Skip to contentSkip to conversation

xfs: Pass xattr name and value length explicitly to xfs_attr_leaf_newentsize

PATCH Superseded Chandan Rajendra 4 participants 7 messages Jan 29, 2020 – Feb 17, 2020 XFS filesystem

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/2 xfs: Pass xattr name and value length explicitly to xfs_attr_leaf_newentsize

This commit changes xfs_attr_leaf_newentsize() to explicitly accept name and value length instead of a pointer to struct xfs_da_args. The next commit will need to invoke xfs_attr_leaf_newentsize() from functions that do not have a struct xfs_da_args to pass in.

---
 fs/xfs/libxfs/xfs_attr.c      |  3 ++-
 fs/xfs/libxfs/xfs_attr_leaf.c | 41 ++++++++++++++++++++++++-----------
 fs/xfs/libxfs/xfs_attr_leaf.h |  3 ++-
 3 files changed, 32 insertions(+), 15 deletions(-)
fs/xfs/libxfs/xfs_attr.c +2 -1
index 0d7fcc983b3da..1eae1db74f6cd 100644
@@ -199,7 +199,8 @@ xfs_attr_calc_size(
 	 * Determine space new attribute will use, and if it would be
 	 * "local" or "remote" (note: local != inline).
 	 */
-	size = xfs_attr_leaf_newentsize(args, local);
+	size = xfs_attr_leaf_newentsize(mp, args->namelen, args->valuelen,
+					local);
 	nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
 	if (*local) {
 		if (size > (args->geo->blksize / 2)) {
fs/xfs/libxfs/xfs_attr_leaf.c +28 -13

108 lines not on this page · raw message

fs/xfs/libxfs/xfs_attr_leaf.h +2 -1
index f4a188e28b7b6..0ce1f9301157e 100644
@@ -106,7 +106,8 @@ void	xfs_attr3_leaf_unbalance(struct xfs_da_state *state,
 xfs_dahash_t	xfs_attr_leaf_lasthash(struct xfs_buf *bp, int *count);
 int	xfs_attr_leaf_order(struct xfs_buf *leaf1_bp,
 				   struct xfs_buf *leaf2_bp);
-int	xfs_attr_leaf_newentsize(struct xfs_da_args *args, int *local);
+int	xfs_attr_leaf_newentsize(struct xfs_mount *mp, int namelen,
+			int valuelen, int *local);
 int	xfs_attr3_leaf_read(struct xfs_trans *tp, struct xfs_inode *dp,
 			xfs_dablk_t bno, struct xfs_buf **bpp);
 void	xfs_attr3_leaf_hdr_from_disk(struct xfs_da_geometry *geo,
Signature · 1 line
2.19.1
#1 lore raw

PATCH v3 2/2 xfs: Fix log reservation calculation for xattr insert operation

Log space reservation for xattr insert operation can be divided into two parts,
1. Mount time
- Inode
- Superblock for accounting space allocations
- AGF for accounting space used be count, block number, rmapbt and refcnt btrees.

2. The remaining log space can only be calculated at run time because,
- A local xattr can be large enough to cause a double split of the dabtree.
- The value of the xattr can be large enough to be stored in remote blocks. The contents of the remote blocks are not logged.

The log space reservation could be,
- 2 * XFS_DA_NODE_MAXDEPTH number of blocks. Additional XFS_DA_NODE_MAXDEPTH number of blocks are required if xattr is large enough to cause another split of the dabtree path from root to leaf block.
- BMBT blocks for storing (2 * XFS_DA_NODE_MAXDEPTH) record entries. Additional XFS_DA_NODE_MAXDEPTH number of blocks are required in case of a double split of the dabtree path from root to leaf blocks.
- Space for logging blocks of count, block number, rmap and refcnt btrees.

Presently, mount time log reservation includes block count required for a single split of the dabtree. The dabtree block count is also taken into account by xfs_attr_calc_size().

Also, AGF log space reservation isn't accounted for. Hence log reservation calculation for xattr insert operation gives an incorrect value.

Apart from the above, xfs_log_calc_max_attrsetm_res() passes byte count as an argument to XFS_NEXTENTADD_SPACE_RES() instead of block count.

To fix these issues, this commit refactors xfs_attr_calc_size() to calculate,
1. The number of dabtree blocks that need to be logged.
2. The number of remote blocks that need to be allocated.
3. The number of dabtree blocks that need to be allocated.
4. The number of bmbt blocks that need to be allocated.
5. The total number of blocks that need to be allocated.

xfs_attr_set() uses this information to compute number of bytes that needs to be reserved in the log.

This commit also modifies xfs_log_calc_max_attrsetm_res() to invoke xfs_attr_calc_size() to obtain the number of blocks to be logged which it uses to figure out the total number of bytes to be logged.

---
Changelog:
V1 -> V2:
1. Use convenience variables to reduce indentation of code.

V2 -> V3:
1. Introduce 'struct xfs_attr_set_resv' to be used an as out parameter holding xattr reservation values.
2. Calculate number of bmbt blocks and total allocation blocks within xfs_attr_calc_size().

 fs/xfs/libxfs/xfs_attr.c       | 93 +++++++++++++++++++---------------
 fs/xfs/libxfs/xfs_attr.h       | 20 +++++++-
 fs/xfs/libxfs/xfs_log_rlimit.c | 14 ++---
 fs/xfs/libxfs/xfs_trans_resv.c | 52 +++++++++----------
 fs/xfs/libxfs/xfs_trans_resv.h |  2 +
 5 files changed, 107 insertions(+), 74 deletions(-)
fs/xfs/libxfs/xfs_attr.c +53 -40
index 1eae1db74f6cd..1f3b001a1092e 100644
@@ -183,43 +183,6 @@ xfs_attr_get(
 	return 0;
 }
 
-/*
- * Calculate how many blocks we need for the new attribute,
- */
-STATIC int
-xfs_attr_calc_size(
-	struct xfs_da_args	*args,
-	int			*local)
-{
-	struct xfs_mount	*mp = args->dp->i_mount;
-	int			size;
-	int			nblks;
-
-	/*
-	 * Determine space new attribute will use, and if it would be
-	 * "local" or "remote" (note: local != inline).
-	 */
-	size = xfs_attr_leaf_newentsize(mp, args->namelen, args->valuelen,
-					local);
-	nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
-	if (*local) {
-		if (size > (args->geo->blksize / 2)) {
-			/* Double split possible */
-			nblks *= 2;
-		}
-	} else {
-		/*
-		 * Out of line attribute, cannot double split, but
-		 * make room for the attribute value itself.
-		 */
-		uint	dblocks = xfs_attr3_rmt_blocks(mp, args->valuelen);
-		nblks += dblocks;
-		nblks += XFS_NEXTENTADD_SPACE_RES(mp, dblocks, XFS_ATTR_FORK);
-	}
-
-	return nblks;
-}
-
 STATIC int
 xfs_attr_try_sf_addname(
 	struct xfs_inode	*dp,
@@ -248,6 +211,53 @@ xfs_attr_try_sf_addname(
 	return error ? error : error2;
 }
 
+/*
+ * Calculate how many blocks we need for the new attribute,
+ */
+void
+xfs_attr_calc_size(
+	struct xfs_mount		*mp,
+	struct xfs_attr_set_resv	*resv,
+	int				namelen,
+	int				valuelen,
+	int				*local)
+{
+	unsigned int		blksize;
+	int			size;
+
+	blksize = mp->m_dir_geo->blksize;
+
+	/*
+	 * Determine space new attribute will use, and if it would be
+	 * "local" or "remote" (note: local != inline).
+	 */
+	size = xfs_attr_leaf_newentsize(mp, namelen, valuelen, local);
+
+	resv->total_dablks = XFS_DAENTER_BLOCKS(mp, XFS_ATTR_FORK);
+	resv->log_dablks = 2 * resv->total_dablks;
+
+	if (*local) {
+		if (size > (blksize / 2)) {
+			/* Double split possible */
+			resv->log_dablks += resv->total_dablks;
+			resv->total_dablks *= 2;
+		}
+	} else {
+		/*
+		 * Out of line attribute, cannot double split, but
+		 * make room for the attribute value itself.
+		 */
+		resv->rmt_blks = xfs_attr3_rmt_blocks(mp, valuelen);
+	}
+
+	resv->bmbt_blks = XFS_NEXTENTADD_SPACE_RES(mp,
+					resv->total_dablks + resv->rmt_blks,
+					XFS_ATTR_FORK);
+
+	resv->alloc_blks = resv->total_dablks + resv->rmt_blks +
+		resv->bmbt_blks;
+}
+
 /*
  * Set the attribute specified in @args.
  */
@@ -344,6 +354,7 @@ xfs_attr_set(
 	int			flags)
 {
 	struct xfs_mount	*mp = dp->i_mount;
+	struct xfs_attr_set_resv resv = { 0 };
 	struct xfs_da_args	args;
 	struct xfs_trans_res	tres;
 	int			rsvd = (flags & ATTR_ROOT) != 0;
@@ -361,7 +372,10 @@ xfs_attr_set(
 	args.value = value;
 	args.valuelen = valuelen;
 	args.op_flags = XFS_DA_OP_ADDNAME | XFS_DA_OP_OKNOENT;
-	args.total = xfs_attr_calc_size(&args, &local);
+
+	xfs_attr_calc_size(mp, &resv, args.namelen, args.valuelen, &local);
+
+	args.total = resv.alloc_blks;
 
 	error = xfs_qm_dqattach(dp);
 	if (error)
@@ -380,8 +394,7 @@ xfs_attr_set(
 			return error;
 	}
 
-	tres.tr_logres = M_RES(mp)->tr_attrsetm.tr_logres +
-			 M_RES(mp)->tr_attrsetrt.tr_logres * args.total;
+	tres.tr_logres = xfs_calc_attr_res(mp, &resv);
 	tres.tr_logcount = XFS_ATTRSET_LOG_COUNT;
 	tres.tr_logflags = XFS_TRANS_PERM_LOG_RES;
 
fs/xfs/libxfs/xfs_attr.h +19 -1
index 94badfa1743e3..0b42faf7d6a1f 100644
@@ -131,6 +131,22 @@ typedef struct xfs_attr_list_context {
 	int				index;		/* index into output buffer */
 } xfs_attr_list_context_t;
 
+struct xfs_attr_set_resv {
+	/* Number of blocks in the da btree that we might need to log. */
+	unsigned int		log_dablks;
+
+	/* Number of unlogged blocks needed to store the remote attr value. */
+	unsigned int		rmt_blks;
+
+	/* Number of blocks to allocate for the da btree. */
+	unsigned int		total_dablks;
+
+	/* Blocks we might need to create all the new attr fork mappings. */
+	unsigned int		bmbt_blks;
+
+	/* Total number of blocks we might have to allocate. */
+	unsigned int		alloc_blks;
+};
 
 /*========================================================================
  * Function prototypes for the kernel.
@@ -154,5 +170,7 @@ int xfs_attr_remove_args(struct xfs_da_args *args);
 int xfs_attr_list(struct xfs_inode *dp, char *buffer, int bufsize,
 		  int flags, struct attrlist_cursor_kern *cursor);
 bool xfs_attr_namecheck(const void *name, size_t length);
-
+void xfs_attr_calc_size(struct xfs_mount *mp,
+			struct xfs_attr_set_resv *resv,
+			int namelen, int valuelen, int *local);
 #endif	/* __XFS_ATTR_H__ */
fs/xfs/libxfs/xfs_log_rlimit.c +7 -7
index 7f55eb3f36536..26566c25c7e2c 100644
@@ -10,6 +10,7 @@
 #include "xfs_log_format.h"
 #include "xfs_trans_resv.h"
 #include "xfs_mount.h"
+#include "xfs_attr.h"
 #include "xfs_da_format.h"
 #include "xfs_trans_space.h"
 #include "xfs_da_btree.h"
@@ -23,17 +24,16 @@ STATIC int
 xfs_log_calc_max_attrsetm_res(
 	struct xfs_mount	*mp)
 {
-	int			size;
-	int			nblks;
+	struct xfs_attr_set_resv resv = { 0 };
+	int		size;
+	int		local;
 
 	size = xfs_attr_leaf_entsize_local_max(mp->m_attr_geo->blksize) -
 	       MAXNAMELEN - 1;
-	nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
-	nblks += XFS_B_TO_FSB(mp, size);
-	nblks += XFS_NEXTENTADD_SPACE_RES(mp, size, XFS_ATTR_FORK);
+	xfs_attr_calc_size(mp, &resv, size, 0, &local);
+	ASSERT(local == 1);
 
-	return  M_RES(mp)->tr_attrsetm.tr_logres +
-		M_RES(mp)->tr_attrsetrt.tr_logres * nblks;
+	return xfs_calc_attr_res(mp, &resv);
 }
 
 /*
fs/xfs/libxfs/xfs_trans_resv.c +26 -26

84 lines not on this page · raw message

fs/xfs/libxfs/xfs_trans_resv.h +2 -0
index 7241ab28cf84f..3a6a0bf21e9b1 100644
@@ -7,6 +7,7 @@
 #define	__XFS_TRANS_RESV_H__
 
 struct xfs_mount;
+struct xfs_attr_set_resv;
 
 /*
  * structure for maintaining pre-calculated transaction reservations.
@@ -91,6 +92,7 @@ struct xfs_trans_resv {
 #define	XFS_ATTRSET_LOG_COUNT		3
 #define	XFS_ATTRRM_LOG_COUNT		3
 
+uint xfs_calc_attr_res(struct xfs_mount *mp, struct xfs_attr_set_resv *resv);
 void xfs_trans_resv_calc(struct xfs_mount *mp, struct xfs_trans_resv *resp);
 uint xfs_allocfree_log_count(struct xfs_mount *mp, uint num_ops);
 
Signature · 1 line
2.19.1
#2 lore raw

Re: [PATCH V3 2/2] xfs: Fix log reservation calculation for xattr insert operation

Quoted 69 lines · Chandan Rajendra

Log space reservation for xattr insert operation can be divided into two parts,
1. Mount time
- Inode
- Superblock for accounting space allocations
- AGF for accounting space used be count, block number, rmapbt and refcnt btrees.

2. The remaining log space can only be calculated at run time because,
- A local xattr can be large enough to cause a double split of the dabtree.
- The value of the xattr can be large enough to be stored in remote blocks. The contents of the remote blocks are not logged.

The log space reservation could be,
- 2 * XFS_DA_NODE_MAXDEPTH number of blocks. Additional XFS_DA_NODE_MAXDEPTH number of blocks are required if xattr is large enough to cause another split of the dabtree path from root to leaf block.
- BMBT blocks for storing (2 * XFS_DA_NODE_MAXDEPTH) record entries. Additional XFS_DA_NODE_MAXDEPTH number of blocks are required in case of a double split of the dabtree path from root to leaf blocks.
- Space for logging blocks of count, block number, rmap and refcnt btrees.

Presently, mount time log reservation includes block count required for a single split of the dabtree. The dabtree block count is also taken into account by xfs_attr_calc_size().

Also, AGF log space reservation isn't accounted for. Hence log reservation calculation for xattr insert operation gives an incorrect value.

Apart from the above, xfs_log_calc_max_attrsetm_res() passes byte count as an argument to XFS_NEXTENTADD_SPACE_RES() instead of block count.

To fix these issues, this commit refactors xfs_attr_calc_size() to calculate,
1. The number of dabtree blocks that need to be logged.
2. The number of remote blocks that need to be allocated.
3. The number of dabtree blocks that need to be allocated.
4. The number of bmbt blocks that need to be allocated.
5. The total number of blocks that need to be allocated.

xfs_attr_set() uses this information to compute number of bytes that needs to be reserved in the log.

This commit also modifies xfs_log_calc_max_attrsetm_res() to invoke xfs_attr_calc_size() to obtain the number of blocks to be logged which it uses to figure out the total number of bytes to be logged.

---
Changelog:
V1 -> V2:
1. Use convenience variables to reduce indentation of code.

V2 -> V3:
1. Introduce 'struct xfs_attr_set_resv' to be used an as out parameter holding xattr reservation values.
2. Calculate number of bmbt blocks and total allocation blocks within xfs_attr_calc_size().

 fs/xfs/libxfs/xfs_attr.c       | 93 +++++++++++++++++++---------------
 fs/xfs/libxfs/xfs_attr.h       | 20 +++++++-
 fs/xfs/libxfs/xfs_log_rlimit.c | 14 ++---
 fs/xfs/libxfs/xfs_trans_resv.c | 52 +++++++++----------
 fs/xfs/libxfs/xfs_trans_resv.h |  2 +
 5 files changed, 107 insertions(+), 74 deletions(-)
fs/xfs/libxfs/xfs_attr.c +0 -0
index 1eae1db74f6cd..1f3b001a1092e 100644

...

Quoted 19 lines
fs/xfs/libxfs/xfs_attr.c +15 -0
@@ -248,6 +211,53 @@ xfs_attr_try_sf_addname(
 	return error ? error : error2;
 }
 
+/*
+ * Calculate how many blocks we need for the new attribute,
+ */
+void
+xfs_attr_calc_size(
+	struct xfs_mount		*mp,
+	struct xfs_attr_set_resv	*resv,
+	int				namelen,
+	int				valuelen,
+	int				*local)
+{
+	unsigned int		blksize;
+	int			size;
+
+	blksize = mp->m_dir_geo->blksize;

fs/xfs/libxfs/xfs_attr.c xfs_attr_try_sf_addname( · line 238

Quoted 10 lines
fs/xfs/libxfs/xfs_attr.c +10 -0
+
+	/*
+	 * Determine space new attribute will use, and if it would be
+	 * "local" or "remote" (note: local != inline).
+	 */
+	size = xfs_attr_leaf_newentsize(mp, namelen, valuelen, local);
+
+	resv->total_dablks = XFS_DAENTER_BLOCKS(mp, XFS_ATTR_FORK);
+	resv->log_dablks = 2 * resv->total_dablks;
+

It looks like this changes the setxattr transaction reservation calculation at the same time as refactoring how the reservation is calculated, which makes it hard to even identify what is changing. Can you split the general refactoring and calculation changes into independent patches? E.g., refactor the existing calculation first and then subsequently fix up the calculation..?

Brian

Quoted 243 lines
fs/xfs/libxfs/xfs_attr.c +28 -3
+	if (*local) {
+		if (size > (blksize / 2)) {
+			/* Double split possible */
+			resv->log_dablks += resv->total_dablks;
+			resv->total_dablks *= 2;
+		}
+	} else {
+		/*
+		 * Out of line attribute, cannot double split, but
+		 * make room for the attribute value itself.
+		 */
+		resv->rmt_blks = xfs_attr3_rmt_blocks(mp, valuelen);
+	}
+
+	resv->bmbt_blks = XFS_NEXTENTADD_SPACE_RES(mp,
+					resv->total_dablks + resv->rmt_blks,
+					XFS_ATTR_FORK);
+
+	resv->alloc_blks = resv->total_dablks + resv->rmt_blks +
+		resv->bmbt_blks;
+}
+
 /*
  * Set the attribute specified in @args.
  */
@@ -344,6 +354,7 @@ xfs_attr_set(
 	int			flags)
 {
 	struct xfs_mount	*mp = dp->i_mount;
+	struct xfs_attr_set_resv resv = { 0 };
 	struct xfs_da_args	args;
 	struct xfs_trans_res	tres;
 	int			rsvd = (flags & ATTR_ROOT) != 0;
@@ -361,7 +372,10 @@ xfs_attr_set(
 	args.value = value;
 	args.valuelen = valuelen;
 	args.op_flags = XFS_DA_OP_ADDNAME | XFS_DA_OP_OKNOENT;
-	args.total = xfs_attr_calc_size(&args, &local);
+
+	xfs_attr_calc_size(mp, &resv, args.namelen, args.valuelen, &local);
+
+	args.total = resv.alloc_blks;
 
 	error = xfs_qm_dqattach(dp);
 	if (error)
@@ -380,8 +394,7 @@ xfs_attr_set(
 			return error;
 	}
 
-	tres.tr_logres = M_RES(mp)->tr_attrsetm.tr_logres +
-			 M_RES(mp)->tr_attrsetrt.tr_logres * args.total;
+	tres.tr_logres = xfs_calc_attr_res(mp, &resv);
 	tres.tr_logcount = XFS_ATTRSET_LOG_COUNT;
 	tres.tr_logflags = XFS_TRANS_PERM_LOG_RES;
 
fs/xfs/libxfs/xfs_attr.h +19 -1
index 94badfa1743e3..0b42faf7d6a1f 100644
@@ -131,6 +131,22 @@ typedef struct xfs_attr_list_context {
 	int				index;		/* index into output buffer */
 } xfs_attr_list_context_t;
 
+struct xfs_attr_set_resv {
+	/* Number of blocks in the da btree that we might need to log. */
+	unsigned int		log_dablks;
+
+	/* Number of unlogged blocks needed to store the remote attr value. */
+	unsigned int		rmt_blks;
+
+	/* Number of blocks to allocate for the da btree. */
+	unsigned int		total_dablks;
+
+	/* Blocks we might need to create all the new attr fork mappings. */
+	unsigned int		bmbt_blks;
+
+	/* Total number of blocks we might have to allocate. */
+	unsigned int		alloc_blks;
+};
 
 /*========================================================================
  * Function prototypes for the kernel.
@@ -154,5 +170,7 @@ int xfs_attr_remove_args(struct xfs_da_args *args);
 int xfs_attr_list(struct xfs_inode *dp, char *buffer, int bufsize,
 		  int flags, struct attrlist_cursor_kern *cursor);
 bool xfs_attr_namecheck(const void *name, size_t length);
-
+void xfs_attr_calc_size(struct xfs_mount *mp,
+			struct xfs_attr_set_resv *resv,
+			int namelen, int valuelen, int *local);
 #endif	/* __XFS_ATTR_H__ */
fs/xfs/libxfs/xfs_log_rlimit.c +7 -7
index 7f55eb3f36536..26566c25c7e2c 100644
@@ -10,6 +10,7 @@
 #include "xfs_log_format.h"
 #include "xfs_trans_resv.h"
 #include "xfs_mount.h"
+#include "xfs_attr.h"
 #include "xfs_da_format.h"
 #include "xfs_trans_space.h"
 #include "xfs_da_btree.h"
@@ -23,17 +24,16 @@ STATIC int
 xfs_log_calc_max_attrsetm_res(
 	struct xfs_mount	*mp)
 {
-	int			size;
-	int			nblks;
+	struct xfs_attr_set_resv resv = { 0 };
+	int		size;
+	int		local;
 
 	size = xfs_attr_leaf_entsize_local_max(mp->m_attr_geo->blksize) -
 	       MAXNAMELEN - 1;
-	nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
-	nblks += XFS_B_TO_FSB(mp, size);
-	nblks += XFS_NEXTENTADD_SPACE_RES(mp, size, XFS_ATTR_FORK);
+	xfs_attr_calc_size(mp, &resv, size, 0, &local);
+	ASSERT(local == 1);
 
-	return  M_RES(mp)->tr_attrsetm.tr_logres +
-		M_RES(mp)->tr_attrsetrt.tr_logres * nblks;
+	return xfs_calc_attr_res(mp, &resv);
 }
 
 /*
fs/xfs/libxfs/xfs_trans_resv.c +26 -26
index 824073a839acb..867f1954c49bc 100644
@@ -19,6 +19,7 @@
 #include "xfs_trans.h"
 #include "xfs_qm.h"
 #include "xfs_trans_space.h"
+#include "xfs_attr.h"
 
 #define _ALLOC	true
 #define _FREE	false
@@ -701,12 +702,10 @@ xfs_calc_attrinval_reservation(
  * Setting an attribute at mount time.
  *	the inode getting the attribute
  *	the superblock for allocations
- *	the agfs extents are allocated from
- *	the attribute btree * max depth
- *	the inode allocation btree
+ *	the agf extents are allocated from
  * Since attribute transaction space is dependent on the size of the attribute,
  * the calculation is done partially at mount time and partially at runtime(see
- * below).
+ * xfs_attr_calc_size()).
  */
 STATIC uint
 xfs_calc_attrsetm_reservation(
@@ -714,27 +713,7 @@ xfs_calc_attrsetm_reservation(
 {
 	return XFS_DQUOT_LOGRES(mp) +
 		xfs_calc_inode_res(mp, 1) +
-		xfs_calc_buf_res(1, mp->m_sb.sb_sectsize) +
-		xfs_calc_buf_res(XFS_DA_NODE_MAXDEPTH, XFS_FSB_TO_B(mp, 1));
-}
-
-/*
- * Setting an attribute at runtime, transaction space unit per block.
- * 	the superblock for allocations: sector size
- *	the inode bmap btree could join or split: max depth * block size
- * Since the runtime attribute transaction space is dependent on the total
- * blocks needed for the 1st bmap, here we calculate out the space unit for
- * one block so that the caller could figure out the total space according
- * to the attibute extent length in blocks by:
- *	ext * M_RES(mp)->tr_attrsetrt.tr_logres
- */
-STATIC uint
-xfs_calc_attrsetrt_reservation(
-	struct xfs_mount	*mp)
-{
-	return xfs_calc_buf_res(1, mp->m_sb.sb_sectsize) +
-		xfs_calc_buf_res(XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK),
-				 XFS_FSB_TO_B(mp, 1));
+		xfs_calc_buf_res(2, mp->m_sb.sb_sectsize);
 }
 
 /*
@@ -832,6 +811,27 @@ xfs_calc_sb_reservation(
 	return xfs_calc_buf_res(1, mp->m_sb.sb_sectsize);
 }
 
+uint
+xfs_calc_attr_res(
+	struct xfs_mount		*mp,
+	struct xfs_attr_set_resv	*resv)
+{
+	unsigned int		space_blks;
+	unsigned int		attr_res;
+
+	space_blks = xfs_allocfree_log_count(mp,
+			resv->total_dablks + resv->bmbt_blks);
+
+	attr_res = M_RES(mp)->tr_attrsetm.tr_logres +
+		xfs_calc_buf_res(resv->log_dablks,
+				mp->m_attr_geo->blksize) +
+		xfs_calc_buf_res(resv->bmbt_blks,
+				mp->m_sb.sb_blocksize) +
+		xfs_calc_buf_res(space_blks, mp->m_sb.sb_blocksize);
+
+	return attr_res;
+}
+
 void
 xfs_trans_resv_calc(
 	struct xfs_mount	*mp,
@@ -942,7 +942,7 @@ xfs_trans_resv_calc(
 	resp->tr_ichange.tr_logres = xfs_calc_ichange_reservation(mp);
 	resp->tr_fsyncts.tr_logres = xfs_calc_swrite_reservation(mp);
 	resp->tr_writeid.tr_logres = xfs_calc_writeid_reservation(mp);
-	resp->tr_attrsetrt.tr_logres = xfs_calc_attrsetrt_reservation(mp);
+	resp->tr_attrsetrt.tr_logres = 0;
 	resp->tr_clearagi.tr_logres = xfs_calc_clear_agi_bucket_reservation(mp);
 	resp->tr_growrtzero.tr_logres = xfs_calc_growrtzero_reservation(mp);
 	resp->tr_growrtfree.tr_logres = xfs_calc_growrtfree_reservation(mp);
fs/xfs/libxfs/xfs_trans_resv.h +2 -0
index 7241ab28cf84f..3a6a0bf21e9b1 100644
@@ -7,6 +7,7 @@
 #define	__XFS_TRANS_RESV_H__
 
 struct xfs_mount;
+struct xfs_attr_set_resv;
 
 /*
  * structure for maintaining pre-calculated transaction reservations.
@@ -91,6 +92,7 @@ struct xfs_trans_resv {
 #define	XFS_ATTRSET_LOG_COUNT		3
 #define	XFS_ATTRRM_LOG_COUNT		3
 
+uint xfs_calc_attr_res(struct xfs_mount *mp, struct xfs_attr_set_resv *resv);
 void xfs_trans_resv_calc(struct xfs_mount *mp, struct xfs_trans_resv *resp);
 uint xfs_allocfree_log_count(struct xfs_mount *mp, uint num_ops);
 
Signature · 1 line
2.19.1
#3 lore raw

Re: [PATCH V3 2/2] xfs: Fix log reservation calculation for xattr insert operation

Quoted 99 lines · Brian Foster
Quoted 69 lines · Chandan Rajendra

Log space reservation for xattr insert operation can be divided into two parts,
1. Mount time
- Inode
- Superblock for accounting space allocations
- AGF for accounting space used be count, block number, rmapbt and refcnt btrees.

2. The remaining log space can only be calculated at run time because,
- A local xattr can be large enough to cause a double split of the dabtree.
- The value of the xattr can be large enough to be stored in remote blocks. The contents of the remote blocks are not logged.

The log space reservation could be,
- 2 * XFS_DA_NODE_MAXDEPTH number of blocks. Additional XFS_DA_NODE_MAXDEPTH number of blocks are required if xattr is large enough to cause another split of the dabtree path from root to leaf block.
- BMBT blocks for storing (2 * XFS_DA_NODE_MAXDEPTH) record entries. Additional XFS_DA_NODE_MAXDEPTH number of blocks are required in case of a double split of the dabtree path from root to leaf blocks.
- Space for logging blocks of count, block number, rmap and refcnt btrees.

Presently, mount time log reservation includes block count required for a single split of the dabtree. The dabtree block count is also taken into account by xfs_attr_calc_size().

Also, AGF log space reservation isn't accounted for. Hence log reservation calculation for xattr insert operation gives an incorrect value.

Apart from the above, xfs_log_calc_max_attrsetm_res() passes byte count as an argument to XFS_NEXTENTADD_SPACE_RES() instead of block count.

To fix these issues, this commit refactors xfs_attr_calc_size() to calculate,
1. The number of dabtree blocks that need to be logged.
2. The number of remote blocks that need to be allocated.
3. The number of dabtree blocks that need to be allocated.
4. The number of bmbt blocks that need to be allocated.
5. The total number of blocks that need to be allocated.

xfs_attr_set() uses this information to compute number of bytes that needs to be reserved in the log.

This commit also modifies xfs_log_calc_max_attrsetm_res() to invoke xfs_attr_calc_size() to obtain the number of blocks to be logged which it uses to figure out the total number of bytes to be logged.

---
Changelog:
V1 -> V2:
1. Use convenience variables to reduce indentation of code.

V2 -> V3:
1. Introduce 'struct xfs_attr_set_resv' to be used an as out parameter holding xattr reservation values.
2. Calculate number of bmbt blocks and total allocation blocks within xfs_attr_calc_size().

 fs/xfs/libxfs/xfs_attr.c       | 93 +++++++++++++++++++---------------
 fs/xfs/libxfs/xfs_attr.h       | 20 +++++++-
 fs/xfs/libxfs/xfs_log_rlimit.c | 14 ++---
 fs/xfs/libxfs/xfs_trans_resv.c | 52 +++++++++----------
 fs/xfs/libxfs/xfs_trans_resv.h |  2 +
 5 files changed, 107 insertions(+), 74 deletions(-)
fs/xfs/libxfs/xfs_attr.c +0 -0
index 1eae1db74f6cd..1f3b001a1092e 100644

...

Quoted 28 lines
fs/xfs/libxfs/xfs_attr.c +24 -0
@@ -248,6 +211,53 @@ xfs_attr_try_sf_addname(
 	return error ? error : error2;
 }
 
+/*
+ * Calculate how many blocks we need for the new attribute,
+ */
+void
+xfs_attr_calc_size(
+	struct xfs_mount		*mp,
+	struct xfs_attr_set_resv	*resv,
+	int				namelen,
+	int				valuelen,
+	int				*local)
+{
+	unsigned int		blksize;
+	int			size;
+
+	blksize = mp->m_dir_geo->blksize;
+
+	/*
+	 * Determine space new attribute will use, and if it would be
+	 * "local" or "remote" (note: local != inline).
+	 */
+	size = xfs_attr_leaf_newentsize(mp, namelen, valuelen, local);
+
+	resv->total_dablks = XFS_DAENTER_BLOCKS(mp, XFS_ATTR_FORK);
+	resv->log_dablks = 2 * resv->total_dablks;
Quoted 8 lines

fs/xfs/libxfs/xfs_attr.c xfs_attr_try_sf_addname( · line 238

Quoted 1 line
fs/xfs/libxfs/xfs_attr.c +1 -0
+

It looks like this changes the setxattr transaction reservation calculation at the same time as refactoring how the reservation is calculated, which makes it hard to even identify what is changing. Can you split the general refactoring and calculation changes into independent patches? E.g., refactor the existing calculation first and then subsequently fix up the calculation..?

Sure.

I will also rebase my patches on top of Christoph's "Clean attr interface" patchset and post the next version.

Signature · 1 line
chandan
#4 lore raw

Re: [PATCH V3 2/2] xfs: Fix log reservation calculation for xattr insert operation

In reply to Chandan Rajendra
Quoted 122 lines · Chandan Rajendra

Log space reservation for xattr insert operation can be divided into two parts,
1. Mount time
- Inode
- Superblock for accounting space allocations
- AGF for accounting space used be count, block number, rmapbt and refcnt btrees.

2. The remaining log space can only be calculated at run time because,
- A local xattr can be large enough to cause a double split of the dabtree.
- The value of the xattr can be large enough to be stored in remote blocks. The contents of the remote blocks are not logged.

The log space reservation could be,
- 2 * XFS_DA_NODE_MAXDEPTH number of blocks. Additional XFS_DA_NODE_MAXDEPTH number of blocks are required if xattr is large enough to cause another split of the dabtree path from root to leaf block.
- BMBT blocks for storing (2 * XFS_DA_NODE_MAXDEPTH) record entries. Additional XFS_DA_NODE_MAXDEPTH number of blocks are required in case of a double split of the dabtree path from root to leaf blocks.
- Space for logging blocks of count, block number, rmap and refcnt btrees.

Presently, mount time log reservation includes block count required for a single split of the dabtree. The dabtree block count is also taken into account by xfs_attr_calc_size().

Also, AGF log space reservation isn't accounted for. Hence log reservation calculation for xattr insert operation gives an incorrect value.

Apart from the above, xfs_log_calc_max_attrsetm_res() passes byte count as an argument to XFS_NEXTENTADD_SPACE_RES() instead of block count.

To fix these issues, this commit refactors xfs_attr_calc_size() to calculate,
1. The number of dabtree blocks that need to be logged.
2. The number of remote blocks that need to be allocated.
3. The number of dabtree blocks that need to be allocated.
4. The number of bmbt blocks that need to be allocated.
5. The total number of blocks that need to be allocated.

xfs_attr_set() uses this information to compute number of bytes that needs to be reserved in the log.

