Skip to contentSkip to conversation

Renesas RZ/G2N extend peripheral support

PATCH New Lad Prabhakar 3 participants 12 messages Jan 27, 2020 – Jan 31, 2020

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

cover Renesas RZ/G2N extend peripheral support

This patch series adds support for following peripherals supported by RZ/G2N, along with adding support for HiHope RZ/G2N sub board
1: DMAC
2: SCIF/HSCIF
3: GPIO controller
4: Ethernet controller

Biju Das (8):
dt-bindings: dmaengine: rcar-dmac: Document R8A774B1 bindings
arm64: dts: renesas: r8a774b1: Add SYS-DMAC device nodes
arm64: dts: renesas: r8a774b1: Add SCIF and HSCIF nodes
dt-bindings: gpio: rcar: Add DT binding for r8a774b1
arm64: dts: renesas: r8a774b1: Add GPIO device nodes
dt-bindings: net: ravb: Add support for r8a774b1 SoC
arm64: dts: renesas: r8a774b1: Add Ethernet AVB node
arm64: dts: renesas: Add HiHope RZ/G2N sub board support

 .../devicetree/bindings/dma/renesas,rcar-dmac.txt  |   1 +
 .../devicetree/bindings/gpio/renesas,gpio-rcar.txt |   1 +
 .../devicetree/bindings/net/renesas,ravb.txt       |   1 +
 arch/arm64/boot/dts/renesas/Makefile               |   1 +
 .../boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts  |  15 +
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi          | 381 ++++++++++++++++++++-
 6 files changed, 389 insertions(+), 11 deletions(-)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/8 dt-bindings: dmaengine: rcar-dmac: Document R8A774B1 bindings

From: Biju Das <[email protected]>

commit 9d2bbbc21772f133fd693bf10f38982e17f6549f upstream.

Renesas RZ/G2N (R8A774B1) SoC also has the R-Car gen2/3 compatible DMA controllers, therefore document RZ/G2N specific bindings.

---
 Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt +1 -0
index e78a621..b6927eb 100644
@@ -20,6 +20,7 @@ Required Properties:
 		- "renesas,dmac-r8a7745" (RZ/G1E)
 		- "renesas,dmac-r8a77470" (RZ/G1C)
 		- "renesas,dmac-r8a774a1" (RZ/G2M)
+		- "renesas,dmac-r8a774b1" (RZ/G2N)
 		- "renesas,dmac-r8a774c0" (RZ/G2E)
 		- "renesas,dmac-r8a7790" (R-Car H2)
 		- "renesas,dmac-r8a7791" (R-Car M2-W)
Signature · 1 line
2.7.4
#2 lore raw

PATCH 2/8 arm64: dts: renesas: r8a774b1: Add SYS-DMAC device nodes

In reply to Lad Prabhakar

From: Biju Das <[email protected]>

commit fd863e5880623c858e00f8924f8ee63be290d9d6 upstream.

Add sys-dmac[0-2] device nodes for RZ/G2N (R8A774B1) SoC.

---
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 102 ++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)
arch/arm64/boot/dts/renesas/r8a774b1.dtsi +102 -0
index fc7aec6..ac3c411 100644
@@ -252,6 +252,108 @@
 			/* placeholder */
 		};
 
+		dmac0: dma-controller at e6700000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac1: dma-controller at e7300000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac2: dma-controller at e7310000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
 		avb: ethernet at e6800000 {
 			reg = <0 0xe6800000 0 0x800>;
 			/* placeholder */
Signature · 1 line
2.7.4
#3 lore raw

PATCH 3/8 arm64: dts: renesas: r8a774b1: Add SCIF and HSCIF nodes

In reply to Lad Prabhakar

From: Biju Das <[email protected]>

commit 83e7620a0417cd2716bda35bb89549ffb8692ea0 upstream.

Add the device nodes for RZ/G2N SCIF and HSCIF serial ports, including clocks, power domains and DMAs.

---
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 173 +++++++++++++++++++++++++++++-
 1 file changed, 171 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/renesas/r8a774b1.dtsi +171 -2
index ac3c411..e6c8cca 100644
@@ -237,8 +237,91 @@
 		};
 
 		hscif0: serial at e6540000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
 			reg = <0 0xe6540000 0 0x60>;
-			/* placeholder */
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial at e6550000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial at e6560000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial at e66a0000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial at e66b0000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
 		};
 
 		hsusb: usb at e6590000 {
@@ -374,20 +457,106 @@
 			/* placeholder */
 		};
 
+		scif0: serial at e6e60000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial at e6e68000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
 		scif2: serial at e6e88000 {
 			compatible = "renesas,scif-r8a774b1",
 				     "renesas,rcar-gen3-scif", "renesas,scif";
-			reg = <0 0xe6e88000 0 64>;
+			reg = <0 0xe6e88000 0 0x40>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 310>,
 				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
 			resets = <&cpg 310>;
 			status = "disabled";
 		};
 
+		scif3: serial at e6c50000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial at e6c40000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial at e6f30000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 0x40>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
 		rcar_sound: sound at ec500000 {
 			reg = <0 0xec500000 0 0x1000>, /* SCU */
 			      <0 0xec5a0000 0 0x100>,  /* ADG */
Signature · 1 line
2.7.4
#4 lore raw

PATCH 4/8 dt-bindings: gpio: rcar: Add DT binding for r8a774b1

In reply to Lad Prabhakar

From: Biju Das <[email protected]>

commit 5ede17d61592844c6d09eaba513f9de14920965c upstream.

Document Renesas' RZ/G2N (R8A774B1) GPIO blocks compatibility within the relevant dt-bindings.

---
 Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +1 -0
index a67a110..8551905 100644
@@ -7,6 +7,7 @@ Required Properties:
     - "renesas,gpio-r8a7745": for R8A7745 (RZ/G1E) compatible GPIO controller.
     - "renesas,gpio-r8a77470": for R8A77470 (RZ/G1C) compatible GPIO controller.
     - "renesas,gpio-r8a774a1": for R8A774A1 (RZ/G2M) compatible GPIO controller.
+    - "renesas,gpio-r8a774b1": for R8A774B1 (RZ/G2N) compatible GPIO controller.
     - "renesas,gpio-r8a774c0": for R8A774C0 (RZ/G2E) compatible GPIO controller.
     - "renesas,gpio-r8a7778": for R8A7778 (R-Car M1) compatible GPIO controller.
     - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
Signature · 1 line
2.7.4
#5 lore raw

PATCH 5/8 arm64: dts: renesas: r8a774b1: Add GPIO device nodes

In reply to Lad Prabhakar

From: Biju Das <[email protected]>

commit bbbb919f3286f3bddfe9b23feaf184860d11d0ac upstream.

Add GPIO device nodes to the DT of the r8a774b1 SoC.

---
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 64 +++++++++++++++++++++++++++----
 1 file changed, 56 insertions(+), 8 deletions(-)
arch/arm64/boot/dts/renesas/r8a774b1.dtsi +56 -8
index e6c8cca..641af27 100644
@@ -132,75 +132,123 @@
 		};
 
 		gpio0: gpio at e6050000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
 		};
 
 		gpio1: gpio at e6051000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
 		};
 
 		gpio2: gpio at e6052000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
 		};
 
 		gpio3: gpio at e6053000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
 		};
 
 		gpio4: gpio at e6054000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
 		};
 
 		gpio5: gpio at e6055000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
 		};
 
 		gpio6: gpio at e6055400 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
 		};
 
 		gpio7: gpio at e6055800 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
 		};
 
 		pfc: pin-controller at e6060000 {
Signature · 1 line
2.7.4
#6 lore raw

PATCH 6/8 dt-bindings: net: ravb: Add support for r8a774b1 SoC

In reply to Lad Prabhakar

From: Biju Das <[email protected]>

commit c1d419d00494487b8401b2ac38d7e8e2a4977d9e upstream.

Document RZ/G2N (R8A774B1) SoC bindings.

---
 Documentation/devicetree/bindings/net/renesas,ravb.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/net/renesas,ravb.txt +1 -0
index 9e3d768..886abb9 100644
@@ -17,6 +17,7 @@ Required properties:
 		R-Car Gen2 and RZ/G1 devices.
 
       - "renesas,etheravb-r8a774a1" for the R8A774A1 SoC.
+      - "renesas,etheravb-r8a774b1" for the R8A774B1 SoC.
       - "renesas,etheravb-r8a774c0" for the R8A774C0 SoC.
       - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
       - "renesas,etheravb-r8a7796" for the R8A7796 SoC.
Signature · 1 line
2.7.4
#7 lore raw

PATCH 7/8 arm64: dts: renesas: r8a774b1: Add Ethernet AVB node

In reply to Lad Prabhakar

From: Biju Das <[email protected]>

commit c722d9001ab5586bb5f29d7f79e857a2c892f817 upstream.

This patch adds the SoC specific part of the Ethernet AVB device tree node.

---
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 42 ++++++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/renesas/r8a774b1.dtsi +41 -1
index 641af27..f42f646 100644
@@ -486,8 +486,48 @@
 		};
 
 		avb: ethernet at e6800000 {
+			compatible = "renesas,etheravb-r8a774b1",
+				     "renesas,etheravb-rcar-gen3";
 			reg = <0 0xe6800000 0 0x800>;
-			/* placeholder */
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		can0: can at e6c30000 {
Signature · 1 line
2.7.4
#8 lore raw

PATCH 8/8 arm64: dts: renesas: Add HiHope RZ/G2N sub board support

In reply to Lad Prabhakar

From: Biju Das <[email protected]>

commit 65005e6a5bb4781a6df3edd42c2e1e7a9f85a445 upstream.

The HiHope RZ/G2N sub board sits below the HiHope RZ/G2N main board.

---
 arch/arm64/boot/dts/renesas/Makefile                     |  1 +
 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts | 15 +++++++++++++++
 2 files changed, 16 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
arch/arm64/boot/dts/renesas/Makefile +1 -0
index bfdb3b6..17785e1 100644
@@ -2,6 +2,7 @@
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb
 dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb
arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts new file +15 -0
new file mode 100644
index 0000000..ab47c0b
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N sub board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n",
+		     "renesas,r8a774b1";
+};
Signature · 1 line
2.7.4
#9 lore raw

cover Renesas RZ/G2N extend peripheral support

In reply to Lad Prabhakar

Hi Lad,

Quoted 34 lines

-----Original Message-----
From: Lad Prabhakar [mailto:prabhakar.mahadev-lad.rj at bp.renesas.com]
Sent: Monday, January 27, 2020 11:26 PM
To: cip-dev at lists.cip-project.org; iwamatsu nobuhiro(?? ?? ??? ?????) <[email protected]>; Pavel Machek <[email protected]>
Cc: Chris Paterson <[email protected]>
Subject: [PATCH 4.19.y-cip 0/8] Renesas RZ/G2N extend peripheral support

This patch series adds support for following peripherals supported by RZ/G2N, along with adding support for HiHope RZ/G2N sub board 1: DMAC
2: SCIF/HSCIF
3: GPIO controller
4: Ethernet controller

Biju Das (8):
dt-bindings: dmaengine: rcar-dmac: Document R8A774B1 bindings
arm64: dts: renesas: r8a774b1: Add SYS-DMAC device nodes
arm64: dts: renesas: r8a774b1: Add SCIF and HSCIF nodes
dt-bindings: gpio: rcar: Add DT binding for r8a774b1
arm64: dts: renesas: r8a774b1: Add GPIO device nodes
dt-bindings: net: ravb: Add support for r8a774b1 SoC
arm64: dts: renesas: r8a774b1: Add Ethernet AVB node
arm64: dts: renesas: Add HiHope RZ/G2N sub board support

 .../devicetree/bindings/dma/renesas,rcar-dmac.txt  |   1 +
 .../devicetree/bindings/gpio/renesas,gpio-rcar.txt |   1 +
 .../devicetree/bindings/net/renesas,ravb.txt       |   1 +
 arch/arm64/boot/dts/renesas/Makefile               |   1 +
 .../boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts  |  15 +
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi          | 381
++++++++++++++++++++-
 6 files changed, 389 insertions(+), 11 deletions(-)  create mode 100644
Quoted 2 lines

arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts

I reviewd this series, I have no objection to this. I will apply this if there is no objection from other member.

Best regards,
Nobuhio.

#10 lore raw

cover Renesas RZ/G2N extend peripheral support

Hi!

Quoted 2 lines

I reviewd this series, I have no objection to this. I will apply this if there is no objection from other member.

I did a quick review, and series looks good to me.

Best regards,
Pavel

Signature · 9 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 195 bytes
Desc: not available
URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20200128/3c8e410a/attachment.sig>
#11 lore raw

cover Renesas RZ/G2N extend peripheral support

Hi,

Quoted 11 lines

-----Original Message-----
From: Pavel Machek [mailto:pavel at denx.de]
Sent: Tuesday, January 28, 2020 11:58 PM
To: iwamatsu nobuhiro(?? ?? ????????) <[email protected]>
Cc: prabhakar.mahadev-lad.rj at bp.renesas.com;
cip-dev at lists.cip-project.org; pavel at denx.de; chris.paterson2 at renesas.com
Subject: Re: [PATCH 4.19.y-cip 0/8] Renesas RZ/G2N extend peripheral support

Quoted 6 lines

Hi!

Quoted 2 lines

I reviewd this series, I have no objection to this. I will apply this if there is no objection from other member.

I did a quick review, and series looks good to me.

Thank you, applied.

Best regards,
Nobuhiro