Skip to contentSkip to conversation

docs: w1: Fix a typo in omap-hdq.rst

PATCH Applied Masanari Iida 2 participants 2 messages Dec 25, 2019 – Dec 30, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 docs: w1: Fix a typo in omap-hdq.rst

This patch fix a spelling typo in omap-hdq.rst

---
 Documentation/w1/masters/omap-hdq.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/w1/masters/omap-hdq.rst +1 -1
index 345298a59e50..5347b5d9e90a 100644
@@ -44,7 +44,7 @@ that the ID used should be same for both master and slave driver loading.
 e.g::
 
   insmod omap_hdq.ko W1_ID=2
-  inamod w1_bq27000.ko F_ID=2
+  insmod w1_bq27000.ko F_ID=2
 
 The driver also supports 1-wire mode. In this mode, there is no need to
 pass slave ID as parameter. The driver will auto-detect slaves connected
Signature · 1 line
2.24.1.590.gb02fd2accad4
maintainer Applied
#1 lore raw
Quoted 12 lines · On Thu, 26 Dec 2019 01:55:34 +0900 Masanari Iida <[email protected]> wrote:

This patch fix a spelling typo in omap-hdq.rst

---
 Documentation/w1/masters/omap-hdq.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/w1/masters/omap-hdq.rst +0 -0
index 345298a59e50..5347b5d9e90a 100644

Documentation/w1/masters/omap-hdq.rst that the ID used should be same for both master and slave driver loading. · line 47

Quoted 5 lines
Documentation/w1/masters/omap-hdq.rst +1 -1
@@ -44,7 +44,7 @@ that the ID used should be same for both master and slave driver loading.
 e.g::
 
   insmod omap_hdq.ko W1_ID=2
-  inamod w1_bq27000.ko F_ID=2
+  insmod w1_bq27000.ko F_ID=2

Applied, thanks.

jon