Skip to contentSkip to conversation

dt-bindings: Add vendor prefix for Xinpeng Technology

PATCH In review Heiko Stuebner 2 participants 4 messages Dec 24, 2019 – Jan 4, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v5 1/3 dt-bindings: Add vendor prefix for Xinpeng Technology

From: Heiko Stuebner <[email protected]>

Shenzhen Xinpeng Technology Co., Ltd produces for example display panels.

---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index 6046f4555852..85e7c26a05c7 100644
@@ -1056,6 +1056,8 @@ patternProperties:
     description: Extreme Engineering Solutions (X-ES)
   "^xillybus,.*":
     description: Xillybus Ltd.
+  "^xinpeng,.*":
+    description: Shenzhen Xinpeng Technology Co., Ltd
   "^xlnx,.*":
     description: Xilinx
   "^xunlong,.*":
Signature · 6 lines
2.24.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw

PATCH v5 2/3 dt-bindings: display: panel: Add binding document for Xinpeng XPP055C272

From: Heiko Stuebner <[email protected]>

The XPP055C272 is a 5.5" 720x1280 DSI display.

changes in v4:
- fix id (Maxime)
- drop port (Maxime)
changes in v2:
- add size info into binding title (Sam)
- add more required properties (Sam)

---
 .../display/panel/xinpeng,xpp055c272.yaml     | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml new file +47 -0
new file mode 100644
index 000000000000..378cf9e2549d
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/xinpeng,xpp055c272.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xinpeng XPP055C272 5.5in 720x1280 DSI panel
+
+maintainers:
+  - Heiko Stuebner <[email protected]>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: xinpeng,xpp055c272
+  reg: true
+  backlight: true
+  reset-gpios: true
+  iovcc-supply:
+     description: regulator that supplies the iovcc voltage
+  vci-supply:
+     description: regulator that supplies the vci voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - iovcc-supply
+  - vci-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi@ff450000 {
+        panel@0 {
+            compatible = "xinpeng,xpp055c272";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vci-supply = <&vcc3v3_lcd>;
+        };
+    };
+
+...
Signature · 6 lines
2.24.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#2 lore raw

PATCH v5 3/3 drm/panel: add panel driver for Xinpeng XPP055C272 panels

In reply to Heiko Stuebner

From: Heiko Stuebner <[email protected]>

Base on the somewhat similar Rocktech driver but adapted for panel-specific init of the XPP055C272.

changes in v5:
- drop error message when backlight not found, no other panel does that and if needed it should live in drm_panel_of_backlight
changes in v4:
none
changes in v3:
- remove wrong negative sync flags from display-mode to fix a display artifact of the output getting move a tiny bit to the right
changes in v2:
- move to drm-panel-internal backlight handling (Sam)
- adapt to changes that happened to drm_panel structs+functions (Sam)
- sort includes (Sam)
- drop unnecessary DRV_NAME constant (Sam)
- do mipi_dsi_dcs_exit_sleep_mode and mipi_dsi_dcs_set_display_on in panel prepare (not init_sequence) to keep symmetric (Sam)

---
 drivers/gpu/drm/panel/Kconfig                 |  10 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-xinpeng-xpp055c272.c  | 398 ++++++++++++++++++
 3 files changed, 409 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c
drivers/gpu/drm/panel/Kconfig +10 -0
index 683ff77a3733..d86d875de783 100644
@@ -366,4 +366,14 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
 	help
 	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
 	  Video Mode panel
+
+config DRM_PANEL_XINPENG_XPP055C272
+	tristate "Xinpeng XPP055C272 panel driver"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Xinpeng
+	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
+	  system interfaces.
 endmenu
drivers/gpu/drm/panel/Makefile +1 -0
index 8783476110a3..f7cf83672fb8 100644
@@ -39,3 +39,4 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
 obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
+obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o
drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c new file +398 -0

398 lines not on this page · raw message

Signature · 6 lines
2.24.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#3 lore raw
In reply to Heiko Stuebner

Hi Heiko.

Thanks for your work on this.

Quoted 7 lines · Heiko Stuebner

From: Heiko Stuebner <[email protected]>

Shenzhen Xinpeng Technology Co., Ltd produces for example display panels.

This and the following two patches are now applied to drm-misc-next.

Sam
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel