Skip to contentSkip to conversation

Add Global clock controller support for IPQ6018

PATCH Applied Sricharan R 2 participants 5 messages Jan 9, 2020 – Jan 10, 2020

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

v2 cover Add Global clock controller support for IPQ6018

The IPQ6018 is Qualcomm’s 802.11ax/u2019s SoC for Routers, Gateways and Access Points.

[V2]
* Addressed sparse warnings reported by Kbuild test robot.

This series adds Global clock controller support for ipq6018.

Sricharan R (2):
clk: qcom: Add DT bindings for ipq6018 gcc clock controller
clk: qcom: Add ipq6018 Global Clock Controller support

 .../devicetree/bindings/clock/qcom,gcc.yaml        |    3 +-
 drivers/clk/qcom/Kconfig                           |    8 +
 drivers/clk/qcom/Makefile                          |    1 +
 drivers/clk/qcom/gcc-ipq6018.c                     | 4643 ++++++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-ipq6018.h       |  262 ++
 include/dt-bindings/reset/qcom,gcc-ipq6018.h       |  157 +
 6 files changed, 5073 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/qcom/gcc-ipq6018.c
 create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq6018.h
 create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq6018.h
Signature · 1 line
1.9.1
#1 lore raw

PATCH v2 1/2 clk: qcom: Add DT bindings for ipq6018 gcc clock controller

Add the compatible strings and the include file for ipq6018 gcc clock controller.

---
 .../devicetree/bindings/clock/qcom,gcc.yaml        |   3 +-
 include/dt-bindings/clock/qcom,gcc-ipq6018.h       | 262 +++++++++++++++++++++
 include/dt-bindings/reset/qcom,gcc-ipq6018.h       | 157 ++++++++++++
 3 files changed, 421 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq6018.h
 create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq6018.h
Documentation/devicetree/bindings/clock/qcom,gcc.yaml +2 -1
index f2b5cd6..e08e666 100644
@@ -19,8 +19,9 @@ properties:
     enum:
        - qcom,gcc-apq8064
        - qcom,gcc-apq8084
-       - qcom,gcc-ipq8064
        - qcom,gcc-ipq4019
+       - qcom,gcc-ipq6018
+       - qcom,gcc-ipq8064
        - qcom,gcc-ipq8074
        - qcom,gcc-msm8660
        - qcom,gcc-msm8916
include/dt-bindings/clock/qcom,gcc-ipq6018.h new file +262 -0

262 lines not on this page · raw message

include/dt-bindings/reset/qcom,gcc-ipq6018.h new file +157 -0

157 lines not on this page · raw message

Signature · 1 line
2.7.4
maintainer Applied
#2 lore raw

Re: [PATCH V2 1/2] clk: qcom: Add DT bindings for ipq6018 gcc clock controller

Quoting Sricharan R (2020-01-09 00:05:20)

Quoted 11 lines

Add the compatible strings and the include file for ipq6018 gcc clock controller.

Quoted 1 line

---

Applied to clk-next

#3 lore raw

PATCH v2 2/2 clk: qcom: Add ipq6018 Global Clock Controller support

In reply to Sricharan R

This patch adds support for the global clock controller found on the ipq6018 based devices.

Also fixed the sparse warnings reported by,

---
[V2]
* Addressed sparse warnings reported by Kbuild test robot.

 drivers/clk/qcom/Kconfig       |    8 +
 drivers/clk/qcom/Makefile      |    1 +
 drivers/clk/qcom/gcc-ipq6018.c | 4635 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 4644 insertions(+)
 create mode 100644 drivers/clk/qcom/gcc-ipq6018.c
drivers/clk/qcom/Kconfig +8 -0
index 43d7397..c3ba6c8 100644
@@ -96,6 +96,14 @@ config IPQ_GCC_4019
 	  Say Y if you want to use peripheral devices such as UART, SPI,
 	  i2c, USB, SD/eMMC, etc.
 
+config IPQ_GCC_6018
+	tristate "IPQ6018 Global Clock Controller"
+	help
+	  Support for global clock controller on ipq6018 devices.
+	  Say Y if you want to use peripheral devices such as UART, SPI,
+	  i2c, USB, SD/eMMC, etc. Select this for the root clock
+	  of ipq6018.
+
 config IPQ_GCC_806X
 	tristate "IPQ806x Global Clock Controller"
 	help
drivers/clk/qcom/Makefile +1 -0
index 8432561..17d1be6 100644
@@ -20,6 +20,7 @@ clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
 obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
 obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
 obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
+obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
 obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
 obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o
 obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
drivers/clk/qcom/gcc-ipq6018.c new file +4635 -0

2,979 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.7.4

Part of the diff is not shown here. View the raw message.

maintainer Applied
#4 lore raw

Re: [PATCH V2 2/2] clk: qcom: Add ipq6018 Global Clock Controller support

Quoting Sricharan R (2020-01-09 00:05:21)

Quoted 12 lines

This patch adds support for the global clock controller found on the ipq6018 based devices.

Also fixed the sparse warnings reported by,

Quoted 1 line

---

Applied to clk-next