Skip to contentSkip to conversation

net: phylink: Allow 2.5BASE-T, 5GBASE-T and 10GBASE-T for the 10G link modes

PATCH New Vladimir Oltean 1 participant 1 message Jan 16, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: phylink: Allow 2.5BASE-T, 5GBASE-T and 10GBASE-T for the 10G link modes

From: Vladimir Oltean <[email protected]>

For some reason, PHYLINK does not put the copper modes for 802.3bz (NBASE-T) and 802.3an-2006 (10GBASE-T) in the PHY's supported mask, when the PHY-MAC connection is a 10G-capable one (10GBase-KR, 10GBase-R, USXGMII). One possible way through which the cable side can work at the lower speed is by having the PHY emit PAUSE frames towards the MAC. So fix that omission.

Also include the 2500Base-X fiber mode in this list while we're at it.

---
Resent to include [email protected] in Cc (missed the first time).

 drivers/net/phy/phylink.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/phy/phylink.c +4 -0
index f40d92ec32f8..e5a0f9c75042 100644
@@ -308,6 +308,10 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
 			phylink_set(pl->supported, 1000baseT_Half);
 			phylink_set(pl->supported, 1000baseT_Full);
 			phylink_set(pl->supported, 1000baseX_Full);
+			phylink_set(pl->supported, 2500baseT_Full);
+			phylink_set(pl->supported, 2500baseX_Full);
+			phylink_set(pl->supported, 5000baseT_Full);
+			phylink_set(pl->supported, 10000baseT_Full);
 			phylink_set(pl->supported, 10000baseKR_Full);
 			phylink_set(pl->supported, 10000baseCR_Full);
 			phylink_set(pl->supported, 10000baseSR_Full);
Signature · 1 line
2.17.1