drm: Add support for Okaya RH128128T
v2 cover drm: Add support for Okaya RH128128T
Hi all,
This patch series adds support for the Okaya RH128128T LCD to the existing ST7735R driver. This is a 128x128 1.4" TFT display driven by a Sitronix ST7715R TFT Controller/Driver. It is used on e.g. the Renesas YRSK-LCD-PMOD extension board, which is shipped with Renesas RSK+RZA1 development boards[1], and with several other Renesas starter kits, for RX, Synergy, and RZ/T1 MCUs and SoCs.
Changes compared to v1[2]:
- Convert DT bindings to DT schema,
- Add YRSK-LCD-PMOD reference and links,
- Add Reviewed-by,
- Split driver preparation and adding actual support in two separate patches,
- Replace st7735r_priv.rgb by a pointer to struct st7735r_cfg,
- Change prefix of jd_t18003_t01_pipe_enable() and
jd_t18003_t01_pipe_funcs(),
- Update Kconfig help text,
- Improve file comment header.
This has been tested using the r7s72100-rskrza1-pmod-spi.dtso and r7s72100-rskrza1-pmod2-lcd.dtso DT overlays[3].
Note that for using this on RSK+RZA1, there is a dependency on RSPI cs-gpios support (now in linux-next).
With DT overlays, this also depends on DT overlays[4] and gpio-hog overlay support[5].
Thanks!
[1] https://renesasrulz.com/the_vault/f/archive-forum/4981/upgrading-to-the-renesas-rz-a1h
[1] https://lore.kernel.org/dri-devel/[email protected]/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/renesas-overlays
[4] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/overlays
[5] "[PATCH/RFC 0/2] gpio: of: Add DT overlay support for GPIO hogs"
https://lore.kernel.org/lkml/[email protected]/
Geert Uytterhoeven (5):
dt-bindings: display: sitronix,st7735r: Convert to DT schema
dt-bindings: display: sitronix,st7735r: Add Okaya RH128128T drm/mipi_dbi: Add support for display offsets
drm: tiny: st7735r: Prepare for adding support for more displays
drm: tiny: st7735r: Add support for Okaya RH128128T
.../bindings/display/sitronix,st7735r.txt | 35 --------- .../bindings/display/sitronix,st7735r.yaml | 71 +++++++++++++++++ MAINTAINERS | 2 +- drivers/gpu/drm/drm_mipi_dbi.c | 30 +++++--- drivers/gpu/drm/tiny/Kconfig | 8 +- drivers/gpu/drm/tiny/st7735r.c | 76 +++++++++++++++---- include/drm/drm_mipi_dbi.h | 12 +++ 7 files changed, 170 insertions(+), 64 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/sitronix,st7735r.txt create mode 100644 Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
Signature · 12 lines
2.17.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus TorvaldsPATCH v2 1/5 dt-bindings: display: sitronix,st7735r: Convert to DT schema
Convert the DT binding documentation for Sitronix ST7735R displays to DT schema.
Add a reference to the Adafruit 1.8" LCD while at it.
---
v2:
- New.
--- .../bindings/display/sitronix,st7735r.txt | 35 ---------- .../bindings/display/sitronix,st7735r.yaml | 65 +++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 66 insertions(+), 36 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/sitronix,st7735r.txt create mode 100644 Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
Documentation/devicetree/bindings/display/sitronix,st7735r.txt deleted +0 -35
@@ -1,35 +0,0 @@ -Sitronix ST7735R display panels - -This binding is for display panels using a Sitronix ST7735R controller in SPI -mode. - -Required properties: -- compatible: "jianda,jd-t18003-t01", "sitronix,st7735r" -- dc-gpios: Display data/command selection (D/CX) -- reset-gpios: Reset signal (RSTX) - -The node for this driver must be a child node of a SPI controller, hence -all mandatory properties described in ../spi/spi-bus.txt must be specified. - -Optional properties: -- rotation: panel rotation in degrees counter clockwise (0,90,180,270) -- backlight: phandle of the backlight device attached to the panel - -Example: - - backlight: backlight { - compatible = "gpio-backlight"; - gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - }; - - ... - - display@0{ - compatible = "jianda,jd-t18003-t01", "sitronix,st7735r"; - reg = <0>; - spi-max-frequency = <32000000>; - dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; - rotation = <270>; - backlight = &backlight; - };
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +65 -0
65 lines not on this page · raw message
MAINTAINERS +1 -1
@@ -5382,7 +5382,7 @@ M: David Lechner <[email protected]> T: git git://anongit.freedesktop.org/drm/drm-misc S: Maintained F: drivers/gpu/drm/tiny/st7735r.c -F: Documentation/devicetree/bindings/display/sitronix,st7735r.txt +F: Documentation/devicetree/bindings/display/sitronix,st7735r.yaml DRM DRIVER FOR SONY ACX424AKP PANELS M: Linus Walleij <[email protected]>
Signature · 1 line
2.17.1
Re: [PATCH v2 1/5] dt-bindings: display: sitronix,st7735r: Convert to DT schema
Hi Geert.
Thanks for doing the conversion to meta-schema.
Quoted 14 lines · Geert Uytterhoeven
Convert the DT binding documentation for Sitronix ST7735R displays to DT schema.
Add a reference to the Adafruit 1.8" LCD while at it.
Signed-off-by Geert Uytterhoeven <[email protected]>---
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +0
-0
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml line 1
Quoted 1 line
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +1
-0@@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only
Use (GPL-2.0-only OR BSD-2-Clause) for new binding files.
Quoted 6 lines
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +6
-0+%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix ST7735R Display Panels Device Tree Bindings
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml line 17
Quoted 10 lines
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +10
-0+ +maintainers: + - David Lechner <[email protected]> + +description: + This binding is for display panels using a Sitronix ST7735R controller in + SPI mode. + +allOf: + - $ref: panel/panel-common.yaml#
I am no binding expert so I do not know how to add it. But the old binding described that this MUST be a child of spi. This is missing here.
Other panels using spi does not have it - so it is probarly OK.
So with the license fixed:
Quoted 63 lines
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +48
-0+ +properties: + compatible: + oneOf: + - description: + Adafruit 1.8" 160x128 Color TFT LCD (Product ID 358 or 618) + items: + - enum: + - jianda,jd-t18003-t01 + - const: sitronix,st7735r + + spi-max-frequency: + maximum: 32000000 + + dc-gpios: + maxItems: 1 + description: Display data/command selection (D/CX) + +required: + - compatible + - reg + - dc-gpios + - reset-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0{ + compatible = "jianda,jd-t18003-t01", "sitronix,st7735r"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; + rotation = <270>; + }; + }; + +...MAINTAINERS +1
-1@@ -5382,7 +5382,7 @@ M: David Lechner <[email protected]> T: git git://anongit.freedesktop.org/drm/drm-misc S: Maintained F: drivers/gpu/drm/tiny/st7735r.c -F: Documentation/devicetree/bindings/display/sitronix,st7735r.txt +F: Documentation/devicetree/bindings/display/sitronix,st7735r.yaml DRM DRIVER FOR SONY ACX424AKP PANELS M: Linus Walleij <[email protected]>Signature · 1 line
2.17.1
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v2 1/5] dt-bindings: display: sitronix,st7735r: Convert to DT schema
Hi Sam,
Quoted 9 lines · Sam Ravnborg
Quoted 7 lines · Geert Uytterhoeven
Convert the DT binding documentation for Sitronix ST7735R displays to DT schema.
Add a reference to the Adafruit 1.8" LCD while at it.
Signed-off-by Geert Uytterhoeven <[email protected]>---
Quoted 8 lines
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml line 1
Quoted 7 lines
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +1
-0@@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-onlyUse (GPL-2.0-only OR BSD-2-Clause) for new binding files.
I used GPL-2.0-only, as this is a conversion of an existing binding file, covered by the default GPL-2.0-only of the Linux kernel source tree.
Quoted 21 lines
Quoted 6 lines
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +6
-0+%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix ST7735R Display Panels Device Tree BindingsDocumentation/devicetree/bindings/display/sitronix,st7735r.yaml line 17
Quoted 10 lines
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +10
-0+ +maintainers: + - David Lechner <[email protected]> + +description: + This binding is for display panels using a Sitronix ST7735R controller in + SPI mode. + +allOf: + - $ref: panel/panel-common.yaml#I am no binding expert so I do not know how to add it. But the old binding described that this MUST be a child of spi. This is missing here.
Quoted 1 line
Other panels using spi does not have it - so it is probarly OK.
Yeah, I couldn't find any examples of expressing that requirement in yaml.
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
David Lechner
maintainerRe: [PATCH v2 1/5] dt-bindings: display: sitronix,st7735r: Convert to DT schema
In reply to Geert UytterhoevenQuoted 71 lines · Geert Uytterhoeven
Convert the DT binding documentation for Sitronix ST7735R displays to DT schema.
Add a reference to the Adafruit 1.8" LCD while at it.
Signed-off-by Geert Uytterhoeven <[email protected]>---
v2:
- New.--- .../bindings/display/sitronix,st7735r.txt | 35 ---------- .../bindings/display/sitronix,st7735r.yaml | 65 +++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 66 insertions(+), 36 deletions(-)delete mode 100644
Documentation/devicetree/bindings/display/sitronix,st7735r.txtcreate mode 100644Documentation/devicetree/bindings/display/sitronix,st7735r.yamlDocumentation/devicetree/bindings/display/sitronix,st7735r.txt deleted +0
-35@@ -1,35 +0,0 @@ -Sitronix ST7735R display panels - -This binding is for display panels using a Sitronix ST7735R controller in SPI -mode. - -Required properties: -- compatible: "jianda,jd-t18003-t01", "sitronix,st7735r" -- dc-gpios: Display data/command selection (D/CX) -- reset-gpios: Reset signal (RSTX) - -The node for this driver must be a child node of a SPI controller, hence -all mandatory properties described in ../spi/spi-bus.txt must be specified. - -Optional properties: -- rotation: panel rotation in degrees counter clockwise (0,90,180,270) -- backlight: phandle of the backlight device attached to the panel - -Example: - - backlight: backlight { - compatible = "gpio-backlight"; - gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - }; - - ... - - display@0{ - compatible = "jianda,jd-t18003-t01", "sitronix,st7735r"; - reg = <0>; - spi-max-frequency = <32000000>; - dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; - rotation = <270>; - backlight = &backlight; - };Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +7
-0@@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sitronix ST7735R Display Panels Device Tree Bindings
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml line 17
Quoted 10 lines
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +10
-0+ +maintainers: + - David Lechner <[email protected]> + +description: + This binding is for display panels using a Sitronix ST7735R controller in + SPI mode. + +allOf: + - $ref: panel/panel-common.yaml#
not all of these properties are applicable.
Quoted 13 lines
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +13
-0+ +properties: + compatible: + oneOf: + - description: + Adafruit 1.8" 160x128 Color TFT LCD (Product ID 358 or 618) + items: + - enum: + - jianda,jd-t18003-t01 + - const: sitronix,st7735r + + spi-max-frequency: + maximum: 32000000
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml line 40
Quoted 10 lines
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +10
-0+ + dc-gpios: + maxItems: 1 + description: Display data/command selection (D/CX) + +required: + - compatible + - reg + - dc-gpios + - reset-gpios
Missing optional rotation and backlight properties.
Quoted 31 lines
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml new file +25
-0+ +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0{ + compatible = "jianda,jd-t18003-t01", "sitronix,st7735r"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; + rotation = <270>; + }; + }; + +...MAINTAINERS +0
-0
MAINTAINERS M: David Lechner <[email protected]> · line 5388
Quoted 8 lines
MAINTAINERS +1
-1@@ -5382,7 +5382,7 @@ M: David Lechner <[email protected]> T: git git://anongit.freedesktop.org/drm/drm-misc S: Maintained F: drivers/gpu/drm/tiny/st7735r.c -F: Documentation/devicetree/bindings/display/sitronix,st7735r.txt +F: Documentation/devicetree/bindings/display/sitronix,st7735r.yaml DRM DRIVER FOR SONY ACX424AKP PANELS M: Linus Walleij <[email protected]>
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 1/1 dt-bindings: restrict properties for sitronix,st7735r
Hi David.
Quoted 6 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+allOf: + - $ref: panel/panel-common.yaml#not all of these properties are applicable.
Quoted 7 lines
Review
Quoted 5 lines
(quoted diff) +5
-0+required: + - compatible + - reg + - dc-gpios + - reset-gpiosMissing optional rotation and backlight properties.
Thanks for catching this. I have written a little .yaml files since I applied this - and learned a little more of the syntax.
See attached patch for my attempt to fix this.
Please review.
Sam
From 6b54fb0a071c0732cd4bd5b88f456b5a85bcf4f2 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <[email protected]>
Date: Mon, 20 Jan 2020 19:55:04 +0100
Subject: [PATCH] dt-bindings: restrict properties for sitronix,st7735r
David Lechner noticed (paraphrased):
- not all properties from panel-common are applicable.
- missing optional rotation and backlight properties
Fix this by listing all allowed properties, and do not allow other properties.
--- .../devicetree/bindings/display/sitronix,st7735r.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml +7 -0
@@ -39,12 +39,19 @@ properties: maxItems: 1 description: Display data/command selection (D/CX) + backlight: true + reg: true + reset-gpios: true + rotation: true + required: - compatible - reg - dc-gpios - reset-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h>
Signature · 6 lines
2.20.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH] dt-bindings: restrict properties for sitronix,st7735r
Quoted 14 lines · Sam Ravnborg
Hi David.
Quoted 12 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+allOf: + - $ref: panel/panel-common.yaml#not all of these properties are applicable.
Quoted 5 lines
(quoted diff) +5
-0+required: + - compatible + - reg + - dc-gpios + - reset-gpios
Quoted 7 lines
Quoted 1 line
Missing optional rotation and backlight properties.
Thanks for catching this. I have written a little .yaml files since I applied this - and learned a little more of the syntax.
See attached patch for my attempt to fix this.
Please review.
Hi David, Geert.
Any feedback on this patch?
Sam
Quoted 56 lines
Sam
Quoted 1 line
From
6b54fb0a071c0732cd4bd5b88f456b5a85bcf4f2Mon Sep 17 00:00:00 2001From: Sam Ravnborg <[email protected]>
Date: Mon, 20 Jan 2020 19:55:04 +0100
Subject: [PATCH] dt-bindings: restrict properties for sitronix,st7735rDavid Lechner noticed (paraphrased):
- not all properties from panel-common are applicable.
- missing optional rotation and backlight propertiesFix this by listing all allowed properties, and do not allow other properties.
Fixes abdd9e3705c8 ("dt-bindings: display: sitronix,st7735r: Convert to DT schema")Reported-by David Lechner <[email protected]>Signed-off-by Sam Ravnborg <[email protected]>Cc Geert Uytterhoeven <[email protected]>Cc David Lechner <[email protected]>Cc Rob Herring <[email protected]>--- .../devicetree/bindings/display/sitronix,st7735r.yaml | 7 +++++++ 1 file changed, 7 insertions(+)Documentation/devicetree/bindings/display/sitronix,st7735r.yaml +7
-0@@ -39,12 +39,19 @@ properties: maxItems: 1 description: Display data/command selection (D/CX) + backlight: true + reg: true + reset-gpios: true + rotation: true + required: - compatible - reg - dc-gpios - reset-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h>Signature · 6 lines
2.20.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH] dt-bindings: restrict properties for sitronix,st7735r
In reply to Sam RavnborgHi Sam,
Quoted 9 lines · Sam Ravnborg
From
6b54fb0a071c0732cd4bd5b88f456b5a85bcf4f2Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <[email protected]>
Date: Mon, 20 Jan 2020 19:55:04 +0100
Subject: [PATCH] dt-bindings: restrict properties for sitronix,st7735rDavid Lechner noticed (paraphrased):
- not all properties from panel-common are applicable.
- missing optional rotation and backlight properties
Quoted 5 lines
Fix this by listing all allowed properties, and do not allow other properties.
Fixes abdd9e3705c8 ("dt-bindings: display: sitronix,st7735r: Convert to DT schema")Reported-by David Lechner <[email protected]>Signed-off-by Sam Ravnborg <[email protected]>
I'm far from a DT yaml expert, but LGTM, so:
Gr{oetje,eeting}s,
Geert
Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Re: [PATCH] dt-bindings: restrict properties for sitronix,st7735r
Hi Geert & Rob.
Quoted 12 lines · Geert Uytterhoeven
Hi Sam,
Quoted 9 lines · Sam Ravnborg
From
6b54fb0a071c0732cd4bd5b88f456b5a85bcf4f2Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <[email protected]>
Date: Mon, 20 Jan 2020 19:55:04 +0100
Subject: [PATCH] dt-bindings: restrict properties for sitronix,st7735rDavid Lechner noticed (paraphrased):
- not all properties from panel-common are applicable.
- missing optional rotation and backlight properties
Quoted 8 lines
Quoted 5 lines
Fix this by listing all allowed properties, and do not allow other properties.
Fixes abdd9e3705c8 ("dt-bindings: display: sitronix,st7735r: Convert to DT schema")Reported-by David Lechner <[email protected]>Signed-off-by Sam Ravnborg <[email protected]>I'm far from a DT yaml expert, but LGTM, so:
Reviewed-by Geert Uytterhoeven <[email protected]>
Thanks, now pushed to drm-misc-next.
Sam
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH] dt-bindings: restrict properties for sitronix,st7735r
In reply to Sam RavnborgQuoted 42 lines · Sam Ravnborg
Hi David.
Quoted 6 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+allOf: + - $ref: panel/panel-common.yaml#not all of these properties are applicable.
Quoted 7 lines
Review
Quoted 5 lines
(quoted diff) +5
-0+required: + - compatible + - reg + - dc-gpios + - reset-gpiosMissing optional rotation and backlight properties.
Thanks for catching this. I have written a little .yaml files since I applied this - and learned a little more of the syntax.
See attached patch for my attempt to fix this.
Please review.Sam
From
6b54fb0a071c0732cd4bd5b88f456b5a85bcf4f2Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <[email protected]>
Date: Mon, 20 Jan 2020 19:55:04 +0100
Subject: [PATCH] dt-bindings: restrict properties for sitronix,st7735rDavid Lechner noticed (paraphrased):
- not all properties from panel-common are applicable.
- missing optional rotation and backlight propertiesFix this by listing all allowed properties, and do not allow other properties.
Fixes abdd9e3705c8 ("dt-bindings: display: sitronix,st7735r: Convert to DT schema")Reported-by David Lechner <[email protected]>Signed-off-by Sam Ravnborg <[email protected]>Cc Geert Uytterhoeven <[email protected]>Cc David Lechner <[email protected]>Cc Rob Herring <[email protected]>
Quoted 3 lines
--- .../devicetree/bindings/display/sitronix,st7735r.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
PATCH v2 2/5 dt-bindings: display: sitronix,st7735r: Add Okaya RH128128T
In reply to Geert UytterhoevenDocument support for the Okaya RH128128T display, which is a 128x128 1.44" TFT display driven by a Sitronix ST7715R TFT Controller/Driver. It can be found on e.g. the Renesas YRSK-LCD-PMOD extension board, which comes with various Renesas development kits (e.g. Renesas Starter Kit+ for RZ/A1H[1]).
ST7715R and ST7735R are very similar. Their major difference is that the former is restricted to displays of up to 132x132 pixels, while the latter supports displays up to 132x162 pixels.
[1] https://renesasrulz.com/the_vault/f/archive-forum/4981/upgrading-to-the-renesas-rz-a1h
---
v2:
- Rebase on top of DT schema conversion,
- Add YRSK-LCD-PMOD reference and links.
--- .../devicetree/bindings/display/sitronix,st7735r.yaml | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/display/sitronix,st7735r.yaml +8 -2
@@ -10,8 +10,8 @@ maintainers: - David Lechner <[email protected]> description: - This binding is for display panels using a Sitronix ST7735R controller in - SPI mode. + This binding is for display panels using a Sitronix ST7715R or ST7735R + controller in SPI mode. allOf: - $ref: panel/panel-common.yaml#
@@ -25,6 +25,12 @@ properties: - enum: - jianda,jd-t18003-t01 - const: sitronix,st7735r + - description: + Okaya 1.44" 128x128 Color TFT LCD (E.g. Renesas YRSK-LCD-PMOD) + items: + - enum: + - okaya,rh128128t + - const: sitronix,st7715r spi-max-frequency: maximum: 32000000
Signature · 1 line
2.17.1
Re: [PATCH v2 2/5] dt-bindings: display: sitronix,st7735r: Add Okaya RH128128T
Quoted 6 lines · Geert Uytterhoeven
Document support for the Okaya RH128128T display, which is a 128x128 1.44" TFT display driven by a Sitronix ST7715R TFT Controller/Driver. It can be found on e.g. the Renesas YRSK-LCD-PMOD extension board, which comes with various Renesas development kits (e.g. Renesas Starter Kit+ for RZ/A1H[1]).
Quoted 7 lines
ST7715R and ST7735R are very similar. Their major difference is that the former is restricted to displays of up to 132x132 pixels, while the latter supports displays up to 132x162 pixels.
[1] https://renesasrulz.com/the_vault/f/archive-forum/4981/upgrading-to-the-renesas-rz-a1h
Signed-off-by Geert Uytterhoeven <[email protected]>
Quoted 38 lines
---
v2:
- Rebase on top of DT schema conversion,
- Add YRSK-LCD-PMOD reference and links.--- .../devicetree/bindings/display/sitronix,st7735r.yaml | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)Documentation/devicetree/bindings/display/sitronix,st7735r.yaml +8
-2@@ -10,8 +10,8 @@ maintainers: - David Lechner <[email protected]> description: - This binding is for display panels using a Sitronix ST7735R controller in - SPI mode. + This binding is for display panels using a Sitronix ST7715R or ST7735R + controller in SPI mode. allOf: - $ref: panel/panel-common.yaml#@@ -25,6 +25,12 @@ properties: - enum: - jianda,jd-t18003-t01 - const: sitronix,st7735r + - description: + Okaya 1.44" 128x128 Color TFT LCD (E.g. Renesas YRSK-LCD-PMOD) + items: + - enum: + - okaya,rh128128t + - const: sitronix,st7715r spi-max-frequency: maximum: 32000000Signature · 1 line
2.17.1
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 3/5 drm/mipi_dbi: Add support for display offsets
In reply to Geert UytterhoevenIf the resolution of the TFT display is smaller than the maximum resolution supported by the display controller, the display may be connected to the driver output arrays with a horizontal and/or vertical offset, leading to a shifted image.
Add support for specifying these offsets.
---
v2:
- Add Reviewed-by.
--- drivers/gpu/drm/drm_mipi_dbi.c | 30 ++++++++++++++++++++---------- include/drm/drm_mipi_dbi.h | 12 ++++++++++++ 2 files changed, 32 insertions(+), 10 deletions(-)
drivers/gpu/drm/drm_mipi_dbi.c +20 -10
@@ -238,6 +238,23 @@ int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb, }EXPORT_SYMBOL (mipi_dbi_buf_copy); +static void mipi_dbi_set_window_address (struct mipi_dbi_dev *dbidev, +unsigned int xs,unsigned int xe, +unsigned int ys,unsigned int ye) +{ +struct mipi_dbi *dbi = &dbidev->dbi; + + xs += dbidev->left_offset; + xe += dbidev->left_offset; + ys += dbidev->top_offset; + ye += dbidev->top_offset; + +mipi_dbi_command (dbi,MIPI_DCS_SET_COLUMN_ADDRESS , (xs >>8 ) &0xff , + xs &0xff , (xe >>8 ) &0xff , xe &0xff ); +mipi_dbi_command (dbi,MIPI_DCS_SET_PAGE_ADDRESS , (ys >>8 ) &0xff , + ys &0xff , (ye >>8 ) &0xff , ye &0xff ); +} +static void mipi_dbi_fb_dirty (struct drm_framebuffer *fb,struct drm_rect *rect) {struct drm_gem_object *gem =drm_gem_fb_get_obj (fb,0 );
@@ -271,12 +288,8 @@ static void mipi_dbi_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect) tr = cma_obj->vaddr; } -mipi_dbi_command (dbi,MIPI_DCS_SET_COLUMN_ADDRESS , - (rect->x1 >>8 ) &0xff , rect->x1 &0xff , - ((rect->x2 -1 ) >>8 ) &0xff , (rect->x2 -1 ) &0xff ); -mipi_dbi_command (dbi,MIPI_DCS_SET_PAGE_ADDRESS , - (rect->y1 >>8 ) &0xff , rect->y1 &0xff , - ((rect->y2 -1 ) >>8 ) &0xff , (rect->y2 -1 ) &0xff ); +mipi_dbi_set_window_address (dbidev, rect->x1, rect->x2 -1 , rect->y1, + rect->y2 -1 ); ret =mipi_dbi_command_buf (dbi,MIPI_DCS_WRITE_MEMORY_START , tr, width * height *2 );
@@ -366,10 +379,7 @@ static void mipi_dbi_blank(struct mipi_dbi_dev *dbidev)memset (dbidev->tx_buf,0 , len); -mipi_dbi_command (dbi,MIPI_DCS_SET_COLUMN_ADDRESS ,0 ,0 , - ((width -1 ) >>8 ) &0xFF , (width -1 ) &0xFF ); -mipi_dbi_command (dbi,MIPI_DCS_SET_PAGE_ADDRESS ,0 ,0 , - ((height -1 ) >>8 ) &0xFF , (height -1 ) &0xFF ); +mipi_dbi_set_window_address (dbidev,0 , width -1 ,0 , height -1 );mipi_dbi_command_buf (dbi,MIPI_DCS_WRITE_MEMORY_START , (u8 *)dbidev->tx_buf, len);
include/drm/drm_mipi_dbi.h +12 -0
@@ -109,6 +109,18 @@ struct mipi_dbi_dev {*/ unsigned int rotation; +/** +* @left_offset: Horizontal offset of the display relative to the +* controller's driver array +*/ +unsigned int left_offset; + +/** +* @top_offset: Vertical offset of the display relative to the +* controller's driver array +*/ +unsigned int top_offset; +/** * @backlight: backlight device (optional) */
Signature · 1 line
2.17.1
Re: [PATCH v2 3/5] drm/mipi_dbi: Add support for display offsets
Hi Noralf.
If you could find time to review this patch it would be great. I am reluctant to apply it until you have acked/reviewed it.
Thanks in advance,
Sam
Quoted 97 lines · Geert Uytterhoeven
If the resolution of the TFT display is smaller than the maximum resolution supported by the display controller, the display may be connected to the driver output arrays with a horizontal and/or vertical offset, leading to a shifted image.
Add support for specifying these offsets.
Signed-off-by Geert Uytterhoeven <[email protected]>Reviewed-by Sam Ravnborg <[email protected]>---
v2:
- Add Reviewed-by.--- drivers/gpu/drm/drm_mipi_dbi.c | 30 ++++++++++++++++++++---------- include/drm/drm_mipi_dbi.h | 12 ++++++++++++ 2 files changed, 32 insertions(+), 10 deletions(-)drivers/gpu/drm/drm_mipi_dbi.c +20
-10@@ -238,6 +238,23 @@ int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb, }EXPORT_SYMBOL (mipi_dbi_buf_copy); +static void mipi_dbi_set_window_address (struct mipi_dbi_dev *dbidev, +unsigned int xs,unsigned int xe, +unsigned int ys,unsigned int ye) +{ +struct mipi_dbi *dbi = &dbidev->dbi; + + xs += dbidev->left_offset; + xe += dbidev->left_offset; + ys += dbidev->top_offset; + ye += dbidev->top_offset; + +mipi_dbi_command (dbi,MIPI_DCS_SET_COLUMN_ADDRESS , (xs >>8 ) &0xff , + xs &0xff , (xe >>8 ) &0xff , xe &0xff ); +mipi_dbi_command (dbi,MIPI_DCS_SET_PAGE_ADDRESS , (ys >>8 ) &0xff , + ys &0xff , (ye >>8 ) &0xff , ye &0xff ); +} +static void mipi_dbi_fb_dirty (struct drm_framebuffer *fb,struct drm_rect *rect) {struct drm_gem_object *gem =drm_gem_fb_get_obj (fb,0 );@@ -271,12 +288,8 @@ static void mipi_dbi_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect) tr = cma_obj->vaddr; } -mipi_dbi_command (dbi,MIPI_DCS_SET_COLUMN_ADDRESS , - (rect->x1 >>8 ) &0xff , rect->x1 &0xff , - ((rect->x2 -1 ) >>8 ) &0xff , (rect->x2 -1 ) &0xff ); -mipi_dbi_command (dbi,MIPI_DCS_SET_PAGE_ADDRESS , - (rect->y1 >>8 ) &0xff , rect->y1 &0xff , - ((rect->y2 -1 ) >>8 ) &0xff , (rect->y2 -1 ) &0xff ); +mipi_dbi_set_window_address (dbidev, rect->x1, rect->x2 -1 , rect->y1, + rect->y2 -1 ); ret =mipi_dbi_command_buf (dbi,MIPI_DCS_WRITE_MEMORY_START , tr, width * height *2 );@@ -366,10 +379,7 @@ static void mipi_dbi_blank(struct mipi_dbi_dev *dbidev)memset (dbidev->tx_buf,0 , len); -mipi_dbi_command (dbi,MIPI_DCS_SET_COLUMN_ADDRESS ,0 ,0 , - ((width -1 ) >>8 ) &0xFF , (width -1 ) &0xFF ); -mipi_dbi_command (dbi,MIPI_DCS_SET_PAGE_ADDRESS ,0 ,0 , - ((height -1 ) >>8 ) &0xFF , (height -1 ) &0xFF ); +mipi_dbi_set_window_address (dbidev,0 , width -1 ,0 , height -1 );mipi_dbi_command_buf (dbi,MIPI_DCS_WRITE_MEMORY_START , (u8 *)dbidev->tx_buf, len);include/drm/drm_mipi_dbi.h +12
-0@@ -109,6 +109,18 @@ struct mipi_dbi_dev {*/ unsigned int rotation; +/** +* @left_offset: Horizontal offset of the display relative to the +* controller's driver array +*/ +unsigned int left_offset; + +/** +* @top_offset: Vertical offset of the display relative to the +* controller's driver array +*/ +unsigned int top_offset; +/** * @backlight: backlight device (optional) */ Signature · 1 line
2.17.1
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH v2 3/5] drm/mipi_dbi: Add support for display offsets
In reply to Geert UytterhoevenDen 15.01.2020 13.45, skrev Geert Uytterhoeven:
Quoted 10 lines
If the resolution of the TFT display is smaller than the maximum resolution supported by the display controller, the display may be connected to the driver output arrays with a horizontal and/or vertical offset, leading to a shifted image.
Add support for specifying these offsets.
Signed-off-by Geert Uytterhoeven <[email protected]>Reviewed-by Sam Ravnborg <[email protected]>---
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 4/5 drm: tiny: st7735r: Prepare for adding support for more displays
In reply to Geert UytterhoevenCurrently the st7735r driver supports only a single display panel. Prepare for adding support for other display panels by factoring out the display-specific parameters in struct st7735r_cfg.
For now, the following parameters can be configured:
- Display resolution,
- Horizontal/vertical display offsets,
- Read-write versus read-only controllers,
- RGB versus BGR color component ordering.
Rename jd_t18003_t01_pipe_enable() and jd_t18003_t01_pipe_funcs() to st7735r_pipe_enable() resp. st7735r_pipe_funcs(), as they are not really specific to the Jianda JD-T18003-T01 display anymore.
---
v2:
- Split off from "drm: tiny: st7735r: Add support for Okaya
RH128128T",
- Replace st7735r_priv.rgb by a pointer to struct st7735r_cfg,
- Change prefix of jd_t18003_t01_pipe_enable() and
jd_t18003_t01_pipe_funcs().
---
drivers/gpu/drm/tiny/st7735r.c | 67 +++++++++++++++++++++++++++-------
1 file changed, 53 insertions(+), 14 deletions(-)drivers/gpu/drm/tiny/st7735r.c +53 -14
@@ -3,6 +3,7 @@* DRM driver for Sitronix ST7735R panels * * Copyright 2017 David Lechner <[email protected]> +* Copyright (C) 2019 Glider bvba */ #include <linux/backlight.h>
@@ -10,6 +11,7 @@#include <linux/dma-buf.h> #include <linux/gpio/consumer.h> #include <linux/module.h> +#include <linux/of_device.h> #include <linux/property.h> #include <linux/spi/spi.h> #include <video/mipi_display.h>
@@ -37,12 +39,28 @@#define ST7735R_MY BIT(7)#define ST7735R_MX BIT(6)#define ST7735R_MV BIT(5) +#define ST7735R_RGB BIT(3) + +struct st7735r_cfg { +const struct drm_display_mode mode; +unsigned int left_offset; +unsigned int top_offset; +unsigned int write_only:1 ; +unsigned int rgb:1 ;/* RGB (vs. BGR) */ +}; + +struct st7735r_priv { +struct mipi_dbi_dev dbidev;/* Must be first for .release() */ +const struct st7735r_cfg *cfg; +}; -static void jd_t18003_t01_pipe_enable (struct drm_simple_display_pipe *pipe, -struct drm_crtc_state *crtc_state, -struct drm_plane_state *plane_state) +static void st7735r_pipe_enable (struct drm_simple_display_pipe *pipe, +struct drm_crtc_state *crtc_state, +struct drm_plane_state *plane_state) {struct mipi_dbi_dev *dbidev =drm_to_mipi_dbi_dev (pipe->crtc.dev); + struct st7735r_priv *priv = container_of(dbidev, struct st7735r_priv, + dbidev);struct mipi_dbi *dbi = &dbidev->dbi;int ret, idx;u8 addr_mode;
@@ -87,6 +105,10 @@ static void jd_t18003_t01_pipe_enable(struct drm_simple_display_pipe *pipe, addr_mode =ST7735R_MY |ST7735R_MV ;break ; } + +if (priv->cfg->rgb) + addr_mode |=ST7735R_RGB ; +mipi_dbi_command (dbi,MIPI_DCS_SET_ADDRESS_MODE , addr_mode);mipi_dbi_command (dbi,MIPI_DCS_SET_PIXEL_FORMAT ,MIPI_DCS_PIXEL_FMT_16BIT );
@@ -109,15 +131,19 @@ static void jd_t18003_t01_pipe_enable(struct drm_simple_display_pipe *pipe,drm_dev_exit (idx); } -static const struct drm_simple_display_pipe_funcs jd_t18003_t01_pipe_funcs = { - .enable = jd_t18003_t01_pipe_enable, +static const struct drm_simple_display_pipe_funcs st7735r_pipe_funcs = { + .enable = st7735r_pipe_enable, .disable = mipi_dbi_pipe_disable, .update = mipi_dbi_pipe_update, .prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb, }; -static const struct drm_display_mode jd_t18003_t01_mode = { -DRM_SIMPLE_MODE (128 ,160 ,28 ,35 ), +static const struct st7735r_cfg jd_t18003_t01_cfg = { + .mode = {DRM_SIMPLE_MODE (128 ,160 ,28 ,35 ) }, +/* Cannot read from Adafruit 1.8" display via SPI */ + .write_only = true, +}; + };DEFINE_DRM_GEM_CMA_FOPS (st7735r_fops);
@@ -136,13 +162,13 @@ static struct drm_driver st7735r_driver = { };static const struct of_device_id st7735r_of_match[] = { - { .compatible ="jianda,jd-t18003-t01" }, + { .compatible ="jianda,jd-t18003-t01" , .data = &jd_t18003_t01_cfg }, { }, };MODULE_DEVICE_TABLE (of, st7735r_of_match);static const struct spi_device_id st7735r_id[] = { - {"jd-t18003-t01" ,0 }, + {"jd-t18003-t01" , (uintptr_t )&jd_t18003_t01_cfg }, { }, };MODULE_DEVICE_TABLE (spi, st7735r_id);
@@ -150,17 +176,26 @@ MODULE_DEVICE_TABLE(spi, st7735r_id);static int st7735r_probe (struct spi_device *spi) {struct device *dev = &spi->dev; +const struct st7735r_cfg *cfg;struct mipi_dbi_dev *dbidev; +struct st7735r_priv *priv;struct drm_device *drm;struct mipi_dbi *dbi;struct gpio_desc *dc;u32 rotation =0 ;int ret; - dbidev =kzalloc (sizeof (*dbidev),GFP_KERNEL ); -if (!dbidev) + cfg =of_device_get_match_data (&spi->dev); +if (!cfg) + cfg = (void *)spi_get_device_id (spi)->driver_data; + + priv =kzalloc (sizeof (*priv),GFP_KERNEL ); +if (!priv)return -ENOMEM ; + dbidev = &priv->dbidev; + priv->cfg = cfg; + dbi = &dbidev->dbi; drm = &dbidev->drm; ret =devm_drm_dev_init (dev, drm, &st7735r_driver);
@@ -193,10 +228,14 @@ static int st7735r_probe(struct spi_device *spi)if (ret)return ret; -/* Cannot read from Adafruit 1.8" display via SPI */ - dbi->read_commands =NULL ; +if (cfg->write_only) + dbi->read_commands =NULL ; + + dbidev->left_offset = cfg->left_offset; + dbidev->top_offset = cfg->top_offset; - ret =mipi_dbi_dev_init (dbidev, &jd_t18003_t01_pipe_funcs, &jd_t18003_t01_mode, rotation); + ret =mipi_dbi_dev_init (dbidev, &st7735r_pipe_funcs, &cfg->mode, + rotation);if (ret)return ret;
Signature · 6 lines
2.17.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 5/5 drm: tiny: st7735r: Add support for Okaya RH128128T
In reply to Geert UytterhoevenAdd support for the Okaya RH128128T display to the st7735r driver on DT-enabled systems.
The RH128128T is a 128x128 1.44" TFT display driven by a Sitronix ST7715R TFT Controller/Driver. The latter is very similar to the ST7735R, and can be handled by the existing st7735r driver.
---
v2:
- Split in two patches,
- Update Kconfig help text,
- Improve file comment header.
--- drivers/gpu/drm/tiny/Kconfig | 8 +++++--- drivers/gpu/drm/tiny/st7735r.c | 9 ++++++++- 2 files changed, 13 insertions(+), 4 deletions(-)
drivers/gpu/drm/tiny/Kconfig +5 -3
@@ -85,14 +85,16 @@ config TINYDRM_ST7586 If M is selected the module will be called st7586. config TINYDRM_ST7735R - tristate "DRM support for Sitronix ST7735R display panels" + tristate "DRM support for Sitronix ST7715R/ST7735R display panels" depends on DRM && SPI select DRM_KMS_HELPER select DRM_KMS_CMA_HELPER select DRM_MIPI_DBI select BACKLIGHT_CLASS_DEVICE help - DRM driver Sitronix ST7735R with one of the following LCDs: - * JD-T18003-T01 1.8" 128x160 TFT + DRM driver for Sitronix ST7715R/ST7735R with one of the following + LCDs: + * Jianda JD-T18003-T01 1.8" 128x160 TFT + * Okaya RH128128T 1.44" 128x128 TFT If M is selected the module will be called st7735r.
drivers/gpu/drm/tiny/st7735r.c +8 -1
@@ -1,6 +1,7 @@// SPDX-License-Identifier: GPL-2.0+ /* -* DRM driver for Sitronix ST7735R panels +* DRM driver for display panels connected to a Sitronix ST7715R or ST7735R +* display controller in SPI mode. * * Copyright 2017 David Lechner <[email protected]> * Copyright (C) 2019 Glider bvba
@@ -144,6 +145,11 @@ static const struct st7735r_cfg jd_t18003_t01_cfg = { .write_only = true, }; +static const struct st7735r_cfg rh128128t_cfg = { + .mode = {DRM_SIMPLE_MODE (128 ,128 ,25 ,26 ) }, + .left_offset =2 , + .top_offset =3 , + .rgb = true, };DEFINE_DRM_GEM_CMA_FOPS (st7735r_fops);
@@ -163,6 +169,7 @@ static struct drm_driver st7735r_driver = {static const struct of_device_id st7735r_of_match[] = { { .compatible ="jianda,jd-t18003-t01" , .data = &jd_t18003_t01_cfg }, + { .compatible ="okaya,rh128128t" , .data = &rh128128t_cfg }, { }, };MODULE_DEVICE_TABLE (of, st7735r_of_match);
Signature · 1 line
2.17.1
Hi Geert.
Quoted 35 lines · Geert Uytterhoeven
Hi all,
This patch series adds support for the Okaya RH128128T LCD to the existing ST7735R driver. This is a 128x128 1.4" TFT display driven by a Sitronix ST7715R TFT Controller/Driver. It is used on e.g. the Renesas YRSK-LCD-PMOD extension board, which is shipped with Renesas RSK+RZA1 development boards[1], and with several other Renesas starter kits, for RX, Synergy, and RZ/T1 MCUs and SoCs.
Changes compared to v1[2]:
- Convert DT bindings to DT schema,
- Add YRSK-LCD-PMOD reference and links,
- Add Reviewed-by,
- Split driver preparation and adding actual support in two separate patches,
- Replace st7735r_priv.rgb by a pointer to structst7735r_cfg,
- Change prefix ofjd_t18003_t01_pipe_enable()andjd_t18003_t01_pipe_funcs(),- Update
Kconfighelp text,
- Improve file comment header.This has been tested using the r7s72100-rskrza1-pmod-spi.dtso and r7s72100-rskrza1-pmod2-lcd.dtso DT overlays[3].
Note that for using this on RSK+RZA1, there is a dependency on RSPI cs-gpios support (now in linux-next).
With DT overlays, this also depends on DT overlays[4] and gpio-hog overlay support[5].Thanks!
[1] https://renesasrulz.com/the_vault/f/archive-forum/4981/upgrading-to-the-renesas-rz-a1h
[1] https://lore.kernel.org/dri-devel/[email protected]/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/renesas-overlays
[4] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/overlays
[5] "[PATCH/RFC 0/2] gpio: of: Add DT overlay support for GPIO hogs"
Quoted 8 lines
https://lore.kernel.org/lkml/[email protected]/Geert Uytterhoeven (5):
dt-bindings: display: sitronix,st7735r: Convert to DT schema
dt-bindings: display: sitronix,st7735r: Add Okaya RH128128T drm/mipi_dbi: Add support for display offsets
drm: tiny: st7735r: Prepare for adding support for more displays
drm: tiny: st7735r: Add support for Okaya RH128128T
Thanks, it ended up with a nice small patch adding support for another controller/panel combo to this driver.
All 5 patches applied to drm-misc-next.
Sam
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel