Max3420 udc driver
Subsystems (2)
v3 cover Max3420 udc driver
From: Jassi Brar <[email protected]>
Changes since v2:
# Remove inconsistent licence term from the driver
Changes since v1:
# No functional changes, just cosmetic changes as suggested in review.
o prepend everything with MAX3420_
o avoid CaMeLcAsE
o use GENMASK some more
o reorder struct max3420_ep and struct max3420_udc members
o added some comments
o changed license in dt-bindings
o changed interrupt property to names
Jassi Brar (2):
dt-bindings: max3421-udc: add dt bindings for MAX3420 UDC
usb: gadget: add udc driver for max3420
.../bindings/usb/maxim,max3420-udc.yaml | 69 + drivers/usb/gadget/udc/Kconfig | 10 + drivers/usb/gadget/udc/Makefile | 1 + drivers/usb/gadget/udc/max3420_udc.c | 1331 +++++++++++++++++ 4 files changed, 1411 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml create mode 100644 drivers/usb/gadget/udc/max3420_udc.c
Signature · 1 line
2.20.1
PATCH v3 1/2 dt-bindings: max3421-udc: add dt bindings for MAX3420 UDC
From: Jassi Brar <[email protected]>
Add YAML dt bindings for Maxim MAX3420 UDC controller.
--- .../bindings/usb/maxim,max3420-udc.yaml | 69 +++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml
Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml new file +69 -0
@@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/maxim,max3420-udc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAXIM MAX3420/1 USB Peripheral Controller + +maintainers: + - Jassi Brar <[email protected]> + +description: | + The controller provices USB2.0 compliant FullSpeed peripheral + implementation over the SPI interface. + + Specifications about the part can be found at: + http://datasheets.maximintegrated.com/en/ds/MAX3420E.pdf + +properties: + compatible: + enum: + - maxim,max3420-udc + - maxim,max3421-udc + + reg: + maxItems: 1 + + interrupts: + items: + - description: usb irq from max3420 + - description: vbus detection irq + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: udc + - const: vbus + minItems: 1 + maxItems: 2 + + spi-max-frequency: + maximum: 26000000 + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + udc@0 { + compatible = "maxim,max3420-udc"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>, <10 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "udc", "vbus"; + spi-max-frequency = <12500000>; + }; + };
Signature · 1 line
2.20.1
PATCH v3 2/2 usb: gadget: add udc driver for max3420
In reply to [email protected]From: Jassi Brar <[email protected]>
The MAX3420 is USB2.0 only, UDC-over-SPI controller. This driver also supports the peripheral mode of MAX3421.
--- drivers/usb/gadget/udc/Kconfig | 10 + drivers/usb/gadget/udc/Makefile | 1 + drivers/usb/gadget/udc/max3420_udc.c | 1331 ++++++++++++++++++++++++++ 3 files changed, 1342 insertions(+) create mode 100644 drivers/usb/gadget/udc/max3420_udc.c
drivers/usb/gadget/udc/Kconfig +10 -0
@@ -441,6 +441,16 @@ config USB_GADGET_XILINX dynamically linked module called "udc-xilinx" and force all gadget drivers to also be dynamically linked. +config USB_MAX3420_UDC + tristate "MAX3420 (USB-over-SPI) support" + depends on SPI + help + The Maxim MAX3420 chip supports USB2.0 full-speed peripheral mode. + The MAX3420 is run by SPI interface, and hence the dependency. + + To compile this driver as a module, choose M here: the module will + be called max3420_udc + config USB_TEGRA_XUDC tristate "NVIDIA Tegra Superspeed USB 3.0 Device Controller" depends on ARCH_TEGRA || COMPILE_TEST
drivers/usb/gadget/udc/Makefile +1 -0
@@ -42,3 +42,4 @@ obj-$(CONFIG_USB_GADGET_XILINX) += udc-xilinx.o obj-$(CONFIG_USB_SNP_UDC_PLAT) += snps_udc_plat.o obj-$(CONFIG_USB_ASPEED_VHUB) += aspeed-vhub/ obj-$(CONFIG_USB_BDC_UDC) += bdc/ +obj-$(CONFIG_USB_MAX3420_UDC) += max3420_udc.o
drivers/usb/gadget/udc/max3420_udc.c new file +1331 -0
1,331 lines not on this page · raw message
Signature · 1 line
2.20.1