doc: fix opensbi build steps for AX25-AE350
PATCH 1/1 doc: fix opensbi build steps for AX25-AE350
OpenSBI build steps are marked as normal text in
AX25-AE350 documentation.
Move them into code-block so-that it can show it
as build steps.
--- doc/board/AndesTech/ax25-ae350.rst | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
doc/board/AndesTech/ax25-ae350.rst +5 -3
@@ -337,9 +337,11 @@ How to build U-Boot SPL Before building U-Boot SPL, OpenSBI must be build first. OpenSBI can be cloned and build for AE350 as below: -git clone https://github.com/riscv/opensbi.git -cd opensbi -make PLATFORM=andes/ae350 +.. code-block:: none + + git clone https://github.com/riscv/opensbi.git + cd opensbi + make PLATFORM=andes/ae350 Copy OpenSBI FW_DYNAMIC image (build\platform\andes\ae350\firmware\fw_dynamic.bin) into U-Boot root directory
Signature · 1 line
2.18.0.321.gffc6fa0e3
PATCH 1/1 doc: fix opensbi build steps for AX25-AE350
Quoted 4 lines · Jagan Teki
OpenSBI build steps are marked as normal text in
AX25-AE350 documentation.
Quoted 9 lines
Move them into code-block so-that it can show it
as build steps.Cc Heinrich Schuchardt <[email protected]>Signed-off-by Jagan Teki <[email protected]>--- doc/board/AndesTech/ax25-ae350.rst | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/1 doc: fix opensbi build steps for AX25-AE350
Quoted 6 lines
From: Jagan Teki [mailto:jagan at amarulasolutions.com]
Sent: Monday, December 30, 2019 10:29 PM
To: Rick Jian-Zhi Chen(陳建志); Bin Meng
Cc: u-boot at lists.denx.de; Jagan Teki; Heinrich Schuchardt
Subject: [PATCH] doc: fix opensbi build steps for AX25-AE350
Quoted 7 lines
OpenSBI build steps are marked as normal text in
AX25-AE350 documentation.Move them into code-block so-that it can show it as build steps.
Cc Heinrich Schuchardt <[email protected]>Signed-off-by Jagan Teki <[email protected]>
Quoted 23 lines
--- doc/board/AndesTech/ax25-ae350.rst | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)doc/board/AndesTech/ax25-ae350.rst +5
-4@@ -337,9 +337,11 @@ How to build U-Boot SPL Before building U-Boot SPL, OpenSBI must be build first. OpenSBI can be cloned and build for AE350 as below: -git clone https://github.com/riscv/opensbi.git -cd opensbi -make PLATFORM=andes/ae350 +.. code-block:: none + + git clone https://github.com/riscv/opensbi.git + cd opensbi + make PLATFORM=andes/ae350 Copy OpenSBI FW_DYNAMIC image (build\platform\andes\ae350\firmware\fw_dynamic.bin) into U-Boot root directory --2.18.0.321.gffc6fa0e3
PATCH 1/1 doc: fix opensbi build steps for AX25-AE350
In reply to Jagan TekiQuoted 4 lines · Jagan Teki
OpenSBI build steps are marked as normal text in
AX25-AE350 documentation.
Quoted 9 lines
Move them into code-block so-that it can show it
as build steps.Cc Heinrich Schuchardt <[email protected]>Signed-off-by Jagan Teki <[email protected]>--- doc/board/AndesTech/ax25-ae350.rst | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)