mm/hotplug: Only respect mem= parameter during boot stage
Subsystems (3)
PATCH v3 1/1 mm/hotplug: Only respect mem= parameter during boot stage
In commit 357b4da50a62 ("x86: respect memory size limiting via mem= parameter") a global varialbe max_mem_size is added to store the value parsed from 'mem= ', then checked when memory region is added. This truly stops those DIMMs from being added into system memory during boot-time.
However, it also limits the later memory hotplug functionality. Any DIMM can't be hotplugged any more if its region is beyond the max_mem_size. We will get errors like:
[ 216.387164] acpi PNP0C80:02: add_memory failed [ 216.389301] acpi PNP0C80:02: acpi_memory_enable_device() error [ 216.392187] acpi PNP0C80:02: Enumeration failure
This will cause issue in a known use case where 'mem=' is added to the hypervisor. The memory that lies after 'mem=' boundary will be assigned to KVM guests. After commit 357b4da50a62 merged, memory can't be extended dynamically if system memory on hypervisor is not sufficient.
So fix it by also checking if it's during boot-time restricting to add memory. Otherwise, skip the restriction.
And also add this use case to document of 'mem=' kernel parameter.
---v2->v3:
In discussion of v1 and v2, People have concern about the use case related to the code change. So add the use case into patch log and document of 'mem=' in kernel-parameters.txt.
Documentation/admin-guide/kernel-parameters.txt | 13 +++++++++++-- mm/memory_hotplug.c | 8 +++++++- 2 files changed, 18 insertions(+), 3 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +11 -2
@@ -2533,13 +2533,22 @@ For details see: Documentation/admin-guide/hw-vuln/mds.rst mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory - Amount of memory to be used when the kernel is not able - to see the whole system memory or for test. + Amount of memory to be used in cases as follows: + + 1 for test; + 2 when the kernel is not able to see the whole system memory; + 3 memory that lies after 'mem=' boundary is excluded from + the hypervisor, then assigned to KVM guests. + [X86] Work as limiting max address. Use together with memmap= to avoid physical address space collisions. Without memmap= PCI devices could be placed at addresses belonging to unused RAM. + Note that this only takes effects during boot time since + in above case 3, memory may need be hot added after boot + if system memory of hypervisor is not sufficient. + mem=nopentium [BUGS=X86-32] Disable usage of 4MB pages for kernel memory.
mm/memory_hotplug.c +7 -1
@@ -105,7 +105,13 @@ static struct resource *register_memory_resource(u64 start, u64 size)unsigned long flags =IORESOURCE_SYSTEM_RAM |IORESOURCE_BUSY ;char *resource_name ="System RAM" ; -if (start + size > max_mem_size) +/* +* Make sure value parsed from 'mem=' only restricts memory adding +* while booting, so that memory hotplug won't be impacted. Please +* refer to document of 'mem=' in kernel-parameters.txt for more +* details. +*/ +if (start + size > max_mem_size && system_state <SYSTEM_RUNNING )return ERR_PTR (-E2BIG );/*
Signature · 1 line
2.17.2
Quoted 20 lines · Baoquan He
In commit
357b4da50a62("x86: respect memory size limiting via mem= parameter") a global varialbemax_mem_sizeis added to store the value parsed from 'mem= ', then checked when memory region is added. This truly stops those DIMMs from being added into system memory during boot-time.However, it also limits the later memory hotplug functionality. Any DIMM can't be hotplugged any more if its region is beyond the
max_mem_size. We will get errors like:[ 216.387164] acpi PNP0C80:02: add_memory failed [ 216.389301] acpi PNP0C80:02: acpi_memory_enable_device() error [ 216.392187] acpi PNP0C80:02: Enumeration failureThis will cause issue in a known use case where 'mem=' is added to the hypervisor. The memory that lies after 'mem=' boundary will be assigned to KVM guests. After commit
357b4da50a62merged, memory can't be extended dynamically if system memory on hypervisor is not sufficient.
Quoted 7 lines
So fix it by also checking if it's during boot-time restricting to add memory. Otherwise, skip the restriction.
And also add this use case to document of 'mem=' kernel parameter.
Fixes 357b4da50a62 ("x86: respect memory size limiting via mem= parameter")Signed-off-by Baoquan He <[email protected]>
Juergen
Quoted 24 lines · Jürgen Groß
Quoted 23 lines · Baoquan He
In commit
357b4da50a62("x86: respect memory size limiting via mem= parameter") a global varialbemax_mem_sizeis added to store the value parsed from 'mem= ', then checked when memory region is added. This truly stops those DIMMs from being added into system memory during boot-time.However, it also limits the later memory hotplug functionality. Any DIMM can't be hotplugged any more if its region is beyond the
max_mem_size. We will get errors like:[ 216.387164] acpi PNP0C80:02: add_memory failed [ 216.389301] acpi PNP0C80:02: acpi_memory_enable_device() error [ 216.392187] acpi PNP0C80:02: Enumeration failureThis will cause issue in a known use case where 'mem=' is added to the hypervisor. The memory that lies after 'mem=' boundary will be assigned to KVM guests. After commit
357b4da50a62merged, memory can't be extended dynamically if system memory on hypervisor is not sufficient.So fix it by also checking if it's during boot-time restricting to add memory. Otherwise, skip the restriction.
Quoted 6 lines
Quoted 4 lines
And also add this use case to document of 'mem=' kernel parameter.
Fixes 357b4da50a62 ("x86: respect memory size limiting via mem= parameter")Signed-off-by Baoquan He <[email protected]>Reviewed-by Juergen Gross <[email protected]>
Thanks, Juergen. Seems I should add more details to explain this. Will post v4 with your 'Reviewed-by'.
Quoted 43 lines · Baoquan He
In commit
357b4da50a62("x86: respect memory size limiting via mem= parameter") a global varialbemax_mem_sizeis added to store the value parsed from 'mem= ', then checked when memory region is added. This truly stops those DIMMs from being added into system memory during boot-time.However, it also limits the later memory hotplug functionality. Any DIMM can't be hotplugged any more if its region is beyond the
max_mem_size. We will get errors like:[ 216.387164] acpi PNP0C80:02: add_memory failed [ 216.389301] acpi PNP0C80:02: acpi_memory_enable_device() error [ 216.392187] acpi PNP0C80:02: Enumeration failureThis will cause issue in a known use case where 'mem=' is added to the hypervisor. The memory that lies after 'mem=' boundary will be assigned to KVM guests. After commit
357b4da50a62merged, memory can't be extended dynamically if system memory on hypervisor is not sufficient.So fix it by also checking if it's during boot-time restricting to add memory. Otherwise, skip the restriction.
And also add this use case to document of 'mem=' kernel parameter.
Fixes 357b4da50a62 ("x86: respect memory size limiting via mem= parameter")Signed-off-by Baoquan He <[email protected]>---
v2->v3:
In discussion of v1 and v2, People have concern about the use case related to the code change. So add the use case into patch log and document of 'mem=' in kernel-parameters.txt.Documentation/admin-guide/kernel-parameters.txt | 13 +++++++++++-- mm/memory_hotplug.c | 8 +++++++- 2 files changed, 18 insertions(+), 3 deletions(-)Documentation/admin-guide/kernel-parameters.txt +0
-0@@ -2533,13 +2533,22 @@ For details see: Documentation/admin-guide/hw-vuln/mds.rst
Documentation/admin-guide/kernel-parameters.txt line 2541
Quoted 10 lines
Documentation/admin-guide/kernel-parameters.txt +6
-2mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory - Amount of memory to be used when the kernel is not able - to see the whole system memory or for test. + Amount of memory to be used in cases as follows: + + 1 for test; + 2 when the kernel is not able to see the whole system memory; + 3 memory that lies after 'mem=' boundary is excluded from + the hypervisor, then assigned to KVM guests.
I remember that there were more use cases, but forgot where that was documented :)
I do wonder if we want to change that now without anybody complaining. Yes, I brought up a possible use case but don't know if it is relevant in practice (IOW, nobody complained yet :) ).
Would like to get Michals opinion on this.
Signature · 3 lines
Thanks, David / dhildenb
Quoted 45 lines · David Hildenbrand
Quoted 44 lines · Baoquan He
In commit
357b4da50a62("x86: respect memory size limiting via mem= parameter") a global varialbemax_mem_sizeis added to store the value parsed from 'mem= ', then checked when memory region is added. This truly stops those DIMMs from being added into system memory during boot-time.However, it also limits the later memory hotplug functionality. Any DIMM can't be hotplugged any more if its region is beyond the
max_mem_size. We will get errors like:[ 216.387164] acpi PNP0C80:02: add_memory failed [ 216.389301] acpi PNP0C80:02: acpi_memory_enable_device() error [ 216.392187] acpi PNP0C80:02: Enumeration failureThis will cause issue in a known use case where 'mem=' is added to the hypervisor. The memory that lies after 'mem=' boundary will be assigned to KVM guests. After commit
357b4da50a62merged, memory can't be extended dynamically if system memory on hypervisor is not sufficient.So fix it by also checking if it's during boot-time restricting to add memory. Otherwise, skip the restriction.
And also add this use case to document of 'mem=' kernel parameter.
Fixes 357b4da50a62 ("x86: respect memory size limiting via mem= parameter")Signed-off-by Baoquan He <[email protected]>---
v2->v3:
In discussion of v1 and v2, People have concern about the use case related to the code change. So add the use case into patch log and document of 'mem=' in kernel-parameters.txt.Documentation/admin-guide/kernel-parameters.txt | 13 +++++++++++-- mm/memory_hotplug.c | 8 +++++++- 2 files changed, 18 insertions(+), 3 deletions(-)Documentation/admin-guide/kernel-parameters.txt +0
-0@@ -2533,13 +2533,22 @@ For details see: Documentation/admin-guide/hw-vuln/mds.rst
Quoted 12 lines
Documentation/admin-guide/kernel-parameters.txt line 2541
Quoted 9 lines
Documentation/admin-guide/kernel-parameters.txt +6
-2mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory - Amount of memory to be used when the kernel is not able - to see the whole system memory or for test. + Amount of memory to be used in cases as follows: + + 1 for test; + 2 when the kernel is not able to see the whole system memory; + 3 memory that lies after 'mem=' boundary is excluded from + the hypervisor, then assigned to KVM guests.I remember that there were more use cases, but forgot where that was documented :)
In fact, as long as it's not used for test, hotplug will be helpful, e.g the 2nd use case. We use 'mem=' to skip these bad part of boot memory DIMMs, while hotplug can help us to extend RAM with good DIMMs. No need to discard the partly broken memmory board.
Quoted 4 lines
I do wonder if we want to change that now without anybody complaining. Yes, I brought up a possible use case but don't know if it is relevant in practice (IOW, nobody complained yet :) ).
Yes, I should hold it a while. Worry it's not clear enough. But in kernel-parameters.txt, I can't write too many details about use case.
Quoted 2 lines
Would like to get Michals opinion on this.
Sure, will hold. Thanks.
Quoted 20 lines · Baoquan He
In commit
357b4da50a62("x86: respect memory size limiting via mem= parameter") a global varialbemax_mem_sizeis added to store the value parsed from 'mem= ', then checked when memory region is added. This truly stops those DIMMs from being added into system memory during boot-time.However, it also limits the later memory hotplug functionality. Any DIMM can't be hotplugged any more if its region is beyond the
max_mem_size. We will get errors like:[ 216.387164] acpi PNP0C80:02: add_memory failed [ 216.389301] acpi PNP0C80:02: acpi_memory_enable_device() error [ 216.392187] acpi PNP0C80:02: Enumeration failureThis will cause issue in a known use case where 'mem=' is added to the hypervisor. The memory that lies after 'mem=' boundary will be assigned to KVM guests. After commit
357b4da50a62merged, memory can't be extended dynamically if system memory on hypervisor is not sufficient.
Quoted 4 lines
So fix it by also checking if it's during boot-time restricting to add memory. Otherwise, skip the restriction.
And also add this use case to document of 'mem=' kernel parameter.
I have to say I am not entirely happy about this change but the breakage seems to be real so we have to live with that. If there are usecases that need to restrict the physical memory range for real we would have to add a new command line parameter.
Quoted 2 lines
Fixes 357b4da50a62 ("x86: respect memory size limiting via mem= parameter")Signed-off-by Baoquan He <[email protected]>
Quoted 60 lines
---
v2->v3:
In discussion of v1 and v2, People have concern about the use case related to the code change. So add the use case into patch log and document of 'mem=' in kernel-parameters.txt.Documentation/admin-guide/kernel-parameters.txt | 13 +++++++++++-- mm/memory_hotplug.c | 8 +++++++- 2 files changed, 18 insertions(+), 3 deletions(-)Documentation/admin-guide/kernel-parameters.txt +11
-2@@ -2533,13 +2533,22 @@ For details see: Documentation/admin-guide/hw-vuln/mds.rst mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory - Amount of memory to be used when the kernel is not able - to see the whole system memory or for test. + Amount of memory to be used in cases as follows: + + 1 for test; + 2 when the kernel is not able to see the whole system memory; + 3 memory that lies after 'mem=' boundary is excluded from + the hypervisor, then assigned to KVM guests. + [X86] Work as limiting max address. Use together with memmap= to avoid physical address space collisions. Without memmap= PCI devices could be placed at addresses belonging to unused RAM. + Note that this only takes effects during boot time since + in above case 3, memory may need be hot added after boot + if system memory of hypervisor is not sufficient. + mem=nopentium [BUGS=X86-32] Disable usage of 4MB pages for kernel memory.mm/memory_hotplug.c +7
-1@@ -105,7 +105,13 @@ static struct resource *register_memory_resource(u64 start, u64 size)unsigned long flags =IORESOURCE_SYSTEM_RAM |IORESOURCE_BUSY ;char *resource_name ="System RAM" ; -if (start + size > max_mem_size) +/* +* Make sure value parsed from 'mem=' only restricts memory adding +* while booting, so that memory hotplug won't be impacted. Please +* refer to document of 'mem=' in kernel-parameters.txt for more +* details. +*/ +if (start + size > max_mem_size && system_state <SYSTEM_RUNNING )return ERR_PTR (-E2BIG );/* Signature · 1 line
2.17.2
Signature · 2 lines
Michal Hocko SUSE Labs