Skip to contentSkip to conversation

dt-bindings: display: Convert Allwinner display pipeline to schemas

PATCH In review Maxime Ripard 4 participants 13 messages Jan 3, 2020 – Jan 9, 2020

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/4 dt-bindings: display: Convert Allwinner display pipeline to schemas

The Allwinner SoCs have a display engine composed of several controllers assembled differently depending on the SoC, the number and type of output they have, and the additional features they provide. A number of those are supported in Linux, with the matching bindings.

Now that we have the DT validation in place, let's split into separate file and convert the device tree bindings for those controllers to schemas.

---

Changes from v2:
- Changed a number of maxItems to minItems to make more sense
- Fixed a few enum that were improperly declared. This raised a bunch of warnings that were unnoticed before. Fixed them.
- Added an if clause to the HDMI PHY binding to check the number of clocks

Changes from v1:
- Declare the ports in the bindings

---
 .../allwinner,sun4i-a10-display-backend.yaml  | 291 ++++++++
 .../allwinner,sun4i-a10-display-engine.yaml   | 114 +++
 .../allwinner,sun4i-a10-display-frontend.yaml | 138 ++++
 .../display/allwinner,sun4i-a10-hdmi.yaml     | 183 +++++
 .../display/allwinner,sun4i-a10-tcon.yaml     | 676 ++++++++++++++++++
 .../allwinner,sun4i-a10-tv-encoder.yaml       |  62 ++
 .../display/allwinner,sun6i-a31-drc.yaml      | 138 ++++
 .../allwinner,sun8i-a83t-de2-mixer.yaml       | 118 +++
 .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 273 +++++++
 .../allwinner,sun8i-a83t-hdmi-phy.yaml        | 117 +++
 .../display/allwinner,sun8i-r40-tcon-top.yaml | 382 ++++++++++
 .../display/allwinner,sun9i-a80-deu.yaml      | 133 ++++
 .../bindings/display/sunxi/sun4i-drm.txt      | 637 -----------------
 13 files changed, 2625 insertions(+), 637 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml new file +291 -0
new file mode 100644
index 000000000000..86057d541065
@@ -0,0 +1,291 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Engine Backend Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <[email protected]>
+  - Maxime Ripard <[email protected]>
+
+description: |
+  The display engine backend exposes layers and sprites to the system.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-display-backend
+      - allwinner,sun5i-a13-display-backend
+      - allwinner,sun6i-a31-display-backend
+      - allwinner,sun7i-a20-display-backend
+      - allwinner,sun8i-a23-display-backend
+      - allwinner,sun8i-a33-display-backend
+      - allwinner,sun9i-a80-display-backend
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Display Backend registers
+      - description: SAT registers
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: be
+      - const: sat
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+    items:
+      - description: The backend interface clock
+      - description: The backend module clock
+      - description: The backend DRAM clock
+      - description: The SAT clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+      - const: sat
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: The Backend reset line
+      - description: The SAT reset line
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: be
+      - const: sat
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnects:
+    maxItems: 1
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnect-names:
+    const: dma-mem
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun8i-a33-display-backend
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+    reg-names:
+      minItems: 2
+
+    clocks:
+      minItems: 4
+
+    clock-names:
+      minItems: 4
+
+    resets:
+      minItems: 2
+
+    reset-names:
+      minItems: 2
+
+  required:
+    - reg-names
+    - reset-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+    reg-names:
+      maxItems: 1
+
+    clocks:
+      maxItems: 3
+
+    clock-names:
+      maxItems: 3
+
+    resets:
+      maxItems: 1
+
+    reset-names:
+      maxItems: 1
+
+examples:
+  - |
+    /*
+     * This comes from the clock/sun4i-a10-ccu.h and
+     * reset/sun4i-a10-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_AHB_DE_BE0	42
+    #define CLK_DRAM_DE_BE0	140
+    #define CLK_DE_BE0		144
+    #define RST_DE_BE0		5
+
+    display-backend@1e60000 {
+        compatible = "allwinner,sun4i-a10-display-backend";
+        reg = <0x01e60000 0x10000>;
+        interrupts = <47>;
+        clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+                 <&ccu CLK_DRAM_DE_BE0>;
+        clock-names = "ahb", "mod",
+                      "ram";
+        resets = <&ccu RST_DE_BE0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&fe0_out_be0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&fe1_out_be0>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon0_in_be0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon1_in_be0>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun8i-a23-a33-ccu.h and
+     * reset/sun8i-a23-a33-ccu.h headers, but we can't include them
+     * since it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_BUS_DE_BE	40
+    #define CLK_BUS_SAT		46
+    #define CLK_DRAM_DE_BE	84
+    #define CLK_DE_BE		85
+    #define RST_BUS_DE_BE	21
+    #define RST_BUS_SAT		27
+
+    display-backend@1e60000 {
+        compatible = "allwinner,sun8i-a33-display-backend";
+        reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+        reg-names = "be", "sat";
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+                 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+        clock-names = "ahb", "mod",
+                      "ram", "sat";
+        resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+        reset-names = "be", "sat";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&fe0_out_be0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                endpoint {
+                    remote-endpoint = <&drc0_in_be0>;
+                };
+            };
+        };
+    };
+
+...
Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml new file +114 -0

114 lines not on this page · raw message

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml new file +138 -0

138 lines not on this page · raw message

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml new file +183 -0

183 lines not on this page · raw message

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml new file +676 -0

676 lines not on this page · raw message

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml new file +62 -0

62 lines not on this page · raw message

Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml new file +138 -0

138 lines not on this page · raw message

Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml new file +118 -0

118 lines not on this page · raw message

Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml new file +273 -0

273 lines not on this page · raw message

Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml new file +117 -0

117 lines not on this page · raw message

Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml new file +382 -0

382 lines not on this page · raw message

Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml new file +133 -0

133 lines not on this page · raw message

Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt deleted +0 -637

375 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 7 lines
2.24.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Part of the diff is not shown here. View the raw message.

#1 lore raw

PATCH v3 2/4 clk: sunxi: a31: Export the MIPI PLL

The MIPI PLL is used for LVDS. Make sure it's exported in the dt bindings headers.

---
 drivers/clk/sunxi-ng/ccu-sun6i-a31.h      | 4 +++-
 include/dt-bindings/clock/sun6i-a31-ccu.h | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)
drivers/clk/sunxi-ng/ccu-sun6i-a31.h +3 -1
index a361388b4670..3ed2a59b0dc6 100644
@@ -32,7 +32,9 @@
 /* The PLL_VIDEO1_2X clock is exported */
 
 #define CLK_PLL_GPU		14
-#define CLK_PLL_MIPI		15
+
+/* The PLL_VIDEO1_2X clock is exported */
+
 #define CLK_PLL9		16
 #define CLK_PLL10		17
 
include/dt-bindings/clock/sun6i-a31-ccu.h +2 -0
index c5d13340184a..39878d9dce9f 100644
@@ -49,6 +49,8 @@
 
 #define CLK_PLL_VIDEO1_2X	13
 
+#define CLK_PLL_MIPI		15
+
 #define CLK_CPU			18
 
 #define CLK_AHB1_MIPIDSI	23
Signature · 7 lines
2.24.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author Applied
#3 lore raw

Re: [PATCH v3 2/4] clk: sunxi: a31: Export the MIPI PLL

Quoted 8 lines · Chen-Yu Tsai
Quoted 5 lines · Maxime Ripard

The MIPI PLL is used for LVDS. Make sure it's exported in the dt bindings headers.

Applied, thanks!
Maxime

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#4 lore raw

PATCH v3 3/4 clk: sunxi: a23/a33: Export the MIPI PLL

In reply to Maxime Ripard

The MIPI PLL is used for LVDS. Make sure it's exported in the dt bindings headers.

---
 drivers/clk/sunxi-ng/ccu-sun8i-a23-a33.h      | 4 +++-
 include/dt-bindings/clock/sun8i-a23-a33-ccu.h | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)
drivers/clk/sunxi-ng/ccu-sun8i-a23-a33.h +3 -1
index 72df69291cc6..5bf5c4d13b4c 100644
@@ -24,7 +24,9 @@
 #define CLK_PLL_PERIPH		10
 #define CLK_PLL_PERIPH_2X	11
 #define CLK_PLL_GPU		12
-#define CLK_PLL_MIPI		13
+
+/* The PLL MIPI clock is exported */
+
 #define CLK_PLL_HSIC		14
 #define CLK_PLL_DE		15
 #define CLK_PLL_DDR1		16
include/dt-bindings/clock/sun8i-a23-a33-ccu.h +2 -0
index f8222b6b2cc3..eb524d0bbd01 100644
@@ -43,6 +43,8 @@
 #ifndef _DT_BINDINGS_CLK_SUN8I_A23_A33_H_
 #define _DT_BINDINGS_CLK_SUN8I_A23_A33_H_
 
+#define CLK_PLL_MIPI		13
+
 #define CLK_CPUX		18
 
 #define CLK_BUS_MIPI_DSI	23
Signature · 7 lines
2.24.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author Applied
#6 lore raw

Re: [PATCH v3 3/4] clk: sunxi: a23/a33: Export the MIPI PLL

Quoted 8 lines · Chen-Yu Tsai
Quoted 5 lines · Maxime Ripard

The MIPI PLL is used for LVDS. Make sure it's exported in the dt bindings headers.

Applied, thanks!
Maxime

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#7 lore raw

PATCH v3 4/4 ARM: dts: sunxi: Add missing LVDS resets and clocks

In reply to Maxime Ripard

Some old SoCs, while supporting LVDS, don't list the LVDS clocks and reset lines. Let's add them when relevant.

---
 arch/arm/boot/dts/sun6i-a31.dtsi     | 23 +++++++++++++++--------
 arch/arm/boot/dts/sun8i-a23-a33.dtsi | 12 ++++++++----
 arch/arm/boot/dts/sun9i-a80.dtsi     |  8 ++++++--
 3 files changed, 29 insertions(+), 14 deletions(-)
arch/arm/boot/dts/sun6i-a31.dtsi +15 -8
index 4d622ec48b24..7762fbd9a133 100644
@@ -286,14 +286,18 @@ tcon0: lcd-controller@1c0c000 {
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&dma 11>;
-			resets = <&ccu RST_AHB1_LCD0>;
-			reset-names = "lcd";
+			resets = <&ccu RST_AHB1_LCD0>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
 			clocks = <&ccu CLK_AHB1_LCD0>,
 				 <&ccu CLK_LCD0_CH0>,
-				 <&ccu CLK_LCD0_CH1>;
+				 <&ccu CLK_LCD0_CH1>,
+				 <&ccu 15>;
 			clock-names = "ahb",
 				      "tcon-ch0",
-				      "tcon-ch1";
+				      "tcon-ch1",
+				      "lvds-alt";
 			clock-output-names = "tcon0-pixel-clock";
 			#clock-cells = <0>;
 
@@ -336,14 +340,17 @@ tcon1: lcd-controller@1c0d000 {
 			reg = <0x01c0d000 0x1000>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&dma 12>;
-			resets = <&ccu RST_AHB1_LCD1>;
-			reset-names = "lcd";
+			resets = <&ccu RST_AHB1_LCD1>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd", "lvds";
 			clocks = <&ccu CLK_AHB1_LCD1>,
 				 <&ccu CLK_LCD1_CH0>,
-				 <&ccu CLK_LCD1_CH1>;
+				 <&ccu CLK_LCD1_CH1>,
+				 <&ccu 15>;
 			clock-names = "ahb",
 				      "tcon-ch0",
-				      "tcon-ch1";
+				      "tcon-ch1",
+				      "lvds-alt";
 			clock-output-names = "tcon1-pixel-clock";
 			#clock-cells = <0>;
 
arch/arm/boot/dts/sun8i-a23-a33.dtsi +8 -4
index 70ec3493061b..48487f6d4ab9 100644
@@ -184,13 +184,17 @@ tcon0: lcd-controller@1c0c000 {
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&dma 12>;
 			clocks = <&ccu CLK_BUS_LCD>,
-				 <&ccu CLK_LCD_CH0>;
+				 <&ccu CLK_LCD_CH0>,
+				 <&ccu 13>;
 			clock-names = "ahb",
-				      "tcon-ch0";
+				      "tcon-ch0",
+				      "lvds-alt";
 			clock-output-names = "tcon-pixel-clock";
 			#clock-cells = <0>;
-			resets = <&ccu RST_BUS_LCD>;
-			reset-names = "lcd";
+			resets = <&ccu RST_BUS_LCD>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
 			status = "disabled";
 
 			ports {
arch/arm/boot/dts/sun9i-a80.dtsi +6 -2
index 3b533e85da43..ce4fa6706d06 100644
@@ -878,8 +878,12 @@ tcon0: lcd-controller@3c00000 {
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
 			clock-names = "ahb", "tcon-ch0";
-			resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>;
-			reset-names = "lcd", "edp";
+			resets = <&ccu RST_BUS_LCD0>,
+				 <&ccu RST_BUS_EDP>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "edp",
+				      "lvds";
 			clock-output-names = "tcon0-pixel-clock";
 			#clock-cells = <0>;
 
Signature · 7 lines
2.24.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Acked-by on v3 4/4
#8 lore raw

Re: [PATCH v3 4/4] ARM: dts: sunxi: Add missing LVDS resets and clocks

Quoted 5 lines · Maxime Ripard

Some old SoCs, while supporting LVDS, don't list the LVDS clocks and reset lines. Let's add them when relevant.

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

author Applied
#9 lore raw

Re: [PATCH v3 4/4] ARM: dts: sunxi: Add missing LVDS resets and clocks

Quoted 8 lines · Chen-Yu Tsai
Quoted 5 lines · Maxime Ripard

Some old SoCs, while supporting LVDS, don't list the LVDS clocks and reset lines. Let's add them when relevant.

Applied, thanks!
Maxime

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

maintainer
#10 lore raw
In reply to Maxime Ripard

Hi Rob,

Quoted 12 lines · Maxime Ripard

The Allwinner SoCs have a display engine composed of several controllers assembled differently depending on the SoC, the number and type of output they have, and the additional features they provide. A number of those are supported in Linux, with the matching bindings.

Now that we have the DT validation in place, let's split into separate file and convert the device tree bindings for those controllers to schemas.

---

Quoted 8 lines

Changes from v2:
- Changed a number of maxItems to minItems to make more sense
- Fixed a few enum that were improperly declared. This raised a bunch of warnings that were unnoticed before. Fixed them.
- Added an if clause to the HDMI PHY binding to check the number of clocks

Changes from v1:
- Declare the ports in the bindings

Does that new version address your comments?

As you know, this is the final schema patch for the Allwinner SoCs, so I'd like to get this merged in 5.6 to close this off. Thanks!

Maxime

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reviewed-by on v3 1/4
#11 lore raw
In reply to Maxime Ripard
Quoted 41 lines · Maxime Ripard

The Allwinner SoCs have a display engine composed of several controllers assembled differently depending on the SoC, the number and type of output they have, and the additional features they provide. A number of those are supported in Linux, with the matching bindings.

Now that we have the DT validation in place, let's split into separate file and convert the device tree bindings for those controllers to schemas.

---

Changes from v2:
- Changed a number of maxItems to minItems to make more sense
- Fixed a few enum that were improperly declared. This raised a bunch of warnings that were unnoticed before. Fixed them.
- Added an if clause to the HDMI PHY binding to check the number of clocks

Changes from v1:
- Declare the ports in the bindings

---
 .../allwinner,sun4i-a10-display-backend.yaml  | 291 ++++++++
 .../allwinner,sun4i-a10-display-engine.yaml   | 114 +++
 .../allwinner,sun4i-a10-display-frontend.yaml | 138 ++++
 .../display/allwinner,sun4i-a10-hdmi.yaml     | 183 +++++
 .../display/allwinner,sun4i-a10-tcon.yaml     | 676 ++++++++++++++++++
 .../allwinner,sun4i-a10-tv-encoder.yaml       |  62 ++
 .../display/allwinner,sun6i-a31-drc.yaml      | 138 ++++
 .../allwinner,sun8i-a83t-de2-mixer.yaml       | 118 +++
 .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 273 +++++++
 .../allwinner,sun8i-a83t-hdmi-phy.yaml        | 117 +++
 .../display/allwinner,sun8i-r40-tcon-top.yaml | 382 ++++++++++
 .../display/allwinner,sun9i-a80-deu.yaml      | 133 ++++
 .../bindings/display/sunxi/sun4i-drm.txt      | 637 -----------------
 13 files changed, 2625 insertions(+), 637 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
Quoted 8 lines
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#12 lore raw
Quoted 51 lines · Rob Herring
Quoted 41 lines · Maxime Ripard

The Allwinner SoCs have a display engine composed of several controllers assembled differently depending on the SoC, the number and type of output they have, and the additional features they provide. A number of those are supported in Linux, with the matching bindings.

Now that we have the DT validation in place, let's split into separate file and convert the device tree bindings for those controllers to schemas.

---

Changes from v2:
- Changed a number of maxItems to minItems to make more sense
- Fixed a few enum that were improperly declared. This raised a bunch of warnings that were unnoticed before. Fixed them.
- Added an if clause to the HDMI PHY binding to check the number of clocks

Changes from v1:
- Declare the ports in the bindings

---
 .../allwinner,sun4i-a10-display-backend.yaml  | 291 ++++++++
 .../allwinner,sun4i-a10-display-engine.yaml   | 114 +++
 .../allwinner,sun4i-a10-display-frontend.yaml | 138 ++++
 .../display/allwinner,sun4i-a10-hdmi.yaml     | 183 +++++
 .../display/allwinner,sun4i-a10-tcon.yaml     | 676 ++++++++++++++++++
 .../allwinner,sun4i-a10-tv-encoder.yaml       |  62 ++
 .../display/allwinner,sun6i-a31-drc.yaml      | 138 ++++
 .../allwinner,sun8i-a83t-de2-mixer.yaml       | 118 +++
 .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 273 +++++++
 .../allwinner,sun8i-a83t-hdmi-phy.yaml        | 117 +++
 .../display/allwinner,sun8i-r40-tcon-top.yaml | 382 ++++++++++
 .../display/allwinner,sun9i-a80-deu.yaml      | 133 ++++
 .../bindings/display/sunxi/sun4i-drm.txt      | 637 -----------------
 13 files changed, 2625 insertions(+), 637 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
Quoted 8 lines
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
 create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
 delete mode 100644 Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
Quoted 1 line

Thanks!

I just applied it to drm-misc-next

Maxime

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel