Skip to contentSkip to conversation

configs/zynq_qmtech: new defconfig

PATCH New Julien Olivain 2 participants 2 messages Jan 2, 2020 – Apr 19, 2020 Arm/Zynq architecture

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 configs/zynq_qmtech: new defconfig

This patch add support for the low cost QMTECH XC7Z010 starter kit board [1].

[1] http://www.chinaqmtech.com/xilinx_zynq_soc

---
 .gitlab-ci.yml                                |   1 +
 DEVELOPERS                                    |   2 +
 ...0001-DTS-for-QMTech-Zynq-starter-kit.patch | 418 ++++++++++++++++++
 board/qmtech/zynq/readme.txt                  |  76 ++++
 configs/zynq_qmtech_defconfig                 |  32 ++
 5 files changed, 529 insertions(+)
 create mode 100644 board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch
 create mode 100644 board/qmtech/zynq/readme.txt
 create mode 100644 configs/zynq_qmtech_defconfig
.gitlab-ci.yml +1 -0
index 3fbe2974d2..d2551148e2 100644
@@ -327,6 +327,7 @@ wandboard_defconfig: { extends: .defconfig }
 warp7_defconfig: { extends: .defconfig }
 warpboard_defconfig: { extends: .defconfig }
 zynq_microzed_defconfig: { extends: .defconfig }
+zynq_qmtech_defconfig: { extends: .defconfig }
 zynq_zc706_defconfig: { extends: .defconfig }
 zynq_zed_defconfig: { extends: .defconfig }
 zynqmp_zcu106_defconfig: { extends: .defconfig }
DEVELOPERS +2 -0
index 90941dd4c8..7c9b132e2f 100644
@@ -1371,10 +1371,12 @@ F:	configs/ts7680_defconfig
 F:	package/paho-mqtt-c
 
 N:	Julien Olivain <[email protected]>
+F:	board/qmtech/zynq/
 F:	board/technexion/imx8mmpico/
 F:	board/technexion/imx8mpico/
 F:	configs/imx8mmpico_defconfig
 F:	configs/imx8mpico_defconfig
+F:	configs/zynq_qmtech_defconfig
 F:	package/fluid-soundfont/
 F:	package/fluidsynth/
 
board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch new file +418 -0

418 lines not on this page · raw message

board/qmtech/zynq/readme.txt new file +76 -0

76 lines not on this page · raw message

configs/zynq_qmtech_defconfig new file +32 -0
new file mode 100644
index 0000000000..4db3f68b1f
@@ -0,0 +1,32 @@
+BR2_arm=y
+BR2_cortex_a9=y
+BR2_ARM_ENABLE_NEON=y
+BR2_ARM_ENABLE_VFP=y
+BR2_GLOBAL_PATCH_DIR="board/qmtech/zynq/patches"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyPS0"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xilinx-v2019.2.01)/linux-xilinx-v2019.2.01.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq"
+BR2_LINUX_KERNEL_UIMAGE=y
+BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="zynq-qmtech"
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_CPIO_GZIP=y
+BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,jolivain,u-boot-xlnx,xilinx-v2019.2.qmtech.1)/uboot-xilinx-v2019.2.qmtech.1.tar.gz"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="zynq_qmtech"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
Signature · 1 line
2.24.1
#1 lore raw

PATCH 1/1 configs/zynq_qmtech: new defconfig

Quoted 7 lines · On Thu, 2 Jan 2020 20:41:20 +0100 Julien Olivain <[email protected]> wrote:

This patch add support for the low cost QMTECH XC7Z010 starter kit board [1].

[1] http://www.chinaqmtech.com/xilinx_zynq_soc

Quoted 10 lines
---
 .gitlab-ci.yml                                |   1 +
 DEVELOPERS                                    |   2 +
 ...0001-DTS-for-QMTech-Zynq-starter-kit.patch | 418 ++++++++++++++++++
 board/qmtech/zynq/readme.txt                  |  76 ++++
 configs/zynq_qmtech_defconfig                 |  32 ++
 5 files changed, 529 insertions(+)
 create mode 100644 board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch
 create mode 100644 board/qmtech/zynq/readme.txt
 create mode 100644 configs/zynq_qmtech_defconfig

Sorry for the slow feedback, I've now applied your patch. It would be good to get the support for this platform in upstream Linux/U-Boot perhaps?

Best regards,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com