HID: logitech-dj: add support for the Powerplay mat/receiver
Subsystems (2)
PATCH v3 1/1 HID: logitech-dj: add support for the Powerplay mat/receiver
The Logitech G Powerplay has a lightspeed receiver with a static HID++ device with ID 7 attached to it to. It is used to configure the led on the mat. For this reason I increased the max number of devices.
Signed-off-by Filipe Laíns <[email protected]>
--- drivers/hid/hid-logitech-dj.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/hid/hid-logitech-dj.c +11 -2
@@ -16,11 +16,11 @@#include <asm/unaligned.h> #include "hid-ids.h" -#define DJ_MAX_PAIRED_DEVICES 6 +#define DJ_MAX_PAIRED_DEVICES 7#define DJ_MAX_NUMBER_NOTIFS 8#define DJ_RECEIVER_INDEX 0#define DJ_DEVICE_INDEX_MIN 1 -#define DJ_DEVICE_INDEX_MAX 6 +#define DJ_DEVICE_INDEX_MAX 7#define DJREPORT_SHORT_LENGTH 15#define DJREPORT_LONG_LENGTH 32
@@ -980,6 +980,11 @@ static void logi_hidpp_recv_queue_notif(struct hid_device *hdev,break ; } +/* custom receiver device (eg. powerplay) */ +if (hidpp_report->device_index ==7 ) { + workitem.reports_supported |=HIDPP ; + } +if (workitem.type ==WORKITEM_TYPE_EMPTY ) { hid_warn(hdev, "unusable device of type %s (0x%02x) connected on slot %d",
@@ -1850,6 +1855,10 @@ static const struct hid_device_id logi_dj_receivers[] = { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1), .driver_data = recvr_type_gaming_hidpp}, + {/* Logitech powerplay mat/receiver (0xc539) */ +HID_USB_DEVICE (USB_VENDOR_ID_LOGITECH , + 0xc53a), + .driver_data = recvr_type_gaming_hidpp}, { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER), .driver_data = recvr_type_27mhz},
Signature · 1 line
2.24.1