dt-bindings: spi: convert rockchip spi bindings to yaml
Subsystems (3)
PATCH v2 1/3 dt-bindings: spi: convert rockchip spi bindings to yaml
Current dts files with 'spi' nodes are manually verified. In order to automate this process spi-rockchip.txt has to be converted to yaml. In the new setup spi-rockchip.yaml will inherit properties from spi-controller.yaml.
Add document to MAINTAINERS.
Also rk3188.dtsi, rk3288.dtsi, rk3368.dtsi and rk3399.dtsi use an extra fallback string, so change this in the documentation.
Changed:
"rockchip,rk3188-spi", "rockchip,rk3066-spi"
"rockchip,rk3288-spi", "rockchip,rk3066-spi"
"rockchip,rk3368-spi", "rockchip,rk3066-spi"
"rockchip,rk3399-spi", "rockchip,rk3066-spi"
--- .../devicetree/bindings/spi/spi-rockchip.txt | 58 ------------ .../devicetree/bindings/spi/spi-rockchip.yaml | 105 +++++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 106 insertions(+), 58 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.txt create mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.yaml
Documentation/devicetree/bindings/spi/spi-rockchip.txt deleted +0 -58
@@ -1,58 +0,0 @@ -* Rockchip SPI Controller - -The Rockchip SPI controller is used to interface with various devices such as flash -and display controllers using the SPI communication interface. - -Required Properties: - -- compatible: should be one of the following. - "rockchip,rv1108-spi" for rv1108 SoCs. - "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs. - "rockchip,rk3036-spi" for rk3036 SoCS. - "rockchip,rk3066-spi" for rk3066 SoCs. - "rockchip,rk3188-spi" for rk3188 SoCs. - "rockchip,rk3228-spi" for rk3228 SoCS. - "rockchip,rk3288-spi" for rk3288 SoCs. - "rockchip,rk3368-spi" for rk3368 SoCs. - "rockchip,rk3399-spi" for rk3399 SoCs. -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The interrupt number to the cpu. The interrupt specifier format - depends on the interrupt controller. -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for - the peripheral clock. -- #address-cells: should be 1. -- #size-cells: should be 0. - -Optional Properties: - -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request names should include "tx" and "rx" if present. -- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling - Rx data (may need to be fine tuned for high capacitance lines). - No delay (0) by default. -- pinctrl-names: Names for the pin configuration(s); may be "default" or - "sleep", where the "sleep" configuration may describe the state - the pins should be in during system suspend. See also - pinctrl/pinctrl-bindings.txt. - - -Example: - - spi0: spi@ff110000 { - compatible = "rockchip,rk3066-spi"; - reg = <0xff110000 0x1000>; - dmas = <&pdma1 11>, <&pdma1 12>; - dma-names = "tx", "rx"; - rx-sample-delay-ns = <10>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; - clock-names = "spiclk", "apb_pclk"; - pinctrl-0 = <&spi1_pins>; - pinctrl-1 = <&spi1_sleep>; - pinctrl-names = "default", "sleep"; - };
Documentation/devicetree/bindings/spi/spi-rockchip.yaml new file +105 -0
105 lines not on this page · raw message
MAINTAINERS +1 -0
@@ -2240,6 +2240,7 @@ L: [email protected] T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git S: Maintained F: Documentation/devicetree/bindings/i2c/i2c-rk3x.txt +F: Documentation/devicetree/bindings/spi/spi-rockchip.yaml F: arch/arm/boot/dts/rk3* F: arch/arm/boot/dts/rv1108* F: arch/arm/mach-rockchip/
Signature · 1 line
2.11.0
PATCH v2 2/3 dt-bindings: spi: spi-rockchip: add description for rk3308
The description below is already in use for rk3308.dtsi, but was somehow never added to a document, so add "rockchip,rk3308-spi", "rockchip,rk3066-spi" for spi nodes on a rk3308 platform to spi-rockchip.yaml.
--- Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/spi/spi-rockchip.yaml +1 -0
@@ -29,6 +29,7 @@ properties: - rockchip,px30-spi #for px30 SoCs. - rockchip,rk3188-spi #for rk3188 SoCs. - rockchip,rk3288-spi #for rk3288 SoCs. + - rockchip,rk3308-spi #for rk3308 SoCs. - rockchip,rk3368-spi #for rk3368 SoCs. - rockchip,rk3399-spi #for rk3399 SoCs. - const: rockchip,rk3066-spi
Signature · 1 line
2.11.0
PATCH v2 3/3 dt-bindings: spi: spi-rockchip: add description for rk3328
In reply to Johan JonkerThe description below is already in use for rk3328.dtsi, but was somehow never added to a document, so add "rockchip,rk3328-spi", "rockchip,rk3066-spi" for spi nodes on a rk3328 platform to spi-rockchip.yaml.
--- Documentation/devicetree/bindings/spi/spi-rockchip.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/spi/spi-rockchip.yaml +1 -0
@@ -30,6 +30,7 @@ properties: - rockchip,rk3188-spi #for rk3188 SoCs. - rockchip,rk3288-spi #for rk3288 SoCs. - rockchip,rk3308-spi #for rk3308 SoCs. + - rockchip,rk3328-spi #for rk3328 SoCs. - rockchip,rk3368-spi #for rk3368 SoCs. - rockchip,rk3399-spi #for rk3399 SoCs. - const: rockchip,rk3066-spi
Signature · 1 line
2.11.0
Mark Brown
maintainerQuoted 7 lines · Johan Jonker
Current dts files with 'spi' nodes are manually verified. In order to automate this process spi-rockchip.txt has to be converted to yaml. In the new setup
spi-rockchip.yamlwill inherit properties fromspi-controller.yaml.Add document to
MAINTAINERS.
This doesn't apply against current code, please check and resend.