack, pc);arch/arm/mach-imx/mx7/soc.c +28
-1@@ -193,6 +193,34 @@ static void init_cpu_basic(void)#endif } +#ifdef CONFIG_IMX_BOOTAUX +/* +* Table of mappings of physical mem regions in both +* Cortex-A7 and Cortex-M4 address spaces. +* +* For additional details check sections 2.1.2 and 2.1.3 in +* i.MX7Dual Applications Processor Reference Manual +* +*/ +const struct rproc_att hostmap[] = { +/* aux core , host core, size */ + {0x00000000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x00180000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x20180000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x1fff8000 ,0x007f8000 ,0x8000 },/* TCML */ + {0x20000000 ,0x00800000 ,0x8000 },/* TCMU */ + {0x00900000 ,0x00900000 ,0x20000 },/* OCRAM_128KB */ + {0x20200000 ,0x00900000 ,0x20000 },/* OCRAM_128KB */ + {0x00920000 ,0x00920000 ,0x20000 },/* OCRAM_EPDC */ + {0x20220000 ,0x00920000 ,0x20000 },/* OCRAM_EPDC */ + {0x00940000 ,0x00940000 ,0x20000 },/* OCRAM_PXP */ + {0x20240000 ,0x00940000 ,0x20000 },/* OCRAM_PXP */ + {0x10000000 ,0x80000000 ,0x0fff0000 },/* DDR Code alias */ + {0x80000000 ,0x80000000 ,0xe0000000 },/* DDRC */ + {/* sentinel */ } +}; +#endif +#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* enable all periherial can be accessed in nosec mode */ static void init_csu (void ) --2.17.1
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
Signature · 6 lines
Best regards Oleksandr Suvorov Toradex AG Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500 4800 (main line)
PATCH v2 3/3 mach-imx: bootaux: elf firmware support
In reply to Igor OpaniukQuoted 111 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Currently imx-specific bootaux command doesn't support ELF format firmware for Cortex-M4 core.
This patches introduces a PoC implementation of handling elf firmware (
load_elf_image_phdr()was copy-pasted fromelf.cjust for PoC).This has the advantage that the user does not need to know to which address the binary has been linked to. However, in order to handle and load the elf sections to the right address, we need to translate the Cortex-M4 core memory addresses to primary/host CPU memory addresses (Cortex A7/A9 cores).
This allows to boot firmwares from any location with just using bootaux, e.g.:
Quoted 1 line
tftp ${loadaddr} hello_world.elf && bootaux ${loadaddr}
Similar translation table can be found in the Linux remoteproc driver [1].
[1] https://elixir.bootlin.com/linux/latest/source/drivers/remoteproc/imx_rproc.c
Signed-off-by Igor Opaniuk <[email protected]>Signed-off-by Stefan Agner <[email protected]>---
arch/arm/include/asm/mach-imx/sys_proto.h | 7 ++ arch/arm/mach-imx/imx_bootaux.c | 84 +++++++++++++++++++++-- arch/arm/mach-imx/mx7/soc.c | 28 ++++++++ 3 files changed, 115 insertions(+), 4 deletions(-)arch/arm/include/asm/mach-imx/sys_proto.h +7
-0@@ -104,6 +104,13 @@ void gpr_init(void);#endif /* CONFIG_MX6 */ +/* address translation table */ +struct rproc_att { +u32 da;/* device address (From Cortex M4 view) */ +u32 sa;/* system bus address */ +u32 size;/* size of reg range */ +}; +u32 get_nr_cpus (void );u32 get_cpu_rev (void );u32 get_cpu_speed_grade_hz (void );arch/arm/mach-imx/imx_bootaux.c +49
-1@@ -7,18 +7,94 @@#include <asm/io.h> #include <asm/mach-imx/sys_proto.h> #include <command.h> +#include <elf.h> #include <imx_sip.h> #include <linux/compiler.h> -int arch_auxiliary_core_up (u32 core_id,ulong boot_private_data) +const __weak struct rproc_att hostmap[] = { }; + +static const struct rproc_att *get_host_mapping (unsigned long auxcore) +{ +const struct rproc_att *mmap = hostmap; + +while (mmap && mmap->size) { +if (mmap->da <= auxcore && + mmap->da + mmap->size > auxcore) +return mmap; + mmap++; + } + +return NULL ; +} + +/* +* A very simple elf loader, assumes the image is valid, returns the +* entry point address. +*/ +static unsigned long load_elf_image_phdr (unsigned long addr) +{ +Elf32_Ehdr *ehdr;/* ELF header structure pointer */ +Elf32_Phdr *phdr;/* Program header structure pointer */ +int i; + + ehdr = (Elf32_Ehdr *)addr; + phdr = (Elf32_Phdr *)(addr + ehdr->e_phoff); + +/* Load each program header */ +for (i =0 ; i < ehdr->e_phnum; ++i, ++phdr) { +const struct rproc_att *mmap =get_host_mapping (phdr->p_paddr); +void *dst, *src; + +if (phdr->p_type !=PT_LOAD ) +continue ; + +if (!mmap) { +printf ("Invalid aux core address: %08x" , + phdr->p_paddr); +return 0 ; + } + + dst = (void *)(phdr->p_paddr - mmap->da) + mmap->sa; + src = (void *)addr + phdr->p_offset; + +debug ("Loading phdr %i to 0x%p (%i bytes)\n" , + i, dst, phdr->p_filesz);
arch/arm/mach-imx/imx_bootaux.c line 71
Quoted 10 lines
arch/arm/mach-imx/imx_bootaux.c +10
-0+ +if (phdr->p_filesz) +memcpy (dst, src, phdr->p_filesz); +if (phdr->p_filesz != phdr->p_memsz) +memset (dst + phdr->p_filesz,0x00 , + phdr->p_memsz - phdr->p_filesz); +flush_cache ((unsigned long )dst & + ~(CONFIG_SYS_CACHELINE_SIZE -1 ), +ALIGN (phdr->p_filesz,CONFIG_SYS_CACHELINE_SIZE )); + }
FYI: By merging the series I noted that prototype for flsuh_cache() and flush_dcache_all() is missing on some (mx7) architecture - adding :
(quoted diff) +0 -0
b/arch/arm/mach-imx/imx_bootaux.c
index 871169e771..d85102a434 100644
arch/arm/mach-imx/imx_bootaux.c +1 -0
@@ -10,6 +10,7 @@#include <elf.h> #include <imx_sip.h> #include <linux/compiler.h> +#include <cpu_func.h> const __weak struct rproc_att hostmap[] = { };
I add the missing include by myself, no need to repost.
Regards,
Stefano
Quoted 72 lines
arch/arm/mach-imx/imx_bootaux.c +21
-3+ +return ehdr->e_entry; +} + +int arch_auxiliary_core_up (u32 core_id,ulong addr) {ulong stack, pc; -if (!boot_private_data) +if (!addr)return -EINVAL ; - stack = *(u32 *)boot_private_data; - pc = *(u32 *)(boot_private_data +4 ); +if (valid_elf_image (addr)) { + stack =0x0 ; + pc =load_elf_image_phdr (addr); +if (!pc) +return CMD_RET_FAILURE ; + + }else { +/* +* Assume binary file with vector table at the beginning. +* Cortex-M4 vector tables start with the stack pointer (SP) +* and reset vector (initial PC). +*/ + stack = *(u32 *)addr; + pc = *(u32 *)(addr +4 ); + }printf ("## Starting auxiliary core stack = 0x%08lX, pc = 0x%08lX...\n" , stack, pc);arch/arm/mach-imx/mx7/soc.c +28
-0@@ -193,6 +193,34 @@ static void init_cpu_basic(void)#endif } +#ifdef CONFIG_IMX_BOOTAUX +/* +* Table of mappings of physical mem regions in both +* Cortex-A7 and Cortex-M4 address spaces. +* +* For additional details check sections 2.1.2 and 2.1.3 in +* i.MX7Dual Applications Processor Reference Manual +* +*/ +const struct rproc_att hostmap[] = { +/* aux core , host core, size */ + {0x00000000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x00180000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x20180000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x1fff8000 ,0x007f8000 ,0x8000 },/* TCML */ + {0x20000000 ,0x00800000 ,0x8000 },/* TCMU */ + {0x00900000 ,0x00900000 ,0x20000 },/* OCRAM_128KB */ + {0x20200000 ,0x00900000 ,0x20000 },/* OCRAM_128KB */ + {0x00920000 ,0x00920000 ,0x20000 },/* OCRAM_EPDC */ + {0x20220000 ,0x00920000 ,0x20000 },/* OCRAM_EPDC */ + {0x00940000 ,0x00940000 ,0x20000 },/* OCRAM_PXP */ + {0x20240000 ,0x00940000 ,0x20000 },/* OCRAM_PXP */ + {0x10000000 ,0x80000000 ,0x0fff0000 },/* DDR Code alias */ + {0x80000000 ,0x80000000 ,0xe0000000 },/* DDRC */ + {/* sentinel */ } +}; +#endif +#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* enable all periherial can be accessed in nosec mode */ static void init_csu (void )
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 3/3 mach-imx: bootaux: elf firmware support
In reply to Igor OpaniukQuoted 99 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Currently imx-specific bootaux command doesn't support ELF format firmware for Cortex-M4 core.
This patches introduces a PoC implementation of handling elf firmware (
load_elf_image_phdr()was copy-pasted fromelf.cjust for PoC).This has the advantage that the user does not need to know to which address the binary has been linked to. However, in order to handle and load the elf sections to the right address, we need to translate the Cortex-M4 core memory addresses to primary/host CPU memory addresses (Cortex A7/A9 cores).
This allows to boot firmwares from any location with just using bootaux, e.g.:
Quoted 1 line
tftp ${loadaddr} hello_world.elf && bootaux ${loadaddr}
Similar translation table can be found in the Linux remoteproc driver [1].
[1] https://elixir.bootlin.com/linux/latest/source/drivers/remoteproc/imx_rproc.c
Signed-off-by Igor Opaniuk <[email protected]>Signed-off-by Stefan Agner <[email protected]>---
arch/arm/include/asm/mach-imx/sys_proto.h | 7 ++ arch/arm/mach-imx/imx_bootaux.c | 84 +++++++++++++++++++++-- arch/arm/mach-imx/mx7/soc.c | 28 ++++++++ 3 files changed, 115 insertions(+), 4 deletions(-)arch/arm/include/asm/mach-imx/sys_proto.h +7
-0@@ -104,6 +104,13 @@ void gpr_init(void);#endif /* CONFIG_MX6 */ +/* address translation table */ +struct rproc_att { +u32 da;/* device address (From Cortex M4 view) */ +u32 sa;/* system bus address */ +u32 size;/* size of reg range */ +}; +u32 get_nr_cpus (void );u32 get_cpu_rev (void );u32 get_cpu_speed_grade_hz (void );arch/arm/mach-imx/imx_bootaux.c +37
-1@@ -7,18 +7,94 @@#include <asm/io.h> #include <asm/mach-imx/sys_proto.h> #include <command.h> +#include <elf.h> #include <imx_sip.h> #include <linux/compiler.h> -int arch_auxiliary_core_up (u32 core_id,ulong boot_private_data) +const __weak struct rproc_att hostmap[] = { }; + +static const struct rproc_att *get_host_mapping (unsigned long auxcore) +{ +const struct rproc_att *mmap = hostmap; + +while (mmap && mmap->size) { +if (mmap->da <= auxcore && + mmap->da + mmap->size > auxcore) +return mmap; + mmap++; + } + +return NULL ; +} + +/* +* A very simple elf loader, assumes the image is valid, returns the +* entry point address. +*/ +static unsigned long load_elf_image_phdr (unsigned long addr) +{ +Elf32_Ehdr *ehdr;/* ELF header structure pointer */ +Elf32_Phdr *phdr;/* Program header structure pointer */ +int i; + + ehdr = (Elf32_Ehdr *)addr; + phdr = (Elf32_Phdr *)(addr + ehdr->e_phoff); + +/* Load each program header */ +for (i =0 ; i < ehdr->e_phnum; ++i, ++phdr) { +const struct rproc_att *mmap =get_host_mapping (phdr->p_paddr); +void *dst, *src; + +if (phdr->p_type !=PT_LOAD ) +continue ;
arch/arm/mach-imx/imx_bootaux.c line 59
Quoted 10 lines
arch/arm/mach-imx/imx_bootaux.c +10
-0+ +if (!mmap) { +printf ("Invalid aux core address: %08x" , + phdr->p_paddr); +return 0 ; + } + + dst = (void *)(phdr->p_paddr - mmap->da) + mmap->sa; + src = (void *)addr + phdr->p_offset; +
This generates a warning on 64bit targets (like imx8mq_evk):
aarch64: w+ imx8mq_evk
+WARNING 'signed_hdmi_imx8m.bin' not found, resulting binary is not-functional
+ dst = (void *)(phdr->p_paddr) ;//- mmap->da + mmap->sa;
+ ^w+arch/arm/mach-imx/imx_bootaux.c: In function 'load_elf_image_phdr':w+arch/arm/mach-imx/imx_bootaux.c:58:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Can you take a look ? I merge 1/3 and 2/3, no need to repost the whole series - thanks !
Best regards,
Stefano
Quoted 84 lines
arch/arm/mach-imx/imx_bootaux.c +33
-3+debug ("Loading phdr %i to 0x%p (%i bytes)\n" , + i, dst, phdr->p_filesz); + +if (phdr->p_filesz) +memcpy (dst, src, phdr->p_filesz); +if (phdr->p_filesz != phdr->p_memsz) +memset (dst + phdr->p_filesz,0x00 , + phdr->p_memsz - phdr->p_filesz); +flush_cache ((unsigned long )dst & + ~(CONFIG_SYS_CACHELINE_SIZE -1 ), +ALIGN (phdr->p_filesz,CONFIG_SYS_CACHELINE_SIZE )); + } + +return ehdr->e_entry; +} + +int arch_auxiliary_core_up (u32 core_id,ulong addr) {ulong stack, pc; -if (!boot_private_data) +if (!addr)return -EINVAL ; - stack = *(u32 *)boot_private_data; - pc = *(u32 *)(boot_private_data +4 ); +if (valid_elf_image (addr)) { + stack =0x0 ; + pc =load_elf_image_phdr (addr); +if (!pc) +return CMD_RET_FAILURE ; + + }else { +/* +* Assume binary file with vector table at the beginning. +* Cortex-M4 vector tables start with the stack pointer (SP) +* and reset vector (initial PC). +*/ + stack = *(u32 *)addr; + pc = *(u32 *)(addr +4 ); + }printf ("## Starting auxiliary core stack = 0x%08lX, pc = 0x%08lX...\n" , stack, pc);arch/arm/mach-imx/mx7/soc.c +28
-0@@ -193,6 +193,34 @@ static void init_cpu_basic(void)#endif } +#ifdef CONFIG_IMX_BOOTAUX +/* +* Table of mappings of physical mem regions in both +* Cortex-A7 and Cortex-M4 address spaces. +* +* For additional details check sections 2.1.2 and 2.1.3 in +* i.MX7Dual Applications Processor Reference Manual +* +*/ +const struct rproc_att hostmap[] = { +/* aux core , host core, size */ + {0x00000000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x00180000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x20180000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x1fff8000 ,0x007f8000 ,0x8000 },/* TCML */ + {0x20000000 ,0x00800000 ,0x8000 },/* TCMU */ + {0x00900000 ,0x00900000 ,0x20000 },/* OCRAM_128KB */ + {0x20200000 ,0x00900000 ,0x20000 },/* OCRAM_128KB */ + {0x00920000 ,0x00920000 ,0x20000 },/* OCRAM_EPDC */ + {0x20220000 ,0x00920000 ,0x20000 },/* OCRAM_EPDC */ + {0x00940000 ,0x00940000 ,0x20000 },/* OCRAM_PXP */ + {0x20240000 ,0x00940000 ,0x20000 },/* OCRAM_PXP */ + {0x10000000 ,0x80000000 ,0x0fff0000 },/* DDR Code alias */ + {0x80000000 ,0x80000000 ,0xe0000000 },/* DDRC */ + {/* sentinel */ } +}; +#endif +#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* enable all periherial can be accessed in nosec mode */ static void init_csu (void )
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 3/3 mach-imx: bootaux: elf firmware support
Hi Stefano,
Quoted 125 lines · Stefano Babic
Quoted 99 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Currently imx-specific bootaux command doesn't support ELF format firmware for Cortex-M4 core.
This patches introduces a PoC implementation of handling elf firmware (
load_elf_image_phdr()was copy-pasted fromelf.cjust for PoC).This has the advantage that the user does not need to know to which address the binary has been linked to. However, in order to handle and load the elf sections to the right address, we need to translate the Cortex-M4 core memory addresses to primary/host CPU memory addresses (Cortex A7/A9 cores).
This allows to boot firmwares from any location with just using bootaux, e.g.:
Quoted 1 line
tftp ${loadaddr} hello_world.elf && bootaux ${loadaddr}
Similar translation table can be found in the Linux remoteproc driver [1].
