Skip to contentSkip to conversation

Improvements to systemd

PATCH New Norbert Lange 3 participants 40 messages Feb 6, 2020 – Jun 8, 2020 Kbuild

lore
Share & tools
lore
#0 lore raw

cover Improvements to systemd

Hello,

this contains several cleanups ond improvements on systemd, it replaces old patches [1] and [2], including the requested changes.

1. allow the hook to operate on files added from an overlay
2. hooks libnss-systemd into the rootfs (so that DynamicUser
option works correctly)
3. and following: update and improve user accounts

     (depends on 2.)

7. and following: support systemd catalog files
9. run systemd-tmpfiles in fakeroot step

[1] - https://patchwork.ozlabs.org/patch/1222103/
[2] - https://patchwork.ozlabs.org/patch/1222179/

Norbert Lange (10):
package/systemd: move preset-all HOOK to fakeroot stage package/systemd: add libnss-systemd to name resolution package/systemd: remove unused user accounts package/systemd: create "remote" user if the feature is enabled package/systemd: cosmetic rearrange list of users package/systemd: sync user comments to upstream
Makefile: Handle systemd catalogs in PURGE_LOCALES package/systemd: add hook to update journalctl catalogs package/systemd: option to delete all catalog files package/systemd: invoke systemd-tmpfilesd on final image

 Makefile                   |  8 ++++++
 package/systemd/Config.in  | 12 ++++++++
 package/systemd/systemd.mk | 56 ++++++++++++++++++++++++++++++--------
 3 files changed, 65 insertions(+), 11 deletions(-)

--
2.24.1

#1 lore raw

PATCH 1/10 package/systemd: move preset-all HOOK to fakeroot stage

User can drop in more systemd units or presets in an rootfs overlay, which will be copied over *after* the TARGET_FINALIZE_HOOKS are run.

Instead, run preset-all afterwards from ROOTFS_PRE_CMD_HOOKS

---
 package/systemd/systemd.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
package/systemd/systemd.mk +1 -1
index 6e31a14ac3..05b07cfd1b 100644
@@ -490,7 +490,7 @@ endef
 define SYSTEMD_PRESET_ALL
 	$(HOST_DIR)/bin/systemctl --root=$(TARGET_DIR) preset-all
 endef
-SYSTEMD_TARGET_FINALIZE_HOOKS += SYSTEMD_PRESET_ALL
+SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_PRESET_ALL
 
 SYSTEMD_CONF_ENV = $(HOST_UTF8_LOCALE_ENV)
 SYSTEMD_NINJA_ENV = $(HOST_UTF8_LOCALE_ENV)
Signature · 1 line
2.24.1
#2 lore raw

PATCH 1/10 package/systemd: move preset-all HOOK to fakeroot stage

LGTM

Le jeu. 6 f?vr. 2020 ? 10:36, Norbert Lange <[email protected]> a ?crit :

Quoted 32 lines

User can drop in more systemd units or presets in an rootfs overlay, which will be copied over *after* the TARGET_FINALIZE_HOOKS are run.

Instead, run preset-all afterwards from ROOTFS_PRE_CMD_HOOKS

---
 package/systemd/systemd.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
package/systemd/systemd.mk +1 -2
index 6e31a14ac3..05b07cfd1b 100644
@@ -490,7 +490,7 @@ endef
 define SYSTEMD_PRESET_ALL
        $(HOST_DIR)/bin/systemctl --root=$(TARGET_DIR) preset-all
 endef
-SYSTEMD_TARGET_FINALIZE_HOOKS += SYSTEMD_PRESET_ALL
+SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_PRESET_ALL
 
 SYSTEMD_CONF_ENV = $(HOST_UTF8_LOCALE_ENV)
 SYSTEMD_NINJA_ENV = $(HOST_UTF8_LOCALE_ENV)
--

2.24.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200607/50da848b/attachment-0001.html>
#3 lore raw

PATCH 1/10 package/systemd: move preset-all HOOK to fakeroot stage

J?r?my, All,

On 2020-06-07 13:09 +0200, J?r?my ROSEN spake thusly:

Quoted 1 line

LGTM

Could you reply with actual reviewd-by or acked-by tags, please?

https://buildroot.org/downloads/manual/manual.html#_reviewing_and_testing_patches

In the meantime, I'll assume your 'LGTM' here and in other patches, means you provided your Reviewed-by tag. Thanks! :-)

Regards,
Yann E. MORIN.

Quoted 69 lines

Le?jeu. 6 f?vr. 2020 ??10:36, Norbert Lange < [1][email protected]> a ?crit?:

User can drop in more systemd units or presets in an rootfs overlay, which will be copied over *after* the TARGET_FINALIZE_HOOKS are run.

Instead, run preset-all afterwards from ROOTFS_PRE_CMD_HOOKS

---

  ?package/systemd/ [3]systemd.mk | 2 +-

?1 file changed, 1 insertion(+), 1 deletion(-)

  diff --git a/package/systemd/ [4]systemd.mk b/package/systemd/ [5]systemd.mk
  index 6e31a14ac3..05b07cfd1b 100644
  --- a/package/systemd/ [6]systemd.mk
  +++ b/package/systemd/ [7]systemd.mk
  @@ -490,7 +490,7 @@ endef
  ?define SYSTEMD_PRESET_ALL
  ? ? ? ? $(HOST_DIR)/bin/systemctl --root=$(TARGET_DIR) preset-all
  ?endef
  -SYSTEMD_TARGET_FINALIZE_HOOKS += SYSTEMD_PRESET_ALL
  +SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_PRESET_ALL

  ?SYSTEMD_CONF_ENV = $(HOST_UTF8_LOCALE_ENV)
  ?SYSTEMD_NINJA_ENV = $(HOST_UTF8_LOCALE_ENV)
  --
  2.24.1

_______________________________________________
buildroot mailing list
[8]buildroot at busybox.net [9]http://lists.busybox.net/mailman/listinfo/buildroot

--

+-----------------------------------------------------------------------------------------------------------------------+
|                               | J?r?my ROSEN                                                                |
| [10]3D"SMILE"[11] ?      | Architecte technique                                                                  |
|                               | [12]3D"email" ? [13]jeremy.rosen at smile.fr?                                  |
| 20 rue des Jardins            | [14]3D"phone" ? +33 6 88 25 87 42?                                          |
| 92600 Asni?res-sur-Seine | [15]3D"url" ? [16]http://www.smile.eu                                            |
|                               | [17]3D"Twitter" ? [18]3D"Facebook" ? [19]3D"LinkedIn" ? [20]3D"Github" |
+-----------------------------------------------------------------------------------------------------------------------+

[21]3D"D?couvrez

Links:
1. mailto:nolange79 at gmail.com
2. mailto:nolange79 at gmail.com
3. http://systemd.mk
4. http://systemd.mk
5. http://systemd.mk
6. http://systemd.mk
7. http://systemd.mk
8. mailto:buildroot at busybox.net
9. http://lists.busybox.net/mailman/listinfo/buildroot
10. http://www.smile.eu/
11. http://www.smile.eu/
12. Image: http://ftp.smile.fr/client/Communication/signature/img/mail.png
13. mailto:jeremy.rosen at smile.fr
14. Image: http://ftp.smile.fr/client/Communication/signature/img/phone.png
15. Image: http://ftp.smile.fr/client/Communication/signature/img/web.png
16. http://www.smile.eu/
17. https://twitter.com/GroupeSmile
18. https://www.facebook.com/smileopensource
19. https://www.linkedin.com/company/smile
20. https://github.com/Smile-SA
21. https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature

Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#4 lore raw

PATCH 1/10 package/systemd: move preset-all HOOK to fakeroot stage

My bad...
I mess up the etiquette of the various projects I follow,

thx for appying...

Le dim. 7 juin 2020 ? 13:46, Yann E. MORIN <[email protected]> a ?crit :

Quoted 114 lines

J?r?my, All,

On 2020-06-07 13:09 +0200, J?r?my ROSEN spake thusly:

Quoted 1 line

LGTM

Could you reply with actual reviewd-by or acked-by tags, please?

https://buildroot.org/downloads/manual/manual.html#_reviewing_and_testing_patches

In the meantime, I'll assume your 'LGTM' here and in other patches, means you provided your Reviewed-by tag. Thanks! :-)

Regards,
Yann E. MORIN.

Quoted 1 line

Le jeu. 6 f?vr. 2020 ? 10:36, Norbert Lange < [1][email protected]> a

?crit :

Quoted 5 lines

User can drop in more systemd units or presets in an rootfs overlay, which will be copied over *after* the TARGET_FINALIZE_HOOKS are run.

Quoted 8 lines

Instead, run preset-all afterwards from ROOTFS_PRE_CMD_HOOKS

---

   package/systemd/ [3]systemd.mk | 2 +-
   1 file changed, 1 insertion(+), 1 deletion(-)
  diff --git a/package/systemd/ [4]systemd.mk b/package/systemd/ [5]

systemd.mk

Quoted 15 lines
  index 6e31a14ac3..05b07cfd1b 100644
  --- a/package/systemd/ [6]systemd.mk
  +++ b/package/systemd/ [7]systemd.mk
  @@ -490,7 +490,7 @@ endef
   define SYSTEMD_PRESET_ALL
          $(HOST_DIR)/bin/systemctl --root=$(TARGET_DIR) preset-all
   endef
  -SYSTEMD_TARGET_FINALIZE_HOOKS += SYSTEMD_PRESET_ALL
  +SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_PRESET_ALL
   SYSTEMD_CONF_ENV = $(HOST_UTF8_LOCALE_ENV)
   SYSTEMD_NINJA_ENV = $(HOST_UTF8_LOCALE_ENV)
  --
  2.24.1
Quoted 8 lines

_______________________________________________
buildroot mailing list
[8]buildroot at busybox.net [9]http://lists.busybox.net/mailman/listinfo/buildroot

--

+-----------------------------------------------------------------------------------------------------------------------+
> |                               | J?r?my ROSEN
                                      |
> | [10]3D"SMILE"[11]        | Architecte technique
                                          |
> |                               | [12]3D"email"   [13]
jeremy.rosen at smile.fr                                   |
> | 20 rue des Jardins            | [14]3D"phone"   +33 6 88 25 87 42
                                      |
> | 92600 Asni?res-sur-Seine | [15]3D"url"   [16]http://www.smile.eu
                                      |
> |                               | [17]3D"Twitter"   [18]3D"Facebook"
[19]3D"LinkedIn"   [20]3D"Github" |
Quoted 1 line

+-----------------------------------------------------------------------------------------------------------------------+

Quoted 16 lines

[21]3D"D?couvrez

Links:
1. mailto:nolange79 at gmail.com
2. mailto:nolange79 at gmail.com
3. http://systemd.mk
4. http://systemd.mk
5. http://systemd.mk
6. http://systemd.mk
7. http://systemd.mk
8. mailto:buildroot at busybox.net
9. http://lists.busybox.net/mailman/listinfo/buildroot
10. http://www.smile.eu/
11. http://www.smile.eu/
12. Image:

http://ftp.smile.fr/client/Communication/signature/img/mail.png

Quoted 2 lines

13. mailto:jeremy.rosen at smile.fr
14. Image:

http://ftp.smile.fr/client/Communication/signature/img/phone.png

Quoted 1 line

15. Image:

http://ftp.smile.fr/client/Communication/signature/img/web.png

Quoted 6 lines

16. http://www.smile.eu/
17. https://twitter.com/GroupeSmile
18. https://www.facebook.com/smileopensource
19. https://www.linkedin.com/company/smile
20. https://github.com/Smile-SA
21.

https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature

--

.-----------------.--------------------.------------------.--------------------.

|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics'
conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___
     |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is
no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v
 conspiracy.  |

'------------------------------^-------^------------------^--------------------'

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200607/4291b873/attachment.html>
#5 lore raw

PATCH 1/10 package/systemd: move preset-all HOOK to fakeroot stage

In reply to Norbert Lange

Norbert, All,

On 2020-02-06 10:36 +0100, Norbert Lange spake thusly:

Quoted 7 lines

User can drop in more systemd units or presets in an rootfs overlay, which will be copied over *after* the TARGET_FINALIZE_HOOKS are run.

Instead, run preset-all afterwards from ROOTFS_PRE_CMD_HOOKS

Appied to master, thanks.

Regards,
Yann E. MORIN.

Quoted 20 lines
---
 package/systemd/systemd.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
package/systemd/systemd.mk +1 -1
index 6e31a14ac3..05b07cfd1b 100644
@@ -490,7 +490,7 @@ endef
 define SYSTEMD_PRESET_ALL
 	$(HOST_DIR)/bin/systemctl --root=$(TARGET_DIR) preset-all
 endef
-SYSTEMD_TARGET_FINALIZE_HOOKS += SYSTEMD_PRESET_ALL
+SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_PRESET_ALL
 
 SYSTEMD_CONF_ENV = $(HOST_UTF8_LOCALE_ENV)
 SYSTEMD_NINJA_ENV = $(HOST_UTF8_LOCALE_ENV)
Signature · 1 line
2.24.1
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#6 lore raw

PATCH 2/10 package/systemd: add libnss-systemd to name resolution

In reply to Norbert Lange

The feature DynamicUser creates users/groups without touching the /etc/{passwd,group} files on disk. Adding the dynamic resolver to /etc/nsswitch.conf ensures the Names are resolved consistently.

---
 package/systemd/systemd.mk | 8 ++++++++
 1 file changed, 8 insertions(+)
package/systemd/systemd.mk +8 -0
index 05b07cfd1b..a390cdd1a9 100644
@@ -409,7 +409,15 @@ define SYSTEMD_INSTALL_MACHINEID_HOOK
 	touch $(TARGET_DIR)/etc/machine-id
 endef
 
+define SYSTEMD_ADD_NSSCONFIG_HOOK
+	grep >/dev/null '^passwd:.*systemd' $(TARGET_DIR)/etc/nsswitch.conf || \
+		sed '/^passwd:/ s/$$/ systemd/' $(TARGET_DIR)/etc/nsswitch.conf
+	grep >/dev/null '^group:.*systemd' $(TARGET_DIR)/etc/nsswitch.conf || \
+		sed '/^group:/ s/$$/ systemd/' $(TARGET_DIR)/etc/nsswitch.conf
+endef
+
 SYSTEMD_POST_INSTALL_TARGET_HOOKS += \
+	SYSTEMD_ADD_NSSCONFIG_HOOK \
 	SYSTEMD_INSTALL_INIT_HOOK \
 	SYSTEMD_INSTALL_MACHINEID_HOOK \
 	SYSTEMD_INSTALL_RESOLVCONF_HOOK
Signature · 1 line
2.24.1
#7 lore raw

PATCH 2/10 package/systemd: add libnss-systemd to name resolution

I don't have enough knowledge of nss, to vet this patch, but adding nss-systemd in nsswitch by itself is a great idea

Le jeu. 6 f?vr. 2020 ? 10:36, Norbert Lange <[email protected]> a ?crit :

Quoted 42 lines

The feature DynamicUser creates users/groups without touching the /etc/{passwd,group} files on disk. Adding the dynamic resolver to /etc/nsswitch.conf ensures the Names are resolved consistently.

---
 package/systemd/systemd.mk | 8 ++++++++
 1 file changed, 8 insertions(+)
package/systemd/systemd.mk +3 -0
index 05b07cfd1b..a390cdd1a9 100644
@@ -409,7 +409,15 @@ define SYSTEMD_INSTALL_MACHINEID_HOOK
        touch $(TARGET_DIR)/etc/machine-id
 endef
 
+define SYSTEMD_ADD_NSSCONFIG_HOOK
+       grep >/dev/null '^passwd:.*systemd'
 $(TARGET_DIR)/etc/nsswitch.conf || \
+               sed '/^passwd:/ s/$$/ systemd/'

$(TARGET_DIR)/etc/nsswitch.conf
+ grep >/dev/null '^group:.*systemd' $(TARGET_DIR)/etc/nsswitch.conf

|| \
+               sed '/^group:/ s/$$/ systemd/'

$(TARGET_DIR)/etc/nsswitch.conf

package/systemd/systemd.mk +3 -1
+endef
+
 SYSTEMD_POST_INSTALL_TARGET_HOOKS += \
+       SYSTEMD_ADD_NSSCONFIG_HOOK \
        SYSTEMD_INSTALL_INIT_HOOK \
        SYSTEMD_INSTALL_MACHINEID_HOOK \
        SYSTEMD_INSTALL_RESOLVCONF_HOOK
--

2.24.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200607/7428896a/attachment.html>
#8 lore raw

PATCH 2/10 package/systemd: add libnss-systemd to name resolution

In reply to Norbert Lange

Nrobert, All,

On 2020-02-06 10:36 +0100, Norbert Lange spake thusly:

Quoted 15 lines

The feature DynamicUser creates users/groups without touching the /etc/{passwd,group} files on disk. Adding the dynamic resolver to /etc/nsswitch.conf ensures the Names are resolved consistently.

---
 package/systemd/systemd.mk | 8 ++++++++
 1 file changed, 8 insertions(+)
package/systemd/systemd.mk +0 -0
index 05b07cfd1b..a390cdd1a9 100644

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 413

Quoted 5 lines
package/systemd/systemd.mk +2 -0
@@ -409,7 +409,15 @@ define SYSTEMD_INSTALL_MACHINEID_HOOK
 	touch $(TARGET_DIR)/etc/machine-id
 endef
 
+define SYSTEMD_ADD_NSSCONFIG_HOOK
+	grep >/dev/null '^passwd:.*systemd' $(TARGET_DIR)/etc/nsswitch.conf || \

While this is valid sytx, we customarily put the redirection at the end of the command.

However, in this case, you would want to use 'grep -q', as that does not output anything.

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 414

Quoted 1 line
package/systemd/systemd.mk +1 -0
+		sed '/^passwd:/ s/$$/ systemd/' $(TARGET_DIR)/etc/nsswitch.conf

How can that even work? By default, sed will out put to stdout, not replace in-place.

This clearly has not been tested (or git-commit --amend was forgotten).

In this case, you want to use $(SED) that includes the -i option to do in-place modifications.

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 415

Quoted 1 line
package/systemd/systemd.mk +1 -0
+	grep >/dev/null '^group:.*systemd' $(TARGET_DIR)/etc/nsswitch.conf || \

Ditto grep -q.

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 416

Quoted 1 line
package/systemd/systemd.mk +1 -0
+		sed '/^group:/ s/$$/ systemd/' $(TARGET_DIR)/etc/nsswitch.conf

Ditto $(SED).

Regards,
Yann E. MORIN.

Quoted 10 lines
package/systemd/systemd.mk +3 -0
+endef
+
 SYSTEMD_POST_INSTALL_TARGET_HOOKS += \
+	SYSTEMD_ADD_NSSCONFIG_HOOK \
 	SYSTEMD_INSTALL_INIT_HOOK \
 	SYSTEMD_INSTALL_MACHINEID_HOOK \
 	SYSTEMD_INSTALL_RESOLVCONF_HOOK
Signature · 1 line
2.24.1
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#9 lore raw

PATCH 2/10 package/systemd: add libnss-systemd to name resolution

Am So., 7. Juni 2020 um 13:40 Uhr schrieb Yann E. MORIN <[email protected]>:

Quoted 22 lines

Nrobert, All,

On 2020-02-06 10:36 +0100, Norbert Lange spake thusly:

Quoted 18 lines

The feature DynamicUser creates users/groups without touching the /etc/{passwd,group} files on disk. Adding the dynamic resolver to /etc/nsswitch.conf ensures the Names are resolved consistently.

---
 package/systemd/systemd.mk | 8 ++++++++
 1 file changed, 8 insertions(+)
package/systemd/systemd.mk +0 -0
index 05b07cfd1b..a390cdd1a9 100644
@@ -409,7 +409,15 @@ define SYSTEMD_INSTALL_MACHINEID_HOOK
      touch $(TARGET_DIR)/etc/machine-id
 endef
 
Quoted 8 lines

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 413

Quoted 2 lines
package/systemd/systemd.mk +2 -0
+define SYSTEMD_ADD_NSSCONFIG_HOOK
+     grep >/dev/null '^passwd:.*systemd' $(TARGET_DIR)/etc/nsswitch.conf || \

While this is valid sytx, we customarily put the redirection at the end of the command.

However, in this case, you would want to use 'grep -q', as that does not output anything.

I will do if thats preferred, but I usually redirect because

"Portable shell scripts should avoid both -q and -s and should redirect standard and error output to /dev/null instead."
(https://www.gnu.org/software/grep/manual/html_node/General-Output-Control.html)

Quoted 5 lines

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 414

Quoted 2 lines
package/systemd/systemd.mk +1 -0
+             sed '/^passwd:/ s/$$/ systemd/' $(TARGET_DIR)/etc/nsswitch.conf

How can that even work? By default, sed will out put to stdout, not replace in-place.

Excellent point.

Quoted 2 lines

This clearly has not been tested (or git-commit --amend was forgotten).

It's tested in a way, that I have the resulting file in the rootfs overlay ;)

Quoted 28 lines

In this case, you want to use $(SED) that includes the -i option to do in-place modifications.

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 415

Quoted 1 line
package/systemd/systemd.mk +1 -0
+     grep >/dev/null '^group:.*systemd' $(TARGET_DIR)/etc/nsswitch.conf || \

Ditto grep -q.

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 416

Quoted 1 line
package/systemd/systemd.mk +1 -0
+             sed '/^group:/ s/$$/ systemd/' $(TARGET_DIR)/etc/nsswitch.conf

Ditto $(SED).

Regards,
Yann E. MORIN.

Quoted 10 lines
package/systemd/systemd.mk +3 -1
+endef
+
 SYSTEMD_POST_INSTALL_TARGET_HOOKS += \
+     SYSTEMD_ADD_NSSCONFIG_HOOK \
      SYSTEMD_INSTALL_INIT_HOOK \
      SYSTEMD_INSTALL_MACHINEID_HOOK \
      SYSTEMD_INSTALL_RESOLVCONF_HOOK
--

2.24.1

--
.-----------------.--------------------.------------------.--------------------.

Quoted 5 lines
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |

'------------------------------^-------^------------------^--------------------'

Come to think of it, systemd comes with 4 or so nss plugins, maybe it's a better approach
to have a fully featured nsswitch.conf in the skeleton and then cut out the plugins that are NOT built?
Or use the one from systemd (source: factory/etc/nsswitch.conf), after a sed 's,compat,files,g'

Norbert

#10 lore raw

PATCH 2/10 package/systemd: add libnss-systemd to name resolution

Le dim. 7 juin 2020 ? 21:35, Norbert Lange <[email protected]> a ?crit :

Quoted 108 lines

Am So., 7. Juni 2020 um 13:40 Uhr schrieb Yann E. MORIN <[email protected]>:

Quoted 22 lines

Nrobert, All,

On 2020-02-06 10:36 +0100, Norbert Lange spake thusly:

Quoted 18 lines

The feature DynamicUser creates users/groups without touching the /etc/{passwd,group} files on disk. Adding the dynamic resolver to /etc/nsswitch.conf ensures the Names are resolved consistently.

---
 package/systemd/systemd.mk | 8 ++++++++
 1 file changed, 8 insertions(+)
package/systemd/systemd.mk +0 -0
index 05b07cfd1b..a390cdd1a9 100644
@@ -409,7 +409,15 @@ define SYSTEMD_INSTALL_MACHINEID_HOOK
      touch $(TARGET_DIR)/etc/machine-id
 endef
 
Quoted 2 lines

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 413

Quoted 2 lines
package/systemd/systemd.mk +2 -0
+define SYSTEMD_ADD_NSSCONFIG_HOOK
+     grep >/dev/null '^passwd:.*systemd'

$(TARGET_DIR)/etc/nsswitch.conf || \

Quoted 6 lines

While this is valid sytx, we customarily put the redirection at the end of the command.

However, in this case, you would want to use 'grep -q', as that does not output anything.

I will do if thats preferred, but I usually redirect because

"Portable shell scripts should avoid both -q and -s and should redirect standard and error output to /dev/null instead." (
https://www.gnu.org/software/grep/manual/html_node/General-Output-Control.html
)

Quoted 2 lines

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 414

Quoted 2 lines
package/systemd/systemd.mk +1 -0
+             sed '/^passwd:/ s/$$/ systemd/'

$(TARGET_DIR)/etc/nsswitch.conf

Quoted 3 lines

How can that even work? By default, sed will out put to stdout, not replace in-place.

Excellent point.

Quoted 2 lines

This clearly has not been tested (or git-commit --amend was forgotten).

It's tested in a way, that I have the resulting file in the rootfs overlay ;)

Quoted 5 lines

In this case, you want to use $(SED) that includes the -i option to do in-place modifications.

Quoted 1 line
package/systemd/systemd.mk +1 -0
+     grep >/dev/null '^group:.*systemd'

$(TARGET_DIR)/etc/nsswitch.conf || \

Quoted 4 lines

Ditto grep -q.

Quoted 1 line
package/systemd/systemd.mk +1 -0
+             sed '/^group:/ s/$$/ systemd/'

$(TARGET_DIR)/etc/nsswitch.conf

Quoted 6 lines

Ditto $(SED).

Regards,
Yann E. MORIN.

Quoted 13 lines
Quoted 10 lines
package/systemd/systemd.mk +3 -1
+endef
+
 SYSTEMD_POST_INSTALL_TARGET_HOOKS += \
+     SYSTEMD_ADD_NSSCONFIG_HOOK \
      SYSTEMD_INSTALL_INIT_HOOK \
      SYSTEMD_INSTALL_MACHINEID_HOOK \
      SYSTEMD_INSTALL_RESOLVCONF_HOOK
--

2.24.1

--

.-----------------.--------------------.------------------.--------------------.

Quoted 1 line

| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics'

conspiracy: |

Quoted 1 line

| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___

       |
Quoted 1 line

| +33 561 099 427 `------------.-------: X AGAINST | \e/ There

is no |

Quoted 1 line

| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v

conspiracy. |

Quoted 1 line

'------------------------------^-------^------------------^--------------------'

Come to think of it, systemd comes with 4 or so nss plugins, maybe it's a better approach
to have a fully featured nsswitch.conf in the skeleton and then cut out the plugins that are NOT built?
Or use the one from systemd (source: factory/etc/nsswitch.conf), after a sed 's,compat,files,g'

Quoted 6 lines

Norbert
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

For the record : systemd's upstream nsswitch.conf

# This file is part of systemd.

passwd:         compat mymachines systemd
group:          compat mymachines systemd
shadow:         compat
hosts:          files mymachines resolve [!UNAVAIL=return] dns myhostname
networks:       files
protocols:      db files
services:       db files
ethers:         db files
rpc:            db files

netgroup: nis

* mymachines add resolution for local (machinectl compatible) containers. It also resolves UID/GID assigned to said-containers
* systemd adds UID/GID resolution for DynamicUser
DynamicUser allows a service to run with a dynamically determined UID, thus simplifying configuration (no need for a line in /etc/passwd)

so independently of "how" I think it makes sense to always enable nss-systemd
and enable mymachines when systemd-nspawn is compiled in.

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200608/eb84b6c0/attachment.html>
#11 lore raw

PATCH 2/10 package/systemd: add libnss-systemd to name resolution

Am Mo., 8. Juni 2020 um 12:09 Uhr schrieb J?r?my ROSEN <[email protected]>:

Quoted 126 lines

Le dim. 7 juin 2020 ? 21:35, Norbert Lange <[email protected]> a ?crit :

Quoted 96 lines

Am So., 7. Juni 2020 um 13:40 Uhr schrieb Yann E. MORIN <[email protected]>:

Quoted 22 lines

Nrobert, All,

On 2020-02-06 10:36 +0100, Norbert Lange spake thusly:

Quoted 18 lines

The feature DynamicUser creates users/groups without touching the /etc/{passwd,group} files on disk. Adding the dynamic resolver to /etc/nsswitch.conf ensures the Names are resolved consistently.

---
 package/systemd/systemd.mk | 8 ++++++++
 1 file changed, 8 insertions(+)
package/systemd/systemd.mk +0 -0
index 05b07cfd1b..a390cdd1a9 100644
@@ -409,7 +409,15 @@ define SYSTEMD_INSTALL_MACHINEID_HOOK
      touch $(TARGET_DIR)/etc/machine-id
 endef
 
Quoted 8 lines

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 413

Quoted 2 lines
package/systemd/systemd.mk +2 -0
+define SYSTEMD_ADD_NSSCONFIG_HOOK
+     grep >/dev/null '^passwd:.*systemd' $(TARGET_DIR)/etc/nsswitch.conf || \

While this is valid sytx, we customarily put the redirection at the end of the command.

However, in this case, you would want to use 'grep -q', as that does not output anything.

I will do if thats preferred, but I usually redirect because

"Portable shell scripts should avoid both -q and -s and should redirect standard and error output to /dev/null instead."
(https://www.gnu.org/software/grep/manual/html_node/General-Output-Control.html)

Quoted 5 lines

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 414

Quoted 2 lines
package/systemd/systemd.mk +1 -0
+             sed '/^passwd:/ s/$$/ systemd/' $(TARGET_DIR)/etc/nsswitch.conf

How can that even work? By default, sed will out put to stdout, not replace in-place.

Excellent point.

Quoted 2 lines

This clearly has not been tested (or git-commit --amend was forgotten).

It's tested in a way, that I have the resulting file in the rootfs overlay ;)

Quoted 28 lines

In this case, you want to use $(SED) that includes the -i option to do in-place modifications.

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 415

Quoted 1 line
package/systemd/systemd.mk +1 -0
+     grep >/dev/null '^group:.*systemd' $(TARGET_DIR)/etc/nsswitch.conf || \

Ditto grep -q.

package/systemd/systemd.mk define SYSTEMD_INSTALL_MACHINEID_HOOK · line 416

Quoted 1 line
package/systemd/systemd.mk +1 -0
+             sed '/^group:/ s/$$/ systemd/' $(TARGET_DIR)/etc/nsswitch.conf

Ditto $(SED).

Regards,
Yann E. MORIN.

Quoted 10 lines
package/systemd/systemd.mk +3 -1
+endef
+
 SYSTEMD_POST_INSTALL_TARGET_HOOKS += \
+     SYSTEMD_ADD_NSSCONFIG_HOOK \
      SYSTEMD_INSTALL_INIT_HOOK \
      SYSTEMD_INSTALL_MACHINEID_HOOK \
      SYSTEMD_INSTALL_RESOLVCONF_HOOK
--

2.24.1

--
.-----------------.--------------------.------------------.--------------------.

Quoted 5 lines
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |

'------------------------------^-------^------------------^--------------------'

Come to think of it, systemd comes with 4 or so nss plugins, maybe it's a better approach
to have a fully featured nsswitch.conf in the skeleton and then cut out the plugins that are NOT built?
Or use the one from systemd (source: factory/etc/nsswitch.conf), after a sed 's,compat,files,g'

Quoted 5 lines

Norbert
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

For the record : systemd's upstream nsswitch.conf

# This file is part of systemd.

passwd:         compat mymachines systemd
group:          compat mymachines systemd
shadow:         compat
hosts:          files mymachines resolve [!UNAVAIL=return] dns myhostname
networks:       files
protocols:      db files
services:       db files
ethers:         db files
rpc:            db files

netgroup: nis

Quoted 8 lines

* mymachines add resolution for local (machinectl compatible) containers. It also resolves UID/GID assigned to said-containers
* systemd adds UID/GID resolution for DynamicUser
DynamicUser allows a service to run with a dynamically determined UID, thus simplifying configuration (no need for a line in /etc/passwd)

so independently of "how" I think it makes sense to always enable nss-systemd and enable mymachines when systemd-nspawn is compiled in.

Actually I would consider the rootfs broken if no nss-systemd is used, some services that ship with systemd use this feature and might behave odd.

I havent re-rolled the entire series, but I changed the code to enable systemd, myhostname and resolve. mymachines is a bit tricky with the placement in the middle.
(thats why I would prefer using a "full-featured" and just removing the non-existent ones, doesn't need a check to prevent adding multiple times either)

Quoted 16 lines

--

20 rue des Jardins
92600 Asni?res-sur-Seine

J?r?my ROSEN
Architecte technique

jeremy.rosen at smile.fr
+33 6 88 25 87 42
http://www.smile.eu

#12 lore raw

PATCH 3/10 package/systemd: remove unused user accounts

In reply to Norbert Lange

Since V235 the "gateway" and "upload" services use DynamicUsers, requiring no entries in /etc/passwd.
This functionality requires option nss-systemd, which is always enabled in buildroot.

The "bus-proxy" user was removed in V230

---
 package/systemd/systemd.mk | 3 ---
 1 file changed, 3 deletions(-)
package/systemd/systemd.mk +0 -3
index a390cdd1a9..b46c4fd540 100644
@@ -431,10 +431,7 @@ define SYSTEMD_USERS
 	- - systemd-journal -1 * - - - Journal
 	- - render -1 * - - - DRI rendering nodes
 	- - kvm -1 * - - - kvm nodes
-	systemd-bus-proxy -1 systemd-bus-proxy -1 * - - - Proxy D-Bus messages to/from a bus
-	systemd-journal-gateway -1 systemd-journal-gateway -1 * /var/log/journal - - Journal Gateway
 	systemd-journal-remote -1 systemd-journal-remote -1 * /var/log/journal/remote - - Journal Remote
-	systemd-journal-upload -1 systemd-journal-upload -1 * - - - Journal Upload
 	$(SYSTEMD_COREDUMP_USER)
 	$(SYSTEMD_NETWORKD_USER)
 	$(SYSTEMD_RESOLVED_USER)
Signature · 1 line
2.24.1
#13 lore raw

PATCH 3/10 package/systemd: remove unused user accounts

Yes...
Long term we should use systems-sysuser for that, so upstream trickles down automatically

in the mean time,

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 39 lines

Since V235 the "gateway" and "upload" services use DynamicUsers, requiring no entries in /etc/passwd.
This functionality requires option nss-systemd, which is always enabled in buildroot.

The "bus-proxy" user was removed in V230

---
 package/systemd/systemd.mk | 3 ---
 1 file changed, 3 deletions(-)
package/systemd/systemd.mk +0 -1
index a390cdd1a9..b46c4fd540 100644
@@ -431,10 +431,7 @@ define SYSTEMD_USERS
        - - systemd-journal -1 * - - - Journal
        - - render -1 * - - - DRI rendering nodes
        - - kvm -1 * - - - kvm nodes
-       systemd-bus-proxy -1 systemd-bus-proxy -1 * - - - Proxy D-Bus

messages to/from a bus
- systemd-journal-gateway -1 systemd-journal-gateway -1 *
/var/log/journal - - Journal Gateway
systemd-journal-remote -1 systemd-journal-remote -1 *
/var/log/journal/remote - - Journal Remote
- systemd-journal-upload -1 systemd-journal-upload -1 * - - -
Journal Upload

        $(SYSTEMD_COREDUMP_USER)
        $(SYSTEMD_NETWORKD_USER)
        $(SYSTEMD_RESOLVED_USER)

--
2.24.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/01b5f147/attachment.html>
#14 lore raw

PATCH 3/10 package/systemd: remove unused user accounts

Sure, but that could get tricky is you dont enable sysuser.d on the target, then you would need to grab the files from the host installation and use similar build-options as the target.

Some smart infrastructure work would be needed to not complicate things between non-system, systemd with option x disabled,
and full systemd.

Am Fr., 7. Feb. 2020 um 10:11 Uhr schrieb J?r?my ROSEN < [email protected]>:

Quoted 65 lines

Yes...
Long term we should use systems-sysuser for that, so upstream trickles down automatically

in the mean time,

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 31 lines

Since V235 the "gateway" and "upload" services use DynamicUsers, requiring no entries in /etc/passwd.
This functionality requires option nss-systemd, which is always enabled in buildroot.

The "bus-proxy" user was removed in V230

---
 package/systemd/systemd.mk | 3 ---
 1 file changed, 3 deletions(-)
package/systemd/systemd.mk +0 -1
index a390cdd1a9..b46c4fd540 100644
@@ -431,10 +431,7 @@ define SYSTEMD_USERS
        - - systemd-journal -1 * - - - Journal
        - - render -1 * - - - DRI rendering nodes
        - - kvm -1 * - - - kvm nodes
-       systemd-bus-proxy -1 systemd-bus-proxy -1 * - - - Proxy D-Bus

messages to/from a bus
- systemd-journal-gateway -1 systemd-journal-gateway -1 *
/var/log/journal - - Journal Gateway
systemd-journal-remote -1 systemd-journal-remote -1 *
/var/log/journal/remote - - Journal Remote
- systemd-journal-upload -1 systemd-journal-upload -1 * - - -
Journal Upload

        $(SYSTEMD_COREDUMP_USER)
        $(SYSTEMD_NETWORKD_USER)
        $(SYSTEMD_RESOLVED_USER)
Quoted 8 lines

--
2.24.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

Quoted 8 lines

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/e674c793/attachment.html>

#15 lore raw

PATCH 3/10 package/systemd: remove unused user accounts

That's already in place. We already build host-systemd whenever we build systemd (host-sysuser is currently disabled but that's trivial to enable)

It's just a question of doing it, really... and teaching mkusers a few trick to go with it

Le ven. 7 f?vr. 2020 ? 13:41, Norbert Lange <[email protected]> a ?crit :

Quoted 85 lines

Sure, but that could get tricky is you dont enable sysuser.d on the target, then you would need to grab the files from the host installation and use similar build-options as the target.

Some smart infrastructure work would be needed to not complicate things between non-system, systemd with option x disabled,
and full systemd.

Am Fr., 7. Feb. 2020 um 10:11 Uhr schrieb J?r?my ROSEN < jeremy.rosen at smile.fr>:

Quoted 73 lines

Yes...
Long term we should use systems-sysuser for that, so upstream trickles down automatically

in the mean time,

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 31 lines

Since V235 the "gateway" and "upload" services use DynamicUsers, requiring no entries in /etc/passwd.
This functionality requires option nss-systemd, which is always enabled in buildroot.

The "bus-proxy" user was removed in V230

---
 package/systemd/systemd.mk | 3 ---
 1 file changed, 3 deletions(-)
package/systemd/systemd.mk +0 -1
index a390cdd1a9..b46c4fd540 100644
@@ -431,10 +431,7 @@ define SYSTEMD_USERS
        - - systemd-journal -1 * - - - Journal
        - - render -1 * - - - DRI rendering nodes
        - - kvm -1 * - - - kvm nodes
-       systemd-bus-proxy -1 systemd-bus-proxy -1 * - - - Proxy D-Bus

messages to/from a bus
- systemd-journal-gateway -1 systemd-journal-gateway -1 *
/var/log/journal - - Journal Gateway
systemd-journal-remote -1 systemd-journal-remote -1 *
/var/log/journal/remote - - Journal Remote
- systemd-journal-upload -1 systemd-journal-upload -1 * - - -
Journal Upload

        $(SYSTEMD_COREDUMP_USER)
        $(SYSTEMD_NETWORKD_USER)
        $(SYSTEMD_RESOLVED_USER)
Quoted 8 lines

--
2.24.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/0d5a32cf/attachment.html>
#16 lore raw

PATCH 3/10 package/systemd: remove unused user accounts

I mean if you dont enable host target sysuser, systemd and other packages might not install the config files (these are after all just used for preparing a system).
if you for example enable journal-remote and not sysuser on the target, you would need to enable journal-remote and sysuser on the host, then grab the config files from the host.

Sure, everything can be solved somehow, but it would be easier to figure out the correct way *before* someone begins hacking ( see
https://github.com/systemd/systemd/issues/14806 ).

For ex. you could always enable sysuser on the target and just offer an option to remove those files in the rootfs image afterwards.

Norbert

Am Fr., 7. Feb. 2020 um 13:44 Uhr schrieb J?r?my ROSEN < [email protected]>:

Quoted 108 lines

That's already in place. We already build host-systemd whenever we build systemd (host-sysuser is currently disabled but that's trivial to enable)

It's just a question of doing it, really... and teaching mkusers a few trick to go with it

Le ven. 7 f?vr. 2020 ? 13:41, Norbert Lange <[email protected]> a ?crit :

Quoted 5 lines

Sure, but that could get tricky is you dont enable sysuser.d on the target,
then you would need to grab the files from the host installation and use similar build-options as the target.

Quoted 81 lines

Some smart infrastructure work would be needed to not complicate things between non-system, systemd with option x disabled,
and full systemd.

Am Fr., 7. Feb. 2020 um 10:11 Uhr schrieb J?r?my ROSEN < jeremy.rosen at smile.fr>:

Quoted 73 lines

Yes...
Long term we should use systems-sysuser for that, so upstream trickles down automatically

in the mean time,

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 31 lines

Since V235 the "gateway" and "upload" services use DynamicUsers, requiring no entries in /etc/passwd.
This functionality requires option nss-systemd, which is always enabled in buildroot.

The "bus-proxy" user was removed in V230

---
 package/systemd/systemd.mk | 3 ---
 1 file changed, 3 deletions(-)
package/systemd/systemd.mk +0 -1
index a390cdd1a9..b46c4fd540 100644
@@ -431,10 +431,7 @@ define SYSTEMD_USERS
        - - systemd-journal -1 * - - - Journal
        - - render -1 * - - - DRI rendering nodes
        - - kvm -1 * - - - kvm nodes
-       systemd-bus-proxy -1 systemd-bus-proxy -1 * - - - Proxy D-Bus

messages to/from a bus
- systemd-journal-gateway -1 systemd-journal-gateway -1 *
/var/log/journal - - Journal Gateway
systemd-journal-remote -1 systemd-journal-remote -1 *
/var/log/journal/remote - - Journal Remote
- systemd-journal-upload -1 systemd-journal-upload -1 * - - -
Journal Upload

        $(SYSTEMD_COREDUMP_USER)
        $(SYSTEMD_NETWORKD_USER)
        $(SYSTEMD_RESOLVED_USER)
Quoted 8 lines

--
2.24.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

Quoted 8 lines

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/1b3fde0a/attachment.html>

#17 lore raw

PATCH 3/10 package/systemd: remove unused user accounts

Le ven. 7 f?vr. 2020 ? 13:52, Norbert Lange <[email protected]> a ?crit :

Quoted 5 lines

I mean if you dont enable host target sysuser, systemd and other packages might not install the config files (these are after all just used for preparing a system).

hmm... interesting point.
How can a package detect if sysuser is enabled ? is there a pkg-config option for that ?

Quoted 5 lines

if you for example enable journal-remote and not sysuser on the target, you would need to enable journal-remote and sysuser on the host, then grab the config files from the host.

yes, I see your point

maybe it would be simpler to configure with sysuser both for target and host and remove the binary from the target ?

Thinking out-lout at this point. I'm not sure if that's a good idea.

Quoted 8 lines

Sure, everything can be solved somehow, but it would be easier to figure out the correct way *before* someone begins hacking ( see
https://github.com/systemd/systemd/issues/14806 ).

For ex. you could always enable sysuser on the target and just offer an option to remove those files in the rootfs image afterwards.

Right.... Those files never make sense on the target anyway. Buildroot philosophy is that you can't install software after the fact on the target and it's ok to remove tools that are only used to install stuff after the fact
(that's why the rules files for hwdb are never on the target)

so in a way... we always need sysuser on the host and we never use it on the target.
This all needs more thinking. but there is no emergency. that's for a future patch.

Norbert

Quoted 121 lines

Am Fr., 7. Feb. 2020 um 13:44 Uhr schrieb J?r?my ROSEN < jeremy.rosen at smile.fr>:

Quoted 116 lines

That's already in place. We already build host-systemd whenever we build systemd (host-sysuser is currently disabled but that's trivial to enable)

It's just a question of doing it, really... and teaching mkusers a few trick to go with it

Le ven. 7 f?vr. 2020 ? 13:41, Norbert Lange <[email protected]> a ?crit :

Quoted 5 lines

Sure, but that could get tricky is you dont enable sysuser.d on the target,
then you would need to grab the files from the host installation and use similar build-options as the target.

Quoted 81 lines

Some smart infrastructure work would be needed to not complicate things between non-system, systemd with option x disabled,
and full systemd.

Am Fr., 7. Feb. 2020 um 10:11 Uhr schrieb J?r?my ROSEN < jeremy.rosen at smile.fr>:

Quoted 73 lines

Yes...
Long term we should use systems-sysuser for that, so upstream trickles down automatically

in the mean time,

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 31 lines

Since V235 the "gateway" and "upload" services use DynamicUsers, requiring no entries in /etc/passwd.
This functionality requires option nss-systemd, which is always enabled in buildroot.

The "bus-proxy" user was removed in V230

---
 package/systemd/systemd.mk | 3 ---
 1 file changed, 3 deletions(-)
package/systemd/systemd.mk +0 -1
index a390cdd1a9..b46c4fd540 100644
@@ -431,10 +431,7 @@ define SYSTEMD_USERS
        - - systemd-journal -1 * - - - Journal
        - - render -1 * - - - DRI rendering nodes
        - - kvm -1 * - - - kvm nodes
-       systemd-bus-proxy -1 systemd-bus-proxy -1 * - - - Proxy D-Bus

messages to/from a bus
- systemd-journal-gateway -1 systemd-journal-gateway -1 *
/var/log/journal - - Journal Gateway
systemd-journal-remote -1 systemd-journal-remote -1 *
/var/log/journal/remote - - Journal Remote
- systemd-journal-upload -1 systemd-journal-upload -1 * - - -
Journal Upload

        $(SYSTEMD_COREDUMP_USER)
        $(SYSTEMD_NETWORKD_USER)
        $(SYSTEMD_RESOLVED_USER)
Quoted 8 lines

--
2.24.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/86f4f707/attachment.html>
#18 lore raw

PATCH 3/10 package/systemd: remove unused user accounts

Am Fr., 7. Feb. 2020 um 13:58 Uhr schrieb J?r?my ROSEN < [email protected]>:

Quoted 6 lines

Le ven. 7 f?vr. 2020 ? 13:52, Norbert Lange <[email protected]> a ?crit :

Quoted 1 line
Quoted 9 lines
Quoted 4 lines

I mean if you dont enable host target sysuser, systemd and other packages might not install the config files (these are after all just used for preparing a system).

hmm... interesting point.
How can a package detect if sysuser is enabled ? is there a pkg-config option for that ?

No idea, its a recent addition so that's a hypothetical, its however already true for systemd.
You could for ex. write checks for folders or the sysuser utility.

Quoted 7 lines
Quoted 7 lines

if you for example enable journal-remote and not sysuser on the target, you would need to enable journal-remote and sysuser on the host, then grab the config files from the host.

Quoted 6 lines
Quoted 1 line

yes, I see your point

maybe it would be simpler to configure with sysuser both for target and host and remove the binary from the target ?

Thinking out-lout at this point. I'm not sure if that's a good idea.

I think that's actually the best way. run the tool, then remove the folders and the tool from the target.
Think of an overlayfs that defines users with sysuser configs and the folders/files/permissions with tmpfiles configs.

Quoted 17 lines
Quoted 11 lines

Sure, everything can be solved somehow, but it would be easier to figure out the correct way *before* someone begins hacking ( see
https://github.com/systemd/systemd/issues/14806 ).

For ex. you could always enable sysuser on the target and just offer an option to remove those files in the rootfs image afterwards.

Right.... Those files never make sense on the target anyway. Buildroot philosophy is that you can't install software after the fact on the target and it's ok to remove tools that are only used to install stuff after the fact
(that's why the rules files for hwdb are never on the target)

Quoted 5 lines

so in a way... we always need sysuser on the host and we never use it on the target.
This all needs more thinking. but there is no emergency. that's for a future patch.

The guy in the bug report supposedly (plans to) work on it. From experience, iterations on this list can take a long time.

Quoted 137 lines

Norbert

Quoted 121 lines

Am Fr., 7. Feb. 2020 um 13:44 Uhr schrieb J?r?my ROSEN < jeremy.rosen at smile.fr>:

Quoted 116 lines

That's already in place. We already build host-systemd whenever we build systemd (host-sysuser is currently disabled but that's trivial to enable)

It's just a question of doing it, really... and teaching mkusers a few trick to go with it

Le ven. 7 f?vr. 2020 ? 13:41, Norbert Lange <[email protected]> a ?crit :

Quoted 5 lines

Sure, but that could get tricky is you dont enable sysuser.d on the target,
then you would need to grab the files from the host installation and use similar build-options as the target.

Quoted 81 lines

Some smart infrastructure work would be needed to not complicate things between non-system, systemd with option x disabled,
and full systemd.

Am Fr., 7. Feb. 2020 um 10:11 Uhr schrieb J?r?my ROSEN < jeremy.rosen at smile.fr>:

Quoted 73 lines

Yes...
Long term we should use systems-sysuser for that, so upstream trickles down automatically

in the mean time,

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 31 lines

Since V235 the "gateway" and "upload" services use DynamicUsers, requiring no entries in /etc/passwd.
This functionality requires option nss-systemd, which is always enabled in buildroot.

The "bus-proxy" user was removed in V230

---
 package/systemd/systemd.mk | 3 ---
 1 file changed, 3 deletions(-)
package/systemd/systemd.mk +0 -1
index a390cdd1a9..b46c4fd540 100644
@@ -431,10 +431,7 @@ define SYSTEMD_USERS
        - - systemd-journal -1 * - - - Journal
        - - render -1 * - - - DRI rendering nodes
        - - kvm -1 * - - - kvm nodes
-       systemd-bus-proxy -1 systemd-bus-proxy -1 * - - - Proxy D-Bus

messages to/from a bus
- systemd-journal-gateway -1 systemd-journal-gateway -1 *
/var/log/journal - - Journal Gateway
systemd-journal-remote -1 systemd-journal-remote -1 *
/var/log/journal/remote - - Journal Remote
- systemd-journal-upload -1 systemd-journal-upload -1 * - - -
Journal Upload

        $(SYSTEMD_COREDUMP_USER)
        $(SYSTEMD_NETWORKD_USER)
        $(SYSTEMD_RESOLVED_USER)
Quoted 8 lines

--
2.24.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

Quoted 8 lines

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/218cc83a/attachment.html>

#19 lore raw

PATCH 4/10 package/systemd: create "remote" user if the feature is enabled

In reply to Norbert Lange
---
 package/systemd/systemd.mk | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
package/systemd/systemd.mk +2 -1
index b46c4fd540..b3e83b5d3b 100644
@@ -181,6 +181,7 @@ endif
 
 ifeq ($(BR2_PACKAGE_SYSTEMD_JOURNAL_REMOTE),y)
 SYSTEMD_CONF_OPTS += -Dremote=true
+SYSTEMD_REMOTE_USER = systemd-journal-remote -1 systemd-journal-remote -1 * /var/log/journal/remote - - Journal Remote
 else
 SYSTEMD_CONF_OPTS += -Dremote=false
 endif
@@ -431,7 +432,7 @@ define SYSTEMD_USERS
 	- - systemd-journal -1 * - - - Journal
 	- - render -1 * - - - DRI rendering nodes
 	- - kvm -1 * - - - kvm nodes
-	systemd-journal-remote -1 systemd-journal-remote -1 * /var/log/journal/remote - - Journal Remote
+	$(SYSTEMD_REMOTE_USER)
 	$(SYSTEMD_COREDUMP_USER)
 	$(SYSTEMD_NETWORKD_USER)
 	$(SYSTEMD_RESOLVED_USER)
Signature · 1 line
2.24.1
#20 lore raw

PATCH 4/10 package/systemd: create "remote" user if the feature is enabled

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 36 lines
---
 package/systemd/systemd.mk | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
package/systemd/systemd.mk +1 -0
index b46c4fd540..b3e83b5d3b 100644
@@ -181,6 +181,7 @@ endif
 
 ifeq ($(BR2_PACKAGE_SYSTEMD_JOURNAL_REMOTE),y)
 SYSTEMD_CONF_OPTS += -Dremote=true
+SYSTEMD_REMOTE_USER = systemd-journal-remote -1 systemd-journal-remote -1
 * /var/log/journal/remote - - Journal Remote
 else
 SYSTEMD_CONF_OPTS += -Dremote=false

endif

package/systemd/systemd.mk +0 -1
@@ -431,7 +432,7 @@ define SYSTEMD_USERS
        - - systemd-journal -1 * - - - Journal
        - - render -1 * - - - DRI rendering nodes
        - - kvm -1 * - - - kvm nodes
-       systemd-journal-remote -1 systemd-journal-remote -1 *

/var/log/journal/remote - - Journal Remote
+ $(SYSTEMD_REMOTE_USER)

        $(SYSTEMD_COREDUMP_USER)
        $(SYSTEMD_NETWORKD_USER)
        $(SYSTEMD_RESOLVED_USER)

--
2.24.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/241524fe/attachment.html>
#21 lore raw

PATCH 5/10 package/systemd: cosmetic rearrange list of users

In reply to Norbert Lange
---
 package/systemd/systemd.mk | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
package/systemd/systemd.mk +3 -1
index b3e83b5d3b..b6bd85f130 100644
@@ -428,10 +428,12 @@ define SYSTEMD_INSTALL_IMAGES_CMDS
 endef
 
 define SYSTEMD_USERS
+	# udev user groups
 	- - input -1 * - - - Input device group
-	- - systemd-journal -1 * - - - Journal
 	- - render -1 * - - - DRI rendering nodes
 	- - kvm -1 * - - - kvm nodes
+	# systemd user groups
+	- - systemd-journal -1 * - - - Journal
 	$(SYSTEMD_REMOTE_USER)
 	$(SYSTEMD_COREDUMP_USER)
 	$(SYSTEMD_NETWORKD_USER)
Signature · 1 line
2.24.1
#22 lore raw

PATCH 5/10 package/systemd: cosmetic rearrange list of users

could you add a line pointing to the corresponding file in systemd's source code (i.e the sysuser file from upstream)
that would help future reviewers

apart from that

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 31 lines
---
 package/systemd/systemd.mk | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
package/systemd/systemd.mk +3 -2
index b3e83b5d3b..b6bd85f130 100644
@@ -428,10 +428,12 @@ define SYSTEMD_INSTALL_IMAGES_CMDS
 endef
 
 define SYSTEMD_USERS
+       # udev user groups
        - - input -1 * - - - Input device group
-       - - systemd-journal -1 * - - - Journal
        - - render -1 * - - - DRI rendering nodes
        - - kvm -1 * - - - kvm nodes
+       # systemd user groups
+       - - systemd-journal -1 * - - - Journal
        $(SYSTEMD_REMOTE_USER)
        $(SYSTEMD_COREDUMP_USER)
        $(SYSTEMD_NETWORKD_USER)
--

2.24.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/2efa99e0/attachment.html>
#23 lore raw

PATCH 5/10 package/systemd: cosmetic rearrange list of users

Not sure if you meant to reply to patch #6 instead.

The main reference is the README, and the templates in sysusers.d. You want me to add this as comment in the .mk file if I understood correctly?

Also I am not sure why those users/groups aren't already in the systemd skeleton.

Should I post just an amended Patch #5 or wait a while to redo the series once I got feedback for the rest?

Am Fr., 7. Feb. 2020 um 10:13 Uhr schrieb J?r?my ROSEN < [email protected]>:

Quoted 56 lines

could you add a line pointing to the corresponding file in systemd's source code (i.e the sysuser file from upstream) that would help future reviewers

apart from that

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 26 lines
---
 package/systemd/systemd.mk | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
package/systemd/systemd.mk +3 -2
index b3e83b5d3b..b6bd85f130 100644
@@ -428,10 +428,12 @@ define SYSTEMD_INSTALL_IMAGES_CMDS
 endef
 
 define SYSTEMD_USERS
+       # udev user groups
        - - input -1 * - - - Input device group
-       - - systemd-journal -1 * - - - Journal
        - - render -1 * - - - DRI rendering nodes
        - - kvm -1 * - - - kvm nodes
+       # systemd user groups
+       - - systemd-journal -1 * - - - Journal
        $(SYSTEMD_REMOTE_USER)
        $(SYSTEMD_COREDUMP_USER)
        $(SYSTEMD_NETWORKD_USER)
--

2.24.1

Quoted 5 lines

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

Quoted 8 lines

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/11bea59e/attachment.html>

#24 lore raw

PATCH 5/10 package/systemd: cosmetic rearrange list of users

Le ven. 7 f?vr. 2020 ? 13:47, Norbert Lange <[email protected]> a ?crit :

Quoted 10 lines

Not sure if you meant to reply to patch #6 instead.

maybe :P

The main reference is the README, and the templates in sysusers.d. You want me to add this as comment in the .mk file if I understood correctly?

That's very minor... I meant pointing to the sysusers.d files so someone

that doesn't know systemd as well can check that nothing has changed

Quoted 4 lines

Also I am not sure why those users/groups aren't already in the systemd skeleton.

That's a pretty good question. Also, since they are created by

mkusers they have a UID > 1000 that confuses journald.
(they get their own journal files, as if they were normal users, instead of being logged only in the system journals)

Quoted 4 lines

Should I post just an amended Patch #5 or wait a while to redo the series once I got feedback for the rest?

Wait for more feedback, that's too minor to have you respin just for that.

Cheers
Jeremy

Quoted 68 lines

Am Fr., 7. Feb. 2020 um 10:13 Uhr schrieb J?r?my ROSEN < jeremy.rosen at smile.fr>:

Quoted 64 lines

could you add a line pointing to the corresponding file in systemd's source code (i.e the sysuser file from upstream) that would help future reviewers

apart from that

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 26 lines
---
 package/systemd/systemd.mk | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
package/systemd/systemd.mk +3 -2
index b3e83b5d3b..b6bd85f130 100644
@@ -428,10 +428,12 @@ define SYSTEMD_INSTALL_IMAGES_CMDS
 endef
 
 define SYSTEMD_USERS
+       # udev user groups
        - - input -1 * - - - Input device group
-       - - systemd-journal -1 * - - - Journal
        - - render -1 * - - - DRI rendering nodes
        - - kvm -1 * - - - kvm nodes
+       # systemd user groups
+       - - systemd-journal -1 * - - - Journal
        $(SYSTEMD_REMOTE_USER)
        $(SYSTEMD_COREDUMP_USER)
        $(SYSTEMD_NETWORKD_USER)
--

2.24.1

Quoted 5 lines

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/1cf7dd76/attachment.html>
#25 lore raw

PATCH 5/10 package/systemd: cosmetic rearrange list of users

mkuser creating users by default if a Bug IMHO, the only non-system users are those
that are explicitly defined.
Did not know journald acts differently based on UIDs btw.

I posted a patch to allow creating system users, but that would require changing *every*
package adding users.
https://patchwork.ozlabs.org/patch/1222180/

Norbert

Am Fr., 7. Feb. 2020 um 13:53 Uhr schrieb J?r?my ROSEN < [email protected]>:

Quoted 117 lines

Le ven. 7 f?vr. 2020 ? 13:47, Norbert Lange <[email protected]> a ?crit :

Quoted 10 lines

Not sure if you meant to reply to patch #6 instead.

maybe :P

The main reference is the README, and the templates in sysusers.d. You want me to add this as comment in the .mk file if I understood correctly?

That's very minor... I meant pointing to the sysusers.d files so someone

that doesn't know systemd as well can check that nothing has changed

Quoted 4 lines

Also I am not sure why those users/groups aren't already in the systemd skeleton.

That's a pretty good question. Also, since they are created by

mkusers they have a UID > 1000 that confuses journald.
(they get their own journal files, as if they were normal users, instead of being logged only in the system journals)

Quoted 4 lines

Should I post just an amended Patch #5 or wait a while to redo the series once I got feedback for the rest?

Wait for more feedback, that's too minor to have you respin just for that.

Cheers
Jeremy

Quoted 68 lines

Am Fr., 7. Feb. 2020 um 10:13 Uhr schrieb J?r?my ROSEN < jeremy.rosen at smile.fr>:

Quoted 64 lines

could you add a line pointing to the corresponding file in systemd's source code (i.e the sysuser file from upstream) that would help future reviewers

apart from that

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 26 lines
---
 package/systemd/systemd.mk | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
package/systemd/systemd.mk +3 -2
index b3e83b5d3b..b6bd85f130 100644
@@ -428,10 +428,12 @@ define SYSTEMD_INSTALL_IMAGES_CMDS
 endef
 
 define SYSTEMD_USERS
+       # udev user groups
        - - input -1 * - - - Input device group
-       - - systemd-journal -1 * - - - Journal
        - - render -1 * - - - DRI rendering nodes
        - - kvm -1 * - - - kvm nodes
+       # systemd user groups
+       - - systemd-journal -1 * - - - Journal
        $(SYSTEMD_REMOTE_USER)
        $(SYSTEMD_COREDUMP_USER)
        $(SYSTEMD_NETWORKD_USER)
--

2.24.1

Quoted 5 lines

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

Quoted 8 lines

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/cbb6856d/attachment.html>

#26 lore raw

PATCH 5/10 package/systemd: cosmetic rearrange list of users

Le ven. 7 f?vr. 2020 ? 13:59, Norbert Lange <[email protected]> a ?crit :

Quoted 3 lines

mkuser creating users by default if a Bug IMHO, the only non-system users are those

that are explicitly defined.

Quoted 1 line

Agreed. I'm already working on that. Patch to follow soon

Quoted 3 lines

Did not know journald acts differently based on UIDs btw.

It's linked to the "per-user journal" feature. That feature is only active for UID > 1000 (or wherever the system/human UID split is configured but 1000 is the recommanded default and what buildroot uses)

I posted a patch to allow creating system users, but that would require
changing *every*

Quoted 4 lines

package adding users.
https://patchwork.ozlabs.org/patch/1222180/

Ok, I missed that patch (and reimplemented it :( my bad)

I'm in the process of changing every package, it's just a tedious grep work, but it needs to be done.

Quoted 132 lines

Norbert

Am Fr., 7. Feb. 2020 um 13:53 Uhr schrieb J?r?my ROSEN < jeremy.rosen at smile.fr>:

Quoted 126 lines

Le ven. 7 f?vr. 2020 ? 13:47, Norbert Lange <[email protected]> a ?crit :

Quoted 10 lines

Not sure if you meant to reply to patch #6 instead.

maybe :P

The main reference is the README, and the templates in sysusers.d. You want me to add this as comment in the .mk file if I understood correctly?

That's very minor... I meant pointing to the sysusers.d files so someone

that doesn't know systemd as well can check that nothing has changed

Quoted 4 lines

Also I am not sure why those users/groups aren't already in the systemd skeleton.

That's a pretty good question. Also, since they are created by

mkusers they have a UID > 1000 that confuses journald.
(they get their own journal files, as if they were normal users, instead of being logged only in the system journals)

Quoted 4 lines

Should I post just an amended Patch #5 or wait a while to redo the series once I got feedback for the rest?

Wait for more feedback, that's too minor to have you respin just for

that.

Cheers
Jeremy

Quoted 68 lines

Am Fr., 7. Feb. 2020 um 10:13 Uhr schrieb J?r?my ROSEN < jeremy.rosen at smile.fr>:

Quoted 64 lines

could you add a line pointing to the corresponding file in systemd's source code (i.e the sysuser file from upstream) that would help future reviewers

apart from that

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 26 lines
---
 package/systemd/systemd.mk | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
package/systemd/systemd.mk +3 -2
index b3e83b5d3b..b6bd85f130 100644
@@ -428,10 +428,12 @@ define SYSTEMD_INSTALL_IMAGES_CMDS
 endef
 
 define SYSTEMD_USERS
+       # udev user groups
        - - input -1 * - - - Input device group
-       - - systemd-journal -1 * - - - Journal
        - - render -1 * - - - DRI rendering nodes
        - - kvm -1 * - - - kvm nodes
+       # systemd user groups
+       - - systemd-journal -1 * - - - Journal
        $(SYSTEMD_REMOTE_USER)
        $(SYSTEMD_COREDUMP_USER)
        $(SYSTEMD_NETWORKD_USER)
--

2.24.1

Quoted 5 lines

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/b7020ed4/attachment.html>
#27 lore raw

PATCH 5/10 package/systemd: cosmetic rearrange list of users

Am Fr., 7. Feb. 2020 um 14:07 Uhr schrieb J?r?my ROSEN < [email protected]>:

Quoted 24 lines

Le ven. 7 f?vr. 2020 ? 13:59, Norbert Lange <[email protected]> a ?crit :

Quoted 3 lines

mkuser creating users by default if a Bug IMHO, the only non-system users are those

that are explicitly defined.

Quoted 1 line

Agreed. I'm already working on that. Patch to follow soon

Quoted 3 lines

Did not know journald acts differently based on UIDs btw.

It's linked to the "per-user journal" feature. That feature is only active for UID > 1000 (or wherever the system/human UID split is configured but 1000 is the recommanded default and what buildroot uses)

I posted a patch to allow creating system users, but that would require
changing *every*

Quoted 7 lines
Quoted 4 lines

package adding users.
https://patchwork.ozlabs.org/patch/1222180/

Ok, I missed that patch (and reimplemented it :( my bad)

I'm in the process of changing every package, it's just a tedious grep work, but it needs to be done.

Well, I am glad if I dont have to do that with private patchwork one day, no matter how we get there.

what about changing mkuser default -1 to system user, adding a new value ('-2' or 'u') for normal user?
That way you just need to patch the 1-2 spots where normal users are generated.

Quoted 146 lines
Quoted 133 lines

Norbert

Am Fr., 7. Feb. 2020 um 13:53 Uhr schrieb J?r?my ROSEN < jeremy.rosen at smile.fr>:

Quoted 126 lines

Le ven. 7 f?vr. 2020 ? 13:47, Norbert Lange <[email protected]> a ?crit :

Quoted 10 lines

Not sure if you meant to reply to patch #6 instead.

maybe :P

The main reference is the README, and the templates in sysusers.d. You want me to add this as comment in the .mk file if I understood correctly?

That's very minor... I meant pointing to the sysusers.d files so

someone that doesn't know systemd as well can check that nothing has changed

Quoted 4 lines

Also I am not sure why those users/groups aren't already in the systemd skeleton.

That's a pretty good question. Also, since they are created by

mkusers they have a UID > 1000 that confuses journald.
(they get their own journal files, as if they were normal users, instead of being logged only in the system journals)

Quoted 4 lines

Should I post just an amended Patch #5 or wait a while to redo the series once I got feedback for the rest?

Wait for more feedback, that's too minor to have you respin just for

that.

Cheers
Jeremy

Quoted 68 lines

Am Fr., 7. Feb. 2020 um 10:13 Uhr schrieb J?r?my ROSEN < jeremy.rosen at smile.fr>:

Quoted 64 lines

could you add a line pointing to the corresponding file in systemd's source code (i.e the sysuser file from upstream) that would help future reviewers

apart from that

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 26 lines
---
 package/systemd/systemd.mk | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
package/systemd/systemd.mk +3 -2
index b3e83b5d3b..b6bd85f130 100644
@@ -428,10 +428,12 @@ define SYSTEMD_INSTALL_IMAGES_CMDS
 endef
 
 define SYSTEMD_USERS
+       # udev user groups
        - - input -1 * - - - Input device group
-       - - systemd-journal -1 * - - - Journal
        - - render -1 * - - - DRI rendering nodes
        - - kvm -1 * - - - kvm nodes
+       # systemd user groups
+       - - systemd-journal -1 * - - - Journal
        $(SYSTEMD_REMOTE_USER)
        $(SYSTEMD_COREDUMP_USER)
        $(SYSTEMD_NETWORKD_USER)
--

2.24.1

Quoted 5 lines

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

Quoted 8 lines

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/7ca5313f/attachment-0001.html>

#28 lore raw

PATCH 5/10 package/systemd: cosmetic rearrange list of users

Le ven. 7 f?vr. 2020 ? 14:11, Norbert Lange <[email protected]> a ?crit :

Quoted 9 lines

what about changing mkuser default -1 to system user, adding a new value ('-2' or 'u') for normal user?
That way you just need to patch the 1-2 spots where normal users are generated.

There are no such spot that I could find at first glance in buildroot itself, but that would break user packages...
so I don't think that's a good idea. It would fix more (harmless) bugs than it would create, but the bugs
created would be more problematic than the bugs fixed....

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/72c85b6f/attachment.html>
#29 lore raw

PATCH 5/10 package/systemd: cosmetic rearrange list of users

Define what you mean with break - chances are, its not worse than all of packages suddenly creating system users.

I meant that the lists from BR2_ROOTFS_USERS_TABLES are handled special and create normal users (uid >= 0),
while all packages (buildroot or user packages) create system users with uid=-1.

new packages could use 's' and 'u' instead, with -1 being somewhat ambiguous then (potentially being deprecated one day).

Am Fr., 7. Feb. 2020 um 14:23 Uhr schrieb J?r?my ROSEN < [email protected]>:

Quoted 32 lines

Le ven. 7 f?vr. 2020 ? 14:11, Norbert Lange <[email protected]> a ?crit :

Quoted 9 lines

what about changing mkuser default -1 to system user, adding a new value ('-2' or 'u') for normal user?
That way you just need to patch the 1-2 spots where normal users are generated.

There are no such spot that I could find at first glance in buildroot itself, but that would break user packages...
so I don't think that's a good idea. It would fix more (harmless) bugs than it would create, but the bugs
created would be more problematic than the bugs fixed....

--
[image: SMILE] <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone] +33 6 88 25 87 42
[image: url] http://www.smile.eu

Quoted 8 lines

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200207/d7c40351/attachment.html>

#30 lore raw

PATCH 6/10 package/systemd: sync user comments to upstream

In reply to Norbert Lange

Description is matched to the ones in the upstream sysusers.d files. Remove homedirectory (upstream doesnt care either).

---
 package/systemd/systemd.mk | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
package/systemd/systemd.mk +5 -5
index b6bd85f130..6ea25e3363 100644
@@ -181,7 +181,7 @@ endif
 
 ifeq ($(BR2_PACKAGE_SYSTEMD_JOURNAL_REMOTE),y)
 SYSTEMD_CONF_OPTS += -Dremote=true
-SYSTEMD_REMOTE_USER = systemd-journal-remote -1 systemd-journal-remote -1 * /var/log/journal/remote - - Journal Remote
+SYSTEMD_REMOTE_USER = systemd-journal-remote -1 systemd-journal-remote -1 * - - - systemd Journal Remote
 else
 SYSTEMD_CONF_OPTS += -Dremote=false
 endif
@@ -305,7 +305,7 @@ endif
 
 ifeq ($(BR2_PACKAGE_SYSTEMD_COREDUMP),y)
 SYSTEMD_CONF_OPTS += -Dcoredump=true
-SYSTEMD_COREDUMP_USER = systemd-coredump -1 systemd-coredump -1 * /var/lib/systemd/coredump - - Core Dumper
+SYSTEMD_COREDUMP_USER = systemd-coredump -1 systemd-coredump -1 * - - - systemd core dump processing
 else
 SYSTEMD_CONF_OPTS += -Dcoredump=false
 endif
@@ -325,7 +325,7 @@ endif
 
 ifeq ($(BR2_PACKAGE_SYSTEMD_NETWORKD),y)
 SYSTEMD_CONF_OPTS += -Dnetworkd=true
-SYSTEMD_NETWORKD_USER = systemd-network -1 systemd-network -1 * - - - Network Manager
+SYSTEMD_NETWORKD_USER = systemd-network -1 systemd-network -1 * - - - systemd Network Management
 SYSTEMD_NETWORKD_DHCP_IFACE = $(call qstrip,$(BR2_SYSTEM_DHCP))
 ifneq ($(SYSTEMD_NETWORKD_DHCP_IFACE),)
 define SYSTEMD_INSTALL_NETWORK_CONFS
@@ -344,14 +344,14 @@ define SYSTEMD_INSTALL_RESOLVCONF_HOOK
 		$(TARGET_DIR)/etc/resolv.conf
 endef
 SYSTEMD_CONF_OPTS += -Dresolve=true
-SYSTEMD_RESOLVED_USER = systemd-resolve -1 systemd-resolve -1 * - - - Network Name Resolution Manager
+SYSTEMD_RESOLVED_USER = systemd-resolve -1 systemd-resolve -1 * - - - systemd Resolver
 else
 SYSTEMD_CONF_OPTS += -Dresolve=false
 endif
 
 ifeq ($(BR2_PACKAGE_SYSTEMD_TIMESYNCD),y)
 SYSTEMD_CONF_OPTS += -Dtimesyncd=true
-SYSTEMD_TIMESYNCD_USER = systemd-timesync -1 systemd-timesync -1 * - - - Network Time Synchronization
+SYSTEMD_TIMESYNCD_USER = systemd-timesync -1 systemd-timesync -1 * - - - systemd Time Synchronization
 else
 SYSTEMD_CONF_OPTS += -Dtimesyncd=false
 endif
Signature · 1 line
2.24.1
#31 lore raw

PATCH 7/10 Makefile: Handle systemd catalogs in PURGE_LOCALES

In reply to Norbert Lange

journald supports localization with Catalog files with a naming scheme <name>.<lang>.catalog.
We want to purge them like other locales.

---
 Makefile | 8 ++++++++
 1 file changed, 8 insertions(+)
Makefile +8 -0
index a52f1c75fd..e6890e13c4 100644
@@ -701,6 +701,14 @@ define PURGE_LOCALES
 			fi \
 		done; \
 	done
+	for cfile in $(wildcard $(TARGET_DIR)/usr/lib/systemd/catalog/*.catalog); \
+	do \
+		basename=$${cfile##*/}; \
+		basename=$${basename%.catalog}; \
+		langext=$${basename#*.}; \
+		[ "$$langext" != "$${basename}" ] || continue; \
+		grep -qx "$${langext}" $(LOCALE_WHITELIST) || rm -f "$$cfile"; \
+	done
 	if [ -d $(TARGET_DIR)/usr/share/X11/locale ]; \
 	then \
 		for lang in $(LOCALE_NOPURGE); \
Signature · 1 line
2.24.1
#32 lore raw

PATCH 8/10 package/systemd: add hook to update journalctl catalogs

In reply to Norbert Lange

journald supports catalog files, or rather a binary database of those.
This add a hook to create said database from the available catalog source files (which are not needed afterwards).

One ugly workaround is or ensuring that PURGE_LOCALES is called before, we do this by adding this hook (will then run twice during the finalize target step).

---
 package/systemd/systemd.mk | 11 +++++++++++
 1 file changed, 11 insertions(+)
package/systemd/systemd.mk +11 -0
index 6ea25e3363..8db3a1b117 100644
@@ -500,6 +500,16 @@ define SYSTEMD_PRESET_ALL
 endef
 SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_PRESET_ALL
 
+define SYSTEMD_UPDATE_CATALOGS
+	$(HOST_DIR)/bin/journalctl --root=$(TARGET_DIR) --update-catalog
+endef
+
+# SYSTEMD_UPDATE_CATALOGS needs to run after PURGE_LOCALES
+ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
+SYSTEMD_TARGET_FINALIZE_HOOKS += PURGE_LOCALES
+endif
+SYSTEMD_TARGET_FINALIZE_HOOKS += SYSTEMD_UPDATE_CATALOGS
+
 SYSTEMD_CONF_ENV = $(HOST_UTF8_LOCALE_ENV)
 SYSTEMD_NINJA_ENV = $(HOST_UTF8_LOCALE_ENV)
 
@@ -577,6 +587,7 @@ HOST_SYSTEMD_DEPENDENCIES = \
 #   $(HOST_DIR)/lib
 # * thus re-tweak rpath after the installation for all binaries that need it
 HOST_SYSTEMD_HOST_TOOLS = \
+	journalctl \
 	systemd-analyze \
 	systemd-mount \
 	systemctl \
Signature · 1 line
2.24.1
#33 lore raw

PATCH 8/10 package/systemd: add hook to update journalctl catalogs

LGTM

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 52 lines

journald supports catalog files, or rather a binary database of those.
This add a hook to create said database from the available catalog source files (which are not needed afterwards).

One ugly workaround is or ensuring that PURGE_LOCALES is called before, we do this by adding this hook (will then run twice during the finalize target step).

---
 package/systemd/systemd.mk | 11 +++++++++++
 1 file changed, 11 insertions(+)
package/systemd/systemd.mk +10 -0
index 6ea25e3363..8db3a1b117 100644
@@ -500,6 +500,16 @@ define SYSTEMD_PRESET_ALL
 endef
 SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_PRESET_ALL
 
+define SYSTEMD_UPDATE_CATALOGS
+       $(HOST_DIR)/bin/journalctl --root=$(TARGET_DIR) --update-catalog
+endef
+
+# SYSTEMD_UPDATE_CATALOGS needs to run after PURGE_LOCALES
+ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
+SYSTEMD_TARGET_FINALIZE_HOOKS += PURGE_LOCALES
+endif
+SYSTEMD_TARGET_FINALIZE_HOOKS += SYSTEMD_UPDATE_CATALOGS
+
 SYSTEMD_CONF_ENV = $(HOST_UTF8_LOCALE_ENV)
 SYSTEMD_NINJA_ENV = $(HOST_UTF8_LOCALE_ENV)
 
@@ -577,6 +587,7 @@ HOST_SYSTEMD_DEPENDENCIES = \
 #   $(HOST_DIR)/lib
 # * thus re-tweak rpath after the installation for all binaries that need

it
HOST_SYSTEMD_HOST_TOOLS = \

+       journalctl \
        systemd-analyze \
        systemd-mount \
        systemctl \

--
2.24.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200607/7bbb23c0/attachment.html>
#34 lore raw

PATCH 8/10 package/systemd: add hook to update journalctl catalogs

In reply to Norbert Lange

Norbert, All,

On 2020-02-06 10:36 +0100, Norbert Lange spake thusly:

Quoted 36 lines

journald supports catalog files, or rather a binary database of those.
This add a hook to create said database from the available catalog source files (which are not needed afterwards).

One ugly workaround is or ensuring that PURGE_LOCALES is called before, we do this by adding this hook (will then run twice during the finalize target step).

---
 package/systemd/systemd.mk | 11 +++++++++++
 1 file changed, 11 insertions(+)
package/systemd/systemd.mk +10 -0
index 6ea25e3363..8db3a1b117 100644
@@ -500,6 +500,16 @@ define SYSTEMD_PRESET_ALL
 endef
 SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_PRESET_ALL
 
+define SYSTEMD_UPDATE_CATALOGS
+	$(HOST_DIR)/bin/journalctl --root=$(TARGET_DIR) --update-catalog
+endef
+
+# SYSTEMD_UPDATE_CATALOGS needs to run after PURGE_LOCALES
+ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
+SYSTEMD_TARGET_FINALIZE_HOOKS += PURGE_LOCALES
+endif
+SYSTEMD_TARGET_FINALIZE_HOOKS += SYSTEMD_UPDATE_CATALOGS
+
 SYSTEMD_CONF_ENV = $(HOST_UTF8_LOCALE_ENV)
 SYSTEMD_NINJA_ENV = $(HOST_UTF8_LOCALE_ENV)
 

package/systemd/systemd.mk HOST_SYSTEMD_DEPENDENCIES = \ · line 590

Quoted 4 lines
package/systemd/systemd.mk +1 -0
@@ -577,6 +587,7 @@ HOST_SYSTEMD_DEPENDENCIES = \
 #   $(HOST_DIR)/lib
 # * thus re-tweak rpath after the installation for all binaries that need it
 HOST_SYSTEMD_HOST_TOOLS = \
+	journalctl \

Why are you adding journalctl to this list?

This list is only used to fix the RPATH in the prgrams. If the programs do not need the RPATH, we don;t need to fix them up.

This list is not about identifying the host tools we are using (indeed, most entries in that list are not used at all).

If however, you foudn a case where journalctl needs an RPATH entry, then:
- explain why: identify the libraries involved, and add explicit dependencies on the packages providign those libraries,
- send that change in a separate patch.

Regards,
Yann E. MORIN.

Quoted 6 lines
package/systemd/systemd.mk +0 -0
 	systemd-analyze \
 	systemd-mount \
 	systemctl \
Signature · 1 line
2.24.1
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
#35 lore raw

PATCH 8/10 package/systemd: add hook to update journalctl catalogs

Am So., 7. Juni 2020 um 17:57 Uhr schrieb Yann E. MORIN <[email protected]>:

Quoted 39 lines

Norbert, All,

On 2020-02-06 10:36 +0100, Norbert Lange spake thusly:

Quoted 35 lines

journald supports catalog files, or rather a binary database of those.
This add a hook to create said database from the available catalog source files (which are not needed afterwards).

One ugly workaround is or ensuring that PURGE_LOCALES is called before, we do this by adding this hook (will then run twice during the finalize target step).

---
 package/systemd/systemd.mk | 11 +++++++++++
 1 file changed, 11 insertions(+)
package/systemd/systemd.mk +10 -0
index 6ea25e3363..8db3a1b117 100644
@@ -500,6 +500,16 @@ define SYSTEMD_PRESET_ALL
 endef
 SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_PRESET_ALL
 
+define SYSTEMD_UPDATE_CATALOGS
+     $(HOST_DIR)/bin/journalctl --root=$(TARGET_DIR) --update-catalog
+endef
+
+# SYSTEMD_UPDATE_CATALOGS needs to run after PURGE_LOCALES
+ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
+SYSTEMD_TARGET_FINALIZE_HOOKS += PURGE_LOCALES
+endif
+SYSTEMD_TARGET_FINALIZE_HOOKS += SYSTEMD_UPDATE_CATALOGS
+
 SYSTEMD_CONF_ENV = $(HOST_UTF8_LOCALE_ENV)
 SYSTEMD_NINJA_ENV = $(HOST_UTF8_LOCALE_ENV)
 
Quoted 7 lines

package/systemd/systemd.mk HOST_SYSTEMD_DEPENDENCIES = \ · line 590

Quoted 5 lines
package/systemd/systemd.mk +1 -0
@@ -577,6 +587,7 @@ HOST_SYSTEMD_DEPENDENCIES = \
 #   $(HOST_DIR)/lib
 # * thus re-tweak rpath after the installation for all binaries that need it
 HOST_SYSTEMD_HOST_TOOLS = \
+     journalctl \

Why are you adding journalctl to this list?

Been some months or a year, can only speculate, might be that I originally had to enable building this tool aswell (before rebases).

Quoted 4 lines

This list is only used to fix the RPATH in the prgrams. If the programs do not need the RPATH, we don;t need to fix them up.

Quoted 8 lines

This list is not about identifying the host tools we are using (indeed, most entries in that list are not used at all).

If however, you foudn a case where journalctl needs an RPATH entry, then:
- explain why: identify the libraries involved, and add explicit dependencies on the packages providign those libraries,
- send that change in a separate patch.

Ok. I believe most if not all of systemd's tools depend on libsystemd-*-245.so. If that's the case then a regex might be easier?

% for s in system* journa*; do readelf -d $s | grep -q libsystemd-shared-245.so && echo $s; done systemd-analyze
systemd-ask-password
systemd-cat
systemd-cgls
systemd-cgtop
systemd-delta
systemd-detect-virt
systemd-escape
systemd-id128
systemd-machine-id-setup
systemd-mount
systemd-notify
systemd-nspawn
systemd-path
systemd-run
systemd-socket-activate
systemd-stdio-bridge
systemd-tmpfiles systemd-tty-ask-password-agent
systemd-umount
journalctl

Norbert

#36 lore raw

PATCH 9/10 package/systemd: option to delete all catalog files

In reply to Norbert Lange

Unless you need to rebuild the database, there is
no need for the (source) catalog files.

This option removes the files in a ROOTFS_PRE_CMD_HOOK

---
 package/systemd/Config.in  | 12 ++++++++++++
 package/systemd/systemd.mk |  8 ++++++++
 2 files changed, 20 insertions(+)
package/systemd/Config.in +12 -0
index c727082a1a..c0727db94a 100644
@@ -224,6 +224,18 @@ config BR2_PACKAGE_SYSTEMD_IMPORTD
 
 	  http://www.freedesktop.org/software/systemd/man/machinectl.html#Image%20Transfer%20Commands
 
+config BR2_PACKAGE_SYSTEMD_RETAIN_CATALOGS
+	bool "retain source catalog files"
+	help
+	  catalog files are used to provide extended and potentially localized
+	  messages for the journal.
+	  The files reside in /usr/lib/systemd/catalog, but arent used directly,
+	  instead a binary database will be built using these files.
+
+	  Only if the database needs to be rebuilt later they need to be retained.
+
+	  https://www.freedesktop.org/wiki/Software/systemd/catalog/
+
 config BR2_PACKAGE_SYSTEMD_LOCALED
 	bool "enable locale daemon"
 	help
package/systemd/systemd.mk +8 -0
index 8db3a1b117..4d6ff0be45 100644
@@ -401,6 +401,14 @@ ifneq ($(SYSTEMD_FALLBACK_HOSTNAME),)
 SYSTEMD_CONF_OPTS += -Dfallback-hostname=$(SYSTEMD_FALLBACK_HOSTNAME)
 endif
 
+ifneq ($(BR2_PACKAGE_SYSTEMD_RETAIN_CATALOGS),y)
+define SYSTEMD_RM_SOURCE_CATALOGS_HOOK
+	rm -rf $(TARGET_DIR)/usr/lib/systemd/catalog
+endef
+
+SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_RM_SOURCE_CATALOGS_HOOK
+endif
+
 define SYSTEMD_INSTALL_INIT_HOOK
 	ln -fs multi-user.target \
 		$(TARGET_DIR)/usr/lib/systemd/system/default.target
Signature · 1 line
2.24.1
#37 lore raw

PATCH 10/10 package/systemd: invoke systemd-tmpfilesd on final image

In reply to Norbert Lange

Especially for read-only filesystems it is helpfull to pre-create all folders for non-volatile paths.

This needs to run under fakeroot to allow setting uids/gids/perms

---
 package/systemd/systemd.mk | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
package/systemd/systemd.mk +8 -1
index 4d6ff0be45..69e2e1bf41 100644
@@ -518,6 +518,12 @@ SYSTEMD_TARGET_FINALIZE_HOOKS += PURGE_LOCALES
 endif
 SYSTEMD_TARGET_FINALIZE_HOOKS += SYSTEMD_UPDATE_CATALOGS
 
+define SYSTEMD_CREATE_TMPFILES_HOOK
+	$(HOST_DIR)/bin/systemd-tmpfiles --root=$(TARGET_DIR) --create --boot \
+		$(addprefix --exclude-prefix=/,dev mnt proc run sys tmp) || :
+endef
+SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_CREATE_TMPFILES_HOOK
+
 SYSTEMD_CONF_ENV = $(HOST_UTF8_LOCALE_ENV)
 SYSTEMD_NINJA_ENV = $(HOST_UTF8_LOCALE_ENV)
 
@@ -559,7 +565,7 @@ HOST_SYSTEMD_CONF_OPTS = \
 	-Dvconsole=false \
 	-Dquotacheck=false \
 	-Dsysusers=false \
-	-Dtmpfiles=false \
+	-Dtmpfiles=true \
 	-Dimportd=false \
 	-Dhwdb=false \
 	-Drfkill=false \
@@ -598,6 +604,7 @@ HOST_SYSTEMD_HOST_TOOLS = \
 	journalctl \
 	systemd-analyze \
 	systemd-mount \
+	systemd-tmpfiles \
 	systemctl \
 	udevadm
 
Signature · 1 line
2.24.1
#38 lore raw

PATCH 10/10 package/systemd: invoke systemd-tmpfilesd on final image

Awesome, LGTM

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 54 lines

Especially for read-only filesystems it is helpfull to pre-create all folders for non-volatile paths.

This needs to run under fakeroot to allow setting uids/gids/perms

---
 package/systemd/systemd.mk | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
package/systemd/systemd.mk +3 -1
index 4d6ff0be45..69e2e1bf41 100644
@@ -518,6 +518,12 @@ SYSTEMD_TARGET_FINALIZE_HOOKS += PURGE_LOCALES
 endif
 SYSTEMD_TARGET_FINALIZE_HOOKS += SYSTEMD_UPDATE_CATALOGS
 
+define SYSTEMD_CREATE_TMPFILES_HOOK
+       $(HOST_DIR)/bin/systemd-tmpfiles --root=$(TARGET_DIR) --create
--boot \
+               $(addprefix --exclude-prefix=/,dev mnt proc run sys tmp)

|| :

package/systemd/systemd.mk +5 -2
+endef
+SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_CREATE_TMPFILES_HOOK
+
 SYSTEMD_CONF_ENV = $(HOST_UTF8_LOCALE_ENV)
 SYSTEMD_NINJA_ENV = $(HOST_UTF8_LOCALE_ENV)
@@ -559,7 +565,7 @@ HOST_SYSTEMD_CONF_OPTS = \
        -Dvconsole=false \
        -Dquotacheck=false \
        -Dsysusers=false \
-       -Dtmpfiles=false \
+       -Dtmpfiles=true \
        -Dimportd=false \
        -Dhwdb=false \
        -Drfkill=false \
@@ -598,6 +604,7 @@ HOST_SYSTEMD_HOST_TOOLS = \
        journalctl \
        systemd-analyze \
        systemd-mount \
+       systemd-tmpfiles \
        systemctl \
        udevadm
 
--

2.24.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Signature · 21 lines
[image: SMILE]  <http://www.smile.eu/>

20 rue des Jardins
92600 Asni?res-sur-Seine
*J?r?my ROSEN*
Architecte technique

[image: email] jeremy.rosen at smile.fr
[image: phone]  +33 6 88 25 87 42
[image: url] http://www.smile.eu

[image: Twitter] <https://twitter.com/GroupeSmile> [image: Facebook]
<https://www.facebook.com/smileopensource> [image: LinkedIn]
<https://www.linkedin.com/company/smile> [image: Github]
<https://github.com/Smile-SA>

[image: D?couvrez l?univers Smile, rendez-vous sur smile.eu]
<https://www.smile.eu/fr/publications/livres-blancs/yocto?utm_source=signature&utm_medium=email&utm_campaign=signature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200607/b4cd22bf/attachment.html>
#39 lore raw

PATCH 10/10 package/systemd: invoke systemd-tmpfilesd on final image

Am So., 7. Juni 2020 um 13:15 Uhr schrieb J?r?my ROSEN <[email protected]>:

Quoted 65 lines

Awesome, LGTM

Le jeu. 6 f?vr. 2020 ? 10:37, Norbert Lange <[email protected]> a ?crit :

Quoted 48 lines

Especially for read-only filesystems it is helpfull to pre-create all folders for non-volatile paths.

This needs to run under fakeroot to allow setting uids/gids/perms

---
 package/systemd/systemd.mk | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
package/systemd/systemd.mk +8 -2
index 4d6ff0be45..69e2e1bf41 100644
@@ -518,6 +518,12 @@ SYSTEMD_TARGET_FINALIZE_HOOKS += PURGE_LOCALES
 endif
 SYSTEMD_TARGET_FINALIZE_HOOKS += SYSTEMD_UPDATE_CATALOGS
 
+define SYSTEMD_CREATE_TMPFILES_HOOK
+       $(HOST_DIR)/bin/systemd-tmpfiles --root=$(TARGET_DIR) --create --boot \
+               $(addprefix --exclude-prefix=/,dev mnt proc run sys tmp) || :
+endef
+SYSTEMD_ROOTFS_PRE_CMD_HOOKS += SYSTEMD_CREATE_TMPFILES_HOOK
+
 SYSTEMD_CONF_ENV = $(HOST_UTF8_LOCALE_ENV)
 SYSTEMD_NINJA_ENV = $(HOST_UTF8_LOCALE_ENV)
 
@@ -559,7 +565,7 @@ HOST_SYSTEMD_CONF_OPTS = \
        -Dvconsole=false \
        -Dquotacheck=false \
        -Dsysusers=false \
-       -Dtmpfiles=false \
+       -Dtmpfiles=true \
        -Dimportd=false \
        -Dhwdb=false \
        -Drfkill=false \
@@ -598,6 +604,7 @@ HOST_SYSTEMD_HOST_TOOLS = \
        journalctl \
        systemd-analyze \
        systemd-mount \
+       systemd-tmpfiles \
        systemctl \
        udevadm
 
--

2.24.1

Quoted 4 lines

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

--

20 rue des Jardins
92600 Asni?res-sur-Seine

Quoted 9 lines

J?r?my ROSEN
Architecte technique

jeremy.rosen at smile.fr
+33 6 88 25 87 42
http://www.smile.eu

Well, not entirely good, it currently still needs a systemd patch (upstream commit) to work correctly, which I haven't posted on the ML. (waited for some feedback before respinning)

Norbert