Skip to contentSkip to conversation

Add support for loading main_r5fss0_core0

PATCH New Keerthy 2 participants 11 messages Feb 12, 2020 – Feb 23, 2020

Subsystems (4)
lore
Share & tools
lore

Keerthy

author
#0 lore raw

v8 cover Add support for loading main_r5fss0_core0

This patch series enables mcu_r5fss0_core0 & main_r5fss0_core0. Tested for firmware loading and execution on J721e.

Changes in v8:

* Dropped patch to set_env_default in the env/nowhere driver. That was causing memory over run issues on sandbox defconfig with simple_alloc.

Instead used env_relocate in place of env_load which does default environment set up to do env_set calls.

* Fixed IMX build warning.

All the travis tests passed:

https://travis-ci.org/Keerthyj/u-boot/builds/649274826

Changes in v7:

* Added BSD-2 SPDX on lib/elf.c file.
* Added Tom's Reviewed-by for the relevant patches.

Changes in v6:

* Fixed the imx build issue.

Changes in v5:

* Moved the fs_loader node under r5-common-proc-board-u-boot.dtsi
* Added more information on the envnowhere patch.
* Added help LIB_ELF option and removed user configurable description.

Changes in v4:

* Changed env variable names, config names and enhanced commit logs.

Changes in v3:

* Removed saving env in MMC and fixed env saving in SPL when nowhere option is set.

Changes in v2:

* Factored out all the generic elf handling functions under lib/elf.c

Keerthy (9):
lib: elf: Move the generic elf loading/validating functions to lib
arm: k3: Add support for loading non linux remote cores
armv7R: K3: r5_mpu: Enable execute permission for MCU0 BTCM
armv7R: K3: Add support for jumping to firmware
arm: dts: k3-j721e-r5-u-boot: Add fs_loader node
arm: dts: k3-j721e-r5: Enable r5fss0 cluster in SPL
include: configs: j721e_evm: Add env variables for mcu_r5fss0_core0 &

    main_r5fss0_core0

configs: j721e_evm_r5: Enable R5F remoteproc support
configs: j721e_evm_r5_defconfig: Remove saving ENV in eMMC

 .../k3-j721e-r5-common-proc-board-u-boot.dtsi |  27 ++
 .../arm/dts/k3-j721e-r5-common-proc-board.dts |   2 +
 arch/arm/mach-imx/imx_bootaux.c               |  64 -----
 arch/arm/mach-k3/common.c                     | 106 +++++++-
 arch/arm/mach-k3/common.h                     |   2 +
 arch/arm/mach-k3/j721e_init.c                 |  34 +++
 arch/arm/mach-k3/r5_mpu.c                     |   4 +-
 cmd/Kconfig                                   |   1 +
 cmd/elf.c                                     | 229 ----------------
 configs/j721e_evm_r5_defconfig                |   6 +-
 include/configs/j721e_evm.h                   |   4 +
 include/elf.h                                 |   4 +
 lib/Kconfig                                   |   6 +
 lib/Makefile                                  |   1 +
 lib/elf.c                                     | 246 ++++++++++++++++++
 15 files changed, 427 insertions(+), 309 deletions(-)
 create mode 100644 arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi
 create mode 100644 lib/elf.c
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH v8 1/9 lib: elf: Move the generic elf loading/validating functions to lib

Move the generic elf loading/validating functions to lib/ so that they can be re-used and accessed by code existing outside cmd.

While at it remove the duplicate static version of load_elf_image_phdr under arch/arm/mach-imx/imx_bootaux.c.

---

Peng,

Let me know if the mach-imx changes are okay.

Thanks,
Keerthy

 arch/arm/mach-imx/imx_bootaux.c |  64 ---------
 cmd/Kconfig                     |   1 +
 cmd/elf.c                       | 229 -----------------------------
 include/elf.h                   |   4 +
 lib/Kconfig                     |   6 +
 lib/Makefile                    |   1 +
 lib/elf.c                       | 246 ++++++++++++++++++++++++++++++++
 7 files changed, 258 insertions(+), 293 deletions(-)
 create mode 100644 lib/elf.c
arch/arm/mach-imx/imx_bootaux.c +0 -64
index 21e96f8c88..ec0da1164f 100644
@@ -12,70 +12,6 @@
 #include <linux/compiler.h>
 #include <cpu_func.h>
 
-#ifndef CONFIG_IMX8M
-const __weak struct rproc_att hostmap[] = { };
-
-static const struct rproc_att *get_host_mapping(unsigned long auxcore)
-{
-	const struct rproc_att *mmap = hostmap;
-
-	while (mmap && mmap->size) {
-		if (mmap->da <= auxcore &&
-		    mmap->da + mmap->size > auxcore)
-			return mmap;
-		mmap++;
-	}
-
-	return NULL;
-}
-
-/*
- * A very simple elf loader, assumes the image is valid, returns the
- * entry point address.
- */
-static unsigned long load_elf_image_phdr(unsigned long addr)
-{
-	Elf32_Ehdr *ehdr; /* ELF header structure pointer */
-	Elf32_Phdr *phdr; /* Program header structure pointer */
-	int i;
-
-	ehdr = (Elf32_Ehdr *)addr;
-	phdr = (Elf32_Phdr *)(addr + ehdr->e_phoff);
-
-	/* Load each program header */
-	for (i = 0; i < ehdr->e_phnum; ++i, ++phdr) {
-		const struct rproc_att *mmap = get_host_mapping(phdr->p_paddr);
-		void *dst, *src;
-
-		if (phdr->p_type != PT_LOAD)
-			continue;
-
-		if (!mmap) {
-			printf("Invalid aux core address: %08x",
-			       phdr->p_paddr);
-			return 0;
-		}
-
-		dst = (void *)(phdr->p_paddr - mmap->da) + mmap->sa;
-		src = (void *)addr + phdr->p_offset;
-
-		debug("Loading phdr %i to 0x%p (%i bytes)\n",
-		      i, dst, phdr->p_filesz);
-
-		if (phdr->p_filesz)
-			memcpy(dst, src, phdr->p_filesz);
-		if (phdr->p_filesz != phdr->p_memsz)
-			memset(dst + phdr->p_filesz, 0x00,
-			       phdr->p_memsz - phdr->p_filesz);
-		flush_cache((unsigned long)dst &
-			    ~(CONFIG_SYS_CACHELINE_SIZE - 1),
-			    ALIGN(phdr->p_filesz, CONFIG_SYS_CACHELINE_SIZE));
-	}
-
-	return ehdr->e_entry;
-}
-#endif
-
 int arch_auxiliary_core_up(u32 core_id, ulong addr)
 {
 	ulong stack, pc;
cmd/Kconfig +1 -0
index 6403bc45a5..faa133da65 100644
@@ -399,6 +399,7 @@ config CMD_ABOOTIMG
 config CMD_ELF
 	bool "bootelf, bootvx"
 	default y
+	select LIB_ELF
 	help
 	  Boot an ELF/vxWorks image from the memory.
 
cmd/elf.c +0 -229

241 lines not on this page · raw message

include/elf.h +4 -0
index 81f40191d7..e7c51986df 100644
@@ -692,6 +692,10 @@ unsigned long elf_hash(const unsigned char *name);
 
 #ifndef __ASSEMBLER__
 int valid_elf_image(unsigned long addr);
+unsigned long load_elf64_image_phdr(unsigned long addr);
+unsigned long load_elf64_image_shdr(unsigned long addr);
+unsigned long load_elf_image_phdr(unsigned long addr);
+unsigned long load_elf_image_shdr(unsigned long addr);
 #endif
 
 #endif /* _ELF_H */
lib/Kconfig +6 -0
index ab6aff710d..452f390c80 100644
@@ -602,4 +602,10 @@ config TEST_FDTDEC
 config LIB_DATE
 	bool
 
+config LIB_ELF
+	bool
+	help
+	  Supoort basic elf loading/validating functions.
+	  This supports fir 32 bit and 64 bit versions.
+
 endmenu
lib/Makefile +1 -0
index 15259d0473..32bf3f3693 100644
@@ -122,6 +122,7 @@ obj-y += vsprintf.o strto.o
 endif
 
 obj-y += date.o
+obj-$(CONFIG_LIB_ELF) += elf.o
 
 #
 # Build a fast OID lookup registry from include/linux/oid_registry.h
lib/elf.c new file +246 -0

246 lines not on this page · raw message

Signature · 1 line
2.17.1
author
#2 lore raw

PATCH v8 2/9 arm: k3: Add support for loading non linux remote cores

In reply to Keerthy

Add MAIN domain R5FSS0 remoteproc support from spl. This enables loading the elf firmware in SPL and starting the remotecore.

In order to start the core, there should be a file with path "/lib/firmware/j7-main-r5f0_0-fw" under filesystem of respective boot mode.

[Guard start_non_linux_remote_cores under CONFIG_FS_LOADER]

---

Changes in v8:

* Dropped patch to set_env_default in the env/nowhere driver. Instead used env_relocate in place of env_load which does sets up the default env.

 arch/arm/mach-k3/common.c     | 84 ++++++++++++++++++++++++++++++++---
 arch/arm/mach-k3/common.h     |  2 +
 arch/arm/mach-k3/j721e_init.c | 34 ++++++++++++++
 3 files changed, 115 insertions(+), 5 deletions(-)
arch/arm/mach-k3/common.c +79 -5
index 2f82edb970..b840348c83 100644
@@ -17,6 +17,10 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
+#include <fs_loader.h>
+#include <fs.h>
+#include <env.h>
+#include <elf.h>
 
 struct ti_sci_handle *get_ti_sci_handle(void)
 {
@@ -58,6 +62,74 @@ int early_console_init(void)
 #endif
 
 #ifdef CONFIG_SYS_K3_SPL_ATF
+
+void init_env(void)
+{
+#ifdef CONFIG_SPL_ENV_SUPPORT
+	char *part;
+
+	env_init();
+	env_relocate();
+	switch (spl_boot_device()) {
+	case BOOT_DEVICE_MMC2:
+		part = env_get("bootpart");
+		env_set("storage_interface", "mmc");
+		env_set("fw_dev_part", part);
+		break;
+	case BOOT_DEVICE_SPI:
+		env_set("storage_interface", "ubi");
+		env_set("fw_ubi_mtdpart", "UBI");
+		env_set("fw_ubi_volume", "UBI0");
+		break;
+	default:
+		printf("%s from device %u not supported!\n",
+		       __func__, spl_boot_device());
+		return;
+	}
+#endif
+}
+
+#ifdef CONFIG_FS_LOADER
+int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
+{
+	struct udevice *fsdev;
+	char *name = NULL;
+	int size = 0;
+
+	*loadaddr = 0;
+#ifdef CONFIG_SPL_ENV_SUPPORT
+	switch (spl_boot_device()) {
+	case BOOT_DEVICE_MMC2:
+		name = env_get(name_fw);
+		*loadaddr = env_get_hex(name_loadaddr, *loadaddr);
+		break;
+	default:
+		printf("Loading rproc fw image from device %u not supported!\n",
+		       spl_boot_device());
+		return 0;
+	}
+#endif
+	if (!*loadaddr)
+		return 0;
+
+	if (!uclass_get_device(UCLASS_FS_FIRMWARE_LOADER, 0, &fsdev)) {
+		size = request_firmware_into_buf(fsdev, name, (void *)*loadaddr,
+						 0, 0);
+	}
+
+	return size;
+}
+#else
+int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr)
+{
+	return 0;
+}
+#endif
+
+__weak void start_non_linux_remote_cores(void)
+{
+}
+
 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 {
 	struct ti_sci_handle *ti_sci = get_ti_sci_handle();
@@ -66,15 +138,17 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 	/* Release all the exclusive devices held by SPL before starting ATF */
 	ti_sci->ops.dev_ops.release_exclusive_devices(ti_sci);
 
+	ret = rproc_init();
+	if (ret)
+		panic("rproc failed to be initialized (%d)\n", ret);
+
+	init_env();
+	start_non_linux_remote_cores();
+
 	/*
 	 * It is assumed that remoteproc device 1 is the corresponding
 	 * Cortex-A core which runs ATF. Make sure DT reflects the same.
 	 */
-	ret = rproc_dev_init(1);
-	if (ret)
-		panic("%s: ATF failed to initialize on rproc (%d)\n", __func__,
-		      ret);
-
 	ret = rproc_load(1, spl_image->entry_point, 0x200);
 	if (ret)
 		panic("%s: ATF failed to load on rproc (%d)\n", __func__, ret);
arch/arm/mach-k3/common.h +2 -0
index d8b34fe060..42fb8ee6e7 100644
@@ -24,3 +24,5 @@ void setup_k3_mpu_regions(void);
 int early_console_init(void);
 void disable_linefill_optimization(void);
 void remove_fwl_configs(struct fwl_data *fwl_data, size_t fwl_data_size);
+void start_non_linux_remote_cores(void);
+int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr);
arch/arm/mach-k3/j721e_init.c +34 -0
index f7f7398081..13f3791823 100644
@@ -18,6 +18,7 @@
 #include <dm.h>
 #include <dm/uclass-internal.h>
 #include <dm/pinctrl.h>
+#include <remoteproc.h>
 
 #ifdef CONFIG_SPL_BUILD
 #ifdef CONFIG_K3_LOAD_SYSFW
@@ -295,3 +296,36 @@ void release_resources_for_core_shutdown(void)
 	}
 }
 #endif
+
+#ifdef CONFIG_SYS_K3_SPL_ATF
+void start_non_linux_remote_cores(void)
+{
+	int size = 0, ret;
+	u32 loadaddr = 0;
+
+	size = load_firmware("name_mainr5f0_0fw", "addr_mainr5f0_0load",
+			     &loadaddr);
+	if (size <= 0)
+		goto err_load;
+
+	/* assuming remoteproc 2 is aliased for the needed remotecore */
+	ret = rproc_load(2, loadaddr, size);
+	if (ret) {
+		printf("Firmware failed to start on rproc (%d)\n", ret);
+		goto err_load;
+	}
+
+	ret = rproc_start(2);
+	if (ret) {
+		printf("Firmware init failed on rproc (%d)\n", ret);
+		goto err_load;
+	}
+
+	printf("Remoteproc 2 started successfully\n");
+
+	return;
+
+err_load:
+	rproc_reset(2);
+}
+#endif
Signature · 1 line
2.17.1
author
#3 lore raw

PATCH v8 3/9 armv7R: K3: r5_mpu: Enable execute permission for MCU0 BTCM

In reply to Keerthy

Enable execute permission for mcu_r5fss0_core0 BTCM so that we can jump to a firmware directly from SPL.

---
 arch/arm/mach-k3/r5_mpu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
arch/arm/mach-k3/r5_mpu.c +3 -1
index ee076ed877..3d2ff6775a 100644
@@ -26,7 +26,9 @@ struct mpu_region_config k3_mpu_regions[16] = {
 	/* U-Boot's code area marking it as WB and Write allocate */
 	{CONFIG_SYS_SDRAM_BASE, REGION_2, XN_DIS, PRIV_RW_USR_RW,
 	 O_I_WB_RD_WR_ALLOC, REGION_2GB},
-	{0x0, 3, 0x0, 0x0, 0x0, 0x0},
+	/* mcu_r5fss0_core0 BTCM area marking it as WB and Write allocate. */
+	{0x41010000, 3, XN_DIS, PRIV_RW_USR_RW, O_I_WB_RD_WR_ALLOC,
+	 REGION_8MB},
 	{0x0, 4, 0x0, 0x0, 0x0, 0x0},
 	{0x0, 5, 0x0, 0x0, 0x0, 0x0},
 	{0x0, 6, 0x0, 0x0, 0x0, 0x0},
Signature · 1 line
2.17.1
author
#4 lore raw

PATCH v8 4/9 armv7R: K3: Add support for jumping to firmware

In reply to Keerthy

MCU Domain rf50 is currently shutting down after loading the ATF. Load elf firmware and jump to firmware post loading ATF.

ROM doesn't enable ATCM memory, so make sure that firmware that is being loaded doesn't use ATCM memory or override SPL.

---
 arch/arm/mach-k3/common.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)
arch/arm/mach-k3/common.c +16 -6
index b840348c83..c6f1ca737e 100644
@@ -132,8 +132,10 @@ __weak void start_non_linux_remote_cores(void)
 
 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 {
+	typedef void __noreturn (*image_entry_noargs_t)(void);
 	struct ti_sci_handle *ti_sci = get_ti_sci_handle();
-	int ret;
+	u32 loadaddr = 0;
+	int ret, size;
 
 	/* Release all the exclusive devices held by SPL before starting ATF */
 	ti_sci->ops.dev_ops.release_exclusive_devices(ti_sci);
@@ -144,6 +146,9 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 
 	init_env();
 	start_non_linux_remote_cores();
+	size = load_firmware("name_mcur5f0_0fw", "addr_mcur5f0_0load",
+			     &loadaddr);
+
 
 	/*
 	 * It is assumed that remoteproc device 1 is the corresponding
@@ -159,13 +164,18 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 	ret = rproc_start(1);
 	if (ret)
 		panic("%s: ATF failed to start on rproc (%d)\n", __func__, ret);
+	if (!(size > 0 && valid_elf_image(loadaddr))) {
+		debug("Shutting down...\n");
+		release_resources_for_core_shutdown();
+
+		while (1)
+			asm volatile("wfe");
+	}
 
-	debug("Releasing resources...\n");
-	release_resources_for_core_shutdown();
+	image_entry_noargs_t image_entry =
+		(image_entry_noargs_t)load_elf_image_phdr(loadaddr);
 
-	debug("Finalizing core shutdown...\n");
-	while (1)
-		asm volatile("wfe");
+	image_entry();
 }
 #endif
 
Signature · 1 line
2.17.1
author
#5 lore raw

PATCH v8 5/9 arm: dts: k3-j721e-r5-u-boot: Add fs_loader node

In reply to Keerthy

Add fs_loader node which will be needed for loading firmwares from the boot media/filesystem.

---
 .../dts/k3-j721e-r5-common-proc-board-u-boot.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi
arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi new file +15 -0
new file mode 100644
index 0000000000..f98be993e8
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/ {
+	chosen {
+		firmware-loader = &fs_loader0;
+	};
+
+	fs_loader0: fs_loader at 0 {
+		u-boot,dm-pre-reloc;
+		compatible = "u-boot,fs-loader";
+	};
+};
Signature · 1 line
2.17.1
author
#6 lore raw

PATCH v8 6/9 arm: dts: k3-j721e-r5: Enable r5fss0 cluster in SPL

In reply to Keerthy

Enable MAIN domain r5fss0 cluster and its core0 in R5 spl.

---
 .../dts/k3-j721e-r5-common-proc-board-u-boot.dtsi    | 12 ++++++++++++
 arch/arm/dts/k3-j721e-r5-common-proc-board.dts       |  2 ++
 2 files changed, 14 insertions(+)
arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi +12 -0
index f98be993e8..526f42e3a9 100644
@@ -13,3 +13,15 @@
 		compatible = "u-boot,fs-loader";
 	};
 };
+
+&main_r5fss0 {
+	u-boot,dm-spl;
+};
+
+&main_r5fss0_core0 {
+	u-boot,dm-spl;
+};
+
+&main_r5fss0_core1 {
+	u-boot,dm-spl;
+};
arch/arm/dts/k3-j721e-r5-common-proc-board.dts +2 -0
index 1f14d71438..ba2a312602 100644
@@ -13,6 +13,8 @@
 	aliases {
 		remoteproc0 = &sysctrler;
 		remoteproc1 = &a72_0;
+		remoteproc2 = &main_r5fss0_core0;
+		remoteproc3 = &main_r5fss0_core1;
 	};
 
 	chosen {
Signature · 1 line
2.17.1
author
#7 lore raw

PATCH v8 7/9 include: configs: j721e_evm: Add env variables for mcu_r5fss0_core0 & main_r5fss0_core0

In reply to Keerthy

Add env variables for mcu_r5fss0_core0 & main_r5fss0_core0 firmware loadaddr and name.

---
 include/configs/j721e_evm.h | 4 ++++
 1 file changed, 4 insertions(+)
include/configs/j721e_evm.h +4 -0
index 4371c471e5..fc73a9c932 100644
@@ -88,6 +88,10 @@
 	"mmcdev=1\0"							\
 	"bootpart=1:2\0"						\
 	"bootdir=/boot\0"						\
+	"addr_mainr5f0_0load=88000000\0"					\
+	"name_mainr5f0_0fw=/lib/firmware/j7-main-r5f0_0-fw\0"		\
+	"addr_mcur5f0_0load=89000000\0"					\
+	"name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0"		\
 	"rd_spec=-\0"							\
 	"init_mmc=run args_all args_mmc\0"				\
 	"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
Signature · 1 line
2.17.1
author
#8 lore raw

PATCH v8 8/9 configs: j721e_evm_r5: Enable R5F remoteproc support

In reply to Keerthy

Enable R5F remoteproc support in R5 defconfig so that R5s can be started in SPL. While at it enable the SPL_FS_EXT4 config option to load the firmwares from file system.

---
 configs/j721e_evm_r5_defconfig | 2 ++
 1 file changed, 2 insertions(+)
configs/j721e_evm_r5_defconfig +2 -0
index 19fbd450c7..b1fc919f6a 100644
@@ -26,6 +26,7 @@ CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_RESET=y
@@ -96,6 +97,7 @@ CONFIG_SPL_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_TPS65941=y
 CONFIG_K3_SYSTEM_CONTROLLER=y
 CONFIG_REMOTEPROC_TI_K3_ARM64=y
+CONFIG_REMOTEPROC_TI_K3_R5F=y
 CONFIG_DM_RESET=y
 CONFIG_RESET_TI_SCI=y
 CONFIG_DM_SERIAL=y
Signature · 1 line
2.17.1
author
#9 lore raw

PATCH v8 9/9 configs: j721e_evm_r5_defconfig: Remove saving ENV in eMMC

In reply to Keerthy

Remove saving ENV in eMMC in R5 as the power domains are not setup. Environment in eMMC cannot be read if we do not boot from eMMC.

---
 configs/j721e_evm_r5_defconfig | 4 ----
 1 file changed, 4 deletions(-)
configs/j721e_evm_r5_defconfig +0 -4
index b1fc919f6a..67fde3bc5d 100644
@@ -7,7 +7,6 @@ CONFIG_SYS_MALLOC_F_LEN=0x70000
 CONFIG_SOC_K3_J721E=y
 CONFIG_TARGET_J721E_R5_EVM=y
 CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0x680000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
@@ -52,9 +51,6 @@ CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-r5-common-proc-board"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_OFFSET_REDUND=0x700000
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
Signature · 1 line
2.17.1
#10 lore raw

v8 cover Add support for loading main_r5fss0_core0

In reply to Keerthy
Quoted 2 lines · Keerthy

This patch series enables mcu_r5fss0_core0 & main_r5fss0_core0. Tested for firmware loading and execution on J721e.

Series applied to u-boot-ti next branch.

Thanks and regards,
Lokesh