Skip to contentSkip to conversation

Refactor Gen11+ SAGV support

PATCH Superseded Stanislav Lisovskiy 2 participants 12 messages Feb 3, 2020 – Feb 4, 2020

Subsystems (3)

v14 of 30 Superseded Latest is v30 →

lore
Share & tools
lore
#0 lore raw

v14 cover Refactor Gen11+ SAGV support

For Gen11+ platforms BSpec suggests disabling specific QGV points separately, depending on bandwidth limitations and current display configuration. Thus it required adding a new PCode request for disabling QGV points and some refactoring of already existing SAGV code.
Also had to refactor intel_can_enable_sagv function, as current seems to be outdated and using skl specific workarounds, also not following BSpec for Gen11+.

Stanislav Lisovskiy (7):
drm/i915: Start passing latency as parameter
drm/i915: Introduce skl_plane_wm_level accessor.
drm/i915: Init obj state in intel_atomic_get_old/new_global_obj_state drm/i915: Refactor intel_can_enable_sagv
drm/i915: Added required new PCode commands
drm/i915: Restrict qgv points which don't have enough bandwidth. drm/i915: Enable SAGV support for Gen12

 drivers/gpu/drm/i915/display/intel_bw.c       | 193 ++++--
 drivers/gpu/drm/i915/display/intel_bw.h       |  24 +
 drivers/gpu/drm/i915/display/intel_display.c  | 131 +++-
 .../drm/i915/display/intel_display_types.h    |   8 +
 .../gpu/drm/i915/display/intel_global_state.c |  30 +-
 drivers/gpu/drm/i915/i915_drv.h               |   3 +
 drivers/gpu/drm/i915/i915_reg.h               |   4 +
 drivers/gpu/drm/i915/intel_pm.c               | 562 +++++++++++++++---
 drivers/gpu/drm/i915/intel_pm.h               |   4 +-
 drivers/gpu/drm/i915/intel_sideband.c         |   2 +
 10 files changed, 814 insertions(+), 147 deletions(-)
Signature · 6 lines
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v14 1/7 drm/i915: Start passing latency as parameter

We need to start passing memory latency as a parameter when calculating plane wm levels, as latency can get changed in different circumstances(for example with or without SAGV). So we need to be more flexible on that matter.

---
 drivers/gpu/drm/i915/intel_pm.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +8 -4
index a2d2407af2ed..01a152dc9774 100644
@@ -3936,6 +3936,7 @@ static int skl_compute_wm_params(const struct intel_crtc_state *crtc_state,
 				 int color_plane);
 static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
 				 int level,
+				 u32 latency,
 				 const struct skl_wm_params *wp,
 				 const struct skl_wm_level *result_prev,
 				 struct skl_wm_level *result /* out */);
@@ -3958,7 +3959,9 @@ skl_cursor_allocation(const struct intel_crtc_state *crtc_state,
 	drm_WARN_ON(&dev_priv->drm, ret);
 
 	for (level = 0; level <= max_level; level++) {
-		skl_compute_plane_wm(crtc_state, level, &wp, &wm, &wm);
+		u32 latency = dev_priv->wm.skl_latency[level];
+
+		skl_compute_plane_wm(crtc_state, level, latency, &wp, &wm, &wm);
 		if (wm.min_ddb_alloc == U16_MAX)
 			break;
 
@@ -4657,12 +4660,12 @@ static bool skl_wm_has_lines(struct drm_i915_private *dev_priv, int level)
 
 static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
 				 int level,
+				 u32 latency,
 				 const struct skl_wm_params *wp,
 				 const struct skl_wm_level *result_prev,
 				 struct skl_wm_level *result /* out */)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
-	u32 latency = dev_priv->wm.skl_latency[level];
 	uint_fixed_16_16_t method1, method2;
 	uint_fixed_16_16_t selected_result;
 	u32 res_blocks, res_lines, min_ddb_alloc = 0;
@@ -4791,9 +4794,10 @@ skl_compute_wm_levels(const struct intel_crtc_state *crtc_state,
 
 	for (level = 0; level <= max_level; level++) {
 		struct skl_wm_level *result = &levels[level];
+		u32 latency = dev_priv->wm.skl_latency[level];
 
-		skl_compute_plane_wm(crtc_state, level, wm_params,
-				     result_prev, result);
+		skl_compute_plane_wm(crtc_state, level, latency,
+				     wm_params, result_prev, result);
 
 		result_prev = result;
 	}
Signature · 6 lines
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH v14 2/7 drm/i915: Introduce skl_plane_wm_level accessor.

In reply to Stanislav Lisovskiy

For future Gen12 SAGV implementation we need to seemlessly alter wm levels calculated, depending on whether we are allowed to enable SAGV or not.

So this accessor will give additional flexibility to do that.

Currently this accessor is still simply working as "pass-through" function. This will be changed in next coming patches from this series.

v2: - plane_id -> plane->id(Ville Syrjälä)
- Moved wm_level var to have more local scope (Ville Syrjälä)
- Renamed yuv to color_plane(Ville Syrjälä) in skl_plane_wm_level

---
 drivers/gpu/drm/i915/intel_pm.c | 120 +++++++++++++++++++++-----------
 1 file changed, 81 insertions(+), 39 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +81 -39
index 01a152dc9774..b5043ccd159b 100644
@@ -4226,6 +4226,18 @@ icl_get_total_relative_data_rate(struct intel_crtc_state *crtc_state,
 	return total_data_rate;
 }
 
+static const struct skl_wm_level *
+skl_plane_wm_level(struct intel_plane *plane,
+		   const struct intel_crtc_state *crtc_state,
+		   int level,
+		   int color_plane)
+{
+	const struct skl_plane_wm *wm =
+		&crtc_state->wm.skl.optimal.planes[plane->id];
+
+	return color_plane ? &wm->uv_wm[level] : &wm->wm[level];
+}
+
 static int
 skl_allocate_pipe_ddb(struct intel_crtc_state *crtc_state,
 		      struct skl_ddb_allocation *ddb /* out */)
@@ -4239,7 +4251,7 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *crtc_state,
 	u16 total[I915_MAX_PLANES] = {};
 	u16 uv_total[I915_MAX_PLANES] = {};
 	u64 total_data_rate;
-	enum plane_id plane_id;
+	struct intel_plane *plane;
 	int num_active;
 	u64 plane_data_rate[I915_MAX_PLANES] = {};
 	u64 uv_plane_data_rate[I915_MAX_PLANES] = {};
@@ -4291,22 +4303,28 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *crtc_state,
 	 */
 	for (level = ilk_wm_max_level(dev_priv); level >= 0; level--) {
 		blocks = 0;
-		for_each_plane_id_on_crtc(intel_crtc, plane_id) {
-			const struct skl_plane_wm *wm =
-				&crtc_state->wm.skl.optimal.planes[plane_id];
 
-			if (plane_id == PLANE_CURSOR) {
-				if (wm->wm[level].min_ddb_alloc > total[PLANE_CURSOR]) {
+		for_each_intel_plane_on_crtc(&dev_priv->drm, intel_crtc, plane) {
+			const struct skl_wm_level *wm_level;
+			const struct skl_wm_level *wm_uv_level;
+
+			wm_level = skl_plane_wm_level(plane, crtc_state,
+						      level, false);
+			wm_uv_level = skl_plane_wm_level(plane, crtc_state,
+							 level, true);
+
+			if (plane->id == PLANE_CURSOR) {
+				if (wm_level->min_ddb_alloc > total[PLANE_CURSOR]) {
 					drm_WARN_ON(&dev_priv->drm,
-						    wm->wm[level].min_ddb_alloc != U16_MAX);
+						    wm_level->min_ddb_alloc != U16_MAX);
 					blocks = U32_MAX;
 					break;
 				}
 				continue;
 			}
 
-			blocks += wm->wm[level].min_ddb_alloc;
-			blocks += wm->uv_wm[level].min_ddb_alloc;
+			blocks += wm_level->min_ddb_alloc;
+			blocks += wm_uv_level->min_ddb_alloc;
 		}
 
 		if (blocks <= alloc_size) {
@@ -4328,13 +4346,18 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *crtc_state,
 	 * watermark level, plus an extra share of the leftover blocks
 	 * proportional to its relative data rate.
 	 */
-	for_each_plane_id_on_crtc(intel_crtc, plane_id) {
-		const struct skl_plane_wm *wm =
-			&crtc_state->wm.skl.optimal.planes[plane_id];
+	for_each_intel_plane_on_crtc(&dev_priv->drm, intel_crtc, plane) {
+		const struct skl_wm_level *wm_level;
+		const struct skl_wm_level *wm_uv_level;
 		u64 rate;
 		u16 extra;
 
-		if (plane_id == PLANE_CURSOR)
+		wm_level = skl_plane_wm_level(plane, crtc_state,
+					      level, false);
+		wm_uv_level = skl_plane_wm_level(plane, crtc_state,
+						 level, true);
+
+		if (plane->id == PLANE_CURSOR)
 			continue;
 
 		/*
@@ -4344,22 +4367,22 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *crtc_state,
 		if (total_data_rate == 0)
 			break;
 
-		rate = plane_data_rate[plane_id];
+		rate = plane_data_rate[plane->id];
 		extra = min_t(u16, alloc_size,
 			      DIV64_U64_ROUND_UP(alloc_size * rate,
 						 total_data_rate));
-		total[plane_id] = wm->wm[level].min_ddb_alloc + extra;
+		total[plane->id] = wm_level->min_ddb_alloc + extra;
 		alloc_size -= extra;
 		total_data_rate -= rate;
 
 		if (total_data_rate == 0)
 			break;
 
-		rate = uv_plane_data_rate[plane_id];
+		rate = uv_plane_data_rate[plane->id];
 		extra = min_t(u16, alloc_size,
 			      DIV64_U64_ROUND_UP(alloc_size * rate,
 						 total_data_rate));
-		uv_total[plane_id] = wm->uv_wm[level].min_ddb_alloc + extra;
+		uv_total[plane->id] = wm_uv_level->min_ddb_alloc + extra;
 		alloc_size -= extra;
 		total_data_rate -= rate;
 	}
@@ -4367,29 +4390,29 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *crtc_state,
 
 	/* Set the actual DDB start/end points for each plane */
 	start = alloc->start;
-	for_each_plane_id_on_crtc(intel_crtc, plane_id) {
+	for_each_intel_plane_on_crtc(&dev_priv->drm, intel_crtc, plane) {
 		struct skl_ddb_entry *plane_alloc =
-			&crtc_state->wm.skl.plane_ddb_y[plane_id];
+			&crtc_state->wm.skl.plane_ddb_y[plane->id];
 		struct skl_ddb_entry *uv_plane_alloc =
-			&crtc_state->wm.skl.plane_ddb_uv[plane_id];
+			&crtc_state->wm.skl.plane_ddb_uv[plane->id];
 
-		if (plane_id == PLANE_CURSOR)
+		if (plane->id == PLANE_CURSOR)
 			continue;
 
 		/* Gen11+ uses a separate plane for UV watermarks */
 		drm_WARN_ON(&dev_priv->drm,
-			    INTEL_GEN(dev_priv) >= 11 && uv_total[plane_id]);
+			    INTEL_GEN(dev_priv) >= 11 && uv_total[plane->id]);
 
 		/* Leave disabled planes at (0,0) */
-		if (total[plane_id]) {
+		if (total[plane->id]) {
 			plane_alloc->start = start;
-			start += total[plane_id];
+			start += total[plane->id];
 			plane_alloc->end = start;
 		}
 
-		if (uv_total[plane_id]) {
+		if (uv_total[plane->id]) {
 			uv_plane_alloc->start = start;
-			start += uv_total[plane_id];
+			start += uv_total[plane->id];
 			uv_plane_alloc->end = start;
 		}
 	}
@@ -4401,9 +4424,16 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *crtc_state,
 	 * that aren't actually possible.
 	 */
 	for (level++; level <= ilk_wm_max_level(dev_priv); level++) {
-		for_each_plane_id_on_crtc(intel_crtc, plane_id) {
+		for_each_intel_plane_on_crtc(&dev_priv->drm, intel_crtc, plane) {
+			const struct skl_wm_level *wm_level;
+			const struct skl_wm_level *wm_uv_level;
 			struct skl_plane_wm *wm =
-				&crtc_state->wm.skl.optimal.planes[plane_id];
+				&crtc_state->wm.skl.optimal.planes[plane->id];
+
+			wm_level = skl_plane_wm_level(plane, crtc_state,
+						      level, false);
+			wm_uv_level = skl_plane_wm_level(plane, crtc_state,
+							 level, true);
 
 			/*
 			 * We only disable the watermarks for each plane if
@@ -4417,9 +4447,10 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *crtc_state,
 			 *  planes must be enabled before the level will be used."
 			 * So this is actually safe to do.
 			 */
-			if (wm->wm[level].min_ddb_alloc > total[plane_id] ||
-			    wm->uv_wm[level].min_ddb_alloc > uv_total[plane_id])
-				memset(&wm->wm[level], 0, sizeof(wm->wm[level]));
+			if (wm_level->min_ddb_alloc > total[plane->id] ||
+			    wm_uv_level->min_ddb_alloc > uv_total[plane->id])
+				memset(&wm->wm[level], 0,
+				       sizeof(struct skl_wm_level));
 
 			/*
 			 * Wa_1408961008:icl, ehl
@@ -4427,9 +4458,14 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *crtc_state,
 			 */
 			if (IS_GEN(dev_priv, 11) &&
 			    level == 1 && wm->wm[0].plane_en) {
-				wm->wm[level].plane_res_b = wm->wm[0].plane_res_b;
-				wm->wm[level].plane_res_l = wm->wm[0].plane_res_l;
-				wm->wm[level].ignore_lines = wm->wm[0].ignore_lines;
+				wm_level = skl_plane_wm_level(plane, crtc_state,
+							      0, false);
+				wm->wm[level].plane_res_b =
+					wm_level->plane_res_b;
+				wm->wm[level].plane_res_l =
+					wm_level->plane_res_l;
+				wm->wm[level].ignore_lines =
+					wm_level->ignore_lines;
 			}
 		}
 	}
@@ -4438,11 +4474,11 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *crtc_state,
 	 * Go back and disable the transition watermark if it turns out we
 	 * don't have enough DDB blocks for it.
 	 */
-	for_each_plane_id_on_crtc(intel_crtc, plane_id) {
+	for_each_intel_plane_on_crtc(&dev_priv->drm, intel_crtc, plane) {
 		struct skl_plane_wm *wm =
-			&crtc_state->wm.skl.optimal.planes[plane_id];
+			&crtc_state->wm.skl.optimal.planes[plane->id];
 
-		if (wm->trans_wm.plane_res_b >= total[plane_id])
+		if (wm->trans_wm.plane_res_b >= total[plane->id])
 			memset(&wm->trans_wm, 0, sizeof(wm->trans_wm));
 	}
 
@@ -5033,10 +5069,13 @@ void skl_write_plane_wm(struct intel_plane *plane,
 		&crtc_state->wm.skl.plane_ddb_y[plane_id];
 	const struct skl_ddb_entry *ddb_uv =
 		&crtc_state->wm.skl.plane_ddb_uv[plane_id];
+	const struct skl_wm_level *wm_level;
 
 	for (level = 0; level <= max_level; level++) {
+		wm_level = skl_plane_wm_level(plane, crtc_state, level, false);
+
 		skl_write_wm_level(dev_priv, PLANE_WM(pipe, plane_id, level),
-				   &wm->wm[level]);
+				   wm_level);
 	}
 	skl_write_wm_level(dev_priv, PLANE_WM_TRANS(pipe, plane_id),
 			   &wm->trans_wm);
@@ -5067,10 +5106,13 @@ void skl_write_cursor_wm(struct intel_plane *plane,
 		&crtc_state->wm.skl.optimal.planes[plane_id];
 	const struct skl_ddb_entry *ddb =
 		&crtc_state->wm.skl.plane_ddb_y[plane_id];
+	const struct skl_wm_level *wm_level;
 
 	for (level = 0; level <= max_level; level++) {
+		wm_level = skl_plane_wm_level(plane, crtc_state, level, false);
+
 		skl_write_wm_level(dev_priv, CUR_WM(pipe, level),
-				   &wm->wm[level]);
+				   wm_level);
 	}
 	skl_write_wm_level(dev_priv, CUR_WM_TRANS(pipe), &wm->trans_wm);
 
Signature · 6 lines
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH v14 3/7 drm/i915: Init obj state in intel_atomic_get_old/new_global_obj_state

In reply to Stanislav Lisovskiy

We might be willing to call intel_atomic_get_old_global_obj_state
and intel_atomic_get_new_global_obj_state right away, however
those are not initializing global obj state as intel_atomic_get_global_obj_state does.
Extracted initializing part to separate function and now using this
also in intel_atomic_get_old_global_obj_state and intel_atomic_get_new_global_obj_state

---
 drivers/gpu/drm/i915/display/intel_bw.c       | 28 ++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_bw.h       |  9 ++++++
 .../gpu/drm/i915/display/intel_global_state.c | 30 +++++++++++++------
 3 files changed, 57 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/display/intel_bw.c +27 -1
index 26fa94329eda..c0168dfe8884 100644
@@ -373,7 +373,33 @@ static unsigned int intel_bw_data_rate(struct drm_i915_private *dev_priv,
 	return data_rate;
 }
 
-static struct intel_bw_state *
+struct intel_bw_state *
+intel_atomic_get_old_bw_state(struct intel_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	struct intel_global_state *bw_state;
+
+	bw_state = intel_atomic_get_global_obj_state(state, &dev_priv->bw_obj);
+	if (IS_ERR(bw_state))
+		return ERR_CAST(bw_state);
+
+	return to_intel_bw_state(bw_state);
+}
+
+struct intel_bw_state *
+intel_atomic_get_new_bw_state(struct intel_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	struct intel_global_state *bw_state;
+	bw_state = intel_atomic_get_new_global_obj_state(state, &dev_priv->bw_obj);
+
+	if (IS_ERR(bw_state))
+		return ERR_CAST(bw_state);
+
+	return to_intel_bw_state(bw_state);
+}
+
+struct intel_bw_state *
 intel_atomic_get_bw_state(struct intel_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
drivers/gpu/drm/i915/display/intel_bw.h +9 -0
index a8aa7624c5aa..ac004d6f4276 100644
@@ -24,6 +24,15 @@ struct intel_bw_state {
 
 #define to_intel_bw_state(x) container_of((x), struct intel_bw_state, base)
 
+struct intel_bw_state *
+intel_atomic_get_old_bw_state(struct intel_atomic_state *state);
+
+struct intel_bw_state *
+intel_atomic_get_new_bw_state(struct intel_atomic_state *state);
+
+struct intel_bw_state *
+intel_atomic_get_bw_state(struct intel_atomic_state *state);
+
 void intel_bw_init_hw(struct drm_i915_private *dev_priv);
 int intel_bw_init(struct drm_i915_private *dev_priv);
 int intel_bw_atomic_check(struct intel_atomic_state *state);
drivers/gpu/drm/i915/display/intel_global_state.c +21 -9
index a0cc894c3868..89e85048329f 100644
@@ -67,19 +67,15 @@ static void assert_global_state_read_locked(struct intel_atomic_state *state)
 	WARN(1, "Global state not read locked\n");
 }
 
-struct intel_global_state *
-intel_atomic_get_global_obj_state(struct intel_atomic_state *state,
+static struct intel_global_state *
+_intel_atomic_init_global_obj_state(struct intel_atomic_state *state,
 				  struct intel_global_obj *obj)
 {
-	int index, num_objs, i;
+	int index, num_objs;
 	size_t size;
 	struct __intel_global_objs_state *arr;
 	struct intel_global_state *obj_state;
 
-	for (i = 0; i < state->num_global_objs; i++)
-		if (obj == state->global_objs[i].ptr)
-			return state->global_objs[i].state;
-
 	assert_global_state_read_locked(state);
 
 	num_objs = state->num_global_objs + 1;
@@ -112,6 +108,20 @@ intel_atomic_get_global_obj_state(struct intel_atomic_state *state,
 	return obj_state;
 }
 
+
+struct intel_global_state *
+intel_atomic_get_global_obj_state(struct intel_atomic_state *state,
+				  struct intel_global_obj *obj)
+{
+	int i;
+
+	for (i = 0; i < state->num_global_objs; i++)
+		if (obj == state->global_objs[i].ptr)
+			return state->global_objs[i].state;
+
+	return _intel_atomic_init_global_obj_state(state, obj);
+}
+
 struct intel_global_state *
 intel_atomic_get_old_global_obj_state(struct intel_atomic_state *state,
 				      struct intel_global_obj *obj)
@@ -122,7 +132,9 @@ intel_atomic_get_old_global_obj_state(struct intel_atomic_state *state,
 		if (obj == state->global_objs[i].ptr)
 			return state->global_objs[i].old_state;
 
-	return NULL;
+	_intel_atomic_init_global_obj_state(state, obj);
+
+	return obj->state;
 }
 
 struct intel_global_state *
@@ -135,7 +147,7 @@ intel_atomic_get_new_global_obj_state(struct intel_atomic_state *state,
 		if (obj == state->global_objs[i].ptr)
 			return state->global_objs[i].new_state;
 
-	return NULL;
+	return _intel_atomic_init_global_obj_state(state, obj);
 }
 
 void intel_atomic_swap_global_state(struct intel_atomic_state *state)
Signature · 6 lines
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH v14 3/7 drm/i915: Init obj state in intel_atomic_get_old/new_global_obj_state

We might be willing to call intel_atomic_get_old_global_obj_state
and intel_atomic_get_new_global_obj_state right away, however
those are not initializing global obj state as intel_atomic_get_global_obj_state does.
Extracted initializing part to separate function and now using this
also in intel_atomic_get_old_global_obj_state and intel_atomic_get_new_global_obj_state

v2: - Fixed typo in function call

---
 drivers/gpu/drm/i915/display/intel_bw.c       | 28 ++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_bw.h       |  9 ++++++
 .../gpu/drm/i915/display/intel_global_state.c | 30 +++++++++++++------
 3 files changed, 57 insertions(+), 10 deletions(-)
drivers/gpu/drm/i915/display/intel_bw.c +27 -1
index 26fa94329eda..f48b5c74cc3b 100644
@@ -373,7 +373,33 @@ static unsigned int intel_bw_data_rate(struct drm_i915_private *dev_priv,
 	return data_rate;
 }
 
-static struct intel_bw_state *
+struct intel_bw_state *
+intel_atomic_get_old_bw_state(struct intel_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	struct intel_global_state *bw_state;
+
+	bw_state = intel_atomic_get_old_global_obj_state(state, &dev_priv->bw_obj);
+	if (IS_ERR(bw_state))
+		return ERR_CAST(bw_state);
+
+	return to_intel_bw_state(bw_state);
+}
+
+struct intel_bw_state *
+intel_atomic_get_new_bw_state(struct intel_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	struct intel_global_state *bw_state;
+	bw_state = intel_atomic_get_new_global_obj_state(state, &dev_priv->bw_obj);
+
+	if (IS_ERR(bw_state))
+		return ERR_CAST(bw_state);
+
+	return to_intel_bw_state(bw_state);
+}
+
+struct intel_bw_state *
 intel_atomic_get_bw_state(struct intel_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
drivers/gpu/drm/i915/display/intel_bw.h +9 -0
index a8aa7624c5aa..ac004d6f4276 100644
@@ -24,6 +24,15 @@ struct intel_bw_state {
 
 #define to_intel_bw_state(x) container_of((x), struct intel_bw_state, base)
 
+struct intel_bw_state *
+intel_atomic_get_old_bw_state(struct intel_atomic_state *state);
+
+struct intel_bw_state *
+intel_atomic_get_new_bw_state(struct intel_atomic_state *state);
+
+struct intel_bw_state *
+intel_atomic_get_bw_state(struct intel_atomic_state *state);
+
 void intel_bw_init_hw(struct drm_i915_private *dev_priv);
 int intel_bw_init(struct drm_i915_private *dev_priv);
 int intel_bw_atomic_check(struct intel_atomic_state *state);
drivers/gpu/drm/i915/display/intel_global_state.c +21 -9
index a0cc894c3868..89e85048329f 100644
@@ -67,19 +67,15 @@ static void assert_global_state_read_locked(struct intel_atomic_state *state)
 	WARN(1, "Global state not read locked\n");
 }
 
-struct intel_global_state *
-intel_atomic_get_global_obj_state(struct intel_atomic_state *state,
+static struct intel_global_state *
+_intel_atomic_init_global_obj_state(struct intel_atomic_state *state,
 				  struct intel_global_obj *obj)
 {
-	int index, num_objs, i;
+	int index, num_objs;
 	size_t size;
 	struct __intel_global_objs_state *arr;
 	struct intel_global_state *obj_state;
 
-	for (i = 0; i < state->num_global_objs; i++)
-		if (obj == state->global_objs[i].ptr)
-			return state->global_objs[i].state;
-
 	assert_global_state_read_locked(state);
 
 	num_objs = state->num_global_objs + 1;
@@ -112,6 +108,20 @@ intel_atomic_get_global_obj_state(struct intel_atomic_state *state,
 	return obj_state;
 }
 
+
+struct intel_global_state *
+intel_atomic_get_global_obj_state(struct intel_atomic_state *state,
+				  struct intel_global_obj *obj)
+{
+	int i;
+
+	for (i = 0; i < state->num_global_objs; i++)
+		if (obj == state->global_objs[i].ptr)
+			return state->global_objs[i].state;
+
+	return _intel_atomic_init_global_obj_state(state, obj);
+}
+
 struct intel_global_state *
 intel_atomic_get_old_global_obj_state(struct intel_atomic_state *state,
 				      struct intel_global_obj *obj)
@@ -122,7 +132,9 @@ intel_atomic_get_old_global_obj_state(struct intel_atomic_state *state,
 		if (obj == state->global_objs[i].ptr)
 			return state->global_objs[i].old_state;
 
-	return NULL;
+	_intel_atomic_init_global_obj_state(state, obj);
+
+	return obj->state;
 }
 
 struct intel_global_state *
@@ -135,7 +147,7 @@ intel_atomic_get_new_global_obj_state(struct intel_atomic_state *state,
 		if (obj == state->global_objs[i].ptr)
 			return state->global_objs[i].new_state;
 
-	return NULL;
+	return _intel_atomic_init_global_obj_state(state, obj);
 }
 
 void intel_atomic_swap_global_state(struct intel_atomic_state *state)
Signature · 6 lines
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

PATCH v14 4/7 drm/i915: Refactor intel_can_enable_sagv

In reply to Stanislav Lisovskiy

Currently intel_can_enable_sagv function contains a mix of workarounds for different platforms some of them are not valid for gens >= 11 already, so lets split it into separate functions.

v2:
- Rework watermark calculation algorithm to
attempt to calculate Level 0 watermark
with added sagv block time latency and
check if it fits in DBuf in order to
determine if SAGV can be enabled already
at this stage, just as BSpec 49325 states.
if that fails rollback to usual Level 0
latency and disable SAGV.
- Remove unneeded tabs(James Ausmus)

v3: Rebased the patch

v4: - Added back interlaced check for Gen12 and
added separate function for TGL SAGV check
(thanks to James Ausmus for spotting)
- Removed unneeded gen check
- Extracted Gen12 SAGV decision making code
to a separate function from skl_compute_wm

v5: - Added SAGV global state to dev_priv, because
we need to track all pipes, not only those in atomic state. Each pipe has now correspondent bit mask reflecting, whether it can tolerate SAGV or not(thanks to Ville Syrjala for suggestions).
- Now using active flag instead of enable in crc usage check.

v6: - Fixed rebase conflicts

v7: - kms_cursor_legacy seems to get broken because of multiple memcpy
calls when copying level 0 water marks for enabled SAGV, to fix this now simply using that field right away, without copying, for that introduced a new wm_level accessor which decides which wm_level to return based on SAGV state.

v8: - Protect crtc_sagv_mask same way as we do for other global state
changes: i.e check if changes are needed, then grab all crtc locks to serialize the changes(Ville Syrjälä)
- Add crtc_sagv_mask caching in order to avoid needless recalculations (Matthew Roper)
- Put back Gen12 SAGV switch in order to get it enabled in separate patch(Matthew Roper)
- Rename *_set_sagv_mask to *_compute_sagv_mask(Matthew Roper)
- Check if there are no active pipes in intel_can_enable_sagv instead of platform specific functions(Matthew Roper), same for intel_has_sagv check.

v9 - Switched to u8 for crtc_sagv_mask(Ville Syrjälä)
- crtc_sagv_mask now is pipe_sagv_mask(Ville Syrjälä)
- Extracted sagv checking logic from skl/icl/tgl_compute_sagv_mask
- Extracted skl_plane_wm_level function and passing latency to separate patches(Ville Syrjälä)
- Removed part of unneeded copy-paste from tgl_check_pipe_fits_sagv_wm (Ville Syrjälä)
- Now using simple assignment for sagv_wm0 as it contains only pod types and no pointers(Ville Syrjälä)
- Fixed intel_can_enable_sagv not to do double duty, now it only check SAGV bits by ANDing those between local and global state. The SAGV masks are now computed after watermarks are available, in order to be able to figure out if ddb ranges are fitting nicely. (Ville Syrjälä)
- Now having uv_sagv_wm0 and sagv_wm0, otherwise we have wrong logic when using skl_plane_wm_level accessor, as we had previously for Gen11+ color plane and regular wm levels, so probably both has to be recalculated with additional SAGV block time for Level 0.

v10: - Starting to use new global state for storing pipe_sagv_mask

Cc Ville Syrjälä <[email protected]>
Cc James Ausmus <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_bw.h       |   6 +
 drivers/gpu/drm/i915/display/intel_display.c  |  22 +-
 .../drm/i915/display/intel_display_types.h    |   8 +
 drivers/gpu/drm/i915/intel_pm.c               | 426 ++++++++++++++++--
 drivers/gpu/drm/i915/intel_pm.h               |   4 +-
 5 files changed, 426 insertions(+), 40 deletions(-)
drivers/gpu/drm/i915/display/intel_bw.h +6 -0
index ac004d6f4276..6c33d3af50a9 100644
@@ -18,6 +18,12 @@ struct intel_crtc_state;
 struct intel_bw_state {
 	struct intel_global_state base;
 
+	/*
+	 * Contains a bit mask, whether correspondent
+	 * pipe allows SAGV or not.
+	 */
+	u8 pipe_sagv_mask;
+
 	unsigned int data_rate[I915_MAX_PIPES];
 	u8 num_active_planes[I915_MAX_PIPES];
 };
drivers/gpu/drm/i915/display/intel_display.c +15 -7
index b0af37fb6d4a..debe3e93d2e7 100644
@@ -14080,7 +14080,10 @@ static void verify_wm_state(struct intel_crtc *crtc,
 		/* Watermarks */
 		for (level = 0; level <= max_level; level++) {
 			if (skl_wm_level_equals(&hw_plane_wm->wm[level],
-						&sw_plane_wm->wm[level]))
+						&sw_plane_wm->wm[level]) ||
+			   (skl_wm_level_equals(&hw_plane_wm->wm[level],
+						&sw_plane_wm->sagv_wm0) &&
+			   (level == 0)))
 				continue;
 
 			drm_err(&dev_priv->drm,
@@ -14135,7 +14138,10 @@ static void verify_wm_state(struct intel_crtc *crtc,
 		/* Watermarks */
 		for (level = 0; level <= max_level; level++) {
 			if (skl_wm_level_equals(&hw_plane_wm->wm[level],
-						&sw_plane_wm->wm[level]))
+						&sw_plane_wm->wm[level]) ||
+			   (skl_wm_level_equals(&hw_plane_wm->wm[level],
+						&sw_plane_wm->sagv_wm0) &&
+			   (level == 0)))
 				continue;
 
 			drm_err(&dev_priv->drm,
@@ -15659,8 +15665,9 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
 		 * SKL workaround: bspec recommends we disable the SAGV when we
 		 * have more then one pipe enabled
 		 */
-		if (!intel_can_enable_sagv(state))
-			intel_disable_sagv(dev_priv);
+		if (INTEL_GEN(dev_priv) < 11)
+			if (!intel_can_enable_sagv(dev_priv))
+				intel_disable_sagv(dev_priv);
 
 		intel_modeset_verify_disabled(dev_priv, state);
 	}
@@ -15752,8 +15759,10 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
 	if (state->modeset)
 		intel_verify_planes(state);
 
-	if (state->modeset && intel_can_enable_sagv(state))
-		intel_enable_sagv(dev_priv);
+	if (INTEL_GEN(dev_priv) < 11) {
+		if (state->modeset && intel_can_enable_sagv(dev_priv))
+			intel_enable_sagv(dev_priv);
+	}
 
 	drm_atomic_helper_commit_hw_done(&state->base);
 
@@ -15905,7 +15914,6 @@ static int intel_atomic_commit(struct drm_device *dev,
 
 	if (state->global_state_changed) {
 		assert_global_state_locked(dev_priv);
-
 		dev_priv->active_pipes = state->active_pipes;
 	}
 
drivers/gpu/drm/i915/display/intel_display_types.h +8 -0
index 7c6133a9c51b..d4872628487c 100644
@@ -478,6 +478,12 @@ struct intel_atomic_state {
 	 */
 	u8 active_pipe_changes;
 
+	/*
+	 * Used to determine if we already had calculated
+	 * SAGV mask for this state once.
+	 */
+	bool sagv_calculated;
+
 	u8 active_pipes;
 
 	struct intel_shared_dpll_state shared_dpll[I915_NUM_PLLS];
@@ -650,6 +656,8 @@ struct skl_plane_wm {
 	struct skl_wm_level wm[8];
 	struct skl_wm_level uv_wm[8];
 	struct skl_wm_level trans_wm;
+	struct skl_wm_level sagv_wm0;
+	struct skl_wm_level uv_sagv_wm0;
 	bool is_planar;
 };
 
drivers/gpu/drm/i915/intel_pm.c +394 -32

580 lines not on this page · raw message

drivers/gpu/drm/i915/intel_pm.h +3 -1
index c06c6a846d9a..9fb2592d67b5 100644
@@ -42,7 +42,9 @@ void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
 			      struct skl_pipe_wm *out);
 void g4x_wm_sanitize(struct drm_i915_private *dev_priv);
 void vlv_wm_sanitize(struct drm_i915_private *dev_priv);
-bool intel_can_enable_sagv(struct intel_atomic_state *state);
+bool intel_can_enable_sagv(struct drm_i915_private *dev_priv);
+bool intel_can_enable_sagv_for_state(struct intel_atomic_state *state);
+bool intel_has_sagv(struct drm_i915_private *dev_priv);
 int intel_enable_sagv(struct drm_i915_private *dev_priv);
 int intel_disable_sagv(struct drm_i915_private *dev_priv);
 bool skl_wm_level_equals(const struct skl_wm_level *l1,
Signature · 6 lines
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

PATCH v14 5/7 drm/i915: Added required new PCode commands

In reply to Stanislav Lisovskiy

We need a new PCode request commands and reply codes to be added as a prepartion patch for QGV points restricting for new SAGV support.

v2: - Extracted those changes into separate patch
(Ville Syrjälä)

---
 drivers/gpu/drm/i915/i915_reg.h       | 4 ++++
 drivers/gpu/drm/i915/intel_sideband.c | 2 ++
 2 files changed, 6 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +4 -0
index 0bd431f6a011..3ddc6347d865 100644
@@ -8998,6 +8998,7 @@ enum {
 #define     GEN7_PCODE_ILLEGAL_DATA		0x3
 #define     GEN11_PCODE_ILLEGAL_SUBCOMMAND	0x4
 #define     GEN11_PCODE_LOCKED			0x6
+#define     GEN11_PCODE_REJECTED		0x11
 #define     GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x10
 #define   GEN6_PCODE_WRITE_RC6VIDS		0x4
 #define   GEN6_PCODE_READ_RC6VIDS		0x5
@@ -9019,6 +9020,7 @@ enum {
 #define   ICL_PCODE_MEM_SUBSYSYSTEM_INFO	0xd
 #define     ICL_PCODE_MEM_SS_READ_GLOBAL_INFO	(0x0 << 8)
 #define     ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point)	(((point) << 16) | (0x1 << 8))
+#define   ICL_PCODE_SAGV_DE_MEM_SS_CONFIG	0xe
 #define   GEN6_PCODE_READ_D_COMP		0x10
 #define   GEN6_PCODE_WRITE_D_COMP		0x11
 #define   HSW_PCODE_DE_WRITE_FREQ_REQ		0x17
@@ -9031,6 +9033,8 @@ enum {
 #define     GEN9_SAGV_IS_DISABLED		0x1
 #define     GEN9_SAGV_ENABLE			0x3
 #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
+#define GEN11_PCODE_POINTS_RESTRICTED		0x0
+#define GEN11_PCODE_POINTS_RESTRICTED_MASK	0x1
 #define GEN6_PCODE_DATA				_MMIO(0x138128)
 #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
 #define   GEN6_PCODE_FREQ_RING_RATIO_SHIFT	16
drivers/gpu/drm/i915/intel_sideband.c +2 -0
index 1447e7516cb7..1e7dd6b6f103 100644
@@ -370,6 +370,8 @@ static inline int gen7_check_mailbox_status(u32 mbox)
 		return -ENXIO;
 	case GEN11_PCODE_LOCKED:
 		return -EBUSY;
+	case GEN11_PCODE_REJECTED:
+		return -EACCES;
 	case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE:
 		return -EOVERFLOW;
 	default:
Signature · 6 lines
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

PATCH v14 6/7 drm/i915: Restrict qgv points which don't have enough bandwidth.

In reply to Stanislav Lisovskiy

According to BSpec 53998, we should try to restrict qgv points, which can't provide enough bandwidth for desired display configuration.

Currently we are just comparing against all of
those and take minimum(worst case).

v2: Fixed wrong PCode reply mask, removed hardcoded
values.

v3: Forbid simultaneous legacy SAGV PCode requests and
restricting qgv points. Put the actual restriction to commit function, added serialization(thanks to Ville) to prevent commit being applied out of order in case of nonblocking and/or nomodeset commits.

v4:
- Minor code refactoring, fixed few typos(thanks to James Ausmus)
- Change the naming of qgv point
masking/unmasking functions(James Ausmus).
- Simplify the masking/unmasking operation itself,
as we don't need to mask only single point per request(James Ausmus)
- Reject and stick to highest bandwidth point if SAGV can't be enabled(BSpec)

v5:
- Add new mailbox reply codes, which seems to happen during boot time for TGL and indicate that QGV setting is not yet available.

v6:
- Increase number of supported QGV points to be in sync with BSpec.

v7: - Rebased and resolved conflict to fix build failure.
- Fix NUM_QGV_POINTS to 8 and moved that to header file(James Ausmus)

v8: - Don't report an error if we can't restrict qgv points, as SAGV
can be disabled by BIOS, which is completely legal. So don't make CI panic. Instead if we detect that there is only 1 QGV point accessible just analyze if we can fit the required bandwidth requirements, but no need in restricting.

v9: - Fix wrong QGV transition if we have 0 planes and no SAGV
simultaneously.

v10: - Fix CDCLK corruption, because of global state getting serialized
without modeset, which caused copying of non-calculated cdclk to be copied to dev_priv(thanks to Ville for the hint).

v11: - Remove unneeded headers and spaces(Matthew Roper)
- Remove unneeded intel_qgv_info qi struct from bw check and zero out the needed one(Matthew Roper)
- Changed QGV error message to have more clear meaning(Matthew Roper)
- Use state->modeset_set instead of any_ms(Matthew Roper)
- Moved NUM_SAGV_POINTS from i915_reg.h to i915_drv.h where it's used
- Keep using crtc_state->hw.active instead of .enable(Matthew Roper)
- Moved unrelated changes to other patch(using latency as parameter for plane wm calculation, moved to SAGV refactoring patch)

v12: - Fix rebase conflict with own temporary SAGV/QGV fix.
- Remove unnecessary mask being zero check when unmasking qgv points as this is completely legal(Matt Roper)
- Check if we are setting the same mask as already being set in hardware to prevent error from PCode.
- Fix error message when restricting/unrestricting qgv points to "mask/unmask" which sounds more accurate(Matt Roper)
- Move sagv status setting to icl_get_bw_info from atomic check as this should be calculated only once.(Matt Roper)
- Edited comments for the case when we can't enable SAGV and use only 1 QGV point with highest bandwidth to be more understandable.(Matt Roper)

v13: - Moved max_data_rate in bw check to closer scope(Ville Syrjälä)
- Changed comment for zero new_mask in qgv points masking function to better reflect reality(Ville Syrjälä)
- Simplified bit mask operation in qgv points masking function (Ville Syrjälä)
- Moved intel_qgv_points_mask closer to gen11 SAGV disabling, however this still can't be under modeset condition(Ville Syrjälä)
- Packed qgv_points_mask as u8 and moved closer to pipe_sagv_mask (Ville Syrjälä)
- Extracted PCode changes to separate patch.(Ville Syrjälä)
- Now treat num_planes 0 same as 1 to avoid confusion and returning max_bw as 0, which would prevent choosing QGV point having max bandwidth in case if SAGV is not allowed, as per BSpec(Ville Syrjälä)
- Do the actual qgv_points_mask swap in the same place as all other global state parts like cdclk are swapped. In the next patch, this all will be moved to bw state as global state, once new global state patch series from Ville lands

v14: - Now using global state to serialize access to qgv points

Cc Ville Syrjälä <[email protected]>
Cc James Ausmus <[email protected]>
---
 drivers/gpu/drm/i915/display/intel_bw.c      | 165 +++++++++++++------
 drivers/gpu/drm/i915/display/intel_bw.h      |   9 +
 drivers/gpu/drm/i915/display/intel_display.c | 109 ++++++++++++
 drivers/gpu/drm/i915/i915_drv.h              |   3 +
 4 files changed, 236 insertions(+), 50 deletions(-)
drivers/gpu/drm/i915/display/intel_bw.c +115 -50
index c0168dfe8884..981891d275d9 100644
@@ -8,6 +8,9 @@
 #include "intel_bw.h"
 #include "intel_display_types.h"
 #include "intel_sideband.h"
+#include "intel_atomic.h"
+#include "intel_pm.h"
+
 
 /* Parameters for Qclk Geyserville (QGV) */
 struct intel_qgv_point {
@@ -113,6 +116,26 @@ static int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv,
 	return 0;
 }
 
+int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
+				  u32 points_mask)
+{
+	int ret;
+
+	/* bspec says to keep retrying for at least 1 ms */
+	ret = skl_pcode_request(dev_priv, ICL_PCODE_SAGV_DE_MEM_SS_CONFIG,
+				points_mask,
+				GEN11_PCODE_POINTS_RESTRICTED_MASK,
+				GEN11_PCODE_POINTS_RESTRICTED,
+				1);
+
+	if (ret < 0) {
+		DRM_ERROR("Failed to disable qgv points (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int icl_get_qgv_points(struct drm_i915_private *dev_priv,
 			      struct intel_qgv_info *qi)
 {
@@ -239,6 +262,16 @@ static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel
 			break;
 	}
 
+	/*
+	 * In case if SAGV is disabled in BIOS, we always get 1
+	 * SAGV point, but we can't send PCode commands to restrict it
+	 * as it will fail and pointless anyway.
+	 */
+	if (qi.num_points == 1)
+		dev_priv->sagv_status = I915_SAGV_NOT_CONTROLLED;
+	else
+		dev_priv->sagv_status = I915_SAGV_ENABLED;
+
 	return 0;
 }
 
@@ -258,7 +291,7 @@ static unsigned int icl_max_bw(struct drm_i915_private *dev_priv,
 		if (qgv_point >= bi->num_qgv_points)
 			return UINT_MAX;
 
-		if (num_planes >= bi->num_planes)
+		if (num_planes >= bi->num_planes || !num_planes)
 			return bi->deratedbw[qgv_point];
 	}
 
@@ -276,34 +309,6 @@ void intel_bw_init_hw(struct drm_i915_private *dev_priv)
 		icl_get_bw_info(dev_priv, &icl_sa_info);
 }
 
-static unsigned int intel_max_data_rate(struct drm_i915_private *dev_priv,
-					int num_planes)
-{
-	if (INTEL_GEN(dev_priv) >= 11) {
-		/*
-		 * Any bw group has same amount of QGV points
-		 */
-		const struct intel_bw_info *bi =
-			&dev_priv->max_bw[0];
-		unsigned int min_bw = UINT_MAX;
-		int i;
-
-		/*
-		 * FIXME with SAGV disabled maybe we can assume
-		 * point 1 will always be used? Seems to match
-		 * the behaviour observed in the wild.
-		 */
-		for (i = 0; i < bi->num_qgv_points; i++) {
-			unsigned int bw = icl_max_bw(dev_priv, num_planes, i);
-
-			min_bw = min(bw, min_bw);
-		}
-		return min_bw;
-	} else {
-		return UINT_MAX;
-	}
-}
-
 static unsigned int intel_bw_crtc_num_active_planes(const struct intel_crtc_state *crtc_state)
 {
 	/*
@@ -416,11 +421,16 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
 	struct intel_crtc_state *new_crtc_state, *old_crtc_state;
-	struct intel_bw_state *bw_state = NULL;
-	unsigned int data_rate, max_data_rate;
+	struct intel_bw_state *new_bw_state = NULL;
+	struct intel_bw_state *old_bw_state = NULL;
+	unsigned int data_rate;
 	unsigned int num_active_planes;
 	struct intel_crtc *crtc;
 	int i, ret;
+	u32 allowed_points = 0;
+	unsigned int max_bw_point = 0, max_bw = 0;
+	unsigned int num_qgv_points = dev_priv->max_bw[0].num_qgv_points;
+	u32 mask = (1 << num_qgv_points) - 1;
 
 	/* FIXME earlier gens need some checks too */
 	if (INTEL_GEN(dev_priv) < 11)
@@ -445,41 +455,96 @@ int intel_bw_atomic_check(struct intel_atomic_state *state)
 		    old_active_planes == new_active_planes)
 			continue;
 
-		bw_state  = intel_atomic_get_bw_state(state);
-		if (IS_ERR(bw_state))
-			return PTR_ERR(bw_state);
+		new_bw_state = intel_atomic_get_new_bw_state(state);
+		if (IS_ERR(new_bw_state))
+			return PTR_ERR(new_bw_state);
 
-		bw_state->data_rate[crtc->pipe] = new_data_rate;
-		bw_state->num_active_planes[crtc->pipe] = new_active_planes;
+		new_bw_state->data_rate[crtc->pipe] = new_data_rate;
+		new_bw_state->num_active_planes[crtc->pipe] = new_active_planes;
 
 		drm_dbg_kms(&dev_priv->drm,
 			    "pipe %c data rate %u num active planes %u\n",
 			    pipe_name(crtc->pipe),
-			    bw_state->data_rate[crtc->pipe],
-			    bw_state->num_active_planes[crtc->pipe]);
+			    new_bw_state->data_rate[crtc->pipe],
+			    new_bw_state->num_active_planes[crtc->pipe]);
 	}
 
-	if (!bw_state)
+	if (!new_bw_state)
 		return 0;
 
-	ret = intel_atomic_lock_global_state(&bw_state->base);
-	if (ret)
-		return ret;
+	data_rate = intel_bw_data_rate(dev_priv, new_bw_state);
+	num_active_planes = intel_bw_num_active_planes(dev_priv, new_bw_state);
 
-	data_rate = intel_bw_data_rate(dev_priv, bw_state);
-	num_active_planes = intel_bw_num_active_planes(dev_priv, bw_state);
+	data_rate = DIV_ROUND_UP(data_rate, 1000);
 
-	max_data_rate = intel_max_data_rate(dev_priv, num_active_planes);
+	for (i = 0; i < num_qgv_points; i++) {
+		unsigned int max_data_rate;
 
-	data_rate = DIV_ROUND_UP(data_rate, 1000);
+		max_data_rate = icl_max_bw(dev_priv, num_active_planes, i);
+		/*
+		 * We need to know which qgv point gives us
+		 * maximum bandwidth in order to disable SAGV
+		 * if we find that we exceed SAGV block time
+		 * with watermarks. By that moment we already
+		 * have those, as it is calculated earlier in
+		 * intel_atomic_check,
+		 */
+		if (max_data_rate > max_bw) {
+			max_bw_point = i;
+			max_bw = max_data_rate;
+		}
+		if (max_data_rate >= data_rate)
+			allowed_points |= BIT(i);
+		DRM_DEBUG_KMS("QGV point %d: max bw %d required %d\n",
+			      i, max_data_rate, data_rate);
+	}
 
-	if (data_rate > max_data_rate) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "Bandwidth %u MB/s exceeds max available %d MB/s (%d active planes)\n",
-			    data_rate, max_data_rate, num_active_planes);
+	/*
+	 * BSpec states that we always should have at least one allowed point
+	 * left, so if we couldn't - simply reject the configuration for obvious
+	 * reasons.
+	 */
+	if (allowed_points == 0) {
+		DRM_DEBUG_KMS("No QGV points provide sufficient memory"
+			      " bandwidth for display configuration.\n");
 		return -EINVAL;
 	}
 
+	/*
+	 * Leave only single point with highest bandwidth, if
+	 * we can't enable SAGV due to the increased memory latency it may
+	 * cause.
+	 */
+	if (!intel_can_enable_sagv_for_state(state)) {
+		allowed_points = 1 << max_bw_point;
+		DRM_DEBUG_KMS("No SAGV, using single QGV point %d\n",
+			      max_bw_point);
+	}
+	/*
+	 * We store the ones which need to be masked as that is what PCode
+	 * actually accepts as a parameter.
+	 */
+	new_bw_state->qgv_points_mask = (~allowed_points) & mask;
+
+	DRM_DEBUG_KMS("New state %p qgv mask %x\n",
+		      state, new_bw_state->qgv_points_mask);
+
+	old_bw_state = intel_atomic_get_old_bw_state(state);
+	if (IS_ERR(old_bw_state))
+		return PTR_ERR(old_bw_state);
+
+	/*
+	 * If the actual mask had changed we need to make sure that
+	 * the commits are serialized(in case this is a nomodeset, nonblocking)
+	 */
+	if (new_bw_state->qgv_points_mask != old_bw_state->qgv_points_mask) {
+		ret = intel_atomic_serialize_global_state(&new_bw_state->base);
+		if (ret) {
+			DRM_DEBUG_KMS("Could not serialize global state\n");
+			return ret;
+		}
+	}
+
 	return 0;
 }
 
drivers/gpu/drm/i915/display/intel_bw.h +9 -0
index 6c33d3af50a9..64e8c16934a6 100644
@@ -24,6 +24,13 @@ struct intel_bw_state {
 	 */
 	u8 pipe_sagv_mask;
 
+	/*
+	 * Current QGV points mask, which restricts
+	 * some particular SAGV states, not to confuse
+	 * with pipe_sagv_mask.
+	 */
+	u8 qgv_points_mask;
+
 	unsigned int data_rate[I915_MAX_PIPES];
 	u8 num_active_planes[I915_MAX_PIPES];
 };
@@ -44,5 +51,7 @@ int intel_bw_init(struct drm_i915_private *dev_priv);
 int intel_bw_atomic_check(struct intel_atomic_state *state);
 void intel_bw_crtc_update(struct intel_bw_state *bw_state,
 			  const struct intel_crtc_state *crtc_state);
+int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
+				  u32 points_mask);
 
 #endif /* __INTEL_BW_H__ */
drivers/gpu/drm/i915/display/intel_display.c +109 -0

127 lines not on this page · raw message

drivers/gpu/drm/i915/i915_drv.h +3 -0
index a71ff233cc55..a7f4f4782219 100644
@@ -849,6 +849,9 @@ enum intel_pipe_crc_source {
 	INTEL_PIPE_CRC_SOURCE_MAX,
 };
 
+/* BSpec precisely defines this */
+#define NUM_SAGV_POINTS 8
+
 #define INTEL_PIPE_CRC_ENTRIES_NR	128
 struct intel_pipe_crc {
 	spinlock_t lock;
Signature · 6 lines
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#8 lore raw

PATCH v14 7/7 drm/i915: Enable SAGV support for Gen12

In reply to Stanislav Lisovskiy

Flip the switch and enable SAGV support
for Gen12 also.

---
 drivers/gpu/drm/i915/intel_pm.c | 4 ----
 1 file changed, 4 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +0 -4
index 0ee4ac6976f8..d89d99c24e71 100644
@@ -3632,10 +3632,6 @@ static bool skl_needs_memory_bw_wa(struct drm_i915_private *dev_priv)
 bool
 intel_has_sagv(struct drm_i915_private *dev_priv)
 {
-	/* HACK! */
-	if (IS_GEN(dev_priv, 12))
-		return false;
-
 	return (IS_GEN9_BC(dev_priv) || INTEL_GEN(dev_priv) >= 10) &&
 		dev_priv->sagv_status != I915_SAGV_NOT_CONTROLLED;
 }
Signature · 6 lines
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#9 lore raw

[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Refactor Gen11+ SAGV support (rev2)

In reply to Stanislav Lisovskiy
== Series Details ==

== Series Details ==

Series: Refactor Gen11+ SAGV support (rev2)
URL : https://patchwork.freedesktop.org/series/72923/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
37ec63f7b6aa drm/i915: Start passing latency as parameter
bbfa09f48831 drm/i915: Introduce skl_plane_wm_level accessor.
18e583700e52 drm/i915: Init obj state in intel_atomic_get_old/new_global_obj_state
-:12: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line)
#12: 
also in intel_atomic_get_old_global_obj_state and intel_atomic_get_new_global_obj_state

-:45: WARNING:LINE_SPACING: Missing a blank line after declarations #45: FILE: drivers/gpu/drm/i915/display/intel_bw.c:395:
+ struct intel_global_state *bw_state;
+ bw_state = intel_atomic_get_new_global_obj_state(state, &dev_priv->bw_obj);

-:89: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis #89: FILE: drivers/gpu/drm/i915/display/intel_global_state.c:72:
+_intel_atomic_init_global_obj_state(struct intel_atomic_state *state,
struct intel_global_obj *obj)

-:108: CHECK:LINE_SPACING: Please don't use multiple blank lines #108: FILE: drivers/gpu/drm/i915/display/intel_global_state.c:111:

+

total: 0 errors, 2 warnings, 2 checks, 109 lines checked
05c12cc8f8d9 drm/i915: Refactor intel_can_enable_sagv
-:77: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line) #77:
when using skl_plane_wm_level accessor, as we had previously for Gen11+

-:284: CHECK:LINE_SPACING: Please don't use multiple blank lines #284: FILE: drivers/gpu/drm/i915/intel_pm.c:3820:
+
+

-:438: WARNING:LINE_SPACING: Missing a blank line after declarations #438: FILE: drivers/gpu/drm/i915/intel_pm.c:3974:
+ int active_pipe_bit = dev_priv->active_pipes & BIT(i);
+ if (active_pipe_bit) {

-:641: WARNING:LONG_LINE: line over 100 characters #641: FILE: drivers/gpu/drm/i915/intel_pm.c:5560:
+ old_wm->sagv_wm0.min_ddb_alloc : old_wm->wm[0].min_ddb_alloc;

-:644: WARNING:LONG_LINE: line over 100 characters #644: FILE: drivers/gpu/drm/i915/intel_pm.c:5563:
+ new_wm->sagv_wm0.min_ddb_alloc : new_wm->wm[0].min_ddb_alloc;

-:732: WARNING:LONG_LINE: line over 100 characters #732: FILE: drivers/gpu/drm/i915/intel_pm.c:5799:
+ &new_crtc_state->wm.skl.optimal.planes[plane_id])) {

total: 0 errors, 5 warnings, 1 checks, 674 lines checked 5f8d124e82f6 drm/i915: Added required new PCode commands 5527e670a257 drm/i915: Restrict qgv points which don't have enough bandwidth. 4b30ba5d0b64 drm/i915: Enable SAGV support for Gen12

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#10 lore raw

[Intel-gfx] ✗ Fi.CI.SPARSE: warning for Refactor Gen11+ SAGV support (rev2)

In reply to Stanislav Lisovskiy
== Series Details ==

== Series Details ==

Series: Refactor Gen11+ SAGV support (rev2)
URL : https://patchwork.freedesktop.org/series/72923/
State : warning

== Summary ==

$ dim sparse origin/drm-tip
Sparse version: v0.6.0
Commit: drm/i915: Start passing latency as parameter
Okay!

Commit: drm/i915: Introduce skl_plane_wm_level accessor. Okay!

Commit: drm/i915: Init obj state in intel_atomic_get_old/new_global_obj_state Okay!

Commit: drm/i915: Refactor intel_can_enable_sagv
+drivers/gpu/drm/i915/intel_pm.c:3859:6: warning: symbol 'intel_compute_sagv_mask' was not declared. Should it be static?

Commit: drm/i915: Added required new PCode commands Okay!

Commit: drm/i915: Restrict qgv points which don't have enough bandwidth. Okay!

Commit: drm/i915: Enable SAGV support for Gen12
Okay!

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#11 lore raw

[Intel-gfx] ✗ Fi.CI.BAT: failure for Refactor Gen11+ SAGV support (rev2)

In reply to Stanislav Lisovskiy
== Series Details ==

== Series Details ==

Series: Refactor Gen11+ SAGV support (rev2)
URL : https://patchwork.freedesktop.org/series/72923/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_7864 -> Patchwork_16397
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with Patchwork_16397 absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_16397, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in Patchwork_16397:

### IGT changes ###

#### Possible regressions ####

* igt@i915_module_load@reload-no-display:
- fi-blb-e6850: [PASS][1] -> [INCOMPLETE][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-blb-e6850/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-blb-e6850/igt@[email protected]

* igt@kms_busy@basic-flip-pipe-a:
- fi-ivb-3770: [PASS][3] -> [INCOMPLETE][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-ivb-3770/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-ivb-3770/igt@[email protected]
- fi-ilk-650: [PASS][5] -> [INCOMPLETE][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-ilk-650/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-ilk-650/igt@[email protected]
- fi-icl-u3: [PASS][7] -> [INCOMPLETE][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-icl-u3/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-icl-u3/igt@[email protected]
- fi-bsw-kefka: [PASS][9] -> [INCOMPLETE][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-bsw-kefka/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-bsw-kefka/igt@[email protected]
- fi-hsw-peppy: [PASS][11] -> [INCOMPLETE][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-hsw-peppy/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-hsw-peppy/igt@[email protected]
- fi-hsw-4770r: [PASS][13] -> [INCOMPLETE][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-hsw-4770r/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-hsw-4770r/igt@[email protected]
- fi-icl-y: [PASS][15] -> [INCOMPLETE][16]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-icl-y/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-icl-y/igt@[email protected]
- fi-bdw-5557u: [PASS][17] -> [INCOMPLETE][18]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-bdw-5557u/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-bdw-5557u/igt@[email protected]
- fi-icl-dsi: [PASS][19] -> [INCOMPLETE][20]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-icl-dsi/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-icl-dsi/igt@[email protected]
- fi-hsw-4770: [PASS][21] -> [INCOMPLETE][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-hsw-4770/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-hsw-4770/igt@[email protected]
- fi-icl-guc: [PASS][23] -> [INCOMPLETE][24]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-icl-guc/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-icl-guc/igt@[email protected]
- fi-icl-u2: [PASS][25] -> [INCOMPLETE][26]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-icl-u2/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-icl-u2/igt@[email protected]

* igt@kms_busy@basic-flip-pipe-c:
- fi-bsw-n3050: [PASS][27] -> [INCOMPLETE][28]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-bsw-n3050/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-bsw-n3050/igt@[email protected]

* igt@kms_force_connector_basic@force-connector-state:
- fi-bsw-nick: [PASS][29] -> [INCOMPLETE][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-bsw-nick/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-bsw-nick/igt@[email protected]

* igt@runner@aborted:
- fi-pnv-d510: NOTRUN -> [FAIL][31]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-pnv-d510/igt@[email protected]
- fi-hsw-4770r: NOTRUN -> [FAIL][32]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-hsw-4770r/igt@[email protected]
- fi-hsw-peppy: NOTRUN -> [FAIL][33]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-hsw-peppy/igt@[email protected]
- fi-gdg-551: NOTRUN -> [FAIL][34]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-gdg-551/igt@[email protected]
- fi-snb-2520m: NOTRUN -> [FAIL][35]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-snb-2520m/igt@[email protected]
- fi-hsw-4770: NOTRUN -> [FAIL][36]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-hsw-4770/igt@[email protected]
- fi-snb-2600: NOTRUN -> [FAIL][37]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-snb-2600/igt@[email protected]
- fi-ivb-3770: NOTRUN -> [FAIL][38]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-ivb-3770/igt@[email protected]
- fi-blb-e6850: NOTRUN -> [FAIL][39]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-blb-e6850/igt@[email protected]

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@runner@aborted:
- {fi-ehl-1}: NOTRUN -> [FAIL][40]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-ehl-1/igt@[email protected]

Known issues
------------

Here are the changes found in Patchwork_16397 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_close_race@basic-threads:
- fi-byt-j1900: [PASS][41] -> [INCOMPLETE][42] ([i915#45])
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-byt-j1900/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-byt-j1900/igt@[email protected]

* igt@gem_exec_parallel@fds:
- fi-byt-n2820: [PASS][43] -> [INCOMPLETE][44] ([i915#45])
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-byt-n2820/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-byt-n2820/igt@[email protected]

* igt@gem_exec_suspend@basic-s4-devices:
- fi-tgl-y: [PASS][45] -> [FAIL][46] ([CI#94])
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-tgl-y/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-tgl-y/igt@[email protected]

* igt@gem_flink_basic@flink-lifetime:
- fi-tgl-y: [PASS][47] -> [DMESG-WARN][48] ([CI#94] / [i915#402])
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-tgl-y/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-tgl-y/igt@[email protected]

* igt@i915_module_load@reload-no-display:
- fi-pnv-d510: [PASS][49] -> [INCOMPLETE][50] ([i915#299])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-pnv-d510/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-pnv-d510/igt@[email protected]
- fi-kbl-8809g: [PASS][51] -> [INCOMPLETE][52] ([fdo#103665])
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-kbl-8809g/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-kbl-8809g/igt@[email protected]
- fi-gdg-551: [PASS][53] -> [INCOMPLETE][54] ([i915#172])
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-gdg-551/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-gdg-551/igt@[email protected]

* igt@kms_busy@basic-flip-pipe-a:
- fi-snb-2600: [PASS][55] -> [INCOMPLETE][56] ([i915#696] / [i915#82])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-snb-2600/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-snb-2600/igt@[email protected]
- fi-tgl-y: [PASS][57] -> [INCOMPLETE][58] ([CI#94] / [i915#472])
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-tgl-y/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-tgl-y/igt@[email protected]
- fi-skl-guc: [PASS][59] -> [INCOMPLETE][60] ([i915#198])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-skl-guc/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-skl-guc/igt@[email protected]
- fi-skl-6700k2: [PASS][61] -> [INCOMPLETE][62] ([i915#198])
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-skl-6700k2/igt@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-skl-6700k2/igt@[email protected]
- fi-elk-e7500: [PASS][63] -> [INCOMPLETE][64] ([i915#66])
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-elk-e7500/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-elk-e7500/igt@[email protected]
- fi-cml-u2: [PASS][65] -> [INCOMPLETE][66] ([i915#283])
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-cml-u2/igt@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-cml-u2/igt@[email protected]

* igt@kms_force_connector_basic@force-connector-state:
- fi-kbl-guc: [PASS][67] -> [INCOMPLETE][68] ([i915#938])
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-kbl-guc/igt@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-kbl-guc/igt@[email protected]

#### Possible fixes ####

* igt@kms_addfb_basic@bad-pitch-0:
- fi-tgl-y: [DMESG-WARN][69] ([CI#94] / [i915#402]) -> [PASS][70]
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-tgl-y/igt@[email protected]
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-tgl-y/igt@[email protected]

#### Warnings ####

* igt@gem_exec_parallel@contexts:
- fi-byt-n2820: [TIMEOUT][71] ([fdo#112271]) -> [TIMEOUT][72] ([fdo#112271] / [i915#1084])
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_7864/fi-byt-n2820/igt@[email protected]
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/fi-byt-n2820/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[CI#94]: https://gitlab.freedesktop.org/gfx-ci/i915-infra/issues/94
[fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
[fdo#112271]: https://bugs.freedesktop.org/show_bug.cgi?id=112271
[i915#1084]: https://gitlab.freedesktop.org/drm/intel/issues/1084
[i915#172]: https://gitlab.freedesktop.org/drm/intel/issues/172
[i915#198]: https://gitlab.freedesktop.org/drm/intel/issues/198
[i915#283]: https://gitlab.freedesktop.org/drm/intel/issues/283
[i915#299]: https://gitlab.freedesktop.org/drm/intel/issues/299
[i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
[i915#45]: https://gitlab.freedesktop.org/drm/intel/issues/45
[i915#472]: https://gitlab.freedesktop.org/drm/intel/issues/472
[i915#66]: https://gitlab.freedesktop.org/drm/intel/issues/66
[i915#696]: https://gitlab.freedesktop.org/drm/intel/issues/696
[i915#82]: https://gitlab.freedesktop.org/drm/intel/issues/82
[i915#937]: https://gitlab.freedesktop.org/drm/intel/issues/937
[i915#938]: https://gitlab.freedesktop.org/drm/intel/issues/938

Participating hosts (50 -> 32)
------------------------------

Additional (1): fi-snb-2520m
Missing (19): fi-kbl-soraka fi-ilk-m540 fi-bxt-dsi fi-hsw-4200u fi-skl-6770hq fi-byt-squawks fi-bwr-2160 fi-apl-guc fi-kbl-7500u fi-ctg-p8600 fi-cfl-8700k fi-cfl-guc fi-whl-u fi-kbl-x1275 fi-cfl-8109u fi-bdw-samus fi-byt-clapper fi-skl-6600u fi-kbl-r

Build changes
-------------

* CI: CI-20190529 -> None
* Linux: CI_DRM_7864 -> Patchwork_16397

CI-20190529: 20190529
CI_DRM_7864: 5a140e2fc771e4c8b10d14e2db7bfb4996ee9d8a @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5417: 33cc93c8ba5daa0b7498f297a4f626844d895d06 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_16397: 4b30ba5d0b6434315497d7ecc97ec530e8827cc5 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

4b30ba5d0b64 drm/i915: Enable SAGV support for Gen12
5527e670a257 drm/i915: Restrict qgv points which don't have enough bandwidth. 5f8d124e82f6 drm/i915: Added required new PCode commands
05c12cc8f8d9 drm/i915: Refactor intel_can_enable_sagv
18e583700e52 drm/i915: Init obj state in intel_atomic_get_old/new_global_obj_state bbfa09f48831 drm/i915: Introduce skl_plane_wm_level accessor. 37ec63f7b6aa drm/i915: Start passing latency as parameter

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_16397/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx