Skip to contentSkip to conversation

TI: AM654/J721e: Add support to boot from OSPI

PATCH New Vignesh Raghavendra 4 participants 16 messages Feb 4, 2020 – Jun 2, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover TI: AM654/J721e: Add support to boot from OSPI

This series adds support to boot from OSPI on TI's AM654 and J721e SoCs. These EVMs have Micron MT35x flash and works in 1-1-8 mode.

v2:
Update READMEs for OSPI boot
Update HS EVM defconfigs to fix build issues

Lokesh Vutla (1):
ARM: mach-k3: sysfw-loader: Use SPI memmapped addr when loading SYSFW

Vignesh Raghavendra (11):
drivers: Descend to drivers/soc unconditionally
ARM: mach-k3: arm64-mmu: map 64bit FSS MMIO space in A53 MMU
ARM: dts: k3-am65: Add OSPI DT nodes
ARM: dts: k3-j721e: Add OSPI DT nodes
configs: am65x_evm: Setup mtdparts for OSPI
configs: j721e_evm: Setup mtdparts for OSPI
configs: j721e_evm_defconfig: Enable OSPI configs
configs: am65x_evm_defconfig: Enable OSPI configs
board: ti: Update AM65x and J721e READMEs for OSPI boot
configs: ama65x_hs_evm: Enable OSPI related configs
configs: j721e_hs_evm: Enable OSPI related configs

 arch/arm/dts/k3-am65-mcu.dtsi                 | 38 +++++++++++++
 arch/arm/dts/k3-am65.dtsi                     | 13 ++++-
 arch/arm/dts/k3-am654-base-board-u-boot.dtsi  | 19 +++++++
 arch/arm/dts/k3-am654-base-board.dts          | 36 ++++++++++++
 arch/arm/dts/k3-am654-r5-base-board.dts       | 39 +++++++++++++
 .../k3-j721e-common-proc-board-u-boot.dtsi    | 16 ++++++
 arch/arm/dts/k3-j721e-common-proc-board.dts   | 33 +++++++++++
 arch/arm/dts/k3-j721e-mcu-wakeup.dtsi         | 31 +++++++++++
 .../arm/dts/k3-j721e-r5-common-proc-board.dts | 39 +++++++++++++
 arch/arm/dts/k3-j721e-som-p0.dtsi             | 36 ++++++++++++
 arch/arm/dts/k3-j721e.dtsi                    |  2 +
 arch/arm/mach-k3/Kconfig                      |  8 +++
 arch/arm/mach-k3/arm64-mmu.c                  |  7 +++
 arch/arm/mach-k3/sysfw-loader.c               | 31 ++++++++++-
 board/ti/am65x/README                         | 55 +++++++++++++++++++
 board/ti/j721e/README                         | 47 ++++++++++++++++
 configs/am65x_evm_a53_defconfig               | 25 +++++++++
 configs/am65x_evm_r5_defconfig                | 17 ++++++
 configs/am65x_hs_evm_a53_defconfig            | 26 +++++++++
 configs/am65x_hs_evm_r5_defconfig             | 19 +++++++
 configs/j721e_evm_a72_defconfig               |  9 ++-
 configs/j721e_evm_r5_defconfig                |  7 +++
 configs/j721e_hs_evm_a72_defconfig            |  8 ++-
 configs/j721e_hs_evm_r5_defconfig             |  7 +++
 drivers/Makefile                              |  3 +-
 include/configs/am65x_evm.h                   | 21 ++++++-
 include/configs/j721e_evm.h                   | 14 ++++-
 27 files changed, 597 insertions(+), 9 deletions(-)
Signature · 1 line
2.25.0
#1 lore raw

PATCH v2 1/12 drivers: Descend to drivers/soc unconditionally

Descend to drivers/soc directory unconditionally for SPL and U-Boot builds. Individual drivers can have their own config to check what needs to be built for SPL. There should be no increase in SPL code size due to this change.

This is required on K3 SoCs to support DMA in SPL.

---
 drivers/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/Makefile +2 -1
index 23501fd74388..420875042896 100644
@@ -107,7 +107,6 @@ obj-y += reset/
 obj-y += input/
 # SOC specific infrastructure drivers.
 obj-y += smem/
-obj-y += soc/
 obj-y += thermal/
 obj-$(CONFIG_TEE) += tee/
 obj-y += axi/
@@ -119,3 +118,5 @@ obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
 obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/
 obj-$(CONFIG_DM_RNG) += rng/
 endif
+
+obj-y += soc/
Signature · 1 line
2.25.0
#2 lore raw

PATCH v2 1/12 drivers: Descend to drivers/soc unconditionally

Hi Tom,

Quoted 33 lines · Vignesh Raghavendra

Descend to drivers/soc directory unconditionally for SPL and U-Boot builds. Individual drivers can have their own config to check what needs to be built for SPL. There should be no increase in SPL code size due to this change.

This is required on K3 SoCs to support DMA in SPL.

---
 drivers/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/Makefile +2 -2
index 23501fd74388..420875042896 100644
@@ -107,7 +107,6 @@ obj-y += reset/
 obj-y += input/
 # SOC specific infrastructure drivers.
 obj-y += smem/
-obj-y += soc/
 obj-y += thermal/
 obj-$(CONFIG_TEE) += tee/
 obj-y += axi/
@@ -119,3 +118,5 @@ obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
 obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/
 obj-$(CONFIG_DM_RNG) += rng/
 endif
+
+obj-y += soc/
--
Quoted 2 lines

2.25.0

Oddly enough this commit seems to fix the problems with my rpi3, so mainline is working again now.

Regards,
Simon

#3 lore raw

PATCH v2 2/12 ARM: mach-k3: arm64-mmu: map 64bit FSS MMIO space in A53 MMU

In reply to Vignesh Raghavendra

Populate address mapping entries in A53 MMU for 4 GB of MMIO space reserved for providing MMIO access to multiple flash devices through OSPI/HBMC IPs within FSS.

---
 arch/arm/mach-k3/arm64-mmu.c | 7 +++++++
 1 file changed, 7 insertions(+)
arch/arm/mach-k3/arm64-mmu.c +7 -0
index 7f908eee803b..b1d1d6e494fc 100644
@@ -49,6 +49,13 @@ struct mm_region am654_mem_map[NR_MMU_REGIONS] = {
 		.size = 0x80000000UL,
 		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
 			 PTE_BLOCK_INNER_SHARE
+	}, {
+		.virt = 0x500000000UL,
+		.phys = 0x500000000UL,
+		.size = 0x400000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	}, {
 		/* List terminator */
 		0,
Signature · 1 line
2.25.0
#4 lore raw

PATCH v2 3/12 ARM: mach-k3: sysfw-loader: Use SPI memmapped addr when loading SYSFW

In reply to Vignesh Raghavendra

From: Lokesh Vutla <[email protected]>

Since ROM configures OSPI controller to be in memory mapped mode in OSPI boot, R5 SPL can directly pass the memory mapped pointer to ROM. With this ROM can directly pull the SYSFW image from OSPI.

---
 arch/arm/mach-k3/Kconfig        |  8 ++++++++
 arch/arm/mach-k3/sysfw-loader.c | 31 ++++++++++++++++++++++++++++++-
 2 files changed, 38 insertions(+), 1 deletion(-)
arch/arm/mach-k3/Kconfig +8 -0
index 2e111bbf27ee..c98a5c66749f 100644
@@ -126,6 +126,14 @@ config K3_SYSFW_IMAGE_SIZE_MAX
 	  tree blob. Keep it as tight as possible, as this directly affects the
 	  overall SPL memory footprint.
 
+config K3_SYSFW_IMAGE_SPI_OFFS
+	hex "SPI offset of SYSFW firmware and configuration blob"
+	depends on K3_LOAD_SYSFW
+	default	0x6C0000
+	help
+	  Offset of the combined System Firmware and configuration image tree
+	  blob to be loaded when booting from a SPI flash memory.
+
 config SYS_K3_SPL_ATF
 	bool "Start Cortex-A from SPL"
 	depends on SPL && CPU_V7R
arch/arm/mach-k3/sysfw-loader.c +30 -1
index 94dbeb9437d9..3677a37f55a2 100644
@@ -14,6 +14,8 @@
 #include <g_dnl.h>
 #include <usb.h>
 #include <dfu.h>
+#include <dm/uclass-internal.h>
+#include <spi_flash.h>
 
 #include <asm/arch/sys_proto.h>
 #include "common.h"
@@ -197,12 +199,32 @@ exit:
 }
 #endif
 
+#if CONFIG_IS_ENABLED(SPI_LOAD)
+static void *k3_sysfw_get_spi_addr(void)
+{
+	struct udevice *dev;
+	fdt_addr_t addr;
+	int ret;
+
+	ret = uclass_find_device_by_seq(UCLASS_SPI, CONFIG_SF_DEFAULT_BUS,
+					true, &dev);
+	if (ret)
+		return NULL;
+
+	addr = dev_read_addr_index(dev, 1);
+	if (addr == FDT_ADDR_T_NONE)
+		return NULL;
+
+	return (void *)(addr + CONFIG_K3_SYSFW_IMAGE_SPI_OFFS);
+}
+#endif
+
 void k3_sysfw_loader(void (*config_pm_done_callback)(void))
 {
 	struct spl_image_info spl_image = { 0 };
 	struct spl_boot_device bootdev = { 0 };
 	struct ti_sci_handle *ti_sci;
-	int ret;
+	int ret = 0;
 
 	/* Reserve a block of aligned memory for loading the SYSFW image */
 	sysfw_load_address = memalign(ARCH_DMA_MINALIGN,
@@ -243,6 +265,13 @@ void k3_sysfw_loader(void (*config_pm_done_callback)(void))
 #endif
 		break;
 #endif
+#if CONFIG_IS_ENABLED(SPI_LOAD)
+	case BOOT_DEVICE_SPI:
+		sysfw_load_address = k3_sysfw_get_spi_addr();
+		if (!sysfw_load_address)
+			ret = -ENODEV;
+		break;
+#endif
 #if CONFIG_IS_ENABLED(YMODEM_SUPPORT)
 	case BOOT_DEVICE_UART:
 #ifdef CONFIG_K3_EARLY_CONS
Signature · 1 line
2.25.0
#5 lore raw

PATCH v2 4/12 ARM: dts: k3-am65: Add OSPI DT nodes

In reply to Vignesh Raghavendra

Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support OSPI boot.

---
 arch/arm/dts/k3-am65-mcu.dtsi                | 38 +++++++++++++++++++
 arch/arm/dts/k3-am65.dtsi                    | 13 ++++++-
 arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 19 ++++++++++
 arch/arm/dts/k3-am654-base-board.dts         | 36 ++++++++++++++++++
 arch/arm/dts/k3-am654-r5-base-board.dts      | 39 ++++++++++++++++++++
 5 files changed, 143 insertions(+), 2 deletions(-)
arch/arm/dts/k3-am65-mcu.dtsi +38 -0
index c42e7553c78f..bc9a87210da9 100644
@@ -64,4 +64,42 @@
 			loczrama = <1>;
 		};
 	};
+
+	fss: fss at 47000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi at 47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47040000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 248 0>;
+			assigned-clocks = <&k3_clks 248 0>;
+			assigned-clock-parents = <&k3_clks 248 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ospi1: spi at 47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47050000 0x0 0x100>,
+				<0x7 0x00000000 0x1 0x00000000>;
+			interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 249 6>;
+			power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
 };
arch/arm/dts/k3-am65.dtsi +11 -2
index 3ead944640a3..3d89bf32a9d1 100644
@@ -30,6 +30,8 @@
 		i2c3 = &main_i2c1;
 		i2c4 = &main_i2c2;
 		i2c5 = &main_i2c3;
+		spi0 = &ospi0;
+		spi1 = &ospi1;
 	};
 
 	chosen { };
@@ -79,7 +81,11 @@
 			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
 			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
 			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
-			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>;
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
 
 		cbass_mcu: interconnect at 28380000 {
 			compatible = "simple-bus";
@@ -93,7 +99,10 @@
 				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
 				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
 				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
-				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /*  FSS OSPI0 data region 1 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
 
 			cbass_wakeup: interconnect at 42040000 {
 				compatible = "simple-bus";
arch/arm/dts/k3-am654-base-board-u-boot.dtsi +19 -0
index a349edcfa5fd..2cbe69ed1504 100644
@@ -43,6 +43,7 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+		u-boot,dm-spl;
 
 		ti,sci-dev-id = <119>;
 
@@ -59,6 +60,7 @@
 			ti,dma-ring-reset-quirk;
 			ti,sci = <&dmsc>;
 			ti,sci-dev-id = <195>;
+			u-boot,dm-spl;
 		};
 
 		mcu_udmap: udmap at 285c0000 {
@@ -81,6 +83,7 @@
 						<0x4>; /* RX_CHAN */
 			ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */
 			dma-coherent;
+			u-boot,dm-spl;
 		};
 	};
 
@@ -305,6 +308,10 @@
 			AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
 		>;
 	};
+
+	mcu-fss0-ospi0-pins-default {
+		u-boot,dm-spl;
+	};
 };
 
 &main_uart0 {
@@ -365,3 +372,15 @@
 &usb1 {
 	dr_mode = "peripheral";
 };
+
+&fss {
+	u-boot,dm-spl;
+};
+
+&ospi0 {
+	u-boot,dm-spl;
+
+	 flash at 0{
+		u-boot,dm-spl;
+	};
+};
arch/arm/dts/k3-am654-base-board.dts +36 -0
index 7ebbf1786255..375f1d089c7d 100644
@@ -73,6 +73,22 @@
 			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
 		>;
 	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0)	 /* (U2) MCU_OSPI0_DQS */
+			AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* (U4) MCU_OSPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* (U5) MCU_OSPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* (T2) MCU_OSPI0_D2 */
+			AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* (T3) MCU_OSPI0_D3 */
+			AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* (T4) MCU_OSPI0_D4 */
+			AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* (T5) MCU_OSPI0_D5 */
+			AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* (R2) MCU_OSPI0_D6 */
+			AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* (R3) MCU_OSPI0_D7 */
+			AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
+		>;
+	};
 };
 
 &sdhci0 {
@@ -117,3 +133,23 @@
 &usb0_phy {
 	status = "disabled";
 };
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash at 0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
arch/arm/dts/k3-am654-r5-base-board.dts +39 -0
index 5d5689d28496..257b56a1b032 100644
@@ -179,6 +179,22 @@
 			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
 		>;
 	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0)	 /* (U2) MCU_OSPI0_DQS */
+			AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* (U4) MCU_OSPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* (U5) MCU_OSPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* (T2) MCU_OSPI0_D2 */
+			AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* (T3) MCU_OSPI0_D3 */
+			AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* (T4) MCU_OSPI0_D4 */
+			AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* (T5) MCU_OSPI0_D5 */
+			AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* (R2) MCU_OSPI0_D6 */
+			AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* (R3) MCU_OSPI0_D7 */
+			AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
+		>;
+	};
 };
 
 &main_pmx0 {
@@ -239,3 +255,26 @@
 		u-boot,dm-spl;
 	};
 };
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	reg = <0x0 0x47040000 0x0 0x100>,
+	      <0x0 0x50000000 0x0 0x8000000>;
+
+	flash at 0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
Signature · 1 line
2.25.0
#6 lore raw

PATCH v2 5/12 ARM: dts: k3-j721e: Add OSPI DT nodes

In reply to Vignesh Raghavendra

Add OSPI DT nodes to enable OSPI at U-Boot prompt and also to support OSPI boot.

---
 .../k3-j721e-common-proc-board-u-boot.dtsi    | 16 ++++++++
 arch/arm/dts/k3-j721e-common-proc-board.dts   | 33 ++++++++++++++++
 arch/arm/dts/k3-j721e-mcu-wakeup.dtsi         | 31 +++++++++++++++
 .../arm/dts/k3-j721e-r5-common-proc-board.dts | 39 +++++++++++++++++++
 arch/arm/dts/k3-j721e-som-p0.dtsi             | 36 +++++++++++++++++
 arch/arm/dts/k3-j721e.dtsi                    |  2 +
 6 files changed, 157 insertions(+)
arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi +16 -0
index a3a81932168e..d422100d42c5 100644
@@ -349,3 +349,19 @@
 &exp2 {
 	u-boot,dm-spl;
 };
+
+&mcu_fss0_ospi0_pins_default {
+	u-boot,dm-spl;
+};
+
+&fss {
+	u-boot,dm-spl;
+};
+
+&ospi0 {
+	u-boot,dm-spl;
+
+	flash at 0 {
+		u-boot,dm-spl;
+	};
+};
arch/arm/dts/k3-j721e-common-proc-board.dts +33 -0
index d216b707fd2c..496a15e1d1ac 100644
@@ -123,6 +123,19 @@
 			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
 		>;
 	};
+
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
+			J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
+			J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
+			J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
+			J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
+			J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
+			J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
+		>;
+	};
 };
 
 &usbss0 {
@@ -172,3 +185,23 @@
 		#gpio-cells = <2>;
 	};
 };
+
+&ospi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+	flash at 0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
arch/arm/dts/k3-j721e-mcu-wakeup.dtsi +31 -0
index fe52fd1b2f9f..a9e97f219bd0 100644
@@ -143,6 +143,37 @@
 			assigned-clocks = <&k3_clks 102 0>;
 			assigned-clock-rates = <250000000>;
 		};
+
+		ospi0: spi at 47040000 {
+			compatible = "ti,am654-ospi";
+			reg = <0x0 0x47040000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 103 0>;
+			assigned-clocks = <&k3_clks 103 0>;
+			assigned-clock-parents = <&k3_clks 103 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ospi1: spi at 47050000 {
+			compatible = "ti,am654-ospi";
+			reg = <0x0 0x47050000 0x0 0x100>,
+				<0x7 0x00000000 0x1 0x00000000>;
+			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 104 0>;
+			power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
 
 	mcu_i2c0: i2c at 40b00000 {
arch/arm/dts/k3-j721e-r5-common-proc-board.dts +39 -0
index 1f14d71438b4..d243208c0b11 100644
@@ -107,6 +107,22 @@
 			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
 		>;
 	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
+			J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0)  /* MCU_OSPI0_DQS */
+			J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* MCU_OSPI0_D0 */
+			J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* MCU_OSPI0_D1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* MCU_OSPI0_D2 */
+			J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* MCU_OSPI0_D3 */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* MCU_OSPI0_D4 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* MCU_OSPI0_D5 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* MCU_OSPI0_D6 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* MCU_OSPI0_D7 */
+			J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
+		>;
+	};
 };
 
 &main_pmx0 {
@@ -252,4 +268,27 @@
 	};
 };
 
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	reg = <0x0 0x47040000 0x0 0x100>,
+	      <0x0 0x50000000 0x0 0x8000000>;
+
+	flash at 0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
 #include "k3-j721e-common-proc-board-u-boot.dtsi"
arch/arm/dts/k3-j721e-som-p0.dtsi +36 -0
index 1e1519f1c900..8497ff3e3e12 100644
@@ -47,6 +47,22 @@
 			J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (G21) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */
 		>;
 	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
+			J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0)  /* MCU_OSPI0_DQS */
+			J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* MCU_OSPI0_D0 */
+			J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* MCU_OSPI0_D1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* MCU_OSPI0_D2 */
+			J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* MCU_OSPI0_D3 */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* MCU_OSPI0_D4 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* MCU_OSPI0_D5 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* MCU_OSPI0_D6 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* MCU_OSPI0_D7 */
+			J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
+		>;
+	};
 };
 
 &hbmc {
@@ -61,3 +77,23 @@
 		reg = <0x0 0x0 0x4000000>;
 	};
 };
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash at 0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
arch/arm/dts/k3-j721e.dtsi +2 -0
index 68ba517e5009..04137b99486c 100644
@@ -40,6 +40,8 @@
 		i2c7 = &main_i2c4;
 		i2c8 = &main_i2c5;
 		i2c9 = &main_i2c6;
+		spi0 = &ospi0;
+		spi1 = &ospi1;
 	};
 
 	chosen { };
Signature · 1 line
2.25.0
#7 lore raw

PATCH v2 6/12 configs: am65x_evm: Setup mtdparts for OSPI

In reply to Vignesh Raghavendra

Set up mtdparts cmdline argument to be passed to kernel

---
 include/configs/am65x_evm.h | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)
include/configs/am65x_evm.h +20 -1
index 7d7f86a0598a..4e095342c0b3 100644
@@ -73,7 +73,8 @@
 	"name_kern=Image\0"						\
 	"console=ttyS2,115200n8\0"					\
 	"stdin=serial,usbkbd\0"						\
-	"args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \
+	"args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 "  \
+		"${mtdparts}\0"						\
 	"run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"		\
 
 /* U-Boot MMC-specific configuration */
@@ -106,6 +107,22 @@
 		"0 /lib/firmware/am65x-mcu-r5f0_0-fw "			\
 		"1 /lib/firmware/am65x-mcu-r5f0_1-fw "
 
+#ifdef CONFIG_TARGET_AM654_A53_EVM
+#define EXTRA_ENV_AM65X_BOARD_SETTINGS_MTD				\
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"				\
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
+#else
+#define EXTRA_ENV_AM65X_BOARD_SETTINGS_MTD
+#endif
+
+#define EXTRA_ENV_AM65X_BOARD_SETTINGS_UBI				\
+	"init_ubi=run args_all args_ubi; sf probe; "			\
+		"ubi part ospi.rootfs; ubifsmount ubi:rootfs;\0"	\
+	"get_kern_ubi=ubifsload ${loadaddr} ${bootdir}/${name_kern}\0"	\
+	"get_fdt_ubi=ubifsload ${fdtaddr} ${bootdir}/${name_fdt}\0"	\
+	"args_ubi=setenv bootargs console=${console} ${optargs} "	\
+		"rootfstype=ubifs root=ubi0:rootfs rw ubi.mtd=ospi.rootfs\0"
+
 #define EXTRA_ENV_DFUARGS						\
 	"dfu_bufsiz=0x20000\0"						\
 	DFU_ALT_INFO_MMC						\
@@ -118,6 +135,8 @@
 	DEFAULT_FIT_TI_ARGS						\
 	EXTRA_ENV_AM65X_BOARD_SETTINGS					\
 	EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC				\
+	EXTRA_ENV_AM65X_BOARD_SETTINGS_MTD				\
+	EXTRA_ENV_AM65X_BOARD_SETTINGS_UBI				\
 	EXTRA_ENV_RPROC_SETTINGS					\
 	EXTRA_ENV_DFUARGS
 
Signature · 1 line
2.25.0
#8 lore raw

PATCH v2 7/12 configs: j721e_evm: Setup mtdparts for OSPI

In reply to Vignesh Raghavendra

Set up mtdparts cmdline argument to be passed to kernel

---
 include/configs/j721e_evm.h | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
include/configs/j721e_evm.h +12 -2
index 4371c471e5a9..0f8a9739a13f 100644
@@ -74,7 +74,8 @@
 	"overlayaddr=0x83000000\0"					\
 	"name_kern=Image\0"						\
 	"console=ttyS2,115200n8\0"					\
-	"args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \
+	"args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 "	\
+		"${mtdparts}\0"						\
 	"run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
 
 #define PARTS_DEFAULT \
@@ -124,6 +125,14 @@
 	DFU_ALT_INFO_RAM \
 	DFU_ALT_INFO_OSPI
 
+#ifdef CONFIG_TARGET_J721E_A72_EVM
+#define EXTRA_ENV_J721E_BOARD_SETTINGS_MTD				\
+	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"				\
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
+#else
+#define EXTRA_ENV_J721E_BOARD_SETTINGS_MTD
+#endif
+
 /* Incorporate settings into the U-Boot environment */
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	DEFAULT_MMC_TI_ARGS						\
@@ -132,7 +141,8 @@
 	EXTRA_ENV_J721E_BOARD_SETTINGS_MMC				\
 	EXTRA_ENV_RPROC_SETTINGS					\
 	EXTRA_ENV_DFUARGS						\
-	DEFAULT_UFS_TI_ARGS
+	DEFAULT_UFS_TI_ARGS						\
+	EXTRA_ENV_J721E_BOARD_SETTINGS_MTD
 
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>
Signature · 1 line
2.25.0
#9 lore raw

PATCH v2 8/12 configs: j721e_evm_defconfig: Enable OSPI configs

In reply to Vignesh Raghavendra

Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot

---
 configs/j721e_evm_a72_defconfig | 9 ++++++++-
 configs/j721e_evm_r5_defconfig  | 7 +++++++
 2 files changed, 15 insertions(+), 1 deletion(-)
configs/j721e_evm_a72_defconfig +8 -1
index 8355abbaa7f2..581a4c45402b 100644
@@ -27,6 +27,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_DM_MAILBOX=y
@@ -35,6 +36,8 @@ CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
 CONFIG_SPL_USB_GADGET=y
@@ -56,7 +59,8 @@ CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_MTDIDS_DEFAULT="nor0=47040000.spi.0,nor0=47034000.hyperbus"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),1m(hbmc.sysfw),- at 8m(hbmc.rootfs)"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),- at 8m(ospi.rootfs);47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),1m(hbmc.sysfw),- at 8m(hbmc.rootfs)"
+CONFIG_CMD_UBI=y
 # CONFIG_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
@@ -113,7 +117,10 @@ CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_HBMC_AM654=y
 CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT
 CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_TI=y
 CONFIG_PHY_FIXED=y
 CONFIG_DM_ETH=y
configs/j721e_evm_r5_defconfig +7 -0
index 19fbd450c754..d31c116aa695 100644
@@ -25,6 +25,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_EARLY_BSS=y
+CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_DM_MAILBOX=y
@@ -34,6 +35,8 @@ CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
 CONFIG_SPL_USB_GADGET=y
@@ -64,6 +67,8 @@ CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_TI_SCI=y
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_DA8XX_GPIO=y
 CONFIG_DM_PCA953X=y
@@ -81,6 +86,7 @@ CONFIG_SPL_MMC_SDHCI_ADMA=y
 CONFIG_MMC_SDHCI_AM654=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_GENERIC is not set
@@ -99,6 +105,7 @@ CONFIG_REMOTEPROC_TI_K3_ARM64=y
 CONFIG_DM_RESET=y
 CONFIG_RESET_TI_SCI=y
 CONFIG_DM_SERIAL=y
+CONFIG_SOC_TI=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_CADENCE_QSPI=y
Signature · 1 line
2.25.0
#10 lore raw

PATCH v2 9/12 configs: am65x_evm_defconfig: Enable OSPI configs

In reply to Vignesh Raghavendra

Enable OSPI related defconfigs. Also enable SPL_DMA so that DMA is used during OSPI boot

---
 configs/am65x_evm_a53_defconfig | 25 +++++++++++++++++++++++++
 configs/am65x_evm_r5_defconfig  | 17 +++++++++++++++++
 2 files changed, 42 insertions(+)
configs/am65x_evm_a53_defconfig +25 -0
index 079cd912ba34..f175d20a66c0 100644
@@ -15,6 +15,8 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_SPL_TEXT_BASE=0x80080000
 CONFIG_DISTRO_DEFAULTS=y
@@ -28,10 +30,17 @@ CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
+CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_DFU=y
@@ -40,9 +49,13 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
+CONFIG_MTDIDS_DEFAULT="nor0=47040000.spi.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),- at 8m(ospi.rootfs)"
+CONFIG_CMD_UBI=y
 # CONFIG_ISO_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
@@ -58,11 +71,13 @@ CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPL_REGMAP=y
+CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_TI_SCI=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
 CONFIG_DMA_CHANNELS=y
 CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
@@ -78,6 +93,13 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ADMA=y
 CONFIG_SPL_MMC_SDHCI_ADMA=y
 CONFIG_MMC_SDHCI_AM654=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_TI=y
 CONFIG_PHY_FIXED=y
 CONFIG_DM_ETH=y
@@ -102,6 +124,9 @@ CONFIG_DM_RESET=y
 CONFIG_RESET_TI_SCI=y
 CONFIG_DM_SERIAL=y
 CONFIG_SOC_TI=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_TI_SCI=y
configs/am65x_evm_r5_defconfig +17 -0
index 69055d553609..4dc5f384e7dd 100644
@@ -16,6 +16,8 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_SPL_TEXT_BASE=0x41c00000
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
@@ -26,6 +28,7 @@ CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
+CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_RESET=y
@@ -34,6 +37,10 @@ CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
@@ -63,6 +70,8 @@ CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_TI_SCI=y
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_DA8XX_GPIO=y
 CONFIG_DM_I2C=y
@@ -76,6 +85,10 @@ CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_SPL_MMC_SDHCI_ADMA=y
 CONFIG_MMC_SDHCI_AM654=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_GENERIC is not set
 CONFIG_SPL_PINCTRL=y
@@ -95,6 +108,10 @@ CONFIG_REMOTEPROC_TI_K3_ARM64=y
 CONFIG_DM_RESET=y
 CONFIG_RESET_TI_SCI=y
 CONFIG_DM_SERIAL=y
+CONFIG_SOC_TI=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_TI_SCI=y
Signature · 1 line
2.25.0
#11 lore raw

PATCH v2 10/12 board: ti: Update AM65x and J721e READMEs for OSPI boot

In reply to Vignesh Raghavendra

Update AM65x and J721e README files with instructions for flashing OSPI images.

---
 board/ti/am65x/README | 55 +++++++++++++++++++++++++++++++++++++++++++
 board/ti/j721e/README | 47 ++++++++++++++++++++++++++++++++++++
 2 files changed, 102 insertions(+)
board/ti/am65x/README +55 -0
index 2e3fd9c4a810..86868e8c705f 100644
@@ -262,6 +262,61 @@ To boot kernel from eMMC, use the following commands:
 => setenv bootpart 0
 => boot
 
+OSPI:
+-----
+ROM supports booting from OSPI from offset 0x0.
+
+Flashing images to OSPI:
+
+Below commands can be used to download tiboot3.bin, tispl.bin, u-boot.img,
+and sysfw.itb over tftp and then flash those to OSPI at their respective
+addresses.
+
+=> sf probe
+=> tftp ${loadaddr} tiboot3.bin
+=> sf update $loadaddr 0x0 $filesize
+=> tftp ${loadaddr} tispl.bin
+=> sf update $loadaddr 0x80000 $filesize
+=> tftp ${loadaddr} u-boot.img
+=> sf update $loadaddr 0x280000 $filesize
+=> tftp ${loadaddr} sysfw.itb
+=> sf update $loadaddr 0x6C0000 $filesize
+
+Flash layout for OSPI:
+
+         0x0 +----------------------------+
+             |     ospi.tiboot3(512K)     |
+             |                            |
+     0x80000 +----------------------------+
+             |     ospi.tispl(2M)         |
+             |                            |
+    0x280000 +----------------------------+
+             |     ospi.u-boot(4M)        |
+             |                            |
+    0x680000 +----------------------------+
+             |     ospi.env(128K)         |
+             |                            |
+    0x6A0000 +----------------------------+
+	     |	 ospi.env.backup (128K)   |
+	     |                            |
+    0x6C0000 +----------------------------+
+             |      ospi.sysfw(1M)        |
+             |                            |
+    0x7C0000 +----------------------------+
+	     |      padding (256k)        |
+    0x800000 +----------------------------+
+             |     ospi.rootfs(UBIFS)     |
+             |                            |
+             +----------------------------+
+
+Kernel Image and DT are expected to be present in the /boot folder of UBIFS
+ospi.rootfs just like in SD card case. U-Boot looks for UBI volume named
+"rootfs" for rootfs.
+
+To boot kernel from OSPI, at the U-Boot prompt:
+=> setenv boot ubi
+=> boot
+
 UART:
 -----
 ROM supports booting from MCU_UART0 via X-Modem protocol. The entire UART-based
board/ti/j721e/README +47 -0

50 lines not on this page · raw message

Signature · 1 line
2.25.0
#12 lore raw

PATCH v2 11/12 configs: ama65x_hs_evm: Enable OSPI related configs

In reply to Vignesh Raghavendra

Enable OSPI related defconfigs for AM65x HS variant.

---
 configs/am65x_hs_evm_a53_defconfig | 26 ++++++++++++++++++++++++++
 configs/am65x_hs_evm_r5_defconfig  | 19 +++++++++++++++++++
 2 files changed, 45 insertions(+)
configs/am65x_hs_evm_a53_defconfig +26 -0
index 6097a0224718..29d9f2b16873 100644
@@ -15,6 +15,8 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_SPL_TEXT_BASE=0x80080000
 CONFIG_DISTRO_DEFAULTS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
@@ -28,16 +30,26 @@ CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
+CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
+CONFIG_MTDIDS_DEFAULT="nor0=47040000.spi.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),- at 8m(ospi.rootfs)"
+CONFIG_CMD_UBI=y
 # CONFIG_ISO_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
@@ -52,6 +64,8 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_TI_SCI=y
@@ -66,6 +80,15 @@ CONFIG_DM_MAILBOX=y
 CONFIG_K3_SEC_PROXY=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ADMA=y
+CONFIG_SPL_MMC_SDHCI_ADMA=y
+CONFIG_MMC_SDHCI_AM654=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_GENERIC is not set
 CONFIG_SPL_PINCTRL=y
@@ -77,6 +100,9 @@ CONFIG_DM_RESET=y
 CONFIG_RESET_TI_SCI=y
 CONFIG_DM_SERIAL=y
 CONFIG_SOC_TI=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_TI_SCI=y
configs/am65x_hs_evm_r5_defconfig +19 -0
index 0cdfc735b6ac..91178f87219d 100644
@@ -16,6 +16,8 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_SPL_TEXT_BASE=0x41c00000
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
@@ -27,6 +29,7 @@ CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
+CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_RESET=y
@@ -35,6 +38,10 @@ CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
@@ -58,10 +65,14 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_TI_SCI=y
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_DA8XX_GPIO=y
 CONFIG_DM_I2C=y
@@ -72,6 +83,10 @@ CONFIG_K3_SEC_PROXY=y
 CONFIG_MISC=y
 CONFIG_DM_MMC=y
 CONFIG_MMC_SDHCI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_GENERIC is not set
 CONFIG_SPL_PINCTRL=y
@@ -90,6 +105,10 @@ CONFIG_REMOTEPROC_TI_K3_ARM64=y
 CONFIG_DM_RESET=y
 CONFIG_RESET_TI_SCI=y
 CONFIG_DM_SERIAL=y
+CONFIG_SOC_TI=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_TI_SCI=y
Signature · 1 line
2.25.0
#13 lore raw

PATCH v2 12/12 configs: j721e_hs_evm: Enable OSPI related configs

In reply to Vignesh Raghavendra

Enable OSPI related configs for J721e HS variant.

---
 configs/j721e_hs_evm_a72_defconfig | 8 +++++++-
 configs/j721e_hs_evm_r5_defconfig  | 7 +++++++
 2 files changed, 14 insertions(+), 1 deletion(-)
configs/j721e_hs_evm_a72_defconfig +7 -1
index dd552c5d1a22..ef8e1fb50eb6 100644
@@ -35,6 +35,8 @@ CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SPL_POWER_DOMAIN=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
 CONFIG_SPL_YMODEM_SUPPORT=y
@@ -53,7 +55,8 @@ CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_MTDIDS_DEFAULT="nor0=47040000.spi.0,nor0=47034000.hyperbus"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),1m(hbmc.sysfw),- at 8m(hbmc.rootfs)"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),- at 8m(ospi.rootfs);47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),1m(hbmc.sysfw),- at 8m(hbmc.rootfs)"
+CONFIG_CMD_UBI=y
 # CONFIG_ISO_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_OF_CONTROL=y
@@ -107,7 +110,10 @@ CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_HBMC_AM654=y
 CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT
 CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHY_TI=y
 CONFIG_PHY_FIXED=y
 CONFIG_DM_ETH=y
configs/j721e_hs_evm_r5_defconfig +7 -0
index 9348be332012..784b51b1d2aa 100644
@@ -27,6 +27,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_EARLY_BSS=y
+CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_DM_MAILBOX=y
@@ -36,6 +37,8 @@ CONFIG_SPL_POWER_DOMAIN=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
 CONFIG_SPL_YMODEM_SUPPORT=y
@@ -63,6 +66,8 @@ CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_TI_SCI=y
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_DA8XX_GPIO=y
 CONFIG_DM_I2C=y
@@ -79,6 +84,7 @@ CONFIG_SPL_MMC_SDHCI_ADMA=y
 CONFIG_MMC_SDHCI_AM654=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_GENERIC is not set
@@ -97,6 +103,7 @@ CONFIG_REMOTEPROC_TI_K3_ARM64=y
 CONFIG_DM_RESET=y
 CONFIG_RESET_TI_SCI=y
 CONFIG_DM_SERIAL=y
+CONFIG_SOC_TI=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_CADENCE_QSPI=y
Signature · 1 line
2.25.0
#14 lore raw

v2 cover TI: AM654/J721e: Add support to boot from OSPI

In reply to Vignesh Raghavendra

Vignesh,

Quoted 6 lines · Vignesh Raghavendra

This series adds support to boot from OSPI on TI's AM654 and J721e SoCs. These EVMs have Micron MT35x flash and works in 1-1-8 mode.

v2:
Update READMEs for OSPI boot
Update HS EVM defconfigs to fix build issues

thanks for the README updates! I re-looked through all the patches once more, hence for the entire series:

--
Andreas Dannenberg
Texas Instruments Inc

Quoted 49 lines

Lokesh Vutla (1):
ARM: mach-k3: sysfw-loader: Use SPI memmapped addr when loading SYSFW

Vignesh Raghavendra (11):
drivers: Descend to drivers/soc unconditionally
ARM: mach-k3: arm64-mmu: map 64bit FSS MMIO space in A53 MMU
ARM: dts: k3-am65: Add OSPI DT nodes
ARM: dts: k3-j721e: Add OSPI DT nodes
configs: am65x_evm: Setup mtdparts for OSPI
configs: j721e_evm: Setup mtdparts for OSPI
configs: j721e_evm_defconfig: Enable OSPI configs
configs: am65x_evm_defconfig: Enable OSPI configs
board: ti: Update AM65x and J721e READMEs for OSPI boot
configs: ama65x_hs_evm: Enable OSPI related configs
configs: j721e_hs_evm: Enable OSPI related configs

 arch/arm/dts/k3-am65-mcu.dtsi                 | 38 +++++++++++++
 arch/arm/dts/k3-am65.dtsi                     | 13 ++++-
 arch/arm/dts/k3-am654-base-board-u-boot.dtsi  | 19 +++++++
 arch/arm/dts/k3-am654-base-board.dts          | 36 ++++++++++++
 arch/arm/dts/k3-am654-r5-base-board.dts       | 39 +++++++++++++
 .../k3-j721e-common-proc-board-u-boot.dtsi    | 16 ++++++
 arch/arm/dts/k3-j721e-common-proc-board.dts   | 33 +++++++++++
 arch/arm/dts/k3-j721e-mcu-wakeup.dtsi         | 31 +++++++++++
 .../arm/dts/k3-j721e-r5-common-proc-board.dts | 39 +++++++++++++
 arch/arm/dts/k3-j721e-som-p0.dtsi             | 36 ++++++++++++
 arch/arm/dts/k3-j721e.dtsi                    |  2 +
 arch/arm/mach-k3/Kconfig                      |  8 +++
 arch/arm/mach-k3/arm64-mmu.c                  |  7 +++
 arch/arm/mach-k3/sysfw-loader.c               | 31 ++++++++++-
 board/ti/am65x/README                         | 55 +++++++++++++++++++
 board/ti/j721e/README                         | 47 ++++++++++++++++
 configs/am65x_evm_a53_defconfig               | 25 +++++++++
 configs/am65x_evm_r5_defconfig                | 17 ++++++
 configs/am65x_hs_evm_a53_defconfig            | 26 +++++++++
 configs/am65x_hs_evm_r5_defconfig             | 19 +++++++
 configs/j721e_evm_a72_defconfig               |  9 ++-
 configs/j721e_evm_r5_defconfig                |  7 +++
 configs/j721e_hs_evm_a72_defconfig            |  8 ++-
 configs/j721e_hs_evm_r5_defconfig             |  7 +++
 drivers/Makefile                              |  3 +-
 include/configs/am65x_evm.h                   | 21 ++++++-
 include/configs/j721e_evm.h                   | 14 ++++-
 27 files changed, 597 insertions(+), 9 deletions(-)
Signature · 1 line
2.25.0
#15 lore raw

v2 cover TI: AM654/J721e: Add support to boot from OSPI

In reply to Vignesh Raghavendra
Quoted 6 lines · Vignesh Raghavendra

This series adds support to boot from OSPI on TI's AM654 and J721e SoCs. These EVMs have Micron MT35x flash and works in 1-1-8 mode.

v2:
Update READMEs for OSPI boot
Update HS EVM defconfigs to fix build issues

Series applied to u-boot-ti next branch.

Thanks and regards,
Lokesh