4.14.162-stable review

Signed-off-by James Smart <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/lpfc/lpfc_hbadisc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

drivers/scsi/lpfc/lpfc_hbadisc.c +6 -1

index 3f88f3d79622..4a0889dd4c1d 100644
@@ -5220,9 +5220,14 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
 			/* If we've already received a PLOGI from this NPort
 			 * we don't need to try to discover it again.
 			 */
-			if (ndlp->nlp_flag & NLP_RCV_PLOGI)
+			if (ndlp->nlp_flag & NLP_RCV_PLOGI &&
+			    !(ndlp->nlp_type &
+			     (NLP_FCP_TARGET | NLP_NVME_TARGET)))
 				return NULL;
 
+			ndlp->nlp_prev_state = ndlp->nlp_state;
+			lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
+
 			spin_lock_irq(shost->host_lock);
 			ndlp->nlp_flag |= NLP_NPR_2B_DISC;
 			spin_unlock_irq(shost->host_lock);

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:23 UTC #2 lore raw

PATCH 2/91 scsi: mpt3sas: Fix clear pending bit in ioctl status

From: Sreekanth Reddy <[email protected]>

[ Upstream commit 782b281883caf70289ba6a186af29441a117d23e ]

When user issues diag register command from application with required size, and if driver unable to allocate the memory, then it will fail the register command. While failing the register command, driver is not currently clearing MPT3_CMD_PENDING bit in ctl_cmds.status variable which was set before trying to allocate the memory. As this bit is set, subsequent register command will be failed with BUSY status even when user wants to register the trace buffer will less memory.

Clear MPT3_CMD_PENDING bit in ctl_cmds.status before returning the diag register command with no memory status.

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sreekanth Reddy <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/mpt3sas/mpt3sas_ctl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/scsi/mpt3sas/mpt3sas_ctl.c +2 -1

index bdffb692bded..622dcf2984a9 100644
@@ -1502,7 +1502,8 @@ _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
 			    " for diag buffers, requested size(%d)\n",
 			    ioc->name, __func__, request_data_sz);
 			mpt3sas_base_free_smid(ioc, smid);
-			return -ENOMEM;
+			rc = -ENOMEM;
+			goto out;
 		}
 		ioc->diag_buffer[buffer_type] = request_data;
 		ioc->diag_buffer_sz[buffer_type] = request_data_sz;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:51 UTC #3 lore raw

PATCH 3/91 scsi: lpfc: Fix locking on mailbox command completion

From: James Smart <[email protected]>

[ Upstream commit 07b8582430370097238b589f4e24da7613ca6dd3 ]

Symptoms were seen of the driver not having valid data for mailbox commands. After debugging, the following sequence was found:

The driver maintains a port-wide pointer of the mailbox command that is currently in execution. Once finished, the port-wide pointer is cleared (done in lpfc_sli4_mq_release()). The next mailbox command issued will set the next pointer and so on.

The mailbox response data is only copied if there is a valid port-wide pointer.

In the failing case, it was seen that a new mailbox command was being attempted in parallel with the completion. The parallel path was seeing the mailbox no long in use (flag check under lock) and thus set the port pointer. The completion path had cleared the active flag under lock, but had not touched the port pointer. The port pointer is cleared after the lock is released. In this case, the completion path cleared the just-set value by the parallel path.

Fix by making the calls that clear mbox state/port pointer while under lock. Also slightly cleaned up the error path.

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by James Smart <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/lpfc/lpfc_sli.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

drivers/scsi/lpfc/lpfc_sli.c +7 -1

index d3bad0dbfaf7..7920b8c72caf 100644
@@ -12689,13 +12689,19 @@ send_current_mbox:
 	phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 	/* Setting active mailbox pointer need to be in sync to flag clear */
 	phba->sli.mbox_active = NULL;
+	if (bf_get(lpfc_trailer_consumed, mcqe))
+		lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
 	/* Wake up worker thread to post the next pending mailbox command */
 	lpfc_worker_wake_up(phba);
+	return workposted;
+
 out_no_mqe_complete:
+	spin_lock_irqsave(&phba->hbalock, iflags);
 	if (bf_get(lpfc_trailer_consumed, mcqe))
 		lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
-	return workposted;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return false;
 }
 
 /**

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #4 lore raw

PATCH 4/91 Input: atmel_mxt_ts - disable IRQ across suspend

From: Evan Green <[email protected]>

[ Upstream commit 463fa44eec2fef50d111ed0199cf593235065c04 ]

Across suspend and resume, we are seeing error messages like the following:

atmel_mxt_ts i2c-PRP0001:00: __mxt_read_reg: i2c transfer failed (-121) atmel_mxt_ts i2c-PRP0001:00: Failed to read T44 and T5 (-121)

This occurs because the driver leaves its IRQ enabled. Upon resume, there is an IRQ pending, but the interrupt is serviced before both the driver and the underlying I2C bus have been resumed. This causes EREMOTEIO errors.

Disable the IRQ in suspend, and re-enable it on resume. If there are cases where the driver enters suspend with interrupts disabled, that's a bug we should fix separately.

Signed-off-by Evan Green <[email protected]>

Signed-off-by Dmitry Torokhov <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/input/touchscreen/atmel_mxt_ts.c | 4 ++++
 1 file changed, 4 insertions(+)

drivers/input/touchscreen/atmel_mxt_ts.c +4 -0

index 59aaac43db91..138d1f3b12b2 100644
@@ -3257,6 +3257,8 @@ static int __maybe_unused mxt_suspend(struct device *dev)
 
 	mutex_unlock(&input_dev->mutex);
 
+	disable_irq(data->irq);
+
 	return 0;
 }

@@ -3269,6 +3271,8 @@ static int __maybe_unused mxt_resume(struct device *dev)
 	if (!input_dev)
 		return 0;
 
+	enable_irq(data->irq);
+
 	mutex_lock(&input_dev->mutex);
 
 	if (input_dev->users)

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #5 lore raw

PATCH 5/91 iommu/tegra-smmu: Fix page tables in > 4 GiB memory

From: Thierry Reding <[email protected]>

[ Upstream commit 96d3ab802e4930a29a33934373157d6dff1b2c7e ]

Page tables that reside in physical memory beyond the 4 GiB boundary are currently not working properly. The reason is that when the physical address for page directory entries is read, it gets truncated at 32 bits and can cause crashes when passing that address to the DMA API.

Fix this by first casting the PDE value to a dma_addr_t and then using the page frame number mask for the SMMU instance to mask out the invalid bits, which are typically used for mapping attributes, etc.

Signed-off-by Thierry Reding <[email protected]>

Signed-off-by Joerg Roedel <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/iommu/tegra-smmu.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

drivers/iommu/tegra-smmu.c +6 -5

index 40eb8138546a..848dac3e4580 100644
@@ -156,9 +156,9 @@ static bool smmu_dma_addr_valid(struct tegra_smmu *smmu, dma_addr_t addr)
 	return (addr & smmu->pfn_mask) == addr;
 }
 
-static dma_addr_t smmu_pde_to_dma(u32 pde)
+static dma_addr_t smmu_pde_to_dma(struct tegra_smmu *smmu, u32 pde)
 {
-	return pde << 12;
+	return (dma_addr_t)(pde & smmu->pfn_mask) << 12;
 }
 
 static void smmu_flush_ptc_all(struct tegra_smmu *smmu)

@@ -543,6 +543,7 @@ static u32 *tegra_smmu_pte_lookup(struct tegra_smmu_as *as, unsigned long iova,
 				  dma_addr_t *dmap)
 {
 	unsigned int pd_index = iova_pd_index(iova);
+	struct tegra_smmu *smmu = as->smmu;
 	struct page *pt_page;
 	u32 *pd;

@@ -551,7 +552,7 @@ static u32 *tegra_smmu_pte_lookup(struct tegra_smmu_as *as, unsigned long iova,
 		return NULL;
 
 	pd = page_address(as->pd);
-	*dmap = smmu_pde_to_dma(pd[pd_index]);
+	*dmap = smmu_pde_to_dma(smmu, pd[pd_index]);
 
 	return tegra_smmu_pte_offset(pt_page, iova);
 }

@@ -593,7 +594,7 @@ static u32 *as_get_pte(struct tegra_smmu_as *as, dma_addr_t iova,
 	} else {
 		u32 *pd = page_address(as->pd);
 
-		*dmap = smmu_pde_to_dma(pd[pde]);
+		*dmap = smmu_pde_to_dma(smmu, pd[pde]);
 	}
 
 	return tegra_smmu_pte_offset(as->pts[pde], iova);

@@ -618,7 +619,7 @@ static void tegra_smmu_pte_put_use(struct tegra_smmu_as *as, unsigned long iova)
 	if (--as->count[pde] == 0) {
 		struct tegra_smmu *smmu = as->smmu;
 		u32 *pd = page_address(as->pd);
-		dma_addr_t pte_dma = smmu_pde_to_dma(pd[pde]);
+		dma_addr_t pte_dma = smmu_pde_to_dma(smmu, pd[pde]);
 
 		tegra_smmu_set_pde(as, iova, 0);

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #6 lore raw

PATCH 6/91 scsi: target: compare full CHAP_A Algorithm strings

From: David Disseldorp <[email protected]>

[ Upstream commit 9cef2a7955f2754257a7cddedec16edae7b587d0 ]

RFC 2307 states:

For CHAP [RFC1994], in the first step, the initiator MUST send:

      CHAP_A=<A1,A2...>

Where A1,A2... are proposed algorithms, in order of preference.
...
For the Algorithm, as stated in [RFC1994], one value is required to be implemented:

5 (CHAP with MD5)

LIO currently checks for this value by only comparing a single byte in the tokenized Algorithm string, which means that any value starting with a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by comparing the entire tokenized string.

Reviewed-by Lee Duncan <[email protected]>

Reviewed-by Mike Christie <[email protected]>

Signed-off-by David Disseldorp <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/target/iscsi/iscsi_target_auth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/target/iscsi/iscsi_target_auth.c +1 -1

index e2fa3a3bc81d..b6bf605fa5c1 100644
@@ -78,7 +78,7 @@ static int chap_check_algorithm(const char *a_str)
 		if (!token)
 			goto out;
 
-		if (!strncmp(token, "5", 1)) {
+		if (!strcmp(token, "5")) {
 			pr_debug("Selected MD5 Algorithm\n");
 			kfree(orig);
 			return CHAP_DIGEST_MD5;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #7 lore raw

PATCH 7/91 scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices

From: James Smart <[email protected]>

[ Upstream commit feff8b3d84d3d9570f893b4d83e5eab6693d6a52 ]

When operating in private loop mode, PLOGI exchanges are racing and the driver tries to abort it's PLOGI. But the PLOGI abort ends up terminating the login with the other end causing the other end to abort its PLOGI as well. Discovery never fully completes.

Fix by disabling the PLOGI abort when private loop and letting the state machine play out.

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by James Smart <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/lpfc/lpfc_nportdisc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

drivers/scsi/lpfc/lpfc_nportdisc.c +3 -1

index 043bca6449cd..96411754aa43 100644
@@ -483,8 +483,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	 * single discovery thread, this will cause a huge delay in
 	 * discovery. Also this will cause multiple state machines
 	 * running in parallel for this node.
+	 * This only applies to a fabric environment.
 	 */
-	if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) {
+	if ((ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) &&
+	    (vport->fc_flag & FC_FABRIC)) {
 		/* software abort outstanding PLOGI */
 		lpfc_els_abort(phba, ndlp);
 	}

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #8 lore raw

PATCH 8/91 scsi: csiostor: Dont enable IRQs too early

Link https://lore.kernel.org/r/20191019085913.GA14245@mwanda open here

From: Dan Carpenter <[email protected]>

[ Upstream commit d6c9b31ac3064fbedf8961f120a4c117daa59932 ]

These are called with IRQs disabled from csio_mgmt_tmo_handler() so we can't call spin_unlock_irq() or it will enable IRQs prematurely.

Fixes a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")

Signed-off-by Dan Carpenter <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/csiostor/csio_lnode.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

drivers/scsi/csiostor/csio_lnode.c +9 -6

index be5ee2d37815..957767d38361 100644
@@ -301,6 +301,7 @@ csio_ln_fdmi_rhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	struct fc_fdmi_port_name *port_name;
 	uint8_t buf[64];
 	uint8_t *fc4_type;
+	unsigned long flags;
 
 	if (fdmi_req->wr_status != FW_SUCCESS) {
 		csio_ln_dbg(ln, "WR error:%x in processing fdmi rhba cmd\n",

@@ -377,13 +378,13 @@ csio_ln_fdmi_rhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	len = (uint32_t)(pld - (uint8_t *)cmd);
 
 	/* Submit FDMI RPA request */
-	spin_lock_irq(&hw->lock);
+	spin_lock_irqsave(&hw->lock, flags);
 	if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_done,
 				FCOE_CT, &fdmi_req->dma_buf, len)) {
 		CSIO_INC_STATS(ln, n_fdmi_err);
 		csio_ln_dbg(ln, "Failed to issue fdmi rpa req\n");
 	}
-	spin_unlock_irq(&hw->lock);
+	spin_unlock_irqrestore(&hw->lock, flags);
 }
 
 /*

@@ -404,6 +405,7 @@ csio_ln_fdmi_dprt_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	struct fc_fdmi_rpl *reg_pl;
 	struct fs_fdmi_attrs *attrib_blk;
 	uint8_t buf[64];
+	unsigned long flags;
 
 	if (fdmi_req->wr_status != FW_SUCCESS) {
 		csio_ln_dbg(ln, "WR error:%x in processing fdmi dprt cmd\n",

@@ -483,13 +485,13 @@ csio_ln_fdmi_dprt_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	attrib_blk->numattrs = htonl(numattrs);
 
 	/* Submit FDMI RHBA request */
-	spin_lock_irq(&hw->lock);
+	spin_lock_irqsave(&hw->lock, flags);
 	if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_rhba_cbfn,
 				FCOE_CT, &fdmi_req->dma_buf, len)) {
 		CSIO_INC_STATS(ln, n_fdmi_err);
 		csio_ln_dbg(ln, "Failed to issue fdmi rhba req\n");
 	}
-	spin_unlock_irq(&hw->lock);
+	spin_unlock_irqrestore(&hw->lock, flags);
 }
 
 /*

@@ -504,6 +506,7 @@ csio_ln_fdmi_dhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	void *cmd;
 	struct fc_fdmi_port_name *port_name;
 	uint32_t len;
+	unsigned long flags;
 
 	if (fdmi_req->wr_status != FW_SUCCESS) {
 		csio_ln_dbg(ln, "WR error:%x in processing fdmi dhba cmd\n",

@@ -534,13 +537,13 @@ csio_ln_fdmi_dhba_cbfn(struct csio_hw *hw, struct csio_ioreq *fdmi_req)
 	len += sizeof(*port_name);
 
 	/* Submit FDMI request */
-	spin_lock_irq(&hw->lock);
+	spin_lock_irqsave(&hw->lock, flags);
 	if (csio_ln_mgmt_submit_req(fdmi_req, csio_ln_fdmi_dprt_cbfn,
 				FCOE_CT, &fdmi_req->dma_buf, len)) {
 		CSIO_INC_STATS(ln, n_fdmi_err);
 		csio_ln_dbg(ln, "Failed to issue fdmi dprt req\n");
 	}
-	spin_unlock_irq(&hw->lock);
+	spin_unlock_irqrestore(&hw->lock, flags);
 }
 
 /**

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:51 UTC #9 lore raw

PATCH 9/91 powerpc/pseries: Mark accumulate_stolen_time() as notrace

From: Michael Ellerman <[email protected]>

[ Upstream commit eb8e20f89093b64f48975c74ccb114e6775cee22 ]

accumulate_stolen_time() is called prior to interrupt state being reconciled, which can trip the warning in arch_local_irq_restore():

  WARNING: CPU: 5 PID: 1017 at arch/powerpc/kernel/irq.c:258 .arch_local_irq_restore+0x9c/0x130
  ...
  NIP .arch_local_irq_restore+0x9c/0x130
  LR  .rb_start_commit+0x38/0x80
  Call Trace:
    .ring_buffer_lock_reserve+0xe4/0x620
    .trace_function+0x44/0x210
    .function_trace_call+0x148/0x170
    .ftrace_ops_no_ops+0x180/0x1d0
    ftrace_call+0x4/0x8
    .accumulate_stolen_time+0x1c/0xb0
    decrementer_common+0x124/0x160

For now just mark it as notrace. We may change the ordering to call it after interrupt state has been reconciled, but that is a larger change.

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/kernel/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

arch/powerpc/kernel/time.c +1 -1

index 14f3f28a089e..66a9987dc0f8 100644
@@ -241,7 +241,7 @@ static u64 scan_dispatch_log(u64 stop_tb)
  * Accumulate stolen time by scanning the dispatch trace log.
  * Called on entry from user mode.
  */
-void accumulate_stolen_time(void)
+void notrace accumulate_stolen_time(void)
 {
 	u64 sst, ust;
 	u8 save_soft_enabled = local_paca->soft_enabled;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:23 UTC #10 lore raw

PATCH 10/91 powerpc/pseries: Dont fail hash page table insert for bolted mapping

From: Aneesh Kumar K.V <[email protected]>

[ Upstream commit 75838a3290cd4ebbd1f567f310ba04b6ef017ce4 ]

If the hypervisor returned H_PTEG_FULL for H_ENTER hcall, retry a hash page table insert by removing a random entry from the group.

After some runtime, it is very well possible to find all the 8 hash page table entry slot in the hpte group used for mapping. Don't fail a bolted entry insert in that case. With Storage class memory a user can find this error easily since a namespace enable/disable is equivalent to memory add/remove.

This results in failures as reported below:

$ ndctl create-namespace -r region1 -t pmem -m devdax -a 65536 -s 100M
libndctl: ndctl_dax_enable: dax1.3: failed to enable
  Error: namespace1.2: failed to enable

failed to create namespace: No such device or address

In kernel log we find the details as below:

Unable to create mapping for hot added memory 0xc000042006000000..0xc00004200d000000: -1
dax_pmem: probe of dax1.3 failed with error -14

This indicates that we failed to create a bolted hash table entry for direct-map address backing the namespace.

We also observe failures such that not all namespaces will be enabled with ndctl enable-namespace all command.

Signed-off-by Aneesh Kumar K.V <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/mm/hash_utils_64.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

arch/powerpc/mm/hash_utils_64.c +8 -1

index 58c14749bb0c..cf1d76e03635 100644
@@ -292,7 +292,14 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 		ret = mmu_hash_ops.hpte_insert(hpteg, vpn, paddr, tprot,
 					       HPTE_V_BOLTED, psize, psize,
 					       ssize);
-
+		if (ret == -1) {
+			/* Try to remove a non bolted entry */
+			ret = mmu_hash_ops.hpte_remove(hpteg);
+			if (ret != -1)
+				ret = mmu_hash_ops.hpte_insert(hpteg, vpn, paddr, tprot,
+							       HPTE_V_BOLTED, psize, psize,
+							       ssize);
+		}
 		if (ret < 0)
 			break;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:23 UTC #11 lore raw

PATCH 11/91 powerpc/tools: Dont quote $objdump in scripts

From: Michael Ellerman <[email protected]>

[ Upstream commit e44ff9ea8f4c8a90c82f7b85bd4f5e497c841960 ]

Some of our scripts are passed $objdump and then call it as "$objdump". This doesn't work if it contains spaces because we're using ccache, for example you get errors such as:

./arch/powerpc/tools/relocs_check.sh: line 48: ccache ppc64le-objdump: No such file or directory ./arch/powerpc/tools/unrel_branch_check.sh: line 26: ccache ppc64le-objdump: No such file or directory

Fix it by not quoting the string when we expand it, allowing the shell to do the right thing for us.

Fixes a71aa05e1416 ("powerpc: Convert relocs_check to a shell script using grep")

Fixes 4ea80652dc75 ("powerpc/64s: Tool to flag direct branches from unrelocated interrupt vectors")

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/tools/relocs_check.sh       | 2 +-
 arch/powerpc/tools/unrel_branch_check.sh | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

arch/powerpc/tools/relocs_check.sh +1 -1

index ec2d5c835170..d6c16e7faa38 100755
@@ -23,7 +23,7 @@ objdump="$1"
 vmlinux="$2"
 
 bad_relocs=$(
-"$objdump" -R "$vmlinux" |
+$objdump -R "$vmlinux" |
 	# Only look at relocation lines.
 	grep -E '\<R_' |
 	# These relocations are okay

arch/powerpc/tools/unrel_branch_check.sh +2 -2

index 1e972df3107e..77114755dc6f 100755
@@ -18,14 +18,14 @@ vmlinux="$2"
 #__end_interrupts should be located within the first 64K
 
 end_intr=0x$(
-"$objdump" -R "$vmlinux" -d --start-address=0xc000000000000000		\
+$objdump -R "$vmlinux" -d --start-address=0xc000000000000000           \
 		 --stop-address=0xc000000000010000 |
 grep '\<__end_interrupts>:' |
 awk '{print $1}'
 )
 
 BRANCHES=$(
-"$objdump" -R "$vmlinux" -D --start-address=0xc000000000000000		\
+$objdump -R "$vmlinux" -D --start-address=0xc000000000000000           \
 		--stop-address=${end_intr} |
 grep -e "^c[0-9a-f]*:[[:space:]]*\([0-9a-f][0-9a-f][[:space:]]\)\{4\}[[:space:]]*b" |
 grep -v '\<__start_initialization_multiplatform>' |

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:51 UTC #12 lore raw

PATCH 12/91 dma-debug: add a schedule point in debug_dma_dump_mappings()

From: Eric Dumazet <[email protected]>

[ Upstream commit 9ff6aa027dbb98755f0265695354f2dd07c0d1ce ]

debug_dma_dump_mappings() can take a lot of cpu cycles :

lpk43:/# time wc -l /sys/kernel/debug/dma-api/dump
163435 /sys/kernel/debug/dma-api/dump

real 0m0.463s
user 0m0.003s
sys 0m0.459s

Let's add a cond_resched() to avoid holding cpu for too long.

Cc Corentin Labbe <[email protected]>

Cc Christoph Hellwig <[email protected]>

Cc Marek Szyprowski <[email protected]>

Signed-off-by Christoph Hellwig <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 lib/dma-debug.c | 1 +
 1 file changed, 1 insertion(+)

lib/dma-debug.c +1 -0

index ea4cc3dde4f1..61e7240947f5 100644
@@ -437,6 +437,7 @@ void debug_dma_dump_mappings(struct device *dev)
 		}
 
 		spin_unlock_irqrestore(&bucket->lock, flags);
+		cond_resched();
 	}
 }
 EXPORT_SYMBOL(debug_dma_dump_mappings);

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:23 UTC #13 lore raw

PATCH 13/91 clocksource/drivers/asm9260: Add a check for of_clk_get

From: Chuhong Yuan <[email protected]>

[ Upstream commit 6e001f6a4cc73cd06fc7b8c633bc4906c33dd8ad ]

asm9260_timer_init misses a check for of_clk_get.
Add a check for it and print errors like other clocksource drivers.

Signed-off-by Chuhong Yuan <[email protected]>

Signed-off-by Daniel Lezcano <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/clocksource/asm9260_timer.c | 4 ++++
 1 file changed, 4 insertions(+)

drivers/clocksource/asm9260_timer.c +4 -0

index 38cd2feb87c4..0ce760776406 100644
@@ -198,6 +198,10 @@ static int __init asm9260_timer_init(struct device_node *np)
 	}
 
 	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get clk!\n");
+		return PTR_ERR(clk);
+	}
 
 	ret = clk_prepare_enable(clk);
 	if (ret) {

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:23 UTC #14 lore raw

PATCH 14/91 powerpc/security/book3s64: Report L1TF status in sysfs

From: Anthony Steinhauser <[email protected]>

[ Upstream commit 8e6b6da91ac9b9ec5a925b6cb13f287a54bd547d ]

Some PowerPC CPUs are vulnerable to L1TF to the same extent as to Meltdown. It is also mitigated by flushing the L1D on privilege transition.

Currently the sysfs gives a false negative on L1TF on CPUs that I verified to be vulnerable, a Power9 Talos II Boston 004e 1202, PowerNV T2P9D01.

Signed-off-by Anthony Steinhauser <[email protected]>

[mpe: Just have cpu_show_l1tf() call cpu_show_meltdown() directly]

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/kernel/security.c | 5 +++++
 1 file changed, 5 insertions(+)

arch/powerpc/kernel/security.c +5 -0

index f5d6541bf8c2..fef3f09fc238 100644
@@ -160,6 +160,11 @@ ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, cha
 
 	return sprintf(buf, "Vulnerable\n");
 }
+
+ssize_t cpu_show_l1tf(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return cpu_show_meltdown(dev, attr, buf);
+}
 #endif
 
 ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf)

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:23 UTC #15 lore raw

PATCH 15/91 powerpc/book3s64/hash: Add cond_resched to avoid soft lockup warning

From: Aneesh Kumar K.V <[email protected]>

[ Upstream commit 16f6b67cf03cb43db7104acb2ca877bdc2606c92 ]

With large memory (8TB and more) hotplug, we can get soft lockup warnings as below. These were caused by a long loop without any explicit cond_resched which is a problem for !PREEMPT kernels.

Avoid this using cond_resched() while inserting hash page table entries. We already do similar cond_resched() in __add_pages(), see commit f64ac5e6e306 ("mm, memory_hotplug: add scheduling point to __add_pages").

rcu: 3-....: (24002 ticks this GP) idle=13e/1/0x4000000000000002 softirq=722/722 fqs=12001
(t=24003 jiffies g=4285 q=2002)
NMI backtrace for cpu 3

  CPU: 3 PID: 3870 Comm: ndctl Not tainted 5.3.0-197.18-default+ #2
  Call Trace:
    dump_stack+0xb0/0xf4 (unreliable)
    nmi_cpu_backtrace+0x124/0x130
    nmi_trigger_cpumask_backtrace+0x1ac/0x1f0
    arch_trigger_cpumask_backtrace+0x28/0x3c
    rcu_dump_cpu_stacks+0xf8/0x154
    rcu_sched_clock_irq+0x878/0xb40
    update_process_times+0x48/0x90
    tick_sched_handle.isra.16+0x4c/0x80
    tick_sched_timer+0x68/0xe0
    __hrtimer_run_queues+0x180/0x430
    hrtimer_interrupt+0x110/0x300
    timer_interrupt+0x108/0x2f0
    decrementer_common+0x114/0x120
  --- interrupt: 901 at arch_add_memory+0xc0/0x130
      LR = arch_add_memory+0x74/0x130
    memremap_pages+0x494/0x650
    devm_memremap_pages+0x3c/0xa0
    pmem_attach_disk+0x188/0x750
    nvdimm_bus_probe+0xac/0x2c0
    really_probe+0x148/0x570
    driver_probe_device+0x19c/0x1d0
    device_driver_attach+0xcc/0x100
    bind_store+0x134/0x1c0
    drv_attr_store+0x44/0x60
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1a0/0x270
    __vfs_write+0x3c/0x70
    vfs_write+0xd0/0x260
    ksys_write+0xdc/0x130
    system_call+0x5c/0x68

Signed-off-by Aneesh Kumar K.V <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/mm/hash_utils_64.c | 1 +
 1 file changed, 1 insertion(+)

arch/powerpc/mm/hash_utils_64.c +1 -0

index cf1d76e03635..387600ecea60 100644
@@ -303,6 +303,7 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 		if (ret < 0)
 			break;
 
+		cond_resched();
 #ifdef CONFIG_DEBUG_PAGEALLOC
 		if (debug_pagealloc_enabled() &&
 			(paddr >> PAGE_SHIFT) < linear_map_hash_count)

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:23 UTC #16 lore raw

PATCH 16/91 ext4: update direct I/O read lock pattern for IOCB_NOWAIT

Link https://lore.kernel.org/r/c5d5e759f91747359fbd2c6f9a36240cf75ad79f.1572949325.git.mbobrowski@mbobrowski.org open here

From: Matthew Bobrowski <[email protected]>

[ Upstream commit 548feebec7e93e58b647dba70b3303dcb569c914 ]

This patch updates the lock pattern in ext4_direct_IO_read() to not block on inode lock in cases of IOCB_NOWAIT direct I/O reads. The locking condition implemented here is similar to that of 942491c9e6d6 ("xfs: fix AIM7 regression").

Fixes 16c54688592c ("ext4: Allow parallel DIO reads")

Signed-off-by Matthew Bobrowski <[email protected]>

Reviewed-by Jan Kara <[email protected]>

Reviewed-by Ritesh Harjani <[email protected]>

Signed-off-by Theodore Ts'o <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/ext4/inode.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

fs/ext4/inode.c +7 -1

index c2920cbfa3bf..a91b8404d3dc 100644
@@ -3796,7 +3796,13 @@ static ssize_t ext4_direct_IO_read(struct kiocb *iocb, struct iov_iter *iter)
 	 * writes & truncates and since we take care of writing back page cache,
 	 * we are protected against page writeback as well.
 	 */
-	inode_lock_shared(inode);
+	if (iocb->ki_flags & IOCB_NOWAIT) {
+		if (!inode_trylock_shared(inode))
+			return -EAGAIN;
+	} else {
+		inode_lock_shared(inode);
+	}
+
 	ret = filemap_write_and_wait_range(mapping, iocb->ki_pos,
 					   iocb->ki_pos + count - 1);
 	if (ret)

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:51 UTC #17 lore raw

PATCH 17/91 jbd2: Fix statistics for the number of logged blocks

From: Jan Kara <[email protected]>

[ Upstream commit 015c6033068208d6227612c878877919f3fcf6b6 ]

jbd2 statistics counting number of blocks logged in a transaction was wrong. It didn't count the commit block and more importantly it didn't count revoke descriptor blocks. Make sure these get properly counted.

Reviewed-by Theodore Ts'o <[email protected]>

Signed-off-by Jan Kara <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Theodore Ts'o <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/jbd2/commit.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

fs/jbd2/commit.c +3 -1

index 0567b17a970c..7dd613392592 100644
@@ -726,7 +726,6 @@ start_journal_io:
 				submit_bh(REQ_OP_WRITE, REQ_SYNC, bh);
 			}
 			cond_resched();
-			stats.run.rs_blocks_logged += bufs;
 
 			/* Force a new descriptor to be generated next
                            time round the loop. */

@@ -813,6 +812,7 @@ start_journal_io:
 		if (unlikely(!buffer_uptodate(bh)))
 			err = -EIO;
 		jbd2_unfile_log_bh(bh);
+		stats.run.rs_blocks_logged++;
 
 		/*
 		 * The list contains temporary buffer heads created by

@@ -858,6 +858,7 @@ start_journal_io:
 		BUFFER_TRACE(bh, "ph5: control buffer writeout done: unfile");
 		clear_buffer_jwrite(bh);
 		jbd2_unfile_log_bh(bh);
+		stats.run.rs_blocks_logged++;
 		__brelse(bh);		/* One for getblk */
 		/* AKPM: bforget here */
 	}

@@ -879,6 +880,7 @@ start_journal_io:
 	}
 	if (cbh)
 		err = journal_wait_on_commit_record(journal, cbh);
+	stats.run.rs_blocks_logged++;
 	if (jbd2_has_feature_async_commit(journal) &&
 	    journal->j_flags & JBD2_BARRIER) {
 		blkdev_issue_flush(journal->j_dev, GFP_NOFS, NULL);

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:23 UTC #18 lore raw

PATCH 18/91 scsi: tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6)

From: Bart Van Assche <[email protected]>

[ Upstream commit f6b8540f40201bff91062dd64db8e29e4ddaaa9d ]

According to SBC-2 a TRANSFER LENGTH field of zero means that 256 logical blocks must be transferred. Make the SCSI tracing code follow SBC-2.

Fixes bf8162354233 ("[SCSI] add scsi trace core functions and put trace points")

Cc Christoph Hellwig <[email protected]>

Cc Hannes Reinecke <[email protected]>

Cc Douglas Gilbert <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Bart Van Assche <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/scsi_trace.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

drivers/scsi/scsi_trace.c +7 -4

index 0ff083bbf5b1..617a60737590 100644
@@ -30,15 +30,18 @@ static const char *
 scsi_trace_rw6(struct trace_seq *p, unsigned char *cdb, int len)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
-	sector_t lba = 0, txlen = 0;
+	u32 lba = 0, txlen;
 
 	lba |= ((cdb[1] & 0x1F) << 16);
 	lba |=  (cdb[2] << 8);
 	lba |=   cdb[3];
-	txlen = cdb[4];
+	/*
+	 * From SBC-2: a TRANSFER LENGTH field set to zero specifies that 256
+	 * logical blocks shall be read (READ(6)) or written (WRITE(6)).
+	 */
+	txlen = cdb[4] ? cdb[4] : 256;
 
-	trace_seq_printf(p, "lba=%llu txlen=%llu",
-			 (unsigned long long)lba, (unsigned long long)txlen);
+	trace_seq_printf(p, "lba=%u txlen=%u", lba, txlen);
 	trace_seq_putc(p, 0);
 
 	return ret;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:23 UTC #19 lore raw

PATCH 19/91 scsi: lpfc: Fix duplicate unreg_rpi error in port offline flow

From: James Smart <[email protected]>

[ Upstream commit 7cfd5639d99bec0d27af089d0c8c114330e43a72 ]

If the driver receives a login that is later then LOGO'd by the remote port (aka ndlp), the driver, upon the completion of the LOGO ACC transmission, will logout the node and unregister the rpi that is being used for the node. As part of the unreg, the node's rpi value is replaced by the LPFC_RPI_ALLOC_ERROR value. If the port is subsequently offlined, the offline walks the nodes and ensures they are logged out, which possibly entails unreg'ing their rpi values. This path does not validate the node's rpi value, thus doesn't detect that it has been unreg'd already. The replaced rpi value is then used when accessing the rpi bitmask array which tracks active rpi values. As the LPFC_RPI_ALLOC_ERROR value is not a valid index for the bitmask, it may fault the system.

Revise the rpi release code to detect when the rpi value is the replaced RPI_ALLOC_ERROR value and ignore further release steps.

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by James Smart <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/lpfc/lpfc_sli.c | 7 +++++++
 1 file changed, 7 insertions(+)

drivers/scsi/lpfc/lpfc_sli.c +7 -0

index 7920b8c72caf..d8e0ba68879c 100644
@@ -17492,6 +17492,13 @@ lpfc_sli4_alloc_rpi(struct lpfc_hba *phba)
 static void
 __lpfc_sli4_free_rpi(struct lpfc_hba *phba, int rpi)
 {
+	/*
+	 * if the rpi value indicates a prior unreg has already
+	 * been done, skip the unreg.
+	 */
+	if (rpi == LPFC_RPI_ALLOC_ERROR)
+		return;
+
 	if (test_and_clear_bit(rpi, phba->sli4_hba.rpi_bmask)) {
 		phba->sli4_hba.rpi_count--;
 		phba->sli4_hba.max_cfg_param.rpi_used--;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:51 UTC #20 lore raw

PATCH 20/91 f2fs: fix to update dirs i_pino during cross_rename

From: Chao Yu <[email protected]>

[ Upstream commit 2a60637f06ac94869b2e630eaf837110d39bf291 ]

As Eric reported:

RENAME_EXCHANGE support was just added to fsstress in xfstests:

	commit 65dfd40a97b6bbbd2a22538977bab355c5bc0f06
	Author: kaixuxia <[email protected]>
	Date:   Thu Oct 31 14:41:48 2019 +0800

	    fsstress: add EXCHANGE renameat2 support

This is causing xfstest generic/579 to fail due to fsck.f2fs reporting errors. I'm not sure what the problem is, but it still happens even with all the fs-verity stuff in the test commented out, so that the test just runs fsstress.

generic/579 23s ... [10:02:25]

[    7.745370] run fstests generic/579 at 2019-11-04 10:02:25

_check_generic_filesystem: filesystem on /dev/vdc is inconsistent (see /results/f2fs/results-default/generic/579.full for details)
[10:02:47]
Ran: generic/579
Failures: generic/579
Failed 1 of 1 tests
Xunit report: /results/f2fs/results-default/result.xml

Here's the contents of 579.full:

_check_generic_filesystem: filesystem on /dev/vdc is inconsistent
*** fsck.f2fs output ***
[ASSERT] (__chk_dots_dentries:1378) --> Bad inode number[0x24] for '..', parent parent ino is [0xd10]

The root cause is that we forgot to update directory's i_pino during cross_rename, fix it.

Fixes 32f9bc25cbda0 ("f2fs: support ->rename2()")

Signed-off-by Chao Yu <[email protected]>

Tested-by Eric Biggers <[email protected]>

Signed-off-by Jaegeuk Kim <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/f2fs/namei.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

fs/f2fs/namei.c +12 -3

index b80e7db3b55b..b13383948fca 100644
@@ -862,7 +862,8 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	if (!old_dir_entry || whiteout)
 		file_lost_pino(old_inode);
 	else
-		F2FS_I(old_inode)->i_pino = new_dir->i_ino;
+		/* adjust dir's i_pino to pass fsck check */
+		f2fs_i_pino_write(old_inode, new_dir->i_ino);
 	up_write(&F2FS_I(old_inode)->i_sem);
 
 	old_inode->i_ctime = current_time(old_inode);

@@ -1027,7 +1028,11 @@ static int f2fs_cross_rename(struct inode *old_dir, struct dentry *old_dentry,
 	f2fs_set_link(old_dir, old_entry, old_page, new_inode);
 
 	down_write(&F2FS_I(old_inode)->i_sem);
-	file_lost_pino(old_inode);
+	if (!old_dir_entry)
+		file_lost_pino(old_inode);
+	else
+		/* adjust dir's i_pino to pass fsck check */
+		f2fs_i_pino_write(old_inode, new_dir->i_ino);
 	up_write(&F2FS_I(old_inode)->i_sem);
 
 	old_dir->i_ctime = current_time(old_dir);

@@ -1042,7 +1047,11 @@ static int f2fs_cross_rename(struct inode *old_dir, struct dentry *old_dentry,
 	f2fs_set_link(new_dir, new_entry, new_page, old_inode);
 
 	down_write(&F2FS_I(new_inode)->i_sem);
-	file_lost_pino(new_inode);
+	if (!new_dir_entry)
+		file_lost_pino(new_inode);
+	else
+		/* adjust dir's i_pino to pass fsck check */
+		f2fs_i_pino_write(new_inode, old_dir->i_ino);
 	up_write(&F2FS_I(new_inode)->i_sem);
 
 	new_dir->i_ctime = current_time(new_dir);

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #21 lore raw

PATCH 21/91 clk: qcom: Allow constant ratio freq tables for rcg

From: Jeffrey Hugo <[email protected]>

[ Upstream commit efd164b5520afd6fb2883b68e0d408a7de29c491 ]

Some RCGs (the gfx_3d_src_clk in msm8998 for example) are basically just some constant ratio from the input across the entire frequency range. It would be great if we could specify the frequency table as a single entry constant ratio instead of a long list, ie:

	{ .src = P_GPUPLL0_OUT_EVEN, .pre_div = 3 },
        { }

So, lets support that.

We need to fix a corner case in qcom_find_freq() where if the freq table is non-null, but has no frequencies, we end up returning an "entry" before the table array, which is bad. Then, we need ignore the freq from the table, and instead base everything on the requested freq.

Signed-off-by Jeffrey Hugo <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Stephen Boyd <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/clk/qcom/clk-rcg2.c | 2 ++
 drivers/clk/qcom/common.c   | 3 +++
 2 files changed, 5 insertions(+)

drivers/clk/qcom/clk-rcg2.c +2 -0

index 1a0985ae20d2..a93439242565 100644
@@ -212,6 +212,8 @@ static int _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f,
 	p = clk_hw_get_parent_by_index(hw, index);
 	if (clk_flags & CLK_SET_RATE_PARENT) {
 		if (f->pre_div) {
+			if (!rate)
+				rate = req->rate;
 			rate /= 2;
 			rate *= f->pre_div + 1;
 		}

drivers/clk/qcom/common.c +3 -0

index 28ceaf1e9937..ae9352f7706d 100644
@@ -37,6 +37,9 @@ struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, unsigned long rate)
 	if (!f)
 		return NULL;
 
+	if (!f->freq)
+		return f;
+
 	for (; f->freq; f++)
 		if (rate <= f->freq)
 			return f;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #22 lore raw

PATCH 22/91 irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary

From: Florian Fainelli <[email protected]>

[ Upstream commit 27eebb60357ed5aa6659442f92907c0f7368d6ae ]

If the 'brcm,irq-can-wake' property is specified, make sure we also enable the corresponding parent interrupt we are attached to.

Signed-off-by Florian Fainelli <[email protected]>

Signed-off-by Marc Zyngier <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/irqchip/irq-bcm7038-l1.c | 4 ++++
 1 file changed, 4 insertions(+)

drivers/irqchip/irq-bcm7038-l1.c +4 -0

index 0b9a8b709abf..b32988cac80c 100644
@@ -284,6 +284,10 @@ static int __init bcm7038_l1_init_one(struct device_node *dn,
 		pr_err("failed to map parent interrupt %d\n", parent_irq);
 		return -EINVAL;
 	}
+
+	if (of_property_read_bool(dn, "brcm,irq-can-wake"))
+		enable_irq_wake(parent_irq);
+
 	irq_set_chained_handler_and_data(parent_irq, bcm7038_l1_irq_handle,
 					 intc);

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #23 lore raw

PATCH 23/91 irqchip: ingenic: Error out if IRQ domain creation failed

From: Paul Cercueil <[email protected]>

[ Upstream commit 52ecc87642f273a599c9913b29fd179c13de457b ]

If we cannot create the IRQ domain, the driver should fail to probe instead of succeeding with just a warning message.

Signed-off-by Paul Cercueil <[email protected]>

Signed-off-by Marc Zyngier <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/irqchip/irq-ingenic.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

drivers/irqchip/irq-ingenic.c +10 -5

index fc5953dea509..b2e16dca76a6 100644
@@ -117,6 +117,14 @@ static int __init ingenic_intc_of_init(struct device_node *node,
 		goto out_unmap_irq;
 	}
 
+	domain = irq_domain_add_legacy(node, num_chips * 32,
+				       JZ4740_IRQ_BASE, 0,
+				       &irq_domain_simple_ops, NULL);
+	if (!domain) {
+		err = -ENOMEM;
+		goto out_unmap_base;
+	}
+
 	for (i = 0; i < num_chips; i++) {
 		/* Mask all irqs */
 		writel(0xffffffff, intc->base + (i * CHIP_SIZE) +

@@ -143,14 +151,11 @@ static int __init ingenic_intc_of_init(struct device_node *node,
 				       IRQ_NOPROBE | IRQ_LEVEL);
 	}
 
-	domain = irq_domain_add_legacy(node, num_chips * 32, JZ4740_IRQ_BASE, 0,
-				       &irq_domain_simple_ops, NULL);
-	if (!domain)
-		pr_warn("unable to register IRQ domain\n");
-
 	setup_irq(parent_irq, &intc_cascade_action);
 	return 0;
 
+out_unmap_base:
+	iounmap(intc->base);
 out_unmap_irq:
 	irq_dispose_mapping(parent_irq);
 out_free:

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:51 UTC #24 lore raw

PATCH 24/91 mfd: mfd-core: Honour Device Trees request to disable a child-device

Link https://www.spinics.net/lists/arm-kernel/msg366309.html

From: Lee Jones <[email protected]>

[ Upstream commit 6b5c350648b857047b47acf74a57087ad27d6183 ]

Until now, MFD has assumed all child devices passed to it (via mfd_cells) are to be registered. It does not take into account requests from Device Tree and the like to disable child devices on a per-platform basis.

Well now it does.

Link https://lkml.org/lkml/2019/8/22/1350

Reported-by Barry Song <[email protected]>

Reported-by Stephan Gerhold <[email protected]>

Reviewed-by Daniel Thompson <[email protected]>

Reviewed-by Mark Brown <[email protected]>

Tested-by Stephan Gerhold <[email protected]>

Signed-off-by Lee Jones <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/mfd/mfd-core.c | 5 +++++
 1 file changed, 5 insertions(+)

drivers/mfd/mfd-core.c +5 -0

index 5c8ed2150c8b..fae7bfe7a21a 100644
@@ -178,6 +178,11 @@ static int mfd_add_device(struct device *parent, int id,
 	if (parent->of_node && cell->of_compatible) {
 		for_each_child_of_node(parent->of_node, np) {
 			if (of_device_is_compatible(np, cell->of_compatible)) {
+				if (!of_device_is_available(np)) {
+					/* Ignore disabled devices error free */
+					ret = 0;
+					goto fail_alias;
+				}
 				pdev->dev.of_node = np;
 				pdev->dev.fwnode = &np->fwnode;
 				break;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #25 lore raw

PATCH 25/91 fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long

Link https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzz open here

From: Konstantin Khlebnikov <[email protected]>

[ Upstream commit 6fcbcec9cfc7b3c6a2c1f1a23ebacedff7073e0a ]

Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu fractions as signed 64-bit int, filters negative values and then reports lower half as signed 32-bit int.

Result may looks like:

fs.quota.allocated_dquots = 22327
fs.quota.cache_hits = -489852115
fs.quota.drops = -487288718
fs.quota.free_dquots = 22083
fs.quota.lookups = -486883485
fs.quota.reads = 22327
fs.quota.syncs = 335064
fs.quota.writes = 3088689

Values bigger than 2^31-1 reported as negative.

All counters except "allocated_dquots" and "free_dquots" are monotonic, thus they should be reported as is without filtering negative values.

Kernel doesn't have generic helper for 64-bit sysctl yet, let's use at least unsigned long.

Signed-off-by Konstantin Khlebnikov <[email protected]>

Signed-off-by Jan Kara <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/quota/dquot.c      | 29 +++++++++++++++++------------
 include/linux/quota.h |  2 +-
 2 files changed, 18 insertions(+), 13 deletions(-)

fs/quota/dquot.c +17 ~~-12~~

index 3254c90fd899..3fdbdd29702b 100644
@@ -2849,68 +2849,73 @@ EXPORT_SYMBOL(dquot_quotactl_sysfile_ops);
 static int do_proc_dqstats(struct ctl_table *table, int write,
 		     void __user *buffer, size_t *lenp, loff_t *ppos)
 {
-	unsigned int type = (int *)table->data - dqstats.stat;
+	unsigned int type = (unsigned long *)table->data - dqstats.stat;
+	s64 value = percpu_counter_sum(&dqstats.counter[type]);
+
+	/* Filter negative values for non-monotonic counters */
+	if (value < 0 && (type == DQST_ALLOC_DQUOTS ||
+			  type == DQST_FREE_DQUOTS))
+		value = 0;
 
 	/* Update global table */
-	dqstats.stat[type] =
-			percpu_counter_sum_positive(&dqstats.counter[type]);
-	return proc_dointvec(table, write, buffer, lenp, ppos);
+	dqstats.stat[type] = value;
+	return proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
 }
 
 static struct ctl_table fs_dqstats_table[] = {
 	{
 		.procname	= "lookups",
 		.data		= &dqstats.stat[DQST_LOOKUPS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "drops",
 		.data		= &dqstats.stat[DQST_DROPS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "reads",
 		.data		= &dqstats.stat[DQST_READS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "writes",
 		.data		= &dqstats.stat[DQST_WRITES],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "cache_hits",
 		.data		= &dqstats.stat[DQST_CACHE_HITS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "allocated_dquots",
 		.data		= &dqstats.stat[DQST_ALLOC_DQUOTS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "free_dquots",
 		.data		= &dqstats.stat[DQST_FREE_DQUOTS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},
 	{
 		.procname	= "syncs",
 		.data		= &dqstats.stat[DQST_SYNCS],
-		.maxlen		= sizeof(int),
+		.maxlen		= sizeof(unsigned long),
 		.mode		= 0444,
 		.proc_handler	= do_proc_dqstats,
 	},

include/linux/quota.h +1 -1

index 5ac9de4fcd6f..aa9a42eceab0 100644
@@ -263,7 +263,7 @@ enum {
 };
 
 struct dqstats {
-	int stat[_DQST_DQSTAT_LAST];
+	unsigned long stat[_DQST_DQSTAT_LAST];
 	struct percpu_counter counter[_DQST_DQSTAT_LAST];
 };

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #26 lore raw

PATCH 26/91 scsi: lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences

From: James Smart <[email protected]>

[ Upstream commit 6c6d59e0fe5b86cf273d6d744a6a9768c4ecc756 ]

Coverity reported the following:

*** CID 101747: Null pointer dereferences (FORWARD_NULL) /drivers/scsi/lpfc/lpfc_els.c: 4439 in lpfc_cmpl_els_rsp()

4433     			kfree(mp);
4434     		}
4435     		mempool_free(mbox, phba->mbox_mem_pool);
4436     	}
4437     out:
4438     	if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
vvv     CID 101747:  Null pointer dereferences  (FORWARD_NULL)
vvv     Dereferencing null pointer "shost".
4439     		spin_lock_irq(shost->host_lock);
4440     		ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
4441     		spin_unlock_irq(shost->host_lock);

4442
4443 /* If the node is not being used by another discovery thread,
4444 * and we are sending a reject, we are done with it.

Fix by adding a check for non-null shost in line 4438. The scenario when shost is set to null is when ndlp is null. As such, the ndlp check present was sufficient. But better safe than sorry so add the shost check.

Reported-by coverity-bot <[email protected]>

Addresses-Coverity-ID: 101747 ("Null pointer dereferences")

Fixes 2e0fef85e098 ("[SCSI] lpfc: NPIV: split ports")

CC James Bottomley <[email protected]>

CC "Gustavo A. R. Silva" <[email protected]>

CC [email protected]

Link https://lore.kernel.org/r/[email protected] open here

Reviewed-by Ewan D. Milne <[email protected]>

Signed-off-by James Smart <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/lpfc/lpfc_els.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/scsi/lpfc/lpfc_els.c +1 -1

index c851fd14ff3e..4c84c2ae1112 100644
@@ -4102,7 +4102,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		mempool_free(mbox, phba->mbox_mem_pool);
 	}
 out:
-	if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
+	if (ndlp && NLP_CHK_NODE_ACT(ndlp) && shost) {
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI);
 		spin_unlock_irq(shost->host_lock);

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:51 UTC #27 lore raw

PATCH 27/91 scsi: ufs: fix potential bug which ends in system hang

From: Bean Huo <[email protected]>

[ Upstream commit cfcbae3895b86c390ede57b2a8f601dd5972b47b ]

In function __ufshcd_query_descriptor(), in the event of an error happening, we directly goto out_unlock and forget to invaliate hba->dev_cmd.query.descriptor pointer. This results in this pointer still valid in ufshcd_copy_query_response() for other query requests which go through ufshcd_exec_raw_upiu_cmd(). This will cause __memcpy() crash and system hangs. Log as shown below:

Unable to handle kernel paging request at virtual address

ffff000012233c40
Mem abort info:
ESR = 0x96000047
Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000047
CM = 0, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000028cc735c [ffff000012233c40] pgd=00000000bffff003, pud=00000000bfffe003, pmd=00000000ba8b8003, pte=0000000000000000

 Internal error: Oops: 96000047 [#2] PREEMPT SMP
 ...
 Call trace:
  __memcpy+0x74/0x180
  ufshcd_issue_devman_upiu_cmd+0x250/0x3c0
  ufshcd_exec_raw_upiu_cmd+0xfc/0x1a8
  ufs_bsg_request+0x178/0x3b0
  bsg_queue_rq+0xc0/0x118
  blk_mq_dispatch_rq_list+0xb0/0x538
  blk_mq_sched_dispatch_requests+0x18c/0x1d8
  __blk_mq_run_hw_queue+0xb4/0x118
  blk_mq_run_work_fn+0x28/0x38
  process_one_work+0x1ec/0x470
  worker_thread+0x48/0x458
  kthread+0x130/0x138
  ret_from_fork+0x10/0x1c
 Code: 540000ab a8c12027 a88120c7 a8c12027 (a88120c7)
 ---[ end trace 793e1eb5dff69f2d ]---
 note: kworker/0:2H[2054] exited with preempt_count 1

This patch is to move "descriptor = NULL" down to below the label "out_unlock".

Fixes d44a5f98bb49b2(ufs: query descriptor API)

Link https://lore.kernel.org/r/[email protected] open here

Reviewed-by Alim Akhtar <[email protected]>

Reviewed-by Bart Van Assche <[email protected]>

Signed-off-by Bean Huo <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/scsi/ufs/ufshcd.c +1 -1

index 07cae5ea608c..9feae23bfd09 100644
@@ -2867,10 +2867,10 @@ static int __ufshcd_query_descriptor(struct ufs_hba *hba,
 		goto out_unlock;
 	}
 
-	hba->dev_cmd.query.descriptor = NULL;
 	*buf_len = be16_to_cpu(response->upiu_res.length);
 
 out_unlock:
+	hba->dev_cmd.query.descriptor = NULL;
 	mutex_unlock(&hba->dev_cmd.lock);
 out:
 	ufshcd_release(hba);

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #28 lore raw

PATCH 28/91 powerpc/pseries/cmm: Implement release() function for sysfs device

From: David Hildenbrand <[email protected]>

[ Upstream commit 7d8212747435c534c8d564fbef4541a463c976ff ]

When unloading the module, one gets

  ------------[ cut here ]------------
  Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt.
  WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0
  ...

We only have one static fake device. There is nothing to do when releasing the device (via cmm_exit()).

Signed-off-by David Hildenbrand <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/platforms/pseries/cmm.c | 5 +++++
 1 file changed, 5 insertions(+)

arch/powerpc/platforms/pseries/cmm.c +5 -0

index 4ac419c7eb4c..25224c9e1dc0 100644
@@ -425,6 +425,10 @@ static struct bus_type cmm_subsys = {
 	.dev_name = "cmm",
 };
 
+static void cmm_release_device(struct device *dev)
+{
+}
+
 /**
  * cmm_sysfs_register - Register with sysfs
  *

@@ -440,6 +444,7 @@ static int cmm_sysfs_register(struct device *dev)
 
 	dev->id = 0;
 	dev->bus = &cmm_subsys;
+	dev->release = cmm_release_device;
 
 	if ((rc = device_register(dev)))
 		goto subsys_unregister;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #29 lore raw

PATCH 29/91 powerpc/security: Fix wrong message when RFI Flush is disable

From: Gustavo L. F. Walbon <[email protected]>

[ Upstream commit 4e706af3cd8e1d0503c25332b30cad33c97ed442 ]

The issue was showing "Mitigation" message via sysfs whatever the state of "RFI Flush", but it should show "Vulnerable" when it is disabled.

If you have "L1D private" feature enabled and not "RFI Flush" you are vulnerable to meltdown attacks.

"RFI Flush" is the key feature to mitigate the meltdown whatever the "L1D private" state.

SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only.

So the message should be as the truth table shows:

  CPU | L1D private | RFI Flush |                sysfs
  ----|-------------|-----------|-------------------------------------
   P9 |    False    |   False   | Vulnerable
   P9 |    False    |   True    | Mitigation: RFI Flush
   P9 |    True     |   False   | Vulnerable: L1D private per thread
   P9 |    True     |   True    | Mitigation: RFI Flush, L1D private per thread
   P8 |    False    |   False   | Vulnerable
   P8 |    False    |   True    | Mitigation: RFI Flush

Output before this fix:

  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: RFI Flush, L1D private per thread
  # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: L1D private per thread

Output after fix:

  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Mitigation: RFI Flush, L1D private per thread
  # echo 0 > /sys/kernel/debug/powerpc/rfi_flush
  # cat /sys/devices/system/cpu/vulnerabilities/meltdown
  Vulnerable: L1D private per thread

Signed-off-by Gustavo L. F. Walbon <[email protected]>

Signed-off-by Mauro S. M. Rodrigues <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/powerpc/kernel/security.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

arch/powerpc/kernel/security.c +6 ~~-10~~

index fef3f09fc238..b3f540c9f410 100644
@@ -134,26 +134,22 @@ ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, cha
 
 	thread_priv = security_ftr_enabled(SEC_FTR_L1D_THREAD_PRIV);
 
-	if (rfi_flush || thread_priv) {
+	if (rfi_flush) {
 		struct seq_buf s;
 		seq_buf_init(&s, buf, PAGE_SIZE - 1);
 
-		seq_buf_printf(&s, "Mitigation: ");
-
-		if (rfi_flush)
-			seq_buf_printf(&s, "RFI Flush");
-
-		if (rfi_flush && thread_priv)
-			seq_buf_printf(&s, ", ");
-
+		seq_buf_printf(&s, "Mitigation: RFI Flush");
 		if (thread_priv)
-			seq_buf_printf(&s, "L1D private per thread");
+			seq_buf_printf(&s, ", L1D private per thread");
 
 		seq_buf_printf(&s, "\n");
 
 		return s.len;
 	}
 
+	if (thread_priv)
+		return sprintf(buf, "Vulnerable: L1D private per thread\n");
+
 	if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) &&
 	    !security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR))
 		return sprintf(buf, "Not affected\n");

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #30 lore raw

PATCH 30/91 scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE

Link https://lore.kernel.org/r/4567bcae94523b47d6f3b77450ba305823bca479.1572656814.git.fthain@telegraphics.com.au open here

From: Finn Thain <[email protected]>

[ Upstream commit 79172ab20bfd8437b277254028efdb68484e2c21 ]

Since the scsi subsystem adopted the blk-mq API, a host with zero sg_tablesize crashes with a NULL pointer dereference.

blk_queue_max_segments: set to minimum 1
scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
scsi target0:0:0: Beginning Domain Validation
scsi target0:0:0: Domain Validation skipping write tests
scsi target0:0:0: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
scsi target0:0:1: Beginning Domain Validation
scsi target0:0:1: Domain Validation skipping write tests
scsi target0:0:1: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
scsi 0:0:2:0: CD-ROM QEMU QEMU CD-ROM 2.5+ PQ: 0 ANSI: 5
scsi target0:0:2: Beginning Domain Validation
scsi target0:0:2: Domain Validation skipping write tests
scsi target0:0:2: Ending Domain Validation
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
blk_queue_max_segments: set to minimum 1
sr 0:0:2:0: Power-on or device reset occurred
sd 0:0:0:0: Power-on or device reset occurred
sd 0:0:1:0: Power-on or device reset occurred
sd 0:0:0:0: [sda] 10485762 512-byte logical blocks: (5.37 GB/5.00 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Unable to handle kernel NULL pointer dereference at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<001cd874>] blk_mq_free_request+0x66/0xe2
SR: 2004  SP: (ptrval)  a2: 00874520
d0: 00000000    d1: 00000000    d2: 009ba800    d3: 00000000
d4: 00000000    d5: 08000002    a0: 0087be68    a1: 009a81e0

Process kworker/u2:2 (pid: 15, task=(ptrval)) Frame format=7 eff addr=0000007a ssw=0505 faddr=0000007a wb 1 stat/addr/data: 0000 00000000 00000000
wb 2 stat/addr/data: 0000 00000000 00000000
wb 3 stat/addr/data: 0000 0000007a 00000000 push data: 00000000 00000000 00000000 00000000 Stack from 0087bd98:

        00000002 00000000 0087be72 009a7820 0087bdb4 001c4f6c 009a7820 0087bdd4
        0024d200 009a7820 0024d0dc 0087be72 009baa00 0087be68 009a5000 0087be7c
        00265d10 009a5000 0087be72 00000003 00000000 00000000 00000000 0087be68
        00000bb8 00000005 00000000 00000000 00000000 00000000 00265c56 00000000
        009ba60c 0036ddf4 00000002 ffffffff 009baa00 009ba600 009a50d6 0087be74
        00227ba0 009baa08 00000001 009baa08 009ba60c 0036ddf4 00000000 00000000
Call Trace: [<001c4f6c>] blk_put_request+0xe/0x14
 [<0024d200>] __scsi_execute+0x124/0x174
 [<0024d0dc>] __scsi_execute+0x0/0x174
 [<00265d10>] sd_revalidate_disk+0xba/0x1f02
 [<00265c56>] sd_revalidate_disk+0x0/0x1f02
 [<0036ddf4>] strlen+0x0/0x22
 [<00227ba0>] device_add+0x3da/0x604
 [<0036ddf4>] strlen+0x0/0x22
 [<00267e64>] sd_probe+0x30c/0x4b4
 [<0002da44>] process_one_work+0x0/0x402
 [<0022b978>] really_probe+0x226/0x354
 [<0022bc34>] driver_probe_device+0xa4/0xf0
 [<0002da44>] process_one_work+0x0/0x402
 [<0022bcd0>] __driver_attach_async_helper+0x50/0x70
 [<00035dae>] async_run_entry_fn+0x36/0x130
 [<0002db88>] process_one_work+0x144/0x402
 [<0002e1aa>] worker_thread+0x0/0x570
 [<0002e29a>] worker_thread+0xf0/0x570
 [<0002e1aa>] worker_thread+0x0/0x570
 [<003768d8>] schedule+0x0/0xb8
 [<0003f58c>] __init_waitqueue_head+0x0/0x12
 [<00033e92>] kthread+0xc2/0xf6
 [<000331e8>] kthread_parkme+0x0/0x4e
 [<003768d8>] schedule+0x0/0xb8
 [<00033dd0>] kthread+0x0/0xf6
 [<00002c10>] ret_from_kernel_thread+0xc/0x14
Code: 0280 0006 0800 56c0 4400 0280 0000 00ff <52b4> 0c3a 082b 0006 0013 6706 2042 53a8 00c4 4ab9 0047 3374 6640 202d 000c 670c

Disabling lock debugging due to kernel taint

Avoid this by setting sg_tablesize = 1.

Reported-and-tested-by Michael Schmitz <[email protected]>

Reviewed-by Michael Schmitz <[email protected]>

Signed-off-by Finn Thain <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/atari_scsi.c | 6 +++---
 drivers/scsi/mac_scsi.c   | 2 +-
 drivers/scsi/sun3_scsi.c  | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

drivers/scsi/atari_scsi.c +3 -3

index 89f5154c40b6..764c46d7333e 100644
@@ -742,7 +742,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 		atari_scsi_template.sg_tablesize = SG_ALL;
 	} else {
 		atari_scsi_template.can_queue    = 1;
-		atari_scsi_template.sg_tablesize = SG_NONE;
+		atari_scsi_template.sg_tablesize = 1;
 	}
 
 	if (setup_can_queue > 0)

@@ -751,8 +751,8 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 	if (setup_cmd_per_lun > 0)
 		atari_scsi_template.cmd_per_lun = setup_cmd_per_lun;
 
-	/* Leave sg_tablesize at 0 on a Falcon! */
-	if (ATARIHW_PRESENT(TT_SCSI) && setup_sg_tablesize >= 0)
+	/* Don't increase sg_tablesize on Falcon! */
+	if (ATARIHW_PRESENT(TT_SCSI) && setup_sg_tablesize > 0)
 		atari_scsi_template.sg_tablesize = setup_sg_tablesize;
 
 	if (setup_hostid >= 0) {

drivers/scsi/mac_scsi.c +1 -1

index 643321fc152d..b5050c2ede00 100644
@@ -429,7 +429,7 @@ static int __init mac_scsi_probe(struct platform_device *pdev)
 		mac_scsi_template.can_queue = setup_can_queue;
 	if (setup_cmd_per_lun > 0)
 		mac_scsi_template.cmd_per_lun = setup_cmd_per_lun;
-	if (setup_sg_tablesize >= 0)
+	if (setup_sg_tablesize > 0)
 		mac_scsi_template.sg_tablesize = setup_sg_tablesize;
 	if (setup_hostid >= 0)
 		mac_scsi_template.this_id = setup_hostid & 7;

drivers/scsi/sun3_scsi.c +2 -2

index 9492638296c8..af8a7ef9c858 100644
@@ -498,7 +498,7 @@ static struct scsi_host_template sun3_scsi_template = {
 	.eh_host_reset_handler	= sun3scsi_host_reset,
 	.can_queue		= 16,
 	.this_id		= 7,
-	.sg_tablesize		= SG_NONE,
+	.sg_tablesize		= 1,
 	.cmd_per_lun		= 2,
 	.use_clustering		= DISABLE_CLUSTERING,
 	.cmd_size		= NCR5380_CMD_SIZE,

@@ -520,7 +520,7 @@ static int __init sun3_scsi_probe(struct platform_device *pdev)
 		sun3_scsi_template.can_queue = setup_can_queue;
 	if (setup_cmd_per_lun > 0)
 		sun3_scsi_template.cmd_per_lun = setup_cmd_per_lun;
-	if (setup_sg_tablesize >= 0)
+	if (setup_sg_tablesize > 0)
 		sun3_scsi_template.sg_tablesize = setup_sg_tablesize;
 	if (setup_hostid >= 0)
 		sun3_scsi_template.this_id = setup_hostid & 7;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:50 UTC #31 lore raw

PATCH 31/91 clk: pxa: fix one of the pxa RTC clocks

From: Robert Jarzmik <[email protected]>

[ Upstream commit 46acbcb4849b2ca2e6e975e7c8130c1d61c8fd0c ]

The pxa27x platforms have a single IP with 2 drivers, sa1100-rtc and rtc-pxa drivers.

A previous patch fixed the sa1100-rtc case, but the pxa-rtc wasn't fixed. This patch completes the previous one.

Fixes 8b6d10345e16 ("clk: pxa: add missing pxa27x clocks for Irda and sa1100-rtc")

Signed-off-by Robert Jarzmik <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Stephen Boyd <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/clk/pxa/clk-pxa27x.c | 1 +
 1 file changed, 1 insertion(+)

drivers/clk/pxa/clk-pxa27x.c +1 -0

index 25a30194d27a..b67ea86ff156 100644
@@ -462,6 +462,7 @@ struct dummy_clk {
 };
 static struct dummy_clk dummy_clks[] __initdata = {
 	DUMMY_CLK(NULL, "pxa27x-gpio", "osc_32_768khz"),
+	DUMMY_CLK(NULL, "pxa-rtc", "osc_32_768khz"),
 	DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"),
 	DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"),
 };

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #32 lore raw

PATCH 32/91 bcache: at least try to shrink 1 node in bch_mca_scan()

From: Coly Li <[email protected]>

[ Upstream commit 9fcc34b1a6dd4b8e5337e2b6ef45e428897eca6b ]

In bch_mca_scan(), the number of shrinking btree node is calculated by code like this,

	unsigned long nr = sc->nr_to_scan;

        nr /= c->btree_pages;
        nr = min_t(unsigned long, nr, mca_can_free(c));

variable sc->nr_to_scan is number of objects (here is bcache B+tree nodes' number) to shrink, and pointer variable sc is sent from memory management code as parametr of a callback.

If sc->nr_to_scan is smaller than c->btree_pages, after the above calculation, variable 'nr' will be 0 and nothing will be shrunk. It is frequeently observed that only 1 or 2 is set to sc->nr_to_scan and make nr to be zero. Then bch_mca_scan() will do nothing more then acquiring and releasing mutex c->bucket_lock.

This patch checkes whether nr is 0 after the above calculation, if 0 is the result then set 1 to variable 'n'. Then at least bch_mca_scan() will try to shrink a single B+tree node.

Signed-off-by Coly Li <[email protected]>

Signed-off-by Jens Axboe <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/md/bcache/btree.c | 2 ++
 1 file changed, 2 insertions(+)

drivers/md/bcache/btree.c +2 -0

index 9406326216f1..96a6583e7b52 100644
@@ -685,6 +685,8 @@ static unsigned long bch_mca_scan(struct shrinker *shrink,
 	 * IO can always make forward progress:
 	 */
 	nr /= c->btree_pages;
+	if (nr == 0)
+		nr = 1;
 	nr = min_t(unsigned long, nr, mca_can_free(c));
 
 	i = 0;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #33 lore raw

PATCH 33/91 HID: logitech-hidpp: Silence intermittent get_battery_capacity errors

From: Hans de Goede <[email protected]>

[ Upstream commit 61005d65b6c7dcf61c19516e6ebe5acc02d2cdda ]

My Logitech M185 (PID:4038) 2.4 GHz wireless HID++ mouse is causing intermittent errors like these in the log:

[11091.034857] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[12388.031260] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[16613.718543] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09
[23529.938728] logitech-hidpp-device 0003:046D:4038.0006: hidpp20_batterylevel_get_battery_capacity: received protocol error 0x09

We are already silencing error-code 0x09 (HIDPP_ERROR_RESOURCE_ERROR) errors in other places, lets do the same in hidpp20_batterylevel_get_battery_capacity to remove these harmless, but scary looking errors from the dmesg output.

Signed-off-by Hans de Goede <[email protected]>

Signed-off-by Jiri Kosina <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/hid/hid-logitech-hidpp.c | 3 +++
 1 file changed, 3 insertions(+)

drivers/hid/hid-logitech-hidpp.c +3 -0

index 4706fb852eaf..6ad776b4711b 100644
@@ -978,6 +978,9 @@ static int hidpp20_batterylevel_get_battery_capacity(struct hidpp_device *hidpp,
 	ret = hidpp_send_fap_command_sync(hidpp, feature_index,
 					  CMD_BATTERY_LEVEL_STATUS_GET_BATTERY_LEVEL_STATUS,
 					  NULL, 0, &response);
+	/* Ignore these intermittent errors */
+	if (ret == HIDPP_ERROR_RESOURCE_ERROR)
+		return -EIO;
 	if (ret > 0) {
 		hid_err(hidpp->hid_dev, "%s: received protocol error 0x%02x\n",
 			__func__, ret);

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #34 lore raw

PATCH 34/91 libnvdimm/btt: fix variable rc set but not used

From: Qian Cai <[email protected]>

[ Upstream commit 4e24e37d5313edca8b4ab86f240c046c731e28d6 ]

drivers/nvdimm/btt.c: In function 'btt_read_pg':
drivers/nvdimm/btt.c:1264:8: warning: variable 'rc' set but not used [-Wunused-but-set-variable]

    int rc;
        ^~

Add a ratelimited message in case a storm of errors is encountered.

Fixes d9b83c756953 ("libnvdimm, btt: rework error clearing")

Signed-off-by Qian Cai <[email protected]>

Reviewed-by Vishal Verma <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Dan Williams <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/nvdimm/btt.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

drivers/nvdimm/btt.c +4 -4

index b2feda35966b..471498469d0a 100644
@@ -1259,11 +1259,11 @@ static int btt_read_pg(struct btt *btt, struct bio_integrity_payload *bip,
 
 		ret = btt_data_read(arena, page, off, postmap, cur_len);
 		if (ret) {
-			int rc;
-
 			/* Media error - set the e_flag */
-			rc = btt_map_write(arena, premap, postmap, 0, 1,
-				NVDIMM_IO_ATOMIC);
+			if (btt_map_write(arena, premap, postmap, 0, 1, NVDIMM_IO_ATOMIC))
+				dev_warn_ratelimited(to_dev(arena),
+					"Error persistently tracking bad blocks at %#x\n",
+					premap);
 			goto out_rtt;
 		}

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #35 lore raw

PATCH 35/91 HID: Improve Windows Precision Touchpad detection.

From: Blaž Hrastnik <[email protected]>

[ Upstream commit 2dbc6f113acd74c66b04bf49fb027efd830b1c5a ]

Per Microsoft spec, usage 0xC5 (page 0xFF) returns a blob containing data used to verify the touchpad as a Windows Precision Touchpad.

   0x85, REPORTID_PTPHQA,    //    REPORT_ID (PTPHQA)
    0x09, 0xC5,              //    USAGE (Vendor Usage 0xC5)
    0x15, 0x00,              //    LOGICAL_MINIMUM (0)
    0x26, 0xff, 0x00,        //    LOGICAL_MAXIMUM (0xff)
    0x75, 0x08,              //    REPORT_SIZE (8)
    0x96, 0x00, 0x01,        //    REPORT_COUNT (0x100 (256))
    0xb1, 0x02,              //    FEATURE (Data,Var,Abs)

However, some devices, namely Microsoft's Surface line of products instead implement a "segmented device certification report" (usage 0xC6) which returns the same report, but in smaller chunks.

    0x06, 0x00, 0xff,        //     USAGE_PAGE (Vendor Defined)
    0x85, REPORTID_PTPHQA,   //     REPORT_ID (PTPHQA)
    0x09, 0xC6,              //     USAGE (Vendor usage for segment #)
    0x25, 0x08,              //     LOGICAL_MAXIMUM (8)
    0x75, 0x08,              //     REPORT_SIZE (8)
    0x95, 0x01,              //     REPORT_COUNT (1)
    0xb1, 0x02,              //     FEATURE (Data,Var,Abs)
    0x09, 0xC7,              //     USAGE (Vendor Usage)
    0x26, 0xff, 0x00,        //     LOGICAL_MAXIMUM (0xff)
    0x95, 0x20,              //     REPORT_COUNT (32)
    0xb1, 0x02,              //     FEATURE (Data,Var,Abs)

By expanding Win8 touchpad detection to also look for the segmented report, all Surface touchpads are now properly recognized by hid-multitouch.

Signed-off-by Blaž Hrastnik <[email protected]>

Signed-off-by Benjamin Tissoires <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/hid/hid-core.c | 4 ++++
 1 file changed, 4 insertions(+)

drivers/hid/hid-core.c +4 -0

index 0c547bf841f4..6a04b56d161b 100644
@@ -760,6 +760,10 @@ static void hid_scan_feature_usage(struct hid_parser *parser, u32 usage)
 	if (usage == 0xff0000c5 && parser->global.report_count == 256 &&
 	    parser->global.report_size == 8)
 		parser->scan_flags |= HID_SCAN_FLAG_MT_WIN_8;
+
+	if (usage == 0xff0000c6 && parser->global.report_count == 1 &&
+	    parser->global.report_size == 8)
+		parser->scan_flags |= HID_SCAN_FLAG_MT_WIN_8;
 }
 
 static void hid_scan_collection(struct hid_parser *parser, unsigned type)

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #36 lore raw

PATCH 36/91 scsi: pm80xx: Fix for SATA device discovery

From: peter chang <[email protected]>

[ Upstream commit ce21c63ee995b7a8b7b81245f2cee521f8c3c220 ]

Driver was missing complete() call in mpi_sata_completion which result in SATA abort error handling timing out. That causes the device to be left in the in_recovery state so subsequent commands sent to the device fail and the OS removes access to it.

Link https://lore.kernel.org/r/[email protected] open here

Acked-by Jack Wang <[email protected]>

Signed-off-by peter chang <[email protected]>

Signed-off-by Deepak Ukey <[email protected]>

Signed-off-by Viswas G <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/pm8001/pm80xx_hwi.c | 2 ++
 1 file changed, 2 insertions(+)

drivers/scsi/pm8001/pm80xx_hwi.c +2 -0

index 9edd61c063a1..df5f0bc29587 100644
@@ -2368,6 +2368,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
 			pm8001_printk("task 0x%p done with io_status 0x%x"
 			" resp 0x%x stat 0x%x but aborted by upper layer!\n",
 			t, status, ts->resp, ts->stat));
+		if (t->slow_task)
+			complete(&t->slow_task->completion);
 		pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
 	} else {
 		spin_unlock_irqrestore(&t->task_state_lock, flags);

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:51 UTC #37 lore raw

PATCH 37/91 scsi: ufs: Fix error handing during hibern8 enter

From: Subhash Jadavani <[email protected]>

[ Upstream commit 6d303e4b19d694cdbebf76bcdb51ada664ee953d ]

During clock gating (ufshcd_gate_work()), we first put the link hibern8 by calling ufshcd_uic_hibern8_enter() and if ufshcd_uic_hibern8_enter() returns success (0) then we gate all the clocks. Now let’s zoom in to what ufshcd_uic_hibern8_enter() does internally: It calls __ufshcd_uic_hibern8_enter() and if failure is encountered, link recovery shall put the link back to the highest HS gear and returns success (0) to ufshcd_uic_hibern8_enter() which is the issue as link is still in active state due to recovery! Now ufshcd_uic_hibern8_enter() returns success to ufshcd_gate_work() and hence it goes ahead with gating the UFS clock while link is still in active state hence I believe controller would raise UIC error interrupts. But when we service the interrupt, clocks might have already been disabled!

This change fixes for this by returning failure from __ufshcd_uic_hibern8_enter() if recovery succeeds as link is still not in hibern8, upon receiving the error ufshcd_hibern8_enter() would initiate retry to put the link state back into hibern8.

Link https://lore.kernel.org/r/[email protected] open here

Reviewed-by Avri Altman <[email protected]>

Reviewed-by Bean Huo <[email protected]>

Signed-off-by Subhash Jadavani <[email protected]>

Signed-off-by Can Guo <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/ufs/ufshcd.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

drivers/scsi/ufs/ufshcd.c +14 -5

index 9feae23bfd09..d25082e573e0 100644
@@ -3684,15 +3684,24 @@ static int __ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
 			     ktime_to_us(ktime_sub(ktime_get(), start)), ret);
 
 	if (ret) {
+		int err;
+
 		dev_err(hba->dev, "%s: hibern8 enter failed. ret = %d\n",
 			__func__, ret);
 
 		/*
-		 * If link recovery fails then return error so that caller
-		 * don't retry the hibern8 enter again.
+		 * If link recovery fails then return error code returned from
+		 * ufshcd_link_recovery().
+		 * If link recovery succeeds then return -EAGAIN to attempt
+		 * hibern8 enter retry again.
 		 */
-		if (ufshcd_link_recovery(hba))
-			ret = -ENOLINK;
+		err = ufshcd_link_recovery(hba);
+		if (err) {
+			dev_err(hba->dev, "%s: link recovery failed", __func__);
+			ret = err;
+		} else {
+			ret = -EAGAIN;
+		}
 	} else
 		ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_ENTER,
 								POST_CHANGE);

@@ -3706,7 +3715,7 @@ static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba)
 
 	for (retries = UIC_HIBERN8_ENTER_RETRIES; retries > 0; retries--) {
 		ret = __ufshcd_uic_hibern8_enter(hba);
-		if (!ret || ret == -ENOLINK)
+		if (!ret)
 			goto out;
 	}
 out:

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #38 lore raw

PATCH 38/91 scsi: scsi_debug: num_tgts must be >= 0

From: Maurizio Lombardi <[email protected]>

[ Upstream commit aa5334c4f3014940f11bf876e919c956abef4089 ]

Passing the parameter "num_tgts=-1" will start an infinite loop that exhausts the system memory

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Maurizio Lombardi <[email protected]>

Acked-by Douglas Gilbert <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/scsi_debug.c | 5 +++++
 1 file changed, 5 insertions(+)

drivers/scsi/scsi_debug.c +5 -0

index 92bc5b2d24ae..ac936b5ca74e 100644
@@ -4960,6 +4960,11 @@ static int __init scsi_debug_init(void)
 		return -EINVAL;
 	}
 
+	if (sdebug_num_tgts < 0) {
+		pr_err("num_tgts must be >= 0\n");
+		return -EINVAL;
+	}
+
 	if (sdebug_guard > 1) {
 		pr_err("guard must be 0 or 1\n");
 		return -EINVAL;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #39 lore raw

PATCH 39/91 scsi: NCR5380: Add disconnect_mask module parameter

Link https://lore.kernel.org/r/993b17545990f31f9fa5a98202b51102a68e7594.1573875417.git.fthain@telegraphics.com.au open here

From: Finn Thain <[email protected]>

[ Upstream commit 0b7a223552d455bcfba6fb9cfc5eef2b5fce1491 ]

Add a module parameter to inhibit disconnect/reselect for individual targets. This gains compatibility with Aztec PowerMonster SCSI/SATA adapters with buggy firmware. (No fix is available from the vendor.)

Apparently these adapters pass-through the product/vendor of the attached SATA device. Since they can't be identified from the response to an INQUIRY command, a device blacklist flag won't work.

Cc Michael Schmitz <[email protected]>

Reviewed-and-tested-by Michael Schmitz <[email protected]>

Signed-off-by Finn Thain <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/NCR5380.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

drivers/scsi/NCR5380.c +5 -1

index 21377ac71168..79b0b4eece19 100644
@@ -129,6 +129,9 @@
 #define NCR5380_release_dma_irq(x)
 #endif
 
+static unsigned int disconnect_mask = ~0;
+module_param(disconnect_mask, int, 0444);
+
 static int do_abort(struct Scsi_Host *);
 static void do_reset(struct Scsi_Host *);
 static void bus_reset_cleanup(struct Scsi_Host *);

@@ -946,7 +949,8 @@ static bool NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
 	int err;
 	bool ret = true;
 	bool can_disconnect = instance->irq != NO_IRQ &&
-			      cmd->cmnd[0] != REQUEST_SENSE;
+			      cmd->cmnd[0] != REQUEST_SENSE &&
+			      (disconnect_mask & BIT(scmd_id(cmd)));
 
 	NCR5380_dprint(NDEBUG_ARBITRATION, instance);
 	dsprintk(NDEBUG_ARBITRATION, instance, "starting arbitration, id = %d\n",

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:51 UTC #40 lore raw

PATCH 40/91 scsi: iscsi: Dont send data to unbound connection

From: Anatol Pomazau <[email protected]>

[ Upstream commit 238191d65d7217982d69e21c1d623616da34b281 ]

If a faulty initiator fails to bind the socket to the iSCSI connection before emitting a command, for instance, a subsequent send_pdu, it will crash the kernel due to a null pointer dereference in sock_sendmsg(), as shown in the log below. This patch makes sure the bind succeeded before trying to use the socket.

BUG: kernel NULL pointer dereference, address: 0000000000000018
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.4.0-rc2.iscsi+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[   24.158246] Workqueue: iscsi_q_0 iscsi_xmitworker
[   24.158883] RIP: 0010:apparmor_socket_sendmsg+0x5/0x20
[...]
[   24.161739] RSP: 0018:ffffab6440043ca0 EFLAGS: 00010282
[   24.162400] RAX: ffffffff891c1c00 RBX: ffffffff89d53968 RCX: 0000000000000001
[   24.163253] RDX: 0000000000000030 RSI: ffffab6440043d00 RDI: 0000000000000000
[   24.164104] RBP: 0000000000000030 R08: 0000000000000030 R09: 0000000000000030
[   24.165166] R10: ffffffff893e66a0 R11: 0000000000000018 R12: ffffab6440043d00
[   24.166038] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d5575a62e90
[   24.166919] FS:  0000000000000000(0000) GS:ffff9d557db80000(0000) knlGS:0000000000000000
[   24.167890] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   24.168587] CR2: 0000000000000018 CR3: 000000007a838000 CR4: 00000000000006e0
[   24.169451] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   24.170320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   24.171214] Call Trace:
[   24.171537]  security_socket_sendmsg+0x3a/0x50
[   24.172079]  sock_sendmsg+0x16/0x60
[   24.172506]  iscsi_sw_tcp_xmit_segment+0x77/0x120
[   24.173076]  iscsi_sw_tcp_pdu_xmit+0x58/0x170
[   24.173604]  ? iscsi_dbg_trace+0x63/0x80
[   24.174087]  iscsi_tcp_task_xmit+0x101/0x280
[   24.174666]  iscsi_xmit_task+0x83/0x110
[   24.175206]  iscsi_xmitworker+0x57/0x380
[   24.175757]  ? __schedule+0x2a2/0x700
[   24.176273]  process_one_work+0x1b5/0x360
[   24.176837]  worker_thread+0x50/0x3c0
[   24.177353]  kthread+0xf9/0x130
[   24.177799]  ? process_one_work+0x360/0x360
[   24.178401]  ? kthread_park+0x90/0x90
[   24.178915]  ret_from_fork+0x35/0x40
[   24.179421] Modules linked in:
[   24.179856] CR2: 0000000000000018
[   24.180327] ---[ end trace b4b7674b6df5f480 ]---

Signed-off-by Anatol Pomazau <[email protected]>

Co-developed-by Frank Mayhar <[email protected]>

Signed-off-by Frank Mayhar <[email protected]>

Co-developed-by Bharath Ravi <[email protected]>

Signed-off-by Bharath Ravi <[email protected]>

Co-developed-by Khazhimsel Kumykov <[email protected]>

Signed-off-by Khazhimsel Kumykov <[email protected]>

Co-developed-by Gabriel Krisman Bertazi <[email protected]>

Signed-off-by Gabriel Krisman Bertazi <[email protected]>

Reviewed-by Lee Duncan <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/scsi/iscsi_tcp.c | 8 ++++++++
 1 file changed, 8 insertions(+)

drivers/scsi/iscsi_tcp.c +8 -0

index 045207b5560e..7e3a77d3c6f0 100644
@@ -372,8 +372,16 @@ static int iscsi_sw_tcp_pdu_xmit(struct iscsi_task *task)
 {
 	struct iscsi_conn *conn = task->conn;
 	unsigned int noreclaim_flag;
+	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
+	struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data;
 	int rc = 0;
 
+	if (!tcp_sw_conn->sock) {
+		iscsi_conn_printk(KERN_ERR, conn,
+				  "Transport not bound to socket!\n");
+		return -EINVAL;
+	}
+
 	noreclaim_flag = memalloc_noreclaim_save();
 
 	while (iscsi_sw_tcp_xmit_qlen(conn)) {

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #41 lore raw

PATCH 41/91 scsi: target: iscsi: Wait for all commands to finish before freeing a session

From: Bart Van Assche <[email protected]>

[ Upstream commit e9d3009cb936bd0faf0719f68d98ad8afb1e613b ]

The iSCSI target driver is the only target driver that does not wait for ongoing commands to finish before freeing a session. Make the iSCSI target driver wait for ongoing commands to finish before freeing a session. This patch fixes the following KASAN complaint:

BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710
Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247

CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: target_completion target_complete_ok_work [target_core_mod]
Call Trace:
 dump_stack+0x8a/0xd6
 print_address_description.constprop.0+0x40/0x60
 __kasan_report.cold+0x1b/0x33
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 __lock_acquire+0xb1a/0x2710
 lock_acquire+0xd3/0x200
 _raw_spin_lock_irqsave+0x43/0x60
 target_release_cmd_kref+0x162/0x7f0 [target_core_mod]
 target_put_sess_cmd+0x2e/0x40 [target_core_mod]
 lio_check_stop_free+0x12/0x20 [iscsi_target_mod]
 transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod]
 target_complete_ok_work+0x1b0/0x790 [target_core_mod]
 process_one_work+0x549/0xa40
 worker_thread+0x7a/0x5d0
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

Allocated by task 889:
 save_stack+0x23/0x90
 __kasan_kmalloc.constprop.0+0xcf/0xe0
 kasan_slab_alloc+0x12/0x20
 kmem_cache_alloc+0xf6/0x360
 transport_alloc_session+0x29/0x80 [target_core_mod]
 iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod]
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

Freed by task 1025:
 save_stack+0x23/0x90
 __kasan_slab_free+0x13a/0x190
 kasan_slab_free+0x12/0x20
 kmem_cache_free+0x146/0x400
 transport_free_session+0x179/0x2f0 [target_core_mod]
 transport_deregister_session+0x130/0x180 [target_core_mod]
 iscsit_close_session+0x12c/0x350 [iscsi_target_mod]
 iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod]
 iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod]
 iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod]
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

The buggy address belongs to the object at ffff8881154ec9c0
 which belongs to the cache se_sess_cache of size 352
The buggy address is located 176 bytes inside of
 352-byte region [ffff8881154ec9c0, ffff8881154ecb20)
The buggy address belongs to the page:
page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0
flags: 0x2fff000000010200(slab|head)
raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400
raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                             ^
 ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc

Cc Mike Christie <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Reviewed-by Roman Bolshakov <[email protected]>

Signed-off-by Bart Van Assche <[email protected]>

Signed-off-by Martin K. Petersen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/target/iscsi/iscsi_target.c | 10 ++++++++--
 include/scsi/iscsi_proto.h          |  1 +
 2 files changed, 9 insertions(+), 2 deletions(-)

drivers/target/iscsi/iscsi_target.c +8 -2

index fb7bd422e2e1..21ce92ee1652 100644
@@ -1158,7 +1158,9 @@ int iscsit_setup_scsi_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 		hdr->cmdsn, be32_to_cpu(hdr->data_length), payload_length,
 		conn->cid);
 
-	target_get_sess_cmd(&cmd->se_cmd, true);
+	if (target_get_sess_cmd(&cmd->se_cmd, true) < 0)
+		return iscsit_add_reject_cmd(cmd,
+				ISCSI_REASON_WAITING_FOR_LOGOUT, buf);
 
 	cmd->sense_reason = transport_lookup_cmd_lun(&cmd->se_cmd,
 						     scsilun_to_int(&hdr->lun));

@@ -2004,7 +2006,9 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 			      conn->sess->se_sess, 0, DMA_NONE,
 			      TCM_SIMPLE_TAG, cmd->sense_buffer + 2);
 
-	target_get_sess_cmd(&cmd->se_cmd, true);
+	if (target_get_sess_cmd(&cmd->se_cmd, true) < 0)
+		return iscsit_add_reject_cmd(cmd,
+				ISCSI_REASON_WAITING_FOR_LOGOUT, buf);
 
 	/*
 	 * TASK_REASSIGN for ERL=2 / connection stays inside of

@@ -4236,6 +4240,8 @@ int iscsit_close_connection(
 	 * must wait until they have completed.
 	 */
 	iscsit_check_conn_usage_count(conn);
+	target_sess_cmd_list_set_waiting(sess->se_sess);
+	target_wait_for_sess_cmds(sess->se_sess);
 
 	ahash_request_free(conn->conn_tx_hash);
 	if (conn->conn_rx_hash) {

include/scsi/iscsi_proto.h +1 -0

index df156f1d50b2..f0a01a54bd15 100644
@@ -638,6 +638,7 @@ struct iscsi_reject {
 #define ISCSI_REASON_BOOKMARK_INVALID	9
 #define ISCSI_REASON_BOOKMARK_NO_RESOURCES	10
 #define ISCSI_REASON_NEGOTIATION_RESET	11
+#define ISCSI_REASON_WAITING_FOR_LOGOUT	12
 
 /* Max. number of Key=Value pairs in a text message */
 #define MAX_KEY_VALUE_PAIRS	8192

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #42 lore raw

PATCH 42/91 gpio: mpc8xxx: Dont overwrite default irq_set_type callback

From: Vladimir Oltean <[email protected]>

[ Upstream commit 4e50573f39229d5e9c985fa3b4923a8b29619ade ]

The per-SoC devtype structures can contain their own callbacks that overwrite mpc8xxx_gpio_devtype_default.

The clear intention is that mpc8xxx_irq_set_type is used in case the SoC does not specify a more specific callback. But what happens is that if the SoC doesn't specify one, its .irq_set_type is de-facto NULL, and this overwrites mpc8xxx_irq_set_type to a no-op. This means that the following SoCs are affected:

- fsl,mpc8572-gpio
- fsl,ls1028a-gpio
- fsl,ls1088a-gpio

On these boards, the irq_set_type does exactly nothing, and the GPIO controller keeps its GPICR register in the hardware-default state. On the LS1028A, that is ACTIVE_BOTH, which means 2 interrupts are raised even if the IRQ client requests LEVEL_HIGH. Another implication is that the IRQs are not checked (e.g. level-triggered interrupts are not rejected, although they are not supported).

Fixes 82e39b0d8566 ("gpio: mpc8xxx: handle differences between incarnations at a single place")

Signed-off-by Vladimir Oltean <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Tested-by Michael Walle <[email protected]>

Signed-off-by Linus Walleij <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/gpio/gpio-mpc8xxx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/gpio/gpio-mpc8xxx.c +2 -1

index 8c93dec498fa..e7783b852d69 100644
@@ -337,7 +337,8 @@ static int mpc8xxx_probe(struct platform_device *pdev)
 	 * It's assumed that only a single type of gpio controller is available
 	 * on the current machine, so overwriting global data is fine.
 	 */
-	mpc8xxx_irq_chip.irq_set_type = devtype->irq_set_type;
+	if (devtype->irq_set_type)
+		mpc8xxx_irq_chip.irq_set_type = devtype->irq_set_type;
 
 	if (devtype->gpio_dir_out)
 		gc->direction_output = devtype->gpio_dir_out;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:24 UTC #43 lore raw

PATCH 43/91 apparmor: fix unsigned len comparison with less than zero

From: Colin Ian King <[email protected]>

[ Upstream commit 00e0590dbaec6f1bcaa36a85467d7e3497ced522 ]

The sanity check in macro update_for_len checks to see if len is less than zero, however, len is a size_t so it can never be less than zero, so this sanity check is a no-op. Fix this by making len a ssize_t so the comparison will work and add ulen that is a size_t copy of len so that the min() macro won't throw warnings about comparing different types.

Addresses-Coverity: ("Macro compares unsigned to 0")

Fixes f1bd904175e8 ("apparmor: add the base fns() for domain labels")

Signed-off-by Colin Ian King <[email protected]>

Signed-off-by John Johansen <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 security/apparmor/label.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

security/apparmor/label.c +7 -5

index c5b99b954580..ea63710442ae 100644
@@ -1463,11 +1463,13 @@ static inline bool use_label_hname(struct aa_ns *ns, struct aa_label *label,
 /* helper macro for snprint routines */
 #define update_for_len(total, len, size, str)	\
 do {					\
+	size_t ulen = len;		\
+					\
 	AA_BUG(len < 0);		\
-	total += len;			\
-	len = min(len, size);		\
-	size -= len;			\
-	str += len;			\
+	total += ulen;			\
+	ulen = min(ulen, size);		\
+	size -= ulen;			\
+	str += ulen;			\
 } while (0)
 
 /**

@@ -1602,7 +1604,7 @@ int aa_label_snxprint(char *str, size_t size, struct aa_ns *ns,
 	struct aa_ns *prev_ns = NULL;
 	struct label_it i;
 	int count = 0, total = 0;
-	size_t len;
+	ssize_t len;
 
 	AA_BUG(!str && size != 0);
 	AA_BUG(!label);

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #44 lore raw

PATCH 44/91 scripts/kallsyms: fix definitely-lost memory leak

From: Masahiro Yamada <[email protected]>

[ Upstream commit 21915eca088dc271c970e8351290e83d938114ac ]

build_initial_tok_table() overwrites unused sym_entry to shrink the table size. Before the entry is overwritten, table[i].sym must be freed since it is malloc'ed data.

This fixes the 'definitely lost' report from valgrind. I ran valgrind against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary:

[Before the fix]

LEAK SUMMARY:

     definitely lost: 53,184 bytes in 2,874 blocks

[After the fix]

LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks

Signed-off-by Masahiro Yamada <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 scripts/kallsyms.c | 2 ++
 1 file changed, 2 insertions(+)

scripts/kallsyms.c +2 -0

index b471022c8162..b43531899648 100644
@@ -510,6 +510,8 @@ static void build_initial_tok_table(void)
 				table[pos] = table[i];
 			learn_symbol(table[pos].sym, table[pos].len);
 			pos++;
+		} else {
+			free(table[i].sym);
 		}
 	}
 	table_cnt = pos;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #45 lore raw

PATCH 45/91 f2fs: choose hardlimit when softlimit is larger than hardlimit in f2fs_statfs_project()

From: Chengguang Xu <[email protected]>

[ Upstream commit 909110c060f22e65756659ec6fa957ae75777e00 ]

Setting softlimit larger than hardlimit seems meaningless for disk quota but currently it is allowed. In this case, there may be a bit of comfusion for users when they run df comamnd to directory which has project quota.

For example, we set 20M softlimit and 10M hardlimit of block usage limit for project quota of test_dir(project id 123).

[root@hades f2fs]# repquota -P -a
*** Report for project quotas on device /dev/nvme0n1p8 Block grace time: 7days; Inode grace time: 7days Block limits File limits
Project used soft hard grace used soft hard grace
----------------------------------------------------------------------
0 -- 4 0 0 1 0 0
123 +- 10248 20480 10240 2 0 0

The result of df command as below:

[root@hades f2fs]# df -h /mnt/f2fs/test
Filesystem Size Used Avail Use% Mounted on
/dev/nvme0n1p8 20M 11M 10M 51% /mnt/f2fs

Even though it looks like there is another 10M free space to use, if we write new data to diretory test(inherit project id), the write will fail with errno(-EDQUOT).

After this patch, the df result looks like below.

[root@hades f2fs]# df -h /mnt/f2fs/test
Filesystem Size Used Avail Use% Mounted on
/dev/nvme0n1p8 10M 10M 0 100% /mnt/f2fs

Signed-off-by Chengguang Xu <[email protected]>

Reviewed-by Chao Yu <[email protected]>

Signed-off-by Jaegeuk Kim <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/f2fs/super.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

fs/f2fs/super.c +14 -6

index e4aabfc21bd4..8635df6cba55 100644
@@ -912,9 +912,13 @@ static int f2fs_statfs_project(struct super_block *sb,
 		return PTR_ERR(dquot);
 	spin_lock(&dq_data_lock);
 
-	limit = (dquot->dq_dqb.dqb_bsoftlimit ?
-		 dquot->dq_dqb.dqb_bsoftlimit :
-		 dquot->dq_dqb.dqb_bhardlimit) >> sb->s_blocksize_bits;
+	limit = 0;
+	if (dquot->dq_dqb.dqb_bsoftlimit)
+		limit = dquot->dq_dqb.dqb_bsoftlimit;
+	if (dquot->dq_dqb.dqb_bhardlimit &&
+			(!limit || dquot->dq_dqb.dqb_bhardlimit < limit))
+		limit = dquot->dq_dqb.dqb_bhardlimit;
+
 	if (limit && buf->f_blocks > limit) {
 		curblock = dquot->dq_dqb.dqb_curspace >> sb->s_blocksize_bits;
 		buf->f_blocks = limit;

@@ -923,9 +927,13 @@ static int f2fs_statfs_project(struct super_block *sb,
 			 (buf->f_blocks - curblock) : 0;
 	}
 
-	limit = dquot->dq_dqb.dqb_isoftlimit ?
-		dquot->dq_dqb.dqb_isoftlimit :
-		dquot->dq_dqb.dqb_ihardlimit;
+	limit = 0;
+	if (dquot->dq_dqb.dqb_isoftlimit)
+		limit = dquot->dq_dqb.dqb_isoftlimit;
+	if (dquot->dq_dqb.dqb_ihardlimit &&
+			(!limit || dquot->dq_dqb.dqb_ihardlimit < limit))
+		limit = dquot->dq_dqb.dqb_ihardlimit;
+
 	if (limit && buf->f_files > limit) {
 		buf->f_files = limit;
 		buf->f_ffree =

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #46 lore raw

PATCH 46/91 cdrom: respect device capabilities during opening action

From: Diego Elio Pettenò <[email protected]>

[ Upstream commit 366ba7c71ef77c08d06b18ad61b26e2df7352338 ]

Reading the TOC only works if the device can play audio, otherwise these commands fail (and possibly bring the device to an unhealthy state.)

Similarly, cdrom_mmc3_profile() should only be called if the device supports generic packet commands.

To: Jens Axboe <[email protected]>

Cc [email protected]

Signed-off-by Diego Elio Pettenò <[email protected]>

Signed-off-by Jens Axboe <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/cdrom/cdrom.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

drivers/cdrom/cdrom.c +11 -1

index 90dd8e7291da..1c90da4af94f 100644
@@ -995,6 +995,12 @@ static void cdrom_count_tracks(struct cdrom_device_info *cdi, tracktype *tracks)
 	tracks->xa = 0;
 	tracks->error = 0;
 	cd_dbg(CD_COUNT_TRACKS, "entering cdrom_count_tracks\n");
+
+	if (!CDROM_CAN(CDC_PLAY_AUDIO)) {
+		tracks->error = CDS_NO_INFO;
+		return;
+	}
+
 	/* Grab the TOC header so we can see how many tracks there are */
 	ret = cdi->ops->audio_ioctl(cdi, CDROMREADTOCHDR, &header);
 	if (ret) {

@@ -1161,7 +1167,8 @@ int cdrom_open(struct cdrom_device_info *cdi, struct block_device *bdev,
 		ret = open_for_data(cdi);
 		if (ret)
 			goto err;
-		cdrom_mmc3_profile(cdi);
+		if (CDROM_CAN(CDC_GENERIC_PACKET))
+			cdrom_mmc3_profile(cdi);
 		if (mode & FMODE_WRITE) {
 			ret = -EROFS;
 			if (cdrom_open_write(cdi))

@@ -2878,6 +2885,9 @@ int cdrom_get_last_written(struct cdrom_device_info *cdi, long *last_written)
 	   it doesn't give enough information or fails. then we return
 	   the toc contents. */
 use_toc:
+	if (!CDROM_CAN(CDC_PLAY_AUDIO))
+		return -ENOSYS;
+
 	toc.cdte_format = CDROM_MSF;
 	toc.cdte_track = CDROM_LEADOUT;
 	if ((ret = cdi->ops->audio_ioctl(cdi, CDROMREADTOCENTRY, &toc)))

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #47 lore raw

PATCH 47/91 perf script: Fix brstackinsn for AUXTRACE

Link http://lore.kernel.org/lkml/[email protected] open here

From: Adrian Hunter <[email protected]>

[ Upstream commit 0cd032d3b5fcebf5454315400ab310746a81ca53 ]

brstackinsn must be allowed to be set by the user when AUX area data has been captured because, in that case, the branch stack might be synthesized on the fly. This fixes the following error:

Before:

  $ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
  [ perf record: Woken up 19 times to write data ]
  [ perf record: Captured and wrote 2.274 MB perf.data ]
  $ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
  Display of branch stack assembler requested, but non all-branch filter set
  Hint: run 'perf record -b ...'

After:

  $ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
  [ perf record: Woken up 19 times to write data ]
  [ perf record: Captured and wrote 2.274 MB perf.data ]
  $ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
            grep 13759 [002]  8091.310257:       1862                                        instructions:uH:      5641d58069eb bmexec+0x86b (/bin/grep)
        bmexec+2485:
        00005641d5806b35                        jnz 0x5641d5806bd0              # MISPRED
        00005641d5806bd0                        movzxb  (%r13,%rdx,1), %eax
        00005641d5806bd6                        add %rdi, %rax
        00005641d5806bd9                        movzxb  -0x1(%rax), %edx
        00005641d5806bdd                        cmp %rax, %r14
        00005641d5806be0                        jnb 0x5641d58069c0              # MISPRED
        mismatch of LBR data and executable
        00005641d58069c0                        movzxb  (%r13,%rdx,1), %edi

Fixes 48d02a1d5c13 ("perf script: Add 'brstackinsn' for branch stacks")

Reported-by Andi Kleen <[email protected]>

Signed-off-by Adrian Hunter <[email protected]>

Cc Jiri Olsa <[email protected]>

Signed-off-by Arnaldo Carvalho de Melo <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 tools/perf/builtin-script.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

tools/perf/builtin-script.c +1 -1

index 76789523429a..09c4380bc225 100644
@@ -355,7 +355,7 @@ static int perf_evsel__check_attr(struct perf_evsel *evsel,
 		       "selected. Hence, no address to lookup the source line number.\n");
 		return -EINVAL;
 	}
-	if (PRINT_FIELD(BRSTACKINSN) &&
+	if (PRINT_FIELD(BRSTACKINSN) && !allow_user_set &&
 	    !(perf_evlist__combined_branch_type(session->evlist) &
 	      PERF_SAMPLE_BRANCH_ANY)) {
 		pr_err("Display of branch stack assembler requested, but non all-branch filter set\n"

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:50 UTC #48 lore raw

PATCH 48/91 perf regs: Make perf_reg_name() return "unknown" instead of NULL

From: Arnaldo Carvalho de Melo <[email protected]>

[ Upstream commit 5b596e0ff0e1852197d4c82d3314db5e43126bf7 ]

To avoid breaking the build on arches where this is not wired up, at least all the other features should be made available and when using this specific routine, the "unknown" should point the user/developer to the need to wire this up on this particular hardware architecture.

Detected in a container mipsel debian cross build environment, where it shows up as:

In file included from /usr/mipsel-linux-gnu/include/stdio.h:867,

                   from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
                   from util/session.c:13:
  In function 'printf',
      inlined from 'regs_dump__printf' at util/session.c:1103:3,
      inlined from 'regs__printf' at util/session.c:1131:2:
  /usr/mipsel-linux-gnu/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
    107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cross compiler details:

mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909

Also on mips64:

In file included from /usr/mips64-linux-gnuabi64/include/stdio.h:867,

                   from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
                   from util/session.c:13:
  In function 'printf',
      inlined from 'regs_dump__printf' at util/session.c:1103:3,
      inlined from 'regs__printf' at util/session.c:1131:2,
      inlined from 'regs_user__printf' at util/session.c:1139:3,
      inlined from 'dump_sample' at util/session.c:1246:3,
      inlined from 'machines__deliver_event' at util/session.c:1421:3:
  /usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
    107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  In function 'printf',
      inlined from 'regs_dump__printf' at util/session.c:1103:3,
      inlined from 'regs__printf' at util/session.c:1131:2,
      inlined from 'regs_intr__printf' at util/session.c:1147:3,
      inlined from 'dump_sample' at util/session.c:1249:3,
      inlined from 'machines__deliver_event' at util/session.c:1421:3:
  /usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
    107 |   return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cross compiler details:

mips64-linux-gnuabi64-gcc (Debian 9.2.1-8) 9.2.1 20190909

Fixes 2bcd355b71da ("perf tools: Add interface to arch registers sets")

Cc Adrian Hunter <[email protected]>

Cc Jiri Olsa <[email protected]>

Cc Namhyung Kim <[email protected]>

Link https://lkml.kernel.org/n/[email protected] open here

Signed-off-by Arnaldo Carvalho de Melo <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 tools/perf/util/perf_regs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

tools/perf/util/perf_regs.h +1 -1

index c9319f8d17a6..f732e3af2bd4 100644
@@ -34,7 +34,7 @@ int perf_reg_value(u64 *valp, struct regs_dump *regs, int id);
 
 static inline const char *perf_reg_name(int id __maybe_unused)
 {
-	return NULL;
+	return "unknown";
 }
 
 static inline int perf_reg_value(u64 *valp __maybe_unused,

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:50 UTC #49 lore raw

PATCH 49/91 s390/zcrypt: handle new reply code FILTERED_BY_HYPERVISOR

From: Harald Freudenberger <[email protected]>

[ Upstream commit 6733775a92eacd612ac88afa0fd922e4ffeb2bc7 ]

This patch introduces support for a new architectured reply code 0x8B indicating that a hypervisor layer (if any) has rejected an ap message.

Linux may run as a guest on top of a hypervisor like zVM or KVM. So the crypto hardware seen by the ap bus may be restricted by the hypervisor for example only a subset like only clear key crypto requests may be supported. Other requests will be filtered out - rejected by the hypervisor. The new reply code 0x8B will appear in such cases and needs to get recognized by the ap bus and zcrypt device driver zoo.

Signed-off-by Harald Freudenberger <[email protected]>

Signed-off-by Vasily Gorbik <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/s390/crypto/zcrypt_error.h | 2 ++
 1 file changed, 2 insertions(+)

drivers/s390/crypto/zcrypt_error.h +2 -0

index 9499cd3a05f8..02a936db0092 100644
@@ -75,6 +75,7 @@ struct error_hdr {
 #define REP82_ERROR_EVEN_MOD_IN_OPND	    0x85
 #define REP82_ERROR_RESERVED_FIELD	    0x88
 #define REP82_ERROR_INVALID_DOMAIN_PENDING  0x8A
+#define REP82_ERROR_FILTERED_BY_HYPERVISOR  0x8B
 #define REP82_ERROR_TRANSPORT_FAIL	    0x90
 #define REP82_ERROR_PACKET_TRUNCATED	    0xA0
 #define REP82_ERROR_ZERO_BUFFER_LEN	    0xB0

@@ -105,6 +106,7 @@ static inline int convert_error(struct zcrypt_queue *zq,
 	case REP82_ERROR_INVALID_DOMAIN_PRECHECK:
 	case REP82_ERROR_INVALID_DOMAIN_PENDING:
 	case REP82_ERROR_INVALID_SPECIAL_CMD:
+	case REP82_ERROR_FILTERED_BY_HYPERVISOR:
 	//   REP88_ERROR_INVALID_KEY		// '82' CEX2A
 	//   REP88_ERROR_OPERAND		// '84' CEX2A
 	//   REP88_ERROR_OPERAND_EVEN_MOD	// '85' CEX2A

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #50 lore raw

PATCH 50/91 libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h

From: Masahiro Yamada <[email protected]>

[ Upstream commit a8de1304b7df30e3a14f2a8b9709bb4ff31a0385 ]

The DTC v1.5.1 added references to (U)INT32_MAX.

This is no problem for user-space programs since <stdint.h> defines (U)INT32_MAX along with (u)int32_t.

For the kernel space, libfdt_env.h needs to be adjusted before we pull in the changes.

In the kernel, we usually use s/u32 instead of (u)int32_t for the fixed-width types.

Accordingly, we already have S/U32_MAX for their max values. So, we should not add (U)INT32_MAX to <linux/limits.h> any more.

Instead, add them to the in-kernel libfdt_env.h to compile the latest libfdt.

Signed-off-by Masahiro Yamada <[email protected]>

Signed-off-by Rob Herring <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/arm/boot/compressed/libfdt_env.h | 4 +++-
 arch/powerpc/boot/libfdt_env.h        | 2 ++
 include/linux/libfdt_env.h            | 3 +++
 3 files changed, 8 insertions(+), 1 deletion(-)

arch/arm/boot/compressed/libfdt_env.h +3 -1

index b36c0289a308..6a0f1f524466 100644
@@ -2,11 +2,13 @@
 #ifndef _ARM_LIBFDT_ENV_H
 #define _ARM_LIBFDT_ENV_H
 
+#include <linux/limits.h>
 #include <linux/types.h>
 #include <linux/string.h>
 #include <asm/byteorder.h>
 
-#define INT_MAX			((int)(~0U>>1))
+#define INT32_MAX	S32_MAX
+#define UINT32_MAX	U32_MAX
 
 typedef __be16 fdt16_t;
 typedef __be32 fdt32_t;

arch/powerpc/boot/libfdt_env.h +2 -0

index 39155d3b2cef..ac5d3c947e04 100644
@@ -6,6 +6,8 @@
 #include <string.h>
 
 #define INT_MAX			((int)(~0U>>1))
+#define UINT32_MAX		((u32)~0U)
+#define INT32_MAX		((s32)(UINT32_MAX >> 1))
 
 #include "of.h"

include/linux/libfdt_env.h +3 -0

index 1aa707ab19bb..8b54c591678e 100644
@@ -7,6 +7,9 @@
 
 #include <asm/byteorder.h>
 
+#define INT32_MAX	S32_MAX
+#define UINT32_MAX	U32_MAX
+
 typedef __be16 fdt16_t;
 typedef __be32 fdt32_t;
 typedef __be64 fdt64_t;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #51 lore raw

PATCH 51/91 s390/cpum_sf: Check for SDBT and SDB consistency

From: Thomas Richter <[email protected]>

[ Upstream commit 247f265fa502e7b17a0cb0cc330e055a36aafce4 ]

Each SBDT is located at a 4KB page and contains 512 entries. Each entry of a SDBT points to a SDB, a 4KB page containing sampled data. The last entry is a link to another SDBT page.

When an event is created the function sequence executed is:

__hw_perf_event_init()

  +--> allocate_buffers()
       +--> realloc_sampling_buffers()
	    +---> alloc_sample_data_block()

Both functions realloc_sampling_buffers() and alloc_sample_data_block() allocate pages and the allocation can fail. This is handled correctly and all allocated pages are freed and error -ENOMEM is returned to the top calling function. Finally the event is not created.

Once the event has been created, the amount of initially allocated SDBT and SDB can be too low. This is detected during measurement interrupt handling, where the amount of lost samples is calculated. If the number of lost samples is too high considering sampling frequency and already allocated SBDs, the number of SDBs is enlarged during the next execution of cpumsf_pmu_enable().

If more SBDs need to be allocated, functions

       realloc_sampling_buffers()
       +---> alloc-sample_data_block()

are called to allocate more pages. Page allocation may fail and the returned error is ignored. A SDBT and SDB setup already exists.

However the modified SDBTs and SDBs might end up in a situation where the first entry of an SDBT does not point to an SDB, but another SDBT, basicly an SBDT without payload. This can not be handled by the interrupt handler, where an SDBT must have at least one entry pointing to an SBD.

Add a check to avoid SDBTs with out payload (SDBs) when enlarging the buffer setup.

Signed-off-by Thomas Richter <[email protected]>

Signed-off-by Vasily Gorbik <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 arch/s390/kernel/perf_cpum_sf.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

arch/s390/kernel/perf_cpum_sf.c +15 -2

index 2e2fd9535f86..45304085b6ee 100644
@@ -185,7 +185,7 @@ static int realloc_sampling_buffer(struct sf_buffer *sfb,
 				   unsigned long num_sdb, gfp_t gfp_flags)
 {
 	int i, rc;
-	unsigned long *new, *tail;
+	unsigned long *new, *tail, *tail_prev = NULL;
 
 	if (!sfb->sdbt || !sfb->tail)
 		return -EINVAL;

@@ -224,6 +224,7 @@ static int realloc_sampling_buffer(struct sf_buffer *sfb,
 			sfb->num_sdbt++;
 			/* Link current page to tail of chain */
 			*tail = (unsigned long)(void *) new + 1;
+			tail_prev = tail;
 			tail = new;
 		}

@@ -233,10 +234,22 @@ static int realloc_sampling_buffer(struct sf_buffer *sfb,
 		 * issue, a new realloc call (if required) might succeed.
 		 */
 		rc = alloc_sample_data_block(tail, gfp_flags);
-		if (rc)
+		if (rc) {
+			/* Undo last SDBT. An SDBT with no SDB at its first
+			 * entry but with an SDBT entry instead can not be
+			 * handled by the interrupt handler code.
+			 * Avoid this situation.
+			 */
+			if (tail_prev) {
+				sfb->num_sdbt--;
+				free_page((unsigned long) new);
+				tail = tail_prev;
+			}
 			break;
+		}
 		sfb->num_sdb++;
 		tail++;
+		tail_prev = new = NULL;	/* Allocated at least one SBD */
 	}
 
 	/* Link sampling buffer to its origin */

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #52 lore raw

PATCH 52/91 ocfs2: fix passing zero to PTR_ERR warning

From: Ding Xiang <[email protected]>

[ Upstream commit 188c523e1c271d537f3c9f55b6b65bf4476de32f ]

Fix a static code checker warning:
fs/ocfs2/acl.c:331
ocfs2_acl_chmod() warn: passing zero to 'PTR_ERR'

Link http://lkml.kernel.org/r/[email protected] open here

Fixes 5ee0fbd50fd ("ocfs2: revert using ocfs2_acl_chmod to avoid inode cluster lock hang")

Signed-off-by Ding Xiang <[email protected]>

Reviewed-by Joseph Qi <[email protected]>

Cc Mark Fasheh <[email protected]>

Cc Joel Becker <[email protected]>

Cc Junxiao Bi <[email protected]>

Cc Changwei Ge <[email protected]>

Cc Gang He <[email protected]>

Cc Jun Piao <[email protected]>

Signed-off-by Andrew Morton <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/ocfs2/acl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

fs/ocfs2/acl.c +2 -2

index 917fadca8a7b..b73b78771915 100644
@@ -335,8 +335,8 @@ int ocfs2_acl_chmod(struct inode *inode, struct buffer_head *bh)
 	down_read(&OCFS2_I(inode)->ip_xattr_sem);
 	acl = ocfs2_get_acl_nolock(inode, ACL_TYPE_ACCESS, bh);
 	up_read(&OCFS2_I(inode)->ip_xattr_sem);
-	if (IS_ERR(acl) || !acl)
-		return PTR_ERR(acl);
+	if (IS_ERR_OR_NULL(acl))
+		return PTR_ERR_OR_ZERO(acl);
 	ret = __posix_acl_chmod(&acl, GFP_KERNEL, inode->i_mode);
 	if (ret)
 		return ret;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:50 UTC #53 lore raw

PATCH 53/91 kernel: sysctl: make drop_caches write-only

From: Johannes Weiner <[email protected]>

[ Upstream commit 204cb79ad42f015312a5bbd7012d09c93d9b46fb ]

Currently, the drop_caches proc file and sysctl read back the last value written, suggesting this is somehow a stateful setting instead of a one-time command. Make it write-only, like e.g. compact_memory.

While mitigating a VM problem at scale in our fleet, there was confusion about whether writing to this file will permanently switch the kernel into a non-caching mode. This influences the decision making in a tense situation, where tens of people are trying to fix tens of thousands of affected machines: Do we need a rollback strategy? What are the performance implications of operating in a non-caching state for several days? It also caused confusion when the kernel team said we may need to write the file several times to make sure it's effective ("But it already reads back 3?").

Link http://lkml.kernel.org/r/[email protected] open here

Signed-off-by Johannes Weiner <[email protected]>

Acked-by Chris Down <[email protected]>

Acked-by Vlastimil Babka <[email protected]>

Acked-by David Hildenbrand <[email protected]>

Acked-by Michal Hocko <[email protected]>

Acked-by Alexey Dobriyan <[email protected]>

Signed-off-by Andrew Morton <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 kernel/sysctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

kernel/sysctl.c +1 -1

index cfc2c0d1369a..74fc3a9d1923 100644
@@ -1397,7 +1397,7 @@ static struct ctl_table vm_table[] = {
 		.procname	= "drop_caches",
 		.data		= &sysctl_drop_caches,
 		.maxlen		= sizeof(int),
-		.mode		= 0644,
+		.mode		= 0200,
 		.proc_handler	= drop_caches_sysctl_handler,
 		.extra1		= &one,
 		.extra2		= &four,

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:49 UTC #54 lore raw

PATCH 54/91 userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK

From: Mike Rapoport <[email protected]>

[ Upstream commit 3c1c24d91ffd536de0a64688a9df7f49e58fadbc ]

A while ago Andy noticed
(http://lkml.kernel.org/r/CALCETrWY+5ynDct7eU_nDUqx=okQvjm=Y5wJvA4ahBja=CQXGw@mail.gmail.com)
that UFFD_FEATURE_EVENT_FORK used by an unprivileged user may have security implications.

As the first step of the solution the following patch limits the availably of UFFD_FEATURE_EVENT_FORK only for those having CAP_SYS_PTRACE.

The usage of CAP_SYS_PTRACE ensures compatibility with CRIU.

Yet, if there are other users of non-cooperative userfaultfd that run without CAP_SYS_PTRACE, they would be broken :(

Current implementation of UFFD_FEATURE_EVENT_FORK modifies the file descriptor table from the read() implementation of uffd, which may have security implications for unprivileged use of the userfaultfd.

Limit availability of UFFD_FEATURE_EVENT_FORK only for callers that have CAP_SYS_PTRACE.

Link http://lkml.kernel.org/r/[email protected] open here

Signed-off-by Mike Rapoport <[email protected]>

Reviewed-by Andrea Arcangeli <[email protected]>

Cc Daniel Colascione <[email protected]>

Cc Jann Horn <[email protected]>

Cc Lokesh Gidra <[email protected]>

Cc Nick Kralevich <[email protected]>

Cc Nosh Minwalla <[email protected]>

Cc Pavel Emelyanov <[email protected]>

Cc Tim Murray <[email protected]>

Cc Aleksa Sarai <[email protected]>

Signed-off-by Andrew Morton <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 fs/userfaultfd.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

fs/userfaultfd.c +11 -7

index a609d480606d..e2b2196fd942 100644
@@ -1807,13 +1807,12 @@ static int userfaultfd_api(struct userfaultfd_ctx *ctx,
 	if (copy_from_user(&uffdio_api, buf, sizeof(uffdio_api)))
 		goto out;
 	features = uffdio_api.features;
-	if (uffdio_api.api != UFFD_API || (features & ~UFFD_API_FEATURES)) {
-		memset(&uffdio_api, 0, sizeof(uffdio_api));
-		if (copy_to_user(buf, &uffdio_api, sizeof(uffdio_api)))
-			goto out;
-		ret = -EINVAL;
-		goto out;
-	}
+	ret = -EINVAL;
+	if (uffdio_api.api != UFFD_API || (features & ~UFFD_API_FEATURES))
+		goto err_out;
+	ret = -EPERM;
+	if ((features & UFFD_FEATURE_EVENT_FORK) && !capable(CAP_SYS_PTRACE))
+		goto err_out;
 	/* report all available features and ioctls to userland */
 	uffdio_api.features = UFFD_API_FEATURES;
 	uffdio_api.ioctls = UFFD_API_IOCTLS;

@@ -1826,6 +1825,11 @@ static int userfaultfd_api(struct userfaultfd_ctx *ctx,
 	ret = 0;
 out:
 	return ret;
+err_out:
+	memset(&uffdio_api, 0, sizeof(uffdio_api));
+	if (copy_to_user(buf, &uffdio_api, sizeof(uffdio_api)))
+		ret = -EFAULT;
+	goto out;
 }
 
 static long userfaultfd_ioctl(struct file *file, unsigned cmd,

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #55 lore raw

PATCH 55/91 x86/mce: Fix possibly incorrect severity calculation on AMD

From: Jan H. Schönherr <[email protected]>

[ Upstream commit a3a57ddad061acc90bef39635caf2b2330ce8f21 ]

The function mce_severity_amd_smca() requires m->bank to be initialized for correct operation. Fix the one case, where mce_severity() is called without doing so.

Fixes 6bda529ec42e ("x86/mce: Grade uncorrected errors for SMCA-enabled systems")

Fixes d28af26faa0b ("x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out()")

Signed-off-by Jan H. Schönherr <[email protected]>

Signed-off-by Borislav Petkov <[email protected]>

Reviewed-by Tony Luck <[email protected]>

Cc "H. Peter Anvin" <[email protected]>

Cc Ingo Molnar <[email protected]>

Cc linux-edac <[email protected]>

Cc <[email protected]>

Cc Thomas Gleixner <[email protected]>

Cc x86-ml <[email protected]>

Cc Yazen Ghannam <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Sasha Levin <[email protected]>

---
 arch/x86/kernel/cpu/mcheck/mce.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

arch/x86/kernel/cpu/mcheck/mce.c +1 -1

index c7bd2e549a6a..0b0e44f85393 100644
@@ -802,8 +802,8 @@ static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp,
 		if (quirk_no_way_out)
 			quirk_no_way_out(i, m, regs);
 
+		m->bank = i;
 		if (mce_severity(m, mca_cfg.tolerant, &tmp, true) >= MCE_PANIC_SEVERITY) {
-			m->bank = i;
 			mce_read_aux(m, i);
 			*msg = tmp;
 			return 1;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #56 lore raw

PATCH 56/91 net, sysctl: Fix compiler warning when only cBPF is present

Link https://lore.kernel.org/bpf/[email protected] open here

From: Alexander Lobakin <[email protected]>

[ Upstream commit 1148f9adbe71415836a18a36c1b4ece999ab0973 ]

proc_dointvec_minmax_bpf_restricted() has been firstly introduced in commit 2e4a30983b0f ("bpf: restrict access to core bpf sysctls") under CONFIG_HAVE_EBPF_JIT. Then, this ifdef has been removed in ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations"), because a new sysctl, bpf_jit_limit, made use of it. Finally, this parameter has become long instead of integer with fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K") and thus, a new proc_dolongvec_minmax_bpf_restricted() has been added.

With this last change, we got back to that proc_dointvec_minmax_bpf_restricted() is used only under CONFIG_HAVE_EBPF_JIT, but the corresponding ifdef has not been brought back.

So, in configurations like CONFIG_BPF_JIT=y && CONFIG_HAVE_EBPF_JIT=n since v4.20 we have:

CC net/core/sysctl_net_core.o
net/core/sysctl_net_core.c:292:1: warning: ‘proc_dointvec_minmax_bpf_restricted’ defined but not used [-Wunused-function]
292 | proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,

      | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Suppress this by guarding it with CONFIG_HAVE_EBPF_JIT again.

Fixes fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")

Signed-off-by Alexander Lobakin <[email protected]>

Signed-off-by Daniel Borkmann <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/core/sysctl_net_core.c | 2 ++
 1 file changed, 2 insertions(+)

net/core/sysctl_net_core.c +2 -0

index 144cd1acd7e3..069e3c4fcc44 100644
@@ -274,6 +274,7 @@ static int proc_dointvec_minmax_bpf_enable(struct ctl_table *table, int write,
 	return ret;
 }
 
+# ifdef CONFIG_HAVE_EBPF_JIT
 static int
 proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
 				    void __user *buffer, size_t *lenp,

@@ -284,6 +285,7 @@ proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
 
 	return proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 }
+# endif /* CONFIG_HAVE_EBPF_JIT */
 
 static int
 proc_dolongvec_minmax_bpf_restricted(struct ctl_table *table, int write,

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #57 lore raw

PATCH 57/91 netfilter: nf_queue: enqueue skbs with NULL dst

From: Marco Oliverio <[email protected]>

[ Upstream commit 0b9173f4688dfa7c5d723426be1d979c24ce3d51 ]

Bridge packets that are forwarded have skb->dst == NULL and get dropped by the check introduced by b60a77386b1d4868f72f6353d35dabe5fbe981f2 (net: make skb_dst_force return true when dst is refcounted).

To fix this we check skb_dst() before skb_dst_force(), so we don't drop skb packet with dst == NULL. This holds also for skb at the PRE_ROUTING hook so we remove the second check.

Fixes b60a77386b1d ("net: make skb_dst_force return true when dst is refcounted")

Signed-off-by Marco Oliverio <[email protected]>

Signed-off-by Rocco Folino <[email protected]>

Acked-by Florian Westphal <[email protected]>

Signed-off-by Pablo Neira Ayuso <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 net/netfilter/nf_queue.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/netfilter/nf_queue.c +1 -1

index 37efcc1c8887..b06ef4c62522 100644
@@ -138,7 +138,7 @@ static int __nf_queue(struct sk_buff *skb, const struct nf_hook_state *state,
 		goto err;
 	}
 
-	if (!skb_dst_force(skb) && state->hook != NF_INET_PRE_ROUTING) {
+	if (skb_dst(skb) && !skb_dst_force(skb)) {
 		status = -ENETDOWN;
 		goto err;
 	}

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #58 lore raw

PATCH 58/91 ALSA: hda - Downgrade error message for single-cmd fallback

From: Takashi Iwai <[email protected]>

[ Upstream commit 475feec0c41ad71cb7d02f0310e56256606b57c5 ]

We made the error message for the CORB/RIRB communication clearer by upgrading to dev_WARN() so that user can notice better. But this struck us like a boomerang: now it caught syzbot and reported back as a fatal issue although it's not really any too serious bug that worth for stopping the whole system.

OK, OK, let's be softy, downgrade it to the standard dev_err() again.

Fixes dd65f7e19c69 ("ALSA: hda - Show the fatal CORB/RIRB error more clearly")

Reported-by [email protected]

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Takashi Iwai <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 sound/pci/hda/hda_controller.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

sound/pci/hda/hda_controller.c +1 -1

index 8fcb421193e0..fa261b27d858 100644
@@ -883,7 +883,7 @@ static int azx_rirb_get_response(struct hdac_bus *bus, unsigned int addr,
 		return -EAGAIN; /* give a chance to retry */
 	}
 
-	dev_WARN(chip->card->dev,
+	dev_err(chip->card->dev,
 		"azx_get_response timeout, switching to single_cmd mode: last cmd=0x%08x\n",
 		bus->last_cmd[addr]);
 	chip->single_cmd = 1;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:49 UTC #59 lore raw

PATCH 59/91 bonding: fix active-backup transition after link failure

From: Mahesh Bandewar <[email protected]>

[ Upstream commit 5d485ed88d48f8101a2067348e267c0aaf4ed486 ]

After the recent fix in commit 1899bb325149 ("bonding: fix state transition issue in link monitoring"), the active-backup mode with miimon initially come-up fine but after a link-failure, both members transition into backup state.

Following steps to reproduce the scenario (eth1 and eth2 are the slaves of the bond):

ip link set eth1 up
ip link set eth2 down
sleep 1
ip link set eth2 up
ip link set eth1 down
cat /sys/class/net/eth1/bonding_slave/state
cat /sys/class/net/eth2/bonding_slave/state

Fixes 1899bb325149 ("bonding: fix state transition issue in link monitoring")

CC Jay Vosburgh <[email protected]>

Signed-off-by Mahesh Bandewar <[email protected]>

Acked-by Jay Vosburgh <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/net/bonding/bond_main.c | 3 ---
 1 file changed, 3 deletions(-)

drivers/net/bonding/bond_main.c +0 -3

index 5f6602cb191f..fef599eb822b 100644
@@ -2186,9 +2186,6 @@ static void bond_miimon_commit(struct bonding *bond)
 			} else if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
 				/* make it immediately active */
 				bond_set_active_slave(slave);
-			} else if (slave != primary) {
-				/* prevent it from being the active one */
-				bond_set_backup_slave(slave);
 			}
 
 			netdev_info(bond->dev, "link status definitely up for interface %s, %u Mbps %s duplex\n",

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #60 lore raw

PATCH 60/91 perf strbuf: Remove redundant va_end() in strbuf_addv()

From: Mattias Jacobsson <[email protected]>

commit 099be748865eece21362aee416c350c0b1ae34df upstream.

Each call to va_copy() should have one, and only one, corresponding call to va_end(). In strbuf_addv() some code paths result in va_end() getting called multiple times. Remove the superfluous va_end().

Signed-off-by Mattias Jacobsson <[email protected]>

Cc Jiri Olsa <[email protected]>

Cc Peter Zijlstra <[email protected]>

Cc Sanskriti Sharma <[email protected]>

Link http://lkml.kernel.org/r/[email protected] open here

Fixes ce49d8436cff ("perf strbuf: Match va_{add,copy} with va_end")

Signed-off-by Arnaldo Carvalho de Melo <[email protected]>

Signed-off-by Nobuhiro Iwamatsu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 tools/perf/util/strbuf.c |    1 -
 1 file changed, 1 deletion(-)

tools/perf/util/strbuf.c +0 -1

@@ -109,7 +109,6 @@ static int strbuf_addv(struct strbuf *sb
 			return ret;
 		}
 		len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap_saved);
-		va_end(ap_saved);
 		if (len > strbuf_avail(sb)) {
 			pr_debug("this should not happen, your vsnprintf is broken");
 			va_end(ap_saved);

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #61 lore raw

PATCH 61/91 Make filldir[64]() verify the directory entry filename is valid

Link https://lore.kernel.org/lkml/[email protected]/ open here

From: Linus Torvalds <[email protected]>

commit 8a23eb804ca4f2be909e372cf5a9e7b30ae476cd upstream.

This has been discussed several times, and now filesystem people are talking about doing it individually at the filesystem layer, so head that off at the pass and just do it in getdents{64}().

This is partially based on a patch by Jann Horn, but checks for NUL bytes as well, and somewhat simplified.

There's also commentary about how it might be better if invalid names due to filesystem corruption don't cause an immediate failure, but only an error at the end of the readdir(), so that people can still see the filenames that are ok.

There's also been discussion about just how much POSIX strictly speaking requires this since it's about filesystem corruption. It's really more "protect user space from bad behavior" as pointed out by Jann. But since Eric Biederman looked up the POSIX wording, here it is for context:

"From readdir:

The readdir() function shall return a pointer to a structure representing the directory entry at the current position in the directory stream specified by the argument dirp, and position the directory stream at the next entry. It shall return a null pointer upon reaching the end of the directory stream. The structure dirent defined in the <dirent.h> header describes a directory entry.

From definitions:

3.129 Directory Entry (or Link)

An object that associates a filename with a file. Several directory entries can associate names with the same file.

...

3.169 Filename

A name consisting of 1 to {NAME_MAX} bytes used to name a file. The characters composing the name may be selected from the set of all character values excluding the slash character and the null byte. The filenames dot and dot-dot have special meaning. A filename is sometimes referred to as a 'pathname component'."

Note that I didn't bother adding the checks to any legacy interfaces that nobody uses.

Also note that if this ends up being noticeable as a performance regression, we can fix that to do a much more optimized model that checks for both NUL and '/' at the same time one word at a time.

We haven't really tended to optimize 'memchr()', and it only checks for one pattern at a time anyway, and we really _should_ check for NUL too (but see the comment about "soft errors" in the code about why it currently only checks for '/')

See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name lookup code looks for pathname terminating characters in parallel.

Cc Alexander Viro <[email protected]>

Cc Jann Horn <[email protected]>

Cc Eric W. Biederman <[email protected]>

Signed-off-by Siddharth Chandrasekaran <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/readdir.c |   40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

fs/readdir.c +40 -0

@@ -66,6 +66,40 @@ out:
 EXPORT_SYMBOL(iterate_dir);
 
 /*
+ * POSIX says that a dirent name cannot contain NULL or a '/'.
+ *
+ * It's not 100% clear what we should really do in this case.
+ * The filesystem is clearly corrupted, but returning a hard
+ * error means that you now don't see any of the other names
+ * either, so that isn't a perfect alternative.
+ *
+ * And if you return an error, what error do you use? Several
+ * filesystems seem to have decided on EUCLEAN being the error
+ * code for EFSCORRUPTED, and that may be the error to use. Or
+ * just EIO, which is perhaps more obvious to users.
+ *
+ * In order to see the other file names in the directory, the
+ * caller might want to make this a "soft" error: skip the
+ * entry, and return the error at the end instead.
+ *
+ * Note that this should likely do a "memchr(name, 0, len)"
+ * check too, since that would be filesystem corruption as
+ * well. However, that case can't actually confuse user space,
+ * which has to do a strlen() on the name anyway to find the
+ * filename length, and the above "soft error" worry means
+ * that it's probably better left alone until we have that
+ * issue clarified.
+ */
+static int verify_dirent_name(const char *name, int len)
+{
+	if (WARN_ON_ONCE(!len))
+		return -EIO;
+	if (WARN_ON_ONCE(memchr(name, '/', len)))
+		return -EIO;
+	return 0;
+}
+
+/*
  * Traditional linux readdir() handling..
  *
  * "count=1" is a special case, meaning that the buffer is one

@@ -174,6 +208,9 @@ static int filldir(struct dir_context *c
 	int reclen = ALIGN(offsetof(struct linux_dirent, d_name) + namlen + 2,
 		sizeof(long));
 
+	buf->error = verify_dirent_name(name, namlen);
+	if (unlikely(buf->error))
+		return buf->error;
 	buf->error = -EINVAL;	/* only used if we fail.. */
 	if (reclen > buf->count)
 		return -EINVAL;

@@ -260,6 +297,9 @@ static int filldir64(struct dir_context
 	int reclen = ALIGN(offsetof(struct linux_dirent64, d_name) + namlen + 1,
 		sizeof(u64));
 
+	buf->error = verify_dirent_name(name, namlen);
+	if (unlikely(buf->error))
+		return buf->error;
 	buf->error = -EINVAL;	/* only used if we fail.. */
 	if (reclen > buf->count)
 		return -EINVAL;

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #62 lore raw

PATCH 62/91 filldir[64]: remove WARN_ON_ONCE() for bad directory entries

From: Linus Torvalds <[email protected]>

commit b9959c7a347d6adbb558fba7e36e9fef3cba3b07 upstream.

This was always meant to be a temporary thing, just for testing and to see if it actually ever triggered.

The only thing that reported it was syzbot doing disk image fuzzing, and then that warning is expected. So let's just remove it before -rc4, because the extra sanity testing should probably go to -stable, but we don't want the warning to do so.

Reported-by [email protected]

Fixes 8a23eb804ca4 ("Make filldir[64]() verify the directory entry filename is valid")

Signed-off-by Siddharth Chandrasekaran <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/readdir.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

fs/readdir.c +2 -2

@@ -92,9 +92,9 @@ EXPORT_SYMBOL(iterate_dir);
  */
 static int verify_dirent_name(const char *name, int len)
 {
-	if (WARN_ON_ONCE(!len))
+	if (!len)
 		return -EIO;
-	if (WARN_ON_ONCE(memchr(name, '/', len)))
+	if (memchr(name, '/', len))
 		return -EIO;
 	return 0;
 }

Greg Kroah-Hartman

author maintainer

2020-01-02 22:49 UTC #63 lore raw

PATCH 63/91 PCI/switchtec: Read all 64 bits of part_event_bitmap

From: Logan Gunthorpe <[email protected]>

commit 6acdf7e19b37cb3a9258603d0eab315079c19c5e upstream.

The part_event_bitmap register is 64 bits wide, so read it with ioread64() instead of the 32-bit ioread32().

Fixes 52eabba5bcdb ("switchtec: Add IOCTLs to the Switchtec driver")

Link https://lore.kernel.org/r/[email protected] open here

Reported-by Doug Meyer <[email protected]>

Signed-off-by Logan Gunthorpe <[email protected]>

Signed-off-by Bjorn Helgaas <[email protected]>

Cc [email protected] # v4.12+

Cc Kelvin Cao <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/pci/switch/switchtec.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/pci/switch/switchtec.c +1 -1

@@ -898,7 +898,7 @@ static int ioctl_event_summary(struct sw
 	u32 reg;
 
 	s.global = ioread32(&stdev->mmio_sw_event->global_summary);
-	s.part_bitmap = ioread32(&stdev->mmio_sw_event->part_event_bitmap);
+	s.part_bitmap = readq(&stdev->mmio_sw_event->part_event_bitmap);
 	s.local_part = ioread32(&stdev->mmio_part_cfg->part_event_summary);
 
 	for (i = 0; i < stdev->partition_count; i++) {

Greg Kroah-Hartman

author maintainer

2020-01-02 22:50 UTC #64 lore raw

PATCH 64/91 netfilter: ebtables: compat: reject all padding in matches/watchers

From: Florian Westphal <[email protected]>

commit e608f631f0ba5f1fc5ee2e260a3a35d13107cbfe upstream.

syzbot reported following splat:

BUG: KASAN: vmalloc-out-of-bounds in size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline]
BUG: KASAN: vmalloc-out-of-bounds in compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155
Read of size 4 at addr ffffc900004461f4 by task syz-executor267/7937

CPU: 1 PID: 7937 Comm: syz-executor267 Not tainted 5.5.0-rc1-syzkaller #0
 size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline]
 compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155
 compat_do_replace+0x344/0x720 net/bridge/netfilter/ebtables.c:2249
 compat_do_ebt_set_ctl+0x22f/0x27e net/bridge/netfilter/ebtables.c:2333
 [..]

Because padding isn't considered during computation of ->buf_user_offset, "total" is decremented by fewer bytes than it should.

Therefore, the first part of

if (*total < sizeof(*entry) || entry->next_offset < sizeof(*entry))

will pass, -- it should not have. This causes oob access:
entry->next_offset is past the vmalloced size.

Reject padding and check that computed user offset (sum of ebt_entry structure plus all individual matches/watchers/targets) is same value that userspace gave us as the offset of the next entry.

Reported-by [email protected]

Fixes 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support")

Signed-off-by Florian Westphal <[email protected]>

Signed-off-by Pablo Neira Ayuso <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/bridge/netfilter/ebtables.c |   33 ++++++++++++++++-----------------
 1 file changed, 16 insertions(+), 17 deletions(-)

net/bridge/netfilter/ebtables.c +16 ~~-17~~

@@ -1876,7 +1876,7 @@ static int ebt_buf_count(struct ebt_entr
 }
 
 static int ebt_buf_add(struct ebt_entries_buf_state *state,
-		       void *data, unsigned int sz)
+		       const void *data, unsigned int sz)
 {
 	if (state->buf_kern_start == NULL)
 		goto count_only;

@@ -1910,7 +1910,7 @@ enum compat_mwt {
 	EBT_COMPAT_TARGET,
 };
 
-static int compat_mtw_from_user(struct compat_ebt_entry_mwt *mwt,
+static int compat_mtw_from_user(const struct compat_ebt_entry_mwt *mwt,
 				enum compat_mwt compat_mwt,
 				struct ebt_entries_buf_state *state,
 				const unsigned char *base)

@@ -1986,22 +1986,23 @@ static int compat_mtw_from_user(struct c
 /* return size of all matches, watchers or target, including necessary
  * alignment and padding.
  */
-static int ebt_size_mwt(struct compat_ebt_entry_mwt *match32,
+static int ebt_size_mwt(const struct compat_ebt_entry_mwt *match32,
 			unsigned int size_left, enum compat_mwt type,
 			struct ebt_entries_buf_state *state, const void *base)
 {
+	const char *buf = (const char *)match32;
 	int growth = 0;
-	char *buf;
 
 	if (size_left == 0)
 		return 0;
 
-	buf = (char *) match32;
-
-	while (size_left >= sizeof(*match32)) {
+	do {
 		struct ebt_entry_match *match_kern;
 		int ret;
 
+		if (size_left < sizeof(*match32))
+			return -EINVAL;
+
 		match_kern = (struct ebt_entry_match *) state->buf_kern_start;
 		if (match_kern) {
 			char *tmp;

@@ -2038,22 +2039,18 @@ static int ebt_size_mwt(struct compat_eb
 		if (match_kern)
 			match_kern->match_size = ret;
 
-		/* rule should have no remaining data after target */
-		if (type == EBT_COMPAT_TARGET && size_left)
-			return -EINVAL;
-
 		match32 = (struct compat_ebt_entry_mwt *) buf;
-	}
+	} while (size_left);
 
 	return growth;
 }
 
 /* called for all ebt_entry structures. */
-static int size_entry_mwt(struct ebt_entry *entry, const unsigned char *base,
+static int size_entry_mwt(const struct ebt_entry *entry, const unsigned char *base,
 			  unsigned int *total,
 			  struct ebt_entries_buf_state *state)
 {
-	unsigned int i, j, startoff, new_offset = 0;
+	unsigned int i, j, startoff, next_expected_off, new_offset = 0;
 	/* stores match/watchers/targets & offset of next struct ebt_entry: */
 	unsigned int offsets[4];
 	unsigned int *offsets_update = NULL;

@@ -2140,11 +2137,13 @@ static int size_entry_mwt(struct ebt_ent
 			return ret;
 	}
 
-	startoff = state->buf_user_offset - startoff;
+	next_expected_off = state->buf_user_offset - startoff;
+	if (next_expected_off != entry->next_offset)
+		return -EINVAL;
 
-	if (WARN_ON(*total < startoff))
+	if (*total < entry->next_offset)
 		return -EINVAL;
-	*total -= startoff;
+	*total -= entry->next_offset;
 	return 0;
 }

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #65 lore raw

PATCH 65/91 6pack,mkiss: fix possible deadlock

From: Eric Dumazet <[email protected]>

commit 5c9934b6767b16ba60be22ec3cbd4379ad64170d upstream.

We got another syzbot report [1] that tells us we must use write_lock_irq()/write_unlock_irq() to avoid possible deadlock.

[1]

WARNING: inconsistent lock state
5.5.0-rc1-syzkaller #0 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-R} usage.
syz-executor826/9605 [HC1[1]:SC0[0]:HE0:SE1] takes:
ffffffff8a128718 (disc_data_lock){+-..}, at: sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138 {HARDIRQ-ON-W} state was registered at:

  lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
  __raw_write_lock_bh include/linux/rwlock_api_smp.h:203 [inline]
  _raw_write_lock_bh+0x33/0x50 kernel/locking/spinlock.c:319
  sixpack_close+0x1d/0x250 drivers/net/hamradio/6pack.c:657
  tty_ldisc_close.isra.0+0x119/0x1a0 drivers/tty/tty_ldisc.c:489
  tty_set_ldisc+0x230/0x6b0 drivers/tty/tty_ldisc.c:585
  tiocsetd drivers/tty/tty_io.c:2337 [inline]
  tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2597
  vfs_ioctl fs/ioctl.c:47 [inline]
  file_ioctl fs/ioctl.c:545 [inline]
  do_vfs_ioctl+0x977/0x14e0 fs/ioctl.c:732
  ksys_ioctl+0xab/0xd0 fs/ioctl.c:749
  __do_sys_ioctl fs/ioctl.c:756 [inline]
  __se_sys_ioctl fs/ioctl.c:754 [inline]
  __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:754
  do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
irq event stamp: 3946
hardirqs last  enabled at (3945): [<ffffffff87c86e43>] __raw_spin_unlock_irq include/linux/spinlock_api_smp.h:168 [inline]
hardirqs last  enabled at (3945): [<ffffffff87c86e43>] _raw_spin_unlock_irq+0x23/0x80 kernel/locking/spinlock.c:199
hardirqs last disabled at (3946): [<ffffffff8100675f>] trace_hardirqs_off_thunk+0x1a/0x1c arch/x86/entry/thunk_64.S:42
softirqs last  enabled at (2658): [<ffffffff86a8b4df>] spin_unlock_bh include/linux/spinlock.h:383 [inline]
softirqs last  enabled at (2658): [<ffffffff86a8b4df>] clusterip_netdev_event+0x46f/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:222
softirqs last disabled at (2656): [<ffffffff86a8b22b>] spin_lock_bh include/linux/spinlock.h:343 [inline]
softirqs last disabled at (2656): [<ffffffff86a8b22b>] clusterip_netdev_event+0x1bb/0x670 net/ipv4/netfilter/ipt_CLUSTERIP.c:196

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0
       ----
  lock(disc_data_lock);
  <Interrupt>
    lock(disc_data_lock);

*** DEADLOCK ***

5 locks held by syz-executor826/9605:
#0: ffff8880a905e198 (&tty->legacy_mutex){+.+.}, at: tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
#1: ffffffff899a56c0 (rcu_read_lock){....}, at: mutex_spin_on_owner+0x0/0x330 kernel/locking/mutex.c:413
#2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: spin_lock include/linux/spinlock.h:338 [inline]
#2: ffff8880a496a2b0 (&(&i->lock)->rlock){-.-.}, at: serial8250_interrupt+0x2d/0x1a0 drivers/tty/serial/8250/8250_core.c:116 #3: ffffffff8c104048 (&port_lock_key){-.-.}, at: serial8250_handle_irq.part.0+0x24/0x330 drivers/tty/serial/8250/8250_port.c:1823 #4: ffff8880a905e090 (&tty->ldisc_sem){++++}, at: tty_ldisc_ref+0x22/0x90 drivers/tty/tty_ldisc.c:288

stack backtrace:
CPU: 1 PID: 9605 Comm: syz-executor826 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_usage_bug.cold+0x327/0x378 kernel/locking/lockdep.c:3101
 valid_state kernel/locking/lockdep.c:3112 [inline]
 mark_lock_irq kernel/locking/lockdep.c:3309 [inline]
 mark_lock+0xbb4/0x1220 kernel/locking/lockdep.c:3666
 mark_usage kernel/locking/lockdep.c:3554 [inline]
 __lock_acquire+0x1e55/0x4a00 kernel/locking/lockdep.c:3909
 lock_acquire+0x190/0x410 kernel/locking/lockdep.c:4485
 __raw_read_lock include/linux/rwlock_api_smp.h:149 [inline]
 _raw_read_lock+0x32/0x50 kernel/locking/spinlock.c:223
 sp_get.isra.0+0x1d/0xf0 drivers/net/ppp/ppp_synctty.c:138
 sixpack_write_wakeup+0x25/0x340 drivers/net/hamradio/6pack.c:402
 tty_wakeup+0xe9/0x120 drivers/tty/tty_io.c:536
 tty_port_default_wakeup+0x2b/0x40 drivers/tty/tty_port.c:50
 tty_port_tty_wakeup+0x57/0x70 drivers/tty/tty_port.c:387
 uart_write_wakeup+0x46/0x70 drivers/tty/serial/serial_core.c:104
 serial8250_tx_chars+0x495/0xaf0 drivers/tty/serial/8250/8250_port.c:1761
 serial8250_handle_irq.part.0+0x2a2/0x330 drivers/tty/serial/8250/8250_port.c:1834
 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1820 [inline]
 serial8250_default_handle_irq+0xc0/0x150 drivers/tty/serial/8250/8250_port.c:1850
 serial8250_interrupt+0xf1/0x1a0 drivers/tty/serial/8250/8250_core.c:126
 __handle_irq_event_percpu+0x15d/0x970 kernel/irq/handle.c:149
 handle_irq_event_percpu+0x74/0x160 kernel/irq/handle.c:189
 handle_irq_event+0xa7/0x134 kernel/irq/handle.c:206
 handle_edge_irq+0x25e/0x8d0 kernel/irq/chip.c:830
 generic_handle_irq_desc include/linux/irqdesc.h:156 [inline]
 do_IRQ+0xde/0x280 arch/x86/kernel/irq.c:250
 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:607
 </IRQ>
RIP: 0010:cpu_relax arch/x86/include/asm/processor.h:685 [inline]
RIP: 0010:mutex_spin_on_owner+0x247/0x330 kernel/locking/mutex.c:579
Code: c3 be 08 00 00 00 4c 89 e7 e8 e5 06 59 00 4c 89 e0 48 c1 e8 03 42 80 3c 38 00 0f 85 e1 00 00 00 49 8b 04 24 a8 01 75 96 f3 90 <e9> 2f fe ff ff 0f 0b e8 0d 19 09 00 84 c0 0f 85 ff fd ff ff 48 c7
RSP: 0018:ffffc90001eafa20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd7
RAX: 0000000000000000 RBX: ffff88809fd9e0c0 RCX: 1ffffffff13266dd
RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000000
RBP: ffffc90001eafa60 R08: 1ffff11013d22898 R09: ffffed1013d22899
R10: ffffed1013d22898 R11: ffff88809e9144c7 R12: ffff8880a905e138
R13: ffff88809e9144c0 R14: 0000000000000000 R15: dffffc0000000000
 mutex_optimistic_spin kernel/locking/mutex.c:673 [inline]
 __mutex_lock_common kernel/locking/mutex.c:962 [inline]
 __mutex_lock+0x32b/0x13c0 kernel/locking/mutex.c:1106
 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1121
 tty_lock+0xc7/0x130 drivers/tty/tty_mutex.c:19
 tty_release+0xb5/0xe90 drivers/tty/tty_io.c:1665
 __fput+0x2ff/0x890 fs/file_table.c:280
 ____fput+0x16/0x20 fs/file_table.c:313
 task_work_run+0x145/0x1c0 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x8e7/0x2ef0 kernel/exit.c:797
 do_group_exit+0x135/0x360 kernel/exit.c:895
 __do_sys_exit_group kernel/exit.c:906 [inline]
 __se_sys_exit_group kernel/exit.c:904 [inline]
 __x64_sys_exit_group+0x44/0x50 kernel/exit.c:904
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x43fef8
Code: Bad RIP value.
RSP: 002b:00007ffdb07d2338 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043fef8
RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000
RBP: 00000000004bf730 R08: 00000000000000e7 R09: ffffffffffffffd0
R10: 00000000004002c8 R11: 0000000000000246 R12: 0000000000000001
R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000

Fixes 6e4e2f811bad ("6pack,mkiss: fix lock inconsistency")

Reported-by syzbot <[email protected]>

Cc Arnd Bergmann <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/hamradio/6pack.c |    4 ++--
 drivers/net/hamradio/mkiss.c |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

drivers/net/hamradio/6pack.c +2 -2

@@ -665,10 +665,10 @@ static void sixpack_close(struct tty_str
 {
 	struct sixpack *sp;
 
-	write_lock_bh(&disc_data_lock);
+	write_lock_irq(&disc_data_lock);
 	sp = tty->disc_data;
 	tty->disc_data = NULL;
-	write_unlock_bh(&disc_data_lock);
+	write_unlock_irq(&disc_data_lock);
 	if (!sp)
 		return;

drivers/net/hamradio/mkiss.c +2 -2

@@ -783,10 +783,10 @@ static void mkiss_close(struct tty_struc
 {
 	struct mkiss *ax;
 
-	write_lock_bh(&disc_data_lock);
+	write_lock_irq(&disc_data_lock);
 	ax = tty->disc_data;
 	tty->disc_data = NULL;
-	write_unlock_bh(&disc_data_lock);
+	write_unlock_irq(&disc_data_lock);
 
 	if (!ax)
 		return;

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #66 lore raw

PATCH 66/91 netfilter: bridge: make sure to pull arp header in br_nf_forward_arp()

From: Eric Dumazet <[email protected]>

commit 5604285839aaedfb23ebe297799c6e558939334d upstream.

syzbot is kind enough to remind us we need to call skb_may_pull()

BUG: KMSAN: uninit-value in br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
CPU: 1 PID: 11631 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
 __msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245
 br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
 nf_hook_entry_hookfn include/linux/netfilter.h:135 [inline]
 nf_hook_slow+0x18b/0x3f0 net/netfilter/core.c:512
 nf_hook include/linux/netfilter.h:260 [inline]
 NF_HOOK include/linux/netfilter.h:303 [inline]
 __br_forward+0x78f/0xe30 net/bridge/br_forward.c:109
 br_flood+0xef0/0xfe0 net/bridge/br_forward.c:234
 br_handle_frame_finish+0x1a77/0x1c20 net/bridge/br_input.c:162
 nf_hook_bridge_pre net/bridge/br_input.c:245 [inline]
 br_handle_frame+0xfb6/0x1eb0 net/bridge/br_input.c:348
 __netif_receive_skb_core+0x20b9/0x51a0 net/core/dev.c:4830
 __netif_receive_skb_one_core net/core/dev.c:4927 [inline]
 __netif_receive_skb net/core/dev.c:5043 [inline]
 process_backlog+0x610/0x13c0 net/core/dev.c:5874
 napi_poll net/core/dev.c:6311 [inline]
 net_rx_action+0x7a6/0x1aa0 net/core/dev.c:6379
 __do_softirq+0x4a1/0x83a kernel/softirq.c:293
 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1091
 </IRQ>
 do_softirq kernel/softirq.c:338 [inline]
 __local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:190
 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
 rcu_read_unlock_bh include/linux/rcupdate.h:688 [inline]
 __dev_queue_xmit+0x38e8/0x4200 net/core/dev.c:3819
 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3825
 packet_snd net/packet/af_packet.c:2959 [inline]
 packet_sendmsg+0x8234/0x9100 net/packet/af_packet.c:2984
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg net/socket.c:657 [inline]
 __sys_sendto+0xc44/0xc70 net/socket.c:1952
 __do_sys_sendto net/socket.c:1964 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:1960
 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960
 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45a679
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f0a3c9e5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 000000000045a679
RDX: 000000000000000e RSI: 0000000020000200 RDI: 0000000000000003
RBP: 000000000075bf20 R08: 00000000200000c0 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f0a3c9e66d4
R13: 00000000004c8ec1 R14: 00000000004dfe28 R15: 00000000ffffffff

Uninit was created at:

 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
 kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
 kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86
 slab_alloc_node mm/slub.c:2773 [inline]
 __kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381
 __kmalloc_reserve net/core/skbuff.c:141 [inline]
 __alloc_skb+0x306/0xa10 net/core/skbuff.c:209
 alloc_skb include/linux/skbuff.h:1049 [inline]
 alloc_skb_with_frags+0x18c/0xa80 net/core/skbuff.c:5662
 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2244
 packet_alloc_skb net/packet/af_packet.c:2807 [inline]
 packet_snd net/packet/af_packet.c:2902 [inline]
 packet_sendmsg+0x63a6/0x9100 net/packet/af_packet.c:2984
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg net/socket.c:657 [inline]
 __sys_sendto+0xc44/0xc70 net/socket.c:1952
 __do_sys_sendto net/socket.c:1964 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:1960
 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960
 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes c4e70a87d975 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c")

Reported-by syzbot <[email protected]>

Reviewed-by Florian Westphal <[email protected]>

Signed-off-by Pablo Neira Ayuso <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/bridge/br_netfilter_hooks.c |    3 +++
 1 file changed, 3 insertions(+)

net/bridge/br_netfilter_hooks.c +3 -0

@@ -643,6 +643,9 @@ static unsigned int br_nf_forward_arp(vo
 		nf_bridge_pull_encap_header(skb);
 	}
 
+	if (unlikely(!pskb_may_pull(skb, sizeof(struct arphdr))))
+		return NF_DROP;
+
 	if (arp_hdr(skb)->ar_pln != 4) {
 		if (IS_VLAN_ARP(skb))
 			nf_bridge_push_encap_header(skb);

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #67 lore raw

PATCH 67/91 inetpeer: fix data-race in inet_putpeer / inet_putpeer

From: Eric Dumazet <[email protected]>

commit 71685eb4ce80ae9c49eff82ca4dd15acab215de9 upstream.

We need to explicitely forbid read/store tearing in inet_peer_gc() and inet_putpeer().

The following syzbot report reminds us about inet_putpeer() running without a lock held.

BUG: KCSAN: data-race in inet_putpeer / inet_putpeer

write to 0xffff888121fb2ed0 of 4 bytes by interrupt on cpu 0:

 inet_putpeer+0x37/0xa0 net/ipv4/inetpeer.c:240
 ip4_frag_free+0x3d/0x50 net/ipv4/ip_fragment.c:102
 inet_frag_destroy_rcu+0x58/0x80 net/ipv4/inet_fragment.c:228
 __rcu_reclaim kernel/rcu/rcu.h:222 [inline]
 rcu_do_batch+0x256/0x5b0 kernel/rcu/tree.c:2157
 rcu_core+0x369/0x4d0 kernel/rcu/tree.c:2377
 rcu_core_si+0x12/0x20 kernel/rcu/tree.c:2386
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0xbb/0xe0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71
 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571
 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94
 cpuidle_idle_call kernel/sched/idle.c:154 [inline]
 do_idle+0x1af/0x280 kernel/sched/idle.c:263

write to 0xffff888121fb2ed0 of 4 bytes by interrupt on cpu 1:

 inet_putpeer+0x37/0xa0 net/ipv4/inetpeer.c:240
 ip4_frag_free+0x3d/0x50 net/ipv4/ip_fragment.c:102
 inet_frag_destroy_rcu+0x58/0x80 net/ipv4/inet_fragment.c:228
 __rcu_reclaim kernel/rcu/rcu.h:222 [inline]
 rcu_do_batch+0x256/0x5b0 kernel/rcu/tree.c:2157
 rcu_core+0x369/0x4d0 kernel/rcu/tree.c:2377
 rcu_core_si+0x12/0x20 kernel/rcu/tree.c:2386
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 run_ksoftirqd+0x46/0x60 kernel/softirq.c:603
 smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

Reported by Kernel Concurrency Sanitizer on:

CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes 4b9d9be839fd ("inetpeer: remove unused list")

Reported-by syzbot <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/ipv4/inetpeer.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

net/ipv4/inetpeer.c +10 -2

@@ -159,7 +159,12 @@ static void inet_peer_gc(struct inet_pee
 					base->total / inet_peer_threshold * HZ;
 	for (i = 0; i < gc_cnt; i++) {
 		p = gc_stack[i];
-		delta = (__u32)jiffies - p->dtime;
+
+		/* The READ_ONCE() pairs with the WRITE_ONCE()
+		 * in inet_putpeer()
+		 */
+		delta = (__u32)jiffies - READ_ONCE(p->dtime);
+
 		if (delta < ttl || !refcount_dec_if_one(&p->refcnt))
 			gc_stack[i] = NULL;
 	}

@@ -236,7 +241,10 @@ EXPORT_SYMBOL_GPL(inet_getpeer);
 
 void inet_putpeer(struct inet_peer *p)
 {
-	p->dtime = (__u32)jiffies;
+	/* The WRITE_ONCE() pairs with itself (we run lockless)
+	 * and the READ_ONCE() in inet_peer_gc()
+	 */
+	WRITE_ONCE(p->dtime, (__u32)jiffies);
 
 	if (refcount_dec_and_test(&p->refcnt))
 		call_rcu(&p->rcu, inetpeer_free_rcu);

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #68 lore raw

PATCH 68/91 net: add a READ_ONCE() in skb_peek_tail()

From: Eric Dumazet <[email protected]>

commit f8cc62ca3e660ae3fdaee533b1d554297cd2ae82 upstream.

skb_peek_tail() can be used without protection of a lock, as spotted by KCSAN [1]

In order to avoid load-stearing, add a READ_ONCE()

Note that the corresponding WRITE_ONCE() are already there.

[1]

BUG: KCSAN: data-race in sk_wait_data / skb_queue_tail

read to 0xffff8880b36a4118 of 8 bytes by task 20426 on cpu 1:

 skb_peek_tail include/linux/skbuff.h:1784 [inline]
 sk_wait_data+0x15b/0x250 net/core/sock.c:2477
 kcm_wait_data+0x112/0x1f0 net/kcm/kcmsock.c:1103
 kcm_recvmsg+0xac/0x320 net/kcm/kcmsock.c:1130
 sock_recvmsg_nosec net/socket.c:871 [inline]
 sock_recvmsg net/socket.c:889 [inline]
 sock_recvmsg+0x92/0xb0 net/socket.c:885
 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
 __do_sys_recvmmsg net/socket.c:2703 [inline]
 __se_sys_recvmmsg net/socket.c:2696 [inline]
 __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

write to 0xffff8880b36a4118 of 8 bytes by task 451 on cpu 0:

 __skb_insert include/linux/skbuff.h:1852 [inline]
 __skb_queue_before include/linux/skbuff.h:1958 [inline]
 __skb_queue_tail include/linux/skbuff.h:1991 [inline]
 skb_queue_tail+0x7e/0xc0 net/core/skbuff.c:3145
 kcm_queue_rcv_skb+0x202/0x310 net/kcm/kcmsock.c:206
 kcm_rcv_strparser+0x74/0x4b0 net/kcm/kcmsock.c:370
 __strp_recv+0x348/0xf50 net/strparser/strparser.c:309
 strp_recv+0x84/0xa0 net/strparser/strparser.c:343
 tcp_read_sock+0x174/0x5c0 net/ipv4/tcp.c:1639
 strp_read_sock+0xd4/0x140 net/strparser/strparser.c:366
 do_strp_work net/strparser/strparser.c:414 [inline]
 strp_work+0x9a/0xe0 net/strparser/strparser.c:423
 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
 worker_thread+0xa0/0x800 kernel/workqueue.c:2415
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

Reported by Kernel Concurrency Sanitizer on:

CPU: 0 PID: 451 Comm: kworker/u4:3 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: kstrp strp_work

Reported-by syzbot <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 include/linux/skbuff.h |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

include/linux/skbuff.h +4 -2

@@ -1655,7 +1655,7 @@ static inline struct sk_buff *skb_peek_n
  */
 static inline struct sk_buff *skb_peek_tail(const struct sk_buff_head *list_)
 {
-	struct sk_buff *skb = list_->prev;
+	struct sk_buff *skb = READ_ONCE(list_->prev);
 
 	if (skb == (struct sk_buff *)list_)
 		skb = NULL;

@@ -1723,7 +1723,9 @@ static inline void __skb_insert(struct s
 				struct sk_buff *prev, struct sk_buff *next,
 				struct sk_buff_head *list)
 {
-	/* see skb_queue_empty_lockless() for the opposite READ_ONCE() */
+	/* See skb_queue_empty_lockless() and skb_peek_tail()
+	 * for the opposite READ_ONCE()
+	 */
 	WRITE_ONCE(newsk->next, next);
 	WRITE_ONCE(newsk->prev, prev);
 	WRITE_ONCE(next->prev, newsk);

Greg Kroah-Hartman

author maintainer

2020-01-02 22:25 UTC #69 lore raw

PATCH 69/91 net: icmp: fix data-race in cmp_global_allow()

From: Eric Dumazet <[email protected]>

commit bbab7ef235031f6733b5429ae7877bfa22339712 upstream.

This code reads two global variables without protection of a lock. We need READ_ONCE()/WRITE_ONCE() pairs to avoid load/store-tearing and better document the intent.

KCSAN reported :

BUG: KCSAN: data-race in icmp_global_allow / icmp_global_allow

read to 0xffffffff861a8014 of 4 bytes by task 11201 on cpu 0:

 icmp_global_allow+0x36/0x1b0 net/ipv4/icmp.c:254
 icmpv6_global_allow net/ipv6/icmp.c:184 [inline]
 icmpv6_global_allow net/ipv6/icmp.c:179 [inline]
 icmp6_send+0x493/0x1140 net/ipv6/icmp.c:514
 icmpv6_send+0x71/0xb0 net/ipv6/ip6_icmp.c:43
 ip6_link_failure+0x43/0x180 net/ipv6/route.c:2640
 dst_link_failure include/net/dst.h:419 [inline]
 vti_xmit net/ipv4/ip_vti.c:243 [inline]
 vti_tunnel_xmit+0x27f/0xa50 net/ipv4/ip_vti.c:279
 __netdev_start_xmit include/linux/netdevice.h:4420 [inline]
 netdev_start_xmit include/linux/netdevice.h:4434 [inline]
 xmit_one net/core/dev.c:3280 [inline]
 dev_hard_start_xmit+0xef/0x430 net/core/dev.c:3296
 __dev_queue_xmit+0x14c9/0x1b60 net/core/dev.c:3873
 dev_queue_xmit+0x21/0x30 net/core/dev.c:3906
 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530
 neigh_output include/net/neighbour.h:511 [inline]
 ip6_finish_output2+0x7a6/0xec0 net/ipv6/ip6_output.c:116
 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
 __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175
 dst_output include/net/dst.h:436 [inline]
 ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179

write to 0xffffffff861a8014 of 4 bytes by task 11183 on cpu 1:

 icmp_global_allow+0x174/0x1b0 net/ipv4/icmp.c:272
 icmpv6_global_allow net/ipv6/icmp.c:184 [inline]
 icmpv6_global_allow net/ipv6/icmp.c:179 [inline]
 icmp6_send+0x493/0x1140 net/ipv6/icmp.c:514
 icmpv6_send+0x71/0xb0 net/ipv6/ip6_icmp.c:43
 ip6_link_failure+0x43/0x180 net/ipv6/route.c:2640
 dst_link_failure include/net/dst.h:419 [inline]
 vti_xmit net/ipv4/ip_vti.c:243 [inline]
 vti_tunnel_xmit+0x27f/0xa50 net/ipv4/ip_vti.c:279
 __netdev_start_xmit include/linux/netdevice.h:4420 [inline]
 netdev_start_xmit include/linux/netdevice.h:4434 [inline]
 xmit_one net/core/dev.c:3280 [inline]
 dev_hard_start_xmit+0xef/0x430 net/core/dev.c:3296
 __dev_queue_xmit+0x14c9/0x1b60 net/core/dev.c:3873
 dev_queue_xmit+0x21/0x30 net/core/dev.c:3906
 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530
 neigh_output include/net/neighbour.h:511 [inline]
 ip6_finish_output2+0x7a6/0xec0 net/ipv6/ip6_output.c:116
 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline]
 __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127
 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175

Reported by Kernel Concurrency Sanitizer on:

CPU: 1 PID: 11183 Comm: syz-executor.2 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes 4cdf507d5452 ("icmp: add a global rate limitation")

Reported-by syzbot <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/ipv4/icmp.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

net/ipv4/icmp.c +6 -5

@@ -254,10 +254,11 @@ bool icmp_global_allow(void)
 	bool rc = false;
 
 	/* Check if token bucket is empty and cannot be refilled
-	 * without taking the spinlock.
+	 * without taking the spinlock. The READ_ONCE() are paired
+	 * with the following WRITE_ONCE() in this same function.
 	 */
-	if (!icmp_global.credit) {
-		delta = min_t(u32, now - icmp_global.stamp, HZ);
+	if (!READ_ONCE(icmp_global.credit)) {
+		delta = min_t(u32, now - READ_ONCE(icmp_global.stamp), HZ);
 		if (delta < HZ / 50)
 			return false;
 	}

@@ -267,14 +268,14 @@ bool icmp_global_allow(void)
 	if (delta >= HZ / 50) {
 		incr = sysctl_icmp_msgs_per_sec * delta / HZ ;
 		if (incr)
-			icmp_global.stamp = now;
+			WRITE_ONCE(icmp_global.stamp, now);
 	}
 	credit = min_t(u32, icmp_global.credit + incr, sysctl_icmp_msgs_burst);
 	if (credit) {
 		credit--;
 		rc = true;
 	}
-	icmp_global.credit = credit;
+	WRITE_ONCE(icmp_global.credit, credit);
 	spin_unlock(&icmp_global.lock);
 	return rc;
 }

Greg Kroah-Hartman

author maintainer

2020-01-02 22:50 UTC #70 lore raw

PATCH 70/91 hrtimer: Annotate lockless access to timer->state

From: Eric Dumazet <[email protected]>

commit 56144737e67329c9aaed15f942d46a6302e2e3d8 upstream.

syzbot reported various data-race caused by hrtimer_is_queued() reading timer->state. A READ_ONCE() is required there to silence the warning.

Also add the corresponding WRITE_ONCE() when timer->state is set.

In remove_hrtimer() the hrtimer_is_queued() helper is open coded to avoid loading timer->state twice.

KCSAN reported these cases:

BUG: KCSAN: data-race in __remove_hrtimer / tcp_pacing_check

write to 0xffff8880b2a7d388 of 1 bytes by interrupt on cpu 0:

 __remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991
 __run_hrtimer kernel/time/hrtimer.c:1496 [inline]
 __hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576
 hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 run_ksoftirqd+0x46/0x60 kernel/softirq.c:603
 smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165
 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

read to 0xffff8880b2a7d388 of 1 bytes by task 24652 on cpu 1:

 tcp_pacing_check net/ipv4/tcp_output.c:2235 [inline]
 tcp_pacing_check+0xba/0x130 net/ipv4/tcp_output.c:2225
 tcp_xmit_retransmit_queue+0x32c/0x5a0 net/ipv4/tcp_output.c:3044
 tcp_xmit_recovery+0x7c/0x120 net/ipv4/tcp_input.c:3558
 tcp_ack+0x17b6/0x3170 net/ipv4/tcp_input.c:3717
 tcp_rcv_established+0x37e/0xf50 net/ipv4/tcp_input.c:5696
 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561
 sk_backlog_rcv include/net/sock.h:945 [inline]
 __release_sock+0x135/0x1e0 net/core/sock.c:2435
 release_sock+0x61/0x160 net/core/sock.c:2951
 sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145
 tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393
 tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434
 inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0x9f/0xc0 net/socket.c:657

BUG: KCSAN: data-race in __remove_hrtimer / __tcp_ack_snd_check

write to 0xffff8880a3a65588 of 1 bytes by interrupt on cpu 0:

 __remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991
 __run_hrtimer kernel/time/hrtimer.c:1496 [inline]
 __hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576
 hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593
 __do_softirq+0x115/0x33f kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0xbb/0xe0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830

read to 0xffff8880a3a65588 of 1 bytes by task 22891 on cpu 1:

 __tcp_ack_snd_check+0x415/0x4f0 net/ipv4/tcp_input.c:5265
 tcp_ack_snd_check net/ipv4/tcp_input.c:5287 [inline]
 tcp_rcv_established+0x750/0xf50 net/ipv4/tcp_input.c:5708
 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561
 sk_backlog_rcv include/net/sock.h:945 [inline]
 __release_sock+0x135/0x1e0 net/core/sock.c:2435
 release_sock+0x61/0x160 net/core/sock.c:2951
 sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145
 tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393
 tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434
 inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0x9f/0xc0 net/socket.c:657
 __sys_sendto+0x21f/0x320 net/socket.c:1952
 __do_sys_sendto net/socket.c:1964 [inline]
 __se_sys_sendto net/socket.c:1960 [inline]
 __x64_sys_sendto+0x89/0xb0 net/socket.c:1960
 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290

Reported by Kernel Concurrency Sanitizer on:

CPU: 1 PID: 24652 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

[ tglx: Added comments ]

Reported-by syzbot <[email protected]>

Signed-off-by Thomas Gleixner <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 include/linux/hrtimer.h |   14 ++++++++++----
 kernel/time/hrtimer.c   |   11 +++++++----
 2 files changed, 17 insertions(+), 8 deletions(-)

include/linux/hrtimer.h +10 -4

@@ -408,12 +408,18 @@ extern u64 hrtimer_get_next_event(void);
 
 extern bool hrtimer_active(const struct hrtimer *timer);
 
-/*
- * Helper function to check, whether the timer is on one of the queues
+/**
+ * hrtimer_is_queued = check, whether the timer is on one of the queues
+ * @timer:	Timer to check
+ *
+ * Returns: True if the timer is queued, false otherwise
+ *
+ * The function can be used lockless, but it gives only a current snapshot.
  */
-static inline int hrtimer_is_queued(struct hrtimer *timer)
+static inline bool hrtimer_is_queued(struct hrtimer *timer)
 {
-	return timer->state & HRTIMER_STATE_ENQUEUED;
+	/* The READ_ONCE pairs with the update functions of timer->state */
+	return !!(READ_ONCE(timer->state) & HRTIMER_STATE_ENQUEUED);
 }
 
 /*

kernel/time/hrtimer.c +7 -4

@@ -845,7 +845,8 @@ static int enqueue_hrtimer(struct hrtime
 
 	base->cpu_base->active_bases |= 1 << base->index;
 
-	timer->state = HRTIMER_STATE_ENQUEUED;
+	/* Pairs with the lockless read in hrtimer_is_queued() */
+	WRITE_ONCE(timer->state, HRTIMER_STATE_ENQUEUED);
 
 	return timerqueue_add(&base->active, &timer->node);
 }

@@ -867,7 +868,8 @@ static void __remove_hrtimer(struct hrti
 	struct hrtimer_cpu_base *cpu_base = base->cpu_base;
 	u8 state = timer->state;
 
-	timer->state = newstate;
+	/* Pairs with the lockless read in hrtimer_is_queued() */
+	WRITE_ONCE(timer->state, newstate);
 	if (!(state & HRTIMER_STATE_ENQUEUED))
 		return;

@@ -894,8 +896,9 @@ static void __remove_hrtimer(struct hrti
 static inline int
 remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, bool restart)
 {
-	if (hrtimer_is_queued(timer)) {
-		u8 state = timer->state;
+	u8 state = timer->state;
+
+	if (state & HRTIMER_STATE_ENQUEUED) {
 		int reprogram;
 
 		/*

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #71 lore raw

PATCH 71/91 spi: fsl: dont map irq during probe

Link https://lore.kernel.org/r/518cfb83347d5372748e7fe72f94e2e9443d0d4a.1575905123.git.christophe.leroy@c-s.fr open here

From: Christophe Leroy <[email protected]>

[ Upstream commit 3194d2533efffae8b815d84729ecc58b6a9000ab ]

With lastest kernel, the following warning is observed at startup:

[    1.500609] ------------[ cut here ]------------
[    1.505225] remove_proc_entry: removing non-empty directory 'irq/22', leaking at least 'fsl_spi'
[    1.514234] WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:682 remove_proc_entry+0x198/0x1c0
[    1.522403] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.0-s3k-dev-02248-g93532430a4ff #2564
[    1.530724] NIP:  c0197694 LR: c0197694 CTR: c0050d80
[    1.535762] REGS: df4a5af0 TRAP: 0700   Not tainted  (5.4.0-02248-g93532430a4ff)
[    1.543818] MSR:  00029032 <EE,ME,IR,DR,RI>  CR: 22028222  XER: 00000000
[    1.550524]
[    1.550524] GPR00: c0197694 df4a5ba8 df4a0000 00000054 00000000 00000000 00004a38 00000010
[    1.550524] GPR08: c07c5a30 00000800 00000000 00001032 22000208 00000000 c0004b14 00000000
[    1.550524] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0830000 c07fc078
[    1.550524] GPR24: c08e8ca0 df665d10 df60ea98 c07c9db8 00000001 df5d5ae3 df5d5a80 df43f8e3
[    1.585327] NIP [c0197694] remove_proc_entry+0x198/0x1c0
[    1.590628] LR [c0197694] remove_proc_entry+0x198/0x1c0
[    1.595829] Call Trace:
[    1.598280] [df4a5ba8] [c0197694] remove_proc_entry+0x198/0x1c0 (unreliable)
[    1.605321] [df4a5bd8] [c0067acc] unregister_irq_proc+0x5c/0x70
[    1.611238] [df4a5bf8] [c005fbc4] free_desc+0x3c/0x80
[    1.616286] [df4a5c18] [c005fe2c] irq_free_descs+0x70/0xa8
[    1.621778] [df4a5c38] [c033d3fc] of_fsl_spi_probe+0xdc/0x3cc
[    1.627525] [df4a5c88] [c02f0f64] platform_drv_probe+0x44/0xa4
[    1.633350] [df4a5c98] [c02eee44] really_probe+0x1ac/0x418
[    1.638829] [df4a5cc8] [c02ed3e8] bus_for_each_drv+0x64/0xb0
[    1.644481] [df4a5cf8] [c02ef950] __device_attach+0xd4/0x128
[    1.650132] [df4a5d28] [c02ed61c] bus_probe_device+0xa0/0xbc
[    1.655783] [df4a5d48] [c02ebbe8] device_add+0x544/0x74c
[    1.661096] [df4a5d88] [c0382b78] of_platform_device_create_pdata+0xa4/0x100
[    1.668131] [df4a5da8] [c0382cf4] of_platform_bus_create+0x120/0x20c
[    1.674474] [df4a5df8] [c0382d50] of_platform_bus_create+0x17c/0x20c
[    1.680818] [df4a5e48] [c0382e88] of_platform_bus_probe+0x9c/0xf0
[    1.686907] [df4a5e68] [c0751404] __machine_initcall_cmpcpro_cmpcpro_declare_of_platform_devices+0x74/0x1a4
[    1.696629] [df4a5e98] [c072a4cc] do_one_initcall+0x8c/0x1d4
[    1.702282] [df4a5ef8] [c072a768] kernel_init_freeable+0x154/0x204
[    1.708455] [df4a5f28] [c0004b2c] kernel_init+0x18/0x110
[    1.713769] [df4a5f38] [c00122ac] ret_from_kernel_thread+0x14/0x1c
[    1.719926] Instruction dump:
[    1.722889] 2c030000 4182004c 3863ffb0 3c80c05f 80e3005c 388436a0 3c60c06d 7fa6eb78
[    1.730630] 7fe5fb78 38840280 38634178 4be8c611 <0fe00000> 4bffff6c 3c60c071 7fe4fb78
[    1.738556] ---[ end trace 05d0720bf2e352e2 ]---

The problem comes from the error path which calls irq_dispose_mapping() while the IRQ has been requested with devm_request_irq().

IRQ doesn't need to be mapped with irq_of_parse_and_map(). The only need is to get the IRQ virtual number. For that, use of_irq_to_resource() instead of the irq_of_parse_and_map()/irq_dispose_mapping() pair.

Fixes 500a32abaf81 ("spi: fsl: Call irq_dispose_mapping in err path")

Cc [email protected]

Signed-off-by Christophe Leroy <[email protected]>

Signed-off-by Mark Brown <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/spi/spi-fsl-spi.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

drivers/spi/spi-fsl-spi.c +2 -3

index 8f2e97857e8b..fb34ba3f2b23 100644
@@ -832,8 +832,8 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
 	if (ret)
 		goto err;
 
-	irq = irq_of_parse_and_map(np, 0);
-	if (!irq) {
+	irq = of_irq_to_resource(np, 0, NULL);
+	if (irq <= 0) {
 		ret = -EINVAL;
 		goto err;
 	}

@@ -847,7 +847,6 @@ static int of_fsl_spi_probe(struct platform_device *ofdev)
 	return 0;
 
 err:
-	irq_dispose_mapping(irq);
 	if (type == TYPE_FSL)
 		of_fsl_spi_free_chipselects(dev);
 	return ret;

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:50 UTC #72 lore raw

PATCH 72/91 tty/serial: atmel: fix out of range clock divider handling

From: David Engraf <[email protected]>

[ Upstream commit cb47b9f8630ae3fa3f5fbd0c7003faba7abdf711 ]

Use MCK_DIV8 when the clock divider is > 65535. Unfortunately the mode register was already written thus the clock selection is ignored.

Fix by doing the baud rate calulation before setting the mode.

Fixes 5bf5635ac170 ("tty/serial: atmel: add fractional baud rate support")

Signed-off-by David Engraf <[email protected]>

Acked-by Ludovic Desroches <[email protected]>

Acked-by Richard Genoud <[email protected]>

Cc stable <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/tty/serial/atmel_serial.c | 43 ++++++++++++++++---------------
 1 file changed, 22 insertions(+), 21 deletions(-)

drivers/tty/serial/atmel_serial.c +22 ~~-21~~

index 9ee41ba0e55b..367ce812743e 100644
@@ -2183,27 +2183,6 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 		mode |= ATMEL_US_USMODE_NORMAL;
 	}
 
-	/* set the mode, clock divisor, parity, stop bits and data size */
-	atmel_uart_writel(port, ATMEL_US_MR, mode);
-
-	/*
-	 * when switching the mode, set the RTS line state according to the
-	 * new mode, otherwise keep the former state
-	 */
-	if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) {
-		unsigned int rts_state;
-
-		if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
-			/* let the hardware control the RTS line */
-			rts_state = ATMEL_US_RTSDIS;
-		} else {
-			/* force RTS line to low level */
-			rts_state = ATMEL_US_RTSEN;
-		}
-
-		atmel_uart_writel(port, ATMEL_US_CR, rts_state);
-	}
-
 	/*
 	 * Set the baud rate:
 	 * Fractional baudrate allows to setup output frequency more

@@ -2229,6 +2208,28 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	quot = cd | fp << ATMEL_US_FP_OFFSET;
 
 	atmel_uart_writel(port, ATMEL_US_BRGR, quot);
+
+	/* set the mode, clock divisor, parity, stop bits and data size */
+	atmel_uart_writel(port, ATMEL_US_MR, mode);
+
+	/*
+	 * when switching the mode, set the RTS line state according to the
+	 * new mode, otherwise keep the former state
+	 */
+	if ((old_mode & ATMEL_US_USMODE) != (mode & ATMEL_US_USMODE)) {
+		unsigned int rts_state;
+
+		if ((mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_HWHS) {
+			/* let the hardware control the RTS line */
+			rts_state = ATMEL_US_RTSDIS;
+		} else {
+			/* force RTS line to low level */
+			rts_state = ATMEL_US_RTSEN;
+		}
+
+		atmel_uart_writel(port, ATMEL_US_CR, rts_state);
+	}
+
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
 	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #73 lore raw

PATCH 73/91 pinctrl: baytrail: Really serialize all register accesses

From: Hans de Goede <[email protected]>

[ Upstream commit 40ecab551232972a39cdd8b6f17ede54a3fdb296 ]

Commit 39ce8150a079 ("pinctrl: baytrail: Serialize all register access") added a spinlock around all register accesses because:

"There is a hardware issue in Intel Baytrail where concurrent GPIO register
access might result reads of 0xffffffff and writes might get dropped completely."

Testing has shown that this does not catch all cases, there are still 2 problems remaining

1) The original fix uses a spinlock per byt_gpio device / struct, additional testing has shown that this is not sufficient concurent accesses to 2 different GPIO banks also suffer from the same problem.

This commit fixes this by moving to a single global lock.

2) The original fix did not add a lock around the register accesses in the suspend/resume handling.

Since pinctrl-baytrail.c is using normal suspend/resume handlers, interrupts are still enabled during suspend/resume handling. Nothing should be using the GPIOs when they are being taken down, _but_ the GPIOs themselves may still cause interrupts, which are likely to use (read) the triggering GPIO. So we need to protect against concurrent GPIO register accesses in the suspend/resume handlers too.

This commit fixes this by adding the missing spin_lock / unlock calls.

The 2 fixes together fix the Acer Switch 10 SW5-012 getting completely confused after a suspend resume. The DSDT for this device has a bug in its _LID method which reprograms the home and power button trigger- flags requesting both high and low _level_ interrupts so the IRQs for these 2 GPIOs continuously fire. This combined with the saving of registers during suspend, triggers concurrent GPIO register accesses resulting in saving 0xffffffff as pconf0 value during suspend and then when restoring this on resume the pinmux settings get all messed up, resulting in various I2C busses being stuck, the wifi no longer working and often the tablet simply not coming out of suspend at all.

Cc [email protected]

Fixes 39ce8150a079 ("pinctrl: baytrail: Serialize all register access")

Signed-off-by Hans de Goede <[email protected]>

Acked-by Mika Westerberg <[email protected]>

Signed-off-by Andy Shevchenko <[email protected]>

Signed-off-by Sasha Levin <[email protected]>

---
 drivers/pinctrl/intel/pinctrl-baytrail.c | 81 +++++++++++++-----------
 1 file changed, 44 insertions(+), 37 deletions(-)

drivers/pinctrl/intel/pinctrl-baytrail.c +44 ~~-37~~

index beeb7cbb5015..9df5d29d708d 100644
@@ -204,7 +204,6 @@ struct byt_gpio {
 	struct platform_device *pdev;
 	struct pinctrl_dev *pctl_dev;
 	struct pinctrl_desc pctl_desc;
-	raw_spinlock_t lock;
 	const struct byt_pinctrl_soc_data *soc_data;
 	struct byt_community *communities_copy;
 	struct byt_gpio_pin_context *saved_context;

@@ -715,6 +714,8 @@ static const struct byt_pinctrl_soc_data *byt_soc_data[] = {
 	NULL,
 };
 
+static DEFINE_RAW_SPINLOCK(byt_lock);
+
 static struct byt_community *byt_get_community(struct byt_gpio *vg,
 					       unsigned int pin)
 {

@@ -856,7 +857,7 @@ static void byt_set_group_simple_mux(struct byt_gpio *vg,
 	unsigned long flags;
 	int i;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 
 	for (i = 0; i < group.npins; i++) {
 		void __iomem *padcfg0;

@@ -876,7 +877,7 @@ static void byt_set_group_simple_mux(struct byt_gpio *vg,
 		writel(value, padcfg0);
 	}
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 }
 
 static void byt_set_group_mixed_mux(struct byt_gpio *vg,

@@ -886,7 +887,7 @@ static void byt_set_group_mixed_mux(struct byt_gpio *vg,
 	unsigned long flags;
 	int i;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 
 	for (i = 0; i < group.npins; i++) {
 		void __iomem *padcfg0;

@@ -906,7 +907,7 @@ static void byt_set_group_mixed_mux(struct byt_gpio *vg,
 		writel(value, padcfg0);
 	}
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 }
 
 static int byt_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,

@@ -955,11 +956,11 @@ static void byt_gpio_clear_triggering(struct byt_gpio *vg, unsigned int offset)
 	unsigned long flags;
 	u32 value;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	value = readl(reg);
 	value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
 	writel(value, reg);
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 }
 
 static int byt_gpio_request_enable(struct pinctrl_dev *pctl_dev,

@@ -971,7 +972,7 @@ static int byt_gpio_request_enable(struct pinctrl_dev *pctl_dev,
 	u32 value, gpio_mux;
 	unsigned long flags;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 
 	/*
 	 * In most cases, func pin mux 000 means GPIO function.

@@ -993,7 +994,7 @@ static int byt_gpio_request_enable(struct pinctrl_dev *pctl_dev,
 			 "pin %u forcibly re-configured as GPIO\n", offset);
 	}
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	pm_runtime_get(&vg->pdev->dev);

@@ -1021,7 +1022,7 @@ static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev,
 	unsigned long flags;
 	u32 value;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 
 	value = readl(val_reg);
 	value &= ~BYT_DIR_MASK;

@@ -1038,7 +1039,7 @@ static int byt_gpio_set_direction(struct pinctrl_dev *pctl_dev,
 		     "Potential Error: Setting GPIO with direct_irq_en to output");
 	writel(value, val_reg);
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	return 0;
 }

@@ -1107,11 +1108,11 @@ static int byt_pin_config_get(struct pinctrl_dev *pctl_dev, unsigned int offset,
 	u32 conf, pull, val, debounce;
 	u16 arg = 0;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	conf = readl(conf_reg);
 	pull = conf & BYT_PULL_ASSIGN_MASK;
 	val = readl(val_reg);
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:

@@ -1138,9 +1139,9 @@ static int byt_pin_config_get(struct pinctrl_dev *pctl_dev, unsigned int offset,
 		if (!(conf & BYT_DEBOUNCE_EN))
 			return -EINVAL;
 
-		raw_spin_lock_irqsave(&vg->lock, flags);
+		raw_spin_lock_irqsave(&byt_lock, flags);
 		debounce = readl(db_reg);
-		raw_spin_unlock_irqrestore(&vg->lock, flags);
+		raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 		switch (debounce & BYT_DEBOUNCE_PULSE_MASK) {
 		case BYT_DEBOUNCE_PULSE_375US:

@@ -1192,7 +1193,7 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
 	u32 conf, val, debounce;
 	int i, ret = 0;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 
 	conf = readl(conf_reg);
 	val = readl(val_reg);

@@ -1300,7 +1301,7 @@ static int byt_pin_config_set(struct pinctrl_dev *pctl_dev,
 	if (!ret)
 		writel(conf, conf_reg);
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	return ret;
 }

@@ -1325,9 +1326,9 @@ static int byt_gpio_get(struct gpio_chip *chip, unsigned offset)
 	unsigned long flags;
 	u32 val;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	val = readl(reg);
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	return !!(val & BYT_LEVEL);
 }

@@ -1342,13 +1343,13 @@ static void byt_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	if (!reg)
 		return;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	old_val = readl(reg);
 	if (value)
 		writel(old_val | BYT_LEVEL, reg);
 	else
 		writel(old_val & ~BYT_LEVEL, reg);
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 }
 
 static int byt_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)

@@ -1361,9 +1362,9 @@ static int byt_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
 	if (!reg)
 		return -EINVAL;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	value = readl(reg);
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	if (!(value & BYT_OUTPUT_EN))
 		return GPIOF_DIR_OUT;

@@ -1406,14 +1407,14 @@ static void byt_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 		const char *label;
 		unsigned int pin;
 
-		raw_spin_lock_irqsave(&vg->lock, flags);
+		raw_spin_lock_irqsave(&byt_lock, flags);
 		pin = vg->soc_data->pins[i].number;
 		reg = byt_gpio_reg(vg, pin, BYT_CONF0_REG);
 		if (!reg) {
 			seq_printf(s,
 				   "Could not retrieve pin %i conf0 reg\n",
 				   pin);
-			raw_spin_unlock_irqrestore(&vg->lock, flags);
+			raw_spin_unlock_irqrestore(&byt_lock, flags);
 			continue;
 		}
 		conf0 = readl(reg);

@@ -1422,11 +1423,11 @@ static void byt_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 		if (!reg) {
 			seq_printf(s,
 				   "Could not retrieve pin %i val reg\n", pin);
-			raw_spin_unlock_irqrestore(&vg->lock, flags);
+			raw_spin_unlock_irqrestore(&byt_lock, flags);
 			continue;
 		}
 		val = readl(reg);
-		raw_spin_unlock_irqrestore(&vg->lock, flags);
+		raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 		comm = byt_get_community(vg, pin);
 		if (!comm) {

@@ -1510,9 +1511,9 @@ static void byt_irq_ack(struct irq_data *d)
 	if (!reg)
 		return;
 
-	raw_spin_lock(&vg->lock);
+	raw_spin_lock(&byt_lock);
 	writel(BIT(offset % 32), reg);
-	raw_spin_unlock(&vg->lock);
+	raw_spin_unlock(&byt_lock);
 }
 
 static void byt_irq_mask(struct irq_data *d)

@@ -1536,7 +1537,7 @@ static void byt_irq_unmask(struct irq_data *d)
 	if (!reg)
 		return;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	value = readl(reg);
 
 	switch (irqd_get_trigger_type(d)) {

@@ -1557,7 +1558,7 @@ static void byt_irq_unmask(struct irq_data *d)
 
 	writel(value, reg);
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 }
 
 static int byt_irq_type(struct irq_data *d, unsigned int type)

@@ -1571,7 +1572,7 @@ static int byt_irq_type(struct irq_data *d, unsigned int type)
 	if (!reg || offset >= vg->chip.ngpio)
 		return -EINVAL;
 
-	raw_spin_lock_irqsave(&vg->lock, flags);
+	raw_spin_lock_irqsave(&byt_lock, flags);
 	value = readl(reg);
 
 	WARN(value & BYT_DIRECT_IRQ_EN,

@@ -1593,7 +1594,7 @@ static int byt_irq_type(struct irq_data *d, unsigned int type)
 	else if (type & IRQ_TYPE_LEVEL_MASK)
 		irq_set_handler_locked(d, handle_level_irq);
 
-	raw_spin_unlock_irqrestore(&vg->lock, flags);
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 
 	return 0;
 }

@@ -1629,9 +1630,9 @@ static void byt_gpio_irq_handler(struct irq_desc *desc)
 			continue;
 		}
 
-		raw_spin_lock(&vg->lock);
+		raw_spin_lock(&byt_lock);
 		pending = readl(reg);
-		raw_spin_unlock(&vg->lock);
+		raw_spin_unlock(&byt_lock);
 		for_each_set_bit(pin, &pending, 32) {
 			virq = irq_find_mapping(vg->chip.irqdomain, base + pin);
 			generic_handle_irq(virq);

@@ -1833,8 +1834,6 @@ static int byt_pinctrl_probe(struct platform_device *pdev)
 		return PTR_ERR(vg->pctl_dev);
 	}
 
-	raw_spin_lock_init(&vg->lock);
-
 	ret = byt_gpio_probe(vg);
 	if (ret)
 		return ret;

@@ -1850,8 +1849,11 @@ static int byt_gpio_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct byt_gpio *vg = platform_get_drvdata(pdev);
+	unsigned long flags;
 	int i;
 
+	raw_spin_lock_irqsave(&byt_lock, flags);
+
 	for (i = 0; i < vg->soc_data->npins; i++) {
 		void __iomem *reg;
 		u32 value;

@@ -1872,6 +1874,7 @@ static int byt_gpio_suspend(struct device *dev)
 		vg->saved_context[i].val = value;
 	}
 
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 	return 0;
 }

@@ -1879,8 +1882,11 @@ static int byt_gpio_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct byt_gpio *vg = platform_get_drvdata(pdev);
+	unsigned long flags;
 	int i;
 
+	raw_spin_lock_irqsave(&byt_lock, flags);
+
 	for (i = 0; i < vg->soc_data->npins; i++) {
 		void __iomem *reg;
 		u32 value;

@@ -1918,6 +1924,7 @@ static int byt_gpio_resume(struct device *dev)
 		}
 	}
 
+	raw_spin_unlock_irqrestore(&byt_lock, flags);
 	return 0;
 }
 #endif

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #74 lore raw

PATCH 74/91 net: ena: fix napi handler misbehavior when the napi budget is zero

From: Netanel Belgazal <[email protected]>

[ Upstream commit 24dee0c7478d1a1e00abdf5625b7f921467325dc ]

In netpoll the napi handler could be called with budget equal to zero. Current ENA napi handler doesn't take that into consideration.

The napi handler handles Rx packets in a do-while loop. Currently, the budget check happens only after decrementing the budget, therefore the napi handler, in rare cases, could run over MAX_INT packets.

In addition to that, this moves all budget related variables to int calculation and stop mixing u32 to avoid ambiguity

Fixes 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")

Signed-off-by Netanel Belgazal <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/ethernet/amazon/ena/ena_netdev.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

drivers/net/ethernet/amazon/ena/ena_netdev.c +7 -3

@@ -1196,8 +1196,8 @@ static int ena_io_poll(struct napi_struc
 	struct ena_napi *ena_napi = container_of(napi, struct ena_napi, napi);
 	struct ena_ring *tx_ring, *rx_ring;
 
-	u32 tx_work_done;
-	u32 rx_work_done;
+	int tx_work_done;
+	int rx_work_done = 0;
 	int tx_budget;
 	int napi_comp_call = 0;
 	int ret;

@@ -1214,7 +1214,11 @@ static int ena_io_poll(struct napi_struc
 	}
 
 	tx_work_done = ena_clean_tx_irq(tx_ring, tx_budget);
-	rx_work_done = ena_clean_rx_irq(rx_ring, napi, budget);
+	/* On netpoll the budget is zero and the handler should only clean the
+	 * tx completions.
+	 */
+	if (likely(budget))
+		rx_work_done = ena_clean_rx_irq(rx_ring, napi, budget);
 
 	/* If the device is about to reset or down, avoid unmask
 	 * the interrupt and return 0 so NAPI won't reschedule

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #75 lore raw

PATCH 75/91 net/mlxfw: Fix out-of-memory error in mfa2 flash burning

From: Vladyslav Tarasiuk <[email protected]>

[ Upstream commit a5bcd72e054aabb93ddc51ed8cde36a5bfc50271 ]

The burning process requires to perform internal allocations of large chunks of memory. This memory doesn't need to be contiguous and can be safely allocated by vzalloc() instead of kzalloc(). This patch changes such allocation to avoid possible out-of-memory failure.

Fixes 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process")

Signed-off-by Vladyslav Tarasiuk <[email protected]>

Reviewed-by Aya Levin <[email protected]>

Signed-off-by Leon Romanovsky <[email protected]>

Tested-by Ido Schimmel <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c +4 -3

@@ -37,6 +37,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/netlink.h>
+#include <linux/vmalloc.h>
 #include <linux/xz.h>
 #include "mlxfw_mfa2.h"
 #include "mlxfw_mfa2_file.h"

@@ -579,7 +580,7 @@ mlxfw_mfa2_file_component_get(const stru
 	comp_size = be32_to_cpu(comp->size);
 	comp_buf_size = comp_size + mlxfw_mfa2_comp_magic_len;
 
-	comp_data = kmalloc(sizeof(*comp_data) + comp_buf_size, GFP_KERNEL);
+	comp_data = vzalloc(sizeof(*comp_data) + comp_buf_size);
 	if (!comp_data)
 		return ERR_PTR(-ENOMEM);
 	comp_data->comp.data_size = comp_size;

@@ -601,7 +602,7 @@ mlxfw_mfa2_file_component_get(const stru
 	comp_data->comp.data = comp_data->buff + mlxfw_mfa2_comp_magic_len;
 	return &comp_data->comp;
 err_out:
-	kfree(comp_data);
+	vfree(comp_data);
 	return ERR_PTR(err);
 }

@@ -610,7 +611,7 @@ void mlxfw_mfa2_file_component_put(struc
 	const struct mlxfw_mfa2_comp_data *comp_data;
 
 	comp_data = container_of(comp, struct mlxfw_mfa2_comp_data, comp);
-	kfree(comp_data);
+	vfree(comp_data);
 }
 
 void mlxfw_mfa2_file_fini(struct mlxfw_mfa2_file *mfa2_file)

Greg Kroah-Hartman

author maintainer

2020-01-02 22:49 UTC #76 lore raw

PATCH 76/91 ptp: fix the race between the release of ptp_clock and cdev

Link https://lore.kernel.org/linux-fsdevel/[email protected]/T/#u open here

From: Vladis Dronov <[email protected]>

[ Upstream commit a33121e5487b424339636b25c35d3a180eaa5f5e ]

In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine:

ts# cat openptp0.c
int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r
5.5.0-rc3-46cf053e
ts# cat /proc/cmdline
... slub_debug=FZP
ts# modprobe ptp_kvm
ts# ./openptp0 &
[1] 670
opened /dev/ptp0, sleeping 10s...
ts# rmmod ptp_kvm
ts# ls /dev/ptp*
ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up

[   48.010809] general protection fault: 0000 [#1] SMP
[   48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25
[   48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
[   48.016270] RIP: 0010:module_put.part.0+0x7/0x80
[   48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202
[   48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0
[   48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b
[   48.019470] ...                                              ^^^ a slub poison
[   48.023854] Call Trace:
[   48.024050]  __fput+0x21f/0x240
[   48.024288]  task_work_run+0x79/0x90
[   48.024555]  do_exit+0x2af/0xab0
[   48.024799]  ? vfs_write+0x16a/0x190
[   48.025082]  do_group_exit+0x35/0x90
[   48.025387]  __x64_sys_exit_group+0xf/0x10
[   48.025737]  do_syscall_64+0x3d/0x130
[   48.026056]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   48.026479] RIP: 0033:0x7f53b12082f6
[   48.026792] ...
[   48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm]
[   48.045001] Fixing recursive fault but reboot is needed!

This happens in:

static void __fput(struct file *file)
{ ...

    if (file->f_op->release)
        file->f_op->release(inode, file); <<< cdev is kfree'd here
    if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL &&
             !(mode & FMODE_PATH))) {
        cdev_put(inode->i_cdev); <<< cdev fields are accessed here

Namely:

__fput()
posix_clock_release()
kref_put(&clk->kref, delete_clock) <<< the last reference
delete_clock()
delete_ptp_clock()
kfree(ptp) <<< cdev is embedded in ptp
cdev_put

    module_put(p->owner) <<< *p is kfree'd, bang!

Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two
refcounts: kref and cdev.kobj in posix_clock. This is wrong.

Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t.

This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device").

Analyzed-by Stephen Johnston <[email protected]>

Analyzed-by Vern Lovejoy <[email protected]>

Signed-off-by Vladis Dronov <[email protected]>

Acked-by Richard Cochran <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/ptp/ptp_clock.c     |   31 ++++++++++++++-----------------
 drivers/ptp/ptp_private.h   |    2 +-
 include/linux/posix-clock.h |   19 +++++++++++--------
 kernel/time/posix-clock.c   |   31 +++++++++++++------------------
 4 files changed, 39 insertions(+), 44 deletions(-)

drivers/ptp/ptp_clock.c +14 ~~-17~~

@@ -175,9 +175,9 @@ static struct posix_clock_operations ptp
 	.read		= ptp_read,
 };
 
-static void delete_ptp_clock(struct posix_clock *pc)
+static void ptp_clock_release(struct device *dev)
 {
-	struct ptp_clock *ptp = container_of(pc, struct ptp_clock, clock);
+	struct ptp_clock *ptp = container_of(dev, struct ptp_clock, dev);
 
 	mutex_destroy(&ptp->tsevq_mux);
 	mutex_destroy(&ptp->pincfg_mux);

@@ -222,7 +222,6 @@ struct ptp_clock *ptp_clock_register(str
 	}
 
 	ptp->clock.ops = ptp_clock_ops;
-	ptp->clock.release = delete_ptp_clock;
 	ptp->info = info;
 	ptp->devid = MKDEV(major, index);
 	ptp->index = index;

@@ -249,15 +248,6 @@ struct ptp_clock *ptp_clock_register(str
 	if (err)
 		goto no_pin_groups;
 
-	/* Create a new device in our class. */
-	ptp->dev = device_create_with_groups(ptp_class, parent, ptp->devid,
-					     ptp, ptp->pin_attr_groups,
-					     "ptp%d", ptp->index);
-	if (IS_ERR(ptp->dev)) {
-		err = PTR_ERR(ptp->dev);
-		goto no_device;
-	}
-
 	/* Register a new PPS source. */
 	if (info->pps) {
 		struct pps_source_info pps;

@@ -273,8 +263,18 @@ struct ptp_clock *ptp_clock_register(str
 		}
 	}
 
-	/* Create a posix clock. */
-	err = posix_clock_register(&ptp->clock, ptp->devid);
+	/* Initialize a new device of our class in our clock structure. */
+	device_initialize(&ptp->dev);
+	ptp->dev.devt = ptp->devid;
+	ptp->dev.class = ptp_class;
+	ptp->dev.parent = parent;
+	ptp->dev.groups = ptp->pin_attr_groups;
+	ptp->dev.release = ptp_clock_release;
+	dev_set_drvdata(&ptp->dev, ptp);
+	dev_set_name(&ptp->dev, "ptp%d", ptp->index);
+
+	/* Create a posix clock and link it to the device. */
+	err = posix_clock_register(&ptp->clock, &ptp->dev);
 	if (err) {
 		pr_err("failed to create posix clock\n");
 		goto no_clock;

@@ -286,8 +286,6 @@ no_clock:
 	if (ptp->pps_source)
 		pps_unregister_source(ptp->pps_source);
 no_pps:
-	device_destroy(ptp_class, ptp->devid);
-no_device:
 	ptp_cleanup_pin_groups(ptp);
 no_pin_groups:
 	if (ptp->kworker)

@@ -317,7 +315,6 @@ int ptp_clock_unregister(struct ptp_cloc
 	if (ptp->pps_source)
 		pps_unregister_source(ptp->pps_source);
 
-	device_destroy(ptp_class, ptp->devid);
 	ptp_cleanup_pin_groups(ptp);
 
 	posix_clock_unregister(&ptp->clock);

drivers/ptp/ptp_private.h +1 -1

@@ -41,7 +41,7 @@ struct timestamp_event_queue {
 
 struct ptp_clock {
 	struct posix_clock clock;
-	struct device *dev;
+	struct device dev;
 	struct ptp_clock_info *info;
 	dev_t devid;
 	int index; /* index into clocks.map */

include/linux/posix-clock.h +11 -8

@@ -82,29 +82,32 @@ struct posix_clock_operations {
  *
  * @ops:     Functional interface to the clock
  * @cdev:    Character device instance for this clock
- * @kref:    Reference count.
+ * @dev:     Pointer to the clock's device.
  * @rwsem:   Protects the 'zombie' field from concurrent access.
  * @zombie:  If 'zombie' is true, then the hardware has disappeared.
- * @release: A function to free the structure when the reference count reaches
- *           zero. May be NULL if structure is statically allocated.
  *
  * Drivers should embed their struct posix_clock within a private
  * structure, obtaining a reference to it during callbacks using
  * container_of().
+ *
+ * Drivers should supply an initialized but not exposed struct device
+ * to posix_clock_register(). It is used to manage lifetime of the
+ * driver's private structure. It's 'release' field should be set to
+ * a release function for this private structure.
  */
 struct posix_clock {
 	struct posix_clock_operations ops;
 	struct cdev cdev;
-	struct kref kref;
+	struct device *dev;
 	struct rw_semaphore rwsem;
 	bool zombie;
-	void (*release)(struct posix_clock *clk);
 };
 
 /**
  * posix_clock_register() - register a new clock
- * @clk:   Pointer to the clock. Caller must provide 'ops' and 'release'
- * @devid: Allocated device id
+ * @clk:   Pointer to the clock. Caller must provide 'ops' field
+ * @dev:   Pointer to the initialized device. Caller must provide
+ *         'release' field
  *
  * A clock driver calls this function to register itself with the
  * clock device subsystem. If 'clk' points to dynamically allocated

@@ -113,7 +116,7 @@ struct posix_clock {
  *
  * Returns zero on success, non-zero otherwise.
  */
-int posix_clock_register(struct posix_clock *clk, dev_t devid);
+int posix_clock_register(struct posix_clock *clk, struct device *dev);
 
 /**
  * posix_clock_unregister() - unregister a clock

kernel/time/posix-clock.c +13 ~~-18~~

@@ -27,8 +27,6 @@
 
 #include "posix-timers.h"
 
-static void delete_clock(struct kref *kref);
-
 /*
  * Returns NULL if the posix_clock instance attached to 'fp' is old and stale.
  */

@@ -138,7 +136,7 @@ static int posix_clock_open(struct inode
 		err = 0;
 
 	if (!err) {
-		kref_get(&clk->kref);
+		get_device(clk->dev);
 		fp->private_data = clk;
 	}
 out:

@@ -154,7 +152,7 @@ static int posix_clock_release(struct in
 	if (clk->ops.release)
 		err = clk->ops.release(clk);
 
-	kref_put(&clk->kref, delete_clock);
+	put_device(clk->dev);
 
 	fp->private_data = NULL;

@@ -174,38 +172,35 @@ static const struct file_operations posi
 #endif
 };
 
-int posix_clock_register(struct posix_clock *clk, dev_t devid)
+int posix_clock_register(struct posix_clock *clk, struct device *dev)
 {
 	int err;
 
-	kref_init(&clk->kref);
 	init_rwsem(&clk->rwsem);
 
 	cdev_init(&clk->cdev, &posix_clock_file_operations);
+	err = cdev_device_add(&clk->cdev, dev);
+	if (err) {
+		pr_err("%s unable to add device %d:%d\n",
+			dev_name(dev), MAJOR(dev->devt), MINOR(dev->devt));
+		return err;
+	}
 	clk->cdev.owner = clk->ops.owner;
-	err = cdev_add(&clk->cdev, devid, 1);
+	clk->dev = dev;
 
-	return err;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(posix_clock_register);
 
-static void delete_clock(struct kref *kref)
-{
-	struct posix_clock *clk = container_of(kref, struct posix_clock, kref);
-
-	if (clk->release)
-		clk->release(clk);
-}
-
 void posix_clock_unregister(struct posix_clock *clk)
 {
-	cdev_del(&clk->cdev);
+	cdev_device_del(&clk->cdev, clk->dev);
 
 	down_write(&clk->rwsem);
 	clk->zombie = true;
 	up_write(&clk->rwsem);
 
-	kref_put(&clk->kref, delete_clock);
+	put_device(clk->dev);
 }
 EXPORT_SYMBOL_GPL(posix_clock_unregister);

Greg Kroah-Hartman

author maintainer

2020-01-02 22:49 UTC #77 lore raw

PATCH 77/91 udp: fix integer overflow while computing available space in sk_rcvbuf

From: Antonio Messina <[email protected]>

[ Upstream commit feed8a4fc9d46c3126fb9fcae0e9248270c6321a ]

When the size of the receive buffer for a socket is close to 2^31 when computing if we have enough space in the buffer to copy a packet from the queue to the buffer we might hit an integer overflow.

When an user set net.core.rmem_default to a value close to 2^31 UDP packets are dropped because of this overflow. This can be visible, for instance, with failure to resolve hostnames.

This can be fixed by casting sk_rcvbuf (which is an int) to unsigned int, similarly to how it is done in TCP.

Signed-off-by Antonio Messina <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/ipv4/udp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/ipv4/udp.c +1 -1

@@ -1338,7 +1338,7 @@ int __udp_enqueue_schedule_skb(struct so
 	 * queue contains some other skb
 	 */
 	rmem = atomic_add_return(size, &sk->sk_rmem_alloc);
-	if (rmem > (size + sk->sk_rcvbuf))
+	if (rmem > (size + (unsigned int)sk->sk_rcvbuf))
 		goto uncharge_drop;
 
 	spin_lock(&list->lock);

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #78 lore raw

PATCH 78/91 vhost/vsock: accept only packets with the right dst_cid

From: Stefano Garzarella <[email protected]>

[ Upstream commit 8a3cc29c316c17de590e3ff8b59f3d6cbfd37b0a ]

When we receive a new packet from the guest, we check if the src_cid is correct, but we forgot to check the dst_cid.

The host should accept only packets where dst_cid is equal to the host CID.

Signed-off-by Stefano Garzarella <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/vhost/vsock.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

drivers/vhost/vsock.c +3 -1

@@ -436,7 +436,9 @@ static void vhost_vsock_handle_tx_kick(s
 		virtio_transport_deliver_tap_pkt(pkt);
 
 		/* Only accept correctly addressed packets */
-		if (le64_to_cpu(pkt->hdr.src_cid) == vsock->guest_cid)
+		if (le64_to_cpu(pkt->hdr.src_cid) == vsock->guest_cid &&
+		    le64_to_cpu(pkt->hdr.dst_cid) ==
+		    vhost_transport_get_local_cid())
 			virtio_transport_recv_pkt(pkt);
 		else
 			virtio_transport_free_pkt(pkt);

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #79 lore raw

PATCH 79/91 net: add bool confirm_neigh parameter for dst_ops.update_pmtu

From: Hangbin Liu <[email protected]>

[ Upstream commit bd085ef678b2cc8c38c105673dfe8ff8f5ec0c57 ]

The MTU update code is supposed to be invoked in response to real networking events that update the PMTU. In IPv6 PMTU update function __ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor confirmed time.

But for tunnel code, it will call pmtu before xmit, like:
- tnl_update_pmtu()
- skb_dst_update_pmtu()
- ip6_rt_update_pmtu()
- __ip6_rt_update_pmtu()
- dst_confirm_neigh()

If the tunnel remote dst mac address changed and we still do the neigh confirm, we will not be able to update neigh cache and ping6 remote will failed.

So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we should not be invoking dst_confirm_neigh() as we have no evidence of successful two-way communication at this point.

On the other hand it is also important to keep the neigh reachability fresh for TCP flows, so we cannot remove this dst_confirm_neigh() call.

To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu to choose whether we should do neigh update or not. I will add the parameter in this patch and set all the callers to true to comply with the previous way, and fix the tunnel code one by one on later patches.

v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Signed-off-by Hangbin Liu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/gtp.c                |    2 +-
 include/net/dst.h                |    2 +-
 include/net/dst_ops.h            |    3 ++-
 net/bridge/br_nf_core.c          |    3 ++-
 net/decnet/dn_route.c            |    6 ++++--
 net/ipv4/inet_connection_sock.c  |    2 +-
 net/ipv4/route.c                 |    9 ++++++---
 net/ipv4/xfrm4_policy.c          |    5 +++--
 net/ipv6/inet6_connection_sock.c |    2 +-
 net/ipv6/ip6_gre.c               |    2 +-
 net/ipv6/route.c                 |   22 +++++++++++++++-------
 net/ipv6/xfrm6_policy.c          |    5 +++--
 net/netfilter/ipvs/ip_vs_xmit.c  |    2 +-
 net/sctp/transport.c             |    2 +-
 14 files changed, 42 insertions(+), 25 deletions(-)

drivers/net/gtp.c +1 -1

@@ -545,7 +545,7 @@ static int gtp_build_skb_ip4(struct sk_b
 		mtu = dst_mtu(&rt->dst);
 	}
 
-	rt->dst.ops->update_pmtu(&rt->dst, NULL, skb, mtu);
+	rt->dst.ops->update_pmtu(&rt->dst, NULL, skb, mtu, true);
 
 	if (!skb_is_gso(skb) && (iph->frag_off & htons(IP_DF)) &&
 	    mtu < ntohs(iph->tot_len)) {

include/net/dst.h +1 -1

@@ -528,7 +528,7 @@ static inline void skb_dst_update_pmtu(s
 	struct dst_entry *dst = skb_dst(skb);
 
 	if (dst && dst->ops->update_pmtu)
-		dst->ops->update_pmtu(dst, NULL, skb, mtu);
+		dst->ops->update_pmtu(dst, NULL, skb, mtu, true);
 }
 
 #endif /* _NET_DST_H */

include/net/dst_ops.h +2 -1

@@ -27,7 +27,8 @@ struct dst_ops {
 	struct dst_entry *	(*negative_advice)(struct dst_entry *);
 	void			(*link_failure)(struct sk_buff *);
 	void			(*update_pmtu)(struct dst_entry *dst, struct sock *sk,
-					       struct sk_buff *skb, u32 mtu);
+					       struct sk_buff *skb, u32 mtu,
+					       bool confirm_neigh);
 	void			(*redirect)(struct dst_entry *dst, struct sock *sk,
 					    struct sk_buff *skb);
 	int			(*local_out)(struct net *net, struct sock *sk, struct sk_buff *skb);

net/bridge/br_nf_core.c +2 -1

@@ -26,7 +26,8 @@
 #endif
 
 static void fake_update_pmtu(struct dst_entry *dst, struct sock *sk,
-			     struct sk_buff *skb, u32 mtu)
+			     struct sk_buff *skb, u32 mtu,
+			     bool confirm_neigh)
 {
 }

net/decnet/dn_route.c +4 -2

@@ -118,7 +118,8 @@ static void dn_dst_ifdown(struct dst_ent
 static struct dst_entry *dn_dst_negative_advice(struct dst_entry *);
 static void dn_dst_link_failure(struct sk_buff *);
 static void dn_dst_update_pmtu(struct dst_entry *dst, struct sock *sk,
-			       struct sk_buff *skb , u32 mtu);
+			       struct sk_buff *skb , u32 mtu,
+			       bool confirm_neigh);
 static void dn_dst_redirect(struct dst_entry *dst, struct sock *sk,
 			    struct sk_buff *skb);
 static struct neighbour *dn_dst_neigh_lookup(const struct dst_entry *dst,

@@ -259,7 +260,8 @@ static int dn_dst_gc(struct dst_ops *ops
  * advertise to the other end).
  */
 static void dn_dst_update_pmtu(struct dst_entry *dst, struct sock *sk,
-			       struct sk_buff *skb, u32 mtu)
+			       struct sk_buff *skb, u32 mtu,
+			       bool confirm_neigh)
 {
 	struct dn_route *rt = (struct dn_route *) dst;
 	struct neighbour *n = rt->n;

net/ipv4/inet_connection_sock.c +1 -1

@@ -1088,7 +1088,7 @@ struct dst_entry *inet_csk_update_pmtu(s
 		if (!dst)
 			goto out;
 	}
-	dst->ops->update_pmtu(dst, sk, NULL, mtu);
+	dst->ops->update_pmtu(dst, sk, NULL, mtu, true);
 
 	dst = __sk_dst_check(sk, 0);
 	if (!dst)

net/ipv4/route.c +6 -3

@@ -145,7 +145,8 @@ static unsigned int	 ipv4_mtu(const stru
 static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst);
 static void		 ipv4_link_failure(struct sk_buff *skb);
 static void		 ip_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
-					   struct sk_buff *skb, u32 mtu);
+					   struct sk_buff *skb, u32 mtu,
+					   bool confirm_neigh);
 static void		 ip_do_redirect(struct dst_entry *dst, struct sock *sk,
 					struct sk_buff *skb);
 static void		ipv4_dst_destroy(struct dst_entry *dst);

@@ -1042,7 +1043,8 @@ static void __ip_rt_update_pmtu(struct r
 }
 
 static void ip_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
-			      struct sk_buff *skb, u32 mtu)
+			      struct sk_buff *skb, u32 mtu,
+			      bool confirm_neigh)
 {
 	struct rtable *rt = (struct rtable *) dst;
 	struct flowi4 fl4;

@@ -2529,7 +2531,8 @@ static unsigned int ipv4_blackhole_mtu(c
 }
 
 static void ipv4_rt_blackhole_update_pmtu(struct dst_entry *dst, struct sock *sk,
-					  struct sk_buff *skb, u32 mtu)
+					  struct sk_buff *skb, u32 mtu,
+					  bool confirm_neigh)
 {
 }

net/ipv4/xfrm4_policy.c +3 -2

@@ -222,12 +222,13 @@ _decode_session4(struct sk_buff *skb, st
 }
 
 static void xfrm4_update_pmtu(struct dst_entry *dst, struct sock *sk,
-			      struct sk_buff *skb, u32 mtu)
+			      struct sk_buff *skb, u32 mtu,
+			      bool confirm_neigh)
 {
 	struct xfrm_dst *xdst = (struct xfrm_dst *)dst;
 	struct dst_entry *path = xdst->route;
 
-	path->ops->update_pmtu(path, sk, skb, mtu);
+	path->ops->update_pmtu(path, sk, skb, mtu, confirm_neigh);
 }
 
 static void xfrm4_redirect(struct dst_entry *dst, struct sock *sk,

net/ipv6/inet6_connection_sock.c +1 -1

@@ -150,7 +150,7 @@ struct dst_entry *inet6_csk_update_pmtu(
 
 	if (IS_ERR(dst))
 		return NULL;
-	dst->ops->update_pmtu(dst, sk, NULL, mtu);
+	dst->ops->update_pmtu(dst, sk, NULL, mtu, true);
 
 	dst = inet6_csk_route_socket(sk, &fl6);
 	return IS_ERR(dst) ? NULL : dst;

net/ipv6/ip6_gre.c +1 -1

@@ -527,7 +527,7 @@ static netdev_tx_t __gre6_xmit(struct sk
 
 	/* TooBig packet may have updated dst->dev's mtu */
 	if (dst && dst_mtu(dst) > dst->dev->mtu)
-		dst->ops->update_pmtu(dst, NULL, skb, dst->dev->mtu);
+		dst->ops->update_pmtu(dst, NULL, skb, dst->dev->mtu, true);
 
 	return ip6_tnl_xmit(skb, dev, dsfield, fl6, encap_limit, pmtu,
 			    NEXTHDR_GRE);

net/ipv6/route.c +15 -7

@@ -93,7 +93,8 @@ static int		ip6_pkt_prohibit(struct sk_b
 static int		ip6_pkt_prohibit_out(struct net *net, struct sock *sk, struct sk_buff *skb);
 static void		ip6_link_failure(struct sk_buff *skb);
 static void		ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
-					   struct sk_buff *skb, u32 mtu);
+					   struct sk_buff *skb, u32 mtu,
+					   bool confirm_neigh);
 static void		rt6_do_redirect(struct dst_entry *dst, struct sock *sk,
 					struct sk_buff *skb);
 static void		rt6_dst_from_metrics_check(struct rt6_info *rt);

@@ -264,7 +265,8 @@ static unsigned int ip6_blackhole_mtu(co
 }
 
 static void ip6_rt_blackhole_update_pmtu(struct dst_entry *dst, struct sock *sk,
-					 struct sk_buff *skb, u32 mtu)
+					 struct sk_buff *skb, u32 mtu,
+					 bool confirm_neigh)
 {
 }

@@ -1471,7 +1473,8 @@ static bool rt6_cache_allowed_for_pmtu(c
 }
 
 static void __ip6_rt_update_pmtu(struct dst_entry *dst, const struct sock *sk,
-				 const struct ipv6hdr *iph, u32 mtu)
+				 const struct ipv6hdr *iph, u32 mtu,
+				 bool confirm_neigh)
 {
 	const struct in6_addr *daddr, *saddr;
 	struct rt6_info *rt6 = (struct rt6_info *)dst;

@@ -1489,7 +1492,10 @@ static void __ip6_rt_update_pmtu(struct
 		daddr = NULL;
 		saddr = NULL;
 	}
-	dst_confirm_neigh(dst, daddr);
+
+	if (confirm_neigh)
+		dst_confirm_neigh(dst, daddr);
+
 	mtu = max_t(u32, mtu, IPV6_MIN_MTU);
 	if (mtu >= dst_mtu(dst))
 		return;

@@ -1518,9 +1524,11 @@ static void __ip6_rt_update_pmtu(struct
 }
 
 static void ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
-			       struct sk_buff *skb, u32 mtu)
+			       struct sk_buff *skb, u32 mtu,
+			       bool confirm_neigh)
 {
-	__ip6_rt_update_pmtu(dst, sk, skb ? ipv6_hdr(skb) : NULL, mtu);
+	__ip6_rt_update_pmtu(dst, sk, skb ? ipv6_hdr(skb) : NULL, mtu,
+			     confirm_neigh);
 }
 
 void ip6_update_pmtu(struct sk_buff *skb, struct net *net, __be32 mtu,

@@ -1540,7 +1548,7 @@ void ip6_update_pmtu(struct sk_buff *skb
 
 	dst = ip6_route_output(net, NULL, &fl6);
 	if (!dst->error)
-		__ip6_rt_update_pmtu(dst, NULL, iph, ntohl(mtu));
+		__ip6_rt_update_pmtu(dst, NULL, iph, ntohl(mtu), true);
 	dst_release(dst);
 }
 EXPORT_SYMBOL_GPL(ip6_update_pmtu);

net/ipv6/xfrm6_policy.c +3 -2

@@ -219,12 +219,13 @@ _decode_session6(struct sk_buff *skb, st
 }
 
 static void xfrm6_update_pmtu(struct dst_entry *dst, struct sock *sk,
-			      struct sk_buff *skb, u32 mtu)
+			      struct sk_buff *skb, u32 mtu,
+			      bool confirm_neigh)
 {
 	struct xfrm_dst *xdst = (struct xfrm_dst *)dst;
 	struct dst_entry *path = xdst->route;
 
-	path->ops->update_pmtu(path, sk, skb, mtu);
+	path->ops->update_pmtu(path, sk, skb, mtu, confirm_neigh);
 }
 
 static void xfrm6_redirect(struct dst_entry *dst, struct sock *sk,

net/netfilter/ipvs/ip_vs_xmit.c +1 -1

@@ -209,7 +209,7 @@ static inline void maybe_update_pmtu(int
 	struct rtable *ort = skb_rtable(skb);
 
 	if (!skb->dev && sk && sk_fullsock(sk))
-		ort->dst.ops->update_pmtu(&ort->dst, sk, NULL, mtu);
+		ort->dst.ops->update_pmtu(&ort->dst, sk, NULL, mtu, true);
 }
 
 static inline bool ensure_mtu_is_adequate(struct netns_ipvs *ipvs, int skb_af,

net/sctp/transport.c +1 -1

@@ -272,7 +272,7 @@ bool sctp_transport_update_pmtu(struct s
 
 		pf->af->from_sk(&addr, sk);
 		pf->to_sk_daddr(&t->ipaddr, sk);
-		dst->ops->update_pmtu(dst, sk, NULL, pmtu);
+		dst->ops->update_pmtu(dst, sk, NULL, pmtu, true);
 		pf->to_sk_daddr(&addr, sk);
 
 		dst = sctp_transport_dst_check(t);

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #80 lore raw

PATCH 80/91 ip6_gre: do not confirm neighbor when do pmtu update

From: Hangbin Liu <[email protected]>

[ Upstream commit 675d76ad0ad5bf41c9a129772ef0aba8f57ea9a7 ]

When we do ipv6 gre pmtu update, we will also do neigh confirm currently. This will cause the neigh cache be refreshed and set to REACHABLE before xmit.

But if the remote mac address changed, e.g. device is deleted and recreated, we will not able to notice this and still use the old mac address as the neigh cache is REACHABLE.

Fix this by disable neigh confirm when do pmtu update

Reported-by Jianlin Shi <[email protected]>

Signed-off-by Hangbin Liu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/ipv6/ip6_gre.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/ipv6/ip6_gre.c +1 -1

@@ -527,7 +527,7 @@ static netdev_tx_t __gre6_xmit(struct sk
 
 	/* TooBig packet may have updated dst->dev's mtu */
 	if (dst && dst_mtu(dst) > dst->dev->mtu)
-		dst->ops->update_pmtu(dst, NULL, skb, dst->dev->mtu, true);
+		dst->ops->update_pmtu(dst, NULL, skb, dst->dev->mtu, false);
 
 	return ip6_tnl_xmit(skb, dev, dsfield, fl6, encap_limit, pmtu,
 			    NEXTHDR_GRE);

Greg Kroah-Hartman

author maintainer

2020-01-02 22:49 UTC #81 lore raw

PATCH 81/91 gtp: do not confirm neighbor when do pmtu update

From: Hangbin Liu <[email protected]>

[ Upstream commit 6e9105c73f8d2163d12d5dfd762fd75483ed30f5 ]

When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication.

Although GTP only support ipv4 right now, and __ip_rt_update_pmtu() does not call dst_confirm_neigh(), we still set it to false to keep consistency with IPv6 code.

Signed-off-by Hangbin Liu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/gtp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/gtp.c +1 -1

index 9e3963f46458..d957ffdfec0f 100644
@@ -545,7 +545,7 @@ static int gtp_build_skb_ip4(struct sk_buff *skb, struct net_device *dev,
 		mtu = dst_mtu(&rt->dst);
 	}
 
-	rt->dst.ops->update_pmtu(&rt->dst, NULL, skb, mtu, true);
+	rt->dst.ops->update_pmtu(&rt->dst, NULL, skb, mtu, false);
 
 	if (!skb_is_gso(skb) && (iph->frag_off & htons(IP_DF)) &&
 	    mtu < ntohs(iph->tot_len)) {

Signature · 1 line

2.20.1

Greg Kroah-Hartman

author maintainer

2020-01-02 22:49 UTC #82 lore raw

PATCH 82/91 net/dst: add new function skb_dst_update_pmtu_no_confirm

From: Hangbin Liu <[email protected]>

[ Upstream commit 07dc35c6e3cc3c001915d05f5bf21f80a39a0970 ]

Add a new function skb_dst_update_pmtu_no_confirm() for callers who need update pmtu but should not do neighbor confirm.

Signed-off-by Hangbin Liu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 include/net/dst.h |    9 +++++++++
 1 file changed, 9 insertions(+)

include/net/dst.h +9 -0

@@ -531,4 +531,13 @@ static inline void skb_dst_update_pmtu(s
 		dst->ops->update_pmtu(dst, NULL, skb, mtu, true);
 }
 
+/* update dst pmtu but not do neighbor confirm */
+static inline void skb_dst_update_pmtu_no_confirm(struct sk_buff *skb, u32 mtu)
+{
+	struct dst_entry *dst = skb_dst(skb);
+
+	if (dst && dst->ops->update_pmtu)
+		dst->ops->update_pmtu(dst, NULL, skb, mtu, false);
+}
+
 #endif /* _NET_DST_H */

Greg Kroah-Hartman

author maintainer

2020-01-02 22:49 UTC #83 lore raw

PATCH 83/91 tunnel: do not confirm neighbor when do pmtu update

From: Hangbin Liu <[email protected]>

[ Upstream commit 7a1592bcb15d71400a98632727791d1e68ea0ee8 ]

When do tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication.

v5: No Change.
v4: Update commit description
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Fixes 0dec879f636f ("net: use dst_confirm_neigh for UDP, RAW, ICMP, L2TP")

Tested-by Guillaume Nault <[email protected]>

Signed-off-by Hangbin Liu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/ipv4/ip_tunnel.c  |    2 +-
 net/ipv6/ip6_tunnel.c |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

net/ipv4/ip_tunnel.c +1 -1

@@ -521,7 +521,7 @@ static int tnl_update_pmtu(struct net_de
 	else
 		mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
 
-	skb_dst_update_pmtu(skb, mtu);
+	skb_dst_update_pmtu_no_confirm(skb, mtu);
 
 	if (skb->protocol == htons(ETH_P_IP)) {
 		if (!skb_is_gso(skb) &&

net/ipv6/ip6_tunnel.c +2 -2

@@ -652,7 +652,7 @@ ip4ip6_err(struct sk_buff *skb, struct i
 		if (rel_info > dst_mtu(skb_dst(skb2)))
 			goto out;
 
-		skb_dst_update_pmtu(skb2, rel_info);
+		skb_dst_update_pmtu_no_confirm(skb2, rel_info);
 	}
 	if (rel_type == ICMP_REDIRECT)
 		skb_dst(skb2)->ops->redirect(skb_dst(skb2), NULL, skb2);

@@ -1138,7 +1138,7 @@ route_lookup:
 	mtu = max(mtu, skb->protocol == htons(ETH_P_IPV6) ?
 		       IPV6_MIN_MTU : IPV4_MIN_MTU);
 
-	skb_dst_update_pmtu(skb, mtu);
+	skb_dst_update_pmtu_no_confirm(skb, mtu);
 	if (skb->len - t->tun_hlen - eth_hlen > mtu && !skb_is_gso(skb)) {
 		*pmtu = mtu;
 		err = -EMSGSIZE;

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #84 lore raw

PATCH 84/91 vti: do not confirm neighbor when do pmtu update

From: Hangbin Liu <[email protected]>

[ Upstream commit 8247a79efa2f28b44329f363272550c1738377de ]

When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication.

Although vti and vti6 are immune to this problem because they are IFF_NOARP interfaces, as Guillaume pointed. There is still no sense to confirm neighbour here.

v5: Update commit description.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.

Signed-off-by Hangbin Liu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/ipv4/ip_vti.c  |    2 +-
 net/ipv6/ip6_vti.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

net/ipv4/ip_vti.c +1 -1

@@ -244,7 +244,7 @@ static netdev_tx_t vti_xmit(struct sk_bu
 
 	mtu = dst_mtu(dst);
 	if (skb->len > mtu) {
-		skb_dst_update_pmtu(skb, mtu);
+		skb_dst_update_pmtu_no_confirm(skb, mtu);
 		if (skb->protocol == htons(ETH_P_IP)) {
 			icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
 				  htonl(mtu));

net/ipv6/ip6_vti.c +1 -1

@@ -483,7 +483,7 @@ vti6_xmit(struct sk_buff *skb, struct ne
 
 	mtu = dst_mtu(dst);
 	if (skb->len > mtu) {
-		skb_dst_update_pmtu(skb, mtu);
+		skb_dst_update_pmtu_no_confirm(skb, mtu);
 
 		if (skb->protocol == htons(ETH_P_IPV6)) {
 			if (mtu < IPV6_MIN_MTU)

Greg Kroah-Hartman

author maintainer

2020-01-02 22:49 UTC #85 lore raw

PATCH 85/91 sit: do not confirm neighbor when do pmtu update

From: Hangbin Liu <[email protected]>

[ Upstream commit 4d42df46d6372ece4cb4279870b46c2ea7304a47 ]

When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication.

Signed-off-by Hangbin Liu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/ipv6/sit.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/ipv6/sit.c +1 -1

@@ -932,7 +932,7 @@ static netdev_tx_t ipip6_tunnel_xmit(str
 		}
 
 		if (tunnel->parms.iph.daddr)
-			skb_dst_update_pmtu(skb, mtu);
+			skb_dst_update_pmtu_no_confirm(skb, mtu);
 
 		if (skb->len > mtu && !skb_is_gso(skb)) {
 			icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);

Greg Kroah-Hartman

author maintainer

2020-01-02 22:26 UTC #86 lore raw

PATCH 86/91 gtp: do not allow adding duplicate tid and ms_addr pdp context

From: Taehee Yoo <[email protected]>

[ Upstream commit 6b01b1d9b2d38dc84ac398bfe9f00baff06a31e5 ]

GTP RX packet path lookups pdp context with TID. If duplicate TID pdp contexts are existing in the list, it couldn't select correct pdp context. So, TID value should be unique.
GTP TX packet path lookups pdp context with ms_addr. If duplicate ms_addr pdp contexts are existing in the list, it couldn't select correct pdp context. So, ms_addr value should be unique.

Fixes 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")

Signed-off-by Taehee Yoo <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/gtp.c |   32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

drivers/net/gtp.c +22 ~~-10~~

@@ -929,24 +929,31 @@ static void ipv4_pdp_fill(struct pdp_ctx
 	}
 }
 
-static int ipv4_pdp_add(struct gtp_dev *gtp, struct sock *sk,
-			struct genl_info *info)
+static int gtp_pdp_add(struct gtp_dev *gtp, struct sock *sk,
+		       struct genl_info *info)
 {
+	struct pdp_ctx *pctx, *pctx_tid = NULL;
 	struct net_device *dev = gtp->dev;
 	u32 hash_ms, hash_tid = 0;
-	struct pdp_ctx *pctx;
+	unsigned int version;
 	bool found = false;
 	__be32 ms_addr;
 
 	ms_addr = nla_get_be32(info->attrs[GTPA_MS_ADDRESS]);
 	hash_ms = ipv4_hashfn(ms_addr) % gtp->hash_size;
+	version = nla_get_u32(info->attrs[GTPA_VERSION]);
 
-	hlist_for_each_entry_rcu(pctx, &gtp->addr_hash[hash_ms], hlist_addr) {
-		if (pctx->ms_addr_ip4.s_addr == ms_addr) {
-			found = true;
-			break;
-		}
-	}
+	pctx = ipv4_pdp_find(gtp, ms_addr);
+	if (pctx)
+		found = true;
+	if (version == GTP_V0)
+		pctx_tid = gtp0_pdp_find(gtp,
+					 nla_get_u64(info->attrs[GTPA_TID]));
+	else if (version == GTP_V1)
+		pctx_tid = gtp1_pdp_find(gtp,
+					 nla_get_u32(info->attrs[GTPA_I_TEI]));
+	if (pctx_tid)
+		found = true;
 
 	if (found) {
 		if (info->nlhdr->nlmsg_flags & NLM_F_EXCL)

@@ -954,6 +961,11 @@ static int ipv4_pdp_add(struct gtp_dev *
 		if (info->nlhdr->nlmsg_flags & NLM_F_REPLACE)
 			return -EOPNOTSUPP;
 
+		if (pctx && pctx_tid)
+			return -EEXIST;
+		if (!pctx)
+			pctx = pctx_tid;
+
 		ipv4_pdp_fill(pctx, info);
 
 		if (pctx->gtp_version == GTP_V0)

@@ -1077,7 +1089,7 @@ static int gtp_genl_new_pdp(struct sk_bu
 		goto out_unlock;
 	}
 
-	err = ipv4_pdp_add(gtp, sk, info);
+	err = gtp_pdp_add(gtp, sk, info);
 
 out_unlock:
 	rcu_read_unlock();

Greg Kroah-Hartman

author maintainer

2020-01-02 22:27 UTC #87 lore raw

PATCH 87/91 tcp/dccp: fix possible race __inet_lookup_established()

From: Eric Dumazet <[email protected]>

commit 8dbd76e79a16b45b2ccb01d2f2e08dbf64e71e40 upstream.

Michal Kubecek and Firo Yang did a very nice analysis of crashes happening in __inet_lookup_established().

Since a TCP socket can go from TCP_ESTABLISH to TCP_LISTEN (via a close()/socket()/listen() cycle) without a RCU grace period, I should not have changed listeners linkage in their hash table.

They must use the nulls protocol (Documentation/RCU/rculist_nulls.txt), so that a lookup can detect a socket in a hash list was moved in another one.

Since we added code in commit d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix"), we have to add hlist_nulls_add_tail_rcu() helper.

Fixes 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood")

Link https://lore.kernel.org/netdev/[email protected]/ open here

Reported-by Michal Kubecek <[email protected]>

Reported-by Firo Yang <[email protected]>

Reviewed-by Michal Kubecek <[email protected]>

[stable-4.14: we also need to update code in __inet_lookup_listener() and
inet6_lookup_listener() which has been removed in 5.0-rc1.]

Signed-off-by Michal Kubecek <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 include/linux/rculist_nulls.h |   37 +++++++++++++++++++++++++++++++++++++
 include/net/inet_hashtables.h |   12 +++++++++---
 include/net/sock.h            |    5 +++++
 net/ipv4/inet_diag.c          |    3 ++-
 net/ipv4/inet_hashtables.c    |   18 +++++++++---------
 net/ipv4/tcp_ipv4.c           |    7 ++++---
 net/ipv6/inet6_hashtables.c   |    3 ++-
 7 files changed, 68 insertions(+), 17 deletions(-)

include/linux/rculist_nulls.h +37 -0

@@ -101,6 +101,43 @@ static inline void hlist_nulls_add_head_
 }
 
 /**
+ * hlist_nulls_add_tail_rcu
+ * @n: the element to add to the hash list.
+ * @h: the list to add to.
+ *
+ * Description:
+ * Adds the specified element to the specified hlist_nulls,
+ * while permitting racing traversals.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_nulls_add_head_rcu()
+ * or hlist_nulls_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_nulls_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs.  Regardless of the type of CPU, the
+ * list-traversal primitive must be guarded by rcu_read_lock().
+ */
+static inline void hlist_nulls_add_tail_rcu(struct hlist_nulls_node *n,
+					    struct hlist_nulls_head *h)
+{
+	struct hlist_nulls_node *i, *last = NULL;
+
+	/* Note: write side code, so rcu accessors are not needed. */
+	for (i = h->first; !is_a_nulls(i); i = i->next)
+		last = i;
+
+	if (last) {
+		n->next = last->next;
+		n->pprev = &last->next;
+		rcu_assign_pointer(hlist_next_rcu(last), n);
+	} else {
+		hlist_nulls_add_head_rcu(n, h);
+	}
+}
+
+/**
  * hlist_nulls_for_each_entry_rcu - iterate over rcu list of given type
  * @tpos:	the type * to use as a loop cursor.
  * @pos:	the &struct hlist_nulls_node to use as a loop cursor.

include/net/inet_hashtables.h +9 -3

@@ -106,12 +106,18 @@ struct inet_bind_hashbucket {
 	struct hlist_head	chain;
 };
 
-/*
- * Sockets can be hashed in established or listening table
+/* Sockets can be hashed in established or listening table.
+ * We must use different 'nulls' end-of-chain value for all hash buckets :
+ * A socket might transition from ESTABLISH to LISTEN state without
+ * RCU grace period. A lookup in ehash table needs to handle this case.
  */
+#define LISTENING_NULLS_BASE (1U << 29)
 struct inet_listen_hashbucket {
 	spinlock_t		lock;
-	struct hlist_head	head;
+	union {
+		struct hlist_head	head;
+		struct hlist_nulls_head	nulls_head;
+	};
 };
 
 /* This is for listening sockets, thus all sockets which possess wildcards. */

include/net/sock.h +5 -0

@@ -693,6 +693,11 @@ static inline void __sk_nulls_add_node_r
 	hlist_nulls_add_head_rcu(&sk->sk_nulls_node, list);
 }
 
+static inline void __sk_nulls_add_node_tail_rcu(struct sock *sk, struct hlist_nulls_head *list)
+{
+	hlist_nulls_add_tail_rcu(&sk->sk_nulls_node, list);
+}
+
 static inline void sk_nulls_add_node_rcu(struct sock *sk, struct hlist_nulls_head *list)
 {
 	sock_hold(sk);

net/ipv4/inet_diag.c +2 -1

@@ -911,11 +911,12 @@ void inet_diag_dump_icsk(struct inet_has
 
 		for (i = s_i; i < INET_LHTABLE_SIZE; i++) {
 			struct inet_listen_hashbucket *ilb;
+			struct hlist_nulls_node *node;
 
 			num = 0;
 			ilb = &hashinfo->listening_hash[i];
 			spin_lock(&ilb->lock);
-			sk_for_each(sk, &ilb->head) {
+			sk_nulls_for_each(sk, node, &ilb->nulls_head) {
 				struct inet_sock *inet = inet_sk(sk);
 
 				if (!net_eq(sock_net(sk), net))

net/ipv4/inet_hashtables.c +9 -9

@@ -219,9 +219,10 @@ struct sock *__inet_lookup_listener(stru
 	int score, hiscore = 0, matches = 0, reuseport = 0;
 	bool exact_dif = inet_exact_dif_match(net, skb);
 	struct sock *sk, *result = NULL;
+	struct hlist_nulls_node *node;
 	u32 phash = 0;
 
-	sk_for_each_rcu(sk, &ilb->head) {
+	sk_nulls_for_each_rcu(sk, node, &ilb->nulls_head) {
 		score = compute_score(sk, net, hnum, daddr,
 				      dif, sdif, exact_dif);
 		if (score > hiscore) {

@@ -442,10 +443,11 @@ static int inet_reuseport_add_sock(struc
 				   struct inet_listen_hashbucket *ilb)
 {
 	struct inet_bind_bucket *tb = inet_csk(sk)->icsk_bind_hash;
+	const struct hlist_nulls_node *node;
 	struct sock *sk2;
 	kuid_t uid = sock_i_uid(sk);
 
-	sk_for_each_rcu(sk2, &ilb->head) {
+	sk_nulls_for_each_rcu(sk2, node, &ilb->nulls_head) {
 		if (sk2 != sk &&
 		    sk2->sk_family == sk->sk_family &&
 		    ipv6_only_sock(sk2) == ipv6_only_sock(sk) &&

@@ -480,9 +482,9 @@ int __inet_hash(struct sock *sk, struct
 	}
 	if (IS_ENABLED(CONFIG_IPV6) && sk->sk_reuseport &&
 		sk->sk_family == AF_INET6)
-		hlist_add_tail_rcu(&sk->sk_node, &ilb->head);
+		__sk_nulls_add_node_tail_rcu(sk, &ilb->nulls_head);
 	else
-		hlist_add_head_rcu(&sk->sk_node, &ilb->head);
+		__sk_nulls_add_node_rcu(sk, &ilb->nulls_head);
 	sock_set_flag(sk, SOCK_RCU_FREE);
 	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
 unlock:

@@ -525,10 +527,7 @@ void inet_unhash(struct sock *sk)
 	spin_lock_bh(lock);
 	if (rcu_access_pointer(sk->sk_reuseport_cb))
 		reuseport_detach_sock(sk);
-	if (listener)
-		done = __sk_del_node_init(sk);
-	else
-		done = __sk_nulls_del_node_init_rcu(sk);
+	done = __sk_nulls_del_node_init_rcu(sk);
 	if (done)
 		sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
 	spin_unlock_bh(lock);

@@ -664,7 +663,8 @@ void inet_hashinfo_init(struct inet_hash
 
 	for (i = 0; i < INET_LHTABLE_SIZE; i++) {
 		spin_lock_init(&h->listening_hash[i].lock);
-		INIT_HLIST_HEAD(&h->listening_hash[i].head);
+		INIT_HLIST_NULLS_HEAD(&h->listening_hash[i].nulls_head,
+				      i + LISTENING_NULLS_BASE);
 	}
 }
 EXPORT_SYMBOL_GPL(inet_hashinfo_init);

net/ipv4/tcp_ipv4.c +4 -3

@@ -1936,13 +1936,14 @@ static void *listening_get_next(struct s
 	struct tcp_iter_state *st = seq->private;
 	struct net *net = seq_file_net(seq);
 	struct inet_listen_hashbucket *ilb;
+	struct hlist_nulls_node *node;
 	struct sock *sk = cur;
 
 	if (!sk) {
 get_head:
 		ilb = &tcp_hashinfo.listening_hash[st->bucket];
 		spin_lock(&ilb->lock);
-		sk = sk_head(&ilb->head);
+		sk = sk_nulls_head(&ilb->nulls_head);
 		st->offset = 0;
 		goto get_sk;
 	}

@@ -1950,9 +1951,9 @@ get_head:
 	++st->num;
 	++st->offset;
 
-	sk = sk_next(sk);
+	sk = sk_nulls_next(sk);
 get_sk:
-	sk_for_each_from(sk) {
+	sk_nulls_for_each_from(sk, node) {
 		if (!net_eq(sock_net(sk), net))
 			continue;
 		if (sk->sk_family == st->family)

net/ipv6/inet6_hashtables.c +2 -1

@@ -137,9 +137,10 @@ struct sock *inet6_lookup_listener(struc
 	int score, hiscore = 0, matches = 0, reuseport = 0;
 	bool exact_dif = inet6_exact_dif_match(net, skb);
 	struct sock *sk, *result = NULL;
+	struct hlist_nulls_node *node;
 	u32 phash = 0;
 
-	sk_for_each(sk, &ilb->head) {
+	sk_nulls_for_each(sk, node, &ilb->nulls_head) {
 		score = compute_score(sk, net, hnum, daddr, dif, sdif, exact_dif);
 		if (score > hiscore) {
 			reuseport = sk->sk_reuseport;

Greg Kroah-Hartman

author maintainer

2020-01-02 22:27 UTC #88 lore raw

PATCH 88/91 tcp: do not send empty skb from tcp_write_xmit()

From: Eric Dumazet <[email protected]>

[ Upstream commit 1f85e6267caca44b30c54711652b0726fadbb131 ]

Backport of commit fdfc5c8594c2 ("tcp: remove empty skb from write queue in error cases") in linux-4.14 stable triggered various bugs. One of them has been fixed in commit ba2ddb43f270 ("tcp: Don't dequeue SYN/FIN-segments from write-queue"), but we still have crashes in some occasions.

Root-cause is that when tcp_sendmsg() has allocated a fresh skb and could not append a fragment before being blocked in sk_stream_wait_memory(), tcp_write_xmit() might be called and decide to send this fresh and empty skb.

Sending an empty packet is not only silly, it might have caused many issues we had in the past with tp->packets_out being out of sync.

Fixes c65f7f00c587 ("[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.")

Cc Christoph Paasch <[email protected]>

Acked-by Neal Cardwell <[email protected]>

Cc Jason Baron <[email protected]>

Acked-by Soheil Hassas Yeganeh <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/ipv4/tcp_output.c |    8 ++++++++
 1 file changed, 8 insertions(+)

net/ipv4/tcp_output.c +8 -0

@@ -2380,6 +2380,14 @@ static bool tcp_write_xmit(struct sock *
 		if (tcp_small_queue_check(sk, skb, 0))
 			break;
 
+		/* Argh, we hit an empty skb(), presumably a thread
+		 * is sleeping in sendmsg()/sk_stream_wait_memory().
+		 * We do not want to send a pure-ack packet and have
+		 * a strange looking rtx queue with empty packet(s).
+		 */
+		if (TCP_SKB_CB(skb)->end_seq == TCP_SKB_CB(skb)->seq)
+			break;
+
 		if (unlikely(tcp_transmit_skb(sk, skb, 1, gfp)))
 			break;

Greg Kroah-Hartman

author maintainer

2020-01-02 22:49 UTC #89 lore raw

PATCH 89/91 gtp: fix wrong condition in gtp_genl_dump_pdp()

From: Taehee Yoo <[email protected]>

[ Upstream commit 94a6d9fb88df43f92d943c32b84ce398d50bf49f ]

gtp_genl_dump_pdp() is ->dumpit() callback of GTP module and it is used to dump pdp contexts. it would be re-executed because of dump packet size.

If dump packet size is too big, it saves current dump pointer (gtp interface pointer, bucket, TID value) then it restarts dump from last pointer.
Current GTP code allows adding zero TID pdp context but dump code ignores zero TID value. So, last dump pointer will not be found.

In addition, this patch adds missing rcu_read_lock() in gtp_genl_dump_pdp().

Fixes 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")

Signed-off-by Taehee Yoo <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/gtp.c |   36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)

drivers/net/gtp.c +19 ~~-17~~

@@ -42,7 +42,6 @@ struct pdp_ctx {
 	struct hlist_node	hlist_addr;
 
 	union {
-		u64		tid;
 		struct {
 			u64	tid;
 			u16	flow;

@@ -1247,43 +1246,46 @@ static int gtp_genl_dump_pdp(struct sk_b
 				struct netlink_callback *cb)
 {
 	struct gtp_dev *last_gtp = (struct gtp_dev *)cb->args[2], *gtp;
+	int i, j, bucket = cb->args[0], skip = cb->args[1];
 	struct net *net = sock_net(skb->sk);
-	struct gtp_net *gn = net_generic(net, gtp_net_id);
-	unsigned long tid = cb->args[1];
-	int i, k = cb->args[0], ret;
 	struct pdp_ctx *pctx;
+	struct gtp_net *gn;
+
+	gn = net_generic(net, gtp_net_id);
 
 	if (cb->args[4])
 		return 0;
 
+	rcu_read_lock();
 	list_for_each_entry_rcu(gtp, &gn->gtp_dev_list, list) {
 		if (last_gtp && last_gtp != gtp)
 			continue;
 		else
 			last_gtp = NULL;
 
-		for (i = k; i < gtp->hash_size; i++) {
-			hlist_for_each_entry_rcu(pctx, &gtp->tid_hash[i], hlist_tid) {
-				if (tid && tid != pctx->u.tid)
-					continue;
-				else
-					tid = 0;
-
-				ret = gtp_genl_fill_info(skb,
-							 NETLINK_CB(cb->skb).portid,
-							 cb->nlh->nlmsg_seq,
-							 cb->nlh->nlmsg_type, pctx);
-				if (ret < 0) {
+		for (i = bucket; i < gtp->hash_size; i++) {
+			j = 0;
+			hlist_for_each_entry_rcu(pctx, &gtp->tid_hash[i],
+						 hlist_tid) {
+				if (j >= skip &&
+				    gtp_genl_fill_info(skb,
+					    NETLINK_CB(cb->skb).portid,
+					    cb->nlh->nlmsg_seq,
+					    cb->nlh->nlmsg_type, pctx)) {
 					cb->args[0] = i;
-					cb->args[1] = pctx->u.tid;
+					cb->args[1] = j;
 					cb->args[2] = (unsigned long)gtp;
 					goto out;
 				}
+				j++;
 			}
+			skip = 0;
 		}
+		bucket = 0;
 	}
 	cb->args[4] = 1;
 out:
+	rcu_read_unlock();
 	return skb->len;
 }

Greg Kroah-Hartman

author maintainer

2020-01-02 22:27 UTC #90 lore raw

PATCH 90/91 gtp: fix an use-after-free in ipv4_pdp_find()

From: Taehee Yoo <[email protected]>

[ Upstream commit 94dc550a5062030569d4aa76e10e50c8fc001930 ]

ipv4_pdp_find() is called in TX packet path of GTP. ipv4_pdp_find() internally uses gtp->tid_hash to lookup pdp context. In the current code, gtp->tid_hash and gtp->addr_hash are freed by ->dellink(), which is gtp_dellink().
But gtp_dellink() would be called while packets are processing. So, gtp_dellink() should not free gtp->tid_hash and gtp->addr_hash. Instead, dev->priv_destructor() would be used because this callback is called after all packet processing safely.

Test commands:
ip link add veth1 type veth peer name veth2
ip a a 172.0.0.1/24 dev veth1
ip link set veth1 up
ip a a 172.99.0.1/32 dev lo

gtp-link add gtp1 &

gtp-tunnel add gtp1 v1 200 100 172.99.0.2 172.0.0.2 ip r a 172.99.0.2/32 dev gtp1
ip link set gtp1 mtu 1500

ip netns add ns2
ip link set veth2 netns ns2
ip netns exec ns2 ip a a 172.0.0.2/24 dev veth2 ip netns exec ns2 ip link set veth2 up ip netns exec ns2 ip a a 172.99.0.2/32 dev lo ip netns exec ns2 ip link set lo up

ip netns exec ns2 gtp-link add gtp2 &
ip netns exec ns2 gtp-tunnel add gtp2 v1 100 200 172.99.0.1 172.0.0.1 ip netns exec ns2 ip r a 172.99.0.1/32 dev gtp2
ip netns exec ns2 ip link set gtp2 mtu 1500

hping3 172.99.0.2 -2 --flood &
ip link del gtp1

Splat looks like:

[   72.568081][ T1195] BUG: KASAN: use-after-free in ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.568916][ T1195] Read of size 8 at addr ffff8880b9a35d28 by task hping3/1195
[   72.569631][ T1195]
[   72.569861][ T1195] CPU: 2 PID: 1195 Comm: hping3 Not tainted 5.5.0-rc1 #199
[   72.570547][ T1195] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   72.571438][ T1195] Call Trace:
[   72.571764][ T1195]  dump_stack+0x96/0xdb
[   72.572171][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.572761][ T1195]  print_address_description.constprop.5+0x1be/0x360
[   72.573400][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.573971][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.574544][ T1195]  __kasan_report+0x12a/0x16f
[   72.575014][ T1195]  ? ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.575593][ T1195]  kasan_report+0xe/0x20
[   72.576004][ T1195]  ipv4_pdp_find.isra.12+0x130/0x170 [gtp]
[   72.576577][ T1195]  gtp_build_skb_ip4+0x199/0x1420 [gtp]
[ ... ]
[   72.647671][ T1195] BUG: unable to handle page fault for address: ffff8880b9a35d28
[   72.648512][ T1195] #PF: supervisor read access in kernel mode
[   72.649158][ T1195] #PF: error_code(0x0000) - not-present page
[   72.649849][ T1195] PGD a6c01067 P4D a6c01067 PUD 11fb07067 PMD 11f939067 PTE 800fffff465ca060
[   72.652958][ T1195] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[   72.653834][ T1195] CPU: 2 PID: 1195 Comm: hping3 Tainted: G    B             5.5.0-rc1 #199
[   72.668062][ T1195] RIP: 0010:ipv4_pdp_find.isra.12+0x86/0x170 [gtp]
[ ... ]
[   72.679168][ T1195] Call Trace:
[   72.679603][ T1195]  gtp_build_skb_ip4+0x199/0x1420 [gtp]
[   72.681915][ T1195]  ? ipv4_pdp_find.isra.12+0x170/0x170 [gtp]
[   72.682513][ T1195]  ? lock_acquire+0x164/0x3b0
[   72.682966][ T1195]  ? gtp_dev_xmit+0x35e/0x890 [gtp]
[   72.683481][ T1195]  gtp_dev_xmit+0x3c2/0x890 [gtp]

[ ... ]

Fixes 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")

Signed-off-by Taehee Yoo <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/gtp.c |   34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

drivers/net/gtp.c +17 ~~-17~~

@@ -644,9 +644,16 @@ static void gtp_link_setup(struct net_de
 }
 
 static int gtp_hashtable_new(struct gtp_dev *gtp, int hsize);
-static void gtp_hashtable_free(struct gtp_dev *gtp);
 static int gtp_encap_enable(struct gtp_dev *gtp, struct nlattr *data[]);
 
+static void gtp_destructor(struct net_device *dev)
+{
+	struct gtp_dev *gtp = netdev_priv(dev);
+
+	kfree(gtp->addr_hash);
+	kfree(gtp->tid_hash);
+}
+
 static int gtp_newlink(struct net *src_net, struct net_device *dev,
 		       struct nlattr *tb[], struct nlattr *data[],
 		       struct netlink_ext_ack *extack)

@@ -681,13 +688,15 @@ static int gtp_newlink(struct net *src_n
 
 	gn = net_generic(dev_net(dev), gtp_net_id);
 	list_add_rcu(&gtp->list, &gn->gtp_dev_list);
+	dev->priv_destructor = gtp_destructor;
 
 	netdev_dbg(dev, "registered new GTP interface\n");
 
 	return 0;
 
 out_hashtable:
-	gtp_hashtable_free(gtp);
+	kfree(gtp->addr_hash);
+	kfree(gtp->tid_hash);
 out_encap:
 	gtp_encap_disable(gtp);
 	return err;

@@ -696,9 +705,14 @@ out_encap:
 static void gtp_dellink(struct net_device *dev, struct list_head *head)
 {
 	struct gtp_dev *gtp = netdev_priv(dev);
+	struct pdp_ctx *pctx;
+	int i;
+
+	for (i = 0; i < gtp->hash_size; i++)
+		hlist_for_each_entry_rcu(pctx, &gtp->tid_hash[i], hlist_tid)
+			pdp_context_delete(pctx);
 
 	gtp_encap_disable(gtp);
-	gtp_hashtable_free(gtp);
 	list_del_rcu(&gtp->list);
 	unregister_netdevice_queue(dev, head);
 }

@@ -774,20 +788,6 @@ err1:
 	return -ENOMEM;
 }
 
-static void gtp_hashtable_free(struct gtp_dev *gtp)
-{
-	struct pdp_ctx *pctx;
-	int i;
-
-	for (i = 0; i < gtp->hash_size; i++)
-		hlist_for_each_entry_rcu(pctx, &gtp->tid_hash[i], hlist_tid)
-			pdp_context_delete(pctx);
-
-	synchronize_rcu();
-	kfree(gtp->addr_hash);
-	kfree(gtp->tid_hash);
-}
-
 static struct sock *gtp_encap_enable_socket(int fd, int type,
 					    struct gtp_dev *gtp)
 {

Greg Kroah-Hartman

author maintainer

2020-01-02 22:27 UTC #91 lore raw

PATCH 91/91 gtp: avoid zero size hashtable

From: Taehee Yoo <[email protected]>

[ Upstream commit 6a902c0f31993ab02e1b6ea7085002b9c9083b6a ]

GTP default hashtable size is 1024 and userspace could set specific hashtable size with IFLA_GTP_PDP_HASHSIZE. If hashtable size is set to 0 from userspace, hashtable will not work and panic will occur.

Fixes 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")

Signed-off-by Taehee Yoo <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/gtp.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

drivers/net/gtp.c +5 -2

@@ -671,10 +671,13 @@ static int gtp_newlink(struct net *src_n
 	if (err < 0)
 		return err;
 
-	if (!data[IFLA_GTP_PDP_HASHSIZE])
+	if (!data[IFLA_GTP_PDP_HASHSIZE]) {
 		hashsize = 1024;
-	else
+	} else {
 		hashsize = nla_get_u32(data[IFLA_GTP_PDP_HASHSIZE]);
+		if (!hashsize)
+			hashsize = 1024;
+	}
 
 	err = gtp_hashtable_new(gtp, hashsize);
 	if (err < 0)

Guenter Roeck

2020-01-02 23:05 UTC #92 lore raw

Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.14.162 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 04 Jan 2020 22:01:54 +0000. Anything received after that time might be too late.

drivers/pci/switch/switchtec.c: In function 'ioctl_event_summary':
drivers/pci/switch/switchtec.c:901:18: error: implicit declaration of function 'readq'; did you mean 'readl'?

The problem also affects v4.19.y. Seen with various 32-bit builds, including i386:allmodconfig and arm:allmodconfig.

The backport replaces ioread64 with readq, which may not have been such a good idea.

Guenter

Sasha Levin

maintainer

2020-01-03 00:16 UTC #93 lore raw

Quoted 10 lines · Guenter Roeck

Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.14.162 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 04 Jan 2020 22:01:54 +0000. Anything received after that time might be too late.

Quoted 8 lines

drivers/pci/switch/switchtec.c: In function 'ioctl_event_summary':
drivers/pci/switch/switchtec.c:901:18: error: implicit declaration of function 'readq'; did you mean 'readl'?
The problem also affects v4.19.y. Seen with various 32-bit builds, including i386:allmodconfig and arm:allmodconfig.
The backport replaces ioread64 with readq, which may not have been such a good idea.

Indeed. I'll drop it for now, thanks!

Signature · 2 lines

Thanks,
Sasha

Greg Kroah-Hartman

author maintainer

2020-01-03 08:38 UTC #94 lore raw

Quoted 14 lines · Sasha Levin

Quoted 13 lines · Guenter Roeck
Quoted 8 lines · Greg Kroah-Hartman
This is the start of the stable review cycle for the 4.14.162 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 04 Jan 2020 22:01:54 +0000. Anything received after that time might be too late.
drivers/pci/switch/switchtec.c: In function 'ioctl_event_summary':
drivers/pci/switch/switchtec.c:901:18: error: implicit declaration of function 'readq'; did you mean 'readl'?

Quoted 7 lines

Quoted 5 lines
The problem also affects v4.19.y. Seen with various 32-bit builds, including i386:allmodconfig and arm:allmodconfig.
The backport replaces ioread64 with readq, which may not have been such a good idea.
Indeed. I'll drop it for now, thanks!

I've pushed out -rc2 versions with this patch removed now.

thanks,

greg k-h

Naresh Kamboju

2020-01-03 13:43 UTC #95 lore raw

Quoted 1 line

I've pushed out -rc2 versions with this patch removed now.

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.14.162-rc2
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 0e6f77cf689c028a3c0927237bac986deca2c3fd
git describe: v4.14.161-91-g0e6f77cf689c
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.161-91-g0e6f77cf689c

No regressions (compared to build v4.14.161)

No fixes (compared to build v4.14.161)

Ran 22654 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* linux-log-parser
* ltp-containers-tests
* ltp-fs-tests
* ltp-cve-tests
* spectre-meltdown-checker-test
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-cpuhotplug-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* v4l2-compliance
* kvm-unit-tests

Signature · 2 lines

Linaro LKFT
https://lkft.linaro.org

Guenter Roeck

2020-01-03 14:29 UTC #96 lore raw

Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.14.162 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 04 Jan 2020 22:01:54 +0000. Anything received after that time might be too late.

Build results:

	total: 172 pass: 171 fail: 1
Failed builds:
	sparc64:allmodconfig
Qemu test results:
	total: 373 pass: 373 fail: 0

Same problem as with v4.19.y.

Guenter

Jon Hunter

maintainer

2020-01-03 17:50 UTC #97 lore raw

Quoted 14 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.14.162 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Sat, 04 Jan 2020 22:01:54 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.162-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

Quoted 5 lines

thanks,
greg k-h
-------------

All tests are passing for Tegra ...

Test results for stable-v4.14:

    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version: 4.14.162-rc2-g0e6f77cf689c
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

Signature · 1 line

nvpublic

shuah

2020-01-03 22:01 UTC #98 lore raw