Skip to contentSkip to conversation

5.4.12-stable review

PATCH In review Greg Kroah-Hartman 9 participants 107 messages Jan 14, 2020 – Feb 11, 2020

Subsystems (5)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.4.12-stable review

This is the start of the stable review cycle for the 5.4.12 release. There are 78 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 16 Jan 2020 09:41:58 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.12-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.4.12-rc1

Florian Westphal <[email protected]>
netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present

Florian Westphal <[email protected]>
netfilter: conntrack: dccp, sctp: handle null timeout argument

Florian Westphal <[email protected]>
netfilter: arp_tables: init netns pointer in xt_tgchk_param struct

Tony Lindgren <[email protected]>
phy: cpcap-usb: Fix flakey host idling and enumerating of devices

Tony Lindgren <[email protected]>
phy: cpcap-usb: Fix error path when no host driver is loaded

Alan Stern <[email protected]>
USB: Fix: Don't skip endpoint descriptors with maxpacket=0

Dmitry Torokhov <[email protected]>
HID: hiddev: fix mess in hiddev_open()

Navid Emamdoost <[email protected]>
ath10k: fix memory leak

Navid Emamdoost <[email protected]>
rtl8xxxu: prevent leaking urb

Navid Emamdoost <[email protected]>
scsi: bfa: release allocated memory in case of error

Navid Emamdoost <[email protected]>
rpmsg: char: release allocated memory

Navid Emamdoost <[email protected]>
mwifiex: pcie: Fix memory leak in mwifiex_pcie_alloc_cmdrsp_buf

Ganapathi Bhat <[email protected]>
mwifiex: fix possible heap overflow in mwifiex_process_country_ie()

Malcolm Priestley <[email protected]>
staging: vt6656: remove bool from vnt_radio_power_on ret

Amanieu d'Antras <[email protected]>
um: Implement copy_thread_tls

Amanieu d'Antras <[email protected]>
clone3: ensure copy_thread_tls is implemented

Amanieu d'Antras <[email protected]>
xtensa: Implement copy_thread_tls

Amanieu d'Antras <[email protected]>
riscv: Implement copy_thread_tls

Amanieu d'Antras <[email protected]>
parisc: Implement copy_thread_tls

Amanieu d'Antras <[email protected]>
arm: Implement copy_thread_tls

Amanieu d'Antras <[email protected]>
arm64: Implement copy_thread_tls

Amanieu d'Antras <[email protected]>
arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers

Sudip Mukherjee <[email protected]>
tty: always relink the port

Sudip Mukherjee <[email protected]>
tty: link tty and port before configuring it as console

Patrick Steinhardt <[email protected]>
iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU

Punit Agrawal <[email protected]>
serdev: Don't claim unsupported ACPI serial devices

Michael Straube <[email protected]>
staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21

Malcolm Priestley <[email protected]>
staging: vt6656: limit reg output to block size

Malcolm Priestley <[email protected]>
staging: vt6656: correct return of vnt_init_registers.

Ian Abbott <[email protected]>

    staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713

Paul Cercueil <[email protected]>
usb: musb: dma: Correct parameter passed to IRQ handler

Paul Cercueil <[email protected]>
usb: musb: Disable pullup at init

Tony Lindgren <[email protected]>
usb: musb: fix idling for suspend after disconnect interrupt

Daniele Palmas <[email protected]>

    USB: serial: option: add ZLP support for 0x1bc7/0x9010

Douglas Gilbert <[email protected]>
USB-PD tcpm: bad warning+size, PPS adapters

Colin Ian King <[email protected]>
usb: ohci-da8xx: ensure error return on variable error is set

Peter Chen <[email protected]>
usb: cdns3: should not use the same dev_id for shared interrupt handler

Malcolm Priestley <[email protected]>
staging: vt6656: Fix non zero logical return of, usb_control_msg

Malcolm Priestley <[email protected]>
staging: vt6656: set usb_set_intfdata on driver fail.

Kees Cook <[email protected]>
pstore/ram: Regularize prz label allocation lifetime

Hans de Goede <[email protected]>
gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism

Hans de Goede <[email protected]>
gpiolib: acpi: Turn dmi_system_id table into a generic quirk table

Oliver Hartkopp <[email protected]>
can: can_dropped_invalid_skb(): ensure an initialized headroom in outgoing CAN sk_buffs

Florian Faber <[email protected]>
can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling to irq mode

Sean Nyekjaer <[email protected]>
can: tcan4x5x: tcan4x5x_can_probe(): get the device out of standby before register access

Johan Hovold <[email protected]>
can: gs_usb: gs_usb_probe(): use descriptors of current altsetting

Johan Hovold <[email protected]>
can: kvaser_usb: fix interface sanity check

Kaike Wan <[email protected]>
IB/hfi1: Adjust flow PSN with the correct resync_psn

Chris Wilson <[email protected]>
drm/i915/gt: Mark up virtual engine uabi_instance

Matt Roper <[email protected]>

    drm/i915: Add Wa_1407352427:icl,ehl

Wayne Lin <[email protected]>
drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ

Geert Uytterhoeven <[email protected]>
drm/fb-helper: Round up bits_per_pixel if possible

Chen-Yu Tsai <[email protected]>
drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model

Alex Deucher <[email protected]>
Revert "drm/amdgpu: Set no-retry as default."

Chunming Zhou <[email protected]>
drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu

Matt Roper <[email protected]>

    drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl

Arnd Bergmann <[email protected]>
Input: input_event - fix struct padding on sparc64

Dmitry Torokhov <[email protected]>
Input: add safety guards to input_set_keycode()

Dmitry Torokhov <[email protected]>
HID: hid-input: clear unmapped usages

Marcel Holtmann <[email protected]>
HID: hidraw: Fix returning EPOLLOUT from hidraw_poll

Marcel Holtmann <[email protected]>
HID: uhid: Fix returning EPOLLOUT from uhid_char_poll

Alan Stern <[email protected]>
HID: Fix slab-out-of-bounds read in hid_field_extract

Joel Fernandes (Google) <[email protected]>
tracing: Change offset type to s32 in preempt/irq tracepoints

Steven Rostedt (VMware) <[email protected]>
tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined

Kaitao Cheng <[email protected]>
kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail

Chen-Yu Tsai <[email protected]>
rtc: sun6i: Add support for RTC clocks on R40

Tadeusz Struk <[email protected]>

    tpm: Handle negative priv->response_len in tpm_common_read()

Stefan Berger <[email protected]>
tpm: Revert "tpm_tis_core: Turn on the TPM before probing IRQ's"

Stefan Berger <[email protected]>
tpm: Revert "tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts"

Jarkko Sakkinen <[email protected]>
tpm: Revert "tpm_tis: reserve chip for duration of tpm_tis_core_init"

Kailang Yang <[email protected]>
ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen

Kailang Yang <[email protected]>
ALSA: hda/realtek - Set EAPD control to default for ALC222

Kailang Yang <[email protected]>
ALSA: hda/realtek - Add new codec supported for ALCS1200A

Takashi Iwai <[email protected]>
ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5

Guenter Roeck <[email protected]>
usb: chipidea: host: Disable port power only if previously enabled

Harry Pan <[email protected]>
powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online()

Russell King <[email protected]>
i2c: fix bus recovery stop mode timing

Will Deacon <[email protected]>
chardev: Avoid potential use-after-free in 'chrdev_open()'

-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/arm/Kconfig                                   |  1 +
 arch/arm/kernel/process.c                          |  6 +-
 arch/arm64/Kconfig                                 |  1 +
 arch/arm64/include/asm/unistd.h                    |  1 -
 arch/arm64/include/uapi/asm/unistd.h               |  1 +
 arch/arm64/kernel/process.c                        | 10 +--
 arch/parisc/Kconfig                                |  1 +
 arch/parisc/kernel/process.c                       |  8 +-
 arch/riscv/Kconfig                                 |  1 +
 arch/riscv/kernel/process.c                        |  6 +-
 arch/um/Kconfig                                    |  1 +
 arch/um/include/asm/ptrace-generic.h               |  2 +-
 arch/um/kernel/process.c                           |  6 +-
 arch/x86/um/tls_32.c                               |  6 +-
 arch/x86/um/tls_64.c                               |  7 +-
 arch/xtensa/Kconfig                                |  1 +
 arch/xtensa/kernel/process.c                       |  8 +-
 drivers/char/tpm/tpm-dev-common.c                  |  2 +-
 drivers/char/tpm/tpm-dev.h                         |  2 +-
 drivers/char/tpm/tpm_tis_core.c                    | 34 ++++----
 drivers/gpio/gpiolib-acpi.c                        | 51 ++++++++++--
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c            |  7 +-
 drivers/gpu/drm/drm_dp_mst_topology.c              |  2 +-
 drivers/gpu/drm/drm_fb_helper.c                    |  7 +-
 drivers/gpu/drm/i915/gt/intel_lrc.c                |  2 +
 drivers/gpu/drm/i915/i915_reg.h                    |  8 +-
 drivers/gpu/drm/i915/intel_pm.c                    | 11 +++
 drivers/gpu/drm/sun4i/sun4i_tcon.c                 | 15 +++-
 drivers/gpu/drm/sun4i/sun4i_tcon.h                 |  1 +
 drivers/hid/hid-core.c                             |  6 ++
 drivers/hid/hid-input.c                            | 16 +++-
 drivers/hid/hidraw.c                               |  4 +-
 drivers/hid/uhid.c                                 |  2 +-
 drivers/hid/usbhid/hiddev.c                        | 97 ++++++++++------------
 drivers/i2c/i2c-core-base.c                        | 13 ++-
 drivers/infiniband/hw/hfi1/tid_rdma.c              |  9 ++
 drivers/input/evdev.c                              | 14 ++--
 drivers/input/input.c                              | 26 +++---
 drivers/input/misc/uinput.c                        | 14 ++--
 drivers/iommu/intel-iommu.c                        |  9 +-
 drivers/net/can/m_can/tcan4x5x.c                   |  4 +
 drivers/net/can/mscan/mscan.c                      | 21 +++--
 drivers/net/can/usb/gs_usb.c                       |  4 +-
 drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c  |  2 +-
 drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c   |  2 +-
 drivers/net/wireless/ath/ath10k/usb.c              |  1 +
 drivers/net/wireless/marvell/mwifiex/pcie.c        |  4 +-
 drivers/net/wireless/marvell/mwifiex/sta_ioctl.c   | 13 ++-
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c  |  1 +
 drivers/phy/motorola/phy-cpcap-usb.c               | 35 ++++----
 drivers/powercap/intel_rapl_common.c               |  3 +
 drivers/rpmsg/rpmsg_char.c                         |  6 +-
 drivers/rtc/rtc-sun6i.c                            | 16 ++++
 drivers/scsi/bfa/bfad_attr.c                       |  4 +-
 drivers/staging/comedi/drivers/adv_pci1710.c       |  4 +-
 drivers/staging/rtl8188eu/os_dep/usb_intf.c        |  1 +
 drivers/staging/vt6656/baseband.c                  |  4 +-
 drivers/staging/vt6656/card.c                      |  2 +-
 drivers/staging/vt6656/device.h                    |  1 +
 drivers/staging/vt6656/main_usb.c                  |  3 +-
 drivers/staging/vt6656/usbpipe.c                   | 25 +++++-
 drivers/staging/vt6656/usbpipe.h                   |  5 ++
 drivers/staging/vt6656/wcmd.c                      |  1 +
 drivers/tty/serdev/core.c                          | 10 +++
 drivers/tty/serial/serial_core.c                   |  1 +
 drivers/usb/cdns3/gadget.c                         | 14 ++--
 drivers/usb/chipidea/host.c                        |  4 +-
 drivers/usb/core/config.c                          | 12 ++-
 drivers/usb/host/ohci-da8xx.c                      |  8 +-
 drivers/usb/musb/musb_core.c                       | 11 +++
 drivers/usb/musb/musbhsdma.c                       |  2 +-
 drivers/usb/serial/option.c                        |  8 ++
 drivers/usb/serial/usb-wwan.h                      |  1 +
 drivers/usb/serial/usb_wwan.c                      |  4 +
 drivers/usb/typec/tcpm/tcpci.c                     | 20 +++--
 fs/char_dev.c                                      |  2 +-
 fs/pstore/ram.c                                    |  4 +-
 fs/pstore/ram_core.c                               |  2 +-
 include/linux/can/dev.h                            | 34 ++++++++
 include/trace/events/preemptirq.h                  |  8 +-
 include/uapi/linux/input.h                         |  1 +
 kernel/fork.c                                      | 10 +++
 kernel/trace/trace_sched_wakeup.c                  |  4 +-
 kernel/trace/trace_stack.c                         |  5 ++
 net/ipv4/netfilter/arp_tables.c                    | 27 +++---
 net/netfilter/ipset/ip_set_core.c                  |  3 +-
 net/netfilter/nf_conntrack_proto_dccp.c            |  3 +
 net/netfilter/nf_conntrack_proto_sctp.c            |  3 +
 sound/pci/hda/patch_realtek.c                      |  5 ++
 sound/usb/quirks.c                                 |  1 +
 91 files changed, 547 insertions(+), 245 deletions(-)
author maintainer
#1 lore raw

PATCH 1/78 chardev: Avoid potential use-after-free in chrdev_open()

From: Will Deacon <[email protected]>

commit 68faa679b8be1a74e6663c21c3a9d25d32f1c079 upstream.

'chrdev_open()' calls 'cdev_get()' to obtain a reference to the 'struct cdev *' stashed in the 'i_cdev' field of the target inode structure. If the pointer is NULL, then it is initialised lazily by looking up the kobject in the 'cdev_map' and so the whole procedure is protected by the 'cdev_lock' spinlock to serialise initialisation of the shared pointer.

Unfortunately, it is possible for the initialising thread to fail *after* installing the new pointer, for example if the subsequent '->open()' call on the file fails. In this case, 'cdev_put()' is called, the reference count on the kobject is dropped and, if nobody else has taken a reference, the release function is called which finally clears 'inode->i_cdev' from 'cdev_purge()' before potentially freeing the object. The problem here is that a racing thread can happily take the 'cdev_lock' and see the non-NULL pointer in the inode, which can result in a refcount increment from zero and a warning:

  |  ------------[ cut here ]------------
  |  refcount_t: addition on 0; use-after-free.
  |  WARNING: CPU: 2 PID: 6385 at lib/refcount.c:25 refcount_warn_saturate+0x6d/0xf0
  |  Modules linked in:
  |  CPU: 2 PID: 6385 Comm: repro Not tainted 5.5.0-rc2+ #22
  |  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  |  RIP: 0010:refcount_warn_saturate+0x6d/0xf0
  |  Code: 05 55 9a 15 01 01 e8 9d aa c8 ff 0f 0b c3 80 3d 45 9a 15 01 00 75 ce 48 c7 c7 00 9c 62 b3 c6 08
  |  RSP: 0018:ffffb524c1b9bc70 EFLAGS: 00010282
  |  RAX: 0000000000000000 RBX: ffff9e9da1f71390 RCX: 0000000000000000
  |  RDX: ffff9e9dbbd27618 RSI: ffff9e9dbbd18798 RDI: ffff9e9dbbd18798
  |  RBP: 0000000000000000 R08: 000000000000095f R09: 0000000000000039
  |  R10: 0000000000000000 R11: ffffb524c1b9bb20 R12: ffff9e9da1e8c700
  |  R13: ffffffffb25ee8b0 R14: 0000000000000000 R15: ffff9e9da1e8c700
  |  FS:  00007f3b87d26700(0000) GS:ffff9e9dbbd00000(0000) knlGS:0000000000000000
  |  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  |  CR2: 00007fc16909c000 CR3: 000000012df9c000 CR4: 00000000000006e0
  |  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  |  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  |  Call Trace:
  |   kobject_get+0x5c/0x60
  |   cdev_get+0x2b/0x60
  |   chrdev_open+0x55/0x220
  |   ? cdev_put.part.3+0x20/0x20
  |   do_dentry_open+0x13a/0x390
  |   path_openat+0x2c8/0x1470
  |   do_filp_open+0x93/0x100
  |   ? selinux_file_ioctl+0x17f/0x220
  |   do_sys_open+0x186/0x220
  |   do_syscall_64+0x48/0x150
  |   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  |  RIP: 0033:0x7f3b87efcd0e
  |  Code: 89 54 24 08 e8 a3 f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f4
  |  RSP: 002b:00007f3b87d259f0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
  |  RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b87efcd0e
  |  RDX: 0000000000000000 RSI: 00007f3b87d25a80 RDI: 00000000ffffff9c
  |  RBP: 00007f3b87d25e90 R08: 0000000000000000 R09: 0000000000000000
  |  R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe188f504e
  |  R13: 00007ffe188f504f R14: 00007f3b87d26700 R15: 0000000000000000
  |  ---[ end trace 24f53ca58db8180a ]---

Since 'cdev_get()' can already fail to obtain a reference, simply move it over to use 'kobject_get_unless_zero()' instead of 'kobject_get()', which will cause the racing thread to return -ENXIO if the initialising thread fails unexpectedly.

---
 fs/char_dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/char_dev.c +1 -1
@@ -352,7 +352,7 @@ static struct kobject *cdev_get(struct c
 
 	if (owner && !try_module_get(owner))
 		return NULL;
-	kobj = kobject_get(&p->kobj);
+	kobj = kobject_get_unless_zero(&p->kobj);
 	if (!kobj)
 		module_put(owner);
 	return kobj;
author maintainer
#2 lore raw

PATCH 2/78 i2c: fix bus recovery stop mode timing

In reply to Greg Kroah-Hartman

From: Russell King <[email protected]>

commit cf8ce8b80f8bf9669f6ec4e71e16668430febdac upstream.

The I2C specification states that tsu:sto for standard mode timing must be at minimum 4us. Pictographically, this is:

SCL: ____/~~~~~~~~~
SDA: _________/~~~~

       ->|    |<- 4us minimum

We are currently waiting 2.5us between asserting SCL and SDA, which is in violation of the standard. Adjust the timings to ensure that we meet what is stipulated as the minimum timings to ensure that all devices correctly interpret the STOP bus transition.

This is more important than trying to generate a square wave with even duty cycle.

---
 drivers/i2c/i2c-core-base.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
drivers/i2c/i2c-core-base.c +10 -3
@@ -186,10 +186,11 @@ int i2c_generic_scl_recovery(struct i2c_
 	 * If we can set SDA, we will always create a STOP to ensure additional
 	 * pulses will do no harm. This is achieved by letting SDA follow SCL
 	 * half a cycle later. Check the 'incomplete_write_byte' fault injector
-	 * for details.
+	 * for details. Note that we must honour tsu:sto, 4us, but lets use 5us
+	 * here for simplicity.
 	 */
 	bri->set_scl(adap, scl);
-	ndelay(RECOVERY_NDELAY / 2);
+	ndelay(RECOVERY_NDELAY);
 	if (bri->set_sda)
 		bri->set_sda(adap, scl);
 	ndelay(RECOVERY_NDELAY / 2);
@@ -211,7 +212,13 @@ int i2c_generic_scl_recovery(struct i2c_
 		scl = !scl;
 		bri->set_scl(adap, scl);
 		/* Creating STOP again, see above */
-		ndelay(RECOVERY_NDELAY / 2);
+		if (scl)  {
+			/* Honour minimum tsu:sto */
+			ndelay(RECOVERY_NDELAY);
+		} else {
+			/* Honour minimum tf and thd:dat */
+			ndelay(RECOVERY_NDELAY / 2);
+		}
 		if (bri->set_sda)
 			bri->set_sda(adap, scl);
 		ndelay(RECOVERY_NDELAY / 2);
author maintainer
#3 lore raw

PATCH 3/78 powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online()

In reply to Greg Kroah-Hartman

From: Harry Pan <[email protected]>

commit 3aa3c5882e4fb2274448908aaed605a3ed7dd15d upstream.

RAPL MMIO support depends on the RAPL common driver. During CPU initialization rapl_mmio_cpu_online() is called via CPU hotplug to initialize the MMIO RAPL for the new CPU, but if that CPU is not present in the common RAPL driver's support list, rapl_defaults is NULL and the kernel crashes on an attempt to dereference it:

[    4.188566] BUG: kernel NULL pointer dereference, address: 0000000000000020
...snip...
[    4.189555] RIP: 0010:rapl_add_package+0x223/0x574
[    4.189555] Code: b5 a0 31 c0 49 8b 4d 78 48 01 d9 48 8b 0c c1 49 89 4c c6 10 48 ff c0 48 83 f8 05 75 e7 49 83 ff 03 75 15 48 8b 05 09 bc 18 01 <8b> 70 20 41 89 b6 0c 05 00 00 85 f6 75 1a 49 81 c6 18 9
[    4.189555] RSP: 0000:ffffb3adc00b3d90 EFLAGS: 00010246
[    4.189555] RAX: 0000000000000000 RBX: 0000000000000098 RCX: 0000000000000000
[    4.267161] usb 1-1: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0
[    4.189555] RDX: 0000000000001000 RSI: 0000000000000000 RDI: ffff9340caafd000
[    4.189555] RBP: ffffb3adc00b3df8 R08: ffffffffa0246e28 R09: ffff9340caafc000
[    4.189555] R10: 000000000000024a R11: ffffffff9ff1f6f2 R12: 00000000ffffffed
[    4.189555] R13: ffff9340caa94800 R14: ffff9340caafc518 R15: 0000000000000003
[    4.189555] FS:  0000000000000000(0000) GS:ffff9340ce200000(0000) knlGS:0000000000000000
[    4.189555] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    4.189555] CR2: 0000000000000020 CR3: 0000000302c14001 CR4: 00000000003606f0
[    4.189555] Call Trace:
[    4.189555]  ? __switch_to_asm+0x40/0x70
[    4.189555]  rapl_mmio_cpu_online+0x47/0x64
[    4.189555]  ? rapl_mmio_write_raw+0x33/0x33
[    4.281059] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.189555]  cpuhp_invoke_callback+0x29f/0x66f
[    4.189555]  ? __schedule+0x46d/0x6a0
[    4.189555]  cpuhp_thread_fun+0xb9/0x11c
[    4.189555]  smpboot_thread_fn+0x17d/0x22f
[    4.297006] usb 1-1: Product: USB2.0 Hub
[    4.189555]  ? cpu_report_death+0x43/0x43
[    4.189555]  kthread+0x137/0x13f
[    4.189555]  ? cpu_report_death+0x43/0x43
[    4.189555]  ? kthread_blkcg+0x2e/0x2e
[    4.312951] usb 1-1: Manufacturer: VIA Labs, Inc.
[    4.189555]  ret_from_fork+0x1f/0x40
[    4.189555] Modules linked in:
[    4.189555] CR2: 0000000000000020
[    4.189555] ---[ end trace 01bb812aabc791f4 ]---

To avoid that problem, check rapl_defaults NULL upfront and return an error code if it is NULL. [Note that it does not make sense to even try to allocate memory in that case, because it is not going to be used anyway.]

Fixes 555c45fe0d04 ("int340X/processor_thermal_device: add support for MMIO RAPL")
Cc 5.3+ <[email protected]> # 5.3+
[ rjw: Subject & changelog ]
---
 drivers/powercap/intel_rapl_common.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/powercap/intel_rapl_common.c +3 -0
@@ -1293,6 +1293,9 @@ struct rapl_package *rapl_add_package(in
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	int ret;
 
+	if (!rapl_defaults)
+		return ERR_PTR(-ENODEV);
+
 	rp = kzalloc(sizeof(struct rapl_package), GFP_KERNEL);
 	if (!rp)
 		return ERR_PTR(-ENOMEM);
author maintainer
#4 lore raw

PATCH 4/78 usb: chipidea: host: Disable port power only if previously enabled

In reply to Greg Kroah-Hartman

From: Guenter Roeck <[email protected]>

commit c1ffba305dbcf3fb9ca969c20a97acbddc38f8e9 upstream.

On shutdown, ehci_power_off() is called unconditionally to power off each port, even if it was never called to power on the port. For chipidea, this results in a call to ehci_ci_portpower() with a request to power off ports even if the port was never powered on.
This results in the following warning from the regulator code.

WARNING: CPU: 0 PID: 182 at drivers/regulator/core.c:2596 _regulator_disable+0x1a8/0x210
unbalanced disables for usb_otg2_vbus
Modules linked in:
CPU: 0 PID: 182 Comm: init Not tainted 5.4.6 #1
Hardware name: Freescale i.MX7 Dual (Device Tree)
[<c0313658>] (unwind_backtrace) from [<c030d698>] (show_stack+0x10/0x14)
[<c030d698>] (show_stack) from [<c1133afc>] (dump_stack+0xe0/0x10c)
[<c1133afc>] (dump_stack) from [<c0349098>] (__warn+0xf4/0x10c)
[<c0349098>] (__warn) from [<c0349128>] (warn_slowpath_fmt+0x78/0xbc)
[<c0349128>] (warn_slowpath_fmt) from [<c09f36ac>] (_regulator_disable+0x1a8/0x210)
[<c09f36ac>] (_regulator_disable) from [<c09f374c>] (regulator_disable+0x38/0xe8)
[<c09f374c>] (regulator_disable) from [<c0df7bac>] (ehci_ci_portpower+0x38/0xdc)
[<c0df7bac>] (ehci_ci_portpower) from [<c0db4fa4>] (ehci_port_power+0x50/0xa4)
[<c0db4fa4>] (ehci_port_power) from [<c0db5420>] (ehci_silence_controller+0x5c/0xc4)
[<c0db5420>] (ehci_silence_controller) from [<c0db7644>] (ehci_stop+0x3c/0xcc)
[<c0db7644>] (ehci_stop) from [<c0d5bdc4>] (usb_remove_hcd+0xe0/0x19c)
[<c0d5bdc4>] (usb_remove_hcd) from [<c0df7638>] (host_stop+0x38/0xa8)
[<c0df7638>] (host_stop) from [<c0df2f34>] (ci_hdrc_remove+0x44/0xe4)

...

Keeping track of the power enable state avoids the warning and traceback.

Fixes c8679a2fb8dec ("usb: chipidea: host: add portpower override")
Cc Michael Grzeschik <[email protected]>
Cc Peter Chen <[email protected]>
---
 drivers/usb/chipidea/host.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/chipidea/host.c +3 -1
@@ -26,6 +26,7 @@ static int (*orig_bus_suspend)(struct us
 
 struct ehci_ci_priv {
 	struct regulator *reg_vbus;
+	bool enabled;
 };
 
 static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
@@ -37,7 +38,7 @@ static int ehci_ci_portpower(struct usb_
 	int ret = 0;
 	int port = HCS_N_PORTS(ehci->hcs_params);
 
-	if (priv->reg_vbus) {
+	if (priv->reg_vbus && enable != priv->enabled) {
 		if (port > 1) {
 			dev_warn(dev,
 				"Not support multi-port regulator control\n");
@@ -53,6 +54,7 @@ static int ehci_ci_portpower(struct usb_
 				enable ? "enable" : "disable", ret);
 			return ret;
 		}
+		priv->enabled = enable;
 	}
 
 	if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
author maintainer
#5 lore raw

PATCH 5/78 ALSA: usb-audio: Apply the sample rate quirk for Bose Companion 5

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit 51d4efab7865e6ea6a4ebcd25b3f03c019515c4c upstream.

Bose Companion 5 (with USB ID 05a7:1020) doesn't seem supporting reading back the sample rate, so the existing quirk is needed.

---
 sound/usb/quirks.c |    1 +
 1 file changed, 1 insertion(+)
sound/usb/quirks.c +1 -0
@@ -1397,6 +1397,7 @@ bool snd_usb_get_sample_rate_quirk(struc
 	case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */
 	case USB_ID(0x0556, 0x0014): /* Phoenix Audio TMX320VC */
 	case USB_ID(0x05A3, 0x9420): /* ELP HD USB Camera */
+	case USB_ID(0x05a7, 0x1020): /* Bose Companion 5 */
 	case USB_ID(0x074D, 0x3553): /* Outlaw RR2150 (Micronas UAC3553B) */
 	case USB_ID(0x1395, 0x740a): /* Sennheiser DECT */
 	case USB_ID(0x1901, 0x0191): /* GE B850V3 CP2114 audio interface */
author maintainer
#6 lore raw

PATCH 6/78 ALSA: hda/realtek - Add new codec supported for ALCS1200A

In reply to Greg Kroah-Hartman

From: Kailang Yang <[email protected]>

commit 6d9ffcff646bbd0ede6c2a59f4cd28414ecec6e0 upstream.

Add ALCS1200A supported.
It was similar as ALC900.

---
 sound/pci/hda/patch_realtek.c |    3 +++
 1 file changed, 3 insertions(+)
sound/pci/hda/patch_realtek.c +3 -0
@@ -430,6 +430,7 @@ static void alc_fill_eapd_coef(struct hd
 		break;
 	case 0x10ec0899:
 	case 0x10ec0900:
+	case 0x10ec0b00:
 	case 0x10ec1168:
 	case 0x10ec1220:
 		alc_update_coef_idx(codec, 0x7, 1<<1, 0);
@@ -2526,6 +2527,7 @@ static int patch_alc882(struct hda_codec
 	case 0x10ec0882:
 	case 0x10ec0885:
 	case 0x10ec0900:
+	case 0x10ec0b00:
 	case 0x10ec1220:
 		break;
 	default:
@@ -9295,6 +9297,7 @@ static const struct hda_device_id snd_hd
 	HDA_CODEC_ENTRY(0x10ec0892, "ALC892", patch_alc662),
 	HDA_CODEC_ENTRY(0x10ec0899, "ALC898", patch_alc882),
 	HDA_CODEC_ENTRY(0x10ec0900, "ALC1150", patch_alc882),
+	HDA_CODEC_ENTRY(0x10ec0b00, "ALCS1200A", patch_alc882),
 	HDA_CODEC_ENTRY(0x10ec1168, "ALC1220", patch_alc882),
 	HDA_CODEC_ENTRY(0x10ec1220, "ALC1220", patch_alc882),
 	{} /* terminator */
author maintainer
#7 lore raw

PATCH 7/78 ALSA: hda/realtek - Set EAPD control to default for ALC222

In reply to Greg Kroah-Hartman

From: Kailang Yang <[email protected]>

commit 9194a1ebbc56d7006835e2b4cacad301201fb832 upstream.

Set EAPD control to verb control.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -412,6 +412,7 @@ static void alc_fill_eapd_coef(struct hd
 	case 0x10ec0672:
 		alc_update_coef_idx(codec, 0xd, 0, 1<<14); /* EAPD Ctrl */
 		break;
+	case 0x10ec0222:
 	case 0x10ec0623:
 		alc_update_coef_idx(codec, 0x19, 1<<13, 0);
 		break;
author maintainer
#8 lore raw

PATCH 8/78 ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen

In reply to Greg Kroah-Hartman

From: Kailang Yang <[email protected]>

commit 54a6a7dc107da0492a9e84fd7e9a107b3c58138d upstream.

Add quirk to ALC285_FIXUP_SPEAKER2_TO_DAC1, which is the same fixup applied for X1 Carbon 7th gen in commit d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen").

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -7260,6 +7260,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x17aa, 0x224c, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
 	SND_PCI_QUIRK(0x17aa, 0x224d, "Thinkpad", ALC298_FIXUP_TPT470_DOCK),
 	SND_PCI_QUIRK(0x17aa, 0x225d, "Thinkpad T480", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
+	SND_PCI_QUIRK(0x17aa, 0x2292, "Thinkpad X1 Yoga 7th", ALC285_FIXUP_SPEAKER2_TO_DAC1),
 	SND_PCI_QUIRK(0x17aa, 0x2293, "Thinkpad X1 Carbon 7th", ALC285_FIXUP_SPEAKER2_TO_DAC1),
 	SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
 	SND_PCI_QUIRK(0x17aa, 0x30e2, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
author maintainer
#9 lore raw

PATCH 9/78 tpm: Revert "tpm_tis: reserve chip for duration of tpm_tis_core_init"

In reply to Greg Kroah-Hartman

From: Jarkko Sakkinen <[email protected]>

commit 9550f210492c6f88415709002f42a9d15c0e6231 upstream.

Revert a commit, which was included in Linux v5.5-rc3 because it did not properly fix the issues it was supposed to fix.

Fixes 21df4a8b6018 ("tpm_tis: reserve chip for duration of tpm_tis_core_init")
Cc Jerry Snitselaar <[email protected]>
Cc Dan Williams <[email protected]>
---
 drivers/char/tpm/tpm_tis_core.c |   35 +++++++++++++++++------------------
 1 file changed, 17 insertions(+), 18 deletions(-)
drivers/char/tpm/tpm_tis_core.c +17 -18
@@ -899,13 +899,13 @@ int tpm_tis_core_init(struct device *dev
 
 	if (wait_startup(chip, 0) != 0) {
 		rc = -ENODEV;
-		goto err_start;
+		goto out_err;
 	}
 
 	/* Take control of the TPM's interrupt hardware and shut it off */
 	rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
 	if (rc < 0)
-		goto err_start;
+		goto out_err;
 
 	intmask |= TPM_INTF_CMD_READY_INT | TPM_INTF_LOCALITY_CHANGE_INT |
 		   TPM_INTF_DATA_AVAIL_INT | TPM_INTF_STS_VALID_INT;
@@ -914,21 +914,21 @@ int tpm_tis_core_init(struct device *dev
 
 	rc = tpm_chip_start(chip);
 	if (rc)
-		goto err_start;
-
+		goto out_err;
 	rc = tpm2_probe(chip);
+	tpm_chip_stop(chip);
 	if (rc)
-		goto err_probe;
+		goto out_err;
 
 	rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor);
 	if (rc < 0)
-		goto err_probe;
+		goto out_err;
 
 	priv->manufacturer_id = vendor;
 
 	rc = tpm_tis_read8(priv, TPM_RID(0), &rid);
 	if (rc < 0)
-		goto err_probe;
+		goto out_err;
 
 	dev_info(dev, "%s TPM (device-id 0x%X, rev-id %d)\n",
 		 (chip->flags & TPM_CHIP_FLAG_TPM2) ? "2.0" : "1.2",
@@ -937,13 +937,13 @@ int tpm_tis_core_init(struct device *dev
 	probe = probe_itpm(chip);
 	if (probe < 0) {
 		rc = -ENODEV;
-		goto err_probe;
+		goto out_err;
 	}
 
 	/* Figure out the capabilities */
 	rc = tpm_tis_read32(priv, TPM_INTF_CAPS(priv->locality), &intfcaps);
 	if (rc < 0)
-		goto err_probe;
+		goto out_err;
 
 	dev_dbg(dev, "TPM interface capabilities (0x%x):\n",
 		intfcaps);
@@ -977,9 +977,10 @@ int tpm_tis_core_init(struct device *dev
 		if (tpm_get_timeouts(chip)) {
 			dev_err(dev, "Could not get TPM timeouts and durations\n");
 			rc = -ENODEV;
-			goto err_probe;
+			goto out_err;
 		}
 
+		tpm_chip_start(chip);
 		chip->flags |= TPM_CHIP_FLAG_IRQ;
 		if (irq) {
 			tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
@@ -990,20 +991,18 @@ int tpm_tis_core_init(struct device *dev
 		} else {
 			tpm_tis_probe_irq(chip, intmask);
 		}
+		tpm_chip_stop(chip);
 	}
 
-	tpm_chip_stop(chip);
-
 	rc = tpm_chip_register(chip);
 	if (rc)
-		goto err_start;
+		goto out_err;
 
-	return 0;
-
-err_probe:
-	tpm_chip_stop(chip);
+	if (chip->ops->clk_enable != NULL)
+		chip->ops->clk_enable(chip, false);
 
-err_start:
+	return 0;
+out_err:
 	if ((chip->ops != NULL) && (chip->ops->clk_enable != NULL))
 		chip->ops->clk_enable(chip, false);
 
author maintainer
#10 lore raw

PATCH 10/78 tpm: Revert "tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts"

In reply to Greg Kroah-Hartman

From: Stefan Berger <[email protected]>

commit dda8b2af395b2ed508e2ef314ae32e122841b447 upstream.

There has been a bunch of reports (one from kernel bugzilla linked) reporting that when this commit is applied it causes on some machines boot freezes.

Unfortunately hardware where this commit causes a failure is not widely available (only one I'm aware is Lenovo T490), which means we cannot predict yet how long it will take to properly fix tpm_tis interrupt probing.

Thus, the least worst short term action is to revert the code to the state before this commit. In long term we need fix the tpm_tis probing code to work on machines that Stefan's fix was supposed to fix.

---
 drivers/char/tpm/tpm_tis_core.c |    1 -
 1 file changed, 1 deletion(-)
drivers/char/tpm/tpm_tis_core.c +0 -1
@@ -981,7 +981,6 @@ int tpm_tis_core_init(struct device *dev
 		}
 
 		tpm_chip_start(chip);
-		chip->flags |= TPM_CHIP_FLAG_IRQ;
 		if (irq) {
 			tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
 						 irq);
author maintainer
#11 lore raw

PATCH 11/78 tpm: Revert "tpm_tis_core: Turn on the TPM before probing IRQs"

In reply to Greg Kroah-Hartman

From: Stefan Berger <[email protected]>

commit aa4a63dd981682b1742baa01237036e48bc11923 upstream.

There has been a bunch of reports (one from kernel bugzilla linked) reporting that when this commit is applied it causes on some machines boot freezes.

Unfortunately hardware where this commit causes a failure is not widely available (only one I'm aware is Lenovo T490), which means we cannot predict yet how long it will take to properly fix tpm_tis interrupt probing.

Thus, the least worst short term action is to revert the code to the state before this commit. In long term we need fix the tpm_tis probing code to work on machines that Stefan's fix was supposed to fix.

---
 drivers/char/tpm/tpm_tis_core.c |    2 --
 1 file changed, 2 deletions(-)
drivers/char/tpm/tpm_tis_core.c +0 -2
@@ -980,7 +980,6 @@ int tpm_tis_core_init(struct device *dev
 			goto out_err;
 		}
 
-		tpm_chip_start(chip);
 		if (irq) {
 			tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
 						 irq);
@@ -990,7 +989,6 @@ int tpm_tis_core_init(struct device *dev
 		} else {
 			tpm_tis_probe_irq(chip, intmask);
 		}
-		tpm_chip_stop(chip);
 	}
 
 	rc = tpm_chip_register(chip);
author maintainer
#12 lore raw

PATCH 12/78 tpm: Handle negative priv->response_len in tpm_common_read()

In reply to Greg Kroah-Hartman

From: Tadeusz Struk <[email protected]>

commit a430e67d9a2c62a8c7b315b99e74de02018d0a96 upstream.

The priv->response_length can hold the size of an response or an negative error code, and the tpm_common_read() needs to handle both cases correctly. Changed the type of response_length to signed and accounted for negative value in tpm_common_read().

Fixes d23d12484307 ("tpm: fix invalid locking in NONBLOCKING mode")
---
 drivers/char/tpm/tpm-dev-common.c |    2 +-
 drivers/char/tpm/tpm-dev.h        |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/char/tpm/tpm-dev-common.c +1 -1
@@ -130,7 +130,7 @@ ssize_t tpm_common_read(struct file *fil
 		priv->response_read = true;
 
 		ret_size = min_t(ssize_t, size, priv->response_length);
-		if (!ret_size) {
+		if (ret_size <= 0) {
 			priv->response_length = 0;
 			goto out;
 		}
drivers/char/tpm/tpm-dev.h +1 -1
@@ -14,7 +14,7 @@ struct file_priv {
 	struct work_struct timeout_work;
 	struct work_struct async_work;
 	wait_queue_head_t async_wait;
-	size_t response_length;
+	ssize_t response_length;
 	bool response_read;
 	bool command_enqueued;
 
author maintainer
#13 lore raw

PATCH 13/78 rtc: sun6i: Add support for RTC clocks on R40

In reply to Greg Kroah-Hartman

From: Chen-Yu Tsai <[email protected]>

commit 111bf02b8f544f98de53ea1f912ae01f598b161b upstream.

When support for the R40 in the rtc-sun6i driver was split out for a separate compatible string, only the RTC half was covered, and not the clock half. Unfortunately this results in the whole driver not working, as the RTC half expects the clock half to have been initialized.

Add support for the clock part as well. The clock part is like the H3, but does not need to export the internal oscillator, nor does it have a gateable LOSC external output.

This fixes issues with WiFi and Bluetooth not working on the BPI M2U.

---
 drivers/rtc/rtc-sun6i.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)
drivers/rtc/rtc-sun6i.c +16 -0
@@ -380,6 +380,22 @@ static void __init sun50i_h6_rtc_clk_ini
 CLK_OF_DECLARE_DRIVER(sun50i_h6_rtc_clk, "allwinner,sun50i-h6-rtc",
 		      sun50i_h6_rtc_clk_init);
 
+/*
+ * The R40 user manual is self-conflicting on whether the prescaler is
+ * fixed or configurable. The clock diagram shows it as fixed, but there
+ * is also a configurable divider in the RTC block.
+ */
+static const struct sun6i_rtc_clk_data sun8i_r40_rtc_data = {
+	.rc_osc_rate = 16000000,
+	.fixed_prescaler = 512,
+};
+static void __init sun8i_r40_rtc_clk_init(struct device_node *node)
+{
+	sun6i_rtc_clk_init(node, &sun8i_r40_rtc_data);
+}
+CLK_OF_DECLARE_DRIVER(sun8i_r40_rtc_clk, "allwinner,sun8i-r40-rtc",
+		      sun8i_r40_rtc_clk_init);
+
 static const struct sun6i_rtc_clk_data sun8i_v3_rtc_data = {
 	.rc_osc_rate = 32000,
 	.has_out_clk = 1,
author maintainer
#14 lore raw

PATCH 14/78 kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail

In reply to Greg Kroah-Hartman

From: Kaitao Cheng <[email protected]>

commit 50f9ad607ea891a9308e67b81f774c71736d1098 upstream.

In the function, if register_trace_sched_migrate_task() returns error, sched_switch/sched_wakeup_new/sched_wakeup won't unregister. That is why fail_deprobe_sched_switch was added.

Fixes 478142c39c8c2 ("tracing: do not grab lock in wakeup latency function tracing")
---
 kernel/trace/trace_sched_wakeup.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
kernel/trace/trace_sched_wakeup.c +3 -1
@@ -630,7 +630,7 @@ static void start_wakeup_tracer(struct t
 	if (ret) {
 		pr_info("wakeup trace: Couldn't activate tracepoint"
 			" probe to kernel_sched_migrate_task\n");
-		return;
+		goto fail_deprobe_sched_switch;
 	}
 
 	wakeup_reset(tr);
@@ -648,6 +648,8 @@ static void start_wakeup_tracer(struct t
 		printk(KERN_ERR "failed to start wakeup tracer\n");
 
 	return;
+fail_deprobe_sched_switch:
+	unregister_trace_sched_switch(probe_wakeup_sched_switch, NULL);
 fail_deprobe_wake_new:
 	unregister_trace_sched_wakeup_new(probe_wakeup, NULL);
 fail_deprobe:
author maintainer
#15 lore raw

PATCH 15/78 tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined

In reply to Greg Kroah-Hartman

From: Steven Rostedt (VMware) <[email protected]>

commit b8299d362d0837ae39e87e9019ebe6b736e0f035 upstream.

On some archs with some configurations, MCOUNT_INSN_SIZE is not defined, and this makes the stack tracer fail to compile. Just define it to zero in this case.

Fixes 4df297129f622 ("tracing: Remove most or all of stack tracer stack size from stack_max_size")
---
 kernel/trace/trace_stack.c |    5 +++++
 1 file changed, 5 insertions(+)
kernel/trace/trace_stack.c +5 -0
@@ -283,6 +283,11 @@ static void check_stack(unsigned long ip
 	local_irq_restore(flags);
 }
 
+/* Some archs may not define MCOUNT_INSN_SIZE */
+#ifndef MCOUNT_INSN_SIZE
+# define MCOUNT_INSN_SIZE 0
+#endif
+
 static void
 stack_trace_call(unsigned long ip, unsigned long parent_ip,
 		 struct ftrace_ops *op, struct pt_regs *pt_regs)
author maintainer
#16 lore raw

PATCH 16/78 tracing: Change offset type to s32 in preempt/irq tracepoints

In reply to Greg Kroah-Hartman

From: Joel Fernandes (Google) <[email protected]>

commit bf44f488e168368cae4139b4b33c3d0aaa11679c upstream.

Discussion in the below link reported that symbols in modules can appear to be before _stext on ARM architecture, causing wrapping with the offsets of this tracepoint. Change the offset type to s32 to fix this.

Cc Bjorn Helgaas <[email protected]>
Cc David Sterba <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Mike Rapoport <[email protected]>
Cc "Rafael J. Wysocki" <[email protected]>
Cc Sakari Ailus <[email protected]>
Cc Antonio Borneo <[email protected]>
Fixes d59158162e032 ("tracing: Add support for preempt and irq enable/disable events")
---
 include/trace/events/preemptirq.h |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
include/trace/events/preemptirq.h +4 -4
@@ -18,13 +18,13 @@ DECLARE_EVENT_CLASS(preemptirq_template,
 	TP_ARGS(ip, parent_ip),
 
 	TP_STRUCT__entry(
-		__field(u32, caller_offs)
-		__field(u32, parent_offs)
+		__field(s32, caller_offs)
+		__field(s32, parent_offs)
 	),
 
 	TP_fast_assign(
-		__entry->caller_offs = (u32)(ip - (unsigned long)_stext);
-		__entry->parent_offs = (u32)(parent_ip - (unsigned long)_stext);
+		__entry->caller_offs = (s32)(ip - (unsigned long)_stext);
+		__entry->parent_offs = (s32)(parent_ip - (unsigned long)_stext);
 	),
 
 	TP_printk("caller=%pS parent=%pS",
author maintainer
#17 lore raw

PATCH 17/78 HID: Fix slab-out-of-bounds read in hid_field_extract

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit 8ec321e96e056de84022c032ffea253431a83c3c upstream.

The syzbot fuzzer found a slab-out-of-bounds bug in the HID report handler. The bug was caused by a report descriptor which included a field with size 12 bits and count 4899, for a total size of 7349 bytes.

The usbhid driver uses at most a single-page 4-KB buffer for reports. In the test there wasn't any problem about overflowing the buffer, since only one byte was received from the device. Rather, the bug occurred when the HID core tried to extract the data from the report fields, which caused it to try reading data beyond the end of the allocated buffer.

This patch fixes the problem by rejecting any report whose total length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow for a possible report index). In theory a device could have a report longer than that, but if there was such a thing we wouldn't handle it correctly anyway.

---
 drivers/hid/hid-core.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/hid/hid-core.c +6 -0
@@ -288,6 +288,12 @@ static int hid_add_field(struct hid_pars
 	offset = report->size;
 	report->size += parser->global.report_size * parser->global.report_count;
 
+	/* Total size check: Allow for possible report index byte */
+	if (report->size > (HID_MAX_BUFFER_SIZE - 1) << 3) {
+		hid_err(parser->device, "report is too long\n");
+		return -1;
+	}
+
 	if (!parser->local.usage_index) /* Ignore padding fields */
 		return 0;
 
#18 lore raw

Re: [PATCH 5.4 17/78] HID: Fix slab-out-of-bounds read in hid_field_extract (Broken!)

Quoted 40 lines · Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit 8ec321e96e056de84022c032ffea253431a83c3c upstream.

The syzbot fuzzer found a slab-out-of-bounds bug in the HID report handler. The bug was caused by a report descriptor which included a field with size 12 bits and count 4899, for a total size of 7349 bytes.

The usbhid driver uses at most a single-page 4-KB buffer for reports. In the test there wasn't any problem about overflowing the buffer, since only one byte was received from the device. Rather, the bug occurred when the HID core tried to extract the data from the report fields, which caused it to try reading data beyond the end of the allocated buffer.

This patch fixes the problem by rejecting any report whose total length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow for a possible report index). In theory a device could have a report longer than that, but if there was such a thing we wouldn't handle it correctly anyway.

---
 drivers/hid/hid-core.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/hid/hid-core.c +0 -0
@@ -288,6 +288,12 @@ static int hid_add_field(struct hid_pars
 	offset = report->size;
 	report->size += parser->global.report_size * parser->global.report_count;

drivers/hid/hid-core.c static int hid_add_field(struct hid_pars · line 299

Quoted 10 lines
drivers/hid/hid-core.c +6 -0
 
+	/* Total size check: Allow for possible report index byte */
+	if (report->size > (HID_MAX_BUFFER_SIZE - 1) << 3) {
+		hid_err(parser->device, "report is too long\n");
+		return -1;
+	}
+
 	if (!parser->local.usage_index) /* Ignore padding fields */
 		return 0;
 

This patch breaks Elgato StreamDeck.

author maintainer
#19 lore raw

Re: [PATCH 5.4 17/78] HID: Fix slab-out-of-bounds read in hid_field_extract (Broken!)

Quoted 39 lines · peter enderborg
Quoted 38 lines · Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit 8ec321e96e056de84022c032ffea253431a83c3c upstream.

The syzbot fuzzer found a slab-out-of-bounds bug in the HID report handler. The bug was caused by a report descriptor which included a field with size 12 bits and count 4899, for a total size of 7349 bytes.

The usbhid driver uses at most a single-page 4-KB buffer for reports. In the test there wasn't any problem about overflowing the buffer, since only one byte was received from the device. Rather, the bug occurred when the HID core tried to extract the data from the report fields, which caused it to try reading data beyond the end of the allocated buffer.

This patch fixes the problem by rejecting any report whose total length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow for a possible report index). In theory a device could have a report longer than that, but if there was such a thing we wouldn't handle it correctly anyway.

---
 drivers/hid/hid-core.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/hid/hid-core.c +0 -0
@@ -288,6 +288,12 @@ static int hid_add_field(struct hid_pars
 	offset = report->size;
 	report->size += parser->global.report_size * parser->global.report_count;
 
Quoted 13 lines

drivers/hid/hid-core.c static int hid_add_field(struct hid_pars · line 299

Quoted 12 lines
drivers/hid/hid-core.c +6 -0
+	/* Total size check: Allow for possible report index byte */
+	if (report->size > (HID_MAX_BUFFER_SIZE - 1) << 3) {
+		hid_err(parser->device, "report is too long\n");
+		return -1;
+	}
+
 	if (!parser->local.usage_index) /* Ignore padding fields */
 		return 0;
 

This patch breaks Elgato StreamDeck.

Does that mean the device is broken with a too-large of a report?

Is it broken in Linus's tree? If so, can you work with the HID developers to fix it there so we can backport the fix to all stable trees?

thanks,

greg k-h

#20 lore raw

Re: [PATCH 5.4 17/78] HID: Fix slab-out-of-bounds read in hid_field_extract (Broken!)

Quoted 53 lines · Greg Kroah-Hartman
Quoted 39 lines · peter enderborg
Quoted 38 lines · Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit 8ec321e96e056de84022c032ffea253431a83c3c upstream.

The syzbot fuzzer found a slab-out-of-bounds bug in the HID report handler. The bug was caused by a report descriptor which included a field with size 12 bits and count 4899, for a total size of 7349 bytes.

The usbhid driver uses at most a single-page 4-KB buffer for reports. In the test there wasn't any problem about overflowing the buffer, since only one byte was received from the device. Rather, the bug occurred when the HID core tried to extract the data from the report fields, which caused it to try reading data beyond the end of the allocated buffer.

This patch fixes the problem by rejecting any report whose total length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow for a possible report index). In theory a device could have a report longer than that, but if there was such a thing we wouldn't handle it correctly anyway.

---
 drivers/hid/hid-core.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/hid/hid-core.c +0 -0
@@ -288,6 +288,12 @@ static int hid_add_field(struct hid_pars
 	offset = report->size;
 	report->size += parser->global.report_size * parser->global.report_count;
 
Quoted 13 lines

drivers/hid/hid-core.c static int hid_add_field(struct hid_pars · line 299

Quoted 12 lines
drivers/hid/hid-core.c +6 -0
+	/* Total size check: Allow for possible report index byte */
+	if (report->size > (HID_MAX_BUFFER_SIZE - 1) << 3) {
+		hid_err(parser->device, "report is too long\n");
+		return -1;
+	}
+
 	if (!parser->local.usage_index) /* Ignore padding fields */
 		return 0;
 

This patch breaks Elgato StreamDeck.

Quoted 1 line

Does that mean the device is broken with a too-large of a report?

Yes.

Quoted 3 lines

Is it broken in Linus's tree? If so, can you work with the HID developers to fix it there so we can backport the fix to all stable trees?

I cant see that there are any other fixes upon this so I dont think so. I can try.

Jiri is in the loop. I guess he is the "HID developers" ?

Quoted 4 lines

thanks,

greg k-h

maintainer
#21 lore raw

Re: [PATCH 5.4 17/78] HID: Fix slab-out-of-bounds read in hid_field_extract (Broken!)

Quoted 5 lines · Peter
Quoted 3 lines
Quoted 1 line

This patch breaks Elgato StreamDeck.

Does that mean the device is broken with a too-large of a report?

Yes.

In which way does the breakage pop up? Are you getting "report too long" errors in dmesg, or the device just doesn't enumerate at all?

Could you please post /sys/kernel/debug/hid/<device>/rdesc contents, and if the device is at least semi-alive, also contents of /sys/kernel/debug/hid/<device>/events from the time it misbehaves?

Quoted 9 lines
Quoted 3 lines

Is it broken in Linus's tree? If so, can you work with the HID developers to fix it there so we can backport the fix to all stable trees?

I cant see that there are any other fixes upon this so I dont think so. I can try.

Jiri is in the loop. I guess he is the "HID developers" ?

