drm/nouveau: DP interlace fixes
Subsystems (4)
Lyude Paul
maintainercover drm/nouveau: DP interlace fixes
Currently, nouveau doesn't actually bother to try probing whether or not it can actually handle interlaced modes over DisplayPort. As a result, on volta and later we'll end up trying to set an interlaced mode even when it's not supported and cause the front end for the display engine to hang.
So, let's teach nouveau to reject interlaced modes on hardware that can't actually handle it. Additionally for MST, since we accomplish this by simply reusing more of the SST mode validation we also get (some) basic bw validation for modes we detect on MST connectors completely for free.
Lyude Paul (4):
drm/nouveau/kms/nv50-: Probe SOR caps for DP interlacing support drm/nouveau/kms/gv100-: Add support for interlaced modes drm/nouveau/kms/nv50-: Move 8BPC limit for MST into
nv50_mstc_get_modes()
drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST
drivers/gpu/drm/nouveau/dispnv50/disp.c | 55 ++++++++++++++------- drivers/gpu/drm/nouveau/dispnv50/headc37d.c | 5 +- drivers/gpu/drm/nouveau/dispnv50/headc57d.c | 5 +- drivers/gpu/drm/nouveau/nouveau_connector.c | 43 ++++++++++------ drivers/gpu/drm/nouveau/nouveau_connector.h | 5 ++ drivers/gpu/drm/nouveau/nouveau_dp.c | 27 ++++++++++ drivers/gpu/drm/nouveau/nouveau_encoder.h | 7 +++ 7 files changed, 108 insertions(+), 39 deletions(-)
Signature · 1 line
2.24.1
Lyude Paul
maintainerPATCH 1/4 drm/nouveau/kms/nv50-: Probe SOR caps for DP interlacing support
Right now, we make the mistake of allowing interlacing on all connectors. Nvidia hardware does not always support interlacing with DP though, so we need to make sure that we don't allow interlaced modes to be set in such situations as otherwise we'll end up accidentally hanging the display HW.
This fixes some hangs with Turing, which would be caused by attempting to set an interlaced mode on hardware that doesn't support it. This patch likely fixes other hardware hanging in the same way as well.
--- drivers/gpu/drm/nouveau/dispnv50/disp.c | 21 ++++++++++++++------- drivers/gpu/drm/nouveau/nouveau_connector.c | 10 +++++++++- drivers/gpu/drm/nouveau/nouveau_encoder.h | 3 +++ 3 files changed, 26 insertions(+), 8 deletions(-)
drivers/gpu/drm/nouveau/dispnv50/disp.c +14 -7
@@ -1714,6 +1714,9 @@ nv50_sor_create(struct drm_connector *connector, struct dcb_output *dcbe)struct nv50_disp *disp =nv50_disp (encoder->dev);struct nvkm_i2c_aux *aux =nvkm_i2c_aux_find (i2c, dcbe->i2c_index); +u32 caps =nvif_rd32 (&disp->disp->object, +0x00640144 + (nv_encoder->or *8 )); +if (aux) {if (disp->disp->object.oclass <GF110_DISP ) {/* HW has no support for address-only
@@ -1727,13 +1730,17 @@ nv50_sor_create(struct drm_connector *connector, struct dcb_output *dcbe) nv_encoder->aux = aux; } -if (nv_connector->type != DCB_CONNECTOR_eDP && -nv50_has_mst (drm)) { - ret =nv50_mstm_new (nv_encoder, &nv_connector->aux, -16 , nv_connector->base.base.id, - &nv_encoder->dp.mstm); -if (ret) -return ret; +if (nv_connector->type != DCB_CONNECTOR_eDP) { +if (nv50_has_mst (drm)) { + ret =nv50_mstm_new (nv_encoder, + &nv_connector->aux, +16 , + connector->base.id, + &nv_encoder->dp.mstm); +if (ret) +return ret; + } + nv_encoder->dp.caps.interlace = !!(caps &0x04000000 ); } }else { struct nvkm_i2c_bus *bus =
drivers/gpu/drm/nouveau/nouveau_connector.c +9 -1
@@ -509,7 +509,11 @@ nouveau_connector_set_encoder(struct drm_connector *connector, nv_connector->detected_encoder = nv_encoder;if (drm->client.device.info.family >=NV_DEVICE_INFO_V0_TESLA ) { - connector->interlace_allowed = true; +if (nv_encoder->dcb->type ==DCB_OUTPUT_DP ) + connector->interlace_allowed = + nv_encoder->dp.caps.interlace; +else + connector->interlace_allowed = true; connector->doublescan_allowed = true; }else if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS ||
@@ -1060,6 +1064,10 @@ nouveau_connector_mode_valid(struct drm_connector *connector,case DCB_OUTPUT_TV :return get_slave_funcs (encoder)->mode_valid (encoder, mode);case DCB_OUTPUT_DP : +if (mode->flags &DRM_MODE_FLAG_INTERLACE && + !nv_encoder->dp.caps.interlace) +return MODE_NO_INTERLACE ; + max_clock = nv_encoder->dp.link_nr; max_clock *= nv_encoder->dp.link_bw; clock = clock * (connector->display_info.bpc *3 ) /10 ;
drivers/gpu/drm/nouveau/nouveau_encoder.h +3 -0
@@ -63,6 +63,9 @@ struct nouveau_encoder {struct nv50_mstm *mstm;int link_nr;int link_bw; +struct { +bool interlace :1 ; + } caps; } dp; };
Signature · 1 line
2.24.1
A message that is not in the archive (sent off-list or not yet received): [email protected]
Lyude Paul
maintainerRe: [PATCH 1/4] drm/nouveau/kms/nv50-: Probe SOR caps for DP interlacing support
For this (and all of the other patches in this series), we can just drop this from stable. I need to send a respin of this series anyway so I will go ahead and drop the stable cc from there.
Quoted 97 lines · Sasha Levin
Hi,
[This is an automated email]
This commit has been processed because it contains a -stable tag. The stable tag indicates that it's relevant for the following trees: all
The bot has tested the following trees: v5.5.3, v5.4.19, v4.19.103, v4.14.170, v4.9.213, v4.4.213.
v5.5.3: Failed to apply! Possible dependencies:
5ff0cb1ce253("drm/nouveau/kms/nv50-: Use less encoders by making mstos
per-head")v5.4.19: Failed to apply! Possible dependencies:
5ff0cb1ce253("drm/nouveau/kms/nv50-: Use less encoders by making mstos
per-head")v4.19.103: Failed to apply! Possible dependencies:
5e292e7646ef("drm/nouveau: Remove unnecessary VCPI checks innv50_msto_cleanup()")
5ff0cb1ce253("drm/nouveau/kms/nv50-: Use less encoders by making mstos
per-head")v4.14.170: Failed to apply! Possible dependencies:
07bbc1c5f49b("drm/nouveau/core/memory: split info pointers from
accessor pointers")0b11b30de9d2 ("drm/nouveau/mmu/nv04-nv4x: move global vmm to nvkm_mmu") 11fc017dfb1e ("drm/nouveau/kms/nv50: prepare for double-buffered LUTs") 1590700d94ac ("drm/nouveau/kms/nv50-: split each resource type intotheir own source files")
269fe32d3343("drm/nouveau/bar: swap oneinit/init ordering, and rename
bar3 to bar2")
30ed49b55b6e("drm/nouveau/kms/nv50-: move code underneath dispnv50/")34508f9d260c("drm/nouveau/kms/nv50-: determine MST support from DP Info
Table")
5b17f3624efa("drm/nouveau/mmu/nv04: implement vmm on top of new base")5e075fdeb166("drm/nouveau/mmu: automatically handle "un-bootstrapping"
of vmm")6359c982243e ("drm/nouveau/mmu/gp10b: fork from gf100") 698c1aa9f83b ("drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors") 7f53d6dc9a72 ("drm/nouveau/core/memory: comptag allocation") 806a73356537 ("drm/nouveau/mmu: implement base for new vm management") 90df522912ac ("drm/nouveau/kms/nv50: use INTERPOLATE_257_UNITY_RANGE LUT on newer chipsets") 997a89003c2d ("drm/nouveau/core/memory: add reference counting") b86a45877ead ("drm/nouveau/mmu/gp100: fork from gf100") c83c4097eba8 ("drm/nouveau/mmu: define user interfaces to mmu memory allocation") cedc4d57df26 ("drm/nouveau/mmu/gm20b: fork from gf100") d1f6c8d2e9df ("drm/nouveau/mmu/gk20a: fork from gf100") e1e33c791a23 ("drm/nouveau/mmu/gm200: fork from gf100") e69dae85c90b ("drm/nouveau/bar/nv50,g84: drop mmu invalidate") e75182f68b7b ("drm/nouveau/kms/nv50: use "low res" lut for indexedmode")
eaf1a69110f4("drm/nouveau/mmu: add base for type-based memory
allocation")
f4778f08a038("drm/nouveau/kms/nv50: fix handling of gamma since atomic
conversion")f5650478ab07 ("drm/nouveau/disp/nv50-: pass nvkm_memory objects forchannel push buffers")
v4.9.213: Failed to apply! Possible dependencies:
11fc017dfb1e("drm/nouveau/kms/nv50: prepare for double-buffered LUTs")34508f9d260c("drm/nouveau/kms/nv50-: determine MST support from DP Info
Table")
3dbd036b8419("drm/nouveau/kms/nv50: separate out mode commit")52aa30f2524d("drm/nouveau/kms/nv50: switch mst sink back into sst
mode")698c1aa9f83b ("drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors") 6bbab3b6b656 ("drm/nouveau/kms/nv50: separate out base/ovly channel usage bounds commit") a7ae1561909d ("drm/nouveau/kms/nv50: separate out lut commit") ad6336195393 ("drm/nouveau/kms/nv50: separate out core surface commit") f4778f08a038 ("drm/nouveau/kms/nv50: fix handling of gamma since atomicconversion")
v4.4.213: Failed to apply! Possible dependencies:
13a3d91f17a5("drm: Pass 'name' todrm_encoder_init()")34508f9d260c("drm/nouveau/kms/nv50-: determine MST support from DP Info
Table")
52aa30f2524d("drm/nouveau/kms/nv50: switch mst sink back into sst
mode")698c1aa9f83b ("drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors") a7ae1561909d ("drm/nouveau/kms/nv50: separate out lut commit") ad6336195393 ("drm/nouveau/kms/nv50: separate out core surface commit") f4778f08a038 ("drm/nouveau/kms/nv50: fix handling of gamma since atomicconversion")
NOTE: The patch will not be queued to stable trees until it is upstream.
How should we proceed with this patch?
Signature · 3 lines
Cheers, Lyude Paul (she/her) Associate Software Engineer at Red Hat
Lyude Paul
maintainerPATCH 2/4 drm/nouveau/kms/gv100-: Add support for interlaced modes
In reply to Lyude PaulWe advertise being able to set interlaced modes, so let's actually make sure to do that. Otherwise, we'll end up hanging the display engine due to trying to set a mode with timings adjusted for interlacing without telling the hardware it's actually an interlaced mode.
--- drivers/gpu/drm/nouveau/dispnv50/headc37d.c | 5 +++-- drivers/gpu/drm/nouveau/dispnv50/headc57d.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-)
drivers/gpu/drm/nouveau/dispnv50/headc37d.c +3 -2
@@ -168,14 +168,15 @@ headc37d_mode(struct nv50_head *head, struct nv50_head_atom *asyh)struct nv50_dmac *core = &nv50_disp (head->base.base.dev)->core->chan;struct nv50_head_mode *m = &asyh->mode;u32 *push; -if ((push =evo_wait (core,12 ))) { +if ((push =evo_wait (core,13 ))) {evo_mthd (push,0x2064 + (head->base.index *0x400 ),5 );evo_data (push, (m->v.active <<16 ) | m->h.active );evo_data (push, (m->v.synce <<16 ) | m->h.synce );evo_data (push, (m->v.blanke <<16 ) | m->h.blanke );evo_data (push, (m->v.blanks <<16 ) | m->h.blanks );evo_data (push, (m->v.blank2e <<16 ) | m->v.blank2s); -evo_mthd (push,0x200c + (head->base.index *0x400 ),1 ); +evo_mthd (push,0x2008 + (head->base.index *0x400 ),2 ); +evo_data (push, m->interlace);evo_data (push, m->clock *1000 );evo_mthd (push,0x2028 + (head->base.index *0x400 ),1 );evo_data (push, m->clock *1000 );
drivers/gpu/drm/nouveau/dispnv50/headc57d.c +3 -2
@@ -173,14 +173,15 @@ headc57d_mode(struct nv50_head *head, struct nv50_head_atom *asyh)struct nv50_dmac *core = &nv50_disp (head->base.base.dev)->core->chan;struct nv50_head_mode *m = &asyh->mode;u32 *push; -if ((push =evo_wait (core,12 ))) { +if ((push =evo_wait (core,13 ))) {evo_mthd (push,0x2064 + (head->base.index *0x400 ),5 );evo_data (push, (m->v.active <<16 ) | m->h.active );evo_data (push, (m->v.synce <<16 ) | m->h.synce );evo_data (push, (m->v.blanke <<16 ) | m->h.blanke );evo_data (push, (m->v.blanks <<16 ) | m->h.blanks );evo_data (push, (m->v.blank2e <<16 ) | m->v.blank2s); -evo_mthd (push,0x200c + (head->base.index *0x400 ),1 ); +evo_mthd (push,0x2008 + (head->base.index *0x400 ),2 ); +evo_data (push, m->interlace);evo_data (push, m->clock *1000 );evo_mthd (push,0x2028 + (head->base.index *0x400 ),1 );evo_data (push, m->clock *1000 );
Signature · 1 line
2.24.1
Lyude Paul
maintainerPATCH 3/4 drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes()
In reply to Lyude PaulThis just limits the BPC for MST connectors to a maximum of 8 from nv50_mstc_get_modes(), instead of doing so during nv50_msto_atomic_check(). This doesn't introduce any functional changes yet (other then userspace now lying about the max bpc, but we can't support that yet anyway so meh). But, we'll need this in a moment so that we can share mode validation between SST and MST which will fix some real world issues.
--- drivers/gpu/drm/nouveau/dispnv50/disp.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)
drivers/gpu/drm/nouveau/dispnv50/disp.c +14 -11
@@ -903,15 +903,9 @@ nv50_msto_atomic_check(struct drm_encoder *encoder,if (!state->duplicated) {const int clock = crtc_state->adjusted_mode.clock; -/* -* XXX: Since we don't use HDR in userspace quite yet, limit -* the bpc to 8 to save bandwidth on the topology. In the -* future, we'll want to properly fix this by dynamically -* selecting the highest possible bpc that would fit in the -* topology -*/ - asyh->or.bpc =min (connector->display_info.bpc,8U ); - asyh->dp.pbn =drm_dp_calc_pbn_mode (clock, asyh->or.bpc *3 , false); + asyh->or.bpc = connector->display_info.bpc; + asyh->dp.pbn =drm_dp_calc_pbn_mode (clock, asyh->or.bpc *3 , + false); } slots = drm_dp_atomic_find_vcpi_slots(state, &mstm->mgr, mstc->port,
@@ -1071,8 +1065,17 @@ nv50_mstc_get_modes(struct drm_connector *connector)if (mstc->edid) ret =drm_add_edid_modes (&mstc->connector, mstc->edid); -if (!mstc->connector.display_info.bpc) - mstc->connector.display_info.bpc =8 ; +/* +* XXX: Since we don't use HDR in userspace quite yet, limit the bpc +* to 8 to save bandwidth on the topology. In the future, we'll want +* to properly fix this by dynamically selecting the highest possible +* bpc that would fit in the topology +*/ +if (connector->display_info.bpc) + connector->display_info.bpc = +clamp (connector->display_info.bpc,6U ,8U ); +else + connector->display_info.bpc =8 ;if (mstc->native)drm_mode_destroy (mstc->connector.dev, mstc->native);
Signature · 1 line
2.24.1
Lyude Paul
maintainerPATCH 4/4 drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST
In reply to Lyude PaulCurrently, the nv50_mstc_mode_valid() function is happy to take any and all modes, even the ones we can't actually support sometimes like interlaced modes.
Luckily, the only difference between the mode validation that needs to be performed for MST vs. SST is that eventually we'll need to check the minimum PBN against the MSTB's full PBN capabilities (remember-we don't care about the current bw state here). Otherwise, all of the other code can be shared.
So, we move all of the common mode validation in nouveau_connector_mode_valid() into a separate helper, nv50_dp_mode_valid(), and use that from both nv50_mstc_mode_valid() and nouveau_connector_mode_valid(). Note that we allow for returning the calculated clock that nv50_dp_mode_valid() came up with, since we'll eventually want to use that for PBN calculation in nv50_mstc_mode_valid().
--- drivers/gpu/drm/nouveau/dispnv50/disp.c | 9 ++++- drivers/gpu/drm/nouveau/nouveau_connector.c | 41 +++++++++++---------- drivers/gpu/drm/nouveau/nouveau_connector.h | 5 +++ drivers/gpu/drm/nouveau/nouveau_dp.c | 27 ++++++++++++++ drivers/gpu/drm/nouveau/nouveau_encoder.h | 4 ++ 5 files changed, 66 insertions(+), 20 deletions(-)
drivers/gpu/drm/nouveau/dispnv50/disp.c +8 -1
@@ -1051,7 +1051,14 @@ static enum drm_mode_status nv50_mstc_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { - return MODE_OK; + struct nv50_mstc *mstc = nv50_mstc(connector); +struct nouveau_encoder *outp = mstc->mstm->outp; + +/* TODO: calculate the PBN from the dotclock and validate against the +* MSTB's max possible PBN +*/ + +return nv50_dp_mode_valid (connector, outp, mode,NULL ); } static int
drivers/gpu/drm/nouveau/nouveau_connector.c +22 -19
70 lines not on this page · raw message
drivers/gpu/drm/nouveau/nouveau_connector.h +5 -0
@@ -195,6 +195,11 @@ int nouveau_conn_atomic_get_property(struct drm_connector *, const struct drm_connector_state *, struct drm_property *, u64 *);struct drm_display_mode *nouveau_conn_native_mode (struct drm_connector *); +enum drm_mode_status +nouveau_conn_mode_clock_valid (const struct drm_display_mode *, +const unsigned min_clock, +const unsigned max_clock, +unsigned *clock);#ifdef CONFIG_DRM_NOUVEAU_BACKLIGHT extern int nouveau_backlight_init (struct drm_connector *);
drivers/gpu/drm/nouveau/nouveau_dp.c +27 -0
@@ -98,3 +98,30 @@ nouveau_dp_detect(struct nouveau_encoder *nv_encoder)return NOUVEAU_DP_SST ;return ret; } + +/* TODO: +* Use the minimum possible BPC here, once we add support for the max bpc +* property. +*/ +enum drm_mode_status +nv50_dp_mode_valid (struct drm_connector *connector, +struct nouveau_encoder *outp, +const struct drm_display_mode *mode, +unsigned *out_clock) +{ +const unsigned min_clock =25000 ; +unsigned max_clock, clock; +enum drm_mode_status ret; + +if (mode->flags &DRM_MODE_FLAG_INTERLACE && !outp->dp.caps.interlace) +return MODE_NO_INTERLACE ; + + max_clock = outp->dp.link_nr * outp->dp.link_bw; + clock = mode->clock * (connector->display_info.bpc *3 ) /10 ; + + ret =nouveau_conn_mode_clock_valid (mode, min_clock, max_clock, + &clock); +if (out_clock) + *out_clock = clock; +return ret; +}
drivers/gpu/drm/nouveau/nouveau_encoder.h +4 -0
@@ -103,6 +103,10 @@ enum nouveau_dp_status { };int nouveau_dp_detect (struct nouveau_encoder *); +enum drm_mode_status nv50_dp_mode_valid (struct drm_connector *, +struct nouveau_encoder *, +const struct drm_display_mode *, +unsigned *clock);struct nouveau_connector *nouveau_encoder_connector_get (struct nouveau_encoder *encoder);
Signature · 1 line
2.24.1