clk: at91: add at91sam9n12 pmc driver
Subsystems (2)
Alexandre Belloni
maintainerPATCH v2 1/1 clk: at91: add at91sam9n12 pmc driver
Add a driver for the PMC clocks of the at91sam9n12 family.
Signed-off-by Alexandre Belloni <[email protected]>
---
Changes in v2:
- use nck for the number of peripheral clocks
- correct alignment
drivers/clk/at91/Makefile | 3 +- drivers/clk/at91/at91sam9n12.c | 239 +++++++++++++++++++++++++++++++++ 2 files changed, 241 insertions(+), 1 deletion(-) create mode 100644 drivers/clk/at91/at91sam9n12.c
drivers/clk/at91/Makefile +2 -1
@@ -15,7 +15,8 @@ obj-$(CONFIG_HAVE_AT91_H32MX) += clk-h32mx.o obj-$(CONFIG_HAVE_AT91_GENERATED_CLK) += clk-generated.o obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK) += clk-i2s-mux.o obj-$(CONFIG_HAVE_AT91_SAM9X60_PLL) += clk-sam9x60-pll.o -obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o +obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o +obj-$(CONFIG_SOC_AT91SAM9) += at91sam9n12.o at91sam9x5.o obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
drivers/clk/at91/at91sam9n12.c new file +239 -0
239 lines not on this page · raw message
Signature · 1 line
2.24.1