This commit also modifies xfs_log_calc_max_attrsetm_res() to invoke xfs_attr_calc_size() to obtain the number of blocks to be logged which it uses to figure out the total number of bytes to be logged.

---
Changelog:
V1 -> V2:
1. Use convenience variables to reduce indentation of code.

V2 -> V3:
1. Introduce 'struct xfs_attr_set_resv' to be used an as out parameter holding xattr reservation values.
2. Calculate number of bmbt blocks and total allocation blocks within xfs_attr_calc_size().

 fs/xfs/libxfs/xfs_attr.c       | 93 +++++++++++++++++++---------------
 fs/xfs/libxfs/xfs_attr.h       | 20 +++++++-
 fs/xfs/libxfs/xfs_log_rlimit.c | 14 ++---
 fs/xfs/libxfs/xfs_trans_resv.c | 52 +++++++++----------
 fs/xfs/libxfs/xfs_trans_resv.h |  2 +
 5 files changed, 107 insertions(+), 74 deletions(-)
fs/xfs/libxfs/xfs_attr.c +5 -37
index 1eae1db74f6cd..1f3b001a1092e 100644
@@ -183,43 +183,6 @@ xfs_attr_get(
 	return 0;
 }
 
-/*
- * Calculate how many blocks we need for the new attribute,
- */
-STATIC int
-xfs_attr_calc_size(
-	struct xfs_da_args	*args,
-	int			*local)
-{
-	struct xfs_mount	*mp = args->dp->i_mount;
-	int			size;
-	int			nblks;
-
-	/*
-	 * Determine space new attribute will use, and if it would be
-	 * "local" or "remote" (note: local != inline).
-	 */
-	size = xfs_attr_leaf_newentsize(mp, args->namelen, args->valuelen,
-					local);
-	nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
-	if (*local) {
-		if (size > (args->geo->blksize / 2)) {
-			/* Double split possible */
-			nblks *= 2;
-		}
-	} else {
-		/*
-		 * Out of line attribute, cannot double split, but
-		 * make room for the attribute value itself.
-		 */
-		uint	dblocks = xfs_attr3_rmt_blocks(mp, args->valuelen);
-		nblks += dblocks;
-		nblks += XFS_NEXTENTADD_SPACE_RES(mp, dblocks, XFS_ATTR_FORK);
-	}
-
-	return nblks;
-}
-
 STATIC int
 xfs_attr_try_sf_addname(
 	struct xfs_inode	*dp,
@@ -248,6 +211,53 @@ xfs_attr_try_sf_addname(
 	return error ? error : error2;
 }
 
+/*
+ * Calculate how many blocks we need for the new attribute,
+ */
+void
+xfs_attr_calc_size(

fs/xfs/libxfs/xfs_attr.c xfs_attr_try_sf_addname( · line 228

Quoted 10 lines
fs/xfs/libxfs/xfs_attr.c +10 -0
+	struct xfs_mount		*mp,
+	struct xfs_attr_set_resv	*resv,
+	int				namelen,
+	int				valuelen,
+	int				*local)
+{
+	unsigned int		blksize;
+	int			size;
+
+	blksize = mp->m_dir_geo->blksize;

This could be streamlined a bit:

	unsigned int			blksize = mp->m_attr_geo->blksize;
	int				size;

and indented to match the argument list.

Also please note that I changed m_dir_geo to m_attr_geo; this is the attribute fork, not a directory.

Quoted 5 lines
fs/xfs/libxfs/xfs_attr.c +5 -0
+	/*
+	 * Determine space new attribute will use, and if it would be
+	 * "local" or "remote" (note: local != inline).
+	 */
+	size = xfs_attr_leaf_newentsize(mp, namelen, valuelen, local);

fs/xfs/libxfs/xfs_attr.c xfs_attr_try_sf_addname( · line 244

Quoted 10 lines
fs/xfs/libxfs/xfs_attr.c +10 -0
+
+	resv->total_dablks = XFS_DAENTER_BLOCKS(mp, XFS_ATTR_FORK);
+	resv->log_dablks = 2 * resv->total_dablks;
+
+	if (*local) {
+		if (size > (blksize / 2)) {
+			/* Double split possible */
+			resv->log_dablks += resv->total_dablks;
+			resv->total_dablks *= 2;
+		}

I think this code block should set rmt_blks = 0 so that this function always returns a fully initialized resv structure, and then you can skip the "= { 0 };" stuff below.

Quoted 4 lines
fs/xfs/libxfs/xfs_attr.c +4 -0
+	} else {
+		/*
+		 * Out of line attribute, cannot double split, but
+		 * make room for the attribute value itself.

fs/xfs/libxfs/xfs_attr.c xfs_attr_try_sf_addname( · line 258

Quoted 10 lines
fs/xfs/libxfs/xfs_attr.c +10 -0
+		 */
+		resv->rmt_blks = xfs_attr3_rmt_blocks(mp, valuelen);
+	}
+
+	resv->bmbt_blks = XFS_NEXTENTADD_SPACE_RES(mp,
+					resv->total_dablks + resv->rmt_blks,
+					XFS_ATTR_FORK);
+
+	resv->alloc_blks = resv->total_dablks + resv->rmt_blks +
+		resv->bmbt_blks;

Please fix the nth-line indentation to be consistent with (most of) the rest of xfs here:

	resv->bmbt_blks = XFS_NEXTENTADD_SPACE_RES(mp,
			resv->total_dablks + resv->rmt_blks,
			XFS_ATTR_FORK);

	resv->alloc_blks = resv->total_dablks + resv->rmt_blks +
			resv->bmbt_blks;
Quoted 41 lines
fs/xfs/libxfs/xfs_attr.c +8 -3
+}
+
 /*
  * Set the attribute specified in @args.
  */
@@ -344,6 +354,7 @@ xfs_attr_set(
 	int			flags)
 {
 	struct xfs_mount	*mp = dp->i_mount;
+	struct xfs_attr_set_resv resv = { 0 };
 	struct xfs_da_args	args;
 	struct xfs_trans_res	tres;
 	int			rsvd = (flags & ATTR_ROOT) != 0;
@@ -361,7 +372,10 @@ xfs_attr_set(
 	args.value = value;
 	args.valuelen = valuelen;
 	args.op_flags = XFS_DA_OP_ADDNAME | XFS_DA_OP_OKNOENT;
-	args.total = xfs_attr_calc_size(&args, &local);
+
+	xfs_attr_calc_size(mp, &resv, args.namelen, args.valuelen, &local);
+
+	args.total = resv.alloc_blks;
 
 	error = xfs_qm_dqattach(dp);
 	if (error)
@@ -380,8 +394,7 @@ xfs_attr_set(
 			return error;
 	}
 
-	tres.tr_logres = M_RES(mp)->tr_attrsetm.tr_logres +
-			 M_RES(mp)->tr_attrsetrt.tr_logres * args.total;
+	tres.tr_logres = xfs_calc_attr_res(mp, &resv);
 	tres.tr_logcount = XFS_ATTRSET_LOG_COUNT;
 	tres.tr_logflags = XFS_TRANS_PERM_LOG_RES;
 
fs/xfs/libxfs/xfs_attr.h +0 -0
index 94badfa1743e3..0b42faf7d6a1f 100644
@@ -131,6 +131,22 @@ typedef struct xfs_attr_list_context {
 	int				index;		/* index into output buffer */

fs/xfs/libxfs/xfs_attr.h typedef struct xfs_attr_list_context { · line 141

Quoted 10 lines
fs/xfs/libxfs/xfs_attr.h +8 -0
 } xfs_attr_list_context_t;
 
+struct xfs_attr_set_resv {
+	/* Number of blocks in the da btree that we might need to log. */
+	unsigned int		log_dablks;
+
+	/* Number of unlogged blocks needed to store the remote attr value. */
+	unsigned int		rmt_blks;
+
+	/* Number of blocks to allocate for the da btree. */

This comment ought to read "Number of filesystem blocks..." so that people (er... me) won't mistakenly think that total_dablks is in units of da blocks.

