ufshcd quirk cleanup
Hi all,
this removes lots of dead code from the ufs drivers, an cleans up the quirk handling a little bit.
PATCH 1/2 ufshcd: remove unused quirks
Remove various quirks that don't have users, as well as the dead code keyed off them.
--- drivers/scsi/ufs/ufshcd.c | 120 +++++--------------------------------- drivers/scsi/ufs/ufshcd.h | 22 ------- 2 files changed, 13 insertions(+), 129 deletions(-)
drivers/scsi/ufs/ufshcd.c +13 -107
@@ -642,11 +642,7 @@ static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp)*/ static inline void ufshcd_utrl_clear (struct ufs_hba *hba,u32 pos) { -if (hba->quirks &UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR ) -ufshcd_writel (hba, (1 << pos),REG_UTP_TRANSFER_REQ_LIST_CLEAR ); -else -ufshcd_writel (hba, ~(1 << pos), -REG_UTP_TRANSFER_REQ_LIST_CLEAR ); +ufshcd_writel (hba, (1 << pos),REG_UTP_TRANSFER_REQ_LIST_CLEAR ); }/**
@@ -656,10 +652,7 @@ static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos)*/ static inline void ufshcd_utmrl_clear (struct ufs_hba *hba,u32 pos) { -if (hba->quirks &UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR ) -ufshcd_writel (hba, (1 << pos),REG_UTP_TASK_REQ_LIST_CLEAR ); -else -ufshcd_writel (hba, ~(1 << pos),REG_UTP_TASK_REQ_LIST_CLEAR ); +ufshcd_writel (hba, ~(1 << pos),REG_UTP_TASK_REQ_LIST_CLEAR ); }/**
@@ -2093,13 +2086,8 @@ static int ufshcd_map_sg(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)return sg_segments;if (sg_segments) { -if (hba->quirks &UFSHCD_QUIRK_PRDT_BYTE_GRAN ) - lrbp->utr_descriptor_ptr->prd_table_length = -cpu_to_le16 ((u16)(sg_segments * -sizeof (struct ufshcd_sg_entry ))); -else - lrbp->utr_descriptor_ptr->prd_table_length = -cpu_to_le16 ((u16) (sg_segments)); + lrbp->utr_descriptor_ptr->prd_table_length = +cpu_to_le16 ((u16) (sg_segments)); prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr;
@@ -3403,21 +3391,12 @@ static void ufshcd_host_memory_configure(struct ufs_hba *hba)cpu_to_le32 (upper_32_bits (cmd_desc_element_addr));/* Response upiu and prdt offset should be in double words */ -if (hba->quirks &UFSHCD_QUIRK_PRDT_BYTE_GRAN ) { - utrdlp[i].response_upiu_offset = -cpu_to_le16 (response_offset); - utrdlp[i].prd_table_offset = -cpu_to_le16 (prdt_offset); - utrdlp[i].response_upiu_length = -cpu_to_le16 (ALIGNED_UPIU_SIZE ); - }else { - utrdlp[i].response_upiu_offset = -cpu_to_le16 ((response_offset >>2 )); - utrdlp[i].prd_table_offset = -cpu_to_le16 ((prdt_offset >>2 )); - utrdlp[i].response_upiu_length = -cpu_to_le16 (ALIGNED_UPIU_SIZE >>2 ); - } + utrdlp[i].response_upiu_offset = +cpu_to_le16 ((response_offset >>2 )); + utrdlp[i].prd_table_offset = +cpu_to_le16 ((prdt_offset >>2 )); + utrdlp[i].response_upiu_length = +cpu_to_le16 (ALIGNED_UPIU_SIZE >>2 ); hba->lrb[i].utr_descriptor_ptr = (utrdlp + i); hba->lrb[i].utrd_dma_addr = hba->utrdl_dma_addr +
@@ -3460,52 +3439,6 @@ static int ufshcd_dme_link_startup(struct ufs_hba *hba) "dme-link-startup: error code %d\n", ret);return ret; } -/** -* ufshcd_dme_reset - UIC command for DME_RESET -* @hba: per adapter instance -* -* DME_RESET command is issued in order to reset UniPro stack. -* This function now deal with cold reset. -* -* Returns 0 on success, non-zero value on failure -*/ -static int ufshcd_dme_reset (struct ufs_hba *hba) -{ -struct uic_command uic_cmd = {0 }; -int ret; - - uic_cmd.command =UIC_CMD_DME_RESET ; - - ret =ufshcd_send_uic_cmd (hba, &uic_cmd); -if (ret) -dev_err (hba->dev, -"dme-reset: error code %d\n" , ret); - -return ret; -} - -/** -* ufshcd_dme_enable - UIC command for DME_ENABLE -* @hba: per adapter instance -* -* DME_ENABLE command is issued in order to enable UniPro stack. -* -* Returns 0 on success, non-zero value on failure -*/ -static int ufshcd_dme_enable (struct ufs_hba *hba) -{ -struct uic_command uic_cmd = {0 }; -int ret; - - uic_cmd.command =UIC_CMD_DME_ENABLE ; - - ret =ufshcd_send_uic_cmd (hba, &uic_cmd); -if (ret) -dev_err (hba->dev, -"dme-reset: error code %d\n" , ret); - -return ret; -}static inline void ufshcd_add_delay_before_dme_cmd (struct ufs_hba *hba) {
@@ -4217,7 +4150,7 @@ static inline void ufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep) }/** -* ufshcd_hba_execute_hce - initialize the controller +* ufshcd_hba_enable - initialize the controller * @hba: per adapter instance * * The controller resets itself and controller firmware initialization
@@ -4226,7 +4159,7 @@ static inline void ufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep)* * Returns 0 on success, non-zero value on failure */ -static int ufshcd_hba_execute_hce (struct ufs_hba *hba) +int ufshcd_hba_enable (struct ufs_hba *hba) {int retry;
@@ -4274,32 +4207,6 @@ static int ufshcd_hba_execute_hce(struct ufs_hba *hba)return 0 ; } - -int ufshcd_hba_enable (struct ufs_hba *hba) -{ -int ret; - -if (hba->quirks &UFSHCI_QUIRK_BROKEN_HCE ) { -ufshcd_set_link_off (hba); -ufshcd_vops_hce_enable_notify (hba,PRE_CHANGE ); - -/* enable UIC related interrupts */ -ufshcd_enable_intr (hba,UFSHCD_UIC_MASK ); - ret =ufshcd_dme_reset (hba); -if (!ret) { - ret =ufshcd_dme_enable (hba); -if (!ret) -ufshcd_vops_hce_enable_notify (hba,POST_CHANGE ); -if (ret) -dev_err (hba->dev, -"Host controller enable failed with non-hce\n" ); - } - }else { - ret =ufshcd_hba_execute_hce (hba); - } - -return ret; -}EXPORT_SYMBOL_GPL (ufshcd_hba_enable);static int ufshcd_disable_tx_lcc (struct ufs_hba *hba,bool peer)
@@ -4869,8 +4776,7 @@ static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba)* false interrupt if device completes another request after resetting * aggregation and before reading the DB. */ -if (ufshcd_is_intr_aggr_allowed (hba) && - !(hba->quirks &UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR )) +if (ufshcd_is_intr_aggr_allowed (hba))ufshcd_reset_intr_aggr (hba); tr_doorbell =ufshcd_readl (hba,REG_UTP_TRANSFER_REQ_DOOR_BELL );
drivers/scsi/ufs/ufshcd.h +0 -22
@@ -612,28 +612,6 @@ struct ufs_hba {*/ #define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION 0x20 -/* -* This quirk needs to be enabled if the host contoller regards -* resolution of the values of PRDTO and PRDTL in UTRD as byte. -*/ -#define UFSHCD_QUIRK_PRDT_BYTE_GRAN 0x80 - -/* -* Clear handling for transfer/task request list is just opposite. -*/ -#define UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR 0x100 - -/* -* This quirk needs to be enabled if host controller doesn't allow -* that the interrupt aggregation timer and counter are reset by s/w. -*/ -#define UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR 0x200 - -/* -* This quirks needs to be enabled if host controller cannot be -* enabled via HCE register. -*/ -#define UFSHCI_QUIRK_BROKEN_HCE 0x400unsigned int quirks;/* Deviations from standard UFSHCI spec. */ /* Device deviations from standard UFS device spec. */
Signature · 1 line
2.24.1
RE: [PATCH 1/2] ufshcd: remove unused quirks
Quoted 39 lines
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Christoph Hellwig
Sent: Wednesday, February 19, 2020 8:45 AM
To: [email protected]
Cc: Alim Akhtar <[email protected]>; Avri Altman <[email protected]>
Subject: [PATCH 1/2] ufshcd: remove unused quirksRemove various quirks that don't have users, as well as the dead code keyed off them.
Signed-off-by Christoph Hellwig <[email protected]>--- drivers/scsi/ufs/ufshcd.c | 120 +++++--------------------------------- drivers/scsi/ufs/ufshcd.h | 22 ------- 2 files changed, 13 insertions(+), 129 deletions(-)drivers/scsi/ufs/ufshcd.c index renamed from drivers/scsi/ufs/ufshcd.c +0
-0
abd0e6b05f79..2eb86851af7a100644drivers/scsi/ufs/ufshcd.c +1
-5@@ -642,11 +642,7 @@ static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb*lrbp) */ static inline void ufshcd_utrl_clear (struct ufs_hba *hba,u32 pos) { -if (hba->quirks &UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR ) -ufshcd_writel (hba, (1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR); -else -ufshcd_writel (hba, ~(1 << pos), -REG_UTP_TRANSFER_REQ_LIST_CLEAR ); +ufshcd_writel (hba, (1 << pos),REG_UTP_TRANSFER_REQ_LIST_CLEAR ); }/**
drivers/scsi/ufs/ufshcd.c static inline void ufshcd_utrl_clear(struct ufs_hba · line 662
Quoted 7 lines
drivers/scsi/ufs/ufshcd.c +0
-4@@ -656,10 +652,7 @@ static inline void ufshcd_utrl_clear(struct ufs_hba*hba, u32 pos) */ static inline void ufshcd_utmrl_clear (struct ufs_hba *hba,u32 pos) { -if (hba->quirks &UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR ) -ufshcd_writel (hba, (1 << pos),REG_UTP_TASK_REQ_LIST_CLEAR ); -else - ufshcd_writel(hba, ~(1 << pos),
REG_UTP_TASK_REQ_LIST_CLEAR);
Quoted 131 lines
drivers/scsi/ufs/ufshcd.c +9
-22+ufshcd_writel (hba, ~(1 << pos),REG_UTP_TASK_REQ_LIST_CLEAR ); }/** @@ -2093,13 +2086,8 @@ static int ufshcd_map_sg(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)return sg_segments;if (sg_segments) { -if (hba->quirks &UFSHCD_QUIRK_PRDT_BYTE_GRAN ) - lrbp->utr_descriptor_ptr->prd_table_length = -cpu_to_le16 ((u16)(sg_segments * -sizeof (struct ufshcd_sg_entry ))); -else - lrbp->utr_descriptor_ptr->prd_table_length = -cpu_to_le16 ((u16) (sg_segments)); + lrbp->utr_descriptor_ptr->prd_table_length = +cpu_to_le16 ((u16) (sg_segments)); prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr;@@ -3403,21 +3391,12 @@ static void ufshcd_host_memory_configure(struct ufs_hba *hba)cpu_to_le32 (upper_32_bits (cmd_desc_element_addr ));/* Response upiu and prdt offset should be in double words */ -if (hba->quirks &UFSHCD_QUIRK_PRDT_BYTE_GRAN ) { - utrdlp[i].response_upiu_offset = -cpu_to_le16 (response_offset); - utrdlp[i].prd_table_offset = -cpu_to_le16 (prdt_offset); - utrdlp[i].response_upiu_length = -cpu_to_le16 (ALIGNED_UPIU_SIZE ); - }else { - utrdlp[i].response_upiu_offset = -cpu_to_le16 ((response_offset >>2 )); - utrdlp[i].prd_table_offset = -cpu_to_le16 ((prdt_offset >>2 )); - utrdlp[i].response_upiu_length = -cpu_to_le16 (ALIGNED_UPIU_SIZE >>2 ); - } + utrdlp[i].response_upiu_offset = +cpu_to_le16 ((response_offset >>2 )); + utrdlp[i].prd_table_offset = +cpu_to_le16 ((prdt_offset >>2 )); + utrdlp[i].response_upiu_length = +cpu_to_le16 (ALIGNED_UPIU_SIZE >>2 );drivers/scsi/ufs/ufshcd.c +0
-0hba->lrb[i].utr_descriptor_ptr = (utrdlp + i); hba->lrb[i].utrd_dma_addr = hba->utrdl_dma_addr + @@ -3460,52 +3439,6 @@ static int
ufshcd_dme_link_startup(struct ufs_hba *hba)drivers/scsi/ufs/ufshcd.c +0
-44"dme-link-startup: error code %d\n", ret);return ret; } -/** -* ufshcd_dme_reset - UIC command for DME_RESET -* @hba: per adapter instance -* -* DME_RESET command is issued in order to reset UniPro stack. -* This function now deal with cold reset. -* -* Returns 0 on success, non-zero value on failure -*/ -static int ufshcd_dme_reset(struct ufs_hba *hba) -{ -struct uic_command uic_cmd = {0 }; -int ret; - - uic_cmd.command =UIC_CMD_DME_RESET ; - - ret =ufshcd_send_uic_cmd (hba, &uic_cmd); -if (ret) -dev_err (hba->dev, -"dme-reset: error code %d\n" , ret); - -return ret; -} - -/** -* ufshcd_dme_enable - UIC command for DME_ENABLE -* @hba: per adapter instance -* -* DME_ENABLE command is issued in order to enable UniPro stack. -* -* Returns 0 on success, non-zero value on failure -*/ -static int ufshcd_dme_enable(struct ufs_hba *hba) -{ -struct uic_command uic_cmd = {0 }; -int ret; - - uic_cmd.command =UIC_CMD_DME_ENABLE ; - - ret =ufshcd_send_uic_cmd (hba, &uic_cmd); -if (ret) -dev_err (hba->dev, -"dme-reset: error code %d\n" , ret); - -return ret; -}static inline void ufshcd_add_delay_before_dme_cmd (struct ufs_hba *hba){ @@ -4217,7 +4150,7 @@ static inline void
ufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep)}/**
- *ufshcd_hba_execute_hce- initialize the controller
+ *ufshcd_hba_enable- initialize the controller
* @hba: per adapter instance
*
* The controller resets itself and controller firmware initialization @@
-4226,7 +4159,7 @@ static inline voidufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep)
*
* Returns 0 on success, non-zero value on failure
*/drivers/scsi/ufs/ufshcd.c +1
-6-static int ufshcd_hba_execute_hce (struct ufs_hba *hba) +int ufshcd_hba_enable (struct ufs_hba *hba) {int retry;@@ -4274,32 +4207,6 @@ static int ufshcd_hba_execute_hce(struct ufs_hba *hba)return 0 ; } - -int ufshcd_hba_enable(struct ufs_hba *hba) -{ -int ret; - -if (hba->quirks &UFSHCI_QUIRK_BROKEN_HCE ) {
drivers/scsi/ufs/ufshcd.c static int ufshcd_hba_execute_hce(struct ufs_hba · line 4292
Quoted 10 lines
drivers/scsi/ufs/ufshcd.c +0
-10-ufshcd_set_link_off (hba); -ufshcd_vops_hce_enable_notify (hba,PRE_CHANGE ); - -/* enable UIC related interrupts */ -ufshcd_enable_intr (hba,UFSHCD_UIC_MASK ); - ret =ufshcd_dme_reset (hba); -if (!ret) { - ret =ufshcd_dme_enable (hba); -if (!ret) - ufshcd_vops_hce_enable_notify(hba,
POST_CHANGE);
drivers/scsi/ufs/ufshcd.c static int ufshcd_dme_link_startup(struct ufs_hba *hba)
Quoted 3 lines
drivers/scsi/ufs/ufshcd.c +0
-3-if (ret) - dev_err(hba->dev, - "Host controller enable failed with
non-
Quoted 60 lines
drivers/scsi/ufs/ufshcd.c +0
-7hce\n"); - } - }else { - ret =ufshcd_hba_execute_hce (hba); - } - -return ret; -}EXPORT_SYMBOL_GPL (ufshcd_hba_enable); static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer) @@ -4869,8 +4776,7 @@ static
irqreturn_tufshcd_transfer_req_compl(struct ufs_hba *hba)
* false interrupt if device completes another request after
resettingdrivers/scsi/ufs/ufshcd.c +1
-2* aggregation and before reading the DB. */ -if (ufshcd_is_intr_aggr_allowed (hba) && - !(hba->quirks &UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR )) +if (ufshcd_is_intr_aggr_allowed (hba))ufshcd_reset_intr_aggr (hba); tr_doorbell =ufshcd_readl (hba,REG_UTP_TRANSFER_REQ_DOOR_BELL );drivers/scsi/ufs/ufshcd.h index renamed from drivers/scsi/ufs/ufshcd.h +0
-0
2ae6c7c8528c..9c2b80f87b9f100644drivers/scsi/ufs/ufshcd.h +0
-14@@ -612,28 +612,6 @@ struct ufs_hba {*/ #define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION 0x20 -/* -* This quirk needs to be enabled if the host contoller regards -* resolution of the values of PRDTO and PRDTL in UTRD as byte. -*/ -#define UFSHCD_QUIRK_PRDT_BYTE_GRAN 0x80 - -/* -* Clear handling for transfer/task request list is just opposite. -*/ -#define UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR 0x100 - -/* -* This quirk needs to be enabled if host controller doesn't allow -* that the interrupt aggregation timer and counter are reset by s/w.
drivers/scsi/ufs/ufshcd.h +0
-8-*/ -#define UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR 0x200 - -/* -* This quirks needs to be enabled if host controller cannot be -* enabled via HCE register. -*/ -#define UFSHCI_QUIRK_BROKEN_HCE 0x400unsigned int quirks;/* Deviations from standard UFSHCI spec. */
/* Device deviations from standard UFS device spec. */
--
2.24.1
RE: [PATCH 1/2] ufshcd: remove unused quirks
In reply to Christoph HellwigQuoted 36 lines
From: [email protected] <[email protected]> On Behalf Of Christoph Hellwig
Sent: Wednesday, February 19, 2020 8:45 AM
To: [email protected]
Cc: Alim Akhtar <[email protected]>; Avri Altman <[email protected]>
Subject: [PATCH 1/2] ufshcd: remove unused quirksRemove various quirks that don't have users, as well as the dead code keyed off them.
Signed-off-by Christoph Hellwig <[email protected]>--- drivers/scsi/ufs/ufshcd.c | 120 +++++--------------------------------- drivers/scsi/ufs/ufshcd.h | 22 ------- 2 files changed, 13 insertions(+), 129 deletions(-)drivers/scsi/ufs/ufshcd.c index renamed from drivers/scsi/ufs/ufshcd.c +0
-0
abd0e6b05f79..2eb86851af7a100644drivers/scsi/ufs/ufshcd.c +1
-5@@ -642,11 +642,7 @@ static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb*lrbp) */ static inline void ufshcd_utrl_clear (struct ufs_hba *hba,u32 pos) { -if (hba->quirks &UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR ) -ufshcd_writel (hba, (1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR); -else -ufshcd_writel (hba, ~(1 << pos), -REG_UTP_TRANSFER_REQ_LIST_CLEAR ); +ufshcd_writel (hba, (1 << pos),REG_UTP_TRANSFER_REQ_LIST_CLEAR ); }/**
drivers/scsi/ufs/ufshcd.c static inline void ufshcd_utrl_clear(struct ufs_hba · line 662
Quoted 7 lines
drivers/scsi/ufs/ufshcd.c +0
-4@@ -656,10 +652,7 @@ static inline void ufshcd_utrl_clear(struct ufs_hba*hba, u32 pos) */ static inline void ufshcd_utmrl_clear (struct ufs_hba *hba,u32 pos) { -if (hba->quirks &UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR ) -ufshcd_writel (hba, (1 << pos),REG_UTP_TASK_REQ_LIST_CLEAR ); -else - ufshcd_writel(hba, ~(1 << pos),
REG_UTP_TASK_REQ_LIST_CLEAR);
Quoted 131 lines
drivers/scsi/ufs/ufshcd.c +9
-22+ufshcd_writel (hba, ~(1 << pos),REG_UTP_TASK_REQ_LIST_CLEAR ); }/** @@ -2093,13 +2086,8 @@ static int ufshcd_map_sg(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)return sg_segments;if (sg_segments) { -if (hba->quirks &UFSHCD_QUIRK_PRDT_BYTE_GRAN ) - lrbp->utr_descriptor_ptr->prd_table_length = -cpu_to_le16 ((u16)(sg_segments * -sizeof (struct ufshcd_sg_entry ))); -else - lrbp->utr_descriptor_ptr->prd_table_length = -cpu_to_le16 ((u16) (sg_segments)); + lrbp->utr_descriptor_ptr->prd_table_length = +cpu_to_le16 ((u16) (sg_segments)); prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr;@@ -3403,21 +3391,12 @@ static void ufshcd_host_memory_configure(struct ufs_hba *hba)cpu_to_le32 (upper_32_bits (cmd_desc_element_addr ));/* Response upiu and prdt offset should be in double words */ -if (hba->quirks &UFSHCD_QUIRK_PRDT_BYTE_GRAN ) { - utrdlp[i].response_upiu_offset = -cpu_to_le16 (response_offset); - utrdlp[i].prd_table_offset = -cpu_to_le16 (prdt_offset); - utrdlp[i].response_upiu_length = -cpu_to_le16 (ALIGNED_UPIU_SIZE ); - }else { - utrdlp[i].response_upiu_offset = -cpu_to_le16 ((response_offset >>2 )); - utrdlp[i].prd_table_offset = -cpu_to_le16 ((prdt_offset >>2 )); - utrdlp[i].response_upiu_length = -cpu_to_le16 (ALIGNED_UPIU_SIZE >>2 ); - } + utrdlp[i].response_upiu_offset = +cpu_to_le16 ((response_offset >>2 )); + utrdlp[i].prd_table_offset = +cpu_to_le16 ((prdt_offset >>2 )); + utrdlp[i].response_upiu_length = +cpu_to_le16 (ALIGNED_UPIU_SIZE >>2 );drivers/scsi/ufs/ufshcd.c +0
-0hba->lrb[i].utr_descriptor_ptr = (utrdlp + i); hba->lrb[i].utrd_dma_addr = hba->utrdl_dma_addr + @@ -3460,52 +3439,6 @@ static int
ufshcd_dme_link_startup(struct ufs_hba *hba)drivers/scsi/ufs/ufshcd.c +0
-44"dme-link-startup: error code %d\n", ret);return ret; } -/** -* ufshcd_dme_reset - UIC command for DME_RESET -* @hba: per adapter instance -* -* DME_RESET command is issued in order to reset UniPro stack. -* This function now deal with cold reset. -* -* Returns 0 on success, non-zero value on failure -*/ -static int ufshcd_dme_reset(struct ufs_hba *hba) -{ -struct uic_command uic_cmd = {0 }; -int ret; - - uic_cmd.command =UIC_CMD_DME_RESET ; - - ret =ufshcd_send_uic_cmd (hba, &uic_cmd); -if (ret) -dev_err (hba->dev, -"dme-reset: error code %d\n" , ret); - -return ret; -} - -/** -* ufshcd_dme_enable - UIC command for DME_ENABLE -* @hba: per adapter instance -* -* DME_ENABLE command is issued in order to enable UniPro stack. -* -* Returns 0 on success, non-zero value on failure -*/ -static int ufshcd_dme_enable(struct ufs_hba *hba) -{ -struct uic_command uic_cmd = {0 }; -int ret; - - uic_cmd.command =UIC_CMD_DME_ENABLE ; - - ret =ufshcd_send_uic_cmd (hba, &uic_cmd); -if (ret) -dev_err (hba->dev, -"dme-reset: error code %d\n" , ret); - -return ret; -}static inline void ufshcd_add_delay_before_dme_cmd (struct ufs_hba *hba){ @@ -4217,7 +4150,7 @@ static inline void
ufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep)}/**
- *ufshcd_hba_execute_hce- initialize the controller
+ *ufshcd_hba_enable- initialize the controller
* @hba: per adapter instance
*
* The controller resets itself and controller firmware initialization @@
-4226,7 +4159,7 @@ static inline voidufshcd_hba_stop(struct ufs_hba *hba, bool can_sleep)
*
* Returns 0 on success, non-zero value on failure
*/drivers/scsi/ufs/ufshcd.c +1
-6-static int ufshcd_hba_execute_hce (struct ufs_hba *hba) +int ufshcd_hba_enable (struct ufs_hba *hba) {int retry;@@ -4274,32 +4207,6 @@ static int ufshcd_hba_execute_hce(struct ufs_hba *hba)return 0 ; } - -int ufshcd_hba_enable(struct ufs_hba *hba) -{ -int ret; - -if (hba->quirks &UFSHCI_QUIRK_BROKEN_HCE ) {
drivers/scsi/ufs/ufshcd.c static int ufshcd_hba_execute_hce(struct ufs_hba · line 4292
Quoted 10 lines
drivers/scsi/ufs/ufshcd.c +0
-10-ufshcd_set_link_off (hba); -ufshcd_vops_hce_enable_notify (hba,PRE_CHANGE ); - -/* enable UIC related interrupts */ -ufshcd_enable_intr (hba,UFSHCD_UIC_MASK ); - ret =ufshcd_dme_reset (hba); -if (!ret) { - ret =ufshcd_dme_enable (hba); -if (!ret) - ufshcd_vops_hce_enable_notify(hba,
POST_CHANGE);
drivers/scsi/ufs/ufshcd.c static int ufshcd_dme_link_startup(struct ufs_hba *hba)
Quoted 3 lines
drivers/scsi/ufs/ufshcd.c +0
-3-if (ret) - dev_err(hba->dev, - "Host controller enable failed with
non-
Quoted 57 lines
drivers/scsi/ufs/ufshcd.c +0
-7hce\n"); - } - }else { - ret =ufshcd_hba_execute_hce (hba); - } - -return ret; -}EXPORT_SYMBOL_GPL (ufshcd_hba_enable); static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer) @@ -4869,8 +4776,7 @@ static
irqreturn_tufshcd_transfer_req_compl(struct ufs_hba *hba)
* false interrupt if device completes another request after
resettingdrivers/scsi/ufs/ufshcd.c +1
-2* aggregation and before reading the DB. */ -if (ufshcd_is_intr_aggr_allowed (hba) && - !(hba->quirks &UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR )) +if (ufshcd_is_intr_aggr_allowed (hba))ufshcd_reset_intr_aggr (hba); tr_doorbell =ufshcd_readl (hba,REG_UTP_TRANSFER_REQ_DOOR_BELL );drivers/scsi/ufs/ufshcd.h index renamed from drivers/scsi/ufs/ufshcd.h +0
-0
2ae6c7c8528c..9c2b80f87b9f100644drivers/scsi/ufs/ufshcd.h +0
-14@@ -612,28 +612,6 @@ struct ufs_hba {*/ #define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION 0x20 -/* -* This quirk needs to be enabled if the host contoller regards -* resolution of the values of PRDTO and PRDTL in UTRD as byte. -*/ -#define UFSHCD_QUIRK_PRDT_BYTE_GRAN 0x80 - -/* -* Clear handling for transfer/task request list is just opposite. -*/ -#define UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR 0x100 - -/* -* This quirk needs to be enabled if host controller doesn't allow -* that the interrupt aggregation timer and counter are reset by s/w.
drivers/scsi/ufs/ufshcd.h +0
-8-*/ -#define UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR 0x200 - -/* -* This quirks needs to be enabled if host controller cannot be -* enabled via HCE register. -*/ -#define UFSHCI_QUIRK_BROKEN_HCE 0x400unsigned int quirks;/* Deviations from standard UFSHCI spec. */
Quoted 3 lines
/* Device deviations from standard UFS device spec. */
--
2.24.1
Exynos specific driver sets and is using the following quirks but the driver is not updated
yet. I'll do upstream it in the future.
- UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR
- UFSHCD_QUIRK_PRDT_BYTE_GRAN
- UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR
Re: [PATCH 1/2] ufshcd: remove unused quirks
Quoted 7 lines · Kiwoong Kim
Exynos specific driver sets and is using the following quirks but the driver is not updated
yet. I'll do upstream it in the future.
-UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR
-UFSHCD_QUIRK_PRDT_BYTE_GRAN
-UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR
These quirks have been there for 2-3 years without the driver that needs them even being posted to the mailing list since 2017. Since we don't keep unused code in the upstream kernel, I support the removal of these quirks. If you don't want them to be removed, you need to get your driver upstream.
- Eric
Re: [PATCH 1/2] ufshcd: remove unused quirks
Hi Eric
Quoted 10 lines · Eric Biggers
Quoted 7 lines · Kiwoong Kim
Exynos specific driver sets and is using the following quirks but the driver is not updated
yet. I'll do upstream it in the future.
-UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR
-UFSHCD_QUIRK_PRDT_BYTE_GRAN
-UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR
Quoted 5 lines
These quirks have been there for 2-3 years without the driver that needs them even being posted to the mailing list since 2017. Since we don't keep unused code in the upstream kernel, I support the removal of these quirks. If you don't want them to be removed, you need to get your driver upstream.
Yes, understand it got delayed significantly, we will try to send driver after fixing the previous review comments. Thanks for heads-up.
Quoted 1 line
- Eric
Signature · 2 lines
Regards, Alim
Re: [PATCH 1/2] ufshcd: remove unused quirks
In reply to Eric BiggersQuoted 4 lines · Eric Biggers
These quirks have been there for 2-3 years without the driver that needs them even being posted to the mailing list since 2017. Since we don't keep unused code in the upstream kernel, I support the removal of these quirks. If you don't want them to be removed, you need to get your driver upstream.
Yes. And some of them could be improved a little bit as well if they get added back. But given that this didn't happen in all the years I do not mentally expect the driver to ever make it anyway.
Re: [PATCH 1/2] ufshcd: remove unused quirks
In reply to Christoph Hellwigdrivers/scsi/ufs/ufshcd.c static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp) · line 646
Quoted 9 lines · Christoph Hellwig
static inline void
ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos){drivers/scsi/ufs/ufshcd.c +1
-5-if (hba->quirks &UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR ) -ufshcd_writel (hba, (1 << pos),REG_UTP_TRANSFER_REQ_LIST_CLEAR ); -else -ufshcd_writel (hba, ~(1 << pos), -REG_UTP_TRANSFER_REQ_LIST_CLEAR ); +ufshcd_writel (hba, (1 << pos),REG_UTP_TRANSFER_REQ_LIST_CLEAR ); }
This part is keeping the quirk version. It needs to be other way around.
- Eric
Re: [PATCH 1/2] ufshcd: remove unused quirks
Quoted 12 lines · Eric Biggers
drivers/scsi/ufs/ufshcd.c static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp) · line 646
Quoted 9 lines · Christoph Hellwig
static inline void
ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos){drivers/scsi/ufs/ufshcd.c +1
-5-if (hba->quirks &UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR ) -ufshcd_writel (hba, (1 << pos),REG_UTP_TRANSFER_REQ_LIST_CLEAR ); -else -ufshcd_writel (hba, ~(1 << pos), -REG_UTP_TRANSFER_REQ_LIST_CLEAR ); +ufshcd_writel (hba, (1 << pos),REG_UTP_TRANSFER_REQ_LIST_CLEAR ); }This part is keeping the quirk version. It needs to be other way around.
Fixed.
PATCH 2/2 ufshcd: use an enum for quirks
In reply to Christoph HellwigUse an enum to specify the various quirks instead of #defines inside the structure definition.
--- drivers/scsi/ufs/ufshcd.h | 82 ++++++++++++++++++++------------------- 1 file changed, 42 insertions(+), 40 deletions(-)
drivers/scsi/ufs/ufshcd.h +42 -40
@@ -469,6 +469,48 @@ struct ufs_stats {struct ufs_err_reg_hist task_abort; }; +enum ufshcd_quirks { +/* Interrupt aggregation support is broken */ +UFSHCD_QUIRK_BROKEN_INTR_AGGR =1 <<0 , + +/* +* delay before each dme command is required as the unipro +* layer has shown instabilities +*/ +UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS =1 <<1 , + +/* +* If UFS host controller is having issue in processing LCC (Line +* Control Command) coming from device then enable this quirk. +* When this quirk is enabled, host controller driver should disable +* the LCC transmission on UFS device (by clearing TX_LCC_ENABLE +* attribute of device to 0). +*/ +UFSHCD_QUIRK_BROKEN_LCC =1 <<2 , + +/* +* The attribute PA_RXHSUNTERMCAP specifies whether or not the +* inbound Link supports unterminated line in HS mode. Setting this +* attribute to 1 fixes moving to HS gear. +*/ +UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP =1 <<3 , + +/* +* This quirk needs to be enabled if the host contoller only allows +* accessing the peer dme attributes in AUTO mode (FAST AUTO or +* SLOW AUTO). +*/ +UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE =1 <<4 , + +/* +* This quirk needs to be enabled if the host contoller doesn't +* advertise the correct version in UFS_VER register. If this quirk +* is enabled, standard UFS host driver will call the vendor specific +* ops (get_ufs_hci_version) to get the correct version. +*/ +UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION =1 <<5 , +}; +/** * struct ufs_hba - per adapter private structure * @mmio_base: UFSHCI base register address
@@ -572,46 +614,6 @@ struct ufs_hba {bool is_irq_enabled;enum ufs_ref_clk_freq dev_ref_clk_freq; -/* Interrupt aggregation support is broken */ -#define UFSHCD_QUIRK_BROKEN_INTR_AGGR 0x1 - -/* -* delay before each dme command is required as the unipro -* layer has shown instabilities -*/ -#define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS 0x2 - -/* -* If UFS host controller is having issue in processing LCC (Line -* Control Command) coming from device then enable this quirk. -* When this quirk is enabled, host controller driver should disable -* the LCC transmission on UFS device (by clearing TX_LCC_ENABLE -* attribute of device to 0). -*/ -#define UFSHCD_QUIRK_BROKEN_LCC 0x4 - -/* -* The attribute PA_RXHSUNTERMCAP specifies whether or not the -* inbound Link supports unterminated line in HS mode. Setting this -* attribute to 1 fixes moving to HS gear. -*/ -#define UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP 0x8 - -/* -* This quirk needs to be enabled if the host contoller only allows -* accessing the peer dme attributes in AUTO mode (FAST AUTO or -* SLOW AUTO). -*/ -#define UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE 0x10 - -/* -* This quirk needs to be enabled if the host contoller doesn't -* advertise the correct version in UFS_VER register. If this quirk -* is enabled, standard UFS host driver will call the vendor specific -* ops (get_ufs_hci_version) to get the correct version. -*/ -#define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION 0x20 -unsigned int quirks;/* Deviations from standard UFSHCI spec. */ /* Device deviations from standard UFS device spec. */
Signature · 1 line
2.24.1
Re: [PATCH 2/2] ufshcd: use an enum for quirks
Quoted 2 lines · Christoph Hellwig
Use an enum to specify the various quirks instead of #defines inside the structure definition.
Hi Christoph,
Although this patch looks like a significant improvement to me: has it been considered to change 'quirks' from an unsigned int into a bitfield with one bit per quirk? I think that would allow to remove multiple explicit bit manipulations from the UFS driver.
Thanks,
Bart.
Re: [PATCH 2/2] ufshcd: use an enum for quirks
Quoted 10 lines · Bart Van Assche
Quoted 2 lines · Christoph Hellwig
Use an enum to specify the various quirks instead of #defines inside the structure definition.
Hi Christoph,
Although this patch looks like a significant improvement to me: has it been considered to change 'quirks' from an unsigned int into a bitfield with one bit per quirk? I think that would allow to remove multiple explicit bit manipulations from the UFS driver.
And it wouldn't make it quite as obvious what are quirks. Never mind that the compiler would still do the masking and potentially affect other fields placed right next to it. Bitfields tend to be a bad idea just about everywhere.