Skip to contentSkip to conversation

KASan for arm

PATCH In review Florian Fainelli 3 participants 11 messages Jan 17, 2020 – Apr 12, 2020

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

v7 cover KASan for arm

Hi all,

Abbott submitted a v5 about a year ago here:

and the series was not picked up since then, so I rebased it against v5.2-rc4 and re-tested it on a Brahma-B53 (ARMv8 running AArch32 mode) and Brahma-B15, both LPAE and test-kasan is consistent with the ARM64 counter part.

We were in a fairly good shape last time with a few different people having tested it, so I am hoping we can get that included for 5.4 if everything goes well.

Changelog:

v7 - v7
- add Linus' Tested-by for the following platforms:

Tested systems:

QEMU ARM RealView PBA8
QEMU ARM RealView PBX A9
QEMU ARM Versatile AB
Hardware Integrator CP
Hardware Versatile AB with IB2

- define CONFIG_KASAN_SHADOW_OFFSET

v6 - v5
- Resolve conflicts during rebase, and updated to make use of kasan_early_shadow_pte instead of kasan_zero_pte

v5 - v4
- Modify Andrey Ryabinin's email address.

v4 - v3
- Remove the fix of type conversion in kasan_cache_create because it has been fix in the latest version in:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
- Change some Reviewed-by tag into Reported-by tag to avoid misleading. ---Reported by: Marc Zyngier <[email protected]> Russell King - ARM Linux <[email protected]>
- Disable instrumentation for arch/arm/mm/physaddr.c

v3 - v2
- Remove this patch: 2 1-byte checks more safer for memory_is_poisoned_16 because a unaligned load/store of 16 bytes is rare on arm, and this patch is very likely to affect the performance of modern CPUs. ---Acked by: Russell King - ARM Linux <[email protected]>
- Fixed some link error which kasan_pmd_populate,kasan_pte_populate and kasan_pud_populate are in section .meminit.text but the function kasan_alloc_block which is called by kasan_pmd_populate, kasan_pte_populate and kasan_pud_populate is in section .init.text. So we need change kasan_pmd_populate,kasan_pte_populate and kasan_pud_populate into the section .init.text.
---Reported by: Florian Fainelli <[email protected]>
- Fixed some compile error which caused by the wrong access instruction in arch/arm/kernel/entry-common.S.
---Reported by: kbuild test robot <[email protected]>
- Disable instrumentation for arch/arm/kvm/hyp/*.
---Acked by: Marc Zyngier <[email protected]>
- Update the set of supported architectures in Documentation/dev-tools/kasan.rst.
---Acked by:Dmitry Vyukov <[email protected]>
- The version 2 is tested by:
Florian Fainelli <[email protected]> (compile test)
kbuild test robot <[email protected]> (compile test)
Joel Stanley <[email protected]> (on ASPEED ast2500(ARMv5))

v2 - v1
- Fixed some compiling error which happens on changing kernel compression mode to lzma/xz/lzo/lz4.
---Reported by: Florian Fainelli <[email protected]>,
Russell King - ARM Linux <[email protected]>
- Fixed a compiling error cause by some older arm instruction set(armv4t) don't suppory movw/movt which is reported by kbuild.
- Changed the pte flag from _L_PTE_DEFAULT | L_PTE_DIRTY | L_PTE_XN to pgprot_val(PAGE_KERNEL).
---Reported by: Russell King - ARM Linux <[email protected]>
- Moved Enable KASan patch as the last one.
---Reported by: Florian Fainelli <[email protected]>,
Russell King - ARM Linux <[email protected]>
- Moved the definitions of cp15 registers from arch/arm/include/asm/kvm_hyp.h to arch/arm/include/asm/cp15.h. ---Asked by: Mark Rutland <[email protected]>
- Merge the following commits into the commit
Define the virtual space of KASan's shadow region:
1) Define the virtual space of KASan's shadow region;
2) Avoid cleaning the KASan shadow area's mapping table;
3) Add KASan layout;
- Merge the following commits into the commit
Initialize the mapping of KASan shadow memory:
1) Initialize the mapping of KASan shadow memory;
2) Add support arm LPAE;
3) Don't need to map the shadow of KASan's shadow memory; ---Reported by: Russell King - ARM Linux <[email protected]>
4) Change mapping of kasan_zero_page int readonly.
- The version 1 is tested by Florian Fainelli <[email protected]> on a Cortex-A5 (no LPAE).

Hi,all:
These patches add arch specific code for kernel address sanitizer
(see Documentation/kasan.txt).

1/8 of kernel addresses reserved for shadow memory. There was no
big enough hole for this, so virtual addresses for shadow were stolen from user space.

At early boot stage the whole shadow region populated with just
one physical page (kasan_zero_page). Later, this page reused as readonly zero shadow for some memory that KASan currently don't track (vmalloc).

After mapping the physical memory, pages for shadow memory are
allocated and mapped.

KASan's stack instrumentation significantly increases stack's
consumption, so CONFIG_KASAN doubles THREAD_SIZE.

Functions like memset/memmove/memcpy do a lot of memory accesses.
If bad pointer passed to one of these function it is important to catch this. Compiler's instrumentation cannot do this since these functions are written in assembly.

KASan replaces memory functions with manually instrumented variants.
Original functions declared as weak symbols so strong definitions in mm/kasan/kasan.c could replace them. Original functions have aliases with '__' prefix in name, so we could call non-instrumented variant if needed.

Some files built without kasan instrumentation (e.g. mm/slub.c).
Original mem* function replaced (via #define) with prefixed variants to disable memory access checks for such files.

On arm LPAE architecture, the mapping table of KASan shadow memory(if
PAGE_OFFSET is 0xc0000000, the KASan shadow memory's virtual space is 0xb6e000000~0xbf000000) can't be filled in do_translation_fault function, because kasan instrumentation maybe cause do_translation_fault function accessing KASan shadow memory. The accessing of KASan shadow memory in do_translation_fault function maybe cause dead circle. So the mapping table of KASan shadow memory need be copyed in pgd_alloc function.

Most of the code comes from:
https://github.com/aryabinin/linux/commit/0b54f17e70ff50a902c4af05bb92716eb95acefe

These patches are tested on vexpress-ca15, vexpress-ca9

Abbott Liu (2):
ARM: Add TTBR operator for kasan_init
ARM: Define the virtual space of KASan's shadow region

Andrey Ryabinin (4):
ARM: Disable instrumentation for some code
ARM: Replace memory function for kasan
ARM: Initialize the mapping of KASan shadow memory
ARM: Enable KASan for ARM

Florian Fainelli (1):
ARM: Moved CP15 definitions from kvm_hyp.h to cp15.h

 Documentation/dev-tools/kasan.rst     |   4 +-
 arch/arm/Kconfig                      |   9 +
 arch/arm/boot/compressed/Makefile     |   2 +
 arch/arm/include/asm/cp15.h           | 107 +++++++++
 arch/arm/include/asm/kasan.h          |  35 +++
 arch/arm/include/asm/kasan_def.h      |  63 ++++++
 arch/arm/include/asm/kvm_hyp.h        |  54 -----
 arch/arm/include/asm/memory.h         |   5 +
 arch/arm/include/asm/pgalloc.h        |   9 +-
 arch/arm/include/asm/string.h         |  17 ++
 arch/arm/include/asm/thread_info.h    |   4 +
 arch/arm/kernel/entry-armv.S          |   5 +-
 arch/arm/kernel/entry-common.S        |   9 +-
 arch/arm/kernel/head-common.S         |   7 +-
 arch/arm/kernel/setup.c               |   2 +
 arch/arm/kernel/unwind.c              |   6 +-
 arch/arm/kvm/hyp/cp15-sr.c            |  12 +-
 arch/arm/kvm/hyp/switch.c             |   6 +-
 arch/arm/lib/memcpy.S                 |   3 +
 arch/arm/lib/memmove.S                |   5 +-
 arch/arm/lib/memset.S                 |   3 +
 arch/arm/mm/Makefile                  |   4 +
 arch/arm/mm/kasan_init.c              | 302 ++++++++++++++++++++++++++
 arch/arm/mm/mmu.c                     |   7 +-
 arch/arm/mm/pgd.c                     |  14 ++
 arch/arm/vdso/Makefile                |   2 +
 drivers/firmware/efi/libstub/Makefile |   3 +-
 27 files changed, 621 insertions(+), 78 deletions(-)
 create mode 100644 arch/arm/include/asm/kasan.h
 create mode 100644 arch/arm/include/asm/kasan_def.h
 create mode 100644 arch/arm/mm/kasan_init.c
Signature · 1 line
2.17.1
#1 lore raw

PATCH v7 1/7 ARM: Moved CP15 definitions from kvm_hyp.h to cp15.h

We are going to add specific accessor functions for TTBR which are 32-bit/64-bit appropriate, move all CP15 register definitions into cp15.h where they belong.

---
 arch/arm/include/asm/cp15.h    | 57 ++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/kvm_hyp.h | 54 --------------------------------
 2 files changed, 57 insertions(+), 54 deletions(-)
arch/arm/include/asm/cp15.h +57 -0
index d2453e2d3f1f..89b6663f2863 100644
@@ -70,6 +70,63 @@
 
 #define CNTVCT				__ACCESS_CP15_64(1, c14)
 
+#define TTBR0_32	__ACCESS_CP15(c2, 0, c0, 0)
+#define TTBR1_32	__ACCESS_CP15(c2, 0, c0, 1)
+#define PAR_32		__ACCESS_CP15(c7, 0, c4, 0)
+#define TTBR0_64	__ACCESS_CP15_64(0, c2)
+#define TTBR1_64	__ACCESS_CP15_64(1, c2)
+#define PAR_64		__ACCESS_CP15_64(0, c7)
+#define VTTBR		__ACCESS_CP15_64(6, c2)
+#define CNTP_CVAL      __ACCESS_CP15_64(2, c14)
+#define CNTV_CVAL	__ACCESS_CP15_64(3, c14)
+#define CNTVOFF		__ACCESS_CP15_64(4, c14)
+
+#define MIDR		__ACCESS_CP15(c0, 0, c0, 0)
+#define CSSELR		__ACCESS_CP15(c0, 2, c0, 0)
+#define VPIDR		__ACCESS_CP15(c0, 4, c0, 0)
+#define VMPIDR		__ACCESS_CP15(c0, 4, c0, 5)
+#define SCTLR		__ACCESS_CP15(c1, 0, c0, 0)
+#define CPACR		__ACCESS_CP15(c1, 0, c0, 2)
+#define HCR		__ACCESS_CP15(c1, 4, c1, 0)
+#define HDCR		__ACCESS_CP15(c1, 4, c1, 1)
+#define HCPTR		__ACCESS_CP15(c1, 4, c1, 2)
+#define HSTR		__ACCESS_CP15(c1, 4, c1, 3)
+#define TTBCR		__ACCESS_CP15(c2, 0, c0, 2)
+#define HTCR		__ACCESS_CP15(c2, 4, c0, 2)
+#define VTCR		__ACCESS_CP15(c2, 4, c1, 2)
+#define DACR		__ACCESS_CP15(c3, 0, c0, 0)
+#define DFSR		__ACCESS_CP15(c5, 0, c0, 0)
+#define IFSR		__ACCESS_CP15(c5, 0, c0, 1)
+#define ADFSR		__ACCESS_CP15(c5, 0, c1, 0)
+#define AIFSR		__ACCESS_CP15(c5, 0, c1, 1)
+#define HSR		__ACCESS_CP15(c5, 4, c2, 0)
+#define DFAR		__ACCESS_CP15(c6, 0, c0, 0)
+#define IFAR		__ACCESS_CP15(c6, 0, c0, 2)
+#define HDFAR		__ACCESS_CP15(c6, 4, c0, 0)
+#define HIFAR		__ACCESS_CP15(c6, 4, c0, 2)
+#define HPFAR		__ACCESS_CP15(c6, 4, c0, 4)
+#define ICIALLUIS	__ACCESS_CP15(c7, 0, c1, 0)
+#define BPIALLIS	__ACCESS_CP15(c7, 0, c1, 6)
+#define ICIMVAU		__ACCESS_CP15(c7, 0, c5, 1)
+#define ATS1CPR		__ACCESS_CP15(c7, 0, c8, 0)
+#define TLBIALLIS	__ACCESS_CP15(c8, 0, c3, 0)
+#define TLBIALL		__ACCESS_CP15(c8, 0, c7, 0)
+#define TLBIALLNSNHIS	__ACCESS_CP15(c8, 4, c3, 4)
+#define PRRR		__ACCESS_CP15(c10, 0, c2, 0)
+#define NMRR		__ACCESS_CP15(c10, 0, c2, 1)
+#define AMAIR0		__ACCESS_CP15(c10, 0, c3, 0)
+#define AMAIR1		__ACCESS_CP15(c10, 0, c3, 1)
+#define VBAR		__ACCESS_CP15(c12, 0, c0, 0)
+#define CID		__ACCESS_CP15(c13, 0, c0, 1)
+#define TID_URW		__ACCESS_CP15(c13, 0, c0, 2)
+#define TID_URO		__ACCESS_CP15(c13, 0, c0, 3)
+#define TID_PRIV	__ACCESS_CP15(c13, 0, c0, 4)
+#define HTPIDR		__ACCESS_CP15(c13, 4, c0, 2)
+#define CNTKCTL		__ACCESS_CP15(c14, 0, c1, 0)
+#define CNTP_CTL	__ACCESS_CP15(c14, 0, c2, 1)
+#define CNTV_CTL	__ACCESS_CP15(c14, 0, c3, 1)
+#define CNTHCTL		__ACCESS_CP15(c14, 4, c1, 0)
+
 extern unsigned long cr_alignment;	/* defined in entry-armv.S */
 
 static inline unsigned long get_cr(void)
arch/arm/include/asm/kvm_hyp.h +0 -54

60 lines not on this page · raw message

Signature · 1 line
2.17.1
#2 lore raw

PATCH v7 2/7 ARM: Add TTBR operator for kasan_init

In reply to Florian Fainelli

From: Abbott Liu <[email protected]>

The purpose of this patch is to provide set_ttbr0/get_ttbr0 to kasan_init function. This makes use of the CP15 definitions added in the previous patch.