Granted that might just be me overcomplicating things since da blocks == fs blocks for every attr tree ever.

Quoted 113 lines
fs/xfs/libxfs/xfs_attr.h +11 -1
+	unsigned int		total_dablks;
+
+	/* Blocks we might need to create all the new attr fork mappings. */
+	unsigned int		bmbt_blks;
+
+	/* Total number of blocks we might have to allocate. */
+	unsigned int		alloc_blks;
+};
 
 /*========================================================================
  * Function prototypes for the kernel.
@@ -154,5 +170,7 @@ int xfs_attr_remove_args(struct xfs_da_args *args);
 int xfs_attr_list(struct xfs_inode *dp, char *buffer, int bufsize,
 		  int flags, struct attrlist_cursor_kern *cursor);
 bool xfs_attr_namecheck(const void *name, size_t length);
-
+void xfs_attr_calc_size(struct xfs_mount *mp,
+			struct xfs_attr_set_resv *resv,
+			int namelen, int valuelen, int *local);
 #endif	/* __XFS_ATTR_H__ */
fs/xfs/libxfs/xfs_log_rlimit.c +7 -7
index 7f55eb3f36536..26566c25c7e2c 100644
@@ -10,6 +10,7 @@
 #include "xfs_log_format.h"
 #include "xfs_trans_resv.h"
 #include "xfs_mount.h"
+#include "xfs_attr.h"
 #include "xfs_da_format.h"
 #include "xfs_trans_space.h"
 #include "xfs_da_btree.h"
@@ -23,17 +24,16 @@ STATIC int
 xfs_log_calc_max_attrsetm_res(
 	struct xfs_mount	*mp)
 {
-	int			size;
-	int			nblks;
+	struct xfs_attr_set_resv resv = { 0 };
+	int		size;
+	int		local;
 
 	size = xfs_attr_leaf_entsize_local_max(mp->m_attr_geo->blksize) -
 	       MAXNAMELEN - 1;
-	nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
-	nblks += XFS_B_TO_FSB(mp, size);
-	nblks += XFS_NEXTENTADD_SPACE_RES(mp, size, XFS_ATTR_FORK);
+	xfs_attr_calc_size(mp, &resv, size, 0, &local);
+	ASSERT(local == 1);
 
-	return  M_RES(mp)->tr_attrsetm.tr_logres +
-		M_RES(mp)->tr_attrsetrt.tr_logres * nblks;
+	return xfs_calc_attr_res(mp, &resv);
 }
 
 /*
fs/xfs/libxfs/xfs_trans_resv.c +4 -25
index 824073a839acb..867f1954c49bc 100644
@@ -19,6 +19,7 @@
 #include "xfs_trans.h"
 #include "xfs_qm.h"
 #include "xfs_trans_space.h"
+#include "xfs_attr.h"
 
 #define _ALLOC	true
 #define _FREE	false
@@ -701,12 +702,10 @@ xfs_calc_attrinval_reservation(
  * Setting an attribute at mount time.
  *	the inode getting the attribute
  *	the superblock for allocations
- *	the agfs extents are allocated from
- *	the attribute btree * max depth
- *	the inode allocation btree
+ *	the agf extents are allocated from
  * Since attribute transaction space is dependent on the size of the attribute,
  * the calculation is done partially at mount time and partially at runtime(see
- * below).
+ * xfs_attr_calc_size()).
  */
 STATIC uint
 xfs_calc_attrsetm_reservation(
@@ -714,27 +713,7 @@ xfs_calc_attrsetm_reservation(
 {
 	return XFS_DQUOT_LOGRES(mp) +
 		xfs_calc_inode_res(mp, 1) +
-		xfs_calc_buf_res(1, mp->m_sb.sb_sectsize) +
-		xfs_calc_buf_res(XFS_DA_NODE_MAXDEPTH, XFS_FSB_TO_B(mp, 1));
-}
-
-/*
- * Setting an attribute at runtime, transaction space unit per block.
- * 	the superblock for allocations: sector size
- *	the inode bmap btree could join or split: max depth * block size
- * Since the runtime attribute transaction space is dependent on the total
- * blocks needed for the 1st bmap, here we calculate out the space unit for
- * one block so that the caller could figure out the total space according
- * to the attibute extent length in blocks by:
- *	ext * M_RES(mp)->tr_attrsetrt.tr_logres
- */
-STATIC uint
-xfs_calc_attrsetrt_reservation(
-	struct xfs_mount	*mp)
-{
-	return xfs_calc_buf_res(1, mp->m_sb.sb_sectsize) +
-		xfs_calc_buf_res(XFS_BM_MAXLEVELS(mp, XFS_ATTR_FORK),
-				 XFS_FSB_TO_B(mp, 1));
+		xfs_calc_buf_res(2, mp->m_sb.sb_sectsize);
 }
 
 /*

fs/xfs/libxfs/xfs_trans_resv.c xfs_calc_sb_reservation( · line 820

Quoted 10 lines
fs/xfs/libxfs/xfs_trans_resv.c +7 -0
@@ -832,6 +811,27 @@ xfs_calc_sb_reservation(
 	return xfs_calc_buf_res(1, mp->m_sb.sb_sectsize);
 }
 
+uint
+xfs_calc_attr_res(
+	struct xfs_mount		*mp,
+	struct xfs_attr_set_resv	*resv)
+{
+	unsigned int		space_blks;
+	unsigned int		attr_res;

Same complaint from above about the names not lining up here...

fs/xfs/libxfs/xfs_trans_resv.c xfs_calc_sb_reservation( · line 830

Quoted 10 lines
fs/xfs/libxfs/xfs_trans_resv.c +10 -0
+
+	space_blks = xfs_allocfree_log_count(mp,
+			resv->total_dablks + resv->bmbt_blks);
+
+	attr_res = M_RES(mp)->tr_attrsetm.tr_logres +
+		xfs_calc_buf_res(resv->log_dablks,
+				mp->m_attr_geo->blksize) +
+		xfs_calc_buf_res(resv->bmbt_blks,
+				mp->m_sb.sb_blocksize) +
+		xfs_calc_buf_res(space_blks, mp->m_sb.sb_blocksize);

Each of the xfs_calc_buf_res() calls will fit on a single line, right?

--D

Quoted 39 lines
fs/xfs/libxfs/xfs_trans_resv.c +5 -1
+
+	return attr_res;
+}
+
 void
 xfs_trans_resv_calc(
 	struct xfs_mount	*mp,
@@ -942,7 +942,7 @@ xfs_trans_resv_calc(
 	resp->tr_ichange.tr_logres = xfs_calc_ichange_reservation(mp);
 	resp->tr_fsyncts.tr_logres = xfs_calc_swrite_reservation(mp);
 	resp->tr_writeid.tr_logres = xfs_calc_writeid_reservation(mp);
-	resp->tr_attrsetrt.tr_logres = xfs_calc_attrsetrt_reservation(mp);
+	resp->tr_attrsetrt.tr_logres = 0;
 	resp->tr_clearagi.tr_logres = xfs_calc_clear_agi_bucket_reservation(mp);
 	resp->tr_growrtzero.tr_logres = xfs_calc_growrtzero_reservation(mp);
 	resp->tr_growrtfree.tr_logres = xfs_calc_growrtfree_reservation(mp);
fs/xfs/libxfs/xfs_trans_resv.h +2 -0
index 7241ab28cf84f..3a6a0bf21e9b1 100644
@@ -7,6 +7,7 @@
 #define	__XFS_TRANS_RESV_H__
 
 struct xfs_mount;
+struct xfs_attr_set_resv;
 
 /*
  * structure for maintaining pre-calculated transaction reservations.
@@ -91,6 +92,7 @@ struct xfs_trans_resv {
 #define	XFS_ATTRSET_LOG_COUNT		3
 #define	XFS_ATTRRM_LOG_COUNT		3
 
+uint xfs_calc_attr_res(struct xfs_mount *mp, struct xfs_attr_set_resv *resv);
 void xfs_trans_resv_calc(struct xfs_mount *mp, struct xfs_trans_resv *resp);
 uint xfs_allocfree_log_count(struct xfs_mount *mp, uint num_ops);
 
Signature · 1 line
2.19.1
#5 lore raw
In reply to Chandan Rajendra
Quoted 12 lines · Chandan Rajendra

This commit changes xfs_attr_leaf_newentsize() to explicitly accept name and value length instead of a pointer to struct xfs_da_args. The next commit will need to invoke xfs_attr_leaf_newentsize() from functions that do not have a struct xfs_da_args to pass in.

---
 fs/xfs/libxfs/xfs_attr.c      |  3 ++-
 fs/xfs/libxfs/xfs_attr_leaf.c | 41 ++++++++++++++++++++++++-----------
 fs/xfs/libxfs/xfs_attr_leaf.h |  3 ++-
 3 files changed, 32 insertions(+), 15 deletions(-)

...

Quoted 4 lines
fs/xfs/libxfs/xfs_attr_leaf.c +0 -0
index 08d4b10ae2d53..7cd57e5844d80 100644

...

fs/xfs/libxfs/xfs_attr_leaf.c xfs_attr_leaf_entsize(xfs_attr_leafblock_t *leaf, int index) · line 2703

Quoted 6 lines
fs/xfs/libxfs/xfs_attr_leaf.c +1 -1
@@ -2687,20 +2700,22 @@ xfs_attr_leaf_entsize(xfs_attr_leafblock_t *leaf, int index)
  */
 int
 xfs_attr_leaf_newentsize(
-	struct xfs_da_args	*args,
+	struct xfs_mount	*mp,

Any reason not to just pass the geo here rather than the mount? Otherwise looks fine to me.

Brian

Quoted 38 lines
fs/xfs/libxfs/xfs_attr_leaf.c +5 -3
+	int			namelen,
+	int			valuelen,
 	int			*local)
 {
 	int			size;
 
-	size = xfs_attr_leaf_entsize_local(args->namelen, args->valuelen);
-	if (size < xfs_attr_leaf_entsize_local_max(args->geo->blksize)) {
+	size = xfs_attr_leaf_entsize_local(namelen, valuelen);
+	if (size < xfs_attr_leaf_entsize_local_max(mp->m_attr_geo->blksize)) {
 		if (local)
 			*local = 1;
 		return size;
 	}
 	if (local)
 		*local = 0;
-	return xfs_attr_leaf_entsize_remote(args->namelen);
+	return xfs_attr_leaf_entsize_remote(namelen);
 }
 
 
fs/xfs/libxfs/xfs_attr_leaf.h +2 -1
index f4a188e28b7b6..0ce1f9301157e 100644
@@ -106,7 +106,8 @@ void	xfs_attr3_leaf_unbalance(struct xfs_da_state *state,
 xfs_dahash_t	xfs_attr_leaf_lasthash(struct xfs_buf *bp, int *count);
 int	xfs_attr_leaf_order(struct xfs_buf *leaf1_bp,
 				   struct xfs_buf *leaf2_bp);
-int	xfs_attr_leaf_newentsize(struct xfs_da_args *args, int *local);
+int	xfs_attr_leaf_newentsize(struct xfs_mount *mp, int namelen,
+			int valuelen, int *local);
 int	xfs_attr3_leaf_read(struct xfs_trans *tp, struct xfs_inode *dp,
 			xfs_dablk_t bno, struct xfs_buf **bpp);
 void	xfs_attr3_leaf_hdr_from_disk(struct xfs_da_geometry *geo,
Signature · 1 line
2.19.1
#6 lore raw
Quoted 19 lines · Brian Foster
Quoted 12 lines · Chandan Rajendra

This commit changes xfs_attr_leaf_newentsize() to explicitly accept name and value length instead of a pointer to struct xfs_da_args. The next commit will need to invoke xfs_attr_leaf_newentsize() from functions that do not have a struct xfs_da_args to pass in.

---
 fs/xfs/libxfs/xfs_attr.c      |  3 ++-
 fs/xfs/libxfs/xfs_attr_leaf.c | 41 ++++++++++++++++++++++++-----------
 fs/xfs/libxfs/xfs_attr_leaf.h |  3 ++-
 3 files changed, 32 insertions(+), 15 deletions(-)

...

Quoted 4 lines
fs/xfs/libxfs/xfs_attr_leaf.c +0 -0
index 08d4b10ae2d53..7cd57e5844d80 100644

...

Quoted 9 lines

fs/xfs/libxfs/xfs_attr_leaf.c xfs_attr_leaf_entsize(xfs_attr_leafblock_t *leaf, int index) · line 2703

Quoted 6 lines
fs/xfs/libxfs/xfs_attr_leaf.c +1 -1
@@ -2687,20 +2700,22 @@ xfs_attr_leaf_entsize(xfs_attr_leafblock_t *leaf, int index)
  */
 int
 xfs_attr_leaf_newentsize(
-	struct xfs_da_args	*args,
+	struct xfs_mount	*mp,

Any reason not to just pass the geo here rather than the mount? Otherwise looks fine to me.

Sorry, I noticed this message now.

You are right. I will change the first argument to be attr geometry pointer.

Signature · 1 line
chandan