Skip to contentSkip to conversation

x86: Improve support for chain-loading U-Boot

PATCH Superseded Simon Glass 3 participants 9 messages Feb 19, 2020 – Mar 2, 2020

Subsystems (2)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover x86: Improve support for chain-loading U-Boot

This little series adds a few checks into the code to allow better operation when booting a build from a previous-state loader such as coreboot.

At present we have a 'coreboot' target but this runs very different code from the bare-metal targets, such as coral. There is very little in common between them.

It is useful to be able to boot the same U-Boot on a device, with or without a first-stage bootloader. For example, with chromebook_coral, it is helpful for testing to be able to boot the same U-Boot (complete with FSP) on bare metal and from coreboot. It allows checking of things like CPU speed, comparing registers, ACPI tables and the like.

The idea is to change ll_boot_init() to false, and rebuild without changing anything else.

This series makes the most important changes to allow coral to boot on coreboot.

Changes in v2:
- Drop the other check in interrupt_init() which is not needed now
- Drop patch 'dm: Avoid initing built-in devices when chain loading'

Simon Glass (4):
x86: fsp: Allow skipping init code when chain loading
x86: apl: Skip init code when chain loading
x86: cpu: Skip init code when chain loading
pci: Avoid auto-config when chain loading

 arch/x86/cpu/apollolake/fsp_s.c |  2 ++
 arch/x86/cpu/cpu.c              |  4 +++-
 arch/x86/cpu/i386/interrupt.c   |  6 ++++--
 arch/x86/lib/fsp/fsp_dram.c     |  8 ++++++++
 arch/x86/lib/fsp/fsp_graphics.c |  3 +++
 arch/x86/lib/fsp2/fsp_dram.c    | 10 ++++++++++
 arch/x86/lib/fsp2/fsp_init.c    |  2 +-
 arch/x86/lib/init_helpers.c     |  3 +++
 drivers/pci/pci-uclass.c        |  4 ++--
 9 files changed, 36 insertions(+), 6 deletions(-)
Signature · 1 line
2.25.0.265.gbab2e86ba0-goog
#1 lore raw

PATCH v2 1/4 x86: fsp: Allow skipping init code when chain loading

It is useful to be able to boot the same x86 image on a device with or without a first-stage bootloader. For example, with chromebook_coral, it is helpful for testing to be able to boot the same U-Boot (complete with FSP) on bare metal and from coreboot. It allows checking of things like CPU speed, comparing registers, ACPI tables and the like.

When U-Boot is not the first-stage bootloader much of this code is not needed and can break booting. Add checks for this to the FSP code.

Rather than checking for the amount of available SDRAM, just use 1GB in this situation, which should be safe. Using 2GB may run into a memory hole on some SoCs.

---

Changes in v2: None

 arch/x86/lib/fsp/fsp_dram.c     |  8 ++++++++
 arch/x86/lib/fsp/fsp_graphics.c |  3 +++
 arch/x86/lib/fsp2/fsp_dram.c    | 10 ++++++++++
 arch/x86/lib/fsp2/fsp_init.c    |  2 +-
 4 files changed, 22 insertions(+), 1 deletion(-)
arch/x86/lib/fsp/fsp_dram.c +8 -0
index 9ce0ddf0d3..15e82de2fe 100644
@@ -44,6 +44,14 @@ int dram_init_banksize(void)
 	phys_addr_t low_end;
 	uint bank;
 
+	if (!ll_boot_init()) {
+		gd->bd->bi_dram[0].start = 0;
+		gd->bd->bi_dram[0].size = gd->ram_size;
+
+		mtrr_add_request(MTRR_TYPE_WRBACK, 0, gd->ram_size);
+		return 0;
+	}
+
 	low_end = 0;
 	for (bank = 1, hdr = gd->arch.hob_list;
 	     bank < CONFIG_NR_DRAM_BANKS && !end_of_hob(hdr);
arch/x86/lib/fsp/fsp_graphics.c +3 -0
index 226c7e66b3..98b762209f 100644
@@ -78,6 +78,9 @@ static int fsp_video_probe(struct udevice *dev)
 	struct vesa_mode_info *vesa = &mode_info.vesa;
 	int ret;
 
+	if (!ll_boot_init())
+		return 0;
+
 	printf("Video: ");
 
 	/* Initialize vesa_mode_info structure */
arch/x86/lib/fsp2/fsp_dram.c +10 -0
index 90a238a224..74835eebce 100644
@@ -12,11 +12,18 @@
 #include <asm/fsp/fsp_support.h>
 #include <asm/fsp2/fsp_api.h>
 #include <asm/fsp2/fsp_internal.h>
+#include <linux/sizes.h>
 
 int dram_init(void)
 {
 	int ret;
 
+	if (!ll_boot_init()) {
+		/* Use a small and safe amount of 1GB */
+		gd->ram_size = SZ_1G;
+
+		return 0;
+	}
 	if (spl_phase() == PHASE_SPL) {
 #ifdef CONFIG_HAVE_ACPI_RESUME
 		bool s3wake = gd->arch.prev_sleep_state == ACPI_S3;
@@ -68,6 +75,9 @@ int dram_init(void)
 
 ulong board_get_usable_ram_top(ulong total_size)
 {
+	if (!ll_boot_init())
+		return gd->ram_size;
+
 #if CONFIG_IS_ENABLED(HANDOFF)
 	struct spl_handoff *ho = gd->spl_handoff;
 
arch/x86/lib/fsp2/fsp_init.c +1 -1
index da9bd6b45c..c7dc2ea257 100644
@@ -23,7 +23,7 @@ int arch_cpu_init_dm(void)
 	int ret;
 
 	/* Make sure pads are set up early in U-Boot */
-	if (spl_phase() != PHASE_BOARD_F)
+	if (!ll_boot_init() || spl_phase() != PHASE_BOARD_F)
 		return 0;
 
 	/* Probe all pinctrl devices to set up the pads */
Signature · 1 line
2.25.0.265.gbab2e86ba0-goog
#2 lore raw

PATCH v2 1/4 x86: fsp: Allow skipping init code when chain loading

Hi Simon,

Quoted 96 lines · Simon Glass

It is useful to be able to boot the same x86 image on a device with or without a first-stage bootloader. For example, with chromebook_coral, it is helpful for testing to be able to boot the same U-Boot (complete with FSP) on bare metal and from coreboot. It allows checking of things like CPU speed, comparing registers, ACPI tables and the like.

When U-Boot is not the first-stage bootloader much of this code is not needed and can break booting. Add checks for this to the FSP code.

Rather than checking for the amount of available SDRAM, just use 1GB in this situation, which should be safe. Using 2GB may run into a memory hole on some SoCs.

---

Changes in v2: None

 arch/x86/lib/fsp/fsp_dram.c     |  8 ++++++++
 arch/x86/lib/fsp/fsp_graphics.c |  3 +++
 arch/x86/lib/fsp2/fsp_dram.c    | 10 ++++++++++
 arch/x86/lib/fsp2/fsp_init.c    |  2 +-
 4 files changed, 22 insertions(+), 1 deletion(-)
arch/x86/lib/fsp/fsp_dram.c +8 -0
index 9ce0ddf0d3..15e82de2fe 100644
@@ -44,6 +44,14 @@ int dram_init_banksize(void)
        phys_addr_t low_end;
        uint bank;
 
+       if (!ll_boot_init()) {
+               gd->bd->bi_dram[0].start = 0;
+               gd->bd->bi_dram[0].size = gd->ram_size;
+
+               mtrr_add_request(MTRR_TYPE_WRBACK, 0, gd->ram_size);
+               return 0;
+       }
+
        low_end = 0;
        for (bank = 1, hdr = gd->arch.hob_list;
             bank < CONFIG_NR_DRAM_BANKS && !end_of_hob(hdr);
arch/x86/lib/fsp/fsp_graphics.c +3 -0
index 226c7e66b3..98b762209f 100644
@@ -78,6 +78,9 @@ static int fsp_video_probe(struct udevice *dev)
        struct vesa_mode_info *vesa = &mode_info.vesa;
        int ret;
 
+       if (!ll_boot_init())
+               return 0;
+
        printf("Video: ");
 
        /* Initialize vesa_mode_info structure */
arch/x86/lib/fsp2/fsp_dram.c +10 -0
index 90a238a224..74835eebce 100644
@@ -12,11 +12,18 @@
 #include <asm/fsp/fsp_support.h>
 #include <asm/fsp2/fsp_api.h>
 #include <asm/fsp2/fsp_internal.h>
+#include <linux/sizes.h>
 
 int dram_init(void)
 {
        int ret;
 
+       if (!ll_boot_init()) {
+               /* Use a small and safe amount of 1GB */
+               gd->ram_size = SZ_1G;
+
+               return 0;
+       }
        if (spl_phase() == PHASE_SPL) {
 #ifdef CONFIG_HAVE_ACPI_RESUME
                bool s3wake = gd->arch.prev_sleep_state == ACPI_S3;
@@ -68,6 +75,9 @@ int dram_init(void)
 
 ulong board_get_usable_ram_top(ulong total_size)
 {
+       if (!ll_boot_init())
+               return gd->ram_size;
+
 #if CONFIG_IS_ENABLED(HANDOFF)
        struct spl_handoff *ho = gd->spl_handoff;
 
arch/x86/lib/fsp2/fsp_init.c +0 -0
index da9bd6b45c..c7dc2ea257 100644

arch/x86/lib/fsp2/fsp_init.c int arch_cpu_init_dm(void)

Quoted 9 lines
arch/x86/lib/fsp2/fsp_init.c +1 -2
@@ -23,7 +23,7 @@ int arch_cpu_init_dm(void)
        int ret;
 
        /* Make sure pads are set up early in U-Boot */
-       if (spl_phase() != PHASE_BOARD_F)
+       if (!ll_boot_init() || spl_phase() != PHASE_BOARD_F)
                return 0;
 
        /* Probe all pinctrl devices to set up the pads */
--

I assume the proposed ll_boot_init() debug only works with FSP2, right?

I still would like to use the gd->flags instead of ll_boot_init().

Besides, I think the x86 doc need be updated to describe the purpose and usage, using one board as an example.

Regards,
Bin

#3 lore raw

PATCH v2 1/4 x86: fsp: Allow skipping init code when chain loading

Hi Bin,

Quoted 112 lines · Bin Meng

Hi Simon,

Quoted 96 lines · Simon Glass

It is useful to be able to boot the same x86 image on a device with or without a first-stage bootloader. For example, with chromebook_coral, it is helpful for testing to be able to boot the same U-Boot (complete with FSP) on bare metal and from coreboot. It allows checking of things like CPU speed, comparing registers, ACPI tables and the like.

When U-Boot is not the first-stage bootloader much of this code is not needed and can break booting. Add checks for this to the FSP code.

Rather than checking for the amount of available SDRAM, just use 1GB in this situation, which should be safe. Using 2GB may run into a memory hole on some SoCs.

---

Changes in v2: None

 arch/x86/lib/fsp/fsp_dram.c     |  8 ++++++++
 arch/x86/lib/fsp/fsp_graphics.c |  3 +++
 arch/x86/lib/fsp2/fsp_dram.c    | 10 ++++++++++
 arch/x86/lib/fsp2/fsp_init.c    |  2 +-
 4 files changed, 22 insertions(+), 1 deletion(-)
arch/x86/lib/fsp/fsp_dram.c +8 -0
index 9ce0ddf0d3..15e82de2fe 100644
@@ -44,6 +44,14 @@ int dram_init_banksize(void)
        phys_addr_t low_end;
        uint bank;
 
+       if (!ll_boot_init()) {
+               gd->bd->bi_dram[0].start = 0;
+               gd->bd->bi_dram[0].size = gd->ram_size;
+
+               mtrr_add_request(MTRR_TYPE_WRBACK, 0, gd->ram_size);
+               return 0;
+       }
+
        low_end = 0;
        for (bank = 1, hdr = gd->arch.hob_list;
             bank < CONFIG_NR_DRAM_BANKS && !end_of_hob(hdr);
arch/x86/lib/fsp/fsp_graphics.c +3 -0
index 226c7e66b3..98b762209f 100644
@@ -78,6 +78,9 @@ static int fsp_video_probe(struct udevice *dev)
        struct vesa_mode_info *vesa = &mode_info.vesa;
        int ret;
 
+       if (!ll_boot_init())
+               return 0;
+
        printf("Video: ");
 
        /* Initialize vesa_mode_info structure */
arch/x86/lib/fsp2/fsp_dram.c +10 -0
index 90a238a224..74835eebce 100644
@@ -12,11 +12,18 @@
 #include <asm/fsp/fsp_support.h>
 #include <asm/fsp2/fsp_api.h>
 #include <asm/fsp2/fsp_internal.h>
+#include <linux/sizes.h>
 
 int dram_init(void)
 {
        int ret;
 
+       if (!ll_boot_init()) {
+               /* Use a small and safe amount of 1GB */
+               gd->ram_size = SZ_1G;
+
+               return 0;
+       }
        if (spl_phase() == PHASE_SPL) {
 #ifdef CONFIG_HAVE_ACPI_RESUME
                bool s3wake = gd->arch.prev_sleep_state == ACPI_S3;
@@ -68,6 +75,9 @@ int dram_init(void)
 
 ulong board_get_usable_ram_top(ulong total_size)
 {
+       if (!ll_boot_init())
+               return gd->ram_size;
+
 #if CONFIG_IS_ENABLED(HANDOFF)
        struct spl_handoff *ho = gd->spl_handoff;
 
arch/x86/lib/fsp2/fsp_init.c +0 -0
index da9bd6b45c..c7dc2ea257 100644

arch/x86/lib/fsp2/fsp_init.c int arch_cpu_init_dm(void)

Quoted 9 lines
arch/x86/lib/fsp2/fsp_init.c +1 -2
@@ -23,7 +23,7 @@ int arch_cpu_init_dm(void)
        int ret;
 
        /* Make sure pads are set up early in U-Boot */
-       if (spl_phase() != PHASE_BOARD_F)
+       if (!ll_boot_init() || spl_phase() != PHASE_BOARD_F)
                return 0;
 
        /* Probe all pinctrl devices to set up the pads */
--

I assume the proposed ll_boot_init() debug only works with FSP2, right?

Quoted 4 lines

I still would like to use the gd->flags instead of ll_boot_init().

Besides, I think the x86 doc need be updated to describe the purpose and usage, using one board as an example.

OK I ill take a look and see if I can detect booting from coreboot at least, and set the flag.

BTW what is next with the ACPI series?

Regards,
Simon

#4 lore raw

PATCH v2 2/4 x86: apl: Skip init code when chain loading

In reply to Simon Glass

When U-Boot is not the first-stage bootloader the FSP-S init must be skipped. Update it to add a check.

---

Changes in v2: None

 arch/x86/cpu/apollolake/fsp_s.c | 2 ++
 1 file changed, 2 insertions(+)
arch/x86/cpu/apollolake/fsp_s.c +2 -0
index b2d9130841..3ee816f44b 100644
@@ -565,6 +565,8 @@ int arch_fsp_init_r(void)
 	struct udevice *dev, *itss;
 	int ret;
 
+	if (!ll_boot_init())
+		return 0;
 	/*
 	 * This must be called before any devices are probed. Put any probing
 	 * into arch_fsps_preinit() above.
Signature · 1 line
2.25.0.265.gbab2e86ba0-goog
#5 lore raw

PATCH v2 3/4 x86: cpu: Skip init code when chain loading

In reply to Simon Glass

When U-Boot is not the first-stage bootloader the interrupt and cache init must be skipped, as well as init for various peripherals. Update the code to add checks for this.

---

Changes in v2:
- Drop the other check in interrupt_init() which is not needed now

 arch/x86/cpu/cpu.c            | 4 +++-
 arch/x86/cpu/i386/interrupt.c | 6 ++++--
 arch/x86/lib/init_helpers.c   | 3 +++
 3 files changed, 10 insertions(+), 3 deletions(-)
arch/x86/cpu/cpu.c +3 -1
index dae06949cc..3db035c2c0 100644
@@ -239,8 +239,10 @@ int cpu_init_r(void)
 	struct udevice *dev;
 	int ret;
 
-	if (!ll_boot_init())
+	if (!ll_boot_init()) {
+		uclass_first_device(UCLASS_PCI, &dev);
 		return 0;
+	}
 
 	ret = x86_init_cpus();
 	if (ret)
arch/x86/cpu/i386/interrupt.c +4 -2
index 4c7e9ea215..e67a116ac1 100644
@@ -264,6 +264,9 @@ int interrupt_init(void)
 	struct udevice *dev;
 	int ret;
 
+	if (!ll_boot_init())
+		return 0;
+
 	/* Try to set up the interrupt router, but don't require one */
 	ret = irq_first_device_type(X86_IRQT_BASE, &dev);
 	if (ret && ret != -ENODEV)
@@ -295,8 +298,7 @@ int interrupt_init(void)
 	 * TODO(sjg at chromium.org): But we don't handle these correctly when
 	 * booted from EFI.
 	 */
-	if (ll_boot_init())
-		enable_interrupts();
+	enable_interrupts();
 #endif
 
 	return 0;
arch/x86/lib/init_helpers.c +3 -0
index 5bb55e256f..d906b528b3 100644
@@ -30,6 +30,9 @@ int init_cache_f_r(void)
 			return ret;
 	}
 
+	if (!ll_boot_init())
+		return 0;
+
 	/* Initialise the CPU cache(s) */
 	return init_cache();
 }
Signature · 1 line
2.25.0.265.gbab2e86ba0-goog
#6 lore raw

PATCH v2 4/4 pci: Avoid auto-config when chain loading

In reply to Simon Glass

When U-Boot is not the first-stage bootloader we don't want to re-configure the PCI devices, since this has already been done. Add a check to avoid this.

---

Changes in v2:
- Drop patch 'dm: Avoid initing built-in devices when chain loading'

 drivers/pci/pci-uclass.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/pci/pci-uclass.c +2 -2
index 5be2dfd0bf..0ad63b41ac 100644
@@ -1004,7 +1004,7 @@ static int pci_uclass_post_probe(struct udevice *bus)
 	if (ret)
 		return ret;
 
-	if (CONFIG_IS_ENABLED(PCI_PNP) &&
+	if (CONFIG_IS_ENABLED(PCI_PNP) && ll_boot_init() &&
 	    (!hose->skip_auto_config_until_reloc ||
 	     (gd->flags & GD_FLG_RELOC))) {
 		ret = pci_auto_config_devices(bus);
@@ -1026,7 +1026,7 @@ static int pci_uclass_post_probe(struct udevice *bus)
 	 * Note we only call this 1) after U-Boot is relocated, and 2)
 	 * root bus has finished probing.
 	 */
-	if ((gd->flags & GD_FLG_RELOC) && (bus->seq == 0)) {
+	if ((gd->flags & GD_FLG_RELOC) && bus->seq == 0 && ll_boot_init()) {
 		ret = fsp_init_phase_pci();
 		if (ret)
 			return ret;
Signature · 1 line
2.25.0.265.gbab2e86ba0-goog
#7 lore raw

v2 cover x86: Improve support for chain-loading U-Boot

In reply to Simon Glass
Quoted 15 lines · Simon Glass

This little series adds a few checks into the code to allow better operation when booting a build from a previous-state loader such as coreboot.

At present we have a 'coreboot' target but this runs very different code from the bare-metal targets, such as coral. There is very little in common between them.

It is useful to be able to boot the same U-Boot on a device, with or without a first-stage bootloader. For example, with chromebook_coral, it is helpful for testing to be able to boot the same U-Boot (complete with FSP) on bare metal and from coreboot. It allows checking of things like CPU speed, comparing registers, ACPI tables and the like.

Quoted 5 lines

The idea is to change ll_boot_init() to false, and rebuild without changing anything else.

This series makes the most important changes to allow coral to boot on coreboot.

Is there any patchwork instance or branch which I may use for testing?

Quoted 24 lines

Changes in v2:
- Drop the other check in interrupt_init() which is not needed now
- Drop patch 'dm: Avoid initing built-in devices when chain loading'

Simon Glass (4):
x86: fsp: Allow skipping init code when chain loading
x86: apl: Skip init code when chain loading
x86: cpu: Skip init code when chain loading
pci: Avoid auto-config when chain loading

 arch/x86/cpu/apollolake/fsp_s.c |  2 ++
 arch/x86/cpu/cpu.c              |  4 +++-
 arch/x86/cpu/i386/interrupt.c   |  6 ++++--
 arch/x86/lib/fsp/fsp_dram.c     |  8 ++++++++
 arch/x86/lib/fsp/fsp_graphics.c |  3 +++
 arch/x86/lib/fsp2/fsp_dram.c    | 10 ++++++++++
 arch/x86/lib/fsp2/fsp_init.c    |  2 +-
 arch/x86/lib/init_helpers.c     |  3 +++
 drivers/pci/pci-uclass.c        |  4 ++--
 9 files changed, 36 insertions(+), 6 deletions(-)

--
2.25.0.265.gbab2e86ba0-goog

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#8 lore raw

v2 cover x86: Improve support for chain-loading U-Boot

Hi Andy,

Quoted 17 lines · Andy Shevchenko
Quoted 15 lines · Simon Glass

This little series adds a few checks into the code to allow better operation when booting a build from a previous-state loader such as coreboot.

At present we have a 'coreboot' target but this runs very different code from the bare-metal targets, such as coral. There is very little in common between them.

It is useful to be able to boot the same U-Boot on a device, with or without a first-stage bootloader. For example, with chromebook_coral, it is helpful for testing to be able to boot the same U-Boot (complete with FSP) on bare metal and from coreboot. It allows checking of things like CPU speed, comparing registers, ACPI tables and the like.

Quoted 7 lines
Quoted 5 lines

The idea is to change ll_boot_init() to false, and rebuild without changing anything else.

This series makes the most important changes to allow coral to boot on coreboot.

Is there any patchwork instance or branch which I may use for testing?

Yes I always push to u-boot-dm before sending.

This one is in branch cor3chain-working

It will be collected into patchwork automatically, normally a few minutes after sending.

Regards,
Simon