---
 arch/arm/include/asm/cp15.h | 50 +++++++++++++++++++++++++++++++++++++
 arch/arm/kvm/hyp/cp15-sr.c  | 12 ++++-----
 arch/arm/kvm/hyp/switch.c   |  6 ++---
 3 files changed, 59 insertions(+), 9 deletions(-)
arch/arm/include/asm/cp15.h +50 -0
index 89b6663f2863..0bd8287b39fa 100644
@@ -42,6 +42,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/stringify.h>
+
 #if __LINUX_ARM_ARCH__ >= 4
 #define vectors_high()	(get_cr() & CR_V)
 #else
@@ -129,6 +131,54 @@
 
 extern unsigned long cr_alignment;	/* defined in entry-armv.S */
 
+static inline void set_par(u64 val)
+{
+	if (IS_ENABLED(CONFIG_ARM_LPAE))
+		write_sysreg(val, PAR_64);
+	else
+		write_sysreg(val, PAR_32);
+}
+
+static inline u64 get_par(void)
+{
+	if (IS_ENABLED(CONFIG_ARM_LPAE))
+		return read_sysreg(PAR_64);
+	else
+		return read_sysreg(PAR_32);
+}
+
+static inline void set_ttbr0(u64 val)
+{
+	if (IS_ENABLED(CONFIG_ARM_LPAE))
+		write_sysreg(val, TTBR0_64);
+	else
+		write_sysreg(val, TTBR0_32);
+}
+
+static inline u64 get_ttbr0(void)
+{
+	if (IS_ENABLED(CONFIG_ARM_LPAE))
+		return read_sysreg(TTBR0_64);
+	else
+		return read_sysreg(TTBR0_32);
+}
+
+static inline void set_ttbr1(u64 val)
+{
+	if (IS_ENABLED(CONFIG_ARM_LPAE))
+		write_sysreg(val, TTBR1_64);
+	else
+		write_sysreg(val, TTBR1_32);
+}
+
+static inline u64 get_ttbr1(void)
+{
+	if (IS_ENABLED(CONFIG_ARM_LPAE))
+		return read_sysreg(TTBR1_64);
+	else
+		return read_sysreg(TTBR1_32);
+}
+
 static inline unsigned long get_cr(void)
 {
 	unsigned long val;
arch/arm/kvm/hyp/cp15-sr.c +6 -6
index e6923306f698..b2b9bb0a08b8 100644
@@ -19,8 +19,8 @@ void __hyp_text __sysreg_save_state(struct kvm_cpu_context *ctxt)
 	ctxt->cp15[c0_CSSELR]		= read_sysreg(CSSELR);
 	ctxt->cp15[c1_SCTLR]		= read_sysreg(SCTLR);
 	ctxt->cp15[c1_CPACR]		= read_sysreg(CPACR);
-	*cp15_64(ctxt, c2_TTBR0)	= read_sysreg(TTBR0);
-	*cp15_64(ctxt, c2_TTBR1)	= read_sysreg(TTBR1);
+	*cp15_64(ctxt, c2_TTBR0)	= read_sysreg(TTBR0_64);
+	*cp15_64(ctxt, c2_TTBR1)	= read_sysreg(TTBR1_64);
 	ctxt->cp15[c2_TTBCR]		= read_sysreg(TTBCR);
 	ctxt->cp15[c3_DACR]		= read_sysreg(DACR);
 	ctxt->cp15[c5_DFSR]		= read_sysreg(DFSR);
@@ -29,7 +29,7 @@ void __hyp_text __sysreg_save_state(struct kvm_cpu_context *ctxt)
 	ctxt->cp15[c5_AIFSR]		= read_sysreg(AIFSR);
 	ctxt->cp15[c6_DFAR]		= read_sysreg(DFAR);
 	ctxt->cp15[c6_IFAR]		= read_sysreg(IFAR);
-	*cp15_64(ctxt, c7_PAR)		= read_sysreg(PAR);
+	*cp15_64(ctxt, c7_PAR)		= read_sysreg(PAR_64);
 	ctxt->cp15[c10_PRRR]		= read_sysreg(PRRR);
 	ctxt->cp15[c10_NMRR]		= read_sysreg(NMRR);
 	ctxt->cp15[c10_AMAIR0]		= read_sysreg(AMAIR0);
@@ -48,8 +48,8 @@ void __hyp_text __sysreg_restore_state(struct kvm_cpu_context *ctxt)
 	write_sysreg(ctxt->cp15[c0_CSSELR],	CSSELR);
 	write_sysreg(ctxt->cp15[c1_SCTLR],	SCTLR);
 	write_sysreg(ctxt->cp15[c1_CPACR],	CPACR);
-	write_sysreg(*cp15_64(ctxt, c2_TTBR0),	TTBR0);
-	write_sysreg(*cp15_64(ctxt, c2_TTBR1),	TTBR1);
+	write_sysreg(*cp15_64(ctxt, c2_TTBR0),	TTBR0_64);
+	write_sysreg(*cp15_64(ctxt, c2_TTBR1),	TTBR1_64);
 	write_sysreg(ctxt->cp15[c2_TTBCR],	TTBCR);
 	write_sysreg(ctxt->cp15[c3_DACR],	DACR);
 	write_sysreg(ctxt->cp15[c5_DFSR],	DFSR);
@@ -58,7 +58,7 @@ void __hyp_text __sysreg_restore_state(struct kvm_cpu_context *ctxt)
 	write_sysreg(ctxt->cp15[c5_AIFSR],	AIFSR);
 	write_sysreg(ctxt->cp15[c6_DFAR],	DFAR);
 	write_sysreg(ctxt->cp15[c6_IFAR],	IFAR);
-	write_sysreg(*cp15_64(ctxt, c7_PAR),	PAR);
+	write_sysreg(*cp15_64(ctxt, c7_PAR),	PAR_64);
 	write_sysreg(ctxt->cp15[c10_PRRR],	PRRR);
 	write_sysreg(ctxt->cp15[c10_NMRR],	NMRR);
 	write_sysreg(ctxt->cp15[c10_AMAIR0],	AMAIR0);
arch/arm/kvm/hyp/switch.c +3 -3
index 1efeef3fd0ee..581277ef44d3 100644
@@ -123,12 +123,12 @@ static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu)
 	if (!(hsr & HSR_DABT_S1PTW) && (hsr & HSR_FSC_TYPE) == FSC_PERM) {
 		u64 par, tmp;
 
-		par = read_sysreg(PAR);
+		par = read_sysreg(PAR_64);
 		write_sysreg(far, ATS1CPR);
 		isb();
 
-		tmp = read_sysreg(PAR);
-		write_sysreg(par, PAR);
+		tmp = read_sysreg(PAR_64);
+		write_sysreg(par, PAR_64);
 
 		if (unlikely(tmp & 1))
 			return false; /* Translation failed, back to guest */
Signature · 1 line
2.17.1
#3 lore raw

PATCH v7 3/7 ARM: Disable instrumentation for some code

In reply to Florian Fainelli

From: Andrey Ryabinin <[email protected]>

Disable instrumentation for arch/arm/boot/compressed/* and arch/arm/vdso/* because that code would not linkd with kernel image.

Disable instrumentation for arch/arm/kvm/hyp/*. See commit a6cdf1c08cbf ("kvm: arm64: Disable compiler instrumentation for hypervisor code") for more details.

Disable instrumentation for arch/arm/mm/physaddr.c. See commit ec6d06efb0ba ("arm64: Add support for CONFIG_DEBUG_VIRTUAL") for more details.

Disable kasan check in the function unwind_pop_register because it does not matter that kasan checks failed when unwind_pop_register read stack memory of task.

---
 arch/arm/boot/compressed/Makefile | 1 +
 arch/arm/kernel/unwind.c          | 6 +++++-
 arch/arm/mm/Makefile              | 1 +
 arch/arm/vdso/Makefile            | 2 ++
 4 files changed, 9 insertions(+), 1 deletion(-)
arch/arm/boot/compressed/Makefile +1 -0
index a1e883c5e5c4..83991a0447fa 100644
@@ -24,6 +24,7 @@ OBJS		+= hyp-stub.o
 endif
 
 GCOV_PROFILE		:= n
+KASAN_SANITIZE		:= n
 
 # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
 KCOV_INSTRUMENT		:= n
arch/arm/kernel/unwind.c +5 -1
index 4574e6aea0a5..f73601416f90 100644
@@ -236,7 +236,11 @@ static int unwind_pop_register(struct unwind_ctrl_block *ctrl,
 		if (*vsp >= (unsigned long *)ctrl->sp_high)
 			return -URC_FAILURE;
 
-	ctrl->vrs[reg] = *(*vsp)++;
+	/* Use READ_ONCE_NOCHECK here to avoid this memory access
+	 * from being tracked by KASAN.
+	 */
+	ctrl->vrs[reg] = READ_ONCE_NOCHECK(*(*vsp));
+	(*vsp)++;
 	return URC_OK;
 }
 
arch/arm/mm/Makefile +1 -0
index 7cb1699fbfc4..432302911d6e 100644
@@ -16,6 +16,7 @@ endif
 obj-$(CONFIG_ARM_PTDUMP_CORE)	+= dump.o
 obj-$(CONFIG_ARM_PTDUMP_DEBUGFS)	+= ptdump_debugfs.o
 obj-$(CONFIG_MODULES)		+= proc-syms.o
+KASAN_SANITIZE_physaddr.o	:= n
 obj-$(CONFIG_DEBUG_VIRTUAL)	+= physaddr.o
 
 obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o
arch/arm/vdso/Makefile +2 -0
index 0fda344beb0b..1f76a5ff6e49 100644
@@ -42,6 +42,8 @@ GCOV_PROFILE := n
 # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
 KCOV_INSTRUMENT := n
 
+KASAN_SANITIZE := n
+
 # Force dependency
 $(obj)/vdso.o : $(obj)/vdso.so
 
Signature · 1 line
2.17.1
#4 lore raw

PATCH v7 4/7 ARM: Replace memory function for kasan

In reply to Florian Fainelli

From: Andrey Ryabinin <[email protected]>

Functions like memset/memmove/memcpy do a lot of memory accesses. If a bad pointer pis assed to one of these function it is important to catch this. Compiler instrumentation cannot do this since these functions are written in assembly.

KASan replaces memory functions with manually instrumented variants. Original functions declared as weak symbols so strong definitions in mm/kasan/kasan.c could replace them. Original functions have aliases with '__' prefix in name, so we could call non-instrumented variant if needed.

We must use __memcpy/__memset to replace memcpy/memset when we copy .data to RAM and when we clear .bss, because kasan_early_init cannot be called before the initialization of .data and .bss.

---
 arch/arm/include/asm/string.h | 17 +++++++++++++++++
 arch/arm/kernel/head-common.S |  4 ++--
 arch/arm/lib/memcpy.S         |  3 +++
 arch/arm/lib/memmove.S        |  5 ++++-
 arch/arm/lib/memset.S         |  3 +++
 5 files changed, 29 insertions(+), 3 deletions(-)
arch/arm/include/asm/string.h +17 -0
index 111a1d8a41dd..1f9016bbf153 100644
@@ -15,15 +15,18 @@ extern char * strchr(const char * s, int c);
 
 #define __HAVE_ARCH_MEMCPY
 extern void * memcpy(void *, const void *, __kernel_size_t);
+extern void *__memcpy(void *dest, const void *src, __kernel_size_t n);
 
 #define __HAVE_ARCH_MEMMOVE
 extern void * memmove(void *, const void *, __kernel_size_t);
+extern void *__memmove(void *dest, const void *src, __kernel_size_t n);
 
 #define __HAVE_ARCH_MEMCHR
 extern void * memchr(const void *, int, __kernel_size_t);
 
 #define __HAVE_ARCH_MEMSET
 extern void * memset(void *, int, __kernel_size_t);
+extern void *__memset(void *s, int c, __kernel_size_t n);
 
 #define __HAVE_ARCH_MEMSET32
 extern void *__memset32(uint32_t *, uint32_t v, __kernel_size_t);
@@ -39,4 +42,18 @@ static inline void *memset64(uint64_t *p, uint64_t v, __kernel_size_t n)
 	return __memset64(p, v, n * 8, v >> 32);
 }
 
+
+
+#if defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__)
+
+/*
+ * For files that not instrumented (e.g. mm/slub.c) we
+ * should use not instrumented version of mem* functions.
+ */
+
+#define memcpy(dst, src, len) __memcpy(dst, src, len)
+#define memmove(dst, src, len) __memmove(dst, src, len)
+#define memset(s, c, n) __memset(s, c, n)
+#endif
+
 #endif
arch/arm/kernel/head-common.S +2 -2
index 4a3982812a40..6840c7c60a85 100644
@@ -95,7 +95,7 @@ __mmap_switched:
  THUMB(	ldmia	r4!, {r0, r1, r2, r3} )
  THUMB(	mov	sp, r3 )
 	sub	r2, r2, r1
-	bl	memcpy				@ copy .data to RAM
+	bl	__memcpy			@ copy .data to RAM
 #endif
 
    ARM(	ldmia	r4!, {r0, r1, sp} )
@@ -103,7 +103,7 @@ __mmap_switched:
  THUMB(	mov	sp, r3 )
 	sub	r2, r1, r0
 	mov	r1, #0
-	bl	memset				@ clear .bss
+	bl	__memset			@ clear .bss
 
 	ldmia	r4, {r0, r1, r2, r3}
 	str	r9, [r0]			@ Save processor ID
arch/arm/lib/memcpy.S +3 -0
index 09a333153dc6..ad4625d16e11 100644
@@ -58,6 +58,8 @@
 
 /* Prototype: void *memcpy(void *dest, const void *src, size_t n); */
 
+.weak memcpy
+ENTRY(__memcpy)
 ENTRY(mmiocpy)
 ENTRY(memcpy)
 
@@ -65,3 +67,4 @@ ENTRY(memcpy)
 
 ENDPROC(memcpy)
 ENDPROC(mmiocpy)
+ENDPROC(__memcpy)
arch/arm/lib/memmove.S +4 -1
index b50e5770fb44..fd123ea5a5a4 100644
@@ -24,12 +24,14 @@
  * occurring in the opposite direction.
  */
 
+.weak memmove
+ENTRY(__memmove)
 ENTRY(memmove)
 	UNWIND(	.fnstart			)
 
 		subs	ip, r0, r1
 		cmphi	r2, ip
-		bls	memcpy
+		bls	__memcpy
 
 		stmfd	sp!, {r0, r4, lr}
 	UNWIND(	.fnend				)
@@ -222,3 +224,4 @@ ENTRY(memmove)
 18:		backward_copy_shift	push=24	pull=8
 
 ENDPROC(memmove)
+ENDPROC(__memmove)
arch/arm/lib/memset.S +3 -0
index 6ca4535c47fb..0e7ff0423f50 100644
@@ -13,6 +13,8 @@
 	.text
 	.align	5
 
+.weak memset
+ENTRY(__memset)
 ENTRY(mmioset)
 ENTRY(memset)
 UNWIND( .fnstart         )
@@ -132,6 +134,7 @@ UNWIND( .fnstart            )
 UNWIND( .fnend   )
 ENDPROC(memset)
 ENDPROC(mmioset)
+ENDPROC(__memset)
 
 ENTRY(__memset32)
 UNWIND( .fnstart         )
Signature · 1 line
2.17.1
#5 lore raw

PATCH v7 5/7 ARM: Define the virtual space of KASan's shadow region

In reply to Florian Fainelli

From: Abbott Liu <[email protected]>

Define KASAN_SHADOW_OFFSET,KASAN_SHADOW_START and KASAN_SHADOW_END for arm kernel address sanitizer.

     +----+ 0xffffffff
     |    |
     |    |
     |    |
     +----+ CONFIG_PAGE_OFFSET
     |    |     |    | |->  module virtual address space area.
     |    |/
     +----+ MODULE_VADDR = KASAN_SHADOW_END
     |    |     |    | |-> the shadow area of kernel virtual address.
     |    |/
     +----+ TASK_SIZE(start of kernel space) = KASAN_SHADOW_START  the
     |    |\  shadow address of MODULE_VADDR
     |    | ---------------------+
     |    |                      |
     +    + KASAN_SHADOW_OFFSET  |-> the user space area. Kernel address
     |    |                      |    sanitizer do not use this space.
     |    | ---------------------+
     |    |/
     ------ 0

1)KASAN_SHADOW_OFFSET:
This value is used to map an address to the corresponding shadow address by the following formula:

	shadow_addr = (address >> 3) + KASAN_SHADOW_OFFSET;

2)KASAN_SHADOW_START
This value is the MODULE_VADDR's shadow address. It is the start of kernel virtual space.

3)KASAN_SHADOW_END
This value is the 0x100000000's shadow address. It is the end of kernel address sanitizer shadow area. It is also the start of the module area.

When kasan is enabled, the definition of TASK_SIZE is not an 8-bit rotated constant, so we need to modify the TASK_SIZE access code in the *.s file.

---
 arch/arm/include/asm/kasan_def.h | 63 ++++++++++++++++++++++++++++++++
 arch/arm/include/asm/memory.h    |  5 +++
 arch/arm/kernel/entry-armv.S     |  5 ++-
 arch/arm/kernel/entry-common.S   |  9 +++--
 arch/arm/mm/mmu.c                |  7 +++-
 5 files changed, 83 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/include/asm/kasan_def.h
arch/arm/include/asm/kasan_def.h new file +63 -0
new file mode 100644
index 000000000000..4f0aa9869f54
@@ -0,0 +1,63 @@
+/*
+ *  arch/arm/include/asm/kasan_def.h
+ *
+ *  Copyright (c) 2018 Huawei Technologies Co., Ltd.
+ *
+ *  Author: Abbott Liu <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_KASAN_DEF_H
+#define __ASM_KASAN_DEF_H
+
+#ifdef CONFIG_KASAN
+
+/*
+ *    +----+ 0xffffffff
+ *    |    |
+ *    |    |
+ *    |    |
+ *    +----+ CONFIG_PAGE_OFFSET
+ *    |    |\
+ *    |    | |->  module virtual address space area.
+ *    |    |/
+ *    +----+ MODULE_VADDR = KASAN_SHADOW_END
+ *    |    |\
+ *    |    | |-> the shadow area of kernel virtual address.
+ *    |    |/
+ *    +----+ TASK_SIZE(start of kernel space) = KASAN_SHADOW_START  the
+ *    |    |\  shadow address of MODULE_VADDR
+ *    |    | ---------------------+
+ *    |    |                      |
+ *    +    + KASAN_SHADOW_OFFSET  |-> the user space area. Kernel address
+ *    |    |                      |    sanitizer do not use this space.
+ *    |    | ---------------------+
+ *    |    |/
+ *    ------ 0
+ *
+ *1) KASAN_SHADOW_OFFSET:
+ * This value is used to map an address to the corresponding shadow address by
+ * the following formula: shadow_addr = (address >> KASAN_SHADOW_SCALE_SHIFT) +
+ * KASAN_SHADOW_OFFSET;
+ *
+ * 2) KASAN_SHADOW_START:
+ * This value is the MODULE_VADDR's shadow address. It is the start of kernel
+ * virtual space.
+ *
+ * 3) KASAN_SHADOW_END
+ * This value is the 0x100000000's shadow address. It is the end of kernel
+ * addresssanitizer's shadow area. It is also the start of the module area.
+ *
+ */
+
+#define KASAN_SHADOW_SCALE_SHIFT	3
+#define KASAN_SHADOW_OFFSET	_AC(CONFIG_KASAN_SHADOW_OFFSET, UL)
+#define KASAN_SHADOW_END	((UL(1) << (32 - KASAN_SHADOW_SCALE_SHIFT)) \
+				 + KASAN_SHADOW_OFFSET)
+#define KASAN_SHADOW_START      ((KASAN_SHADOW_END >> 3) + KASAN_SHADOW_OFFSET)
+
+#endif
+#endif
arch/arm/include/asm/memory.h +5 -0
index 99035b5891ef..5cfa9e5dc733 100644
@@ -18,6 +18,7 @@
 #ifdef CONFIG_NEED_MACH_MEMORY_H
 #include <mach/memory.h>
 #endif
+#include <asm/kasan_def.h>
 
 /* PAGE_OFFSET - the virtual address of the start of the kernel image */
 #define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
@@ -28,7 +29,11 @@
  * TASK_SIZE - the maximum size of a user space task.
  * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
  */
+#ifndef CONFIG_KASAN
 #define TASK_SIZE		(UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M))
+#else
+#define TASK_SIZE		(KASAN_SHADOW_START)
+#endif
 #define TASK_UNMAPPED_BASE	ALIGN(TASK_SIZE / 3, SZ_16M)
 
 /*
arch/arm/kernel/entry-armv.S +3 -2
index 858d4e541532..8cf1cc30fa7f 100644
@@ -180,7 +180,7 @@ ENDPROC(__und_invalid)
 
 	get_thread_info tsk
 	ldr	r0, [tsk, #TI_ADDR_LIMIT]
-	mov	r1, #TASK_SIZE
+	ldr	r1, =TASK_SIZE
 	str	r1, [tsk, #TI_ADDR_LIMIT]
 	str	r0, [sp, #SVC_ADDR_LIMIT]
 
@@ -434,7 +434,8 @@ ENDPROC(__fiq_abt)
 	@ if it was interrupted in a critical region.  Here we
 	@ perform a quick test inline since it should be false
 	@ 99.9999% of the time.  The rest is done out of line.
-	cmp	r4, #TASK_SIZE
+	ldr	r0, =TASK_SIZE
+	cmp	r4, r0
 	blhs	kuser_cmpxchg64_fixup
 #endif
 #endif
arch/arm/kernel/entry-common.S +6 -3
index 271cb8a1eba1..fee279e28a72 100644
@@ -50,7 +50,8 @@ __ret_fast_syscall:
  UNWIND(.cantunwind	)
 	disable_irq_notrace			@ disable interrupts
 	ldr	r2, [tsk, #TI_ADDR_LIMIT]
-	cmp	r2, #TASK_SIZE
+	ldr	r1, =TASK_SIZE
+	cmp	r2, r1
 	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]		@ re-check for syscall tracing
 	tst	r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
@@ -87,7 +88,8 @@ __ret_fast_syscall:
 #endif
 	disable_irq_notrace			@ disable interrupts
 	ldr	r2, [tsk, #TI_ADDR_LIMIT]
-	cmp	r2, #TASK_SIZE
+	ldr     r1, =TASK_SIZE
+	cmp     r2, r1
 	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]		@ re-check for syscall tracing
 	tst	r1, #_TIF_SYSCALL_WORK | _TIF_WORK_MASK
@@ -128,7 +130,8 @@ ret_slow_syscall:
 	disable_irq_notrace			@ disable interrupts
 ENTRY(ret_to_user_from_irq)
 	ldr	r2, [tsk, #TI_ADDR_LIMIT]
-	cmp	r2, #TASK_SIZE
+	ldr     r1, =TASK_SIZE
+	cmp	r2, r1
 	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]
 	tst	r1, #_TIF_WORK_MASK
arch/arm/mm/mmu.c +6 -1
index 5d0d0f86e790..d05493ec7d7f 100644
@@ -1272,9 +1272,14 @@ static inline void prepare_page_table(void)
 	/*
 	 * Clear out all the mappings below the kernel image.
 	 */
-	for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE)
+	for (addr = 0; addr < TASK_SIZE; addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
+#ifdef CONFIG_KASAN
+	/*TASK_SIZE ~ MODULES_VADDR is the KASAN's shadow area -- skip over it*/
+	addr = MODULES_VADDR;
+#endif
+
 #ifdef CONFIG_XIP_KERNEL
 	/* The XIP kernel is mapped in the module area -- skip over it */
 	addr = ((unsigned long)_exiprom + PMD_SIZE - 1) & PMD_MASK;
Signature · 1 line
2.17.1
#6 lore raw

PATCH v7 6/7 ARM: Initialize the mapping of KASan shadow memory

In reply to Florian Fainelli

From: Andrey Ryabinin <[email protected]>

This patch initializes KASan shadow region's page table and memory. There are two stage for KASan initializing:

1. At early boot stage the whole shadow region is mapped to just one physical page (kasan_zero_page). It is finished by the function kasan_early_init which is called by __mmap_switched(arch/arm/kernel/ head-common.S)
---Andrey Ryabinin <[email protected]>

2. After the calling of paging_init, we use kasan_zero_page as zero shadow for some memory that KASan does not need to track, and we allocate a new shadow space for the other memory that KASan need to track. These issues are finished by the function kasan_init which is call by setup_arch.
---Andrey Ryabinin <[email protected]>

3. Add support ARM LPAE
If LPAE is enabled, KASan shadow region's mapping table need be copied in the pgd_alloc() function.
---Abbott Liu <[email protected]>

4. Change kasan_pte_populate,kasan_pmd_populate,kasan_pud_populate, kasan_pgd_populate from .meminit.text section to .init.text section. ---Reported by: Florian Fainelli <[email protected]> ---Signed off by: Abbott Liu <[email protected]>

---
 arch/arm/include/asm/kasan.h       |  35 ++++
 arch/arm/include/asm/pgalloc.h     |   9 +-
 arch/arm/include/asm/thread_info.h |   4 +
 arch/arm/kernel/head-common.S      |   3 +
 arch/arm/kernel/setup.c            |   2 +
 arch/arm/mm/Makefile               |   3 +
 arch/arm/mm/kasan_init.c           | 302 +++++++++++++++++++++++++++++
 arch/arm/mm/pgd.c                  |  14 ++
 8 files changed, 370 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/include/asm/kasan.h
 create mode 100644 arch/arm/mm/kasan_init.c
arch/arm/include/asm/kasan.h new file +35 -0
new file mode 100644
index 000000000000..1801f4d30993
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/include/asm/kasan.h
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Author: Andrey Ryabinin <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_KASAN_H
+#define __ASM_KASAN_H
+
+#ifdef CONFIG_KASAN
+
+#include <asm/kasan_def.h>
+
+#define KASAN_SHADOW_SCALE_SHIFT 3
+
+/*
+ * Compiler uses shadow offset assuming that addresses start
+ * from 0. Kernel addresses don't start from 0, so shadow
+ * for kernel really starts from 'compiler's shadow offset' +
+ * ('kernel address space start' >> KASAN_SHADOW_SCALE_SHIFT)
+ */
+
+extern void kasan_init(void);
+
+#else
+static inline void kasan_init(void) { }
+#endif
+
+#endif
arch/arm/include/asm/pgalloc.h +7 -2
index 069da393110c..d969f8058b26 100644
@@ -21,6 +21,7 @@
 #define _PAGE_KERNEL_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
 
 #ifdef CONFIG_ARM_LPAE
+#define PGD_SIZE		(PTRS_PER_PGD * sizeof(pgd_t))
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
 {
@@ -39,14 +40,18 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 }
 
 #else	/* !CONFIG_ARM_LPAE */
+#define PGD_SIZE		(PAGE_SIZE << 2)
 
 /*
  * Since we have only two-level page tables, these are trivial
  */
 #define pmd_alloc_one(mm,addr)		({ BUG(); ((pmd_t *)2); })
 #define pmd_free(mm, pmd)		do { } while (0)
-#define pud_populate(mm,pmd,pte)	BUG()
-
+#ifndef CONFIG_KASAN
+#define pud_populate(mm, pmd, pte)	BUG()
+#else
+#define pud_populate(mm, pmd, pte)	do { } while (0)
+#endif
 #endif	/* CONFIG_ARM_LPAE */
 
 extern pgd_t *pgd_alloc(struct mm_struct *mm);
arch/arm/include/asm/thread_info.h +4 -0
index 0d0d5178e2c3..2c940dcc953b 100644
@@ -13,7 +13,11 @@
 #include <asm/fpstate.h>
 #include <asm/page.h>
 
+#ifdef CONFIG_KASAN
+#define THREAD_SIZE_ORDER	2
+#else
 #define THREAD_SIZE_ORDER	1
+#endif
 #define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_START_SP		(THREAD_SIZE - 8)
 
arch/arm/kernel/head-common.S +3 -0
index 6840c7c60a85..89c80154b9ef 100644
@@ -111,6 +111,9 @@ __mmap_switched:
 	str	r8, [r2]			@ Save atags pointer
 	cmp	r3, #0
 	strne	r10, [r3]			@ Save control register values
+#ifdef CONFIG_KASAN
+	bl	kasan_early_init
+#endif
 	mov	lr, #0
 	b	start_kernel
 ENDPROC(__mmap_switched)
arch/arm/kernel/setup.c +2 -0
index d0a464e317ea..b120df6325dc 100644
@@ -58,6 +58,7 @@
 #include <asm/unwind.h>
 #include <asm/memblock.h>
 #include <asm/virt.h>
+#include <asm/kasan.h>
 
 #include "atags.h"
 
@@ -1130,6 +1131,7 @@ void __init setup_arch(char **cmdline_p)
 	early_ioremap_reset();
 
 	paging_init(mdesc);
+	kasan_init();
 	request_standard_resources(mdesc);
 
 	if (mdesc->restart)
arch/arm/mm/Makefile +3 -0
index 432302911d6e..1c937135c9c4 100644
@@ -112,3 +112,6 @@ obj-$(CONFIG_CACHE_L2X0_PMU)	+= cache-l2x0-pmu.o
 obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
 obj-$(CONFIG_CACHE_TAUROS2)	+= cache-tauros2.o
 obj-$(CONFIG_CACHE_UNIPHIER)	+= cache-uniphier.o
+
+KASAN_SANITIZE_kasan_init.o    := n
+obj-$(CONFIG_KASAN)            += kasan_init.o
arch/arm/mm/kasan_init.c new file +302 -0

302 lines not on this page · raw message

arch/arm/mm/pgd.c +14 -0
index 478bd2c6aa50..92a408262df2 100644
@@ -61,6 +61,20 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 	new_pmd = pmd_alloc(mm, new_pud, 0);
 	if (!new_pmd)
 		goto no_pmd;
+#ifdef CONFIG_KASAN
+	/*
+	 *Copy PMD table for KASAN shadow mappings.
+	 */
+	init_pgd = pgd_offset_k(TASK_SIZE);
+	init_pud = pud_offset(init_pgd, TASK_SIZE);
+	init_pmd = pmd_offset(init_pud, TASK_SIZE);
+	new_pmd = pmd_offset(new_pud, TASK_SIZE);
+	memcpy(new_pmd, init_pmd,
+		(pmd_index(MODULES_VADDR)-pmd_index(TASK_SIZE))
+		* sizeof(pmd_t));
+	clean_dcache_area(new_pmd, PTRS_PER_PMD*sizeof(pmd_t));
+#endif
+
 #endif
 
 	if (!vectors_high()) {
Signature · 1 line
2.17.1
#7 lore raw

PATCH v7 7/7 ARM: Enable KASan for ARM

In reply to Florian Fainelli

From: Andrey Ryabinin <[email protected]>

This patch enables the kernel address sanitizer for ARM. XIP_KERNEL has not been tested and is therefore not allowed.

---
 Documentation/dev-tools/kasan.rst     | 4 ++--
 arch/arm/Kconfig                      | 9 +++++++++
 arch/arm/boot/compressed/Makefile     | 1 +
 drivers/firmware/efi/libstub/Makefile | 3 ++-
 4 files changed, 14 insertions(+), 3 deletions(-)
Documentation/dev-tools/kasan.rst +2 -2
index e4d66e7c50de..6acd949989c3 100644
@@ -21,8 +21,8 @@ global variables yet.
 
 Tag-based KASAN is only supported in Clang and requires version 7.0.0 or later.
 
-Currently generic KASAN is supported for the x86_64, arm64, xtensa and s390
-architectures, and tag-based KASAN is supported only for arm64.
+Currently generic KASAN is supported for the x86_64, arm, arm64, xtensa and
+s390 architectures, and tag-based KASAN is supported only for arm64.
 
 Usage
 -----
arch/arm/Kconfig +9 -0
index 96dab76da3b3..70a7eb50984e 100644
@@ -65,6 +65,7 @@ config ARM
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
 	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT
 	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
@@ -212,6 +213,14 @@ config ARCH_MAY_HAVE_PC_FDC
 config ZONE_DMA
 	bool
 
+config KASAN_SHADOW_OFFSET
+	hex
+	depends on KASAN
+	default 0x1f000000 if PAGE_OFFSET=0x40000000
+	default 0x5f000000 if PAGE_OFFSET=0x80000000
+	default 0x9f000000 if PAGE_OFFSET=0xC0000000
+	default 0xffffffff
+
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
arch/arm/boot/compressed/Makefile +1 -0
index 83991a0447fa..efda24b00a44 100644
@@ -25,6 +25,7 @@ endif
 
 GCOV_PROFILE		:= n
 KASAN_SANITIZE		:= n
+CFLAGS_KERNEL		+= -D__SANITIZE_ADDRESS__
 
 # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
 KCOV_INSTRUMENT		:= n
drivers/firmware/efi/libstub/Makefile +2 -1
index c35f893897e1..c8b36824189b 100644
@@ -20,7 +20,8 @@ cflags-$(CONFIG_ARM64)		:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
 				   -fpie $(DISABLE_STACKLEAK_PLUGIN)
 cflags-$(CONFIG_ARM)		:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
 				   -fno-builtin -fpic \
-				   $(call cc-option,-mno-single-pic-base)
+				   $(call cc-option,-mno-single-pic-base) \
+				   -D__SANITIZE_ADDRESS__
 
 cflags-$(CONFIG_EFI_ARMSTUB)	+= -I$(srctree)/scripts/dtc/libfdt
 
Signature · 6 lines
2.17.1

_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
maintainer
#8 lore raw

Re: [PATCH v7 7/7] ARM: Enable KASan for ARM

Quoted 76 lines · Florian Fainelli

From: Andrey Ryabinin <[email protected]>

This patch enables the kernel address sanitizer for ARM. XIP_KERNEL has not been tested and is therefore not allowed.

---
 Documentation/dev-tools/kasan.rst     | 4 ++--
 arch/arm/Kconfig                      | 9 +++++++++
 arch/arm/boot/compressed/Makefile     | 1 +
 drivers/firmware/efi/libstub/Makefile | 3 ++-
 4 files changed, 14 insertions(+), 3 deletions(-)
Documentation/dev-tools/kasan.rst +2 -2
index e4d66e7c50de..6acd949989c3 100644
@@ -21,8 +21,8 @@ global variables yet.
 
 Tag-based KASAN is only supported in Clang and requires version 7.0.0 or later.
 
-Currently generic KASAN is supported for the x86_64, arm64, xtensa and s390
-architectures, and tag-based KASAN is supported only for arm64.
+Currently generic KASAN is supported for the x86_64, arm, arm64, xtensa and
+s390 architectures, and tag-based KASAN is supported only for arm64.
 
 Usage
 -----
arch/arm/Kconfig +9 -0
index 96dab76da3b3..70a7eb50984e 100644
@@ -65,6 +65,7 @@ config ARM
        select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
        select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
        select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
+       select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
        select HAVE_ARCH_MMAP_RND_BITS if MMU
        select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT
        select HAVE_ARCH_THREAD_STRUCT_WHITELIST
@@ -212,6 +213,14 @@ config ARCH_MAY_HAVE_PC_FDC
 config ZONE_DMA
        bool
 
+config KASAN_SHADOW_OFFSET
+       hex
+       depends on KASAN
+       default 0x1f000000 if PAGE_OFFSET=0x40000000
+       default 0x5f000000 if PAGE_OFFSET=0x80000000
+       default 0x9f000000 if PAGE_OFFSET=0xC0000000
+       default 0xffffffff
+
 config ARCH_SUPPORTS_UPROBES
        def_bool y
 
arch/arm/boot/compressed/Makefile +1 -0
index 83991a0447fa..efda24b00a44 100644
@@ -25,6 +25,7 @@ endif
 
 GCOV_PROFILE           := n
 KASAN_SANITIZE         := n
+CFLAGS_KERNEL          += -D__SANITIZE_ADDRESS__
 
 # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
 KCOV_INSTRUMENT                := n
drivers/firmware/efi/libstub/Makefile +0 -0
index c35f893897e1..c8b36824189b 100644

drivers/firmware/efi/libstub/Makefile cflags-$(CONFIG_ARM64) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \ · line 25

Quoted 7 lines
drivers/firmware/efi/libstub/Makefile +2 -1
@@ -20,7 +20,8 @@ cflags-$(CONFIG_ARM64)                := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
                                   -fpie $(DISABLE_STACKLEAK_PLUGIN)
 cflags-$(CONFIG_ARM)           := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
                                   -fno-builtin -fpic \
-                                  $(call cc-option,-mno-single-pic-base)
+                                  $(call cc-option,-mno-single-pic-base) \
+                                  -D__SANITIZE_ADDRESS__
 

I am not too crazy about this need to unconditionally 'enable' KASAN on the command line like this, in order to be able to disable it again when CONFIG_KASAN=y.

Could we instead add something like this at the top of arch/arm/boot/compressed/string.c?

#ifdef CONFIG_KASAN
#undef memcpy
#undef memmove
#undef memset
void *__memcpy(void *__dest, __const void *__src, size_t __n) __alias(memcpy); void *__memmove(void *__dest, __const void *__src, size_t count) __alias(memmove);
void *__memset(void *s, int c, size_t count) __alias(memset); #endif

maintainer
#9 lore raw

Re: [PATCH v7 7/7] ARM: Enable KASan for ARM

(+ Linus)

Quoted 107 lines · Ard Biesheuvel
Quoted 76 lines · Florian Fainelli

From: Andrey Ryabinin <[email protected]>

This patch enables the kernel address sanitizer for ARM. XIP_KERNEL has not been tested and is therefore not allowed.

---
 Documentation/dev-tools/kasan.rst     | 4 ++--
 arch/arm/Kconfig                      | 9 +++++++++
 arch/arm/boot/compressed/Makefile     | 1 +
 drivers/firmware/efi/libstub/Makefile | 3 ++-
 4 files changed, 14 insertions(+), 3 deletions(-)
Documentation/dev-tools/kasan.rst +2 -2
index e4d66e7c50de..6acd949989c3 100644
@@ -21,8 +21,8 @@ global variables yet.
 
 Tag-based KASAN is only supported in Clang and requires version 7.0.0 or later.
 
-Currently generic KASAN is supported for the x86_64, arm64, xtensa and s390
-architectures, and tag-based KASAN is supported only for arm64.
+Currently generic KASAN is supported for the x86_64, arm, arm64, xtensa and
+s390 architectures, and tag-based KASAN is supported only for arm64.
 
 Usage
 -----
arch/arm/Kconfig +9 -0
index 96dab76da3b3..70a7eb50984e 100644
@@ -65,6 +65,7 @@ config ARM
        select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
        select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
        select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
+       select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
        select HAVE_ARCH_MMAP_RND_BITS if MMU
        select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT
        select HAVE_ARCH_THREAD_STRUCT_WHITELIST
@@ -212,6 +213,14 @@ config ARCH_MAY_HAVE_PC_FDC
 config ZONE_DMA
        bool
 
+config KASAN_SHADOW_OFFSET
+       hex
+       depends on KASAN
+       default 0x1f000000 if PAGE_OFFSET=0x40000000
+       default 0x5f000000 if PAGE_OFFSET=0x80000000
+       default 0x9f000000 if PAGE_OFFSET=0xC0000000
+       default 0xffffffff
+
 config ARCH_SUPPORTS_UPROBES
        def_bool y
 
arch/arm/boot/compressed/Makefile +1 -0
index 83991a0447fa..efda24b00a44 100644
@@ -25,6 +25,7 @@ endif
 
 GCOV_PROFILE           := n
 KASAN_SANITIZE         := n
+CFLAGS_KERNEL          += -D__SANITIZE_ADDRESS__
 
 # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
 KCOV_INSTRUMENT                := n
drivers/firmware/efi/libstub/Makefile +0 -0
index c35f893897e1..c8b36824189b 100644

drivers/firmware/efi/libstub/Makefile cflags-$(CONFIG_ARM64) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \ · line 25

Quoted 7 lines
drivers/firmware/efi/libstub/Makefile +2 -1
@@ -20,7 +20,8 @@ cflags-$(CONFIG_ARM64)                := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
                                   -fpie $(DISABLE_STACKLEAK_PLUGIN)
 cflags-$(CONFIG_ARM)           := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
                                   -fno-builtin -fpic \
-                                  $(call cc-option,-mno-single-pic-base)
+                                  $(call cc-option,-mno-single-pic-base) \
+                                  -D__SANITIZE_ADDRESS__
 

I am not too crazy about this need to unconditionally 'enable' KASAN on the command line like this, in order to be able to disable it again when CONFIG_KASAN=y.

Could we instead add something like this at the top of arch/arm/boot/compressed/string.c?

#ifdef CONFIG_KASAN
#undef memcpy
#undef memmove
#undef memset
void *__memcpy(void *__dest, __const void *__src, size_t __n) __alias(memcpy); void *__memmove(void *__dest, __const void *__src, size_t count) __alias(memmove);
void *__memset(void *s, int c, size_t count) __alias(memset); #endif

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#10 lore raw

Re: [PATCH v7 7/7] ARM: Enable KASan for ARM

In reply to Ard Biesheuvel
Quoted 1 line · Ard Biesheuvel
Quoted 1 line

+CFLAGS_KERNEL += -D__SANITIZE_ADDRESS__

(...)

Quoted 11 lines

drivers/firmware/efi/libstub/Makefile cflags-$(CONFIG_ARM64) := $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \ · line 24

Quoted 3 lines
drivers/firmware/efi/libstub/Makefile +2 -1
-                                  $(call cc-option,-mno-single-pic-base)
+                                  $(call cc-option,-mno-single-pic-base) \
+                                  -D__SANITIZE_ADDRESS__

I am not too crazy about this need to unconditionally 'enable' KASAN on the command line like this, in order to be able to disable it again when CONFIG_KASAN=y.

Could we instead add something like this at the top of arch/arm/boot/compressed/string.c?

Quoted 9 lines

#ifdef CONFIG_KASAN
#undef memcpy
#undef memmove
#undef memset
void *__memcpy(void *__dest, __const void *__src, size_t __n) __alias(memcpy); void *__memmove(void *__dest, __const void *__src, size_t count) __alias(memmove);
void *__memset(void *s, int c, size_t count) __alias(memset); #endif

I obviously missed this before I sent out my new version of the series. It bothers me too.

I will try this approach when I prepare the next iteration.

Thanks a lot!

Yours,
Linus Walleij