[1] https://elixir.bootlin.com/linux/latest/source/drivers/remoteproc/imx_rproc.c
Signed-off-by Igor Opaniuk <[email protected]>Signed-off-by Stefan Agner <[email protected]>---
arch/arm/include/asm/mach-imx/sys_proto.h | 7 ++ arch/arm/mach-imx/imx_bootaux.c | 84 +++++++++++++++++++++-- arch/arm/mach-imx/mx7/soc.c | 28 ++++++++ 3 files changed, 115 insertions(+), 4 deletions(-)arch/arm/include/asm/mach-imx/sys_proto.h +7
-0@@ -104,6 +104,13 @@ void gpr_init(void);#endif /* CONFIG_MX6 */ +/* address translation table */ +struct rproc_att { +u32 da;/* device address (From Cortex M4 view) */ +u32 sa;/* system bus address */ +u32 size;/* size of reg range */ +}; +u32 get_nr_cpus (void );u32 get_cpu_rev (void );u32 get_cpu_speed_grade_hz (void );arch/arm/mach-imx/imx_bootaux.c +37
-1@@ -7,18 +7,94 @@#include <asm/io.h> #include <asm/mach-imx/sys_proto.h> #include <command.h> +#include <elf.h> #include <imx_sip.h> #include <linux/compiler.h> -int arch_auxiliary_core_up (u32 core_id,ulong boot_private_data) +const __weak struct rproc_att hostmap[] = { }; + +static const struct rproc_att *get_host_mapping (unsigned long auxcore) +{ +const struct rproc_att *mmap = hostmap; + +while (mmap && mmap->size) { +if (mmap->da <= auxcore && + mmap->da + mmap->size > auxcore) +return mmap; + mmap++; + } + +return NULL ; +} + +/* +* A very simple elf loader, assumes the image is valid, returns the +* entry point address. +*/ +static unsigned long load_elf_image_phdr (unsigned long addr) +{ +Elf32_Ehdr *ehdr;/* ELF header structure pointer */ +Elf32_Phdr *phdr;/* Program header structure pointer */ +int i; + + ehdr = (Elf32_Ehdr *)addr; + phdr = (Elf32_Phdr *)(addr + ehdr->e_phoff); + +/* Load each program header */ +for (i =0 ; i < ehdr->e_phnum; ++i, ++phdr) { +const struct rproc_att *mmap =get_host_mapping (phdr->p_paddr); +void *dst, *src; + +if (phdr->p_type !=PT_LOAD ) +continue ;arch/arm/mach-imx/imx_bootaux.c line 59
Quoted 10 lines
arch/arm/mach-imx/imx_bootaux.c +10
-0+ +if (!mmap) { +printf ("Invalid aux core address: %08x" , + phdr->p_paddr); +return 0 ; + } + + dst = (void *)(phdr->p_paddr - mmap->da) + mmap->sa; + src = (void *)addr + phdr->p_offset; +This generates a warning on 64bit targets (like
imx8mq_evk):aarch64: w+
imx8mq_evk
+WARNING 'signed_hdmi_imx8m.bin' not found, resulting binary is not-functional(quoted diff) +2
-0+ dst = (void *)(phdr->p_paddr) ;//- mmap->da + mmap->sa; + ^
w+arch/arm/mach-imx/imx_bootaux.c: In function 'load_elf_image_phdr':w+arch/arm/mach-imx/imx_bootaux.c:58:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Quoted 2 lines
Can you take a look ? I merge 1/3 and 2/3, no need to repost the whole series - thanks !
Thanks for reporting the issue.
I've decided to disable ELF support for now for imx8mq in v3 patch [1], as it needs a bit different implementation pf loader for ELF64 binaries. It makes sense to do refactoring of cmd/elf.c and move common code (ELF loading etc.) to a different file (I'll do that for the next U-boot release),
which can be then re-used from bootaux command implementation.
v3 currently builds with one un-related to this patch warning:
u-boot-imx.git$ ./tools/buildman/buildman -f -j10 -d imx8mq_evk -v ../boards.cfg is up to date. Nothing to do.
Building current source for 1 boards (1 thread, 10 jobs per thread)
aarch64: w+ imx8mq_evk
+WARNING 'signed_hdmi_imx8m.bin' not found, resulting binary is not-functional
0 1 0 /1 imx8mq_evk
[1] https://patchwork.ozlabs.org/patch/1216413/
Quoted 95 lines
Best regards,
StefanoQuoted 74 lines
arch/arm/mach-imx/imx_bootaux.c +33
-3+debug ("Loading phdr %i to 0x%p (%i bytes)\n" , + i, dst, phdr->p_filesz); + +if (phdr->p_filesz) +memcpy (dst, src, phdr->p_filesz); +if (phdr->p_filesz != phdr->p_memsz) +memset (dst + phdr->p_filesz,0x00 , + phdr->p_memsz - phdr->p_filesz); +flush_cache ((unsigned long )dst & + ~(CONFIG_SYS_CACHELINE_SIZE -1 ), +ALIGN (phdr->p_filesz,CONFIG_SYS_CACHELINE_SIZE )); + } + +return ehdr->e_entry; +} + +int arch_auxiliary_core_up (u32 core_id,ulong addr) {ulong stack, pc; -if (!boot_private_data) +if (!addr)return -EINVAL ; - stack = *(u32 *)boot_private_data; - pc = *(u32 *)(boot_private_data +4 ); +if (valid_elf_image (addr)) { + stack =0x0 ; + pc =load_elf_image_phdr (addr); +if (!pc) +return CMD_RET_FAILURE ; + + }else { +/* +* Assume binary file with vector table at the beginning. +* Cortex-M4 vector tables start with the stack pointer (SP) +* and reset vector (initial PC). +*/ + stack = *(u32 *)addr; + pc = *(u32 *)(addr +4 ); + }printf ("## Starting auxiliary core stack = 0x%08lX, pc = 0x%08lX...\n" , stack, pc);arch/arm/mach-imx/mx7/soc.c +21
-0@@ -193,6 +193,34 @@ static void init_cpu_basic(void)#endif } +#ifdef CONFIG_IMX_BOOTAUX +/* +* Table of mappings of physical mem regions in both +* Cortex-A7 and Cortex-M4 address spaces. +* +* For additional details check sections 2.1.2 and 2.1.3 in +* i.MX7Dual Applications Processor Reference Manual +* +*/ +const struct rproc_att hostmap[] = { +/* aux core , host core, size */ + {0x00000000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x00180000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x20180000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x1fff8000 ,0x007f8000 ,0x8000 },/* TCML */ + {0x20000000 ,0x00800000 ,0x8000 },/* TCMU */ + {0x00900000 ,0x00900000 ,0x20000 },/* OCRAM_128KB */ + {0x20200000 ,0x00900000 ,0x20000 },/* OCRAM_128KB */ + {0x00920000 ,0x00920000 ,0x20000 },/* OCRAM_EPDC */ + {0x20220000 ,0x00920000 ,0x20000 },/* OCRAM_EPDC */ + { 0x00940000, 0x00940000, 0x20000 }, /* OCRAM_PXP */arch/arm/mach-imx/mx7/soc.c static void init_cpu_basic(void) · line 226
Quoted 10 lines
arch/arm/mach-imx/mx7/soc.c +7
-0+ { 0x20240000, 0x00940000, 0x20000 }, /* OCRAM_PXP */ + { 0x10000000, 0x80000000, 0x0fff0000 }, /* DDR Code alias */ + { 0x80000000, 0x80000000, 0xe0000000 }, /* DDRC */ + { /* sentinel */ } +}; +#endif + #ifndef CONFIG_SKIP_LOWLEVEL_INIT /* enable all periherial can be accessed in nosec mode */ static void init_csu(void)--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
Signature · 8 lines
Best regards - Freundliche Grüsse - Meilleures salutations Igor Opaniuk mailto: igor.opaniuk at gmail.com skype: igor.opanyuk +380 (93) 836 40 67 http://ua.linkedin.com/in/iopaniuk
PATCH v2 3/3 mach-imx: bootaux: elf firmware support
Quoted 128 lines · Igor Opaniuk
Hi Stefano,
Quoted 125 lines · Stefano Babic
Quoted 99 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Currently imx-specific bootaux command doesn't support ELF format firmware for Cortex-M4 core.
This patches introduces a PoC implementation of handling elf firmware (
load_elf_image_phdr()was copy-pasted fromelf.cjust for PoC).This has the advantage that the user does not need to know to which address the binary has been linked to. However, in order to handle and load the elf sections to the right address, we need to translate the Cortex-M4 core memory addresses to primary/host CPU memory addresses (Cortex A7/A9 cores).
This allows to boot firmwares from any location with just using bootaux, e.g.:
Quoted 1 line
tftp ${loadaddr} hello_world.elf && bootaux ${loadaddr}
Similar translation table can be found in the Linux remoteproc driver [1].
[1] https://elixir.bootlin.com/linux/latest/source/drivers/remoteproc/imx_rproc.c
Signed-off-by Igor Opaniuk <[email protected]>Signed-off-by Stefan Agner <[email protected]>---
arch/arm/include/asm/mach-imx/sys_proto.h | 7 ++ arch/arm/mach-imx/imx_bootaux.c | 84 +++++++++++++++++++++-- arch/arm/mach-imx/mx7/soc.c | 28 ++++++++ 3 files changed, 115 insertions(+), 4 deletions(-)arch/arm/include/asm/mach-imx/sys_proto.h +7
-0@@ -104,6 +104,13 @@ void gpr_init(void);#endif /* CONFIG_MX6 */ +/* address translation table */ +struct rproc_att { +u32 da;/* device address (From Cortex M4 view) */ +u32 sa;/* system bus address */ +u32 size;/* size of reg range */ +}; +u32 get_nr_cpus (void );u32 get_cpu_rev (void );u32 get_cpu_speed_grade_hz (void );arch/arm/mach-imx/imx_bootaux.c +37
-1@@ -7,18 +7,94 @@#include <asm/io.h> #include <asm/mach-imx/sys_proto.h> #include <command.h> +#include <elf.h> #include <imx_sip.h> #include <linux/compiler.h> -int arch_auxiliary_core_up (u32 core_id,ulong boot_private_data) +const __weak struct rproc_att hostmap[] = { }; + +static const struct rproc_att *get_host_mapping (unsigned long auxcore) +{ +const struct rproc_att *mmap = hostmap; + +while (mmap && mmap->size) { +if (mmap->da <= auxcore && + mmap->da + mmap->size > auxcore) +return mmap; + mmap++; + } + +return NULL ; +} + +/* +* A very simple elf loader, assumes the image is valid, returns the +* entry point address. +*/ +static unsigned long load_elf_image_phdr (unsigned long addr) +{ +Elf32_Ehdr *ehdr;/* ELF header structure pointer */ +Elf32_Phdr *phdr;/* Program header structure pointer */ +int i; + + ehdr = (Elf32_Ehdr *)addr; + phdr = (Elf32_Phdr *)(addr + ehdr->e_phoff); + +/* Load each program header */ +for (i =0 ; i < ehdr->e_phnum; ++i, ++phdr) { +const struct rproc_att *mmap =get_host_mapping (phdr->p_paddr); +void *dst, *src; + +if (phdr->p_type !=PT_LOAD ) +continue ;arch/arm/mach-imx/imx_bootaux.c line 59
Quoted 10 lines
arch/arm/mach-imx/imx_bootaux.c +10
-0+ +if (!mmap) { +printf ("Invalid aux core address: %08x" , + phdr->p_paddr); +return 0 ; + } + + dst = (void *)(phdr->p_paddr - mmap->da) + mmap->sa; + src = (void *)addr + phdr->p_offset; +This generates a warning on 64bit targets (like
imx8mq_evk):aarch64: w+
imx8mq_evk
+WARNING 'signed_hdmi_imx8m.bin' not found, resulting binary is not-functional(quoted diff) +2
-0+ dst = (void *)(phdr->p_paddr) ;//- mmap->da + mmap->sa; + ^
w+arch/arm/mach-imx/imx_bootaux.c: In function 'load_elf_image_phdr':w+arch/arm/mach-imx/imx_bootaux.c:58:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Quoted 7 lines
Quoted 2 lines
Can you take a look ? I merge 1/3 and 2/3, no need to repost the whole series - thanks !
Thanks for reporting the issue.
I've decided to disable ELF support for now for imx8mq in v3 patch [1], as it needs a bit different implementation pf loader for ELF64 binaries.
Right, I took a look, too, and changes are not trivial - it is fine for me how to solve it and to enable for mx8m only.
Quoted 2 lines
It makes sense to do refactoring of
cmd/elf.cand move common code (ELF loading etc.) to a different file
Fully agree.
Quoted 2 lines
(I'll do that for the next
U-boot release),
...well, this is already next release. Series flew into my -next branch, I am allowed to push just fixes for 2020.01. I pick up your V3, too, into my -next.
Regards,
Stefano
Quoted 109 lines
which can be then re-used from bootaux command implementation.
v3 currently builds with one un-related to this patch warning:
u-boot-imx.git$./tools/buildman/buildman-f -j10 -dimx8mq_evk-v ../boards.cfg is up to date. Nothing to do.
Building current source for 1 boards (1 thread, 10 jobs per thread)
aarch64: w+imx8mq_evk
+WARNING 'signed_hdmi_imx8m.bin' not found, resulting binary is not-functional
0 1 0 /1imx8mq_evk[1] https://patchwork.ozlabs.org/patch/1216413/
Quoted 95 lines
Best regards,
StefanoQuoted 74 lines
arch/arm/mach-imx/imx_bootaux.c +33
-3+debug ("Loading phdr %i to 0x%p (%i bytes)\n" , + i, dst, phdr->p_filesz); + +if (phdr->p_filesz) +memcpy (dst, src, phdr->p_filesz); +if (phdr->p_filesz != phdr->p_memsz) +memset (dst + phdr->p_filesz,0x00 , + phdr->p_memsz - phdr->p_filesz); +flush_cache ((unsigned long )dst & + ~(CONFIG_SYS_CACHELINE_SIZE -1 ), +ALIGN (phdr->p_filesz,CONFIG_SYS_CACHELINE_SIZE )); + } + +return ehdr->e_entry; +} + +int arch_auxiliary_core_up (u32 core_id,ulong addr) {ulong stack, pc; -if (!boot_private_data) +if (!addr)return -EINVAL ; - stack = *(u32 *)boot_private_data; - pc = *(u32 *)(boot_private_data +4 ); +if (valid_elf_image (addr)) { + stack =0x0 ; + pc =load_elf_image_phdr (addr); +if (!pc) +return CMD_RET_FAILURE ; + + }else { +/* +* Assume binary file with vector table at the beginning. +* Cortex-M4 vector tables start with the stack pointer (SP) +* and reset vector (initial PC). +*/ + stack = *(u32 *)addr; + pc = *(u32 *)(addr +4 ); + }printf ("## Starting auxiliary core stack = 0x%08lX, pc = 0x%08lX...\n" , stack, pc);arch/arm/mach-imx/mx7/soc.c +21
-0@@ -193,6 +193,34 @@ static void init_cpu_basic(void)#endif } +#ifdef CONFIG_IMX_BOOTAUX +/* +* Table of mappings of physical mem regions in both +* Cortex-A7 and Cortex-M4 address spaces. +* +* For additional details check sections 2.1.2 and 2.1.3 in +* i.MX7Dual Applications Processor Reference Manual +* +*/ +const struct rproc_att hostmap[] = { +/* aux core , host core, size */ + {0x00000000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x00180000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x20180000 ,0x00180000 ,0x8000 },/* OCRAM_S */ + {0x1fff8000 ,0x007f8000 ,0x8000 },/* TCML */ + {0x20000000 ,0x00800000 ,0x8000 },/* TCMU */ + {0x00900000 ,0x00900000 ,0x20000 },/* OCRAM_128KB */ + {0x20200000 ,0x00900000 ,0x20000 },/* OCRAM_128KB */ + {0x00920000 ,0x00920000 ,0x20000 },/* OCRAM_EPDC */ + {0x20220000 ,0x00920000 ,0x20000 },/* OCRAM_EPDC */ + { 0x00940000, 0x00940000, 0x20000 }, /* OCRAM_PXP */arch/arm/mach-imx/mx7/soc.c static void init_cpu_basic(void) · line 226
Quoted 10 lines
arch/arm/mach-imx/mx7/soc.c +7
-0+ { 0x20240000, 0x00940000, 0x20000 }, /* OCRAM_PXP */ + { 0x10000000, 0x80000000, 0x0fff0000 }, /* DDR Code alias */ + { 0x80000000, 0x80000000, 0xe0000000 }, /* DDRC */ + { /* sentinel */ } +}; +#endif + #ifndef CONFIG_SKIP_LOWLEVEL_INIT /* enable all periherial can be accessed in nosec mode */ static void init_csu(void)--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 1/3 mach-imx: bootaux: print stack pointer and reset vector
In reply to Igor OpaniukQuoted 8 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
1. Change information printed about loaded M4 binary, print the stack pointer and reset vector addressed.
2. Add sanity check for the address provided as param.Signed-off-by Igor Opaniuk <[email protected]>
Quoted 36 lines
---
arch/arm/mach-imx/imx_bootaux.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)arch/arm/mach-imx/imx_bootaux.c +5
-2@@ -20,6 +20,9 @@ int arch_auxiliary_core_up(u32 core_id, ulong boot_private_data) stack = *(u32 *)boot_private_data; pc = *(u32 *)(boot_private_data +4 ); +printf ("## Starting auxiliary core stack = 0x%08lX, pc = 0x%08lX...\n" , + stack, pc); +/* Set the stack and pc to M4 bootROM */ writel (stack,M4_BOOTROM_BASE_ADDR );writel (pc,M4_BOOTROM_BASE_ADDR +4 );@@ -80,7 +83,8 @@ static int do_bootaux(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) addr =simple_strtoul (argv[1 ],NULL ,16 ); -printf ("## Starting auxiliary core at 0x%08lX ...\n" , addr); +if (!addr) +return CMD_RET_FAILURE ; ret =arch_auxiliary_core_up (0 , addr);if (ret) --2.17.1
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
Signature · 6 lines
Best regards Oleksandr Suvorov Toradex AG Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500 4800 (main line)
PATCH v2 1/3 mach-imx: bootaux: print stack pointer and reset vector
In reply to Igor OpaniukQuoted 6 lines
From: Igor Opaniuk <[email protected]>
1. Change information printed about loaded M4 binary, print the stack pointer and reset vector addressed.
2. Add sanity check for the address provided as param.Signed-off-by Igor Opaniuk <[email protected]>Reviewed-by Oleksandr Suvorov <[email protected]>
Applied to u-boot-imx, -next, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================