dt-bindings: devantech-srf04.yaml: add pm feature
Subsystems (2)
PATCH v2 1/2 dt-bindings: devantech-srf04.yaml: add pm feature
Add GPIO line and startup time for usage of power management
Signed-off-by Andreas Klinger <[email protected]>
--- .../iio/proximity/devantech-srf04.yaml | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml +18 -0
@@ -51,6 +51,24 @@ properties: the time between two interrupts is measured in the driver. maxItems: 1 + power-gpios: + description: + Definition of the GPIO for power management of connected peripheral + (output). + This GPIO can be used by the external hardware for power management. + When the device gets suspended it's switched off and when it resumes + it's switched on again. After some period of inactivity the driver + get suspended automatically (autosuspend feature). + maxItems: 1 + + startup-time-ms: + description: + This is the startup time the device needs after a resume to be up and + running. + minimum: 0 + maximum: 1000 + default: 100 + required: - compatible - trig-gpios
Signature · 1 line
2.20.1
Quoted 7 lines · Andreas Klinger
Add GPIO line and startup time for usage of power management
Signed-off-by Andreas Klinger <[email protected]>--- .../iio/proximity/devantech-srf04.yaml | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
Reviewed-by Rob Herring <[email protected]>