Skip to contentSkip to conversation

regulator: mpq7920: add mpq7920 regulator driver

PATCH In review Saravanan Sekar 2 participants 2 messages Jan 9, 2020

Subsystems (2)
lore
Share & tools
lore

Saravanan Sekar

author maintainer
#0 lore raw

PATCH v7 1/1 regulator: mpq7920: add mpq7920 regulator driver

Adding regulator driver for the device mpq7920.
The MPQ7920 PMIC device contains four DC-DC buck converters and five regulators, is designed for automotive and accessed over I2C.

Fixed sparse warning reported on this patch

---

Notes:
patch based on -next.

 drivers/regulator/Kconfig   |  10 ++
 drivers/regulator/Makefile  |   1 +
 drivers/regulator/mpq7920.c | 346 ++++++++++++++++++++++++++++++++++++
 drivers/regulator/mpq7920.h |  68 +++++++
 4 files changed, 425 insertions(+)
 create mode 100644 drivers/regulator/mpq7920.c
 create mode 100644 drivers/regulator/mpq7920.h
drivers/regulator/Kconfig +10 -0
index 593733a88a61..9fe2aa9fbbc1 100644
@@ -623,6 +623,16 @@ config REGULATOR_MP8859
 	  Say M here if you want to include support for the regulator as a
 	  module. The module will be named "mp8859".
 
+config REGULATOR_MPQ7920
+	tristate "Monolithic MPQ7920 PMIC"
+	depends on I2C && OF
+	select REGMAP_I2C
+	help
+	  Say y here to support the MPQ7920 PMIC. This will enable supports
+	  the software controllable 4 buck and 5 LDO regulators.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6311
 	tristate "MediaTek MT6311 PMIC"
 	depends on I2C
drivers/regulator/Makefile +1 -0
index 8ba8e5deebbd..b8c9072f8500 100644
@@ -79,6 +79,7 @@ obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o
 obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o
+obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
drivers/regulator/mpq7920.c new file +346 -0

346 lines not on this page · raw message

drivers/regulator/mpq7920.h new file +68 -0

68 lines not on this page · raw message

Signature · 1 line
2.17.1
maintainer
#1 lore raw

Applied "regulator: mpq7920: add mpq7920 regulator driver" to the regulator tree

The patch

regulator: mpq7920: add mpq7920 regulator driver

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.6

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From 6501c1f54a172fb0a4a9413eb62ab672ab3d8e7c Mon Sep 17 00:00:00 2001
From: Saravanan Sekar <[email protected]>
Date: Thu, 9 Jan 2020 20:53:46 +0100
Subject: [PATCH] regulator: mpq7920: add mpq7920 regulator driver

Adding regulator driver for the device mpq7920.
The MPQ7920 PMIC device contains four DC-DC buck converters and five regulators, is designed for automotive and accessed over I2C.

Fixed sparse warning reported on this patch

---
 drivers/regulator/Kconfig   |  10 ++
 drivers/regulator/Makefile  |   1 +
 drivers/regulator/mpq7920.c | 346 ++++++++++++++++++++++++++++++++++++
 drivers/regulator/mpq7920.h |  68 +++++++
 4 files changed, 425 insertions(+)
 create mode 100644 drivers/regulator/mpq7920.c
 create mode 100644 drivers/regulator/mpq7920.h
drivers/regulator/Kconfig +10 -0
index 593733a88a61..9fe2aa9fbbc1 100644
@@ -623,6 +623,16 @@ config REGULATOR_MP8859
 	  Say M here if you want to include support for the regulator as a
 	  module. The module will be named "mp8859".
 
+config REGULATOR_MPQ7920
+	tristate "Monolithic MPQ7920 PMIC"
+	depends on I2C && OF
+	select REGMAP_I2C
+	help
+	  Say y here to support the MPQ7920 PMIC. This will enable supports
+	  the software controllable 4 buck and 5 LDO regulators.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6311
 	tristate "MediaTek MT6311 PMIC"
 	depends on I2C
drivers/regulator/Makefile +1 -0
index 8ba8e5deebbd..b8c9072f8500 100644
@@ -79,6 +79,7 @@ obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o
 obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o
+obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
drivers/regulator/mpq7920.c new file +346 -0

346 lines not on this page · raw message

drivers/regulator/mpq7920.h new file +68 -0

68 lines not on this page · raw message

Signature · 1 line
2.20.1