ALSA: usb-audio: add quirks for Line6 Helix fw 2.82
PATCH 1/1 ALSA: usb-audio: add quirks for Line6 Helix fw 2.82
Line6 Helix fw 2.82 still needs a quirk to set the audio rate to 48khz but in respect to older firmware has changed the USB ID of the device.
Add it to the quirk list for line6 helix family of devices.
--- sound/usb/format.c | 1 + 1 file changed, 1 insertion(+)
sound/usb/format.c +1 -0
@@ -296,6 +296,7 @@ static int line6_parse_audio_format_rates_quirk(struct snd_usb_audio *chip,case USB_ID (0x0E41 ,0x4242 ):/* Line6 Helix Rack */ case USB_ID (0x0E41 ,0x4244 ):/* Line6 Helix LT */ case USB_ID (0x0E41 ,0x4246 ):/* Line6 HX-Stomp */ +case USB_ID (0x0E41 ,0x4248 ):/* Line6 Helix >= fw 2.82 */ /* supported rates: 48Khz */ kfree (fp->rate_table); fp->rate_table =kmalloc (sizeof (int ),GFP_KERNEL );
Signature · 6 lines
2.20.1 _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 7 lines · Nicola Lunghi
Line6 Helix fw 2.82 still needs a quirk to set the audio rate to 48khz but in respect to older firmware has changed the USB ID of the device.
Add it to the quirk list for line6 helix family of devices.
Signed-off-by Nicola Lunghi <[email protected]>
Applied now. Thanks.
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Hi
Why this incomplete patch ???
I longer informed you that with fw >= 2.8 lot of helix kind devices got a new ID:
So this patch should include at least the well known/collected data:
case USB_ID(0x0E41, 0x424a): /* Line6 Helix LT - firmware >= 2.8 */
Jens
Signature · 11 lines
Jens Verwiebe Allerskehre 44 - 22309 Hamburg Tel.: +49 40 68 78 50 mailto: [email protected] web: https://www.jensverwiebe.de _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 11 lines · Jens Verwiebe
Hi
Why this incomplete patch ???
I longer informed you that with fw >= 2.8 lot of helix kind devices got a new ID:
So this patch should include at least the well known/collected data:
case
USB_ID(0x0E41, 0x424a): /* Line6 Helix LT - firmware >= 2.8 */
Oh, so the patch doesn't work as is?
Then I drop it again.
If anyone can resubmit the comprehensive one and give the tested-by tag, I'll happily apply it.
thanks,
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Hi Jens
Quoted 10 lines · Takashi Iwai
Quoted 7 lines · Jens Verwiebe
Hi
Why this incomplete patch ???
I longer informed you that with fw >= 2.8 lot of helix kind devices got a new ID:
Yes you told me but you didn't give me a list of the ID nor confirm that you can test something.
The reason of this patch is that I created a post in the Line6 forum when you told me that and the only user that
confirmed that the patch work with newer firmware with Helix is Carlo Calica.
I sadly have only access to an hx stomp and I don't want to put patches that I cannot verify.
If you have access to other hardware instead of sending email to me you should submit something yourself.
Cheers
Nicola Lunghi
Quoted 8 lines
Quoted 4 lines
So this patch should include at least the well known/collected data:
case
USB_ID(0x0E41, 0x424a): /* Line6 Helix LT - firmware >= 2.8 */Oh, so the patch doesn't work as is?
Then I drop it again.
Quoted 7 lines
If anyone can resubmit the comprehensive one and give the tested-by tag, I'll happily apply it.
thanks,
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Shall i show you the line6 forum entry where ppl confirmed ?
Also my much older thread has info i gave you before:
https://line6.com/support/topic/4426-line-6-with-linux/#comments
So please don't miss that. The response from users is poor enough.
Jens
Signature · 11 lines
Jens Verwiebe Allerskehre 44 - 22309 Hamburg Tel.: +49 40 68 78 50 mailto: [email protected] web: https://www.jensverwiebe.de _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
В Сб, 25/01/2020 в 15:16 +0100, Takashi Iwai пишет:
Quoted 9 lines
Quoted 7 lines · Jens Verwiebe
Hi
Why this incomplete patch ???
I longer informed you that with fw >= 2.8 lot of helix kind devices got a new ID:
Quoted 8 lines
Quoted 4 lines
So this patch should include at least the well known/collected data:
case
USB_ID(0x0E41, 0x424a): /* Line6 Helix LT - firmware >= 2.8 */Oh, so the patch doesn't work as is?
Then I drop it again.
No, Jens complained that the quirk should also be applied to other devices from the Helix line that recieved new firmware. Not sure what's the problem with submitting them in a follow-up patch.
Quoted 2 lines
If anyone can resubmit the comprehensive one and give the tested-by tag, I'll happily apply it.
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Kinda
Nicola made a request in the line6 forums and got at least helix lt confirmed.
As he took over my original patch + a fallback i want leave this to him to
maintain all new ( core ) ID's now.
Also i'd like to mention again that this "hardclocking" only makes helix devices
setup initially but does not prevent the sync shifting away after some time.
I was hoping the solution Mike Oliphant found for the Boss device would also fix the Helix sync,
but there is a bit more todo i fear. ( implicit feedback not working )
Still on that ....
Jens
Signature · 11 lines
Jens Verwiebe Allerskehre 44 - 22309 Hamburg Tel.: +49 40 68 78 50 mailto: [email protected] web: https://www.jensverwiebe.de _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel