serial: ns16550: Use old baud rate divisor for flushing if not given
PATCH 1/1 serial: ns16550: Use old baud rate divisor for flushing if not given
If baud_divisor is not set (i.e. == -1), we should use the baud divisor already in use for flushing the xmit register. If we don't flush the xmit register, then SPL will hang.
Signed-off-by Patrik Dahlström <[email protected]>
--- drivers/serial/ns16550.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/serial/ns16550.c +7 -0
@@ -170,6 +170,13 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) == UART_LSR_THRE) {if (baud_divisor !=-1 )NS16550_setbrg (com_port, baud_divisor); +else { +// Re-use old baud rate divisor to flush transmit reg. +const int dll =serial_in (&com_port->dll); +const int dlm =serial_in (&com_port->dlm); +const int divisor = dll | (dlm <<8 ); +NS16550_setbrg (com_port, divisor); + }serial_out (0 , &com_port->mdr1); }#endif
Signature · 1 line
2.17.1
PATCH 1/1 serial: ns16550: Use old baud rate divisor for flushing if not given
Quoted 5 lines · Patrik Dahlström
If
baud_divisoris not set (i.e. == -1), we should use the baud divisor already in use for flushing the xmit register. If we don't flush the xmit register, then SPL will hang.Signed-off-by Patrik Dahlström <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200125/2d040723/attachment.sig>