Skip to contentSkip to conversation

ar5523: Add USB ID of SMCWUSBT-G2 wireless adapter

PATCH In review Mert Dirik 2 participants 2 messages Jan 16, 2020 – Jan 26, 2020 USB AR5523 wireless driver

lore
Share & tools
lore

Mert Dirik

author
#0 lore raw

PATCH 1/1 ar5523: Add USB ID of SMCWUSBT-G2 wireless adapter

Add the required USB ID for running SMCWUSBT-G2 wireless adapter (SMC "EZ Connect g").

This device uses ar5523 chipset and requires firmware to be loaded. Even though pid of the device is 4507, this patch adds it as 4506 so that AR5523_DEVICE_UG macro can set the AR5523_FLAG_PRE_FIRMWARE flag for pid 4507.

---
 drivers/net/wireless/ath/ar5523/ar5523.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/wireless/ath/ar5523/ar5523.c +2 -0
index da2d179430ca..4c57e79e5779 100644
@@ -1770,6 +1770,8 @@ static const struct usb_device_id ar5523_id_table[] = {
 	AR5523_DEVICE_UX(0x0846, 0x4300),	/* Netgear / WG111U */
 	AR5523_DEVICE_UG(0x0846, 0x4250),	/* Netgear / WG111T */
 	AR5523_DEVICE_UG(0x0846, 0x5f00),	/* Netgear / WPN111 */
+	AR5523_DEVICE_UG(0x083a, 0x4506),	/* SMC / EZ Connect
+						   SMCWUSBT-G2 */
 	AR5523_DEVICE_UG(0x157e, 0x3006),	/* Umedia / AR5523_1 */
 	AR5523_DEVICE_UX(0x157e, 0x3205),	/* Umedia / AR5523_2 */
 	AR5523_DEVICE_UG(0x157e, 0x3006),	/* Umedia / TEW444UBEU */
Signature · 1 line
2.20.1
#1 lore raw
Quoted 10 lines · Mert Dirik

Add the required USB ID for running SMCWUSBT-G2 wireless adapter (SMC "EZ Connect g").

This device uses ar5523 chipset and requires firmware to be loaded. Even though pid of the device is 4507, this patch adds it as 4506 so that AR5523_DEVICE_UG macro can set the AR5523_FLAG_PRE_FIRMWARE flag for pid 4507.

Patch applied to ath-next branch of ath.git, thanks.

5b362498a796 ar5523: Add USB ID of SMCWUSBT-G2 wireless adapter

Signature · 3 lines
https://patchwork.kernel.org/patch/11336579/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches