Skip to contentSkip to conversation

Use ARM SMC Calling Convention when OP-TEE is available

PATCH In review Andrew F. Davis 3 participants 7 messages Jan 2, 2020 – Jan 13, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v4 cover Use ARM SMC Calling Convention when OP-TEE is available

Hello all,

This is the reworked patch turned into a series to allow upstream kernels to make use of OP-TEE on the OMAP2+ platform.

Thanks,
Andrew

Changes from v1:
- Split into logical patches
- Check for OP-TEE in DT only once
- Check the OP-TEE node is "okay"

Changes from v2:
- Add HS patch using 'optee_available'

Changes from v3:
- Add comments as suggested by Tony and Lokesh

Andrew F. Davis (4):
ARM: OMAP2+: Add omap_secure_init callback hook for secure
initialization
ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init()
ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available
ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers

 arch/arm/mach-omap2/common.h      |  2 +-
 arch/arm/mach-omap2/io.c          | 11 +++++++
 arch/arm/mach-omap2/omap-secure.c | 50 +++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap-secure.h | 10 +++++++
 arch/arm/mach-omap2/omap-smc.S    |  6 ++--
 arch/arm/mach-omap2/pm33xx-core.c | 24 +++++++++++++++
 6 files changed, 99 insertions(+), 4 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v4 1/4 ARM: OMAP2+: Add omap_secure_init callback hook for secure initialization

This can be used for detecting secure features or making early device init sequence changes based on device security type.

---
 arch/arm/mach-omap2/io.c          | 11 +++++++++++
 arch/arm/mach-omap2/omap-secure.c |  4 ++++
 arch/arm/mach-omap2/omap-secure.h |  2 ++
 3 files changed, 17 insertions(+)
arch/arm/mach-omap2/io.c +11 -0
index 349e48042982..f28047233665 100644
@@ -51,6 +51,7 @@
 #include "prm33xx.h"
 #include "prm44xx.h"
 #include "opp2xxx.h"
+#include "omap-secure.h"
 
 /*
  * omap_clk_soc_init: points to a function that does the SoC-specific
@@ -430,6 +431,7 @@ void __init omap2420_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = omap2420_dt_clk_init;
 	rate_table = omap2420_rate_table;
+	omap_secure_init();
 }
 
 void __init omap2420_init_late(void)
@@ -454,6 +456,7 @@ void __init omap2430_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = omap2430_dt_clk_init;
 	rate_table = omap2430_rate_table;
+	omap_secure_init();
 }
 
 void __init omap2430_init_late(void)
@@ -481,6 +484,7 @@ void __init omap3_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
+	omap_secure_init();
 }
 
 void __init omap3430_init_early(void)
@@ -533,6 +537,7 @@ void __init ti814x_init_early(void)
 	dm814x_hwmod_init();
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = dm814x_dt_clk_init;
+	omap_secure_init();
 }
 
 void __init ti816x_init_early(void)
@@ -549,6 +554,7 @@ void __init ti816x_init_early(void)
 	dm816x_hwmod_init();
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = dm816x_dt_clk_init;
+	omap_secure_init();
 }
 #endif
 
@@ -566,6 +572,7 @@ void __init am33xx_init_early(void)
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = am33xx_dt_clk_init;
+	omap_secure_init();
 }
 
 void __init am33xx_init_late(void)
@@ -589,6 +596,7 @@ void __init am43xx_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap_l2_cache_init();
 	omap_clk_soc_init = am43xx_dt_clk_init;
+	omap_secure_init();
 }
 
 void __init am43xx_init_late(void)
@@ -617,6 +625,7 @@ void __init omap4430_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap_l2_cache_init();
 	omap_clk_soc_init = omap4xxx_dt_clk_init;
+	omap_secure_init();
 }
 
 void __init omap4430_init_late(void)
@@ -643,6 +652,7 @@ void __init omap5_init_early(void)
 	omap54xx_hwmod_init();
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = omap5xxx_dt_clk_init;
+	omap_secure_init();
 }
 
 void __init omap5_init_late(void)
@@ -666,6 +676,7 @@ void __init dra7xx_init_early(void)
 	dra7xx_hwmod_init();
 	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = dra7xx_dt_clk_init;
+	omap_secure_init();
 }
 
 void __init dra7xx_init_late(void)
arch/arm/mach-omap2/omap-secure.c +4 -0
index 24298e47b9f1..e936732cdc4f 100644
@@ -163,3 +163,7 @@ u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag)
 				      NO_FLAG,
 				      3, ptr, count, flag, 0);
 }
+
+void __init omap_secure_init(void)
+{
+}
arch/arm/mach-omap2/omap-secure.h +2 -0
index 20046e8f8ecb..9aeeb236a224 100644
@@ -72,6 +72,8 @@ extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
 extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits);
 extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag);
 
+void omap_secure_init(void);
+
 #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
 void set_cntfreq(void);
 #else
Signature · 1 line
2.17.1
#2 lore raw

PATCH v4 2/4 ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init()

In reply to Andrew F. Davis

This check and associated flag can be used to signal the presence of OP-TEE on the platform. This can be used to determine which SMC calls to make to perform secure operations.

---
 arch/arm/mach-omap2/omap-secure.c | 19 +++++++++++++++++++
 arch/arm/mach-omap2/omap-secure.h |  3 +++
 2 files changed, 22 insertions(+)
arch/arm/mach-omap2/omap-secure.c +19 -0
index e936732cdc4f..568646660081 100644
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/memblock.h>
+#include <linux/of.h>
 
 #include <asm/cacheflush.h>
 #include <asm/memblock.h>
@@ -20,6 +21,23 @@
 
 static phys_addr_t omap_secure_memblock_base;
 
+bool optee_available;
+
+static void __init omap_optee_init_check(void)
+{
+	struct device_node *np;
+
+	/*
+	 * We only check that the OP-TEE node is present and available. The
+	 * OP-TEE kernel driver is not needed for the type of interaction made
+	 * with OP-TEE here so the driver's status is not checked.
+	 */
+	np = of_find_node_by_path("/firmware/optee");
+	if (np && of_device_is_available(np))
+		optee_available = true;
+	of_node_put(np);
+}
+
 /**
  * omap_sec_dispatcher: Routine to dispatch low power secure
  * service routines
@@ -166,4 +184,5 @@ u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag)
 
 void __init omap_secure_init(void)
 {
+	omap_optee_init_check();
 }
arch/arm/mach-omap2/omap-secure.h +3 -0
index 9aeeb236a224..78a1c4f04bbe 100644
@@ -10,6 +10,8 @@
 #ifndef OMAP_ARCH_OMAP_SECURE_H
 #define OMAP_ARCH_OMAP_SECURE_H
 
+#include <linux/types.h>
+
 /* Monitor error code */
 #define  API_HAL_RET_VALUE_NS2S_CONVERSION_ERROR	0xFFFFFFFE
 #define  API_HAL_RET_VALUE_SERVICE_UNKNWON		0xFFFFFFFF
@@ -72,6 +74,7 @@ extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
 extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits);
 extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag);
 
+extern bool optee_available;
 void omap_secure_init(void);
 
 #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
Signature · 1 line
2.17.1
#3 lore raw

PATCH v4 3/4 ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available

In reply to Andrew F. Davis

On High-Security(HS) OMAP2+ class devices a couple actions must be performed from the ARM TrustZone during boot. These traditionally can be performed by calling into the secure ROM code resident in this secure world using legacy SMC calls. Optionally OP-TEE can replace this secure world functionality by replacing the ROM after boot. ARM recommends a standard calling convention is used for this interaction (SMC Calling Convention). We check for the presence of OP-TEE and use this type of call to perform the needed actions, falling back to the legacy OMAP ROM call if OP-TEE is not available.

---
 arch/arm/mach-omap2/common.h      |  2 +-
 arch/arm/mach-omap2/omap-secure.c | 27 +++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap-secure.h |  2 ++
 arch/arm/mach-omap2/omap-smc.S    |  6 +++---
 4 files changed, 33 insertions(+), 4 deletions(-)
arch/arm/mach-omap2/common.h +1 -1
index 223b37c48389..3b1fd8e7d705 100644
@@ -255,7 +255,7 @@ extern void gic_dist_disable(void);
 extern void gic_dist_enable(void);
 extern bool gic_dist_disabled(void);
 extern void gic_timer_retrigger(void);
-extern void omap_smc1(u32 fn, u32 arg);
+extern void _omap_smc1(u32 fn, u32 arg);
 extern void omap4_sar_ram_init(void);
 extern void __iomem *omap4_get_sar_ram_base(void);
 extern void omap4_mpuss_early_init(void);
arch/arm/mach-omap2/omap-secure.c +27 -0
index 568646660081..d00e3c72e37d 100644
@@ -8,6 +8,7 @@
  * Copyright (C) 2013 Pali Rohár <[email protected]>
  */
 
+#include <linux/arm-smccc.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -17,12 +18,17 @@
 #include <asm/cacheflush.h>
 #include <asm/memblock.h>
 
+#include "common.h"
 #include "omap-secure.h"
 
 static phys_addr_t omap_secure_memblock_base;
 
 bool optee_available;
 
+#define OMAP_SIP_SMC_STD_CALL_VAL(func_num) \
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_32, \
+	ARM_SMCCC_OWNER_SIP, (func_num))
+
 static void __init omap_optee_init_check(void)
 {
 	struct device_node *np;
@@ -71,6 +77,27 @@ u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2,
 	return ret;
 }
 
+void omap_smccc_smc(u32 fn, u32 arg)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(OMAP_SIP_SMC_STD_CALL_VAL(fn), arg,
+		      0, 0, 0, 0, 0, 0, &res);
+	WARN(res.a0, "Secure function call 0x%08x failed\n", fn);
+}
+
+void omap_smc1(u32 fn, u32 arg)
+{
+	/*
+	 * If this platform has OP-TEE installed we use ARM SMC calls
+	 * otherwise fall back to the OMAP ROM style calls.
+	 */
+	if (optee_available)
+		omap_smccc_smc(fn, arg);
+	else
+		_omap_smc1(fn, arg);
+}
+
 /* Allocate the memory to save secure ram */
 int __init omap_secure_ram_reserve_memblock(void)
 {
arch/arm/mach-omap2/omap-secure.h +2 -0
index 78a1c4f04bbe..736e594365f4 100644
@@ -62,6 +62,8 @@
 
 extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs,
 				u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+extern void omap_smccc_smc(u32 fn, u32 arg);
+extern void omap_smc1(u32 fn, u32 arg);
 extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
 extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
 extern phys_addr_t omap_secure_ram_mempool_base(void);
arch/arm/mach-omap2/omap-smc.S +3 -3
index fd2bcd91f4a1..d4832845a4e8 100644
@@ -18,18 +18,18 @@
  * the monitor API number. It uses few CPU registers
  * internally and hence they need be backed up including
  * link register "lr".
- * Function signature : void omap_smc1(u32 fn, u32 arg)
+ * Function signature : void _omap_smc1(u32 fn, u32 arg)
  */
 	.arch armv7-a
 	.arch_extension sec
-ENTRY(omap_smc1)
+ENTRY(_omap_smc1)
 	stmfd   sp!, {r2-r12, lr}
 	mov	r12, r0
 	mov 	r0, r1
 	dsb
 	smc	#0
 	ldmfd   sp!, {r2-r12, pc}
-ENDPROC(omap_smc1)
+ENDPROC(_omap_smc1)
 
 /**
  * u32 omap_smc2(u32 id, u32 falg, u32 pargs)
Signature · 1 line
2.17.1
#4 lore raw

PATCH v4 4/4 ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers

In reply to Andrew F. Davis

During suspend CPU context may be lost in both non-secure and secure CPU states. The kernel can handle saving and restoring the non-secure context but must call into the secure side to allow it to save any context it may lose. Add these calls here.

Note that on systems with OP-TEE available the suspend call is issued to OP-TEE using the ARM SMCCC, but the resume call is always issued to the ROM. This is because on waking from suspend the ROM is restored as the secure monitor. It is this resume call that instructs the ROM to restore OP-TEE, all subsequent calls will be handled by OP-TEE and should use the ARM SMCCC.

---
 arch/arm/mach-omap2/omap-secure.h |  3 +++
 arch/arm/mach-omap2/pm33xx-core.c | 24 ++++++++++++++++++++++++
 2 files changed, 27 insertions(+)
arch/arm/mach-omap2/omap-secure.h +3 -0
index 736e594365f4..ba8c486c0454 100644
@@ -53,6 +53,9 @@
 #define OMAP4_PPA_L2_POR_INDEX		0x23
 #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
 
+#define AM43xx_PPA_SVC_PM_SUSPEND	0x71
+#define AM43xx_PPA_SVC_PM_RESUME	0x72
+
 /* Secure RX-51 PPA (Primary Protected Application) APIs */
 #define RX51_PPA_HWRNG			29
 #define RX51_PPA_L2_INVAL		40
arch/arm/mach-omap2/pm33xx-core.c +24 -0
index f11442ed3eff..7461b0346549 100644
@@ -28,6 +28,7 @@
 #include "prm33xx.h"
 #include "soc.h"
 #include "sram.h"
+#include "omap-secure.h"
 
 static struct powerdomain *cefuse_pwrdm, *gfx_pwrdm, *per_pwrdm, *mpu_pwrdm;
 static struct clockdomain *gfx_l4ls_clkdm;
@@ -166,6 +167,16 @@ static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long),
 {
 	int ret = 0;
 
+	/* Suspend secure side on HS devices */
+	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+		if (optee_available)
+			omap_smccc_smc(AM43xx_PPA_SVC_PM_SUSPEND, 0);
+		else
+			omap_secure_dispatcher(AM43xx_PPA_SVC_PM_SUSPEND,
+					       FLAG_START_CRITICAL,
+					       0, 0, 0, 0, 0);
+	}
+
 	amx3_pre_suspend_common();
 	scu_power_mode(scu_base, SCU_PM_POWEROFF);
 	ret = cpu_suspend(args, fn);
@@ -174,6 +185,19 @@ static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long),
 	if (!am43xx_check_off_mode_enable())
 		amx3_post_suspend_common();
 
+	/*
+	 * Resume secure side on HS devices.
+	 *
+	 * Note that even on systems with OP-TEE available this resume call is
+	 * issued to the ROM. This is because upon waking from suspend the ROM
+	 * is restored as the secure monitor. On systems with OP-TEE ROM will
+	 * restore OP-TEE during this call.
+	 */
+	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
+		omap_secure_dispatcher(AM43xx_PPA_SVC_PM_RESUME,
+				       FLAG_START_CRITICAL,
+				       0, 0, 0, 0, 0);
+
 	return ret;
 }
 
Signature · 1 line
2.17.1
Reviewed-by on the v4 series
#5 lore raw
In reply to Andrew F. Davis
Quoted 4 lines · Andrew F. Davis

Hello all,

This is the reworked patch turned into a series to allow upstream kernels to make use of OP-TEE on the OMAP2+ platform.

FWIW:

Thanks and regards,
Lokesh

Quoted 30 lines

Thanks,
Andrew

Changes from v1:
- Split into logical patches
- Check for OP-TEE in DT only once
- Check the OP-TEE node is "okay"

Changes from v2:
- Add HS patch using 'optee_available'

Changes from v3:
- Add comments as suggested by Tony and Lokesh

Andrew F. Davis (4):
ARM: OMAP2+: Add omap_secure_init callback hook for secure
initialization
ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init()
ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available
ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers

 arch/arm/mach-omap2/common.h      |  2 +-
 arch/arm/mach-omap2/io.c          | 11 +++++++
 arch/arm/mach-omap2/omap-secure.c | 50 +++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap-secure.h | 10 +++++++
 arch/arm/mach-omap2/omap-smc.S    |  6 ++--
 arch/arm/mach-omap2/pm33xx-core.c | 24 +++++++++++++++
 6 files changed, 99 insertions(+), 4 deletions(-)
maintainer
#6 lore raw
In reply to Andrew F. Davis
Quoted 13 lines · Andrew F. Davis

Hello all,

This is the reworked patch turned into a series to allow upstream kernels to make use of OP-TEE on the OMAP2+ platform.

Thanks,
Andrew

Changes from v1:
- Split into logical patches
- Check for OP-TEE in DT only once
- Check the OP-TEE node is "okay"

Quoted 5 lines

Changes from v2:
- Add HS patch using 'optee_available'

Changes from v3:
- Add comments as suggested by Tony and Lokesh

Thanks applying into omap-for-v5.6/soc.

Regards,

Tony