Thanks,

Signature · 2 lines
Jiri Kosina
SUSE Labs
#22 lore raw

Re: [PATCH 5.4 17/78] HID: Fix slab-out-of-bounds read in hid_field_extract (Broken!)

Quoted 12 lines · Jiri Kosina
Quoted 3 lines · Peter
Quoted 2 lines
Quoted 1 line

This patch breaks Elgato StreamDeck.

Does that mean the device is broken with a too-large of a report?

Yes.

In which way does the breakage pop up? Are you getting "report too long" errors in dmesg, or the device just doesn't enumerate at all?

Could you please post /sys/kernel/debug/hid/<device>/rdesc contents, and if the device is at least semi-alive, also contents of /sys/kernel/debug/hid/<device>/events from the time it misbehaves?

Sure.

[   18.710500] hid-generic 0003:0FD9:0060.0005: report is too long
[   18.716511] hid-generic 0003:0FD9:0060.0005: item 0 1 0 9 parsing failed
[   18.723359] hid-generic: probe of 0003:0FD9:0060.0005 failed with error -22
[root@imx ~]# cat /sys/kernel/debug/hid/0003\:0FD9\:0060.0005/rdesc
05 0c 09 01 a1 01 09 01 05 09 19 01 29 10 15 00 26 ff 00 75 08 95 10 85 01 81 02 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 a0 81 02 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 a1 81 02 0a 00 ff 15 00 26 ff 00 75 08 96 fe 1f 85 02 91 02 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 03 b1 02 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 04 b1 02 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 05 b1 02 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 01 85 06 b1 02 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 07 b1 04 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 01 85 08 b1 04 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 09 b1 04 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 0a b1 04 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 0b b1 04 c0 c0

The rdesc is different in 5.3.16 and quite long where it works. The head is there:

[root@imx ~]# cat rdesc.5.3.16 | more
05 0c 09 01 a1 01 09 01 05 09 19 01 29 10 15 00 26 ff 00 75 08 95 10 85 01 81 02 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 a0 81 02 0a 00 ff 15 00 26 ff 00 75 08 9 5 10 85 a1 81 02 0a 00 ff 15 00 26 ff 00 75 08 96 fe 1f 85 02 91 02 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 03 b1 02 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 04 b1 02 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 05 b1 02 c0 a 1 00 0a 00 ff 15 00 26 ff 00 75 08 95 01 85 06 b1 02 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 07 b1 04 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 01 85 08 b1 04 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 09 b1 04 c0 a1 00 0a 00 f f 15 00 26 ff 00 75 08 95 10 85 0a b1 04 c0 a1 00 0a 00 ff 15 00 26 ff 00 75 08 95 10 85 0b b1 04 c0 c0

  INPUT(1)[INPUT]
    Field(0)
      Application(Consumer.0001)
      Usage(17)
        Consumer.0001
        Button.0001
        Button.0002
        Button.0003
        Button.0004
        Button.0005
        Button.0006
        Button.0007
        Button.0008
        Button.0009
        Button.000a
        Button.000b
        Button.000c
        Button.000d
        Button.000e
        Button.000f
        Button.0010
      Logical Minimum(0)
      Logical Maximum(255)
      Report Size(8)
      Report Count(16)
      Report Offset(0)
      Flags( Variable Absolute )
  INPUT(160)[INPUT]
    Field(0)
      Application(Consumer.0001)
      Usage(16)
        Button.ff00
        Button.ff00
        Button.ff00
        Button.ff00

Quoted 10 lines
Quoted 8 lines
Quoted 3 lines

Is it broken in Linus's tree? If so, can you work with the HID developers to fix it there so we can backport the fix to all stable trees?

I cant see that there are any other fixes upon this so I dont think so. I can try.

Jiri is in the loop. I guess he is the "HID developers" ?

Thanks,

#23 lore raw

Re: [PATCH 5.4 17/78] HID: Fix slab-out-of-bounds read in hid_field_extract (Broken!)

In reply to Jiri Kosina
Quoted 6 lines · Jiri Kosina
Quoted 4 lines · Peter
Quoted 3 lines
Quoted 1 line

This patch breaks Elgato StreamDeck.

Does that mean the device is broken with a too-large of a report?

Quoted 8 lines
Quoted 1 line

Yes.

In which way does the breakage pop up? Are you getting "report too long" errors in dmesg, or the device just doesn't enumerate at all?

Could you please post /sys/kernel/debug/hid/<device>/rdesc contents, and if the device is at least semi-alive, also contents of /sys/kernel/debug/hid/<device>/events from the time it misbehaves?

Also, please post the output from "lsusb -v" for the StreamDeck.

Alan Stern

#24 lore raw

Re: [PATCH 5.4 17/78] HID: Fix slab-out-of-bounds read in hid_field_extract (Broken!)

Quoted 6 lines · Alan Stern
Quoted 4 lines · Jiri Kosina
Quoted 2 lines · Peter
Quoted 2 lines
Quoted 1 line

This patch breaks Elgato StreamDeck.

Does that mean the device is broken with a too-large of a report?

Quoted 8 lines
Quoted 7 lines
Quoted 1 line

Yes.

In which way does the breakage pop up? Are you getting "report too long" errors in dmesg, or the device just doesn't enumerate at all?

Could you please post /sys/kernel/debug/hid/<device>/rdesc contents, and if the device is at least semi-alive, also contents of /sys/kernel/debug/hid/<device>/events from the time it misbehaves?

Also, please post the output from "lsusb -v" for the StreamDeck.

Bus 002 Device 008: ID 0fd9:0060 Elgato Systems GmbH Stream Deck Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0fd9 Elgato Systems GmbH idProduct          0x0060
  bcdDevice            1.00
  iManufacturer           1
  iProduct                2
  iSerial                 3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0029
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              400mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         3 Human Interface Device bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported bNumDescriptors         1
          bDescriptorType        34 Report wDescriptorLength     248
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes bInterval               1

Quoted 2 lines

Alan Stern

#25 lore raw

Re: [PATCH 5.4 17/78] HID: Fix slab-out-of-bounds read in hid_field_extract (Broken!)

Quoted 41 lines · Peter
Quoted 1 line

Also, please post the output from "lsusb -v" for the StreamDeck.

Bus 002 Device 008: ID 0fd9:0060 Elgato Systems GmbH Stream Deck Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0fd9 Elgato Systems GmbH idProduct          0x0060
  bcdDevice            1.00
  iManufacturer           1
  iProduct                2
  iSerial                 3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0029
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              400mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         3 Human Interface Device bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
        HID Device Descriptor:
          bLength                 9

Quoted 8 lines

          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     248
         Report Descriptors:
           ** UNAVAILABLE **

I was hoping to see the report descriptors. This would produce the actual descriptors as sent by the device, not the kernel's interpretation or modification of the descriptors.

I guess you have to unbind the device from the usbhid driver first in order for lsusb to get them. Can you do that?

Alan Stern

#26 lore raw

Re: [PATCH 5.4 17/78] HID: Fix slab-out-of-bounds read in hid_field_extract (Broken!)

Quoted 50 lines · Alan Stern
Quoted 40 lines · Peter
Quoted 1 line

Also, please post the output from "lsusb -v" for the StreamDeck.

Bus 002 Device 008: ID 0fd9:0060 Elgato Systems GmbH Stream Deck Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0fd9 Elgato Systems GmbH idProduct          0x0060
  bcdDevice            1.00
  iManufacturer           1
  iProduct                2
  iSerial                 3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0029
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              400mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         3 Human Interface Device bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
        HID Device Descriptor:
          bLength                 9

Quoted 8 lines

          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     248
         Report Descriptors:
           ** UNAVAILABLE **

Quoted 9 lines

I was hoping to see the report descriptors. This would produce the actual descriptors as sent by the device, not the kernel's interpretation or modification of the descriptors.

I guess you have to unbind the device from the usbhid driver first in order for lsusb to get them. Can you do that?

Alan Stern

Im not sure exatly what you need to unbind. But I assume this is what you want:

 lsusb -v -d 0fd9:0060

Bus 002 Device 002: ID 0fd9:0060 Elgato Systems GmbH Stream Deck Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0fd9 Elgato Systems GmbH
  idProduct          0x0060
  bcdDevice            1.00
  iManufacturer           1 Elgato Systems
  iProduct                2 Stream Deck
  iSerial                 3 AL01H1A08945
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0029
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              400mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         3 Human Interface Device bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.11
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength     248
          Report Descriptor: (length is 248)
            Item(Global): Usage Page, data= [ 0x0c ] 12
                            Consumer
            Item(Local ): Usage, data= [ 0x01 ] 1
                            Consumer Control
            Item(Main  ): Collection, data= [ 0x01 ] 1
                            Application
            Item(Local ): Usage, data= [ 0x01 ] 1
                            Consumer Control
            Item(Global): Usage Page, data= [ 0x09 ] 9
                            Buttons
            Item(Local ): Usage Minimum, data= [ 0x01 ] 1
                            Button 1 (Primary)
            Item(Local ): Usage Maximum, data= [ 0x10 ] 16
                            (null)
            Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Report Count, data= [ 0x10 ] 16 Item(Global): Report ID, data= [ 0x01 ] 1
            Item(Main  ): Input, data= [ 0x02 ] 2
                            Data Variable Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Local ): Usage, data= [ 0x00 0xff ] 65280
                            (null)
            Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Report Count, data= [ 0x10 ] 16 Item(Global): Report ID, data= [ 0xa0 ] 160
            Item(Main  ): Input, data= [ 0x02 ] 2
                            Data Variable Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Local ): Usage, data= [ 0x00 0xff ] 65280
                            (null)
            Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Report Count, data= [ 0x10 ] 16 Item(Global): Report ID, data= [ 0xa1 ] 161
            Item(Main  ): Input, data= [ 0x02 ] 2
                            Data Variable Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Local ): Usage, data= [ 0x00 0xff ] 65280
                            (null)
            Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Report Count, data= [ 0xfe 0x1f ] 8190 Item(Global): Report ID, data= [ 0x02 ] 2
            Item(Main  ): Output, data= [ 0x02 ] 2
                            Data Variable Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Main  ): Collection, data= [ 0x00 ] 0
                            Physical
            Item(Local ): Usage, data= [ 0x00 0xff ] 65280
                            (null)
            Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Report Count, data= [ 0x10 ] 16 Item(Global): Report ID, data= [ 0x03 ] 3
            Item(Main  ): Feature, data= [ 0x02 ] 2
                            Data Variable Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Main  ): End Collection, data=none
            Item(Main  ): Collection, data= [ 0x00 ] 0
                            Physical
            Item(Local ): Usage, data= [ 0x00 0xff ] 65280
                            (null)
            Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Report Count, data= [ 0x10 ] 16 Item(Global): Report ID, data= [ 0x04 ] 4
            Item(Main  ): Feature, data= [ 0x02 ] 2
                            Data Variable Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Main  ): End Collection, data=none
            Item(Main  ): Collection, data= [ 0x00 ] 0
                            Physical
            Item(Local ): Usage, data= [ 0x00 0xff ] 65280
                            (null)
            Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Report Count, data= [ 0x10 ] 16 Item(Global): Report ID, data= [ 0x05 ] 5
            Item(Main  ): Feature, data= [ 0x02 ] 2
                            Data Variable Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Main  ): End Collection, data=none
            Item(Main  ): Collection, data= [ 0x00 ] 0
                            Physical
            Item(Local ): Usage, data= [ 0x00 0xff ] 65280
                            (null)
            Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Report Count, data= [ 0x01 ] 1 Item(Global): Report ID, data= [ 0x06 ] 6
            Item(Main  ): Feature, data= [ 0x02 ] 2
                            Data Variable Absolute No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Main  ): End Collection, data=none
            Item(Main  ): Collection, data= [ 0x00 ] 0
                            Physical
            Item(Local ): Usage, data= [ 0x00 0xff ] 65280
                            (null)
            Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Report Count, data= [ 0x10 ] 16 Item(Global): Report ID, data= [ 0x07 ] 7
            Item(Main  ): Feature, data= [ 0x04 ] 4
                            Data Array Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Main  ): End Collection, data=none
            Item(Main  ): Collection, data= [ 0x00 ] 0
                            Physical
            Item(Local ): Usage, data= [ 0x00 0xff ] 65280
                            (null)
            Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Report Count, data= [ 0x01 ] 1 Item(Global): Report ID, data= [ 0x08 ] 8
            Item(Main  ): Feature, data= [ 0x04 ] 4
                            Data Array Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Main  ): End Collection, data=none
            Item(Main  ): Collection, data= [ 0x00 ] 0
                            Physical
            Item(Local ): Usage, data= [ 0x00 0xff ] 65280
                            (null)
            Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Report Count, data= [ 0x10 ] 16 Item(Global): Report ID, data= [ 0x09 ] 9
            Item(Main  ): Feature, data= [ 0x04 ] 4
                            Data Array Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Main  ): End Collection, data=none
            Item(Main  ): Collection, data= [ 0x00 ] 0
                            Physical
            Item(Local ): Usage, data= [ 0x00 0xff ] 65280
                            (null)
            Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Report Count, data= [ 0x10 ] 16 Item(Global): Report ID, data= [ 0x0a ] 10
            Item(Main  ): Feature, data= [ 0x04 ] 4
                            Data Array Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Main  ): End Collection, data=none
            Item(Main  ): Collection, data= [ 0x00 ] 0
                            Physical
            Item(Local ): Usage, data= [ 0x00 0xff ] 65280
                            (null)
            Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xff 0x00 ] 255 Item(Global): Report Size, data= [ 0x08 ] 8
            Item(Global): Report Count, data= [ 0x10 ] 16 Item(Global): Report ID, data= [ 0x0b ] 11
            Item(Main  ): Feature, data= [ 0x04 ] 4
                            Data Array Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield Item(Main  ): End Collection, data=none
            Item(Main  ): End Collection, data=none
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes

    bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data wMaxPacketSize     0x0200  1x 512 bytes bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
can't get debug descriptor: Resource temporarily unavailable Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

#27 lore raw

Re: [PATCH 5.4 17/78] HID: Fix slab-out-of-bounds read in hid_field_extract (Broken!)

Quoted 10 lines · Peter
Quoted 5 lines · Alan Stern

I guess you have to unbind the device from the usbhid driver first in order for lsusb to get them. Can you do that?

Alan Stern

Im not sure exatly what you need to unbind. But I assume this is what you want:

 lsusb -v -d 0fd9:0060

Yes, that's it. Most of the reports have:

Quoted 2 lines

            Item(Global): Report Size, data= [ 0x08 ] 8 Item(Global): Report Count, data= [ 0x10 ] 16

which means they are 16 bytes long. But one report has:

Quoted 2 lines

            Item(Global): Report Size, data= [ 0x08 ] 8 Item(Global): Report Count, data= [ 0xfe 0x1f ] 8190

meaning it is 8190 bytes long (plus one byte for the report ID). Therefore setting the maximum buffer size to 8192 should allow this device to work properly, with no other changes needed.

Alan Stern

#28 lore raw

PATCH 1/1 HID: Extend report buffer size

In the patch "HID: Fix slab-out-of-bounds read in hid_field_extract" there added a check for buffer overruns. This made Elgato StreamDeck to fail. This patch extend the buffer to 8192 to solve this. It also adds a print of the requested length if it fails on this test.

---
 drivers/hid/hid-core.c | 2 +-
 include/linux/hid.h    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/hid/hid-core.c +1 -1
index 851fe54ea59e..28841219b3d2 100644
@@ -290,7 +290,7 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
 
 	/* Total size check: Allow for possible report index byte */
 	if (report->size > (HID_MAX_BUFFER_SIZE - 1) << 3) {
-		hid_err(parser->device, "report is too long\n");
+		hid_err(parser->device, "report is too long (%d)\n", report->size);
 		return -1;
 	}
 
include/linux/hid.h +1 -1
index cd41f209043f..875f71132b14 100644
@@ -492,7 +492,7 @@ struct hid_report_enum {
 };
 
 #define HID_MIN_BUFFER_SIZE	64		/* make sure there is at least a packet size of space */
-#define HID_MAX_BUFFER_SIZE	4096		/* 4kb */
+#define HID_MAX_BUFFER_SIZE	8192		/* 8kb */
 #define HID_CONTROL_FIFO_SIZE	256		/* to init devices with >100 reports */
 #define HID_OUTPUT_FIFO_SIZE	64
 
Signature · 1 line
2.17.1
author maintainer
#29 lore raw

Re: [PATCH] HID: Extend report buffer size

Quoted 6 lines · Peter Enderborg

In the patch "HID: Fix slab-out-of-bounds read in hid_field_extract" there added a check for buffer overruns. This made Elgato StreamDeck to fail. This patch extend the buffer to 8192 to solve this. It also adds a print of the requested length if it fails on this test.

Can you add a "Fixes:" tag here pointing to the commit it fixes, as well as a cc: stable as I'm pretty sure that the commit this fixes is also in the stable trees already, right?

thanks,

greg k-h

#30 lore raw

PATCH 1/1 HID: Extend report buffer size

In the patch "HID: Fix slab-out-of-bounds read in hid_field_extract" there added a check for buffer overruns. This made Elgato StreamDeck to fail. This patch extend the buffer to 8192 to solve this. It also adds a print of the requested length if it fails on this test.

Fixes 8ec321e96e05 ("HID: Fix slab-out-of-bounds read in hid_field_extract")
---
 drivers/hid/hid-core.c | 2 +-
 include/linux/hid.h    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/hid/hid-core.c +1 -1
index 851fe54ea59e..28841219b3d2 100644
@@ -290,7 +290,7 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
 
 	/* Total size check: Allow for possible report index byte */
 	if (report->size > (HID_MAX_BUFFER_SIZE - 1) << 3) {
-		hid_err(parser->device, "report is too long\n");
+		hid_err(parser->device, "report is too long (%d)\n", report->size);
 		return -1;
 	}
 
include/linux/hid.h +1 -1
index cd41f209043f..875f71132b14 100644
@@ -492,7 +492,7 @@ struct hid_report_enum {
 };
 
 #define HID_MIN_BUFFER_SIZE	64		/* make sure there is at least a packet size of space */
-#define HID_MAX_BUFFER_SIZE	4096		/* 4kb */
+#define HID_MAX_BUFFER_SIZE	8192		/* 8kb */
 #define HID_CONTROL_FIFO_SIZE	256		/* to init devices with >100 reports */
 #define HID_OUTPUT_FIFO_SIZE	64
 
Signature · 1 line
2.17.1
author maintainer
#31 lore raw

Re: [PATCH] HID: Extend report buffer size

Quoted 8 lines · Peter Enderborg

In the patch "HID: Fix slab-out-of-bounds read in hid_field_extract" there added a check for buffer overruns. This made Elgato StreamDeck to fail. This patch extend the buffer to 8192 to solve this. It also adds a print of the requested length if it fails on this test.

Fixes 8ec321e96e05 ("HID: Fix slab-out-of-bounds read in hid_field_extract")

---

<formletter>

This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

</formletter>

#32 lore raw

Re: [PATCH] HID: Extend report buffer size

In reply to Peter Enderborg
Quoted 29 lines · Peter Enderborg

In the patch "HID: Fix slab-out-of-bounds read in hid_field_extract" there added a check for buffer overruns. This made Elgato StreamDeck to fail. This patch extend the buffer to 8192 to solve this. It also adds a print of the requested length if it fails on this test.

---
 drivers/hid/hid-core.c | 2 +-
 include/linux/hid.h    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/hid/hid-core.c +1 -1
index 851fe54ea59e..28841219b3d2 100644
@@ -290,7 +290,7 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
 
 	/* Total size check: Allow for possible report index byte */
 	if (report->size > (HID_MAX_BUFFER_SIZE - 1) << 3) {
-		hid_err(parser->device, "report is too long\n");
+		hid_err(parser->device, "report is too long (%d)\n", report->size);
 		return -1;
 	}
 
include/linux/hid.h +0 -0
index cd41f209043f..875f71132b14 100644

include/linux/hid.h struct hid_report_enum { · line 497

Quoted 7 lines
include/linux/hid.h +1 -1
@@ -492,7 +492,7 @@ struct hid_report_enum {
 };
 
 #define HID_MIN_BUFFER_SIZE	64		/* make sure there is at least a packet size of space */
-#define HID_MAX_BUFFER_SIZE	4096		/* 4kb */
+#define HID_MAX_BUFFER_SIZE	8192		/* 8kb */
 #define HID_CONTROL_FIFO_SIZE	256		/* to init devices with >100 reports */
 #define HID_OUTPUT_FIFO_SIZE	64

The second part of this patch is identical to the "HID: core: increase HID report buffer size to 8KiB" patch submitted by Johan Korsnes a few weeks ago. You might want to submit just the first part of your patch, or not submit anything at all.

Alan Stern

#33 lore raw

Re: [PATCH] HID: Extend report buffer size

Quoted 43 lines · Alan Stern
Quoted 29 lines · Peter Enderborg

In the patch "HID: Fix slab-out-of-bounds read in hid_field_extract" there added a check for buffer overruns. This made Elgato StreamDeck to fail. This patch extend the buffer to 8192 to solve this. It also adds a print of the requested length if it fails on this test.

---
 drivers/hid/hid-core.c | 2 +-
 include/linux/hid.h    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/hid/hid-core.c +1 -1
index 851fe54ea59e..28841219b3d2 100644
@@ -290,7 +290,7 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
 
 	/* Total size check: Allow for possible report index byte */
 	if (report->size > (HID_MAX_BUFFER_SIZE - 1) << 3) {
-		hid_err(parser->device, "report is too long\n");
+		hid_err(parser->device, "report is too long (%d)\n", report->size);
 		return -1;
 	}
 
include/linux/hid.h +0 -0
index cd41f209043f..875f71132b14 100644

include/linux/hid.h struct hid_report_enum { · line 497

Quoted 7 lines
include/linux/hid.h +1 -1
@@ -492,7 +492,7 @@ struct hid_report_enum {
 };
 
 #define HID_MIN_BUFFER_SIZE	64		/* make sure there is at least a packet size of space */
-#define HID_MAX_BUFFER_SIZE	4096		/* 4kb */
+#define HID_MAX_BUFFER_SIZE	8192		/* 8kb */
 #define HID_CONTROL_FIFO_SIZE	256		/* to init devices with >100 reports */
 #define HID_OUTPUT_FIFO_SIZE	64

The second part of this patch is identical to the "HID: core: increase HID report buffer size to 8KiB" patch submitted by Johan Korsnes a few weeks ago. You might want to submit just the first part of your patch, or not submit anything at all.

Quoted 3 lines

Alan Stern

Korsnes patch is not in Torvalds tree nor is it requested for stable. How do we get it there?

#34 lore raw

Re: [PATCH] HID: Extend report buffer size

Quoted 44 lines · peter enderborg
Quoted 43 lines · Alan Stern
Quoted 29 lines · Peter Enderborg

In the patch "HID: Fix slab-out-of-bounds read in hid_field_extract" there added a check for buffer overruns. This made Elgato StreamDeck to fail. This patch extend the buffer to 8192 to solve this. It also adds a print of the requested length if it fails on this test.

---
 drivers/hid/hid-core.c | 2 +-
 include/linux/hid.h    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/hid/hid-core.c +1 -1
index 851fe54ea59e..28841219b3d2 100644
@@ -290,7 +290,7 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
 
 	/* Total size check: Allow for possible report index byte */
 	if (report->size > (HID_MAX_BUFFER_SIZE - 1) << 3) {
-		hid_err(parser->device, "report is too long\n");
+		hid_err(parser->device, "report is too long (%d)\n", report->size);
 		return -1;
 	}
 
include/linux/hid.h +0 -0
index cd41f209043f..875f71132b14 100644

include/linux/hid.h struct hid_report_enum { · line 497

Quoted 7 lines
include/linux/hid.h +1 -1
@@ -492,7 +492,7 @@ struct hid_report_enum {
 };
 
 #define HID_MIN_BUFFER_SIZE	64		/* make sure there is at least a packet size of space */
-#define HID_MAX_BUFFER_SIZE	4096		/* 4kb */
+#define HID_MAX_BUFFER_SIZE	8192		/* 8kb */
 #define HID_CONTROL_FIFO_SIZE	256		/* to init devices with >100 reports */
 #define HID_OUTPUT_FIFO_SIZE	64

The second part of this patch is identical to the "HID: core: increase HID report buffer size to 8KiB" patch submitted by Johan Korsnes a few weeks ago. You might want to submit just the first part of your patch, or not submit anything at all.

Quoted 4 lines
Quoted 3 lines

Alan Stern

Korsnes patch is not in Torvalds tree nor is it requested for stable. How do we get it there?

Bring the whole matter to Jiri's attention. He is the person who will take care of it.

Alan Stern

maintainer
#35 lore raw

Re: [PATCH] HID: Extend report buffer size

Quoted 41 lines · Alan Stern
Quoted 41 lines
Quoted 41 lines
Quoted 29 lines

In the patch "HID: Fix slab-out-of-bounds read in hid_field_extract" there added a check for buffer overruns. This made Elgato StreamDeck to fail. This patch extend the buffer to 8192 to solve this. It also adds a print of the requested length if it fails on this test.

---
 drivers/hid/hid-core.c | 2 +-
 include/linux/hid.h    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/hid/hid-core.c +1 -1
index 851fe54ea59e..28841219b3d2 100644
@@ -290,7 +290,7 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
 
 	/* Total size check: Allow for possible report index byte */
 	if (report->size > (HID_MAX_BUFFER_SIZE - 1) << 3) {
-		hid_err(parser->device, "report is too long\n");
+		hid_err(parser->device, "report is too long (%d)\n", report->size);
 		return -1;
 	}
 
include/linux/hid.h +0 -0
index cd41f209043f..875f71132b14 100644

include/linux/hid.h struct hid_report_enum { · line 497

Quoted 7 lines
include/linux/hid.h +1 -1
@@ -492,7 +492,7 @@ struct hid_report_enum {
 };
 
 #define HID_MIN_BUFFER_SIZE	64		/* make sure there is at least a packet size of space */
-#define HID_MAX_BUFFER_SIZE	4096		/* 4kb */
+#define HID_MAX_BUFFER_SIZE	8192		/* 8kb */
 #define HID_CONTROL_FIFO_SIZE	256		/* to init devices with >100 reports */
 #define HID_OUTPUT_FIFO_SIZE	64

The second part of this patch is identical to the "HID: core: increase HID report buffer size to 8KiB" patch submitted by Johan Korsnes a few weeks ago. You might want to submit just the first part of your patch, or not submit anything at all.

Quoted 7 lines
Quoted 4 lines
Quoted 3 lines

Alan Stern

Korsnes patch is not in Torvalds tree nor is it requested for stable. How do we get it there?

Bring the whole matter to Jiri's attention. He is the person who will take care of it.

I have been a bit swamped during past few days. Johan's patch is in my list of things to process either today or tomorrow.

Thanks,

Signature · 2 lines
Jiri Kosina
SUSE Labs
author maintainer
#36 lore raw

PATCH 18/78 HID: uhid: Fix returning EPOLLOUT from uhid_char_poll

In reply to Greg Kroah-Hartman

From: Marcel Holtmann <[email protected]>

commit be54e7461ffdc5809b67d2aeefc1ddc9a91470c7 upstream.

Always return EPOLLOUT from uhid_char_poll to allow polling /dev/uhid for writable state.

Fixes 1f9dec1e0164 ("HID: uhid: allow poll()'ing on uhid devices")
---
 drivers/hid/uhid.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hid/uhid.c +1 -1
@@ -772,7 +772,7 @@ static __poll_t uhid_char_poll(struct fi
 	if (uhid->head != uhid->tail)
 		return EPOLLIN | EPOLLRDNORM;
 
-	return 0;
+	return EPOLLOUT | EPOLLWRNORM;
 }
 
 static const struct file_operations uhid_fops = {
author maintainer
#37 lore raw

PATCH 19/78 HID: hidraw: Fix returning EPOLLOUT from hidraw_poll

In reply to Greg Kroah-Hartman

From: Marcel Holtmann <[email protected]>

commit 9f3b61dc1dd7b81e99e7ed23776bb64a35f39e1a upstream.

When polling a connected /dev/hidrawX device, it is useful to get the EPOLLOUT when writing is possible. Since writing is possible as soon as the device is connected, always return it.

Right now EPOLLOUT is only returned when there are also input reports are available. This works if devices start sending reports when connected, but some HID devices might need an output report first before sending any input reports. This change will allow using EPOLLOUT here as well.

Fixes 378b80370aa1 ("hidraw: Return EPOLLOUT from hidraw_poll")
---
 drivers/hid/hidraw.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/hid/hidraw.c +2 -2
@@ -252,10 +252,10 @@ static __poll_t hidraw_poll(struct file
 
 	poll_wait(file, &list->hidraw->wait, wait);
 	if (list->head != list->tail)
-		return EPOLLIN | EPOLLRDNORM | EPOLLOUT;
+		return EPOLLIN | EPOLLRDNORM;
 	if (!list->hidraw->exist)
 		return EPOLLERR | EPOLLHUP;
-	return 0;
+	return EPOLLOUT | EPOLLWRNORM;
 }
 
 static int hidraw_open(struct inode *inode, struct file *file)
author maintainer
#38 lore raw

PATCH 20/78 HID: hid-input: clear unmapped usages

In reply to Greg Kroah-Hartman

From: Dmitry Torokhov <[email protected]>

commit 4f3882177240a1f55e45a3d241d3121341bead78 upstream.

We should not be leaving half-mapped usages with potentially invalid keycodes, as that may confuse hidinput_find_key() when the key is located by index, which may end up feeding way too large keycode into the VT keyboard handler and cause OOB write there:

BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline]
BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
Write of size 8 at addr ffffffff89a1b2d8 by task syz-executor108/1722
...
 kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline]
 kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495
 input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118
 input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145
 input_pass_values drivers/input/input.c:949 [inline]
 input_set_keycode+0x290/0x320 drivers/input/input.c:954
 evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882
 evdev_do_ioctl drivers/input/evdev.c:1150 [inline]
---
 drivers/hid/hid-input.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/hid/hid-input.c +12 -4
@@ -1132,9 +1132,15 @@ static void hidinput_configure_usage(str
 	}
 
 mapped:
-	if (device->driver->input_mapped && device->driver->input_mapped(device,
-				hidinput, field, usage, &bit, &max) < 0)
-		goto ignore;
+	if (device->driver->input_mapped &&
+	    device->driver->input_mapped(device, hidinput, field, usage,
+					 &bit, &max) < 0) {
+		/*
+		 * The driver indicated that no further generic handling
+		 * of the usage is desired.
+		 */
+		return;
+	}
 
 	set_bit(usage->type, input->evbit);
 
@@ -1215,9 +1221,11 @@ mapped:
 		set_bit(MSC_SCAN, input->mscbit);
 	}
 
-ignore:
 	return;
 
+ignore:
+	usage->type = 0;
+	usage->code = 0;
 }
 
 static void hidinput_handle_scroll(struct hid_usage *usage,
author maintainer
#39 lore raw

PATCH 21/78 Input: add safety guards to input_set_keycode()

In reply to Greg Kroah-Hartman

From: Dmitry Torokhov <[email protected]>

commit cb222aed03d798fc074be55e59d9a112338ee784 upstream.

If we happen to have a garbage in input device's keycode table with values too big we'll end up doing clear_bit() with offset way outside of our bitmaps, damaging other objects within an input device or even outside of it. Let's add sanity checks to the returned old keycodes.

---
 drivers/input/input.c |   26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)
drivers/input/input.c +16 -10
@@ -878,16 +878,18 @@ static int input_default_setkeycode(stru
 		}
 	}
 
-	__clear_bit(*old_keycode, dev->keybit);
-	__set_bit(ke->keycode, dev->keybit);
-
-	for (i = 0; i < dev->keycodemax; i++) {
-		if (input_fetch_keycode(dev, i) == *old_keycode) {
-			__set_bit(*old_keycode, dev->keybit);
-			break; /* Setting the bit twice is useless, so break */
+	if (*old_keycode <= KEY_MAX) {
+		__clear_bit(*old_keycode, dev->keybit);
+		for (i = 0; i < dev->keycodemax; i++) {
+			if (input_fetch_keycode(dev, i) == *old_keycode) {
+				__set_bit(*old_keycode, dev->keybit);
+				/* Setting the bit twice is useless, so break */
+				break;
+			}
 		}
 	}
 
+	__set_bit(ke->keycode, dev->keybit);
 	return 0;
 }
 
@@ -943,9 +945,13 @@ int input_set_keycode(struct input_dev *
 	 * Simulate keyup event if keycode is not present
 	 * in the keymap anymore
 	 */
-	if (test_bit(EV_KEY, dev->evbit) &&
-	    !is_event_supported(old_keycode, dev->keybit, KEY_MAX) &&
-	    __test_and_clear_bit(old_keycode, dev->key)) {
+	if (old_keycode > KEY_MAX) {
+		dev_warn(dev->dev.parent ?: &dev->dev,
+			 "%s: got too big old keycode %#x\n",
+			 __func__, old_keycode);
+	} else if (test_bit(EV_KEY, dev->evbit) &&
+		   !is_event_supported(old_keycode, dev->keybit, KEY_MAX) &&
+		   __test_and_clear_bit(old_keycode, dev->key)) {
 		struct input_value vals[] =  {
 			{ EV_KEY, old_keycode, 0 },
 			input_value_sync
author maintainer
#40 lore raw

PATCH 22/78 Input: input_event - fix struct padding on sparc64

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

commit f729a1b0f8df7091cea3729fc0e414f5326e1163 upstream.

Going through all uses of timeval, I noticed that we screwed up input_event in the previous attempts to fix it:

The time fields now match between kernel and user space, but all following fields are in the wrong place.

Add the required padding that is implied by the glibc timeval definition to fix the layout, and use a struct initializer to avoid leaking kernel stack data.

Fixes 141e5dcaa735 ("Input: input_event - fix the CONFIG_SPARC64 mixup")
Fixes 2e746942ebac ("Input: input_event - provide override for sparc64")
---
 drivers/input/evdev.c       |   14 +++++++-------
 drivers/input/misc/uinput.c |   14 +++++++++-----
 include/uapi/linux/input.h  |    1 +
 3 files changed, 17 insertions(+), 12 deletions(-)
drivers/input/evdev.c +7 -7
@@ -224,13 +224,13 @@ static void __pass_event(struct evdev_cl
 		 */
 		client->tail = (client->head - 2) & (client->bufsize - 1);
 
-		client->buffer[client->tail].input_event_sec =
-						event->input_event_sec;
-		client->buffer[client->tail].input_event_usec =
-						event->input_event_usec;
-		client->buffer[client->tail].type = EV_SYN;
-		client->buffer[client->tail].code = SYN_DROPPED;
-		client->buffer[client->tail].value = 0;
+		client->buffer[client->tail] = (struct input_event) {
+			.input_event_sec = event->input_event_sec,
+			.input_event_usec = event->input_event_usec,
+			.type = EV_SYN,
+			.code = SYN_DROPPED,
+			.value = 0,
+		};
 
 		client->packet_head = client->tail;
 	}
drivers/input/misc/uinput.c +9 -5
@@ -74,12 +74,16 @@ static int uinput_dev_event(struct input
 	struct uinput_device	*udev = input_get_drvdata(dev);
 	struct timespec64	ts;
 
-	udev->buff[udev->head].type = type;
-	udev->buff[udev->head].code = code;
-	udev->buff[udev->head].value = value;
 	ktime_get_ts64(&ts);
-	udev->buff[udev->head].input_event_sec = ts.tv_sec;
-	udev->buff[udev->head].input_event_usec = ts.tv_nsec / NSEC_PER_USEC;
+
+	udev->buff[udev->head] = (struct input_event) {
+		.input_event_sec = ts.tv_sec,
+		.input_event_usec = ts.tv_nsec / NSEC_PER_USEC,
+		.type = type,
+		.code = code,
+		.value = value,
+	};
+
 	udev->head = (udev->head + 1) % UINPUT_BUFFER_SIZE;
 
 	wake_up_interruptible(&udev->waitq);
include/uapi/linux/input.h +1 -0
@@ -34,6 +34,7 @@ struct input_event {
 	__kernel_ulong_t __sec;
 #if defined(__sparc__) && defined(__arch64__)
 	unsigned int __usec;
+	unsigned int __pad;
 #else
 	__kernel_ulong_t __usec;
 #endif
author maintainer
#41 lore raw

PATCH 23/78 drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl

In reply to Greg Kroah-Hartman

From: Matt Roper <[email protected]>

commit a7f3ad37f80d0d5eec9dad156964c0dac800a80e upstream.

Workaround database indicates we should disable clock gating of both the vsunit and hsunit.

Bspec: 33450
Bspec: 33451

Cc Lucas De Marchi <[email protected]>
Cc Matt Atwood <[email protected]>
Cc Radhakrishna Sripada <[email protected]>
(cherry picked from commit b9cf9dac3dac4c1d2a47d34f30ec53c0423cecf8)
---
 drivers/gpu/drm/i915/i915_reg.h |    4 +++-
 drivers/gpu/drm/i915/intel_pm.c |    8 ++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_reg.h +3 -1
@@ -4049,7 +4049,9 @@ enum {
 #define  GWUNIT_CLKGATE_DIS		(1 << 16)
 
 #define UNSLICE_UNIT_LEVEL_CLKGATE	_MMIO(0x9434)
-#define  VFUNIT_CLKGATE_DIS		(1 << 20)
+#define   VFUNIT_CLKGATE_DIS		REG_BIT(20)
+#define   HSUNIT_CLKGATE_DIS		REG_BIT(8)
+#define   VSUNIT_CLKGATE_DIS		REG_BIT(3)
 
 #define INF_UNIT_LEVEL_CLKGATE		_MMIO(0x9560)
 #define   CGPSF_CLKGATE_DIS		(1 << 3)
drivers/gpu/drm/i915/intel_pm.c +8 -0
@@ -9194,6 +9194,14 @@ static void icl_init_clock_gating(struct
 	/* WaEnable32PlaneMode:icl */
 	I915_WRITE(GEN9_CSFE_CHICKEN1_RCS,
 		   _MASKED_BIT_ENABLE(GEN11_ENABLE_32_PLANE_MODE));
+
+	/*
+	 * Wa_1408615072:icl,ehl  (vsunit)
+	 * Wa_1407596294:icl,ehl  (hsunit)
+	 */
+	intel_uncore_rmw(&dev_priv->uncore, UNSLICE_UNIT_LEVEL_CLKGATE,
+			 0, VSUNIT_CLKGATE_DIS | HSUNIT_CLKGATE_DIS);
+
 }
 
 static void cnp_init_clock_gating(struct drm_i915_private *dev_priv)
author maintainer
#42 lore raw

PATCH 24/78 drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu

In reply to Greg Kroah-Hartman

From: Chunming Zhou <[email protected]>

commit db4ff423cd1659580e541a2d4363342f15c14230 upstream.

Can expose it now that the khronos has exposed the vlk extension.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +2 -1
@@ -1422,7 +1422,8 @@ static struct drm_driver kms_driver = {
 	.driver_features =
 	    DRIVER_USE_AGP | DRIVER_ATOMIC |
 	    DRIVER_GEM |
-	    DRIVER_RENDER | DRIVER_MODESET | DRIVER_SYNCOBJ,
+	    DRIVER_RENDER | DRIVER_MODESET | DRIVER_SYNCOBJ |
+	    DRIVER_SYNCOBJ_TIMELINE,
 	.load = amdgpu_driver_load_kms,
 	.open = amdgpu_driver_open_kms,
 	.postclose = amdgpu_driver_postclose_kms,
#43 lore raw

RE: [PATCH 5.4 24/78] drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu

[AMD Public Use]

Quoted 16 lines

-----Original Message-----
From: Greg Kroah-Hartman <[email protected]>
Sent: Tuesday, January 14, 2020 5:01 AM
To: [email protected]
Cc: Greg Kroah-Hartman <[email protected]>; [email protected]; Zhou, David(ChunMing) <[email protected]>; Cui, Flora <[email protected]>; Koenig, Christian <[email protected]>; Deucher, Alexander <[email protected]>
Subject: [PATCH 5.4 24/78] drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu

From: Chunming Zhou <[email protected]>

commit db4ff423cd1659580e541a2d4363342f15c14230 upstream.

Quoted 9 lines

Can expose it now that the khronos has exposed the vlk extension.

This can be dropped for 5.4. According to ChunMing, there is missing functionality in 5.4 so it's not required.

Thanks,

Alex

Quoted 17 lines
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +2 -1
@@ -1422,7 +1422,8 @@ static struct drm_driver kms_driver = {
 	.driver_features =
 	    DRIVER_USE_AGP | DRIVER_ATOMIC |
 	    DRIVER_GEM |
-	    DRIVER_RENDER | DRIVER_MODESET | DRIVER_SYNCOBJ,
+	    DRIVER_RENDER | DRIVER_MODESET | DRIVER_SYNCOBJ |
+	    DRIVER_SYNCOBJ_TIMELINE,
 	.load = amdgpu_driver_load_kms,
 	.open = amdgpu_driver_open_kms,
 	.postclose = amdgpu_driver_postclose_kms,
author maintainer
#44 lore raw

Re: [PATCH 5.4 24/78] drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu

Quoted 28 lines · Alexander

[AMD Public Use]

Quoted 16 lines

-----Original Message-----
From: Greg Kroah-Hartman <[email protected]>
Sent: Tuesday, January 14, 2020 5:01 AM
To: [email protected]
Cc: Greg Kroah-Hartman <[email protected]>; [email protected]; Zhou, David(ChunMing) <[email protected]>; Cui, Flora <[email protected]>; Koenig, Christian <[email protected]>; Deucher, Alexander <[email protected]>
Subject: [PATCH 5.4 24/78] drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu

From: Chunming Zhou <[email protected]>

commit db4ff423cd1659580e541a2d4363342f15c14230 upstream.

Quoted 9 lines

Can expose it now that the khronos has exposed the vlk extension.

Quoted 1 line

This can be dropped for 5.4. According to ChunMing, there is missing functionality in 5.4 so it's not required.

Ok, thanks for letting me know, now dropped.

greg k-h

author maintainer
#45 lore raw

PATCH 25/78 Revert "drm/amdgpu: Set no-retry as default."

In reply to Greg Kroah-Hartman

From: Alex Deucher <[email protected]>

commit 7aec9ec1cf324d5c5a8d17b9c78a34c388e5f17b upstream.

This reverts commit 51bfac71cade386966791a8db87a5912781d249f.

This causes stability issues on some raven boards. Revert for now until a proper fix is completed.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +2 -2
@@ -145,7 +145,7 @@ int amdgpu_async_gfx_ring = 1;
 int amdgpu_mcbp = 0;
 int amdgpu_discovery = -1;
 int amdgpu_mes = 0;
-int amdgpu_noretry = 1;
+int amdgpu_noretry;
 
 struct amdgpu_mgpu_info mgpu_info = {
 	.mutex = __MUTEX_INITIALIZER(mgpu_info.mutex),
@@ -613,7 +613,7 @@ MODULE_PARM_DESC(mes,
 module_param_named(mes, amdgpu_mes, int, 0444);
 
 MODULE_PARM_DESC(noretry,
-	"Disable retry faults (0 = retry enabled, 1 = retry disabled (default))");
+	"Disable retry faults (0 = retry enabled (default), 1 = retry disabled)");
 module_param_named(noretry, amdgpu_noretry, int, 0644);
 
 #ifdef CONFIG_HSA_AMD
author maintainer
#46 lore raw

PATCH 26/78 drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model

In reply to Greg Kroah-Hartman

From: Chen-Yu Tsai <[email protected]>

commit 4396393fb96449c56423fb4b351f76e45a6bcaf6 upstream.

In commit 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.") it was assumed that all TCON variants support a minimum divider of 1 if only DCLK was used.

However, the oldest generation of hardware only supports minimum divider of 4 if only DCLK is used. If a divider of 1 was used on this old hardware, some scrolling artifact would appear. A divider of 2 seemed OK, but a divider of 3 had artifacts as well.

Set the minimum divider when outputing to parallel RGB based on the hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20) hardware, and a minimum of 1 for the rest. A value is not set for the TCON variants lacking channel 0.

This fixes the scrolling artifacts seen on my A13 tablet.

Fixes 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.")
Cc <[email protected]> # 5.4.x
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c |   15 ++++++++++++---
 drivers/gpu/drm/sun4i/sun4i_tcon.h |    1 +
 2 files changed, 13 insertions(+), 3 deletions(-)
drivers/gpu/drm/sun4i/sun4i_tcon.c +12 -3
@@ -488,7 +488,7 @@ static void sun4i_tcon0_mode_set_rgb(str
 
 	WARN_ON(!tcon->quirks->has_channel_0);
 
-	tcon->dclk_min_div = 1;
+	tcon->dclk_min_div = tcon->quirks->dclk_min_div;
 	tcon->dclk_max_div = 127;
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
@@ -1425,12 +1425,14 @@ static int sun8i_r40_tcon_tv_set_mux(str
 static const struct sun4i_tcon_quirks sun4i_a10_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
+	.dclk_min_div		= 4,
 	.set_mux		= sun4i_a10_tcon_set_mux,
 };
 
 static const struct sun4i_tcon_quirks sun5i_a13_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
+	.dclk_min_div		= 4,
 	.set_mux		= sun5i_a13_tcon_set_mux,
 };
 
@@ -1439,6 +1441,7 @@ static const struct sun4i_tcon_quirks su
 	.has_channel_1		= true,
 	.has_lvds_alt		= true,
 	.needs_de_be_mux	= true,
+	.dclk_min_div		= 1,
 	.set_mux		= sun6i_tcon_set_mux,
 };
 
@@ -1446,11 +1449,13 @@ static const struct sun4i_tcon_quirks su
 	.has_channel_0		= true,
 	.has_channel_1		= true,
 	.needs_de_be_mux	= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun7i_a20_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
+	.dclk_min_div		= 4,
 	/* Same display pipeline structure as A10 */
 	.set_mux		= sun4i_a10_tcon_set_mux,
 };
@@ -1458,11 +1463,13 @@ static const struct sun4i_tcon_quirks su
 static const struct sun4i_tcon_quirks sun8i_a33_quirks = {
 	.has_channel_0		= true,
 	.has_lvds_alt		= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun8i_a83t_lcd_quirks = {
 	.supports_lvds		= true,
 	.has_channel_0		= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = {
@@ -1476,11 +1483,13 @@ static const struct sun4i_tcon_quirks su
 
 static const struct sun4i_tcon_quirks sun8i_v3s_quirks = {
 	.has_channel_0		= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun9i_a80_tcon_lcd_quirks = {
-	.has_channel_0	= true,
-	.needs_edp_reset = true,
+	.has_channel_0		= true,
+	.needs_edp_reset	= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun9i_a80_tcon_tv_quirks = {
drivers/gpu/drm/sun4i/sun4i_tcon.h +1 -0
@@ -224,6 +224,7 @@ struct sun4i_tcon_quirks {
 	bool	needs_de_be_mux; /* sun6i needs mux to select backend */
 	bool    needs_edp_reset; /* a80 edp reset needed for tcon0 access */
 	bool	supports_lvds;   /* Does the TCON support an LVDS output? */
+	u8	dclk_min_div;	/* minimum divider for TCON0 DCLK */
 
 	/* callback to handle tcon muxing options */
 	int	(*set_mux)(struct sun4i_tcon *, const struct drm_encoder *);
author maintainer
#47 lore raw

PATCH 27/78 drm/fb-helper: Round up bits_per_pixel if possible

In reply to Greg Kroah-Hartman

From: Geert Uytterhoeven <[email protected]>

commit f30e27779d3031a092c2a177b7fb76adccc45241 upstream.

When userspace requests a video mode parameter value that is not supported, frame buffer device drivers should round it up to a supported value, if possible, instead of just rejecting it. This allows applications to quickly scan for supported video modes.

Currently this rule is not followed for the number of bits per pixel, causing e.g. "fbset -depth N" to fail, if N is smaller than the current number of bits per pixel.

Fix this by returning an error only if bits per pixel is too large, and setting it to the current value otherwise.

See also Documentation/fb/framebuffer.rst, Section 2 (Programmer's View of /dev/fb*").

---
 drivers/gpu/drm/drm_fb_helper.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_fb_helper.c +6 -1
@@ -1320,7 +1320,7 @@ int drm_fb_helper_check_var(struct fb_va
 	 * Changes struct fb_var_screeninfo are currently not pushed back
 	 * to KMS, hence fail if different settings are requested.
 	 */
-	if (var->bits_per_pixel != fb->format->cpp[0] * 8 ||
+	if (var->bits_per_pixel > fb->format->cpp[0] * 8 ||
 	    var->xres > fb->width || var->yres > fb->height ||
 	    var->xres_virtual > fb->width || var->yres_virtual > fb->height) {
 		DRM_DEBUG("fb requested width/height/bpp can't fit in current fb "
@@ -1346,6 +1346,11 @@ int drm_fb_helper_check_var(struct fb_va
 	}
 
 	/*
+	 * Likewise, bits_per_pixel should be rounded up to a supported value.
+	 */
+	var->bits_per_pixel = fb->format->cpp[0] * 8;
+
+	/*
 	 * drm fbdev emulation doesn't support changing the pixel format at all,
 	 * so reject all pixel format changing requests.
 	 */
author maintainer
#48 lore raw

PATCH 28/78 drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ

In reply to Greg Kroah-Hartman

From: Wayne Lin <[email protected]>

commit c4e4fccc5d52d881afaac11d3353265ef4eccb8b upstream.

[Why]
According to DP spec, it should shift left 4 digits for NO_STOP_BIT in REMOTE_I2C_READ message. Not 5 digits.

In current code, NO_STOP_BIT is always set to zero which means I2C master is always generating a I2C stop at the end of each I2C write transaction while handling REMOTE_I2C_READ sideband message. This issue might have the generated I2C signal not meeting the requirement. Take random read in I2C for instance, I2C master should generate a repeat start to start to read data after writing the read address. This issue will cause the I2C master to generate a stop-start rather than a re-start which is not expected in I2C random read.

[How]
Correct the shifting value of NO_STOP_BIT for DP_REMOTE_I2C_READ case in drm_dp_encode_sideband_req().

Changes since v1:(https://patchwork.kernel.org/patch/11312667/)
* Add more descriptions in commit and cc to stable

---
 drivers/gpu/drm/drm_dp_mst_topology.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/drm_dp_mst_topology.c +1 -1
@@ -339,7 +339,7 @@ static void drm_dp_encode_sideband_req(s
 			memcpy(&buf[idx], req->u.i2c_read.transactions[i].bytes, req->u.i2c_read.transactions[i].num_bytes);
 			idx += req->u.i2c_read.transactions[i].num_bytes;
 
-			buf[idx] = (req->u.i2c_read.transactions[i].no_stop_bit & 0x1) << 5;
+			buf[idx] = (req->u.i2c_read.transactions[i].no_stop_bit & 0x1) << 4;
 			buf[idx] |= (req->u.i2c_read.transactions[i].i2c_transaction_delay & 0xf);
 			idx++;
 		}
author maintainer
#49 lore raw

PATCH 29/78 drm/i915: Add Wa_1407352427:icl,ehl

In reply to Greg Kroah-Hartman

From: Matt Roper <[email protected]>

commit 25b79ad51bf04a8aa67b5bccd631fc05f963b8e0 upstream.

The workaround database now indicates we need to disable psdunit clock gating as well.

v3:
- Rebase on top of other workarounds that have landed.
- Restrict cc:stable tag to 5.2+ since that's when ICL was first officially supported.

Bspec: 32354
Bspec: 33450
Bspec: 33451

---
 drivers/gpu/drm/i915/i915_reg.h |    4 ++++
 drivers/gpu/drm/i915/intel_pm.c |    3 +++
 2 files changed, 7 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +4 -0
@@ -4053,6 +4053,10 @@ enum {
 #define   HSUNIT_CLKGATE_DIS		REG_BIT(8)
 #define   VSUNIT_CLKGATE_DIS		REG_BIT(3)
 
+#define UNSLICE_UNIT_LEVEL_CLKGATE2	_MMIO(0x94e4)
+#define   VSUNIT_CLKGATE_DIS_TGL	REG_BIT(19)
+#define   PSDUNIT_CLKGATE_DIS		REG_BIT(5)
+
 #define INF_UNIT_LEVEL_CLKGATE		_MMIO(0x9560)
 #define   CGPSF_CLKGATE_DIS		(1 << 3)
 
drivers/gpu/drm/i915/intel_pm.c +3 -0
@@ -9202,6 +9202,9 @@ static void icl_init_clock_gating(struct
 	intel_uncore_rmw(&dev_priv->uncore, UNSLICE_UNIT_LEVEL_CLKGATE,
 			 0, VSUNIT_CLKGATE_DIS | HSUNIT_CLKGATE_DIS);
 
+	/* Wa_1407352427:icl,ehl */
+	intel_uncore_rmw(&dev_priv->uncore, UNSLICE_UNIT_LEVEL_CLKGATE2,
+			 0, PSDUNIT_CLKGATE_DIS);
 }
 
 static void cnp_init_clock_gating(struct drm_i915_private *dev_priv)
author maintainer
#50 lore raw

PATCH 30/78 drm/i915/gt: Mark up virtual engine uabi_instance

In reply to Greg Kroah-Hartman

From: Chris Wilson <[email protected]>

commit 1325008f5c8dbc84aa835d98af8447fa0569bc4d upstream.

Be sure to initialise the uabi_instance on the virtual engine to the special invalid value, just in case we ever peek at it from the uAPI.

Fixes 750e76b4f9f6 ("drm/i915/gt: Move the [class][inst] lookup for engines onto the GT")
Cc Tvrtko Ursulin <[email protected]>
Cc <[email protected]> # v5.4+
(cherry picked from commit f75fc37b5e70b75f21550410f88e2379648120e2)
---
 drivers/gpu/drm/i915/gt/intel_lrc.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/i915/gt/intel_lrc.c +2 -0
@@ -3716,9 +3716,11 @@ intel_execlists_create_virtual(struct i9
 	ve->base.i915 = ctx->i915;
 	ve->base.gt = siblings[0]->gt;
 	ve->base.id = -1;
+
 	ve->base.class = OTHER_CLASS;
 	ve->base.uabi_class = I915_ENGINE_CLASS_INVALID;
 	ve->base.instance = I915_ENGINE_CLASS_INVALID_VIRTUAL;
+	ve->base.uabi_instance = I915_ENGINE_CLASS_INVALID_VIRTUAL;
 
 	/*
 	 * The decision on whether to submit a request using semaphores
author maintainer
#51 lore raw

PATCH 31/78 IB/hfi1: Adjust flow PSN with the correct resync_psn

In reply to Greg Kroah-Hartman

From: Kaike Wan <[email protected]>

commit b2ff0d510182eb5cc05a65d1b2371af62c4b170c upstream.

When a TID RDMA ACK to RESYNC request is received, the flow PSNs for pending TID RDMA WRITE segments will be adjusted with the next flow generation number, based on the resync_psn value extracted from the flow PSN of the TID RDMA ACK packet. The resync_psn value indicates the last flow PSN for which a TID RDMA WRITE DATA packet has been received by the responder and the requester should resend TID RDMA WRITE DATA packets, starting from the next flow PSN.

However, if resync_psn points to the last flow PSN for a segment and the next segment flow PSN starts with a new generation number, use of the old resync_psn to adjust the flow PSN for the next segment will lead to miscalculation, resulting in WARN_ON and sge rewinding errors:

  WARNING: CPU: 4 PID: 146961 at /nfs/site/home/phcvs2/gitrepo/ifs-all/components/Drivers/tmp/rpmbuild/BUILD/ifs-kernel-updates-3.10.0_957.el7.x86_64/hfi1/tid_rdma.c:4764 hfi1_rc_rcv_tid_rdma_ack+0x8f6/0xa90 [hfi1]
  Modules linked in: ib_ipoib(OE) hfi1(OE) rdmavt(OE) rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfsv3 nfs_acl nfs lockd grace fscache iTCO_wdt iTCO_vendor_support skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm irqbypass crc32_pclmul ghash_clmulni_intel ib_isert iscsi_target_mod target_core_mod aesni_intel lrw gf128mul glue_helper ablk_helper cryptd rpcrdma sunrpc opa_vnic ast ttm ib_iser libiscsi drm_kms_helper scsi_transport_iscsi ipmi_ssif syscopyarea sysfillrect sysimgblt fb_sys_fops drm joydev ipmi_si pcspkr sg drm_panel_orientation_quirks ipmi_devintf lpc_ich i2c_i801 ipmi_msghandler wmi rdma_ucm ib_ucm ib_uverbs acpi_cpufreq acpi_power_meter ib_umad rdma_cm ib_cm iw_cm ip_tables ext4 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul i2c_algo_bit crct10dif_common
   crc32c_intel e1000e ib_core ahci libahci ptp libata pps_core nfit libnvdimm [last unloaded: rdmavt]
  CPU: 4 PID: 146961 Comm: kworker/4:0H Kdump: loaded Tainted: G        W  OE  ------------   3.10.0-957.el7.x86_64 #1
  Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.0X.02.0117.040420182310 04/04/2018
  Workqueue: hfi0_0 _hfi1_do_tid_send [hfi1]
  Call Trace:
   <IRQ>  [<ffffffff9e361dc1>] dump_stack+0x19/0x1b
   [<ffffffff9dc97648>] __warn+0xd8/0x100
   [<ffffffff9dc9778d>] warn_slowpath_null+0x1d/0x20
   [<ffffffffc05d28c6>] hfi1_rc_rcv_tid_rdma_ack+0x8f6/0xa90 [hfi1]
   [<ffffffffc05c21cc>] hfi1_kdeth_eager_rcv+0x1dc/0x210 [hfi1]
   [<ffffffffc05c23ef>] ? hfi1_kdeth_expected_rcv+0x1ef/0x210 [hfi1]
   [<ffffffffc0574f15>] kdeth_process_eager+0x35/0x90 [hfi1]
   [<ffffffffc0575b5a>] handle_receive_interrupt_nodma_rtail+0x17a/0x2b0 [hfi1]
   [<ffffffffc056a623>] receive_context_interrupt+0x23/0x40 [hfi1]
   [<ffffffff9dd4a294>] __handle_irq_event_percpu+0x44/0x1c0
   [<ffffffff9dd4a442>] handle_irq_event_percpu+0x32/0x80
   [<ffffffff9dd4a4cc>] handle_irq_event+0x3c/0x60
   [<ffffffff9dd4d27f>] handle_edge_irq+0x7f/0x150
   [<ffffffff9dc2e554>] handle_irq+0xe4/0x1a0
   [<ffffffff9e3795dd>] do_IRQ+0x4d/0xf0
   [<ffffffff9e36b362>] common_interrupt+0x162/0x162
   <EOI>  [<ffffffff9dfa0f79>] ? swiotlb_map_page+0x49/0x150
   [<ffffffffc05c2ed1>] hfi1_verbs_send_dma+0x291/0xb70 [hfi1]
   [<ffffffffc05c2c40>] ? hfi1_wait_kmem+0xf0/0xf0 [hfi1]
   [<ffffffffc05c3f26>] hfi1_verbs_send+0x126/0x2b0 [hfi1]
   [<ffffffffc05ce683>] _hfi1_do_tid_send+0x1d3/0x320 [hfi1]
   [<ffffffff9dcb9d4f>] process_one_work+0x17f/0x440
   [<ffffffff9dcbade6>] worker_thread+0x126/0x3c0
   [<ffffffff9dcbacc0>] ? manage_workers.isra.25+0x2a0/0x2a0
   [<ffffffff9dcc1c31>] kthread+0xd1/0xe0
   [<ffffffff9dcc1b60>] ? insert_kthread_work+0x40/0x40
   [<ffffffff9e374c1d>] ret_from_fork_nospec_begin+0x7/0x21
   [<ffffffff9dcc1b60>] ? insert_kthread_work+0x40/0x40

This patch fixes the issue by adjusting the resync_psn first if the flow generation has been advanced for a pending segment.

---
 drivers/infiniband/hw/hfi1/tid_rdma.c |    9 +++++++++
 1 file changed, 9 insertions(+)
drivers/infiniband/hw/hfi1/tid_rdma.c +9 -0
@@ -4633,6 +4633,15 @@ void hfi1_rc_rcv_tid_rdma_ack(struct hfi
 			 */
 			fpsn = full_flow_psn(flow, flow->flow_state.spsn);
 			req->r_ack_psn = psn;
+			/*
+			 * If resync_psn points to the last flow PSN for a
+			 * segment and the new segment (likely from a new
+			 * request) starts with a new generation number, we
+			 * need to adjust resync_psn accordingly.
+			 */
+			if (flow->flow_state.generation !=
+			    (resync_psn >> HFI1_KDETH_BTH_SEQ_SHIFT))
+				resync_psn = mask_psn(fpsn - 1);
 			flow->resync_npkts +=
 				delta_psn(mask_psn(resync_psn + 1), fpsn);
 			/*
author maintainer
#52 lore raw

PATCH 32/78 can: kvaser_usb: fix interface sanity check

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 5660493c637c9d83786f1c9297f403eae44177b6 upstream.

Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface.

Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Cc stable <[email protected]> # 4.19
Cc Jimmy Assarsson <[email protected]>
Cc Christer Beskow <[email protected]>
Cc Nicklas Johansson <[email protected]>
Cc Martin Henriksson <[email protected]>
---
 drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c |    2 +-
 drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c  |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c +1 -1
@@ -1590,7 +1590,7 @@ static int kvaser_usb_hydra_setup_endpoi
 	struct usb_endpoint_descriptor *ep;
 	int i;
 
-	iface_desc = &dev->intf->altsetting[0];
+	iface_desc = dev->intf->cur_altsetting;
 
 	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 		ep = &iface_desc->endpoint[i].desc;
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +1 -1
@@ -1310,7 +1310,7 @@ static int kvaser_usb_leaf_setup_endpoin
 	struct usb_endpoint_descriptor *endpoint;
 	int i;
 
-	iface_desc = &dev->intf->altsetting[0];
+	iface_desc = dev->intf->cur_altsetting;
 
 	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 		endpoint = &iface_desc->endpoint[i].desc;
author maintainer
#53 lore raw

PATCH 33/78 can: gs_usb: gs_usb_probe(): use descriptors of current altsetting

In reply to Greg Kroah-Hartman

From: Johan Hovold <[email protected]>

commit 2f361cd9474ab2c4ab9ac8db20faf81e66c6279b upstream.

Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings.

Fixes d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
---
 drivers/net/can/usb/gs_usb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/can/usb/gs_usb.c +2 -2
@@ -918,7 +918,7 @@ static int gs_usb_probe(struct usb_inter
 			     GS_USB_BREQ_HOST_FORMAT,
 			     USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
 			     1,
-			     intf->altsetting[0].desc.bInterfaceNumber,
+			     intf->cur_altsetting->desc.bInterfaceNumber,
 			     hconf,
 			     sizeof(*hconf),
 			     1000);
@@ -941,7 +941,7 @@ static int gs_usb_probe(struct usb_inter
 			     GS_USB_BREQ_DEVICE_CONFIG,
 			     USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
 			     1,
-			     intf->altsetting[0].desc.bInterfaceNumber,
+			     intf->cur_altsetting->desc.bInterfaceNumber,
 			     dconf,
 			     sizeof(*dconf),
 			     1000);
author maintainer
#54 lore raw

PATCH 34/78 can: tcan4x5x: tcan4x5x_can_probe(): get the device out of standby before register access

In reply to Greg Kroah-Hartman

From: Sean Nyekjaer <[email protected]>

commit 3069ce620daed85e4ef2b0c087dca2509f809470 upstream.

The m_can tries to detect if Non ISO Operation is available while in standby mode, this function results in the following error:

| tcan4x5x spi2.0 (unnamed net_device) (uninitialized): Failed to init module
| tcan4x5x spi2.0: m_can device registered (irq=84, version=32)
| tcan4x5x spi2.0 can2: TCAN4X5X successfully initialized.

When the tcan device comes out of reset it goes in standby mode. The m_can driver tries to access the control register but fails due to the device being in standby mode.

So this patch will put the tcan device in normal mode before the m_can driver does the initialization.

Fixes 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
---
 drivers/net/can/m_can/tcan4x5x.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/net/can/m_can/tcan4x5x.c +4 -0
@@ -445,6 +445,10 @@ static int tcan4x5x_can_probe(struct spi
 
 	tcan4x5x_power_enable(priv->power, 1);
 
+	ret = tcan4x5x_init(mcan_class);
+	if (ret)
+		goto out_power;
+
 	ret = m_can_class_register(mcan_class);
 	if (ret)
 		goto out_power;
author maintainer
#55 lore raw

PATCH 35/78 can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling to irq mode

In reply to Greg Kroah-Hartman

From: Florian Faber <[email protected]>

commit 2d77bd61a2927be8f4e00d9478fe6996c47e8d45 upstream.

Under load, the RX side of the mscan driver can get stuck while TX still works. Restarting the interface locks up the system. This behaviour could be reproduced reliably on a MPC5121e based system.

The patch fixes the return value of the NAPI polling function (should be the number of processed packets, not constant 1) and the condition under which IRQs are enabled again after polling is finished.

With this patch, no more lockups were observed over a test period of ten days.

Fixes afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan")
Cc linux-stable <[email protected]>
---
 drivers/net/can/mscan/mscan.c |   21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)
drivers/net/can/mscan/mscan.c +10 -11
@@ -381,13 +381,12 @@ static int mscan_rx_poll(struct napi_str
 	struct net_device *dev = napi->dev;
 	struct mscan_regs __iomem *regs = priv->reg_base;
 	struct net_device_stats *stats = &dev->stats;
-	int npackets = 0;
-	int ret = 1;
+	int work_done = 0;
 	struct sk_buff *skb;
 	struct can_frame *frame;
 	u8 canrflg;
 
-	while (npackets < quota) {
+	while (work_done < quota) {
 		canrflg = in_8(&regs->canrflg);
 		if (!(canrflg & (MSCAN_RXF | MSCAN_ERR_IF)))
 			break;
@@ -408,18 +407,18 @@ static int mscan_rx_poll(struct napi_str
 
 		stats->rx_packets++;
 		stats->rx_bytes += frame->can_dlc;
-		npackets++;
+		work_done++;
 		netif_receive_skb(skb);
 	}
 
-	if (!(in_8(&regs->canrflg) & (MSCAN_RXF | MSCAN_ERR_IF))) {
-		napi_complete(&priv->napi);
-		clear_bit(F_RX_PROGRESS, &priv->flags);
-		if (priv->can.state < CAN_STATE_BUS_OFF)
-			out_8(&regs->canrier, priv->shadow_canrier);
-		ret = 0;
+	if (work_done < quota) {
+		if (likely(napi_complete_done(&priv->napi, work_done))) {
+			clear_bit(F_RX_PROGRESS, &priv->flags);
+			if (priv->can.state < CAN_STATE_BUS_OFF)
+				out_8(&regs->canrier, priv->shadow_canrier);
+		}
 	}
-	return ret;
+	return work_done;
 }
 
 static irqreturn_t mscan_isr(int irq, void *dev_id)
author maintainer
#56 lore raw

PATCH 36/78 can: can_dropped_invalid_skb(): ensure an initialized headroom in outgoing CAN sk_buffs

In reply to Greg Kroah-Hartman

From: Oliver Hartkopp <[email protected]>

commit e7153bf70c3496bac00e7e4f395bb8d8394ac0ea upstream.

KMSAN sysbot detected a read access to an untinitialized value in the headroom of an outgoing CAN related sk_buff. When using CAN sockets this area is filled appropriately - but when using a packet socket this initialization is missing.

The problematic read access occurs in the CAN receive path which can only be triggered when the sk_buff is sent through a (virtual) CAN interface. So we check in the sending path whether we need to perform the missing initializations.

Fixes d3b58c47d330d ("can: replace timestamp as unique skb attribute")
Reported-by [email protected]
Cc linux-stable <[email protected]> # >= v4.1
---
 include/linux/can/dev.h |   34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)
include/linux/can/dev.h +34 -0
@@ -18,6 +18,7 @@
 #include <linux/can/error.h>
 #include <linux/can/led.h>
 #include <linux/can/netlink.h>
+#include <linux/can/skb.h>
 #include <linux/netdevice.h>
 
 /*
@@ -91,6 +92,36 @@ struct can_priv {
 #define get_can_dlc(i)		(min_t(__u8, (i), CAN_MAX_DLC))
 #define get_canfd_dlc(i)	(min_t(__u8, (i), CANFD_MAX_DLC))
 
+/* Check for outgoing skbs that have not been created by the CAN subsystem */
+static inline bool can_skb_headroom_valid(struct net_device *dev,
+					  struct sk_buff *skb)
+{
+	/* af_packet creates a headroom of HH_DATA_MOD bytes which is fine */
+	if (WARN_ON_ONCE(skb_headroom(skb) < sizeof(struct can_skb_priv)))
+		return false;
+
+	/* af_packet does not apply CAN skb specific settings */
+	if (skb->ip_summed == CHECKSUM_NONE) {
+		/* init headroom */
+		can_skb_prv(skb)->ifindex = dev->ifindex;
+		can_skb_prv(skb)->skbcnt = 0;
+
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+		/* preform proper loopback on capable devices */
+		if (dev->flags & IFF_ECHO)
+			skb->pkt_type = PACKET_LOOPBACK;
+		else
+			skb->pkt_type = PACKET_HOST;
+
+		skb_reset_mac_header(skb);
+		skb_reset_network_header(skb);
+		skb_reset_transport_header(skb);
+	}
+
+	return true;
+}
+
 /* Drop a given socketbuffer if it does not contain a valid CAN frame. */
 static inline bool can_dropped_invalid_skb(struct net_device *dev,
 					  struct sk_buff *skb)
@@ -108,6 +139,9 @@ static inline bool can_dropped_invalid_s
 	} else
 		goto inval_skb;
 
+	if (!can_skb_headroom_valid(dev, skb))
+		goto inval_skb;
+
 	return false;
 
 inval_skb:
author maintainer
#57 lore raw

PATCH 37/78 gpiolib: acpi: Turn dmi_system_id table into a generic quirk table

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

commit 1ad1b54099c231aed8f6f257065c1b322583f264 upstream.

Turn the existing run_edge_events_on_boot_blacklist dmi_system_id table into a generic quirk table, storing the quirks in the driver_data ptr.

This is a preparation patch for adding other types of (DMI based) quirks.

---
 drivers/gpio/gpiolib-acpi.c |   19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)
drivers/gpio/gpiolib-acpi.c +15 -4
@@ -21,6 +21,8 @@
 #include "gpiolib.h"
 #include "gpiolib-acpi.h"
 
+#define QUIRK_NO_EDGE_EVENTS_ON_BOOT		0x01l
+
 static int run_edge_events_on_boot = -1;
 module_param(run_edge_events_on_boot, int, 0444);
 MODULE_PARM_DESC(run_edge_events_on_boot,
@@ -1302,7 +1304,7 @@ static int acpi_gpio_handle_deferred_req
 /* We must use _sync so that this runs after the first deferred_probe run */
 late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);
 
-static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = {
+static const struct dmi_system_id gpiolib_acpi_quirks[] = {
 	{
 		/*
 		 * The Minix Neo Z83-4 has a micro-USB-B id-pin handler for
@@ -1312,7 +1314,8 @@ static const struct dmi_system_id run_ed
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
-		}
+		},
+		.driver_data = (void *)QUIRK_NO_EDGE_EVENTS_ON_BOOT,
 	},
 	{
 		/*
@@ -1324,15 +1327,23 @@ static const struct dmi_system_id run_ed
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Wortmann_AG"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "TERRA_PAD_1061"),
-		}
+		},
+		.driver_data = (void *)QUIRK_NO_EDGE_EVENTS_ON_BOOT,
 	},
 	{} /* Terminating entry */
 };
 
 static int acpi_gpio_setup_params(void)
 {
+	const struct dmi_system_id *id;
+	long quirks = 0;
+
+	id = dmi_first_match(gpiolib_acpi_quirks);
+	if (id)
+		quirks = (long)id->driver_data;
+
 	if (run_edge_events_on_boot < 0) {
-		if (dmi_check_system(run_edge_events_on_boot_blacklist))
+		if (quirks & QUIRK_NO_EDGE_EVENTS_ON_BOOT)
 			run_edge_events_on_boot = 0;
 		else
 			run_edge_events_on_boot = 1;
author maintainer
#58 lore raw

PATCH 38/78 gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism

In reply to Greg Kroah-Hartman

From: Hans de Goede <[email protected]>

commit aa23ca3d98f756d5b1e503fb140665fb24a41a38 upstream.

On some laptops enabling wakeup on the GPIO interrupts used for ACPI _AEI event handling causes spurious wakeups.

This commit adds a new honor_wakeup option, defaulting to true (our current behavior), which can be used to disable wakeup on troublesome hardware to avoid these spurious wakeups.

This is a workaround for an architectural problem with s2idle under Linux where we do not have any mechanism to immediately go back to sleep after wakeup events, other then for embedded-controller events using the standard ACPI EC interface, for details see:
https://lore.kernel.org/linux-acpi/[email protected]/

One series of laptops which is not able to suspend without this workaround is the HP x2 10 Cherry Trail models, this commit adds a DMI based quirk which makes sets honor_wakeup to false on these models.

---
 drivers/gpio/gpiolib-acpi.c |   32 +++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)
drivers/gpio/gpiolib-acpi.c +31 -1
@@ -22,12 +22,18 @@
 #include "gpiolib-acpi.h"
 
 #define QUIRK_NO_EDGE_EVENTS_ON_BOOT		0x01l
+#define QUIRK_NO_WAKEUP				0x02l
 
 static int run_edge_events_on_boot = -1;
 module_param(run_edge_events_on_boot, int, 0444);
 MODULE_PARM_DESC(run_edge_events_on_boot,
 		 "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto");
 
+static int honor_wakeup = -1;
+module_param(honor_wakeup, int, 0444);
+MODULE_PARM_DESC(honor_wakeup,
+		 "Honor the ACPI wake-capable flag: 0=no, 1=yes, -1=auto");
+
 /**
  * struct acpi_gpio_event - ACPI GPIO event handler data
  *
@@ -276,7 +282,7 @@ static acpi_status acpi_gpiochip_alloc_e
 	event->handle = evt_handle;
 	event->handler = handler;
 	event->irq = irq;
-	event->irq_is_wake = agpio->wake_capable == ACPI_WAKE_CAPABLE;
+	event->irq_is_wake = honor_wakeup && agpio->wake_capable == ACPI_WAKE_CAPABLE;
 	event->pin = pin;
 	event->desc = desc;
 
@@ -1330,6 +1336,23 @@ static const struct dmi_system_id gpioli
 		},
 		.driver_data = (void *)QUIRK_NO_EDGE_EVENTS_ON_BOOT,
 	},
+	{
+		/*
+		 * Various HP X2 10 Cherry Trail models use an external
+		 * embedded-controller connected via I2C + an ACPI GPIO
+		 * event handler. The embedded controller generates various
+		 * spurious wakeup events when suspended. So disable wakeup
+		 * for its handler (it uses the only ACPI GPIO event handler).
+		 * This breaks wakeup when opening the lid, the user needs
+		 * to press the power-button to wakeup the system. The
+		 * alternative is suspend simply not working, which is worse.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP x2 Detachable 10-p0XX"),
+		},
+		.driver_data = (void *)QUIRK_NO_WAKEUP,
+	},
 	{} /* Terminating entry */
 };
 
@@ -1349,6 +1372,13 @@ static int acpi_gpio_setup_params(void)
 			run_edge_events_on_boot = 1;
 	}
 
+	if (honor_wakeup < 0) {
+		if (quirks & QUIRK_NO_WAKEUP)
+			honor_wakeup = 0;
+		else
+			honor_wakeup = 1;
+	}
+
 	return 0;
 }
 
author maintainer
#59 lore raw

PATCH 39/78 pstore/ram: Regularize prz label allocation lifetime

In reply to Greg Kroah-Hartman

From: Kees Cook <[email protected]>

commit e163fdb3f7f8c62dccf194f3f37a7bcb3c333aa8 upstream.

In my attempt to fix a memory leak, I introduced a double-free in the pstore error path. Instead of trying to manage the allocation lifetime between persistent_ram_new() and its callers, adjust the logic so persistent_ram_new() always takes a kstrdup() copy, and leaves the caller's allocation lifetime up to the caller. Therefore callers are _always_ responsible for freeing their label. Before, it only needed freeing when the prz itself failed to allocate, and not in any of the other prz failure cases, which callers would have no visibility into, which is the root design problem that lead to both the leak and now double-free bugs.

Fixes 8df955a32a73 ("pstore/ram: Fix error-path memory leak in persistent_ram_new() callers")
---
 fs/pstore/ram.c      |    4 ++--
 fs/pstore/ram_core.c |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
fs/pstore/ram.c +2 -2
@@ -583,12 +583,12 @@ static int ramoops_init_przs(const char
 		prz_ar[i] = persistent_ram_new(*paddr, zone_sz, sig,
 					       &cxt->ecc_info,
 					       cxt->memtype, flags, label);
+		kfree(label);
 		if (IS_ERR(prz_ar[i])) {
 			err = PTR_ERR(prz_ar[i]);
 			dev_err(dev, "failed to request %s mem region (0x%zx@0x%llx): %d\n",
 				name, record_size,
 				(unsigned long long)*paddr, err);
-			kfree(label);
 
 			while (i > 0) {
 				i--;
@@ -629,12 +629,12 @@ static int ramoops_init_prz(const char *
 	label = kasprintf(GFP_KERNEL, "ramoops:%s", name);
 	*prz = persistent_ram_new(*paddr, sz, sig, &cxt->ecc_info,
 				  cxt->memtype, PRZ_FLAG_ZAP_OLD, label);
+	kfree(label);
 	if (IS_ERR(*prz)) {
 		int err = PTR_ERR(*prz);
 
 		dev_err(dev, "failed to request %s mem region (0x%zx@0x%llx): %d\n",
 			name, sz, (unsigned long long)*paddr, err);
-		kfree(label);
 		return err;
 	}
 
fs/pstore/ram_core.c +1 -1
@@ -574,7 +574,7 @@ struct persistent_ram_zone *persistent_r
 	/* Initialize general buffer state. */
 	raw_spin_lock_init(&prz->buffer_lock);
 	prz->flags = flags;
-	prz->label = label;
+	prz->label = kstrdup(label, GFP_KERNEL);
 
 	ret = persistent_ram_buffer_map(start, size, prz, memtype);
 	if (ret)
author maintainer
#60 lore raw

PATCH 40/78 staging: vt6656: set usb_set_intfdata on driver fail.

In reply to Greg Kroah-Hartman

From: Malcolm Priestley <[email protected]>

commit c0bcf9f3f5b661d4ace2a64a79ef661edd2a4dc8 upstream.

intfdata will contain stale pointer when the device is detached after failed initialization when referenced in vt6656_disconnect

Provide driver access to it here and NULL it.

---
 drivers/staging/vt6656/device.h   |    1 +
 drivers/staging/vt6656/main_usb.c |    1 +
 drivers/staging/vt6656/wcmd.c     |    1 +
 3 files changed, 3 insertions(+)
drivers/staging/vt6656/device.h +1 -0
@@ -259,6 +259,7 @@ struct vnt_private {
 	u8 mac_hw;
 	/* netdev */
 	struct usb_device *usb;
+	struct usb_interface *intf;
 
 	u64 tsf_time;
 	u8 rx_rate;
drivers/staging/vt6656/main_usb.c +1 -0
@@ -993,6 +993,7 @@ vt6656_probe(struct usb_interface *intf,
 	priv = hw->priv;
 	priv->hw = hw;
 	priv->usb = udev;
+	priv->intf = intf;
 
 	vnt_set_options(priv);
 
drivers/staging/vt6656/wcmd.c +1 -0
@@ -99,6 +99,7 @@ void vnt_run_command(struct work_struct
 		if (vnt_init(priv)) {
 			/* If fail all ends TODO retry */
 			dev_err(&priv->usb->dev, "failed to start\n");
+			usb_set_intfdata(priv->intf, NULL);
 			ieee80211_free_hw(priv->hw);
 			return;
 		}
author maintainer
#61 lore raw

PATCH 41/78 staging: vt6656: Fix non zero logical return of, usb_control_msg

In reply to Greg Kroah-Hartman

From: Malcolm Priestley <[email protected]>

commit 58c3e681b04dd57c70d0dcb7b69fe52d043ff75a upstream.

Starting with commit 59608cb1de1856
("staging: vt6656: clean function's error path in usbpipe.c") the usb control functions have returned errors throughout driver with only logical variable checking.

However, usb_control_msg return the amount of bytes transferred this means that normal operation causes errors.

Correct the return function so only return zero when transfer is successful.

---
 drivers/staging/vt6656/usbpipe.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/staging/vt6656/usbpipe.c +6 -2
@@ -59,7 +59,9 @@ int vnt_control_out(struct vnt_private *
 
 	kfree(usb_buffer);
 
-	if (ret >= 0 && ret < (int)length)
+	if (ret == (int)length)
+		ret = 0;
+	else
 		ret = -EIO;
 
 end_unlock:
@@ -103,7 +105,9 @@ int vnt_control_in(struct vnt_private *p
 
 	kfree(usb_buffer);
 
-	if (ret >= 0 && ret < (int)length)
+	if (ret == (int)length)
+		ret = 0;
+	else
 		ret = -EIO;
 
 end_unlock:
author maintainer
#62 lore raw

PATCH 42/78 usb: cdns3: should not use the same dev_id for shared interrupt handler

In reply to Greg Kroah-Hartman

From: Peter Chen <[email protected]>

commit af58e1fca9840192f14b6f03c59595d64bff9127 upstream.

Both drd and gadget interrupt handler use the struct cdns3 pointer as dev_id, it causes devm_free_irq at cdns3_gadget_exit doesn't free gadget's interrupt handler, it freed drd's handler. So, when the host interrupt occurs, the gadget's interrupt hanlder is still called, and causes below oops. To fix it, we use gadget's private data priv_dev as interrupt dev_id for gadget.

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000380

Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000971d79000 [0000000000000380] pgd=0000000971d6f003, pud=0000000971d6e003, pmd=0000000000000000

Internal error: Oops: 96000006 [#1] PREEMPT SMP
Modules linked in: mxc_jpeg_encdec crct10dif_ce fsl_imx8_ddr_perf
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-03486-g69f4e7d9c54a-dirty #254
Hardware name: Freescale i.MX8QM MEK (DT)
pstate: 00000085 (nzcv daIf -PAN -UAO)
pc : cdns3_device_irq_handler+0x1c/0xb8
lr : __handle_irq_event_percpu+0x78/0x2c0

sp : ffff800010003e30
x29: ffff800010003e30 x28: ffff8000129bb000
x27: ffff8000126e9000 x26: ffff0008f61b5600
x25: ffff800011fe1018 x24: ffff8000126ea120
x23: ffff800010003f04 x22: 0000000000000000
x21: 0000000000000093 x20: ffff0008f61b5600
x19: ffff0008f5061a80 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 003d090000000000
x13: 00003d0900000000 x12: 0000000000000000
x11: 00003d0900000000 x10: 0000000000000040
x9 : ffff800012708cb8 x8 : ffff800012708cb0
x7 : ffff0008f7c7a9d0 x6 : 0000000000000000
x5 : ffff0008f7c7a910 x4 : ffff8008ed359000
x3 : ffff800010003f40 x2 : 0000000000000000
x1 : ffff0008f5061a80 x0 : ffff800010161a60

Call trace:
 cdns3_device_irq_handler+0x1c/0xb8
 __handle_irq_event_percpu+0x78/0x2c0
 handle_irq_event_percpu+0x40/0x98
 handle_irq_event+0x4c/0xd0
 handle_fasteoi_irq+0xbc/0x168
 generic_handle_irq+0x34/0x50
 __handle_domain_irq+0x6c/0xc0
 gic_handle_irq+0xd4/0x174
 el1_irq+0xb8/0x180
 arch_cpu_idle+0x3c/0x230
 default_idle_call+0x38/0x40
 do_idle+0x20c/0x298
 cpu_startup_entry+0x28/0x48
 rest_init+0xdc/0xe8
 arch_call_rest_init+0x14/0x1c
 start_kernel+0x48c/0x4b8
Code: aa0103f3 aa1e03e0 d503201f f9409662 (f941c040)
---[ end trace 091dcf4dee011b0e ]---
Kernel panic - not syncing: Fatal exception in interrupt

SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0002,2100600c
Memory Limit: none

---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Fixes 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
---
 drivers/usb/cdns3/gadget.c |   14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)
drivers/usb/cdns3/gadget.c +5 -9
@@ -1375,13 +1375,10 @@ static void cdns3_check_usb_interrupt_pr
  */
 static irqreturn_t cdns3_device_irq_handler(int irq, void *data)
 {
-	struct cdns3_device *priv_dev;
-	struct cdns3 *cdns = data;
+	struct cdns3_device *priv_dev = data;
 	irqreturn_t ret = IRQ_NONE;
 	u32 reg;
 
-	priv_dev = cdns->gadget_dev;
-
 	/* check USB device interrupt */
 	reg = readl(&priv_dev->regs->usb_ists);
 	if (reg) {
@@ -1419,14 +1416,12 @@ static irqreturn_t cdns3_device_irq_hand
  */
 static irqreturn_t cdns3_device_thread_irq_handler(int irq, void *data)
 {
-	struct cdns3_device *priv_dev;
-	struct cdns3 *cdns = data;
+	struct cdns3_device *priv_dev = data;
 	irqreturn_t ret = IRQ_NONE;
 	unsigned long flags;
 	int bit;
 	u32 reg;
 
-	priv_dev = cdns->gadget_dev;
 	spin_lock_irqsave(&priv_dev->lock, flags);
 
 	reg = readl(&priv_dev->regs->usb_ists);
@@ -2539,7 +2534,7 @@ void cdns3_gadget_exit(struct cdns3 *cdn
 
 	priv_dev = cdns->gadget_dev;
 
-	devm_free_irq(cdns->dev, cdns->dev_irq, cdns);
+	devm_free_irq(cdns->dev, cdns->dev_irq, priv_dev);
 
 	pm_runtime_mark_last_busy(cdns->dev);
 	pm_runtime_put_autosuspend(cdns->dev);
@@ -2710,7 +2705,8 @@ static int __cdns3_gadget_init(struct cd
 	ret = devm_request_threaded_irq(cdns->dev, cdns->dev_irq,
 					cdns3_device_irq_handler,
 					cdns3_device_thread_irq_handler,
-					IRQF_SHARED, dev_name(cdns->dev), cdns);
+					IRQF_SHARED, dev_name(cdns->dev),
+					cdns->gadget_dev);
 
 	if (ret)
 		goto err0;
author maintainer
#63 lore raw

PATCH 43/78 usb: ohci-da8xx: ensure error return on variable error is set

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

commit ba9b40810bb43e6bf73b395012b98633c03f7f59 upstream.

Currently when an error occurs when calling devm_gpiod_get_optional or calling gpiod_to_irq it causes an uninitialized error return in variable 'error' to be returned. Fix this by ensuring the error variable is set from da8xx_ohci->oc_gpio and oc_irq.

Thanks to Dan Carpenter for spotting the uninitialized error in the gpiod_to_irq failure case.

Addresses-Coverity: ("Uninitialized scalar variable")

Fixes d193abf1c913 ("usb: ohci-da8xx: add vbus and overcurrent gpios")
Cc stable <[email protected]>
---
 drivers/usb/host/ohci-da8xx.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/usb/host/ohci-da8xx.c +6 -2
@@ -415,13 +415,17 @@ static int ohci_da8xx_probe(struct platf
 	}
 
 	da8xx_ohci->oc_gpio = devm_gpiod_get_optional(dev, "oc", GPIOD_IN);
-	if (IS_ERR(da8xx_ohci->oc_gpio))
+	if (IS_ERR(da8xx_ohci->oc_gpio)) {
+		error = PTR_ERR(da8xx_ohci->oc_gpio);
 		goto err;
+	}
 
 	if (da8xx_ohci->oc_gpio) {
 		oc_irq = gpiod_to_irq(da8xx_ohci->oc_gpio);
-		if (oc_irq < 0)
+		if (oc_irq < 0) {
+			error = oc_irq;
 			goto err;
+		}
 
 		error = devm_request_threaded_irq(dev, oc_irq, NULL,
 				ohci_da8xx_oc_thread, IRQF_TRIGGER_RISING |
author maintainer
#64 lore raw

PATCH 44/78 USB-PD tcpm: bad warning+size, PPS adapters

In reply to Greg Kroah-Hartman

From: Douglas Gilbert <[email protected]>

commit c215e48e97d232249a33849fc46fc50311043e11 upstream.

Augmented Power Delivery Objects (A)PDO_s are used by USB-C PD power adapters to advertize the voltages and currents they support. There can be up to 7 PDO_s but before PPS (programmable power supply) there were seldom more than 4 or 5. Recently Samsung released an optional PPS 45 Watt power adapter (EP-TA485) that has 7 PDO_s. It is for the Galaxy 10+ tablet and charges it quicker than the adapter supplied at purchase. The EP-TA485 causes an overzealous WARN_ON to soil the log plus it miscalculates the number of bytes to read.

So this bug has been there for some time but goes undetected for the majority of USB-C PD power adapters on the market today that have 6 or less PDO_s. That may soon change as more USB-C PD adapters with PPS come to market.

Tested on a EP-TA485 and an older Lenovo PN: SA10M13950 USB-C 65 Watt adapter (without PPS and has 4 PDO_s) plus several other PD power adapters.

---
 drivers/usb/typec/tcpm/tcpci.c |   20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)
drivers/usb/typec/tcpm/tcpci.c +15 -5
@@ -432,20 +432,30 @@ irqreturn_t tcpci_irq(struct tcpci *tcpc
 
 	if (status & TCPC_ALERT_RX_STATUS) {
 		struct pd_message msg;
-		unsigned int cnt;
+		unsigned int cnt, payload_cnt;
 		u16 header;
 
 		regmap_read(tcpci->regmap, TCPC_RX_BYTE_CNT, &cnt);
+		/*
+		 * 'cnt' corresponds to READABLE_BYTE_COUNT in section 4.4.14
+		 * of the TCPCI spec [Rev 2.0 Ver 1.0 October 2017] and is
+		 * defined in table 4-36 as one greater than the number of
+		 * bytes received. And that number includes the header. So:
+		 */
+		if (cnt > 3)
+			payload_cnt = cnt - (1 + sizeof(msg.header));
+		else
+			payload_cnt = 0;
 
 		tcpci_read16(tcpci, TCPC_RX_HDR, &header);
 		msg.header = cpu_to_le16(header);
 
-		if (WARN_ON(cnt > sizeof(msg.payload)))
-			cnt = sizeof(msg.payload);
+		if (WARN_ON(payload_cnt > sizeof(msg.payload)))
+			payload_cnt = sizeof(msg.payload);
 
-		if (cnt > 0)
+		if (payload_cnt > 0)
 			regmap_raw_read(tcpci->regmap, TCPC_RX_DATA,
-					&msg.payload, cnt);
+					&msg.payload, payload_cnt);
 
 		/* Read complete, clear RX status alert bit */
 		tcpci_write16(tcpci, TCPC_ALERT, TCPC_ALERT_RX_STATUS);
author maintainer
#65 lore raw

PATCH 45/78 USB: serial: option: add ZLP support for 0x1bc7/0x9010

In reply to Greg Kroah-Hartman

From: Daniele Palmas <[email protected]>

commit 2438c3a19dec5e98905fd3ffcc2f24716aceda6b upstream.

Telit FN980 flashing device 0x1bc7/0x9010 requires zero packet to be sent if out data size is is equal to the endpoint max size.

[ johan: switch operands in conditional ]
Cc stable <[email protected]>
---
 drivers/usb/serial/option.c   |    8 ++++++++
 drivers/usb/serial/usb-wwan.h |    1 +
 drivers/usb/serial/usb_wwan.c |    4 ++++
 3 files changed, 13 insertions(+)
drivers/usb/serial/option.c +8 -0
@@ -567,6 +567,9 @@ static void option_instat_callback(struc
 /* Interface must have two endpoints */
 #define NUMEP2		BIT(16)
 
+/* Device needs ZLP */
+#define ZLP		BIT(17)
+
 
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -1198,6 +1201,8 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(0) | RSVD(1) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff),	/* Telit LN940 (MBIM) */
 	  .driver_info = NCTRL(0) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x9010),				/* Telit SBL FN980 flashing device */
+	  .driver_info = NCTRL(0) | ZLP },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) },
@@ -2099,6 +2104,9 @@ static int option_attach(struct usb_seri
 	if (!(device_flags & NCTRL(iface_desc->bInterfaceNumber)))
 		data->use_send_setup = 1;
 
+	if (device_flags & ZLP)
+		data->use_zlp = 1;
+
 	spin_lock_init(&data->susp_lock);
 
 	usb_set_serial_data(serial, data);
drivers/usb/serial/usb-wwan.h +1 -0
@@ -38,6 +38,7 @@ struct usb_wwan_intf_private {
 	spinlock_t susp_lock;
 	unsigned int suspended:1;
 	unsigned int use_send_setup:1;
+	unsigned int use_zlp:1;
 	int in_flight;
 	unsigned int open_ports;
 	void *private;
drivers/usb/serial/usb_wwan.c +4 -0
@@ -461,6 +461,7 @@ static struct urb *usb_wwan_setup_urb(st
 				      void (*callback) (struct urb *))
 {
 	struct usb_serial *serial = port->serial;
+	struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial);
 	struct urb *urb;
 
 	urb = usb_alloc_urb(0, GFP_KERNEL);	/* No ISO */
@@ -471,6 +472,9 @@ static struct urb *usb_wwan_setup_urb(st
 			  usb_sndbulkpipe(serial->dev, endpoint) | dir,
 			  buf, len, callback, ctx);
 
+	if (intfdata->use_zlp && dir == USB_DIR_OUT)
+		urb->transfer_flags |= URB_ZERO_PACKET;
+
 	return urb;
 }
 
author maintainer
#66 lore raw

PATCH 46/78 usb: musb: fix idling for suspend after disconnect interrupt

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

commit 5fbf7a2534703fd71159d3d71504b0ad01b43394 upstream.

When disconnected as USB B-device, suspend interrupt should come before diconnect interrupt, because the DP/DM pins are shorter than the VBUS/GND pins on the USB connectors. But we sometimes get a suspend interrupt after disconnect interrupt. In that case we have devctl set to 99 with VBUS still valid and musb_pm_runtime_check_session() wrongly thinks we have an active session. We have no other interrupts after disconnect coming in this case at least with the omap2430 glue.

Let's fix the issue by checking the interrupt status again with delayed work for the devctl 99 case. In the suspend after disconnect case the devctl session bit has cleared by then and musb can idle. For a typical USB B-device connect case we just continue with normal interrupts.

Fixes 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core")
---
 drivers/usb/musb/musb_core.c |    8 ++++++++
 1 file changed, 8 insertions(+)
drivers/usb/musb/musb_core.c +8 -0
@@ -1840,6 +1840,9 @@ ATTRIBUTE_GROUPS(musb);
 #define MUSB_QUIRK_B_INVALID_VBUS_91	(MUSB_DEVCTL_BDEVICE | \
 					 (2 << MUSB_DEVCTL_VBUS_SHIFT) | \
 					 MUSB_DEVCTL_SESSION)
+#define MUSB_QUIRK_B_DISCONNECT_99	(MUSB_DEVCTL_BDEVICE | \
+					 (3 << MUSB_DEVCTL_VBUS_SHIFT) | \
+					 MUSB_DEVCTL_SESSION)
 #define MUSB_QUIRK_A_DISCONNECT_19	((3 << MUSB_DEVCTL_VBUS_SHIFT) | \
 					 MUSB_DEVCTL_SESSION)
 
@@ -1862,6 +1865,11 @@ static void musb_pm_runtime_check_sessio
 	s = MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV |
 		MUSB_DEVCTL_HR;
 	switch (devctl & ~s) {
+	case MUSB_QUIRK_B_DISCONNECT_99:
+		musb_dbg(musb, "Poll devctl in case of suspend after disconnect\n");
+		schedule_delayed_work(&musb->irq_work,
+				      msecs_to_jiffies(1000));
+		break;
 	case MUSB_QUIRK_B_INVALID_VBUS_91:
 		if (musb->quirk_retries && !musb->flush_irq_work) {
 			musb_dbg(musb,
author maintainer
#67 lore raw

PATCH 47/78 usb: musb: Disable pullup at init

In reply to Greg Kroah-Hartman

From: Paul Cercueil <[email protected]>

commit 96a0c12843109e5c4d5eb1e09d915fdd0ce31d25 upstream.

The pullup may be already enabled before the driver is initialized. This happens for instance on JZ4740.

It has to be disabled at init time, as we cannot guarantee that a gadget driver will be bound to the UDC.

---
 drivers/usb/musb/musb_core.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/usb/musb/musb_core.c +3 -0
@@ -2318,6 +2318,9 @@ musb_init_controller(struct device *dev,
 	musb_disable_interrupts(musb);
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 
+	/* MUSB_POWER_SOFTCONN might be already set, JZ4740 does this. */
+	musb_writeb(musb->mregs, MUSB_POWER, 0);
+
 	/* Init IRQ workqueue before request_irq */
 	INIT_DELAYED_WORK(&musb->irq_work, musb_irq_work);
 	INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
author maintainer
#68 lore raw

PATCH 48/78 usb: musb: dma: Correct parameter passed to IRQ handler

In reply to Greg Kroah-Hartman

From: Paul Cercueil <[email protected]>

commit c80d0f4426c7fdc7efd6ae8d8b021dcfc89b4254 upstream.

The IRQ handler was passed a pointer to a struct dma_controller, but the argument was then casted to a pointer to a struct musb_dma_controller.

Fixes 427c4f333474 ("usb: struct device - replace bus_id with dev_name(), dev_set_name()")
---
 drivers/usb/musb/musbhsdma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/musb/musbhsdma.c +1 -1
@@ -425,7 +425,7 @@ struct dma_controller *musbhs_dma_contro
 	controller->controller.channel_abort = dma_channel_abort;
 
 	if (request_irq(irq, dma_controller_irq, 0,
-			dev_name(musb->controller), &controller->controller)) {
+			dev_name(musb->controller), controller)) {
 		dev_err(dev, "request_irq %d failed!\n", irq);
 		musb_dma_controller_destroy(&controller->controller);
 
author maintainer
#69 lore raw

PATCH 49/78 staging: comedi: adv_pci1710: fix AI channels 16-31 for PCI-1713

In reply to Greg Kroah-Hartman

From: Ian Abbott <[email protected]>

commit a9d3a9cedc1330c720e0ddde1978a8e7771da5ab upstream.

The Advantech PCI-1713 has 32 analog input channels, but an incorrect bit-mask in the definition of the PCI171X_MUX_CHANH(x) and PCI171X_MUX_CHANL(x)` macros is causing channels 16 to 31 to be aliases of channels 0 to 15. Change the bit-mask value from 0xf to 0xff to fix it. Note that the channel numbers will have been range checked already, so the bit-mask isn't really needed.

Fixes 92c65e5553ed ("staging: comedi: adv_pci1710: define the mux control register bits")
Cc <[email protected]> # v4.5+
---
 drivers/staging/comedi/drivers/adv_pci1710.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/comedi/drivers/adv_pci1710.c +2 -2
@@ -46,8 +46,8 @@
 #define PCI171X_RANGE_UNI	BIT(4)
 #define PCI171X_RANGE_GAIN(x)	(((x) & 0x7) << 0)
 #define PCI171X_MUX_REG		0x04	/* W:   A/D multiplexor control */
-#define PCI171X_MUX_CHANH(x)	(((x) & 0xf) << 8)
-#define PCI171X_MUX_CHANL(x)	(((x) & 0xf) << 0)
+#define PCI171X_MUX_CHANH(x)	(((x) & 0xff) << 8)
+#define PCI171X_MUX_CHANL(x)	(((x) & 0xff) << 0)
 #define PCI171X_MUX_CHAN(x)	(PCI171X_MUX_CHANH(x) | PCI171X_MUX_CHANL(x))
 #define PCI171X_STATUS_REG	0x06	/* R:   status register */
 #define PCI171X_STATUS_IRQ	BIT(11)	/* 1=IRQ occurred */
author maintainer
#70 lore raw

PATCH 50/78 staging: vt6656: correct return of vnt_init_registers.

In reply to Greg Kroah-Hartman

From: Malcolm Priestley <[email protected]>

commit 7de6155c8968a3342d1bef3f7a2084d31ae6e4be upstream.

The driver standard error returns remove bool false conditions.

---
 drivers/staging/vt6656/main_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/vt6656/main_usb.c +1 -1
@@ -950,7 +950,7 @@ static const struct ieee80211_ops vnt_ma
 
 int vnt_init(struct vnt_private *priv)
 {
-	if (!(vnt_init_registers(priv)))
+	if (vnt_init_registers(priv))
 		return -EAGAIN;
 
 	SET_IEEE80211_PERM_ADDR(priv->hw, priv->permanent_net_addr);
author maintainer
#71 lore raw

PATCH 51/78 staging: vt6656: limit reg output to block size

In reply to Greg Kroah-Hartman

From: Malcolm Priestley <[email protected]>

commit 69cc1f925e1aa74b96e2ace67e3453a50d091d2f upstream.

vnt_control_out appears to fail when BBREG is greater than 64 writes.

Create new function that will relay an array in no larger than the indicated block size.

It appears that this command has always failed but was ignored by driver until the introduction of error checking.

---
 drivers/staging/vt6656/baseband.c |    4 ++--
 drivers/staging/vt6656/usbpipe.c  |   17 +++++++++++++++++
 drivers/staging/vt6656/usbpipe.h  |    5 +++++
 3 files changed, 24 insertions(+), 2 deletions(-)
drivers/staging/vt6656/baseband.c +2 -2
@@ -449,8 +449,8 @@ int vnt_vt3184_init(struct vnt_private *
 
 	memcpy(array, addr, length);
 
-	ret = vnt_control_out(priv, MESSAGE_TYPE_WRITE, 0,
-			      MESSAGE_REQUEST_BBREG, length, array);
+	ret = vnt_control_out_blocks(priv, VNT_REG_BLOCK_SIZE,
+				     MESSAGE_REQUEST_BBREG, length, array);
 	if (ret)
 		goto end;
 
drivers/staging/vt6656/usbpipe.c +17 -0
@@ -76,6 +76,23 @@ int vnt_control_out_u8(struct vnt_privat
 			       reg_off, reg, sizeof(u8), &data);
 }
 
+int vnt_control_out_blocks(struct vnt_private *priv,
+			   u16 block, u8 reg, u16 length, u8 *data)
+{
+	int ret = 0, i;
+
+	for (i = 0; i < length; i += block) {
+		u16 len = min_t(int, length - i, block);
+
+		ret = vnt_control_out(priv, MESSAGE_TYPE_WRITE,
+				      i, reg, len, data + i);
+		if (ret)
+			goto end;
+	}
+end:
+	return ret;
+}
+
 int vnt_control_in(struct vnt_private *priv, u8 request, u16 value,
 		   u16 index, u16 length, u8 *buffer)
 {
drivers/staging/vt6656/usbpipe.h +5 -0
@@ -18,6 +18,8 @@
 
 #include "device.h"
 
+#define VNT_REG_BLOCK_SIZE	64
+
 int vnt_control_out(struct vnt_private *priv, u8 request, u16 value,
 		    u16 index, u16 length, u8 *buffer);
 int vnt_control_in(struct vnt_private *priv, u8 request, u16 value,
@@ -26,6 +28,9 @@ int vnt_control_in(struct vnt_private *p
 int vnt_control_out_u8(struct vnt_private *priv, u8 reg, u8 ref_off, u8 data);
 int vnt_control_in_u8(struct vnt_private *priv, u8 reg, u8 reg_off, u8 *data);
 
+int vnt_control_out_blocks(struct vnt_private *priv,
+			   u16 block, u8 reg, u16 len, u8 *data);
+
 int vnt_start_interrupt_urb(struct vnt_private *priv);
 int vnt_submit_rx_urb(struct vnt_private *priv, struct vnt_rcb *rcb);
 int vnt_tx_context(struct vnt_private *priv,
author maintainer
#72 lore raw

PATCH 52/78 staging: rtl8188eu: Add device code for TP-Link TL-WN727N v5.21

In reply to Greg Kroah-Hartman

From: Michael Straube <[email protected]>

commit 58dcc5bf4030cab548d5c98cd4cd3632a5444d5a upstream.

This device was added to the stand-alone driver on github. Add it to the staging driver as well.

---
 drivers/staging/rtl8188eu/os_dep/usb_intf.c |    1 +
 1 file changed, 1 insertion(+)
drivers/staging/rtl8188eu/os_dep/usb_intf.c +1 -0
@@ -37,6 +37,7 @@ static const struct usb_device_id rtw_us
 	{USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
 	{USB_DEVICE(0x2001, 0x331B)}, /* D-Link DWA-121 rev B1 */
 	{USB_DEVICE(0x2357, 0x010c)}, /* TP-Link TL-WN722N v2 */
+	{USB_DEVICE(0x2357, 0x0111)}, /* TP-Link TL-WN727N v5.21 */
 	{USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */
 	{USB_DEVICE(USB_VENDER_ID_REALTEK, 0xffef)}, /* Rosewill RNX-N150NUB */
 	{}	/* Terminating entry */
author maintainer
#73 lore raw

PATCH 53/78 serdev: Dont claim unsupported ACPI serial devices

In reply to Greg Kroah-Hartman

From: Punit Agrawal <[email protected]>

commit c5ee0b3104e0b292d353e63fd31cb8c692645d8c upstream.

Serdev sub-system claims all ACPI serial devices that are not already initialised. As a result, no device node is created for serial ports on certain boards such as the Apollo Lake based UP2. This has the unintended consequence of not being able to raise the login prompt via serial connection.

Introduce a blacklist to reject ACPI serial devices that should not be claimed by serdev sub-system. Add the peripheral ids for Intel HS UART to the blacklist to bring back serial port on SoCs carrying them.

---
 drivers/tty/serdev/core.c |   10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/tty/serdev/core.c +10 -0
@@ -582,6 +582,12 @@ static acpi_status acpi_serdev_register_
 	return AE_OK;
 }
 
+static const struct acpi_device_id serdev_acpi_devices_blacklist[] = {
+	{ "INT3511", 0 },
+	{ "INT3512", 0 },
+	{ },
+};
+
 static acpi_status acpi_serdev_add_device(acpi_handle handle, u32 level,
 				       void *data, void **return_value)
 {
@@ -591,6 +597,10 @@ static acpi_status acpi_serdev_add_devic
 	if (acpi_bus_get_device(handle, &adev))
 		return AE_OK;
 
+	/* Skip if black listed */
+	if (!acpi_match_device_ids(adev, serdev_acpi_devices_blacklist))
+		return AE_OK;
+
 	return acpi_serdev_register_device(ctrl, adev);
 }
 
author maintainer
#74 lore raw

PATCH 54/78 iommu/vt-d: Fix adding non-PCI devices to Intel IOMMU

In reply to Greg Kroah-Hartman

From: Patrick Steinhardt <[email protected]>

commit 4a350a0ee5b0a14f826fcdf60dd1a3199cafbfd6 upstream.

Starting with commit fa212a97f3a3 ("iommu/vt-d: Probe DMA-capable ACPI name space devices"), we now probe DMA-capable ACPI name space devices. On Dell XPS 13 9343, which has an Intel LPSS platform device INTL9C60 enumerated via ACPI, this change leads to the following warning:

    ------------[ cut here ]------------
    WARNING: CPU: 1 PID: 1 at pci_device_group+0x11a/0x130
    CPU: 1 PID: 1 Comm: swapper/0 Tainted: G                T 5.5.0-rc3+ #22
    Hardware name: Dell Inc. XPS 13 9343/0310JH, BIOS A20 06/06/2019
    RIP: 0010:pci_device_group+0x11a/0x130
    Code: f0 ff ff 48 85 c0 49 89 c4 75 c4 48 8d 74 24 10 48 89 ef e8 48 ef ff ff 48 85 c0 49 89 c4 75 af e8 db f7 ff ff 49 89 c4 eb a5 <0f> 0b 49 c7 c4 ea ff ff ff eb 9a e8 96 1e c7 ff 66 0f 1f 44 00 00
    RSP: 0000:ffffc0d6c0043cb0 EFLAGS: 00010202
    RAX: 0000000000000000 RBX: ffffa3d1d43dd810 RCX: 0000000000000000
    RDX: ffffa3d1d4fecf80 RSI: ffffa3d12943dcc0 RDI: ffffa3d1d43dd810
    RBP: ffffa3d1d43dd810 R08: 0000000000000000 R09: ffffa3d1d4c04a80
    R10: ffffa3d1d4c00880 R11: ffffa3d1d44ba000 R12: 0000000000000000
    R13: ffffa3d1d4383b80 R14: ffffa3d1d4c090d0 R15: ffffa3d1d4324530
    FS:  0000000000000000(0000) GS:ffffa3d1d6700000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000000 CR3: 000000000460a001 CR4: 00000000003606e0
    Call Trace:
     ? iommu_group_get_for_dev+0x81/0x1f0
     ? intel_iommu_add_device+0x61/0x170
     ? iommu_probe_device+0x43/0xd0
     ? intel_iommu_init+0x1fa2/0x2235
     ? pci_iommu_init+0x52/0xe7
     ? e820__memblock_setup+0x15c/0x15c
     ? do_one_initcall+0xcc/0x27e
     ? kernel_init_freeable+0x169/0x259
     ? rest_init+0x95/0x95
     ? kernel_init+0x5/0xeb
     ? ret_from_fork+0x35/0x40
    ---[ end trace 28473e7abc25b92c ]---
    DMAR: ACPI name space devices didn't probe correctly

The bug results from the fact that while we now enumerate ACPI devices, we aren't able to handle any non-PCI device when generating the device group. Fix the issue by implementing an Intel-specific callback that returns pci_device_group only if the device is a PCI device. Otherwise, it will return a generic device group.

Fixes fa212a97f3a3 ("iommu/vt-d: Probe DMA-capable ACPI name space devices")
---
 drivers/iommu/intel-iommu.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/iommu/intel-iommu.c +8 -1
@@ -5786,6 +5786,13 @@ static void intel_iommu_apply_resv_regio
 	WARN_ON_ONCE(!reserve_iova(&dmar_domain->iovad, start, end));
 }
 
+static struct iommu_group *intel_iommu_device_group(struct device *dev)
+{
+	if (dev_is_pci(dev))
+		return pci_device_group(dev);
+	return generic_device_group(dev);
+}
+
 #ifdef CONFIG_INTEL_IOMMU_SVM
 struct intel_iommu *intel_svm_device_to_iommu(struct device *dev)
 {
@@ -5958,7 +5965,7 @@ const struct iommu_ops intel_iommu_ops =
 	.get_resv_regions	= intel_iommu_get_resv_regions,
 	.put_resv_regions	= intel_iommu_put_resv_regions,
 	.apply_resv_region	= intel_iommu_apply_resv_region,
-	.device_group		= pci_device_group,
+	.device_group		= intel_iommu_device_group,
 	.dev_has_feat		= intel_iommu_dev_has_feat,
 	.dev_feat_enabled	= intel_iommu_dev_feat_enabled,
 	.dev_enable_feat	= intel_iommu_dev_enable_feat,
author maintainer
#75 lore raw

PATCH 55/78 tty: link tty and port before configuring it as console

In reply to Greg Kroah-Hartman

From: Sudip Mukherjee <[email protected]>

commit fb2b90014d782d80d7ebf663e50f96d8c507a73c upstream.

There seems to be a race condition in tty drivers and I could see on many boot cycles a NULL pointer dereference as tty_init_dev() tries to do 'tty->port->itty = tty' even though tty->port is NULL. 'tty->port' will be set by the driver and if the driver has not yet done it before we open the tty device we can get to this situation. By adding some extra debug prints, I noticed that:

6.650130: uart_add_one_port
6.663849: register_console
6.664846: tty_open
6.674391: tty_init_dev
6.675456: tty_port_link_device

uart_add_one_port() registers the console, as soon as it registers, the userspace tries to use it and that leads to tty_open() but uart_add_one_port() has not yet done tty_port_link_device() and so tty->port is not yet configured when control reaches tty_init_dev().

Further look into the code and tty_port_link_device() is done by uart_add_one_port(). After registering the console uart_add_one_port() will call tty_port_register_device_attr_serdev() and tty_port_link_device() is called from this.

Call add tty_port_link_device() before uart_configure_port() is done and add a check in tty_port_link_device() so that it only links the port if it has not been done yet.

---
 drivers/tty/serial/serial_core.c |    1 +
 drivers/tty/tty_port.c           |    3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)
drivers/tty/serial/serial_core.c +1 -0
@@ -2834,6 +2834,7 @@ int uart_add_one_port(struct uart_driver
 	if (uport->cons && uport->dev)
 		of_console_check(uport->dev->of_node, uport->cons->name, uport->line);
 
+	tty_port_link_device(port, drv->tty_driver, uport->line);
 	uart_configure_port(drv, state, uport);
 
 	port->console = uart_console(uport);
drivers/tty/tty_port.c +2 -1
@@ -89,7 +89,8 @@ void tty_port_link_device(struct tty_por
 {
 	if (WARN_ON(index >= driver->num))
 		return;
-	driver->ports[index] = port;
+	if (!driver->ports[index])
+		driver->ports[index] = port;
 }
 EXPORT_SYMBOL_GPL(tty_port_link_device);
 
author maintainer
#76 lore raw

PATCH 56/78 tty: always relink the port

In reply to Greg Kroah-Hartman

From: Sudip Mukherjee <[email protected]>

commit 273f632912f1b24b642ba5b7eb5022e43a72f3b5 upstream.

If the serial device is disconnected and reconnected, it re-enumerates properly but does not link it. fwiw, linking means just saving the port index, so allow it always as there is no harm in saving the same value again even if it tries to relink with the same port.

Fixes fb2b90014d78 ("tty: link tty and port before configuring it as console")
Cc stable <[email protected]>
---
 drivers/tty/tty_port.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/tty/tty_port.c +1 -2
@@ -89,8 +89,7 @@ void tty_port_link_device(struct tty_por
 {
 	if (WARN_ON(index >= driver->num))
 		return;
-	if (!driver->ports[index])
-		driver->ports[index] = port;
+	driver->ports[index] = port;
 }
 EXPORT_SYMBOL_GPL(tty_port_link_device);
 
author maintainer
#77 lore raw

PATCH 57/78 arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers

In reply to Greg Kroah-Hartman

From: Amanieu d'Antras <[email protected]>

commit 3e3c8ca5a351350031f0f3d5ecedf7048b1b9008 upstream.

Previously this was only defined in the internal headers which resulted in __NR_clone3 not being defined in the user headers.

---
 arch/arm64/include/asm/unistd.h      |    1 -
 arch/arm64/include/uapi/asm/unistd.h |    1 +
 2 files changed, 1 insertion(+), 1 deletion(-)
arch/arm64/include/asm/unistd.h +0 -1
@@ -42,7 +42,6 @@
 #endif
 
 #define __ARCH_WANT_SYS_CLONE
-#define __ARCH_WANT_SYS_CLONE3
 
 #ifndef __COMPAT_SYSCALL_NR
 #include <uapi/asm/unistd.h>
arch/arm64/include/uapi/asm/unistd.h +1 -0
@@ -19,5 +19,6 @@
 #define __ARCH_WANT_NEW_STAT
 #define __ARCH_WANT_SET_GET_RLIMIT
 #define __ARCH_WANT_TIME32_SYSCALLS
+#define __ARCH_WANT_SYS_CLONE3
 
 #include <asm-generic/unistd.h>
author maintainer
#78 lore raw

PATCH 58/78 arm64: Implement copy_thread_tls

In reply to Greg Kroah-Hartman

From: Amanieu d'Antras <[email protected]>

commit a4376f2fbcc8084832f2f114577c8d68234c7903 upstream.

This is required for clone3 which passes the TLS value through a struct rather than a register.

---
 arch/arm64/Kconfig          |    1 +
 arch/arm64/kernel/process.c |   10 +++++-----
 2 files changed, 6 insertions(+), 5 deletions(-)
arch/arm64/Kconfig +1 -0
@@ -139,6 +139,7 @@ config ARM64
 	select HAVE_CMPXCHG_DOUBLE
 	select HAVE_CMPXCHG_LOCAL
 	select HAVE_CONTEXT_TRACKING
+	select HAVE_COPY_THREAD_TLS
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
arch/arm64/kernel/process.c +5 -5
@@ -360,8 +360,8 @@ int arch_dup_task_struct(struct task_str
 
 asmlinkage void ret_from_fork(void) asm("ret_from_fork");
 
-int copy_thread(unsigned long clone_flags, unsigned long stack_start,
-		unsigned long stk_sz, struct task_struct *p)
+int copy_thread_tls(unsigned long clone_flags, unsigned long stack_start,
+		unsigned long stk_sz, struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *childregs = task_pt_regs(p);
 
@@ -394,11 +394,11 @@ int copy_thread(unsigned long clone_flag
 		}
 
 		/*
-		 * If a TLS pointer was passed to clone (4th argument), use it
-		 * for the new thread.
+		 * If a TLS pointer was passed to clone, use it for the new
+		 * thread.
 		 */
 		if (clone_flags & CLONE_SETTLS)
-			p->thread.uw.tp_value = childregs->regs[3];
+			p->thread.uw.tp_value = tls;
 	} else {
 		memset(childregs, 0, sizeof(struct pt_regs));
 		childregs->pstate = PSR_MODE_EL1h;
author maintainer
#79 lore raw

PATCH 59/78 arm: Implement copy_thread_tls

In reply to Greg Kroah-Hartman

From: Amanieu d'Antras <[email protected]>

commit 167ee0b82429cb5df272808c7a21370b7c961ab2 upstream.

This is required for clone3 which passes the TLS value through a struct rather than a register.

---
 arch/arm/Kconfig          |    1 +
 arch/arm/kernel/process.c |    6 +++---
 2 files changed, 4 insertions(+), 3 deletions(-)
arch/arm/Kconfig +1 -0
@@ -73,6 +73,7 @@ config ARM
 	select HAVE_ARM_SMCCC if CPU_V7
 	select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
 	select HAVE_CONTEXT_TRACKING
+	select HAVE_COPY_THREAD_TLS
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS if MMU
arch/arm/kernel/process.c +3 -3
@@ -224,8 +224,8 @@ void release_thread(struct task_struct *
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
 int
-copy_thread(unsigned long clone_flags, unsigned long stack_start,
-	    unsigned long stk_sz, struct task_struct *p)
+copy_thread_tls(unsigned long clone_flags, unsigned long stack_start,
+	    unsigned long stk_sz, struct task_struct *p, unsigned long tls)
 {
 	struct thread_info *thread = task_thread_info(p);
 	struct pt_regs *childregs = task_pt_regs(p);
@@ -259,7 +259,7 @@ copy_thread(unsigned long clone_flags, u
 	clear_ptrace_hw_breakpoint(p);
 
 	if (clone_flags & CLONE_SETTLS)
-		thread->tp_value[0] = childregs->ARM_r3;
+		thread->tp_value[0] = tls;
 	thread->tp_value[1] = get_tpuser();
 
 	thread_notify(THREAD_NOTIFY_COPY, thread);
author maintainer
#80 lore raw

PATCH 60/78 parisc: Implement copy_thread_tls

In reply to Greg Kroah-Hartman

From: Amanieu d'Antras <[email protected]>

commit d2f36c787b2181561d8b95814f8cdad64b348ad7 upstream.

This is required for clone3 which passes the TLS value through a struct rather than a register.

---
 arch/parisc/Kconfig          |    1 +
 arch/parisc/kernel/process.c |    8 ++++----
 2 files changed, 5 insertions(+), 4 deletions(-)
arch/parisc/Kconfig +1 -0
@@ -62,6 +62,7 @@ config PARISC
 	select HAVE_FTRACE_MCOUNT_RECORD if HAVE_DYNAMIC_FTRACE
 	select HAVE_KPROBES_ON_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS
+	select HAVE_COPY_THREAD_TLS
 
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
arch/parisc/kernel/process.c +4 -4
@@ -208,8 +208,8 @@ arch_initcall(parisc_idle_init);
  * Copy architecture-specific thread state
  */
 int
-copy_thread(unsigned long clone_flags, unsigned long usp,
-	    unsigned long kthread_arg, struct task_struct *p)
+copy_thread_tls(unsigned long clone_flags, unsigned long usp,
+	    unsigned long kthread_arg, struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *cregs = &(p->thread.regs);
 	void *stack = task_stack_page(p);
@@ -254,9 +254,9 @@ copy_thread(unsigned long clone_flags, u
 		cregs->ksp = (unsigned long)stack + THREAD_SZ_ALGN + FRAME_SIZE;
 		cregs->kpc = (unsigned long) &child_return;
 
-		/* Setup thread TLS area from the 4th parameter in clone */
+		/* Setup thread TLS area */
 		if (clone_flags & CLONE_SETTLS)
-			cregs->cr27 = cregs->gr[23];
+			cregs->cr27 = tls;
 	}
 
 	return 0;
author maintainer
#81 lore raw

PATCH 61/78 riscv: Implement copy_thread_tls

In reply to Greg Kroah-Hartman

From: Amanieu d'Antras <[email protected]>

commit 20bda4ed62f507ed72e30e817b43c65fdba60be7 upstream.

This is required for clone3 which passes the TLS value through a struct rather than a register.

---
 arch/riscv/Kconfig          |    1 +
 arch/riscv/kernel/process.c |    6 +++---
 2 files changed, 4 insertions(+), 3 deletions(-)
arch/riscv/Kconfig +1 -0
@@ -61,6 +61,7 @@ config RISCV
 	select SPARSEMEM_STATIC if 32BIT
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
 	select HAVE_ARCH_MMAP_RND_BITS
+	select HAVE_COPY_THREAD_TLS
 
 config ARCH_MMAP_RND_BITS_MIN
 	default 18 if 64BIT
arch/riscv/kernel/process.c +3 -3
@@ -99,8 +99,8 @@ int arch_dup_task_struct(struct task_str
 	return 0;
 }
 
-int copy_thread(unsigned long clone_flags, unsigned long usp,
-	unsigned long arg, struct task_struct *p)
+int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
+	unsigned long arg, struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *childregs = task_pt_regs(p);
 
@@ -120,7 +120,7 @@ int copy_thread(unsigned long clone_flag
 		if (usp) /* User fork */
 			childregs->sp = usp;
 		if (clone_flags & CLONE_SETTLS)
-			childregs->tp = childregs->a5;
+			childregs->tp = tls;
 		childregs->a0 = 0; /* Return value of fork() */
 		p->thread.ra = (unsigned long)ret_from_fork;
 	}
author maintainer
#82 lore raw

PATCH 62/78 xtensa: Implement copy_thread_tls

In reply to Greg Kroah-Hartman

From: Amanieu d'Antras <[email protected]>

commit c346b94f8c5d1b7d637522c908209de93305a8eb upstream.

This is required for clone3 which passes the TLS value through a struct rather than a register.

---
 arch/xtensa/Kconfig          |    1 +
 arch/xtensa/kernel/process.c |    8 ++++----
 2 files changed, 5 insertions(+), 4 deletions(-)
arch/xtensa/Kconfig +1 -0
@@ -22,6 +22,7 @@ config XTENSA
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_KASAN if MMU
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_COPY_THREAD_TLS
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_EXIT_THREAD
arch/xtensa/kernel/process.c +4 -4
@@ -202,8 +202,9 @@ int arch_dup_task_struct(struct task_str
  * involved.  Much simpler to just not copy those live frames across.
  */
 
-int copy_thread(unsigned long clone_flags, unsigned long usp_thread_fn,
-		unsigned long thread_fn_arg, struct task_struct *p)
+int copy_thread_tls(unsigned long clone_flags, unsigned long usp_thread_fn,
+		unsigned long thread_fn_arg, struct task_struct *p,
+		unsigned long tls)
 {
 	struct pt_regs *childregs = task_pt_regs(p);
 
@@ -264,9 +265,8 @@ int copy_thread(unsigned long clone_flag
 			       &regs->areg[XCHAL_NUM_AREGS - len/4], len);
 		}
 
-		/* The thread pointer is passed in the '4th argument' (= a5) */
 		if (clone_flags & CLONE_SETTLS)
-			childregs->threadptr = childregs->areg[5];
+			childregs->threadptr = tls;
 	} else {
 		p->thread.ra = MAKE_RA_FOR_CALL(
 				(unsigned long)ret_from_kernel_thread, 1);
author maintainer
#83 lore raw

PATCH 63/78 clone3: ensure copy_thread_tls is implemented

In reply to Greg Kroah-Hartman

From: Amanieu d'Antras <[email protected]>

commit dd499f7a7e34270208350a849ef103c0b3ae477f upstream.

copy_thread implementations handle CLONE_SETTLS by reading the TLS value from the registers containing the syscall arguments for clone. This doesn't work with clone3 since the TLS value is passed in clone_args instead.

---
 kernel/fork.c |   10 ++++++++++
 1 file changed, 10 insertions(+)
kernel/fork.c +10 -0
@@ -2513,6 +2513,16 @@ SYSCALL_DEFINE5(clone, unsigned long, cl
 #endif
 
 #ifdef __ARCH_WANT_SYS_CLONE3
+
+/*
+ * copy_thread implementations handle CLONE_SETTLS by reading the TLS value from
+ * the registers containing the syscall arguments for clone. This doesn't work
+ * with clone3 since the TLS value is passed in clone_args instead.
+ */
+#ifndef CONFIG_HAVE_COPY_THREAD_TLS
+#error clone3 requires copy_thread_tls support in arch
+#endif
+
 noinline static int copy_clone_args_from_user(struct kernel_clone_args *kargs,
 					      struct clone_args __user *uargs,
 					      size_t usize)
author maintainer
#84 lore raw

PATCH 64/78 um: Implement copy_thread_tls

In reply to Greg Kroah-Hartman

From: Amanieu d'Antras <[email protected]>

commit 457677c70c7672a4586b0b8abc396cc1ecdd376d upstream.

This is required for clone3 which passes the TLS value through a struct rather than a register.

---
 arch/um/Kconfig                      |    1 +
 arch/um/include/asm/ptrace-generic.h |    2 +-
 arch/um/kernel/process.c             |    6 +++---
 arch/x86/um/tls_32.c                 |    6 ++----
 arch/x86/um/tls_64.c                 |    7 +++----
 5 files changed, 10 insertions(+), 12 deletions(-)
arch/um/Kconfig +1 -0
@@ -14,6 +14,7 @@ config UML
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DEBUG_BUGVERBOSE
+	select HAVE_COPY_THREAD_TLS
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
 	select GENERIC_CLOCKEVENTS
arch/um/include/asm/ptrace-generic.h +1 -1
@@ -36,7 +36,7 @@ extern long subarch_ptrace(struct task_s
 extern unsigned long getreg(struct task_struct *child, int regno);
 extern int putreg(struct task_struct *child, int regno, unsigned long value);
 
-extern int arch_copy_tls(struct task_struct *new);
+extern int arch_set_tls(struct task_struct *new, unsigned long tls);
 extern void clear_flushed_tls(struct task_struct *task);
 extern int syscall_trace_enter(struct pt_regs *regs);
 extern void syscall_trace_leave(struct pt_regs *regs);
arch/um/kernel/process.c +3 -3
@@ -153,8 +153,8 @@ void fork_handler(void)
 	userspace(&current->thread.regs.regs, current_thread_info()->aux_fp_regs);
 }
 
-int copy_thread(unsigned long clone_flags, unsigned long sp,
-		unsigned long arg, struct task_struct * p)
+int copy_thread_tls(unsigned long clone_flags, unsigned long sp,
+		unsigned long arg, struct task_struct * p, unsigned long tls)
 {
 	void (*handler)(void);
 	int kthread = current->flags & PF_KTHREAD;
@@ -188,7 +188,7 @@ int copy_thread(unsigned long clone_flag
 		 * Set a new TLS for the child thread?
 		 */
 		if (clone_flags & CLONE_SETTLS)
-			ret = arch_copy_tls(p);
+			ret = arch_set_tls(p, tls);
 	}
 
 	return ret;
arch/x86/um/tls_32.c +2 -4
@@ -215,14 +215,12 @@ static int set_tls_entry(struct task_str
 	return 0;
 }
 
-int arch_copy_tls(struct task_struct *new)
+int arch_set_tls(struct task_struct *new, unsigned long tls)
 {
 	struct user_desc info;
 	int idx, ret = -EFAULT;
 
-	if (copy_from_user(&info,
-			   (void __user *) UPT_SI(&new->thread.regs.regs),
-			   sizeof(info)))
+	if (copy_from_user(&info, (void __user *) tls, sizeof(info)))
 		goto out;
 
 	ret = -EINVAL;
arch/x86/um/tls_64.c +3 -4
@@ -6,14 +6,13 @@ void clear_flushed_tls(struct task_struc
 {
 }
 
-int arch_copy_tls(struct task_struct *t)
+int arch_set_tls(struct task_struct *t, unsigned long tls)
 {
 	/*
 	 * If CLONE_SETTLS is set, we need to save the thread id
-	 * (which is argument 5, child_tid, of clone) so it can be set
-	 * during context switches.
+	 * so it can be set during context switches.
 	 */
-	t->thread.arch.fs = t->thread.regs.regs.gp[R8 / sizeof(long)];
+	t->thread.arch.fs = tls;
 
 	return 0;
 }

_______________________________________________
linux-um mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-um

author maintainer
#85 lore raw

PATCH 65/78 staging: vt6656: remove bool from vnt_radio_power_on ret

In reply to Greg Kroah-Hartman

From: Malcolm Priestley <[email protected]>

commit 07f59f180ee083c48c32a1e69ae1d0091444d212 upstream.

The driver uses logical only error checking a bool true would flag error.

---
 drivers/staging/vt6656/card.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/vt6656/card.c +1 -1
@@ -719,7 +719,7 @@ end:
  */
 int vnt_radio_power_on(struct vnt_private *priv)
 {
-	int ret = true;
+	int ret = 0;
 
 	vnt_exit_deep_sleep(priv);
 
author maintainer
#86 lore raw

PATCH 66/78 mwifiex: fix possible heap overflow in mwifiex_process_country_ie()

In reply to Greg Kroah-Hartman

From: Ganapathi Bhat <[email protected]>

commit 3d94a4a8373bf5f45cf5f939e88b8354dbf2311b upstream.

mwifiex_process_country_ie() function parse elements of bss descriptor in beacon packet. When processing WLAN_EID_COUNTRY element, there is no upper limit check for country_ie_len before calling memcpy. The destination buffer domain_info->triplet is an array of length MWIFIEX_MAX_TRIPLET_802_11D(83). The remote attacker can build a fake AP with the same ssid as real AP, and send malicous beacon packet with long WLAN_EID_COUNTRY elemen (country_ie_len > 83). Attacker can force STA connect to fake AP on a different channel. When the victim STA connects to fake AP, will trigger the heap buffer overflow. Fix this by checking for length and if found invalid, don not connect to the AP.

This fix addresses CVE-2019-14895.

---
 drivers/net/wireless/marvell/mwifiex/sta_ioctl.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/net/wireless/marvell/mwifiex/sta_ioctl.c +11 -2
@@ -229,6 +229,14 @@ static int mwifiex_process_country_ie(st
 			    "11D: skip setting domain info in FW\n");
 		return 0;
 	}
+
+	if (country_ie_len >
+	    (IEEE80211_COUNTRY_STRING_LEN + MWIFIEX_MAX_TRIPLET_802_11D)) {
+		mwifiex_dbg(priv->adapter, ERROR,
+			    "11D: country_ie_len overflow!, deauth AP\n");
+		return -EINVAL;
+	}
+
 	memcpy(priv->adapter->country_code, &country_ie[2], 2);
 
 	domain_info->country_code[0] = country_ie[2];
@@ -272,8 +280,9 @@ int mwifiex_bss_start(struct mwifiex_pri
 	priv->scan_block = false;
 
 	if (bss) {
-		if (adapter->region_code == 0x00)
-			mwifiex_process_country_ie(priv, bss);
+		if (adapter->region_code == 0x00 &&
+		    mwifiex_process_country_ie(priv, bss))
+			return -EINVAL;
 
 		/* Allocate and fill new bss descriptor */
 		bss_desc = kzalloc(sizeof(struct mwifiex_bssdescriptor),
author maintainer
#87 lore raw

PATCH 67/78 mwifiex: pcie: Fix memory leak in mwifiex_pcie_alloc_cmdrsp_buf

In reply to Greg Kroah-Hartman

From: Navid Emamdoost <[email protected]>

commit db8fd2cde93227e566a412cf53173ffa227998bc upstream.

In mwifiex_pcie_alloc_cmdrsp_buf, a new skb is allocated which should be released if mwifiex_map_pci_memory() fails. The release is added.

Fixes fc3314609047 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe")
Cc Ben Hutchings <[email protected]>
---
 drivers/net/wireless/marvell/mwifiex/pcie.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/wireless/marvell/mwifiex/pcie.c +3 -1
@@ -1032,8 +1032,10 @@ static int mwifiex_pcie_alloc_cmdrsp_buf
 	}
 	skb_put(skb, MWIFIEX_UPLD_SIZE);
 	if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE,
-				   PCI_DMA_FROMDEVICE))
+				   PCI_DMA_FROMDEVICE)) {
+		kfree_skb(skb);
 		return -1;
+	}
 
 	card->cmdrsp_buf = skb;
 
author maintainer
#88 lore raw

PATCH 68/78 rpmsg: char: release allocated memory

In reply to Greg Kroah-Hartman

From: Navid Emamdoost <[email protected]>

commit bbe692e349e2a1edf3fe0a29a0e05899c9c94d51 upstream.

In rpmsg_eptdev_write_iter, if copy_from_iter_full fails the allocated buffer needs to be released.

---
 drivers/rpmsg/rpmsg_char.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/rpmsg/rpmsg_char.c +4 -2
@@ -227,8 +227,10 @@ static ssize_t rpmsg_eptdev_write_iter(s
 	if (!kbuf)
 		return -ENOMEM;
 
-	if (!copy_from_iter_full(kbuf, len, from))
-		return -EFAULT;
+	if (!copy_from_iter_full(kbuf, len, from)) {
+		ret = -EFAULT;
+		goto free_kbuf;
+	}
 
 	if (mutex_lock_interruptible(&eptdev->ept_lock)) {
 		ret = -ERESTARTSYS;
author maintainer
#89 lore raw

PATCH 69/78 scsi: bfa: release allocated memory in case of error

In reply to Greg Kroah-Hartman

From: Navid Emamdoost <[email protected]>

commit 0e62395da2bd5166d7c9e14cbc7503b256a34cb0 upstream.

In bfad_im_get_stats if bfa_port_get_stats fails, allocated memory needs to be released.

---
 drivers/scsi/bfa/bfad_attr.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/bfa/bfad_attr.c +3 -1
@@ -275,8 +275,10 @@ bfad_im_get_stats(struct Scsi_Host *shos
 	rc = bfa_port_get_stats(BFA_FCPORT(&bfad->bfa),
 				fcstats, bfad_hcb_comp, &fcomp);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
-	if (rc != BFA_STATUS_OK)
+	if (rc != BFA_STATUS_OK) {
+		kfree(fcstats);
 		return NULL;
+	}
 
 	wait_for_completion(&fcomp.comp);
 
author maintainer
#90 lore raw

PATCH 70/78 rtl8xxxu: prevent leaking urb

In reply to Greg Kroah-Hartman

From: Navid Emamdoost <[email protected]>

commit a2cdd07488e666aa93a49a3fc9c9b1299e27ef3c upstream.

In rtl8xxxu_submit_int_urb if usb_submit_urb fails the allocated urb should be released.

---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +1 -0
@@ -5447,6 +5447,7 @@ static int rtl8xxxu_submit_int_urb(struc
 	ret = usb_submit_urb(urb, GFP_KERNEL);
 	if (ret) {
 		usb_unanchor_urb(urb);
+		usb_free_urb(urb);
 		goto error;
 	}
 
author maintainer
#91 lore raw

PATCH 71/78 ath10k: fix memory leak

In reply to Greg Kroah-Hartman

From: Navid Emamdoost <[email protected]>

commit b8d17e7d93d2beb89e4f34c59996376b8b544792 upstream.

In ath10k_usb_hif_tx_sg the allocated urb should be released if usb_submit_urb fails.

---
 drivers/net/wireless/ath/ath10k/usb.c |    1 +
 1 file changed, 1 insertion(+)
drivers/net/wireless/ath/ath10k/usb.c +1 -0
@@ -443,6 +443,7 @@ static int ath10k_usb_hif_tx_sg(struct a
 			ath10k_dbg(ar, ATH10K_DBG_USB_BULK,
 				   "usb bulk transmit failed: %d\n", ret);
 			usb_unanchor_urb(urb);
+			usb_free_urb(urb);
 			ret = -EINVAL;
 			goto err_free_urb_to_pipe;
 		}
author maintainer
#92 lore raw

PATCH 72/78 HID: hiddev: fix mess in hiddev_open()

In reply to Greg Kroah-Hartman

From: Dmitry Torokhov <[email protected]>

commit 18a1b06e5b91d47dc86c0a66a762646ea7c5d141 upstream.

The open method of hiddev handler fails to bring the device out of autosuspend state as was promised in 0361a28d3f9a, as it actually has 2 blocks that try to start the transport (call hid_hw_open()) with both being guarded by the "open" counter, so the 2nd block is never executed as the first block increments the counter so it is never at 0 when we check it for the second block.

Additionally hiddev_open() was leaving counter incremented on errors, causing the device to never be reopened properly if there was ever an error.

Let's fix all of this by factoring out code that creates client structure and powers up the device into a separate function that is being called from usbhid_open() with the "existancelock" being held.

Fixes 0361a28d3f9a ("HID: autosuspend support for USB HID")
---
 drivers/hid/usbhid/hiddev.c |   97 +++++++++++++++++++-------------------------
 1 file changed, 42 insertions(+), 55 deletions(-)
drivers/hid/usbhid/hiddev.c +42 -55
@@ -241,12 +241,51 @@ static int hiddev_release(struct inode *
 	return 0;
 }
 
+static int __hiddev_open(struct hiddev *hiddev, struct file *file)
+{
+	struct hiddev_list *list;
+	int error;
+
+	lockdep_assert_held(&hiddev->existancelock);
+
+	list = vzalloc(sizeof(*list));
+	if (!list)
+		return -ENOMEM;
+
+	mutex_init(&list->thread_lock);
+	list->hiddev = hiddev;
+
+	if (!hiddev->open++) {
+		error = hid_hw_power(hiddev->hid, PM_HINT_FULLON);
+		if (error < 0)
+			goto err_drop_count;
+
+		error = hid_hw_open(hiddev->hid);
+		if (error < 0)
+			goto err_normal_power;
+	}
+
+	spin_lock_irq(&hiddev->list_lock);
+	list_add_tail(&list->node, &hiddev->list);
+	spin_unlock_irq(&hiddev->list_lock);
+
+	file->private_data = list;
+
+	return 0;
+
+err_normal_power:
+	hid_hw_power(hiddev->hid, PM_HINT_NORMAL);
+err_drop_count:
+	hiddev->open--;
+	vfree(list);
+	return error;
+}
+
 /*
  * open file op
  */
 static int hiddev_open(struct inode *inode, struct file *file)
 {
-	struct hiddev_list *list;
 	struct usb_interface *intf;
 	struct hid_device *hid;
 	struct hiddev *hiddev;
@@ -255,66 +294,14 @@ static int hiddev_open(struct inode *ino
 	intf = usbhid_find_interface(iminor(inode));
 	if (!intf)
 		return -ENODEV;
+
 	hid = usb_get_intfdata(intf);
 	hiddev = hid->hiddev;
 
-	if (!(list = vzalloc(sizeof(struct hiddev_list))))
-		return -ENOMEM;
-	mutex_init(&list->thread_lock);
-	list->hiddev = hiddev;
-	file->private_data = list;
-
-	/*
-	 * no need for locking because the USB major number
-	 * is shared which usbcore guards against disconnect
-	 */
-	if (list->hiddev->exist) {
-		if (!list->hiddev->open++) {
-			res = hid_hw_open(hiddev->hid);
-			if (res < 0)
-				goto bail;
-		}
-	} else {
-		res = -ENODEV;
-		goto bail;
-	}
-
-	spin_lock_irq(&list->hiddev->list_lock);
-	list_add_tail(&list->node, &hiddev->list);
-	spin_unlock_irq(&list->hiddev->list_lock);
-
 	mutex_lock(&hiddev->existancelock);
-	/*
-	 * recheck exist with existance lock held to
-	 * avoid opening a disconnected device
-	 */
-	if (!list->hiddev->exist) {
-		res = -ENODEV;
-		goto bail_unlock;
-	}
-	if (!list->hiddev->open++)
-		if (list->hiddev->exist) {
-			struct hid_device *hid = hiddev->hid;
-			res = hid_hw_power(hid, PM_HINT_FULLON);
-			if (res < 0)
-				goto bail_unlock;
-			res = hid_hw_open(hid);
-			if (res < 0)
-				goto bail_normal_power;
-		}
-	mutex_unlock(&hiddev->existancelock);
-	return 0;
-bail_normal_power:
-	hid_hw_power(hid, PM_HINT_NORMAL);
-bail_unlock:
+	res = hiddev->exist ? __hiddev_open(hiddev, file) : -ENODEV;
 	mutex_unlock(&hiddev->existancelock);
 
-	spin_lock_irq(&list->hiddev->list_lock);
-	list_del(&list->node);
-	spin_unlock_irq(&list->hiddev->list_lock);
-bail:
-	file->private_data = NULL;
-	vfree(list);
 	return res;
 }
 
author maintainer
#93 lore raw

PATCH 73/78 USB: Fix: Dont skip endpoint descriptors with maxpacket=0

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit 2548288b4fb059b2da9ceada172ef763077e8a59 upstream.

It turns out that even though endpoints with a maxpacket length of 0 aren't useful for data transfer, the descriptors do serve other purposes. In particular, skipping them will also skip over other class-specific descriptors for classes such as UVC. This unexpected side effect has caused some UVC cameras to stop working.

In addition, the USB spec requires that when isochronous endpoint descriptors are present in an interface's altsetting 0 (which is true on some devices), the maxpacket size _must_ be set to 0. Warning about such things seems like a bad idea.

This patch updates an earlier commit which would log a warning and skip these endpoint descriptors. Now we only log a warning, and we don't even do that for isochronous endpoints in altsetting 0.

We don't need to worry about preventing endpoints with maxpacket = 0 from ever being used for data transfers; usb_submit_urb() already checks for this.

---
 drivers/usb/core/config.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/usb/core/config.c +8 -4
@@ -392,12 +392,16 @@ static int usb_parse_endpoint(struct dev
 			endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
 	}
 
-	/* Validate the wMaxPacketSize field */
+	/*
+	 * Validate the wMaxPacketSize field.
+	 * Some devices have isochronous endpoints in altsetting 0;
+	 * the USB-2 spec requires such endpoints to have wMaxPacketSize = 0
+	 * (see the end of section 5.6.3), so don't warn about them.
+	 */
 	maxp = usb_endpoint_maxp(&endpoint->desc);
-	if (maxp == 0) {
-		dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has wMaxPacketSize 0, skipping\n",
+	if (maxp == 0 && !(usb_endpoint_xfer_isoc(d) && asnum == 0)) {
+		dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n",
 		    cfgno, inum, asnum, d->bEndpointAddress);
-		goto skip_to_next_endpoint_or_interface_descriptor;
 	}
 
 	/* Find the highest legal maxpacket size for this endpoint */
author maintainer
#94 lore raw

PATCH 74/78 phy: cpcap-usb: Fix error path when no host driver is loaded

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

commit 4acb0200ab2b07843e3ef5599add3454c7440f03 upstream.

If musb_mailbox() returns an error, we must still continue to finish configuring the phy.

Otherwise the phy state may end up only half initialized, and this can cause the debug serial console to stop working. And this will happen if the usb driver musb controller is not loaded.

Let's fix the issue by adding helper for cpcap_usb_try_musb_mailbox().

Fixes 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support")
Cc Merlijn Wajer <[email protected]>
Cc Pavel Machek <[email protected]>
Cc Sebastian Reichel <[email protected]>
---
 drivers/phy/motorola/phy-cpcap-usb.c |   33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)
drivers/phy/motorola/phy-cpcap-usb.c +18 -15
@@ -207,6 +207,19 @@ static int cpcap_phy_get_ints_state(stru
 static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata);
 static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata);
 
+static void cpcap_usb_try_musb_mailbox(struct cpcap_phy_ddata *ddata,
+				       enum musb_vbus_id_status status)
+{
+	int error;
+
+	error = musb_mailbox(status);
+	if (!error)
+		return;
+
+	dev_dbg(ddata->dev, "%s: musb_mailbox failed: %i\n",
+		__func__, error);
+}
+
 static void cpcap_usb_detect(struct work_struct *work)
 {
 	struct cpcap_phy_ddata *ddata;
@@ -226,9 +239,7 @@ static void cpcap_usb_detect(struct work
 		if (error)
 			goto out_err;
 
-		error = musb_mailbox(MUSB_ID_GROUND);
-		if (error)
-			goto out_err;
+		cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND);
 
 		error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
 					   CPCAP_BIT_VBUSSTBY_EN |
@@ -257,9 +268,7 @@ static void cpcap_usb_detect(struct work
 			error = cpcap_usb_set_usb_mode(ddata);
 			if (error)
 				goto out_err;
-			error = musb_mailbox(MUSB_ID_GROUND);
-			if (error)
-				goto out_err;
+			cpcap_usb_try_musb_mailbox(ddata, MUSB_ID_GROUND);
 
 			return;
 		}
@@ -269,9 +278,7 @@ static void cpcap_usb_detect(struct work
 		error = cpcap_usb_set_usb_mode(ddata);
 		if (error)
 			goto out_err;
-		error = musb_mailbox(MUSB_VBUS_VALID);
-		if (error)
-			goto out_err;
+		cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_VALID);
 
 		return;
 	}
@@ -281,9 +288,7 @@ static void cpcap_usb_detect(struct work
 	if (error)
 		goto out_err;
 
-	error = musb_mailbox(MUSB_VBUS_OFF);
-	if (error)
-		goto out_err;
+	cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF);
 
 	dev_dbg(ddata->dev, "set UART mode\n");
 
@@ -649,9 +654,7 @@ static int cpcap_usb_phy_remove(struct p
 	if (error)
 		dev_err(ddata->dev, "could not set UART mode\n");
 
-	error = musb_mailbox(MUSB_VBUS_OFF);
-	if (error)
-		dev_err(ddata->dev, "could not set mailbox\n");
+	cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF);
 
 	usb_remove_phy(&ddata->phy);
 	cancel_delayed_work_sync(&ddata->detect_work);
author maintainer
#95 lore raw

PATCH 75/78 phy: cpcap-usb: Fix flakey host idling and enumerating of devices

In reply to Greg Kroah-Hartman

From: Tony Lindgren <[email protected]>

commit 049226b9fd7442149dcbcf55f15408f5973cceda upstream.

We must let the USB host idle things properly before we switch to debug UART mode. Otherwise the USB host may never idle after disconnecting devices, and that causes the next enumeration to be flakey.

Cc Jacopo Mondi <[email protected]>
Cc Marcel Partap <[email protected]>
Cc Merlijn Wajer <[email protected]>
Cc Michael Scott <[email protected]>
Cc Pavel Machek <[email protected]>
Cc Sebastian Reichel <[email protected]>
Fixes 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support")
---
 drivers/phy/motorola/phy-cpcap-usb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/phy/motorola/phy-cpcap-usb.c +2 -2
@@ -283,13 +283,13 @@ static void cpcap_usb_detect(struct work
 		return;
 	}
 
+	cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF);
+
 	/* Default to debug UART mode */
 	error = cpcap_usb_set_uart_mode(ddata);
 	if (error)
 		goto out_err;
 
-	cpcap_usb_try_musb_mailbox(ddata, MUSB_VBUS_OFF);
-
 	dev_dbg(ddata->dev, "set UART mode\n");
 
 	return;
author maintainer
#96 lore raw

PATCH 76/78 netfilter: arp_tables: init netns pointer in xt_tgchk_param struct

In reply to Greg Kroah-Hartman

From: Florian Westphal <[email protected]>

commit 1b789577f655060d98d20ed0c6f9fbd469d6ba63 upstream.

We get crash when the targets checkentry function tries to make use of the network namespace pointer for arptables.

When the net pointer got added back in 2010, only ip/ip6/ebtables were changed to initialize it, so arptables has this set to NULL.

This isn't a problem for normal arptables because no existing arptables target has a checkentry function that makes use of par->net.

However, direct users of the setsockopt interface can provide any target they want as long as its registered for ARP or UNPSEC protocols.

syzkaller managed to send a semi-valid arptables rule for RATEEST target which is enough to trigger NULL deref:

kasan: GPF could be caused by NULL-ptr deref or user memory access

general protection fault: 0000 [#1] PREEMPT SMP KASAN
RIP: xt_rateest_tg_checkentry+0x11d/0xb40 net/netfilter/xt_RATEEST.c:109
[..]
 xt_check_target+0x283/0x690 net/netfilter/x_tables.c:1019
 check_target net/ipv4/netfilter/arp_tables.c:399 [inline]
 find_check_entry net/ipv4/netfilter/arp_tables.c:422 [inline]
 translate_table+0x1005/0x1d70 net/ipv4/netfilter/arp_tables.c:572
 do_replace net/ipv4/netfilter/arp_tables.c:977 [inline]
 do_arpt_set_ctl+0x310/0x640 net/ipv4/netfilter/arp_tables.c:1456
Fixes add67461240c1d ("netfilter: add struct net * to target parameters")
Reported-by [email protected]
---
 net/ipv4/netfilter/arp_tables.c |   27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)
net/ipv4/netfilter/arp_tables.c +16 -11
@@ -384,10 +384,11 @@ next:		;
 	return 1;
 }
 
-static inline int check_target(struct arpt_entry *e, const char *name)
+static int check_target(struct arpt_entry *e, struct net *net, const char *name)
 {
 	struct xt_entry_target *t = arpt_get_target(e);
 	struct xt_tgchk_param par = {
+		.net       = net,
 		.table     = name,
 		.entryinfo = e,
 		.target    = t->u.kernel.target,
@@ -399,8 +400,9 @@ static inline int check_target(struct ar
 	return xt_check_target(&par, t->u.target_size - sizeof(*t), 0, false);
 }
 
-static inline int
-find_check_entry(struct arpt_entry *e, const char *name, unsigned int size,
+static int
+find_check_entry(struct arpt_entry *e, struct net *net, const char *name,
+		 unsigned int size,
 		 struct xt_percpu_counter_alloc_state *alloc_state)
 {
 	struct xt_entry_target *t;
@@ -419,7 +421,7 @@ find_check_entry(struct arpt_entry *e, c
 	}
 	t->u.kernel.target = target;
 
-	ret = check_target(e, name);
+	ret = check_target(e, net, name);
 	if (ret)
 		goto err;
 	return 0;
@@ -512,7 +514,9 @@ static inline void cleanup_entry(struct
 /* Checks and translates the user-supplied table segment (held in
  * newinfo).
  */
-static int translate_table(struct xt_table_info *newinfo, void *entry0,
+static int translate_table(struct net *net,
+			   struct xt_table_info *newinfo,
+			   void *entry0,
 			   const struct arpt_replace *repl)
 {
 	struct xt_percpu_counter_alloc_state alloc_state = { 0 };
@@ -569,7 +573,7 @@ static int translate_table(struct xt_tab
 	/* Finally, each sanity check must pass */
 	i = 0;
 	xt_entry_foreach(iter, entry0, newinfo->size) {
-		ret = find_check_entry(iter, repl->name, repl->size,
+		ret = find_check_entry(iter, net, repl->name, repl->size,
 				       &alloc_state);
 		if (ret != 0)
 			break;
@@ -974,7 +978,7 @@ static int do_replace(struct net *net, c
 		goto free_newinfo;
 	}
 
-	ret = translate_table(newinfo, loc_cpu_entry, &tmp);
+	ret = translate_table(net, newinfo, loc_cpu_entry, &tmp);
 	if (ret != 0)
 		goto free_newinfo;
 
@@ -1149,7 +1153,8 @@ compat_copy_entry_from_user(struct compa
 	}
 }
 
-static int translate_compat_table(struct xt_table_info **pinfo,
+static int translate_compat_table(struct net *net,
+				  struct xt_table_info **pinfo,
 				  void **pentry0,
 				  const struct compat_arpt_replace *compatr)
 {
@@ -1217,7 +1222,7 @@ static int translate_compat_table(struct
 	repl.num_counters = 0;
 	repl.counters = NULL;
 	repl.size = newinfo->size;
-	ret = translate_table(newinfo, entry1, &repl);
+	ret = translate_table(net, newinfo, entry1, &repl);
 	if (ret)
 		goto free_newinfo;
 
@@ -1270,7 +1275,7 @@ static int compat_do_replace(struct net
 		goto free_newinfo;
 	}
 
-	ret = translate_compat_table(&newinfo, &loc_cpu_entry, &tmp);
+	ret = translate_compat_table(net, &newinfo, &loc_cpu_entry, &tmp);
 	if (ret != 0)
 		goto free_newinfo;
 
@@ -1546,7 +1551,7 @@ int arpt_register_table(struct net *net,
 	loc_cpu_entry = newinfo->entries;
 	memcpy(loc_cpu_entry, repl->entries, repl->size);
 
-	ret = translate_table(newinfo, loc_cpu_entry, repl);
+	ret = translate_table(net, newinfo, loc_cpu_entry, repl);
 	if (ret != 0)
 		goto out_free;
 
author maintainer
#97 lore raw

PATCH 77/78 netfilter: conntrack: dccp, sctp: handle null timeout argument

In reply to Greg Kroah-Hartman

From: Florian Westphal <[email protected]>

commit 1d9a7acd3d1e74c2d150d8934f7f55bed6d70858 upstream.

The timeout pointer can be NULL which means we should modify the per-nets timeout instead.

All do this, except sctp and dccp which instead give:

general protection fault: 0000 [#1] PREEMPT SMP KASAN
net/netfilter/nf_conntrack_proto_dccp.c:682
 ctnl_timeout_parse_policy+0x150/0x1d0 net/netfilter/nfnetlink_cttimeout.c:67
 cttimeout_default_set+0x150/0x1c0 net/netfilter/nfnetlink_cttimeout.c:368
 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
Reported-by [email protected]
Fixes c779e849608a8 ("netfilter: conntrack: remove get_timeout() indirection")
---
 net/netfilter/nf_conntrack_proto_dccp.c |    3 +++
 net/netfilter/nf_conntrack_proto_sctp.c |    3 +++
 2 files changed, 6 insertions(+)
net/netfilter/nf_conntrack_proto_dccp.c +3 -0
@@ -677,6 +677,9 @@ static int dccp_timeout_nlattr_to_obj(st
 	unsigned int *timeouts = data;
 	int i;
 
+	if (!timeouts)
+		 timeouts = dn->dccp_timeout;
+
 	/* set default DCCP timeouts. */
 	for (i=0; i<CT_DCCP_MAX; i++)
 		timeouts[i] = dn->dccp_timeout[i];
net/netfilter/nf_conntrack_proto_sctp.c +3 -0
@@ -594,6 +594,9 @@ static int sctp_timeout_nlattr_to_obj(st
 	struct nf_sctp_net *sn = nf_sctp_pernet(net);
 	int i;
 
+	if (!timeouts)
+		timeouts = sn->timeouts;
+
 	/* set default SCTP timeouts. */
 	for (i=0; i<SCTP_CONNTRACK_MAX; i++)
 		timeouts[i] = sn->timeouts[i];
author maintainer
#98 lore raw

PATCH 78/78 netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present

In reply to Greg Kroah-Hartman

From: Florian Westphal <[email protected]>

commit 22dad713b8a5ff488e07b821195270672f486eb2 upstream.

The set uadt functions assume lineno is never NULL, but it is in case of ip_set_utest().

syzkaller managed to generate a netlink message that calls this with LINENO attr present:

general protection fault: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:hash_mac4_uadt+0x1bc/0x470 net/netfilter/ipset/ip_set_hash_mac.c:104
Call Trace:
 ip_set_utest+0x55b/0x890 net/netfilter/ipset/ip_set_core.c:1867
 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 nfnetlink_rcv+0x1ba/0x460 net/netfilter/nfnetlink.c:563

pass a dummy lineno storage, its easier than patching all set implementations.

This seems to be a day-0 bug.

Cc Jozsef Kadlecsik <[email protected]>
Reported-by [email protected]
Fixes a7b4f989a6294 ("netfilter: ipset: IP set core support")
---
 net/netfilter/ipset/ip_set_core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/netfilter/ipset/ip_set_core.c +2 -1
@@ -1658,6 +1658,7 @@ static int ip_set_utest(struct net *net,
 	struct ip_set *set;
 	struct nlattr *tb[IPSET_ATTR_ADT_MAX + 1] = {};
 	int ret = 0;
+	u32 lineno;
 
 	if (unlikely(protocol_min_failed(attr) ||
 		     !attr[IPSET_ATTR_SETNAME] ||
@@ -1674,7 +1675,7 @@ static int ip_set_utest(struct net *net,
 		return -IPSET_ERR_PROTOCOL;
 
 	rcu_read_lock_bh();
-	ret = set->variant->uadt(set, tb, IPSET_TEST, NULL, 0, 0);
+	ret = set->variant->uadt(set, tb, IPSET_TEST, &lineno, 0, 0);
 	rcu_read_unlock_bh();
 	/* Userspace can't trigger element to be re-added */
 	if (ret == -EAGAIN)
maintainer
#99 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.12 release. There are 78 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 16 Jan 2020 09:41:58 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.12-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

All tests are passing for Tegra ...

Test results for stable-v5.4:

    13 builds:	13 pass, 0 fail
    22 boots:	22 pass, 0 fail
    38 tests:	38 pass, 0 fail

Linux version: 5.4.12-rc1-g5c903e10834d
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

Signature · 1 line
nvpublic
author maintainer
#100 lore raw
Quoted 18 lines · Jon Hunter
Quoted 16 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.12 release. There are 78 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 16 Jan 2020 09:41:58 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.12-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

Quoted 8 lines
Quoted 1 line

greg k-h

All tests are passing for Tegra ...

Test results for stable-v5.4:

    13 builds:	13 pass, 0 fail
    22 boots:	22 pass, 0 fail
    38 tests:	38 pass, 0 fail

Wonderful, thanks for the testing and quick response.

greg k-h

#101 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.12 release. There are 78 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 16 Jan 2020 09:41:58 +0000. Anything received after that time might be too late.

Build results:

	total: 158 pass: 158 fail: 0
Qemu test results:
	total: 389 pass: 389 fail: 0

Guenter

author maintainer
#102 lore raw
Quoted 6 lines · Guenter Roeck
Quoted 5 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.12 release. There are 78 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Quoted 8 lines
Quoted 3 lines

Responses should be made by Thu, 16 Jan 2020 09:41:58 +0000. Anything received after that time might be too late.

Build results:

	total: 158 pass: 158 fail: 0
Qemu test results:
	total: 389 pass: 389 fail: 0

Wonderful, thanks for testing all of these and letting me know.

greg k-h

#103 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.12 release. There are 78 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 16 Jan 2020 09:41:58 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.12-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

author maintainer
#104 lore raw
Quoted 15 lines · shuah
Quoted 14 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.12 release. There are 78 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 16 Jan 2020 09:41:58 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.12-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

Quoted 6 lines
Quoted 4 lines

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

Thanks for testing all of these and letting me know.

greg k-h

#105 lore raw
In reply to Greg Kroah-Hartman

Hello!

Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.12 release. There are 78 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 16 Jan 2020 09:41:58 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.12-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.4.12-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: 5c903e10834dc8905bf461f15b48cceb1ee8c0d9
git describe: v5.4.11-79-g5c903e10834d
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.11-79-g5c903e10834d

No regressions (compared to build v5.4.11)

No fixes (compared to build v5.4.11)

Ran 23755 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fs-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* spectre-meltdown-checker-test
* ssuite
* v4l2-compliance

Greetings!

Daniel Díaz
[email protected]

Signature · 2 lines
Linaro LKFT
https://lkft.linaro.org
author maintainer
#106 lore raw
Quoted 17 lines · Daniel Díaz

Hello!

Quoted 14 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.4.12 release. There are 78 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 16 Jan 2020 09:41:58 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.12-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

Quoted 6 lines
Quoted 3 lines

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Thanks for testing all of these and letting me know.

greg k-h