arm: dts: rockchip: Update EVB/Puma devices to upstream USB/dwc3 conventions
PATCH 1/1 arm: dts: rockchip: Update EVB/Puma devices to upstream USB/dwc3 conventions
The upstream linux kernel for the Rockchip 3399 SoC use usbdrd3 naming so move the two remaining devices over to that for their device trees to make it easier to sync with upstream DTs.
Signed-off-by Peter Robinson <[email protected]>
--- arch/arm/dts/rk3399-evb.dts | 4 ++-- arch/arm/dts/rk3399-puma.dtsi | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
arch/arm/dts/rk3399-evb.dts +2 -2
@@ -176,7 +176,7 @@ status = "okay"; }; -&dwc3_typec0 { +&usbdrd3_0 { vbus-supply = <&vcc5v0_typec0>; status = "okay"; };
@@ -189,7 +189,7 @@ status = "okay"; }; -&dwc3_typec1 { +&usbdrd3_1 { vbus-supply = <&vcc5v0_typec1>; status = "okay"; };
arch/arm/dts/rk3399-puma.dtsi +2 -2
@@ -518,7 +518,7 @@ status = "disabled"; }; -&dwc3_typec0 { +&usbdrd3_0 { status = "okay"; };
@@ -530,7 +530,7 @@ status = "disabled"; }; -&dwc3_typec1 { +&usbdrd3_1 { status = "okay"; tsd,usb-port-power = "usbhub_enable"; };
Signature · 1 line
2.24.1
PATCH 1/1 arm: dts: rockchip: Update EVB/Puma devices to upstream USB/dwc3 conventions
Quoted 5 lines · Peter Robinson
The upstream linux kernel for the Rockchip 3399 SoC use usbdrd3 naming so move the two remaining devices over to that for their device trees to make it easier to sync with upstream DTs.
Signed-off-by Peter Robinson <[email protected]>
Reviewed-by Kever Yang <[email protected]>
Thanks,
- Kever
Quoted 49 lines
--- arch/arm/dts/rk3399-evb.dts | 4 ++-- arch/arm/dts/rk3399-puma.dtsi | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)arch/arm/dts/rk3399-evb.dts +2
-2@@ -176,7 +176,7 @@ status = "okay"; }; -&dwc3_typec0 { +&usbdrd3_0 { vbus-supply = <&vcc5v0_typec0>; status = "okay"; };@@ -189,7 +189,7 @@ status = "okay"; }; -&dwc3_typec1 { +&usbdrd3_1 { vbus-supply = <&vcc5v0_typec1>; status = "okay"; };arch/arm/dts/rk3399-puma.dtsi +2
-2@@ -518,7 +518,7 @@ status = "disabled"; }; -&dwc3_typec0 { +&usbdrd3_0 { status = "okay"; };@@ -530,7 +530,7 @@ status = "disabled"; }; -&dwc3_typec1 { +&usbdrd3_1 { status = "okay"; tsd,usb-port-power = "usbhub_enable"; };