usb: dwc3: gadget: Update chain bit correctly when using sg list
Subsystems (3)
PATCH v2 1/1 usb: dwc3: gadget: Update chain bit correctly when using sg list
From: Pratham Pratap <[email protected]>
If scatter-gather operation is allowed, a large USB request is split into multiple TRBs. For preparing TRBs for sg list, driver iterates over the list and creates TRB for each sg and mark the chain bit to false for the last sg. The current IOMMU driver is clubbing the list of sgs which shares a page boundary into one and giving it to USB driver. With this the number of sgs mapped it not equal to the the number of sgs passed. Because of this USB driver is not marking the chain bit to false since it couldn't iterate to the last sg. This patch addresses this issue by marking the chain bit to false if it is the last mapped sg.
At a practical level, this patch resolves USB transfer stalls seen with adb on dwc3 based db845c, pixel3 and other qcom hardware after functionfs gadget added scatter-gather support around v4.20.
Credit also to Anurag Kumar Vulisha <[email protected]> who implemented a very similar fix to this issue.
[jstultz: Slight tweak to remove sg_is_last() usage, reworked
commit message, minor comment tweak]
---
v2:
* Fix typeos and unnecssary parens as suggested by Jack
--- drivers/usb/dwc3/gadget.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/usb/dwc3/gadget.c +8 -1
@@ -1071,7 +1071,14 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,unsigned int rem = length % maxp;unsigned chain = true; -if (sg_is_last (s)) +/* +* IOMMU driver is coalescing the list of sgs which shares a +* page boundary into one and giving it to USB driver. With +* this the number of sgs mapped is not equal to the number of +* sgs passed. So mark the chain bit to false if it isthe last +* mapped sg. +*/ +if (i == remaining -1 ) chain = false;if (rem &&usb_endpoint_dir_out (dep->endpoint.desc) && !chain) {
Signature · 1 line
2.17.1
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 31 lines · Sasha Levin
Hi,
[This is an automated email]
This commit has been processed because it contains a -stable tag. The stable tag indicates that it's relevant for the following trees: all
The bot has tested the following trees: v5.5.4, v5.4.20, v4.19.104, v4.14.171, v4.9.214, v4.4.214.
v5.5.4: Build OK!
v5.4.20: Build OK!
v4.19.104: Build OK!
v4.14.171: Build failed! Errors:
drivers/usb/dwc3/gadget.c:1098:12: error:remainingundeclared (first use in this function)v4.9.214: Failed to apply! Possible dependencies:
Unable to calculatev4.4.214: Failed to apply! Possible dependencies:
36b68aae8e39("usb: dwc3: gadget: use link TRB for all endpoint types")4faf75504a7d("usb: dwc3: gadget: move % operation to increment helpers")53fd88189e08("usb: dwc3: gadget: rename busy/free_slot to trb_enqueue/dequeue")5ee85d890f8d("usb: dwc3: gadget: split__dwc3_gadget_kick_transfer()")70fdb273db37("usb: dwc3: get rid ofDWC3_TRB_MASK")
8495036e986b("usb: dwc3: increase maximum number of TRBs per endpoint")c4233573f6ee("usb: dwc3: gadget: prepare TRBs on update transfers too")e901aa159dac("usb: dwc3: gadget: fix endpoint renaming")ef966b9d3353("usb: dwc3: gadget: add trb enqueue/dequeue helpers")
Quoted 3 lines
NOTE: The patch will not be queued to stable trees until it is upstream.
How should we proceed with this patch?
Sorry, I only see this change as critical for 4.20+ kernels (where it started biting folks), but I'd defer to Felipe if he'd like to see it go any further back.
thanks
-john