Skip to contentSkip to conversation

configs: arm64: ls1012afrdm Enable CONFIG_BLK

PATCH New Ran Wang 2 participants 3 messages Feb 7, 2020 – Mar 30, 2020

lore
Share & tools
lore

Ran Wang

author
#0 lore raw

PATCH 1/2 configs: arm64: ls1012afrdm Enable CONFIG_BLK

With DM_USB enabled, enable CONFIG_BLK to remove this compile warning for ls1012afrdm based targets:

===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info.
====================================================

---
 configs/ls1012afrdm_qspi_defconfig | 1 +
 configs/ls1012afrdm_tfa_defconfig  | 1 +
 2 files changed, 2 insertions(+)
configs/ls1012afrdm_qspi_defconfig +1 -0
index e5196de..ee0e19c 100644
@@ -55,3 +55,4 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_DM_I2C=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_RTC=y
+CONFIG_BLK=y
configs/ls1012afrdm_tfa_defconfig +1 -0
index 4b55b0c..57bf0a6 100644
@@ -55,3 +55,4 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_DM_I2C=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_RTC=y
+CONFIG_BLK=y
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH 2/2 configs: arm: ls1021aiot: enable CONFIG_DM_USB support

Enable CONFIG_DM_USB to remove below compile warning:

===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info.
====================================================

---
 configs/ls1021aiot_qspi_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/ls1021aiot_qspi_defconfig +1 -0
index 8a3b796..2ae0cb0 100644
@@ -43,6 +43,7 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_FSL_QSPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_DM_I2C=y
Signature · 1 line
2.7.4
#2 lore raw

PATCH 1/2 configs: arm64: ls1012afrdm Enable CONFIG_BLK

In reply to Ran Wang
Quoted 18 lines

-----Original Message-----
From: U-Boot <[email protected]> On Behalf Of Ran Wang
Sent: Friday, February 7, 2020 10:12 AM
To: Priyanka Jain <[email protected]>; Rajesh Bhagat <[email protected]>; Feng Li <[email protected]>
Cc: u-boot at lists.denx.de; Ran Wang <[email protected]>
Subject: [PATCH 1/2] configs: arm64: ls1012afrdm Enable CONFIG_BLK

With DM_USB enabled, enable CONFIG_BLK to remove this compile warning for ls1012afrdm based targets:

===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release.
Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info.
====================================================

Quoted 2 lines

---

Series applied to u-boot-fsl-qoriq after rebasing. Waiting upstream

Thanks
Priyanka