hsr: reset network header when supervision frame is created
Subsystems (4)
Sasha Levin
maintainerPATCH 1/3 hsr: reset network header when supervision frame is created
From: Taehee Yoo <[email protected]>
[ Upstream commit 3ed0a1d563903bdb4b4c36c58c4d9c1bcb23a6e6 ]
The supervision frame is L2 frame.
When supervision frame is created, hsr module doesn't set network header. If tap routine is enabled, dev_queue_xmit_nit() is called and it checks network_header. If network_header pointer wasn't set(or invalid), it resets network_header and warns.
In order to avoid unnecessary warning message, resetting network_header is needed.
Test commands:
ip netns add nst
ip link add veth0 type veth peer name veth1
ip link add veth2 type veth peer name veth3
ip link set veth1 netns nst
ip link set veth3 netns nst
ip link set veth0 up
ip link set veth2 up
ip link add hsr0 type hsr slave1 veth0 slave2 veth2
ip a a 192.168.100.1/24 dev hsr0
ip link set hsr0 up
ip netns exec nst ip link set veth1 up
ip netns exec nst ip link set veth3 up
ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1
ip netns exec nst ip link set hsr1 up
tcpdump -nei veth0
Splat looks like:
[ 175.852292][ C3] protocol 88fb is buggy, dev veth0
--- net/hsr/hsr_device.c | 2 ++ 1 file changed, 2 insertions(+)
net/hsr/hsr_device.c +2 -0
@@ -289,6 +289,8 @@ static void send_hsr_supervision_frame(struct hsr_port *master, u8 type) skb->dev->dev_addr, skb->len) <= 0) goto out;skb_reset_mac_header (skb); +skb_reset_network_header (skb); +skb_reset_transport_header (skb); hsr_stag = (typeof (hsr_stag ))skb_put (skb,sizeof (*hsr_stag));
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 2/3 hexagon: work around compiler crash
From: Nick Desaulniers <[email protected]>
[ Upstream commit 63e80314ab7cf4783526d2e44ee57a90514911c9 ]
Clang cannot translate the string "r30" into a valid register yet.
--- arch/hexagon/kernel/stacktrace.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
arch/hexagon/kernel/stacktrace.c +1 -3
@@ -23,8 +23,6 @@#include <linux/thread_info.h> #include <linux/module.h> -registerunsigned long current_frame_pointer asm("r30" ); -struct stackframe {unsigned long fp;unsigned long rets;
@@ -42,7 +40,7 @@ void save_stack_trace(struct stack_trace *trace) low = (unsigned long )task_stack_page (current); high = low +THREAD_SIZE ; - fp = current_frame_pointer; + fp = (unsigned long )__builtin_frame_address (0 );while (fp >= low && fp <= (high -sizeof (*frame))) { frame = (struct stackframe *)fp;
Signature · 1 line
2.20.1
Sasha Levin
maintainerPATCH 3/3 ocfs2: call journal flush to mark journal as empty after journal recovery when mount
In reply to Sasha LevinFrom: Kai Li <[email protected]>
[ Upstream commit 397eac17f86f404f5ba31d8c3e39ec3124b39fd3 ]
If journal is dirty when mount, it will be replayed but jbd2 sb log tail cannot be updated to mark a new start because journal->j_flag has already been set with JBD2_ABORT first in journal_init_common.
When a new transaction is committed, it will be recored in block 1 first(journal->j_tail is set to 1 in journal_reset). If emergency restart happens again before journal super block is updated unfortunately, the new recorded trans will not be replayed in the next mount.
The following steps describe this procedure in detail.
1. mount and touch some files
2. these transactions are committed to journal area but not checkpointed
3. emergency restart
4. mount again and its journals are replayed
5. journal super block's first s_start is 1, but its s_seq is not updated
6. touch a new file and its trans is committed but not checkpointed
7. emergency restart again
8. mount and journal is dirty, but trans committed in 6 will not be replayed.
This exception happens easily when this lun is used by only one node. If it is used by multi-nodes, other node will replay its journal and its journal super block will be updated after recovery like what this patch does.
ocfs2_recover_node->ocfs2_replay_journal.
The following jbd2 journal can be generated by touching a new file after journal is replayed, and seq 15 is the first valid commit, but first seq is 13 in journal super block.
logdump:
Block 0: Journal Superblock
Seq: 0 Type: 4 (JBD2_SUPERBLOCK_V2)
Blocksize: 4096 Total Blocks: 32768 First Block: 1
First Commit ID: 13 Start Log Blknum: 1
Error: 0
Feature Compat: 0
Feature Incompat: 2 block64
Feature RO compat: 0
Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36
FS Share Cnt: 1 Dynamic Superblk Blknum: 0
Per Txn Block Limit Journal: 0 Data: 0
Block 1: Journal Commit Block
Seq: 14 Type: 2 (JBD2_COMMIT_BLOCK)
Block 2: Journal Descriptor
Seq: 15 Type: 1 (JBD2_DESCRIPTOR_BLOCK)
No. Blocknum Flags
0. 587 none
UUID: 00000000000000000000000000000000
1. 8257792 JBD2_FLAG_SAME_UUID 2. 619 JBD2_FLAG_SAME_UUID 3. 24772864 JBD2_FLAG_SAME_UUID 4. 8257802 JBD2_FLAG_SAME_UUID 5. 513 JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG ... Block 7: Inode Inode: 8257802 Mode: 0640 Generation: 57157641 (0x3682809) FS Generation: 2839773110 (0xa9437fb6) CRC32: 00000000 ECC: 0000 Type: Regular Attr: 0x0 Flags: Valid Dynamic Features: (0x1) InlineData User: 0 (root) Group: 0 (root) Size: 7 Links: 1 Clusters: 0 ctime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019 atime: 0x5de5d870 0x113181a1 -- Tue Dec 3 11:37:20.288457121 2019 mtime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019
dtime: 0x0 -- Thu Jan 1 08:00:00 1970
...
Block 9: Journal Commit Block
Seq: 15 Type: 2 (JBD2_COMMIT_BLOCK)
The following is journal recovery log when recovering the upper jbd2 journal when mount again.
syslog:
ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it. fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0 fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1 fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2 fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13
Due to first commit seq 13 recorded in journal super is not consistent with the value recorded in block 1(seq is 14), journal recovery will be terminated before seq 15 even though it is an unbroken commit, inode 8257802 is a new file and it will be lost.
--- fs/ocfs2/journal.c | 8 ++++++++ 1 file changed, 8 insertions(+)
fs/ocfs2/journal.c +8 -0
@@ -1080,6 +1080,14 @@ int ocfs2_journal_load(struct ocfs2_journal *journal, int local, int replayed)ocfs2_clear_journal_error (osb->sb, journal->j_journal, osb->slot_num); +if (replayed) { +jbd2_journal_lock_updates (journal->j_journal); + status =jbd2_journal_flush (journal->j_journal); +jbd2_journal_unlock_updates (journal->j_journal); +if (status <0 ) +mlog_errno (status); + } + status =ocfs2_journal_toggle_dirty (osb,1 , replayed);if (status <0 ) {mlog_errno (status);
Signature · 1 line
2.20.1