arm64: dts: qcom: sc7180: Add node for bluetooth soc wcn3990
Subsystems (4)
PATCH 1/1 arm64: dts: qcom: sc7180: Add node for bluetooth soc wcn3990
Add node for bluetooth soc wcn3990.
--- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 11 +++++++++++ 1 file changed, 11 insertions(+)
arch/arm64/boot/dts/qcom/sc7180-idp.dts +11 -0
@@ -19,6 +19,7 @@ aliases { hsuart0 = &uart3; serial0 = &uart8; + bluetooth0 = &bluetooth; }; chosen {
@@ -256,6 +257,16 @@ &uart3 { status = "okay"; + bluetooth: wcn3990-bt { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&vreg_l10a_1p8>; + vddxo-supply = <&vreg_l1c_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l10c_3p3>; + max-speed = <3200000>; + clocks = <&rpmhcc RPMH_RF_CLK2>; + status = "okay"; + }; }; &uart8 {
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Quoted 1 line · Balakrishna Godavarthi
subject: arm64: dts: qcom: sc7180: Add node for bluetooth soc wcn3990
Preferably say in the subjct that the node is added for the IDP board.
Quoted 20 lines
Add node for bluetooth soc wcn3990.
Signed-off-by Balakrishna Godavarthi <[email protected]>--- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 11 +++++++++++ 1 file changed, 11 insertions(+)arch/arm64/boot/dts/qcom/sc7180-idp.dts +1
-0@@ -19,6 +19,7 @@ aliases { hsuart0 = &uart3; serial0 = &uart8; + bluetooth0 = &bluetooth; }; chosen {
arch/arm64/boot/dts/qcom/sc7180-idp.dts line 259
Quoted 3 lines
arch/arm64/boot/dts/qcom/sc7180-idp.dts +0
-0@@ -256,6 +257,16 @@ &uart3 { status = "okay";
nit: add a blank line
arch/arm64/boot/dts/qcom/sc7180-idp.dts line 268
Quoted 9 lines
arch/arm64/boot/dts/qcom/sc7180-idp.dts +9
-0+ bluetooth: wcn3990-bt { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&vreg_l10a_1p8>; + vddxo-supply = <&vreg_l1c_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l10c_3p3>; + max-speed = <3200000>; + clocks = <&rpmhcc RPMH_RF_CLK2>; + status = "okay";
status is not needed here AFAIK.
Hi Matthias,
Quoted 6 lines · Matthias Kaehlcke
Quoted 1 line · Balakrishna Godavarthi
subject: arm64: dts: qcom: sc7180: Add node for bluetooth soc wcn3990
Preferably say in the subjct that the node is added for the IDP board.
[Bala]: will update
Quoted 18 lines
Quoted 18 lines
Add node for bluetooth soc wcn3990.
Signed-off-by Balakrishna Godavarthi <[email protected]>--- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 11 +++++++++++ 1 file changed, 11 insertions(+)arch/arm64/boot/dts/qcom/sc7180-idp.dts +1
-0@@ -19,6 +19,7 @@ aliases { hsuart0 = &uart3; serial0 = &uart8; + bluetooth0 = &bluetooth; };
Quoted 8 lines
arch/arm64/boot/dts/qcom/sc7180-idp.dts line 259
Quoted 5 lines
arch/arm64/boot/dts/qcom/sc7180-idp.dts +0
-0chosen {@@ -256,6 +257,16 @@ &uart3 { status = "okay";nit: add a blank line
[Bala]: will update
Quoted 11 lines
arch/arm64/boot/dts/qcom/sc7180-idp.dts line 268
Quoted 9 lines
arch/arm64/boot/dts/qcom/sc7180-idp.dts +9
-0+ bluetooth: wcn3990-bt { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&vreg_l10a_1p8>; + vddxo-supply = <&vreg_l1c_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l10c_3p3>; + max-speed = <3200000>; + clocks = <&rpmhcc RPMH_RF_CLK2>; + status = "okay";status is not needed here AFAIK.
[Bala]: true, will update