reset: qcom-aoss: Allow CONFIG_RESET_QCOM_AOSS to be a tristate
Subsystems (2)
PATCH v3 1/1 reset: qcom-aoss: Allow CONFIG_RESET_QCOM_AOSS to be a tristate
Allow CONFIG_RESET_QCOM_AOSS to be set as as =m to allow for the driver to be loaded from a modules.
Also replaces the builtin_platform_driver() line with module_platform_driver() and adds a MODULE_DEVICE_TABLE() entry.
---
v2: Fix builtin_platform_driver line in driver code
v3: Add MODULE_DEVICE_TABLE() as suggested by Bjorn
--- drivers/reset/Kconfig | 2 +- drivers/reset/reset-qcom-aoss.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-)
drivers/reset/Kconfig +1 -1
@@ -99,7 +99,7 @@ config RESET_PISTACHIO This enables the reset driver for ImgTec Pistachio SoCs. config RESET_QCOM_AOSS - bool "Qcom AOSS Reset Driver" + tristate "Qcom AOSS Reset Driver" depends on ARCH_QCOM || COMPILE_TEST help This enables the AOSS (always on subsystem) reset driver
drivers/reset/reset-qcom-aoss.c +2 -1
@@ -118,6 +118,7 @@ static const struct of_device_id qcom_aoss_reset_of_match[] = { { .compatible = "qcom,sdm845-aoss-cc", .data = &sdm845_aoss_desc }, {} }; +MODULE_DEVICE_TABLE (of, qcom_aoss_reset_of_match);static struct platform_driver qcom_aoss_reset_driver = { .probe = qcom_aoss_reset_probe,
@@ -127,7 +128,7 @@ static struct platform_driver qcom_aoss_reset_driver = { }, }; -builtin_platform_driver (qcom_aoss_reset_driver); +module_platform_driver (qcom_aoss_reset_driver);MODULE_DESCRIPTION ("Qualcomm AOSS Reset Driver" );MODULE_LICENSE ("GPL v2" );
Signature · 1 line
2.17.1
Quoted 6 lines · John Stultz
Allow
CONFIG_RESET_QCOM_AOSSto be set as as =m to allow for the driver to be loaded from a modules.Also replaces the
builtin_platform_driver()line withmodule_platform_driver()and adds aMODULE_DEVICE_TABLE()entry.
Quoted 6 lines
Cc Todd Kjos <[email protected]>Cc Alistair Delva <[email protected]>Cc Bjorn Andersson <[email protected]>Cc Amit Pundir <[email protected]>Cc Philipp Zabel <[email protected]>Signed-off-by John Stultz <[email protected]>
Quoted 45 lines
---
v2: Fixbuiltin_platform_driverline in driver code
v3: AddMODULE_DEVICE_TABLE()as suggested by Bjorn--- drivers/reset/Kconfig | 2 +- drivers/reset/reset-qcom-aoss.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-)drivers/reset/Kconfig +1
-1@@ -99,7 +99,7 @@ config RESET_PISTACHIO This enables the reset driver for ImgTec Pistachio SoCs. config RESET_QCOM_AOSS - bool "Qcom AOSS Reset Driver" + tristate "Qcom AOSS Reset Driver" depends on ARCH_QCOM || COMPILE_TEST help This enables the AOSS (always on subsystem) reset driverdrivers/reset/reset-qcom-aoss.c +2
-1@@ -118,6 +118,7 @@ static const struct of_device_id qcom_aoss_reset_of_match[] = { { .compatible = "qcom,sdm845-aoss-cc", .data = &sdm845_aoss_desc }, {} }; +MODULE_DEVICE_TABLE (of, qcom_aoss_reset_of_match);static struct platform_driver qcom_aoss_reset_driver = { .probe = qcom_aoss_reset_probe,@@ -127,7 +128,7 @@ static struct platform_driver qcom_aoss_reset_driver = { }, }; -builtin_platform_driver (qcom_aoss_reset_driver); +module_platform_driver (qcom_aoss_reset_driver);MODULE_DESCRIPTION ("Qualcomm AOSS Reset Driver" );MODULE_LICENSE ("GPL v2" );Signature · 1 line
2.17.1
Hi John, Bjorn,
Quoted 8 lines · Bjorn Andersson
Quoted 6 lines · John Stultz
Allow
CONFIG_RESET_QCOM_AOSSto be set as as =m to allow for the driver to be loaded from a modules.Also replaces the
builtin_platform_driver()line withmodule_platform_driver()and adds aMODULE_DEVICE_TABLE()entry.
Quoted 8 lines
Quoted 6 lines
Cc Todd Kjos <[email protected]>Cc Alistair Delva <[email protected]>Cc Bjorn Andersson <[email protected]>Cc Amit Pundir <[email protected]>Cc Philipp Zabel <[email protected]>Signed-off-by John Stultz <[email protected]>Reviewed-by Bjorn Andersson <[email protected]>
Thank you, applied to reset/next.
regards
Philipp