Skip to contentSkip to conversation

getting physical address of buffer into user space

DISCUSSION Marty Leisner 2 participants 2 messages Feb 18, 2020 – Feb 20, 2020 Memory management

lore
Share & tools
lore
#0 lore raw

I've read tutorials and seen example programs on how to get page information into userspace (eventually, I'll want to dma from a UIO driver)

For POC, I have a simple driver with an mmap rule, which does kmalloc on a new buffer.

The driver can read/write the memory, and the user space program can read/write the memory (and both sides agree on the data read/written).

It appears in /proc/self/maps, and when I try to look it up in /proc/self/pagemap, it says its neither swapped nor present.

This seems like a clever way -- if it works (the alternative is sloppy ioctl's or other custom methods)

Signature · 1 line
Marty Leisner <[email protected]>
#1 lore raw
Quoted 3 lines · Marty Leisner

I've read tutorials and seen example programs on how to get page information into userspace (eventually, I'll want to dma from a UIO driver)

Instead of using a UIO driver you may want to consider a VFIO driver as you may not be able to access memory directly from the device with a UIO driver if an IOMMU is present in the system. UIO is normally only used for small embedded controllers where you just need MMIO access.

Quoted 10 lines

For POC, I have a simple driver with an mmap rule, which does kmalloc on a new buffer.

The driver can read/write the memory, and the user space program can read/write the memory (and both sides agree on the data read/written).

It appears in /proc/self/maps, and when I try to look it up in /proc/self/pagemap, it says its neither swapped nor present.

This seems like a clever way -- if it works (the alternative is sloppy ioctl's or other custom methods)

I suggest you just take a look at VFIO. You can find some user documentation here:
https://www.kernel.org/doc/html/latest/driver-api/vfio.html

There are multiple userspace drivers out there that make use of UIO or VFIO functionality. If you are in need of examples just go take a look at the DPDK project (http://git.dpdk.org/dpdk/) as they have all of their NIC drivers implemented in userspace and are using either a igb_uio driver or vfio driver to connect to them.