iommu/iova: Support limiting IOVA alignment
Subsystems (2)
RFC PATCH 1/1 iommu/iova: Support limiting IOVA alignment
When the IOVA framework applies IOVA alignment it aligns all IOVAs to the smallest PAGE_SIZE order which is greater than or equal to the requested IOVA size.
We support use cases that requires large buffers (> 64 MB in size) to be allocated and mapped in their stage 1 page tables. However, with this alignment scheme we find ourselves running out of IOVA space for 32 bit devices, so we are proposing this config, along the similar vein as CONFIG_CMA_ALIGNMENT for CMA allocations.
Add CONFIG_IOMMU_LIMIT_IOVA_ALIGNMENT to limit the alignment of IOVAs to some desired PAGE_SIZE order, specified by CONFIG_IOMMU_IOVA_ALIGNMENT. This helps reduce the impact of fragmentation caused by the current IOVA alignment scheme, and gives better IOVA space utilization.
--- drivers/iommu/Kconfig | 31 +++++++++++++++++++++++++++++++ drivers/iommu/iova.c | 20 +++++++++++++++++++- 2 files changed, 50 insertions(+), 1 deletion(-)
drivers/iommu/Kconfig +31 -0
@@ -3,6 +3,37 @@ config IOMMU_IOVA tristate +if IOMMU_IOVA + +config IOMMU_LIMIT_IOVA_ALIGNMENT + bool "Limit IOVA alignment" + help + When the IOVA framework applies IOVA alignment it aligns all + IOVAs to the smallest PAGE_SIZE order which is greater than or + equal to the requested IOVA size. This works fine for sizes up + to several MiB, but for larger sizes it results in address + space wastage and fragmentation. For example drivers with a 4 + GiB IOVA space might run out of IOVA space when allocating + buffers great than 64 MiB. + + Enable this option to impose a limit on the alignment of IOVAs. + + If unsure, say N. + +config IOMMU_IOVA_ALIGNMENT + int "Maximum PAGE_SIZE order of alignment for IOVAs" + depends on IOMMU_LIMIT_IOVA_ALIGNMENT + range 4 9 + default 9 + help + With this parameter you can specify the maximum PAGE_SIZE order for + IOVAs. Larger IOVAs will be aligned only to this specified order. + The order is expressed a power of two multiplied by the PAGE_SIZE. + + If unsure, leave the default value "9". + +endif + # The IOASID library may also be used by non-IOMMU_API users config IOASID tristate
drivers/iommu/iova.c +19 -1
@@ -177,6 +177,24 @@ int init_iova_flush_queue(struct iova_domain *iovad,rb_insert_color (&iova->node, root); } +#ifdef CONFIG_IOMMU_LIMIT_IOVA_ALIGNMENT +static unsigned long limit_align_shift (struct iova_domain *iovad, +unsigned long shift) +{ +unsigned long max_align_shift; + + max_align_shift =CONFIG_IOMMU_IOVA_ALIGNMENT +PAGE_SHIFT + -iova_shift (iovad); + return min_t(unsigned long, max_align_shift, shift); +} +#else +static unsigned long limit_align_shift (struct iova_domain *iovad, +unsigned long shift) +{ +return shift; +} +#endif +static int __alloc_and_insert_iova_range (struct iova_domain *iovad,unsigned long size,unsigned long limit_pfn,struct iova *new,bool size_aligned)
@@ -188,7 +206,7 @@ static int __alloc_and_insert_iova_range(struct iova_domain *iovad,unsigned long align_mask = ~0UL ;if (size_aligned) - align_mask <<=fls_long (size -1 ); + align_mask <<=limit_align_shift (iovad,fls_long (size -1 ));/* Walk the tree backwards */ spin_lock_irqsave (&iovad->iova_rbtree_lock, flags);
Signature · 2 lines
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
Robin Murphy
maintainerQuoted 11 lines · Liam Mark
When the IOVA framework applies IOVA alignment it aligns all IOVAs to the smallest
PAGE_SIZEorder which is greater than or equal to the requested IOVA size.We support use cases that requires large buffers (> 64 MB in size) to be allocated and mapped in their stage 1 page tables. However, with this alignment scheme we find ourselves running out of IOVA space for 32 bit devices, so we are proposing this config, along the similar vein as
CONFIG_CMA_ALIGNMENTfor CMA allocations.
