Skip to contentSkip to conversation

Add vTPM emulator support for ppc64 platform

PATCH Applied Stefan Berger 3 participants 9 messages Jan 21, 2020 – Jan 29, 2020

lore
Share & tools
lore
#0 lore raw

v9 cover Add vTPM emulator support for ppc64 platform

The following series of patches adds vTPM emulator support for the ppc64 platform (pSeries).

It can be tested as follows with swtpm/libtpms:

mkdir /tmp/mytpm1
swtpm socket --tpmstate dir=/tmp/mytpm1 \
--ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
--log level=20

If TPM 2 is desired, add --tpm2 as parameter to the above.

In another terminal start QEMU:

sudo ./ppc64-softmmu/qemu-system-ppc64 -display sdl \
	-machine pseries,accel=kvm \
	-m 1024 -bios slof.bin -boot menu=on \
	-nodefaults -device VGA -device pci-ohci -device usb-kbd \
	-chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
	-tpmdev emulator,id=tpm0,chardev=chrtpm \
	-device tpm-spapr,tpmdev=tpm0 \
	-device spapr-vscsi,id=scsi0,reg=0x00002000 \
	-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x3,drive=drive-virtio-disk0,id=virtio-disk0 \
	-drive file=test.img,format=raw,if=none,id=drive-virtio-disk0

Links:
- libtpms: https://github.com/stefanberger/libtpms/wiki
- swtpm: https://github.com/stefanberger/swtpm/wiki

Changes:
v8->v9:
- Allocating buffer now so we can use VMSTATE_VBUFFER_UINT32 for the regular buffer (no more suspend buffer)

v7->v8:
- Folded documentation patch into 3rd patch
- Added Marc-André's patch to end of series

v6->v7:
- Implemented get_dt_compatible() and using it
- Moved tpm_this_show_buffer to tpm_util.c

v5->v6:
- adjusted names of structures and simplified
- only transmitting min. necessary bytes to pass to VM after resume
- addressed other issues pointed out by D. Gibson

v4->v5:
- use runstate_check(RUN_STATE_FINISH_MIGRATE) to check whether devices are suspending; ditch 3 patches in this series that tried to do similar

v3->v4:
- addressed comments to v3
- reworked suspend/resume support that requires extensions to backends

v2->v3:
- patch 1: a TPM 2 is identified by IBM,vtpm20 in the compatible node
- patch 1: convert to tracing to display Tx and Rx buffers
- added documentation patch
- added patch to enable TPM device as part of pSeries

v1->v2:
- followed Cedric Le Goater's suggestions to patch 1
- send appropriate CRQ error responses if DMA read or write fails
- renamed tpm_spapr_got_payload to tpm_spapr_process_cmd and pass endianess-adjusted data pointer from CRQ to it

Regards,
Stefan

Marc-André Lureau (1):
docs/specs/tpm: reST-ify TPM documentation

Stefan Berger (5):
tpm: Move tpm_tis_show_buffer to tpm_util.c
spapr: Implement get_dt_compatible() callback
tpm_spapr: Support TPM for ppc64 using CRQ based interface
tpm_spapr: Support suspend and resume hw/ppc/Kconfig: Enable TPM_SPAPR as part of PSERIES config

 docs/specs/index.rst       |   1 +
 docs/specs/tpm.rst         | 503 +++++++++++++++++++++++++++++++++++++
 docs/specs/tpm.txt         | 427 -------------------------------
 hw/ppc/Kconfig             |   1 +
 hw/ppc/spapr_vio.c         |  11 +-
 hw/tpm/Kconfig             |   6 +
 hw/tpm/Makefile.objs       |   1 +
 hw/tpm/tpm_spapr.c         | 429 +++++++++++++++++++++++++++++++
 hw/tpm/tpm_tis.c           |  32 +--
 hw/tpm/tpm_util.c          |  25 ++
 hw/tpm/tpm_util.h          |   3 +
 hw/tpm/trace-events        |  16 +-
 include/hw/ppc/spapr_vio.h |   1 +
 include/sysemu/tpm.h       |   3 +
 qapi/tpm.json              |   6 +-
 15 files changed, 1004 insertions(+), 461 deletions(-)
 create mode 100644 docs/specs/tpm.rst
 delete mode 100644 docs/specs/tpm.txt
 create mode 100644 hw/tpm/tpm_spapr.c
Signature · 1 line
2.24.1
#1 lore raw

PATCH v9 1/6 tpm: Move tpm_tis_show_buffer to tpm_util.c

From: Stefan Berger <[email protected]>

---
 hw/tpm/tpm_tis.c    | 32 ++++----------------------------
 hw/tpm/tpm_util.c   | 25 +++++++++++++++++++++++++
 hw/tpm/tpm_util.h   |  3 +++
 hw/tpm/trace-events |  2 +-
 4 files changed, 33 insertions(+), 29 deletions(-)
hw/tpm/tpm_tis.c +4 -28
index 7aaf9b946d..5b17c88a7d 100644
@@ -107,30 +107,6 @@ static uint8_t tpm_tis_locality_from_addr(hwaddr addr)
     return (uint8_t)((addr >> TPM_TIS_LOCALITY_SHIFT) & 0x7);
 }
 
-static void tpm_tis_show_buffer(const unsigned char *buffer,
-                                size_t buffer_size, const char *string)
-{
-    size_t len, i;
-    char *line_buffer, *p;
-
-    len = MIN(tpm_cmd_get_size(buffer), buffer_size);
-
-    /*
-     * allocate enough room for 3 chars per buffer entry plus a
-     * newline after every 16 chars and a final null terminator.
-     */
-    line_buffer = g_malloc(len * 3 + (len / 16) + 1);
-
-    for (i = 0, p = line_buffer; i < len; i++) {
-        if (i && !(i % 16)) {
-            p += sprintf(p, "\n");
-        }
-        p += sprintf(p, "%.2X ", buffer[i]);
-    }
-    trace_tpm_tis_show_buffer(string, len, line_buffer);
-
-    g_free(line_buffer);
-}
 
 /*
  * Set the given flags in the STS register by clearing the register but
@@ -156,8 +132,8 @@ static void tpm_tis_sts_set(TPMLocality *l, uint32_t flags)
  */
 static void tpm_tis_tpm_send(TPMState *s, uint8_t locty)
 {
-    if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) {
-        tpm_tis_show_buffer(s->buffer, s->be_buffer_size, "To TPM");
+    if (trace_event_get_state_backends(TRACE_TPM_UTIL_SHOW_BUFFER)) {
+        tpm_util_show_buffer(s->buffer, s->be_buffer_size, "To TPM");
     }
 
     /*
@@ -325,8 +301,8 @@ static void tpm_tis_request_completed(TPMIf *ti, int ret)
     s->loc[locty].state = TPM_TIS_STATE_COMPLETION;
     s->rw_offset = 0;
 
-    if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) {
-        tpm_tis_show_buffer(s->buffer, s->be_buffer_size, "From TPM");
+    if (trace_event_get_state_backends(TRACE_TPM_UTIL_SHOW_BUFFER)) {
+        tpm_util_show_buffer(s->buffer, s->be_buffer_size, "From TPM");
     }
 
     if (TPM_TIS_IS_VALID_LOCTY(s->next_locty)) {
hw/tpm/tpm_util.c +25 -0
index 62b091f0c0..c0a0f3d71f 100644
@@ -350,3 +350,28 @@ void tpm_sized_buffer_reset(TPMSizedBuffer *tsb)
     tsb->buffer = NULL;
     tsb->size = 0;
 }
+
+void tpm_util_show_buffer(const unsigned char *buffer,
+                          size_t buffer_size, const char *string)
+{
+    size_t len, i;
+    char *line_buffer, *p;
+
+    len = MIN(tpm_cmd_get_size(buffer), buffer_size);
+
+    /*
+     * allocate enough room for 3 chars per buffer entry plus a
+     * newline after every 16 chars and a final null terminator.
+     */
+    line_buffer = g_malloc(len * 3 + (len / 16) + 1);
+
+    for (i = 0, p = line_buffer; i < len; i++) {
+        if (i && !(i % 16)) {
+            p += sprintf(p, "\n");
+        }
+        p += sprintf(p, "%.2X ", buffer[i]);
+    }
+    trace_tpm_util_show_buffer(string, len, line_buffer);
+
+    g_free(line_buffer);
+}
hw/tpm/tpm_util.h +3 -0
index f397ac21b8..7889081fba 100644
@@ -79,4 +79,7 @@ typedef struct TPMSizedBuffer {
 
 void tpm_sized_buffer_reset(TPMSizedBuffer *tsb);
 
+void tpm_util_show_buffer(const unsigned char *buffer,
+                          size_t buffer_size, const char *string);
+
 #endif /* TPM_TPM_UTIL_H */
hw/tpm/trace-events +1 -1
index 89804bcd64..357c9e9a84 100644
@@ -14,6 +14,7 @@ tpm_util_get_buffer_size_len(uint32_t len, size_t expected) "tpm_resp->len = %u,
 tpm_util_get_buffer_size_hdr_len2(uint32_t len, size_t expected) "tpm2_resp->hdr.len = %u, expected = %zu"
 tpm_util_get_buffer_size_len2(uint32_t len, size_t expected) "tpm2_resp->len = %u, expected = %zu"
 tpm_util_get_buffer_size(size_t len) "buffersize of device: %zu"
+tpm_util_show_buffer(const char *direction, size_t len, const char *buf) "direction: %s len: %zu\n%s"
 
 # tpm_emulator.c
 tpm_emulator_set_locality(uint8_t locty) "setting locality to %d"
@@ -36,7 +37,6 @@ tpm_emulator_pre_save(void) ""
 tpm_emulator_inst_init(void) ""
 
 # tpm_tis.c
-tpm_tis_show_buffer(const char *direction, size_t len, const char *buf) "direction: %s len: %zu\nbuf: %s"
 tpm_tis_raise_irq(uint32_t irqmask) "Raising IRQ for flag 0x%08x"
 tpm_tis_new_active_locality(uint8_t locty) "Active locality is now %d"
 tpm_tis_abort(uint8_t locty) "New active locality is %d"
Signature · 1 line
2.24.1
#2 lore raw

PATCH v9 2/6 spapr: Implement get_dt_compatible() callback

In reply to Stefan Berger

From: Stefan Berger <[email protected]>

For devices that cannot be statically initialized, implement a get_dt_compatible() callback that allows us to ask the device for the 'compatible' value.

---
 hw/ppc/spapr_vio.c         | 11 +++++++++--
 include/hw/ppc/spapr_vio.h |  1 +
 2 files changed, 10 insertions(+), 2 deletions(-)
hw/ppc/spapr_vio.c +9 -2
index 554de9930d..4b24b81797 100644
@@ -87,6 +87,7 @@ static int vio_make_devnode(SpaprVioDevice *dev,
     SpaprVioDeviceClass *pc = VIO_SPAPR_DEVICE_GET_CLASS(dev);
     int vdevice_off, node_off, ret;
     char *dt_name;
+    const char *dt_compatible;
 
     vdevice_off = fdt_path_offset(fdt, "/vdevice");
     if (vdevice_off < 0) {
@@ -113,9 +114,15 @@ static int vio_make_devnode(SpaprVioDevice *dev,
         }
     }
 
-    if (pc->dt_compatible) {
+    if (pc->get_dt_compatible) {
+        dt_compatible = pc->get_dt_compatible(dev);
+    } else {
+        dt_compatible = pc->dt_compatible;
+    }
+
+    if (dt_compatible) {
         ret = fdt_setprop_string(fdt, node_off, "compatible",
-                                 pc->dt_compatible);
+                                 dt_compatible);
         if (ret < 0) {
             return ret;
         }
include/hw/ppc/spapr_vio.h +1 -0
index ce6d9b0c66..bed7df60e3 100644
@@ -58,6 +58,7 @@ typedef struct SpaprVioDeviceClass {
     void (*realize)(SpaprVioDevice *dev, Error **errp);
     void (*reset)(SpaprVioDevice *dev);
     int (*devnode)(SpaprVioDevice *dev, void *fdt, int node_off);
+    const char *(*get_dt_compatible)(SpaprVioDevice *dev);
 } SpaprVioDeviceClass;
 
 struct SpaprVioDevice {
Signature · 1 line
2.24.1
#3 lore raw

PATCH v9 3/6 tpm_spapr: Support TPM for ppc64 using CRQ based interface

In reply to Stefan Berger

From: Stefan Berger <[email protected]>

Implement support for TPM on ppc64 by implementing the vTPM CRQ interface as a frontend. It can use the tpm_emulator driver backend with the external swtpm.

The Linux vTPM driver for ppc64 works with this emulation.

This TPM emulator also handles the TPM 2 case.

---
 docs/specs/tpm.txt   |  20 ++-
 hw/tpm/Kconfig       |   6 +
 hw/tpm/Makefile.objs |   1 +
 hw/tpm/tpm_spapr.c   | 379 +++++++++++++++++++++++++++++++++++++++++++
 hw/tpm/trace-events  |  12 ++
 include/sysemu/tpm.h |   3 +
 qapi/tpm.json        |   6 +-
 7 files changed, 423 insertions(+), 4 deletions(-)
 create mode 100644 hw/tpm/tpm_spapr.c
docs/specs/tpm.txt +19 -1
index 9c8cca042d..9c3e67d8a7 100644
@@ -34,6 +34,12 @@ The CRB interface makes a memory mapped IO region in the area 0xfed40000 -
 QEMU files related to TPM CRB interface:
  - hw/tpm/tpm_crb.c
 
+
+pSeries (ppc64) machines offer a tpm-spapr device model.
+
+QEMU files related to the SPAPR interface:
+ - hw/tpm/tpm_spapr.c
+
 = fw_cfg interface =
 
 The bios/firmware may read the "etc/tpm/config" fw_cfg entry for
@@ -281,7 +287,7 @@ swtpm socket --tpmstate dir=/tmp/mytpm1 \
   --log level=20
 
 Command line to start QEMU with the TPM emulator device communicating with
-the swtpm:
+the swtpm (x86):
 
 qemu-system-x86_64 -display sdl -accel kvm \
   -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
@@ -289,6 +295,18 @@ qemu-system-x86_64 -display sdl -accel kvm \
   -tpmdev emulator,id=tpm0,chardev=chrtpm \
   -device tpm-tis,tpmdev=tpm0 test.img
 
+In case a pSeries machine is emulated, use the following command line:
+
+qemu-system-ppc64 -display sdl -machine pseries,accel=kvm \
+  -m 1024 -bios slof.bin -boot menu=on \
+  -nodefaults -device VGA -device pci-ohci -device usb-kbd \
+  -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
+  -tpmdev emulator,id=tpm0,chardev=chrtpm \
+  -device tpm-spapr,tpmdev=tpm0 \
+  -device spapr-vscsi,id=scsi0,reg=0x00002000 \
+  -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x3,drive=drive-virtio-disk0,id=virtio-disk0 \
+  -drive file=test.img,format=raw,if=none,id=drive-virtio-disk0
+
 
 In case SeaBIOS is used as firmware, it should show the TPM menu item
 after entering the menu with 'ESC'.
hw/tpm/Kconfig +6 -0
index 4c8ee87d67..66a570aac1 100644
@@ -22,3 +22,9 @@ config TPM_EMULATOR
     bool
     default y
     depends on TPMDEV
+
+config TPM_SPAPR
+    bool
+    default n
+    select TPMDEV
+    depends on PSERIES
hw/tpm/Makefile.objs +1 -0
index de0b85d02a..85eb99ae05 100644
@@ -4,3 +4,4 @@ common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o
 common-obj-$(CONFIG_TPM_CRB) += tpm_crb.o
 common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o
 common-obj-$(CONFIG_TPM_EMULATOR) += tpm_emulator.o
+obj-$(CONFIG_TPM_SPAPR) += tpm_spapr.o
hw/tpm/tpm_spapr.c new file +379 -0

379 lines not on this page · raw message

hw/tpm/trace-events +12 -0
index 357c9e9a84..9143a8eaa3 100644
@@ -55,3 +55,15 @@ tpm_tis_pre_save(uint8_t locty, uint32_t rw_offset) "locty: %d, rw_offset = %u"
 
 # tpm_ppi.c
 tpm_ppi_memset(uint8_t *ptr, size_t size) "memset: %p %zu"
+
+# hw/tpm/tpm_spapr.c
+tpm_spapr_show_buffer(const char *direction, size_t len, const char *buf) "direction: %s len: %zu\n%s"
+tpm_spapr_do_crq(uint8_t raw1, uint8_t raw2) "1st 2 bytes in CRQ: 0x%02x 0x%02x"
+tpm_spapr_do_crq_crq_result(void) "SPAPR_VTPM_INIT_CRQ_RESULT"
+tpm_spapr_do_crq_crq_complete_result(void) "SPAPR_VTPM_INIT_CRQ_COMP_RESULT"
+tpm_spapr_do_crq_tpm_command(void) "got TPM command payload"
+tpm_spapr_do_crq_tpm_get_rtce_buffer_size(size_t buffersize) "response: buffer size is %zu"
+tpm_spapr_do_crq_get_version(uint32_t version) "response: version %u"
+tpm_spapr_do_crq_prepare_to_suspend(void) "response: preparing to suspend"
+tpm_spapr_do_crq_unknown_msg_type(uint8_t type) "Unknown message type 0x%02x"
+tpm_spapr_do_crq_unknown_crq(uint8_t raw1, uint8_t raw2) "unknown CRQ 0x%02x 0x%02x ..."
include/sysemu/tpm.h +3 -0
index 5b541a71c8..15979a3647 100644
@@ -45,11 +45,14 @@ typedef struct TPMIfClass {
 
 #define TYPE_TPM_TIS                "tpm-tis"
 #define TYPE_TPM_CRB                "tpm-crb"
+#define TYPE_TPM_SPAPR              "tpm-spapr"
 
 #define TPM_IS_TIS(chr)                             \
     object_dynamic_cast(OBJECT(chr), TYPE_TPM_TIS)
 #define TPM_IS_CRB(chr)                             \
     object_dynamic_cast(OBJECT(chr), TYPE_TPM_CRB)
+#define TPM_IS_SPAPR(chr)                           \
+    object_dynamic_cast(OBJECT(chr), TYPE_TPM_SPAPR)
 
 /* returns NULL unless there is exactly one TPM device */
 static inline TPMIf *tpm_find(void)
qapi/tpm.json +3 -3
index b30323bb6b..63878aa0f4 100644
@@ -12,11 +12,11 @@
 #
 # @tpm-tis: TPM TIS model
 # @tpm-crb: TPM CRB model (since 2.12)
+# @tpm-spapr: TPM SPAPR model (since 5.0)
 #
 # Since: 1.5
 ##
-{ 'enum': 'TpmModel', 'data': [ 'tpm-tis', 'tpm-crb' ] }
-
+{ 'enum': 'TpmModel', 'data': [ 'tpm-tis', 'tpm-crb', 'tpm-spapr' ] }
 ##
 # @query-tpm-models:
 #
@@ -29,7 +29,7 @@
 # Example:
 #
 # -> { "execute": "query-tpm-models" }
-# <- { "return": [ "tpm-tis", "tpm-crb" ] }
+# <- { "return": [ "tpm-tis", "tpm-crb", "tpm-spapr" ] }
 #
 ##
 { 'command': 'query-tpm-models', 'returns': ['TpmModel'] }
Signature · 1 line
2.24.1
#4 lore raw

PATCH v9 4/6 tpm_spapr: Support suspend and resume

In reply to Stefan Berger

From: Stefan Berger <[email protected]>

Extend the tpm_spapr frontend with VM suspend and resume support.

---
 hw/tpm/tpm_spapr.c  | 52 ++++++++++++++++++++++++++++++++++++++++++++-
 hw/tpm/trace-events |  2 ++
 2 files changed, 53 insertions(+), 1 deletion(-)
hw/tpm/tpm_spapr.c +51 -1
index 1db9696ae0..8ba561f41c 100644
@@ -76,6 +76,8 @@ typedef struct {
 
     unsigned char *buffer;
 
+    uint32_t numbytes; /* number of bytes to deliver on resume */
+
     TPMBackendCmd cmd;
 
     TPMBackend *be_driver;
@@ -240,6 +242,14 @@ static void tpm_spapr_request_completed(TPMIf *ti, int ret)
 
     /* a max. of be_buffer_size bytes can be transported */
     len = MIN(tpm_cmd_get_size(s->buffer), s->be_buffer_size);
+
+    if (runstate_check(RUN_STATE_FINISH_MIGRATE)) {
+        trace_tpm_spapr_caught_response(len);
+        /* defer delivery of response until .post_load */
+        s->numbytes = len;
+        return;
+    }
+
     rc = spapr_vio_dma_write(&s->vdev, be32_to_cpu(crq->data),
                              s->buffer, len);
 
@@ -288,6 +298,7 @@ static void tpm_spapr_reset(SpaprVioDevice *dev)
     SpaprTpmState *s = VIO_SPAPR_VTPM(dev);
 
     s->state = SPAPR_VTPM_STATE_NONE;
+    s->numbytes = 0;
 
     s->be_tpm_version = tpm_backend_get_tpm_version(s->be_driver);
 
@@ -309,9 +320,48 @@ static enum TPMVersion tpm_spapr_get_version(TPMIf *ti)
     return tpm_backend_get_tpm_version(s->be_driver);
 }
 
+/* persistent state handling */
+
+static int tpm_spapr_pre_save(void *opaque)
+{
+    SpaprTpmState *s = opaque;
+
+    tpm_backend_finish_sync(s->be_driver);
+    /*
+     * we cannot deliver the results to the VM since DMA would touch VM memory
+     */
+
+    return 0;
+}
+
+static int tpm_spapr_post_load(void *opaque, int version_id)
+{
+    SpaprTpmState *s = opaque;
+
+    if (s->numbytes) {
+        trace_tpm_spapr_post_load();
+        /* deliver the results to the VM via DMA */
+        tpm_spapr_request_completed(TPM_IF(s), 0);
+        s->numbytes = 0;
+    }
+
+    return 0;
+}
+
 static const VMStateDescription vmstate_spapr_vtpm = {
     .name = "tpm-spapr",
-    .unmigratable = 1,
+    .pre_save = tpm_spapr_pre_save,
+    .post_load = tpm_spapr_post_load,
+    .fields = (VMStateField[]) {
+        VMSTATE_SPAPR_VIO(vdev, SpaprTpmState),
+
+        VMSTATE_UINT8(state, SpaprTpmState),
+        VMSTATE_UINT32(numbytes, SpaprTpmState),
+        VMSTATE_VBUFFER_UINT32(buffer, SpaprTpmState, 0, NULL, numbytes),
+        /* remember DMA address */
+        VMSTATE_UINT32(crq.data, SpaprTpmState),
+        VMSTATE_END_OF_LIST(),
+    }
 };
 
 static Property tpm_spapr_properties[] = {
hw/tpm/trace-events +2 -0
index 9143a8eaa3..439e514787 100644
@@ -67,3 +67,5 @@ tpm_spapr_do_crq_get_version(uint32_t version) "response: version %u"
 tpm_spapr_do_crq_prepare_to_suspend(void) "response: preparing to suspend"
 tpm_spapr_do_crq_unknown_msg_type(uint8_t type) "Unknown message type 0x%02x"
 tpm_spapr_do_crq_unknown_crq(uint8_t raw1, uint8_t raw2) "unknown CRQ 0x%02x 0x%02x ..."
+tpm_spapr_post_load(void) "Delivering TPM response after resume"
+tpm_spapr_caught_response(uint32_t v) "Caught response to deliver after resume: %u bytes"
Signature · 1 line
2.24.1
Reviewed-by on v9 4/6
#5 lore raw

Re: [PATCH v9 4/6] tpm_spapr: Support suspend and resume

Quoted 6 lines · Stefan Berger

From: Stefan Berger <[email protected]>

Extend the tpm_spapr frontend with VM suspend and resume support.

Quoted 105 lines
---
 hw/tpm/tpm_spapr.c  | 52 ++++++++++++++++++++++++++++++++++++++++++++-
 hw/tpm/trace-events |  2 ++
 2 files changed, 53 insertions(+), 1 deletion(-)
hw/tpm/tpm_spapr.c +51 -1
index 1db9696ae0..8ba561f41c 100644
@@ -76,6 +76,8 @@ typedef struct {
 
     unsigned char *buffer;
 
+    uint32_t numbytes; /* number of bytes to deliver on resume */
+
     TPMBackendCmd cmd;
 
     TPMBackend *be_driver;
@@ -240,6 +242,14 @@ static void tpm_spapr_request_completed(TPMIf *ti, int ret)
 
     /* a max. of be_buffer_size bytes can be transported */
     len = MIN(tpm_cmd_get_size(s->buffer), s->be_buffer_size);
+
+    if (runstate_check(RUN_STATE_FINISH_MIGRATE)) {
+        trace_tpm_spapr_caught_response(len);
+        /* defer delivery of response until .post_load */
+        s->numbytes = len;
+        return;
+    }
+
     rc = spapr_vio_dma_write(&s->vdev, be32_to_cpu(crq->data),
                              s->buffer, len);
 
@@ -288,6 +298,7 @@ static void tpm_spapr_reset(SpaprVioDevice *dev)
     SpaprTpmState *s = VIO_SPAPR_VTPM(dev);
 
     s->state = SPAPR_VTPM_STATE_NONE;
+    s->numbytes = 0;
 
     s->be_tpm_version = tpm_backend_get_tpm_version(s->be_driver);
 
@@ -309,9 +320,48 @@ static enum TPMVersion tpm_spapr_get_version(TPMIf *ti)
     return tpm_backend_get_tpm_version(s->be_driver);
 }
 
+/* persistent state handling */
+
+static int tpm_spapr_pre_save(void *opaque)
+{
+    SpaprTpmState *s = opaque;
+
+    tpm_backend_finish_sync(s->be_driver);
+    /*
+     * we cannot deliver the results to the VM since DMA would touch VM memory
+     */
+
+    return 0;
+}
+
+static int tpm_spapr_post_load(void *opaque, int version_id)
+{
+    SpaprTpmState *s = opaque;
+
+    if (s->numbytes) {
+        trace_tpm_spapr_post_load();
+        /* deliver the results to the VM via DMA */
+        tpm_spapr_request_completed(TPM_IF(s), 0);
+        s->numbytes = 0;
+    }
+
+    return 0;
+}
+
 static const VMStateDescription vmstate_spapr_vtpm = {
     .name = "tpm-spapr",
-    .unmigratable = 1,
+    .pre_save = tpm_spapr_pre_save,
+    .post_load = tpm_spapr_post_load,
+    .fields = (VMStateField[]) {
+        VMSTATE_SPAPR_VIO(vdev, SpaprTpmState),
+
+        VMSTATE_UINT8(state, SpaprTpmState),
+        VMSTATE_UINT32(numbytes, SpaprTpmState),
+        VMSTATE_VBUFFER_UINT32(buffer, SpaprTpmState, 0, NULL, numbytes),
+        /* remember DMA address */
+        VMSTATE_UINT32(crq.data, SpaprTpmState),
+        VMSTATE_END_OF_LIST(),
+    }
 };
 
 static Property tpm_spapr_properties[] = {
hw/tpm/trace-events +2 -1
index 9143a8eaa3..439e514787 100644
@@ -67,3 +67,5 @@ tpm_spapr_do_crq_get_version(uint32_t version) "response: version %u"
 tpm_spapr_do_crq_prepare_to_suspend(void) "response: preparing to suspend"
 tpm_spapr_do_crq_unknown_msg_type(uint8_t type) "Unknown message type 0x%02x"
 tpm_spapr_do_crq_unknown_crq(uint8_t raw1, uint8_t raw2) "unknown CRQ 0x%02x 0x%02x ..."
+tpm_spapr_post_load(void) "Delivering TPM response after resume"
+tpm_spapr_caught_response(uint32_t v) "Caught response to deliver after resume: %u bytes"
--

2.24.1

Signature · 1 line
Marc-André Lureau
#6 lore raw

PATCH v9 5/6 hw/ppc/Kconfig: Enable TPM_SPAPR as part of PSERIES config

In reply to Stefan Berger

From: Stefan Berger <[email protected]>

---
 hw/ppc/Kconfig | 1 +
 1 file changed, 1 insertion(+)
hw/ppc/Kconfig +1 -0
index e27efe9a24..35c95d2284 100644
@@ -12,6 +12,7 @@ config PSERIES
     select MSI_NONBROKEN
     select FDT_PPC
     select CHRP_NVRAM
+    select TPM_SPAPR
 
 config SPAPR_RNG
     bool
Signature · 1 line
2.24.1
#7 lore raw

PATCH v9 6/6 docs/specs/tpm: reST-ify TPM documentation

In reply to Stefan Berger

From: Marc-André Lureau <[email protected]>

---
 docs/specs/index.rst |   1 +
 docs/specs/tpm.rst   | 503 +++++++++++++++++++++++++++++++++++++++++++
 docs/specs/tpm.txt   | 445 --------------------------------------
 3 files changed, 504 insertions(+), 445 deletions(-)
 create mode 100644 docs/specs/tpm.rst
 delete mode 100644 docs/specs/tpm.txt
docs/specs/index.rst +1 -0
index 984ba44029..de46a8b5e7 100644
@@ -13,3 +13,4 @@ Contents:
    ppc-xive
    ppc-spapr-xive
    acpi_hw_reduced_hotplug
+   tpm
docs/specs/tpm.rst new file +503 -0

503 lines not on this page · raw message

docs/specs/tpm.txt deleted +0 -445

445 lines not on this page · raw message

Signature · 1 line
2.24.1
Applied
#8 lore raw
In reply to Stefan Berger
Quoted 26 lines · Stefan Berger

The following series of patches adds vTPM emulator support for the ppc64 platform (pSeries).

It can be tested as follows with swtpm/libtpms:

mkdir /tmp/mytpm1
swtpm socket --tpmstate dir=/tmp/mytpm1 \
--ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
--log level=20

If TPM 2 is desired, add --tpm2 as parameter to the above.

In another terminal start QEMU:

sudo ./ppc64-softmmu/qemu-system-ppc64 -display sdl \
	-machine pseries,accel=kvm \
	-m 1024 -bios slof.bin -boot menu=on \
	-nodefaults -device VGA -device pci-ohci -device usb-kbd \
	-chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
	-tpmdev emulator,id=tpm0,chardev=chrtpm \
	-device tpm-spapr,tpmdev=tpm0 \
	-device spapr-vscsi,id=scsi0,reg=0x00002000 \
	-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x3,drive=drive-virtio-disk0,id=virtio-disk0 \
	-drive file=test.img,format=raw,if=none,id=drive-virtio-disk0
Quoted 3 lines

Links:
- libtpms: https://github.com/stefanberger/libtpms/wiki
- swtpm: https://github.com/stefanberger/swtpm/wiki

Applied to ppc-for-5.0, thanks.

Quoted 73 lines

Changes:
v8->v9:
- Allocating buffer now so we can use VMSTATE_VBUFFER_UINT32 for the regular buffer (no more suspend buffer)

v7->v8:
- Folded documentation patch into 3rd patch
- Added Marc-André's patch to end of series

v6->v7:
- Implemented get_dt_compatible() and using it
- Moved tpm_this_show_buffer to tpm_util.c

v5->v6:
- adjusted names of structures and simplified
- only transmitting min. necessary bytes to pass to VM after resume
- addressed other issues pointed out by D. Gibson

v4->v5:
- use runstate_check(RUN_STATE_FINISH_MIGRATE) to check whether devices are suspending; ditch 3 patches in this series that tried to do similar

v3->v4:
- addressed comments to v3
- reworked suspend/resume support that requires extensions to backends

v2->v3:
- patch 1: a TPM 2 is identified by IBM,vtpm20 in the compatible node
- patch 1: convert to tracing to display Tx and Rx buffers
- added documentation patch
- added patch to enable TPM device as part of pSeries

v1->v2:
- followed Cedric Le Goater's suggestions to patch 1
- send appropriate CRQ error responses if DMA read or write fails
- renamed tpm_spapr_got_payload to tpm_spapr_process_cmd and pass endianess-adjusted data pointer from CRQ to it

Regards,
Stefan

Marc-André Lureau (1):
docs/specs/tpm: reST-ify TPM documentation

Stefan Berger (5):
tpm: Move tpm_tis_show_buffer to tpm_util.c
spapr: Implement get_dt_compatible() callback
tpm_spapr: Support TPM for ppc64 using CRQ based interface
tpm_spapr: Support suspend and resume hw/ppc/Kconfig: Enable TPM_SPAPR as part of PSERIES config

 docs/specs/index.rst       |   1 +
 docs/specs/tpm.rst         | 503 +++++++++++++++++++++++++++++++++++++
 docs/specs/tpm.txt         | 427 -------------------------------
 hw/ppc/Kconfig             |   1 +
 hw/ppc/spapr_vio.c         |  11 +-
 hw/tpm/Kconfig             |   6 +
 hw/tpm/Makefile.objs       |   1 +
 hw/tpm/tpm_spapr.c         | 429 +++++++++++++++++++++++++++++++
 hw/tpm/tpm_tis.c           |  32 +--
 hw/tpm/tpm_util.c          |  25 ++
 hw/tpm/tpm_util.h          |   3 +
 hw/tpm/trace-events        |  16 +-
 include/hw/ppc/spapr_vio.h |   1 +
 include/sysemu/tpm.h       |   3 +
 qapi/tpm.json              |   6 +-
 15 files changed, 1004 insertions(+), 461 deletions(-)
 create mode 100644 docs/specs/tpm.rst
 delete mode 100644 docs/specs/tpm.txt
 create mode 100644 hw/tpm/tpm_spapr.c
Signature · 4 lines
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson