selftests/eeh: Bump EEH wait time to 60s
PATCH 1/1 selftests/eeh: Bump EEH wait time to 60s
Some newer cards supported by aacraid can take up to 40s to recover after an EEH event. This causes spurious failures in the basic EEH self-test since the current maximim timeout is only 30s.
Fix the immediate issue by bumping the timeout to a default of 60s, and allow the wait time to be specified via an environmental variable (EEH_MAX_WAIT).
--- tools/testing/selftests/powerpc/eeh/eeh-functions.sh | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
tools/testing/selftests/powerpc/eeh/eeh-functions.sh +7 -3
@@ -53,9 +53,13 @@ eeh_one_dev() { # is a no-op. echo $dev >/sys/kernel/debug/powerpc/eeh_dev_check - # Enforce a 30s timeout for recovery. Even the IPR, which is infamously - # slow to reset, should recover within 30s. - max_wait=30 + # Default to a 60s timeout when waiting for a device to recover. This + # is an arbitrary default which can be overridden by setting the + # EEH_MAX_WAIT environmental variable when required. + + # The current record holder for longest recovery time is: + # "Adaptec Series 8 12G SAS/PCIe 3" at 39 seconds + max_wait=${EEH_MAX_WAIT:=60} for i in `seq 0 ${max_wait}` ; do if pe_ok $dev ; then
Signature · 1 line
2.21.1
Michael Ellerman
AppliedQuoted 11 lines · Oliver O'Halloran
Some newer cards supported by aacraid can take up to 40s to recover after an EEH event. This causes spurious failures in the basic EEH self-test since the current maximim timeout is only 30s.
Fix the immediate issue by bumping the timeout to a default of 60s, and allow the wait time to be specified via an environmental variable (
EEH_MAX_WAIT).Reported-by Steve Best <[email protected]>Suggested-by Douglas Miller <[email protected]>Signed-off-by Oliver O'Halloran <[email protected]>
Applied to powerpc next, thanks.
https://git.kernel.org/powerpc/c/414f50434aa2463202a5b35e844f4125dd1a7101
cheers