As per [1], I'd really like to better understand the allocation patterns that lead to such a sparsely-occupied address space to begin with, given that the rbtree allocator is supposed to try to maintain locality as far as possible, and the rcaches should further improve on that. Are you also frequently cycling intermediate-sized buffers which are smaller than 64MB but still too big to be cached? Are there a lot of non-power-of-two allocations?
Quoted 5 lines
Add
CONFIG_IOMMU_LIMIT_IOVA_ALIGNMENTto limit the alignment of IOVAs to some desiredPAGE_SIZEorder, specified byCONFIG_IOMMU_IOVA_ALIGNMENT. This helps reduce the impact of fragmentation caused by the current IOVA alignment scheme, and gives better IOVA space utilization.
Even if the general change did prove reasonable, this IOVA allocator is not owned by the DMA API, so entirely removing the option of strict size-alignment feels a bit uncomfortable. Personally I'd replace the bool argument with an actual alignment value to at least hand the authority out to individual callers.
Furthermore, even in DMA API terms, is anyone really ever going to bother tuning that config? Since iommu-dma is supposed to be a transparent layer, arguably it shouldn't behave unnecessarily differently from CMA, so simply piggy-backing off CONFIG_CMA_ALIGNMENT would seem logical.
Robin.
[1] https://lore.kernel.org/linux-iommu/[email protected]/
Quoted 87 lines
Signed-off-by Liam Mark <[email protected]>--- drivers/iommu/Kconfig | 31 +++++++++++++++++++++++++++++++ drivers/iommu/iova.c | 20 +++++++++++++++++++- 2 files changed, 50 insertions(+), 1 deletion(-)drivers/iommu/Kconfig +31
-0@@ -3,6 +3,37 @@ config IOMMU_IOVA tristate +if IOMMU_IOVA + +config IOMMU_LIMIT_IOVA_ALIGNMENT + bool "Limit IOVA alignment" + help + When the IOVA framework applies IOVA alignment it aligns all + IOVAs to the smallest PAGE_SIZE order which is greater than or + equal to the requested IOVA size. This works fine for sizes up + to several MiB, but for larger sizes it results in address + space wastage and fragmentation. For example drivers with a 4 + GiB IOVA space might run out of IOVA space when allocating + buffers great than 64 MiB. + + Enable this option to impose a limit on the alignment of IOVAs. + + If unsure, say N. + +config IOMMU_IOVA_ALIGNMENT + int "Maximum PAGE_SIZE order of alignment for IOVAs" + depends on IOMMU_LIMIT_IOVA_ALIGNMENT + range 4 9 + default 9 + help + With this parameter you can specify the maximum PAGE_SIZE order for + IOVAs. Larger IOVAs will be aligned only to this specified order. + The order is expressed a power of two multiplied by the PAGE_SIZE. + + If unsure, leave the default value "9". + +endif + # The IOASID library may also be used by non-IOMMU_API users config IOASID tristatedrivers/iommu/iova.c +19
-1@@ -177,6 +177,24 @@ int init_iova_flush_queue(struct iova_domain *iovad,rb_insert_color (&iova->node, root); } +#ifdef CONFIG_IOMMU_LIMIT_IOVA_ALIGNMENT +static unsigned long limit_align_shift (struct iova_domain *iovad, +unsigned long shift) +{ +unsigned long max_align_shift; + + max_align_shift =CONFIG_IOMMU_IOVA_ALIGNMENT +PAGE_SHIFT + -iova_shift (iovad); + return min_t(unsigned long, max_align_shift, shift); +} +#else +static unsigned long limit_align_shift (struct iova_domain *iovad, +unsigned long shift) +{ +return shift; +} +#endif +static int __alloc_and_insert_iova_range (struct iova_domain *iovad,unsigned long size,unsigned long limit_pfn,struct iova *new,bool size_aligned)@@ -188,7 +206,7 @@ static int __alloc_and_insert_iova_range(struct iova_domain *iovad,unsigned long align_mask = ~0UL ;if (size_aligned) - align_mask <<=fls_long (size -1 ); + align_mask <<=limit_align_shift (iovad,fls_long (size -1 ));/* Walk the tree backwards */ spin_lock_irqsave (&iovad->iova_rbtree_lock, flags);
Will Deacon
maintainerQuoted 13 lines · Robin Murphy
Quoted 11 lines · Liam Mark
When the IOVA framework applies IOVA alignment it aligns all IOVAs to the smallest
PAGE_SIZEorder which is greater than or equal to the requested IOVA size.We support use cases that requires large buffers (> 64 MB in size) to be allocated and mapped in their stage 1 page tables. However, with this alignment scheme we find ourselves running out of IOVA space for 32 bit devices, so we are proposing this config, along the similar vein as
CONFIG_CMA_ALIGNMENTfor CMA allocations.
Quoted 7 lines
As per [1], I'd really like to better understand the allocation patterns that lead to such a sparsely-occupied address space to begin with, given that the rbtree allocator is supposed to try to maintain locality as far as possible, and the rcaches should further improve on that. Are you also frequently cycling intermediate-sized buffers which are smaller than 64MB but still too big to be cached? Are there a lot of non-power-of-two allocations?
Right, information on the allocation pattern would help with this change and also the choice of IOVA allocation algorithm. Without it, we're just shooting in the dark.
Quoted 12 lines
Quoted 5 lines
Add
CONFIG_IOMMU_LIMIT_IOVA_ALIGNMENTto limit the alignment of IOVAs to some desiredPAGE_SIZEorder, specified byCONFIG_IOMMU_IOVA_ALIGNMENT. This helps reduce the impact of fragmentation caused by the current IOVA alignment scheme, and gives better IOVA space utilization.Even if the general change did prove reasonable, this IOVA allocator is not owned by the DMA API, so entirely removing the option of strict size-alignment feels a bit uncomfortable. Personally I'd replace the bool argument with an actual alignment value to at least hand the authority out to individual callers.
Quoted 4 lines
Furthermore, even in DMA API terms, is anyone really ever going to bother tuning that config? Since iommu-dma is supposed to be a transparent layer, arguably it shouldn't behave unnecessarily differently from CMA, so simply piggy-backing off
CONFIG_CMA_ALIGNMENTwould seem logical.
Agreed, reusing CONFIG_CMA_ALIGNMENT makes a lot of sense here as callers relying on natural alignment of DMA buffer allocations already have to deal with that limitation. We could fix it as an optional parameter at init time (init_iova_domain()), and have the DMA IOMMU implementation pass it in there.
Will
Quoted 22 lines · Will Deacon
Quoted 13 lines · Robin Murphy
Quoted 11 lines · Liam Mark
When the IOVA framework applies IOVA alignment it aligns all IOVAs to the smallest
PAGE_SIZEorder which is greater than or equal to the requested IOVA size.We support use cases that requires large buffers (> 64 MB in size) to be allocated and mapped in their stage 1 page tables. However, with this alignment scheme we find ourselves running out of IOVA space for 32 bit devices, so we are proposing this config, along the similar vein as
CONFIG_CMA_ALIGNMENTfor CMA allocations.Quoted 7 lines
As per [1], I'd really like to better understand the allocation patterns that lead to such a sparsely-occupied address space to begin with, given that the rbtree allocator is supposed to try to maintain locality as far as possible, and the rcaches should further improve on that. Are you also frequently cycling intermediate-sized buffers which are smaller than 64MB but still too big to be cached? Are there a lot of non-power-of-two allocations?
Quoted 4 lines
Right, information on the allocation pattern would help with this change and also the choice of IOVA allocation algorithm. Without it, we're just shooting in the dark.
Thanks for the responses.
I am looking into how much of our allocation pattern details I can share.
My general understanding is that this issue occurs on a 32bit devices which have additional restrictions on the IOVA range they can use within those 32bits.
An example is a use case which involves allocating a lot of buffers ~80MB is size, the current algorithm will require an alignment of 128MB for those buffers. My understanding is that it simply can't accommodate the number of 80MB buffers that are required because the of amount of IOVA space which can't be used because of the 128MB alignment requirement.
Quoted 17 lines
Quoted 12 lines
Quoted 5 lines
Add
CONFIG_IOMMU_LIMIT_IOVA_ALIGNMENTto limit the alignment of IOVAs to some desiredPAGE_SIZEorder, specified byCONFIG_IOMMU_IOVA_ALIGNMENT. This helps reduce the impact of fragmentation caused by the current IOVA alignment scheme, and gives better IOVA space utilization.Even if the general change did prove reasonable, this IOVA allocator is not owned by the DMA API, so entirely removing the option of strict size-alignment feels a bit uncomfortable. Personally I'd replace the bool argument with an actual alignment value to at least hand the authority out to individual callers.
Quoted 4 lines
Furthermore, even in DMA API terms, is anyone really ever going to bother tuning that config? Since iommu-dma is supposed to be a transparent layer, arguably it shouldn't behave unnecessarily differently from CMA, so simply piggy-backing off
CONFIG_CMA_ALIGNMENTwould seem logical.
Quoted 6 lines
Agreed, reusing
CONFIG_CMA_ALIGNMENTmakes a lot of sense here as callers relying on natural alignment of DMA buffer allocations already have to deal with that limitation. We could fix it as an optional parameter at init time (init_iova_domain()), and have the DMA IOMMU implementation pass it in there.
My concern with using CONFIG_CMA_ALIGNMENT alignment is that for us this would either involve further fragmenting our CMA regions (moving our CMA max alignment from 1MB to max 2MB) or losing so of our 2MB IOVA block mappings (changing our IOVA max alignment form 2MB to 1MB).
At least for us CMA allocations are often not DMA mapped into stage 1 page tables so moving the CMA max alignment to 2MB in our case would, I think, only provide the disadvantage of having to increase the size our CMA regions to accommodate this large alignment (which isn’t optimal for memory utilization since CMA regions can't satisfy unmovable page allocations).
As an alternative would it be possible for the dma-iommu layer to use the size of the allocation and the domain pgsize_bitmap field to pick a max IOVA alignment, which it can pass in for that IOVA allocation, which will maximize block mappings but not waste IOVA space?
Liam
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu
Quoted 1 line · Liam Mark
I am looking into how much of our allocation pattern details I can share.
Well if you can't share the details it is by defintion completely irrelevant. Please don't waste our time.
Robin Murphy
maintainerQuoted 37 lines · Liam Mark
Quoted 22 lines · Will Deacon
Quoted 13 lines · Robin Murphy
Quoted 11 lines · Liam Mark
When the IOVA framework applies IOVA alignment it aligns all IOVAs to the smallest
PAGE_SIZEorder which is greater than or equal to the requested IOVA size.We support use cases that requires large buffers (> 64 MB in size) to be allocated and mapped in their stage 1 page tables. However, with this alignment scheme we find ourselves running out of IOVA space for 32 bit devices, so we are proposing this config, along the similar vein as
CONFIG_CMA_ALIGNMENTfor CMA allocations.Quoted 7 lines
As per [1], I'd really like to better understand the allocation patterns that lead to such a sparsely-occupied address space to begin with, given that the rbtree allocator is supposed to try to maintain locality as far as possible, and the rcaches should further improve on that. Are you also frequently cycling intermediate-sized buffers which are smaller than 64MB but still too big to be cached? Are there a lot of non-power-of-two allocations?
Quoted 4 lines
Right, information on the allocation pattern would help with this change and also the choice of IOVA allocation algorithm. Without it, we're just shooting in the dark.
Thanks for the responses.
I am looking into how much of our allocation pattern details I can share.
My general understanding is that this issue occurs on a 32bit devices which have additional restrictions on the IOVA range they can use within those 32bits.
Quoted 5 lines
An example is a use case which involves allocating a lot of buffers ~80MB is size, the current algorithm will require an alignment of 128MB for those buffers. My understanding is that it simply can't accommodate the number of 80MB buffers that are required because the of amount of IOVA space which can't be used because of the 128MB alignment requirement.
OK, that's a case I can understand :)
Quoted 36 lines
Quoted 17 lines
Quoted 12 lines
Quoted 5 lines
Add
CONFIG_IOMMU_LIMIT_IOVA_ALIGNMENTto limit the alignment of IOVAs to some desiredPAGE_SIZEorder, specified byCONFIG_IOMMU_IOVA_ALIGNMENT. This helps reduce the impact of fragmentation caused by the current IOVA alignment scheme, and gives better IOVA space utilization.Even if the general change did prove reasonable, this IOVA allocator is not owned by the DMA API, so entirely removing the option of strict size-alignment feels a bit uncomfortable. Personally I'd replace the bool argument with an actual alignment value to at least hand the authority out to individual callers.
Quoted 4 lines
Furthermore, even in DMA API terms, is anyone really ever going to bother tuning that config? Since iommu-dma is supposed to be a transparent layer, arguably it shouldn't behave unnecessarily differently from CMA, so simply piggy-backing off
CONFIG_CMA_ALIGNMENTwould seem logical.Quoted 6 lines
Agreed, reusing
CONFIG_CMA_ALIGNMENTmakes a lot of sense here as callers relying on natural alignment of DMA buffer allocations already have to deal with that limitation. We could fix it as an optional parameter at init time (init_iova_domain()), and have the DMA IOMMU implementation pass it in there.My concern with using
CONFIG_CMA_ALIGNMENTalignment is that for us this would either involve further fragmenting our CMA regions (moving our CMA max alignment from 1MB to max 2MB) or losing so of our 2MB IOVA block mappings (changing our IOVA max alignment form 2MB to 1MB).At least for us CMA allocations are often not DMA mapped into stage 1 page tables so moving the CMA max alignment to 2MB in our case would, I think, only provide the disadvantage of having to increase the size our CMA regions to accommodate this large alignment (which isn’t optimal for memory utilization since CMA regions can't satisfy unmovable page allocations).
Quoted 4 lines
As an alternative would it be possible for the dma-iommu layer to use the size of the allocation and the domain
pgsize_bitmapfield to pick a max IOVA alignment, which it can pass in for that IOVA allocation, which will maximize block mappings but not waste IOVA space?
Given that we already have DMA_ATTR_ALOC_SINGLE_PAGES for video drivers and suchlike that know enough to know they want "large buffer" allocation behaviour, would it suffice to have a similar attribute that says "I'm not too fussed about alignment"? That way there's no visible change for anyone who doesn't opt in and might be relying on the existing behaviour, intentionally or otherwise.
Then if necessary, the implementation can consider both flags together to decide whether to try to round down to the next block size or just shove it in anywhere.
Robin.
Quoted 54 lines · Robin Murphy
Quoted 42 lines
Quoted 23 lines
Quoted 15 lines
Quoted 5 lines
Add
CONFIG_IOMMU_LIMIT_IOVA_ALIGNMENTto limit the alignment of IOVAs to some desiredPAGE_SIZEorder, specified byCONFIG_IOMMU_IOVA_ALIGNMENT. This helps reduce the impact of fragmentation caused by the current IOVA alignment scheme, and gives better IOVA space utilization.Even if the general change did prove reasonable, this IOVA allocator is not
owned by the DMA API, so entirely removing the option of strict size-alignment feels a bit uncomfortable. Personally I'd replace the bool
argument with an actual alignment value to at least hand the authority out
to individual callers.Quoted 7 lines
Furthermore, even in DMA API terms, is anyone really ever going to bother
tuning that config? Since iommu-dma is supposed to be a transparent layer,
arguably it shouldn't behave unnecessarily differently from CMA, so simply
piggy-backing offCONFIG_CMA_ALIGNMENTwould seem logical.Quoted 6 lines
Agreed, reusing
CONFIG_CMA_ALIGNMENTmakes a lot of sense here as callers relying on natural alignment of DMA buffer allocations already have to deal with that limitation. We could fix it as an optional parameter at init time (init_iova_domain()), and have the DMA IOMMU implementation pass it in there.My concern with using
CONFIG_CMA_ALIGNMENTalignment is that for us this would either involve further fragmenting our CMA regions (moving our CMA max alignment from 1MB to max 2MB) or losing so of our 2MB IOVA block mappings (changing our IOVA max alignment form 2MB to 1MB).At least for us CMA allocations are often not DMA mapped into stage 1 page tables so moving the CMA max alignment to 2MB in our case would, I think, only provide the disadvantage of having to increase the size our CMA regions to accommodate this large alignment (which isn’t optimal for memory utilization since CMA regions can't satisfy unmovable page allocations).
Quoted 4 lines
As an alternative would it be possible for the dma-iommu layer to use the size of the allocation and the domain
pgsize_bitmapfield to pick a max IOVA alignment, which it can pass in for that IOVA allocation, which will maximize block mappings but not waste IOVA space?Given that we already have
DMA_ATTR_ALOC_SINGLE_PAGESfor video drivers and suchlike that know enough to know they want "large buffer" allocation behaviour, would it suffice to have a similar attribute that says "I'm not too fussed about alignment"? That way there's no visible change for anyone who doesn't opt in and might be relying on the existing behaviour, intentionally or otherwise.
Quoted 4 lines
Then if necessary, the implementation can consider both flags together to decide whether to try to round down to the next block size or just shove it in anywhere.
This should work for us.
My only concern is that many of our users would be using DMA-Buf memory, so DMA mapping would be done using dma_buf_map_attachment which I believe still doesn't support specifying any DMA attributes.
I had previously tried to get support added upstream but wasn't successful.
https://lkml.org/lkml/2019/1/18/826
https://lkml.org/lkml/2019/1/18/827
But perhaps this new attribute will provide enough justification for DMA attributes (in some form, either explicitly or via flags) to be supported via dma_buf_map_attachment.
Liam
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project